Formulation and evaluation of gastroretentive drug delivery system of propranolol hydrochloride

Advanced polymers and recent advancements on gastroretentive drug delivery system; a comprehensive review

Oral route of drug administration is typically the initial option for drug administration because it is both practical and affordable. However, major drawback of this route includes the release of drug at a specified place thus reduces the bioavailability. This could be overcome by utilising the gastroretentive drug delivery system (GRRDS). Prolonged stomach retention improves bioavailability and increases solubility for medicines that are unable to dissolve in high pH environments. Many recent advancements in the floating, bio adhesive, magnetic, expandable, raft forming and ion exchange systems have been made that had led towards advanced form of drug delivery. From the past few years, floating drug delivery system has been most commonly utilised for the delivery of drug in a delayed manner. Various polymers have been utilised for manufacturing of these systems, including alginates, chitosan, pectin, carrageenan's, xanthan gum, hydroxypropyl cellulose, carbomer, polyethylene oxide and sodium carboxy methyl cellulose. Chitosan, pectin and xanthan gum have been found to be most commonly used polymers in the manufacturing of drug inclusion complex for gastroretentive drug delivery. This study aimed to define various types and advanced polymers as well as also highlights recent advances and future perspectives of gastroretentive drug delivery system.

Potentials of ionic liquids to overcome physical and biological barriers

Over the last decades, ionic liquids (IL) have shown great potential in non-invasive delivery starting from synthetic small molecules to biological large molecules. ILs are emerging as a particular class of drug delivery systems due to their unique physiochemical properties, simple surface modification, and functionalization. These features of IL help achieve specific design principles that are essential for a non-invasive drug delivery system. In this review, we have discussed IL and their applications in non-invasive drug delivery systems. We evaluated state-of-the-art development and advances of IL aiming to mitigate the biological and physical barriers to improve transdermal and oral delivery, summarized in this review. We also provided an overview of the various factors determining the systemic transportation of IL-based formulation. Additionally, we have emphasized how the ILs facilitate the transportation of therapeutic molecules by overcoming biological barriers.

Fused Deposition Modelling 3D-Printed Gastro-Retentive Floating Device for Propranolol Hcl Tablets

Three-dimensional printing has revolutionized drug manufacturing and has provided a solution to the limitations associated with the conventional manufacturing method by designing complex drug delivery systems with customized drug release profiles for personalized therapies. The present investigation aims to design a gastric floating tablet with prolonged gastric floating time and sustained drug release profile. In the present study, a gastro retentive floating device (GRFD) was designed and fabricated using a fused deposition modelling (FDM)-based 3D printing technique. This device acts as a multifunctional dosage form exhibiting prolonged gastric retention time and sustained drug release profile with improved oral bioavailability in the upper gastrointestinal tract. Commercial polyvinyl alcohol (PVA) and polylactic acid (PLA) filaments were used to design GRFD, which was comprised of dual compartments. The outer sealed compartment acts as an air-filled chamber that imparts buoyancy to the device and the inner compartment is filled with a commercial propranolol hydrochloride immediate-release tablet. The device is designed as a round-shaped shell with a central opening of varying size (1 mm, 2 mm, 3 mm, and 4 mm), which acts as a drug release window. Scanning electron microscope (SEM) images were used to determine morphological characterization. The in vitro buoyancy and drug release were evaluated using the USP type II dissolution apparatus. All the designed GRFDs exhibit good floating ability and sustained drug release profiles. GRFDs fabricated using PLA filament show maximum buoyancy (>24 h) and sustained drug release for up to 10 h. The floating ability and drug release from the developed devices were governed by the drug release window opening size and the filament material affinity towards the gastric fluid. The designed GRFDs show great prospects in modifying the drug release characteristics and could be applied to any conventional immediate-release product.

Model-Informed drug development of gastroretentive release systems for sildenafil citrate

Gastroretentive drug delivery systems (GRDDS) are modified-release dosage forms designed to prolong their residence time in the upper gastrointestinal tract, where some drugs are preferentially absorbed, and increase the drug bioavailability. This work aimed the development of a novel GRDDS containing 60 mg of sildenafil citrate, and the evaluation of the feasibility of the proposed formulation for use in the treatment of pulmonary arterial hypertension (PAH), for once a day administration, by using in silico pharmacokinetic (PK) modeling and simulations using GastroPlus^TM. The Model-Informed Drug Development (MIDD) approach was used in formulation design and pharmacokinetic exposure prospecting. A 2² factorial design with a central point was used for optimization of the formulation, which was produced by direct compression and characterized by some tests, including buoyancy test, assay, impurities, and in vitro dissolution. A compartmental PK model was built using the GatroPlus^TM software for virtual bioequivalence of the proposed formulations in comparison with the defined target release profile provided by an immediate release (IR) tablet formulation containing 20 mg of sildenafil administered three times a day (TID). The results of the factorial design showed a direct correlation between the dissolution rate and the amount of hydroxypropyl methyl cellulose (HPMC) in the formulations. By comparing the PK parameters predicted by the virtual bioequivalence, the formulations F1, F2, F3 and F5 failed on bioequivalence. The F4 showed bioequivalence to the reference and was considered the viable formulation to substitute the IR. Thus, GRDDS could be a promising alternative for controlling the release of drugs with a pH-dependent solubility and narrow absorption window, specifically in the gastric environment, and an interesting way to reduce dose frequency and increase the drug bioavailability. The MIDD approach increases the level of information about the pharmaceutical product and guide the drug development for more assertive ways.

Utilizing 4D Printing to Design Smart Gastroretentive, Esophageal, and Intravesical Drug Delivery Systems

The breakthrough of 3D printing in biomedical research has paved the way for the next evolutionary step referred to as four dimensional (4D) printing. This new concept utilizes the time as the fourth dimension in addition to the x, y, and z axes with the idea to change the configuration of a printed construct with time usually in response to an external stimulus. This can be attained through the incorporation of smart materials or through a preset smart design. The 4D printed constructs may be designed to exhibit expandability, flexibility, self-folding, self-repair or deformability. This review focuses on 4D printed devices for gastroretentive, esophageal, and intravesical delivery. The currently unmet needs and challenges for these application sites are tried to be defined and reported on published solution concepts involving 4D printing. In addition, other promising application sites that may similarly benefit from 4D printing approaches such as tracheal and intrauterine drug delivery are proposed.

Formulation of metoclopramide HCl gastroretentive film and in vitro- in silico prediction using Gastroplus® PBPK software

The new trends in pharmaceutical studies focus on targeting drug delivery and computer software that help in the body environment simulation, such as Gastroplus® software. The interest of this study is to prepare a gastroretentive film of metoclopramide HCl (MTC) that was followed by applying the in silico approach to estimate the in vivo prepared formulations. The films were prepared from HPMC E5 and sodium alginate polymers as primary polymers with the aid of secondary polymers. The sodium alginate high proportions films showed instant and long floating duration reaching 24 h but with variable folding endurance. Moreover, sodium alginate films with their secondary polymers carbopol and HPMC E5 slowed the release of MTC. The floating and slow-release patterns assessed the gastroretentive properties of sodium alginate films and were further examined by a mucoadhesive study that guaranteed mucosal adhesion, and the film's FESEM images showed similar top morphology, but different side view structures. Last, the pharmacokinetic profile of selected films that approached the gastroretentive properties was in silico predicted depending on in vitro release study and floating duration employing the physiological-based pharmacokinetic model in Gastroplus® software. The model determines this prediction found successfully of intravenous and immediate oral release tablets (10 and 30 mg) of MTC. The simulation showed a high amount of MTC retained for long periods in the stomach to Sod.Alginate-3, Sod.Alginate-8, and Sod.Alginate-10 films (films of secondary polymers carbopol and HPMC E5) aid in reaching the optimum site of absorption jejunum 1 due to the slow MTC release.

Influence of Prunus domestica gum on the release profiles of propranolol HCl floating tablets

Propranolol hydrochloride is a beta-blocker used for the management and treatment of hypertension, angina, coronary artery disease, heart failure, fibrillation, tremors, migraine etc. The objective of the present study was to design Propranolol Hydrochloride floating tablets by direct compression method and to explore the role of a new gum as a matrix former. A 2² full factorial design was selected for the present study. Prunus domestica gum and HPMC (K4M) were used as independent variables, swelling index and drug dissolution at 12 hours as dependent variables. Formulations were subjected to pre- and post-compression tests that showed good micromeritics and buoyancy characteristics (Carr’s index 11.76%–14.00%, Hausner’s ratio 1.13°–1.16°, angle of repose 22.67°–25.21°, floating lag time 56–76 seconds, total floating time 18–25 hours and swelling index 59.87%–139.66%). The cumulative drug release in 0.1 N HCl at 12 hours was 72%–90% (p<0.05). Weibull model was found to be the best fit model (R²>0.99) among all other studied models. Multiple regression showed a significant effect of Prunus domestica gum and HPMC K4M on the swelling index and dissolution profiles of propranolol HCl (p<0.05). On the basis of better in-vitro performance and cost-effectiveness, formulation F4 was the best formulation. It is evident from the results that Prunus domestica gum possesses excellent drug release retardant potential for the floating drug delivery system and this new gum should be further explored alone or with other natural and synthetic polymers in future studies.

Research on Technology of Medicinal Functional Food

Particle coating is one of the oldest pharmaceutical processes that is still in existence. It is the process of applying a thin polymer-based film to a particle or granule containing the active pharmaceutical ingredient. The widely used methods for particle coating are sugar coating, film coating, and enteric coating and the techniques are pan coating, fluidized bed coating, and compression coating. Sugar coating was the earlier coating method, and it was gradually replaced by film coating because it required skilled manipulation. With the technology developing, enteric coating draws more attention. Pan coating is the most classic coating technique, which is applied to sugar coating, film coating and enteric coating. Fluid bed coating is used for a mixture of multiple materials and medicines and keeps the bioavailability high. Compression coating can avoid the harmful effects of moisture and high temperature, while it requires highly accurate machinery.

FDM 3D-Printed Sustained-Release Gastric-Floating Verapamil Hydrochloride Formulations with Cylinder, Capsule and Hemisphere Shapes, and Low Infill Percentage

The aim of this work was to design and fabricate fused deposition modeling (FDM) 3D-printed sustained-release gastric-floating formulations with different shapes (cylinder, capsule and hemisphere) and infill percentages (0% and 15%), and to investigate the influence of shape and infill percentage on the properties of the printed formulations. Drug-loaded filaments containing HPMC, Soluplus^® and verapamil hydrochloride were prepared via hot-melt extrusion (HME) and then used to print the following gastric-floating formulations: cylinder-15, capsule-0, capsule-15, hemisphere-0 and hemisphere-15. The morphology of the filaments and the printed formulations were observed by scanning electron microscopy (SEM). The physical state of the drugs in the filaments and the printed formulations were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The printed formulations were evaluated in vitro, including the weight variation, hardness, floating time, drug content and drug release. The results showed that the drug-loaded filament prepared was successful in printing the gastric floating formulations. Verapamil hydrochloride was proved thermally stable during HME and FDM, and in an amorphous state in the filament and the printed formulations. The shape and infill percentage of the printed formulations effected the hardness, floating time and in vitro drug release.

Alginate: From Food Industry to Biomedical Applications and Management of Metabolic Disorders

Initially used extensively as an additive and ingredient in the food industry, alginate has become an important compound for a wide range of industries and applications, such as the medical, pharmaceutical and cosmetics sectors. In the food industry, alginate has been used to coat fruits and vegetables, as a microbial and viral protection product, and as a gelling, thickening, stabilizing or emulsifying agent. Its biocompatibility, biodegradability, nontoxicity and the possibility of it being used in quantum satis doses prompted scientists to explore new properties for alginate usage. Thus, the use of alginate has been expanded so as to be directed towards the pharmaceutical and biomedical industries, where studies have shown that it can be used successfully as biomaterial for wound, hydrogel, and aerogel dressings, among others. Furthermore, the ability to encapsulate natural substances has led to the possibility of using alginate as a drug coating and drug delivery agent, including the encapsulation of probiotics. This is important considering the fact that, until recently, encapsulation and coating agents used in the pharmaceutical industry were limited to the use of lactose, a potentially allergenic agent or gelatin. Obtained at a relatively low cost from marine brown algae, this hydrocolloid can also be used as a potential tool in the management of diabetes, not only as an insulin delivery agent but also due to its ability to improve insulin resistance, attenuate chronic inflammation and decrease oxidative stress. In addition, alginate has been recognized as a potential weight loss treatment, as alginate supplementation has been used as an adjunct treatment to energy restriction, to enhance satiety and improve weight loss in obese individuals. Thus, alginate holds the promise of an effective product used in the food industry as well as in the management of metabolic disorders such as diabetes and obesity. This review highlights recent research advances on the characteristics of alginate and brings to the forefront the beneficial aspects of using alginate, from the food industry to the biomedical field.

Hydrophilic Poly(urethanes) Are an Effective Tool for Gastric Retention Independent of Drug Release Rate

Acyclovir is a poorly permeable, short half-life drug with poor colonic absorption, and current conventional controlled release formulations are unable to decrease the frequency of administration. We designed acyclovir dosage forms to be administered less frequently by being retained in the stomach and releasing drug over an extended duration. We developed a conventional modified-release matrix tablet to sustain the release of acyclovir and surrounded it with a hydrophilic poly(urethane) layer. When hydrated, the porous poly(urethane) swells to a size near or beyond that of the relaxed pylorus diameter and does not affect drug release rate. We demonstrated that the formulation is retained in the stomach for extended durations as it slowly releases drug, allowing for similar area under the curve but delayed t_max relative to a nongastroretentive control tablet. Unlike many other gastroretentive formulations, this dosage form design decouples drug release rate from gastric retention time, allowing them to be modulated independently. It also effectively retains in the stomach regardless of the prandial state, differentiating from other approaches. Our direct observation of excised rat stomachs allowed for a rigorous assessment of the impact of polymer swelling extent and the prandial state on both the dosage form integrity and retention time.

Probing the effect of various lipids and polymer blends on clopidogrel encapsulated floating microcarriers

BACKGROUND

Clopidogrel (CLOP) is an antiplatelet drug with poor solubility in intestinal fluid, which limits its bioavailability after oral administration.

OBJECTIVES

Current study focuses on developing site-specific floating microcarriers of CLOP using solvent diffusion evaporation method (SDEM) for retaining the drug in the stomach, thus improving the solubility of drug for better absorption.

METHODS

SDEM was employed to formulate floating microcarriers using lipidic excipients, namely Gelucires (GL) to impart floating properties, in combination with ethyl cellulose as release retarding polymer.

RESULTS

Prepared particles were 169 ± 6 μm to 375 ± 13 μm in size, whilst encapsulation efficiency was ranged from 39.6 ± 0.60% to 96.50 ± 3.50%. Electron micrographs depicted discrete spherical microcarriers with porous structure, which amplified with increasing HLB value of GL and concentration of Eudragit E100. FTIR study confirmed absence of major drug polymer interactions while DSC and XRD studies revealed the presence of non-crystalline nature of drug in all formulations. Drug release at pH 1.2 enhanced more than 2-folds with increasing HLB value with 32% cumulative drug release for GL 43/01 and 69% for GL 50/13. More interestingly, adding various proportions of Eudragit E100 to GL 43/01 based formulations resulted in increased drug release as high as 71%. In all formulations, the drug release followed diffusion dependent process.

CONCLUSION

It is envisaged that this formulation strategy for CLOP is promising and could possibly be tested in future for its in vivo performance. Graphical abstract Lipid based floating microcarriers of clopidogrel.

Preparation and In vitro Evaluation of FDM 3D-Printed Ellipsoid-Shaped Gastric Floating Tablets with Low Infill Percentages

The aim of the study is to investigate the feasibility of fabricating FDM 3D-printed gastric floating tablets with low infill percentages and the effect of infill percentage on the properties of gastric floating tablets in vitro. Propranolol hydrochloride was selected as a model drug, and drug-loaded polyvinyl alcohol (PVA) filaments were produced by hot melt extrusion (HME). Ellipsoid-shaped gastric floating tablets with low infill percentage of 15% and 25% (namely E-15 and E-25) were then prepared respectively by feeding the extruded filaments to FDM 3D printer. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) were employed to characterize the filaments and 3D-printed tablets, and a series of evaluations were performed to the 3D-printed tablets, including the weight variation, drug content, hardness, in vitro floating behavior, and drug release of the tablets. The SEM results showed that the drug-loaded filaments and 3D-printed tablets appeared intact without defects, and the printed tablets were composed of filaments deposited uniformly layer by layer. The model drug and the excipients were thermally stable under the process temperature of extruding and printing, with a small amount of drug crystals dispersing in the drug-loaded filaments and 3D-printed tablets. Both E-15 and E-25 could float on artificial gastric fluids without any lag time and released in a sustained manner. Compared with E-15, the E-25 presented less weight variation, higher tablet hardness, shorter floating time, and longer drug release time.

Bilayer Tablet Dissolution Kinetics Based on a Degassing Cyclic Flow UV-Vis Spectroscopy with Chemometrics

Dissolution kinetics of a bilayer direct compress tablet was evaluated by using degassing cyclic flow UV-visible (Vis) spectroscopy with chemometrics. The model bilayer nicotinamide (NA)-pyridoxine hydrochloride (PH) 100.0 mg tablets were prepared via the dual compress method. The fast diffusion layer of the bilayer tablet contained nicotinamide, microcrystal cellulose, beta-lactose, magnesium stearate, and croscarmellose sodium. The slow release layer contained pyridoxine hydrochloride and carnauba wax. The monolayer direct compress tablets were prepared as dual ingredient (API)s formulation tablets. The degassing cyclic flow UV-Vis spectroscopy dissolution test was carried out using the prepared tablets. The dissolution test conditions were as follows: time, 60 min; temperature, 37°C; paddle method, 50 rpm, and UV-Vis spectra measurement 1 time/min. The UV-Vis spectra of the flow solution were measured in the range of 240-380 nm. API concentration was predicted by partial least squares (PLS) regression models based on UV-Vis spectra. The dissolution kinetics of the bilayer and monolayer tablets were evaluated based on the UV-Vis spectra with the predicted API concentration profile. The degassing flow system could prevent air bubbles in the flow cell at 1800 min. Therefore, simultaneous determination of NA and PH concentration based on the PLS regression was suggested to have high accuracy. PLS regression has advantages over the conventional λ_max absorbance method of simultaneous determination. We found that the kinetics of the separated bilayer tablet can be evaluated by the same kinetic analysis method used for the single layer model tablet.

Design of Magnetic Polymeric Particles as a Stimulus-Responsive System for Gastric Antimicrobial Therapy

The treatment of peptic ulcers induced by H. pylori remains challenging due to the deep mucous layer location of bacteria preventing antimicrobial drug access. The present work aimed to design and evaluate in vitro dual responsive (both pH and magnetic field-sensitive) polymeric magnetic particles loaded with amoxicillin as a smart drug carrier for deep mucous layer penetration and in situ drug release. Magnetite particles were produced by the co-precipitation method and subsequently coated with the Eudragit^®S100 and amoxicillin by using the spray-drying technique. The physicochemical characterization of the obtained particles was carried out by optical and scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms, and vibrating sample magnetometry. Additionally, drug release tests and antibacterial activity tests were evaluated in vitro. Microparticles presented 17.2 ± 0.4 μm in size and their final composition was 4.3 ± 1.5% of amoxicillin, 87.0 ± 2.3% of Eudragit, and 9.0 ± 0.3% of magnetite. They were both pH and magnetic field responsive while presenting antimicrobial activity. On one side, magnetic field responsiveness of particles is expected to prompt them to reach bacterium niche in deep mucous layer by means of magnetic forces. On the other side, pH responsiveness is expected to enable drug release in the neutral pH of the deep mucous layer, preventing undesired delivery in the acidic gastric lumen. Smart microparticles were designed presenting both pH and magnetic field responsiveness as well as antimicrobial activity. These may be promising assets for peptic ulcer treatment.

Formulation and in vitro, in vivo evaluation of effervescent floating sustained-release imatinib mesylate tablet

Introduction

Imatinib mesylate is an antineoplastic agent which has high absorption in the upper part of the gastrointestinal tract (GIT). Conventional imatinib mesylate (Gleevec) tablets produce rapid and relatively high peak blood levels and requires frequent administration to keep the plasma drug level at an effective range. This might cause side effects, reduced effectiveness and poor therapeutic management. Therefore, floating sustained-release Imatinib tablets were developed to allow the tablets to be released in the upper part of the GIT and overcome the inadequacy of conventional tablets.

Methodology

Floating sustained-release Imatinib mesylate tablets were prepared using the wet granulation method. Tablets were formulated using Hydroxypropyl Methylcellulose (HPMC K4M), with Sodium alginate (SA) and Carbomer 934P (CP) as release-retarding polymers, sodium bicarbonate (NaHCO₃) as the effervescent agent and lactose as a filler. Floating behavior, in vitro drug release, and swelling index studies were conducted. Initial and total drug release duration was compared with a commercial tablet (Gleevec) in 0.1 N HCl (pH 1.2) at 37 ± 0.5°C for 24 hours. Tablets were then evaluated for various physical parameters, including weight variation, thickness, hardness, friability, and drug content. Consequently, 6 months of physical stability studies and in vitro gastro-retentive studies were conducted.

Results and Discussion

Statistical data analysis revealed that tablets containing a composition of 14.67% w/w HPMC K4M, 10.67%, w/w Na alginate, 1.33%, w/w Carbomer 934P and 9.33%, w/w NaHCO₃ produced the most favorable formulation to develop 24-hour sustained-release tablets with optimum floating behavior and satisfactory physicochemical characteristics. Furthermore, in vitro release study revealed that the formulated SR tablet had significantly lower C_max and higher T_max compared to the conventional tablet (Gleevec). Thus, formulated SR tablets preserved persistent concentration of plasma up to 24 hours.

Conclusion

In conclusion, in order to suggest a better drug delivery system with constant favorable release, resulting in optimized absorption and less side effects, formulated CP-HPMC-SA based imatinib mesylate floating sustained-release tablets can be a promising candidate for cancer chemotherapy.

Design and evaluation of polyox and pluronic controlled gastroretentive delivery of troxipide

Objective. Objective of the present work was to develop site-specific gastroretentive drug delivery of Troxipide using polymers Pluronic F127 and Polyox 205 WSR. Troxipide is a novel gastroprotective agent with antiulcer, anti-inflammatory, and mucus secreting properties with elimination half-life of 7.4 hrs. Troxipide inhibits H. pylori-derived urease. It is mainly absorbed from stomach. Methods. 3² factorial design was applied to study the effect of independent variable. Effects of concentration of polymer on dependant variables as swelling index, hardness, and % drug release were studied. Pluronic F127 and Polyox 205 WSR were used as rate controlled polymer. Sodium bicarbonate and citric acid were used as effervescent-generating agent. Results. From the factorial batches, it was observed that formulation F5 (19% Pluronic F127 and 80% Polyox 205 WSR) showed optimum controlled drug release (98.60% ± 1.82) for 10 hrs with ability to float >12 hrs. Optimized formulation characterized by FTIR and DSC studies confirmed no chemical interactions between drug and polymer. Gastroretention for 6 hrs for optimized formulations was confirmed by in vivo X-ray placebo study. Conclusion. Results demonstrated feasibility of Troxipide in the development of gastroretentive site-specific drug delivery.

Design and evaluation of gastroretentive levofloxacin floating mini-tablets-in-capsule system for eradication of Helicobacter pylori

Gastroretentive levofloxacin (LVF) floating mini-tablets for the eradication of Helicobacter pylori (H. pylori) were prepared using the matrix forming polymer hydroxypropyl methylcellulose (HPMC K100M), alone or with Carbopol 940P in different ratios by wet granulation technique. Buoyancy of mini-tablets was achieved by an addition of an effervescent mixture consisting of sodium bicarbonate and anhydrous citric acid to some formulations. The prepared mini-tablets were evaluated for weight variation, thickness, friability, hardness, drug content, in vitro buoyancy, water uptake and in vitro release. The optimized formula was subjected to further studies: FT-IR, DSC analysis and in vivo examination in healthy volunteers. The prepared mini-tablets exhibited satisfactory physicochemical characteristics. Incorporation of gas-generating agent improved the floating parameters. HPMC K100M mini-tablet formulation (F1) offered the best controlled drug release (>8 h) along with floating lag time <1 s and total floating time >24 h. The obtained DSC thermograms and FT-IR charts indicated that there is no positive evidence for the interaction between LVF and ingredients of the optimized formula. The in vivo test confirmed the success of the optimized formula F1 in being retained in the stomach of the volunteers for more than 4 h. LVF floating mini-tablets based on HPMC K100M is a promising formulation for eradication of H. pylori.

Application of design of experiment for polyox and xanthan gum coated floating pulsatile delivery of sumatriptan succinate in migraine treatment

Migraine follows circadian rhythm in which headache is more painful at the awakening time. This needs administration of dosage form at night time to release drug after lag period when pain gets worse. Sumatriptan succinate is a drug of choice for migraine. Sumatriptan succinate has bitter taste, low oral bioavailability, and shorter half-life. Present work deals with application of design of experiment for polyox and xanthan gum in development of press coated floating pulsatile tablet. Floating pulsatile concept was applied to increase gastric residence of the dosage form. Burst release was achieved through immediate release tablet using crospovidone as superdisintegrant (10%). Pulse lag time was achieved using swellable polymer polyox WSR 205 and xanthan gum. 3² experimental design was applied. Optimized formulation was evaluated for physical characteristics and in-vitro and in-vivo study. From results, it can be concluded that optimized batch F8 containing polyox WSR205 (72.72%) and xanthan gum (27.27%) of total weight of polymer has shown floating lag time of 55 ± 2 sec, drug content of 100.35 ± 0.4%, hardness of 6 ± 0.1 Kg/cm², and 98.69 ± 2% drug release in pulse manner with lag time of 7 ± 0.1 h. Optimized batch showed prolong gastric residence which was confirmed by in-vivo X-ray study.

Development of press-coated, floating-pulsatile drug delivery of lisinopril

Lisinopril is an angiotensin-converting enzyme (ACE) inhibitor, primarily used for the treatment of hypertension, congestive heart failure, and heart attack. It belongs to BCS class III having a half-life of 12 hrs and 25% bioavailability. The purpose of the present work was to develop a press-coated, floating-pulsatile drug delivery system. The core tablet was formulated using the super-disintegrants crosprovidone and croscarmellose sodium. A press-coated tablet (barrier layer) contained the polymer carrageenan, xanthan gum, HPMC K4M, and HPMC K15M. The buoyant layer was optimized with HPMC K100M, sodium bicarbonate, and citric acid. The tablets were evaluated for physical characteristics, floating lag time, swelling index, FTIR, DSC, and in vitro and in vivo behavior. The 5% superdisintgrant showed good results. The FTIR and DSC study predicted no chemical interactions between the drug and excipients. The formulation containing xanthan gum showed drug retaining abilities, but failed to float. The tablet containing HPMC K15M showed a high swelling index. The lag time for the tablet coated with 200 mg carrageenan was 3±0.1 hrs with 99.99±1.5% drug release; with 140 mg HPMC K4M, the lag time was 3±0.1 hrs with 99.71±1.2% drug release; and with 120 mg HPMC K15M, the lag time was 3±0.2 hrs with 99.98±1.7% drug release. The release mechanism of the tablet followed the Korsmeyer-Peppas equation and a first-order release pattern. Floating and lag time behavior have shown good in vitro and in vivo correlations.

Utility of gastric-retained alginate gels to modulate pharmacokinetic profiles in rats

A gastric-retentive formulation amenable to dosing in rodents has the potential to enable sustained release in a preclinical setting. This may be useful to provide systemic exposure over a longer duration or to increase duration of exposure for compounds with targets localized in the gastrointestinal tract. Previous work has shown that a mixture of 1% sodium alginate and 0.625% karaya gum in the presence of a calcium chelator can form gels in situ that are gastric retained in rats. The aim of this work was to define the physicochemical boundaries of compounds within this technology and their relation to in vivo release using a series of model compounds with high permeability but varying solubility. In vitro data demonstrated a good correlation between solubility and initial release rates from the gels. In vivo studies were conducted in Sprague-Dawley rats to compare the exposure profile of compounds dosed in gel relative to a standard formulation. In vivo data were consistent with trends from the in vitro studies. These data suggest that, in conjunction with an understanding of compound solubility, sodium alginate/karaya gum gels may be a useful tool to modulate exposure profiles in rodent models in a preclinical setting.

Chitosan-alginate microcapsules of amoxicillin for gastric stability and mucoadhesion

Amoxicillin-loaded microcapsules were prepared by ionotropic gelation of sodium alginate (ALG) with chitosan (CS) in presence of calcium chloride as gastroretentive delivery system. The effect of pH, concentration of ALG, CS and calcium chloride, and drug : ALG ratio were optimized in this study for minimizing the degradation of drug in acidic environment and increasing the loading efficacy and mucoadhesive efficiency of microcapsules. The optimum condition for prepared CS-ALG microcapsules was 2%w/v ALG, 0.75%w/v CS (pH5.0), and 1.0% w/v calcium chloride. The resulting microcapsules had drug entrapment efficiency of 84% and average size of 840 mm. CS concentration significantly influenced particle size and encapsulation efficiency of CS–ALG microcapsules (P<0.05). Decrease in the drug: ALG ratio resulted in an increased release of amoxicillin in acidic media. The relative decomposition of drug after encapsulation in CS-ALG microcapsules was decreased to 20.7%, 41.9%, and 83.3% in 2, 4, and 8 hours, respectively.

Solubility enhancement, physicochemical characterization and formulation of fast-dissolving tablet of nifedipine-betacyclodextrin complexes

The main objective of the study was to enhance the dissolution of nifedipine, a poorly water soluble drug by betacyclodextrin complexation and to study the effect of the preparation method on the in vitro dissolution profile. The stoichiometric ratio determined by phase solubility analysis for inclusion complexation of nifedipine with β-cyclodextrin was 1:1. Binary complex was prepared by different methods and was further characterized using XRD, DSC and FT-IR. A saturation solubility study was carried out to evaluate the increase in solubility of nifedipine. The optimized complex was formulated into fast-dissolving tablets by using the superdisintegrants Doshion P544, pregelatinized starch, crospovidone, sodium starch glycolate and croscarmellose sodium by direct compression. Tablets were evaluated for friability, hardness, weight variation, disintegration and in vitro dissolution. Tablets showed an enhanced dissolution rate compared to pure nifedipine.

Development of controlled-release matrix tablet of risperidone: influence of Methocel®- and Ethocel®-based novel polymeric blend on in vitro drug release and bioavailability

Controlled-release (CR) matrix tablet of 4 mg risperidone was developed using flow bound dry granulation-slugging method to improve its safety profile and compliance. Model formulations F1, F2, and F3, consisting of distinct blends of Methocel® K100 LV-CR and Ethocel® standard 7FP premium, were slugged. Each batch of granules (250-1,000 μm), obtained by crushing the slugs, was divided into three portions after lubrication and then compressed to 9-, 12-, and 15-kg hard tablets. In vitro drug release studies were carried out in 0.1 N HCl (pH 1.2) and phosphate buffer (pH 6.8) using a paddle dissolution apparatus run at 50 rpm. The CR test tablet, containing 30% Methocel® and 60% Ethocel® (F3) with 12-kg hardness, exhibited pH-independent zero-order release kinetics for 24 h. The drug release rate was inversely proportional to the content of Ethocel®, while the gel layer formed of Methocel® helped in maintaining the integrity of the matrix. Changes in the hardness of tablet did not affect the release kinetics. The tablets were reproducible and stable for 6 months at 40 ± 2°C/75 ± 5% relative humidity. Risperidone and its active metabolite, 9-hydroxyrisperidone, present in the pooled rabbit's serum, were analyzed with HPLC-UV at λ(max) 280 nm. The CR test tablet exhibited bioequivalence to reference conventional tablet in addition to the significantly (p < 0.05) optimized peak concentration, C(max), and extended peak time, T (max), of the active moiety. There was a good association between drug absorption in vivo and drug release in vitro (R(2) = 0.7293). The successfully developed CR test tablet may be used for better therapeutic outcomes of risperidone.