Amphotericin B Loaded Chitosan Nanoparticles: Implication of Bile Salt Stabilization on Gastrointestinal Stability, Permeability and Oral Bioavailability

Bile salt-enriched vs. non-enriched nanoparticles: comparison of their physicochemical characteristics and release pattern

Bile salts were first used in the preparation of nanoparticles due to their stabilizing effects. As time went by, they attracted much attention and were increasingly employed in fabricating nanoparticles. It is well accepted that the physicochemical properties of nanoparticles are influential factors in their permeation, distribution, elimination and degree of effectiveness as well as toxicity. The review of articles shows that the use of bile salts in the structure of nanocarriers may cause significant changes in their physicochemical properties. Hence, having information about the effect of bile salts on the properties of nanoparticles could be valuable in the design of optimal carriers. Herein, we review studies in which bile salts were used in preparing liposomes, niosomes and other nanocarriers. Furthermore, the effects of bile salts on entrapment efficiency, particle size, polydispersity index, zeta potential, release profile and stability of nanoparticles are pointed out. Finally, we debate how to take advantage of bile salts potential for preparing desirable nanocarriers.

Biomaterials with antifungal strategies to fight oral infections

Oral fungal infections pose a threat to human health and increase the economic burden of oral diseases by prolonging and complicating treatment. A cost-effective strategy is to try to prevent these infections from happening in the first place. With this purpose, biomaterials with antifungal properties are a crucial element to overcome fungal infections in the oral cavity. In this review, we go through different kinds of biomaterials and coatings that can be used to functionalize them. We also review their potential as a therapeutic approach in addition to prophylaxis, by going through traditional and alternative antifungal compounds, e.g., essential oils, that could be incorporated in them, to enhance their efficacy against fungal pathogens. We aim to highlight the potential of these technologies and propose questions that need to be addressed in prospective research. Finally, we intend to concatenate the key aspects and technologies on the use of biomaterials in oral health, to create an easy to find summary of the current state-of-the-art for researchers in the field.

Promising strategies for improving oral bioavailability of poor water-soluble drugs

INTRODUCTION

Oral administration of poorly water-soluble drugs (PWSDs) is generally related to low bioavailability, leading to high drug doses, multiple side effects, and low patient compliance. Thus, different strategies have been developed to increase drug solubility and dissolution in the gastrointestinal tract, opening new venues for these drugs.

AREAS COVERED

This review outlines the current challenges in PWSD formulation development and the strategies to overcome the oral barriers and increase their solubility and bioavailability. Conventional strategies include altering crystalline and molecular structures and modifying oral solid dosage forms. In contrast, novel strategies comprise micro- and nanostructured systems. Recent representative studies involving how these strategies have improved the oral bioavailability of PWSDs were also reviewed and reported.

EXPERT OPINION

New approaches to enhance PWSD bioavailability have sought to improve water solubility and dissolution rates, drug protection by overcoming biological barriers, and increased absorption. Still, only a handful of studies have focused on quantifying the increase in bioavailability. Improving the oral bioavailability of PWSDs remains an exciting unexplored field of research and has become an important issue for successfully developing pharmaceutical products.

Investigation on Potential of Chitosan Nanoparticles for Oral Bioavailability Enhancement of Risedronate Sodium

Risedronate sodium (RS) is used in osteoporosis for bone reabsorption. It is a BCS class III drug having poor oral bioavailability (<0.63%) due to low permeability. In the present study, RS-loaded chitosan nanoparticles were developed to increase oral bioavailability and evaluated for various parameters. The DSC study indicated compatibility of RS with excipients in their physical mixture. The nanoparticles were prepared by ionotropic gelation technique and lyophilized. The optimized batch (RS-CNs) was found to have particles of size 268.7 nm and zeta potential of 24.9 mV. The TEM image of RS-CNs revealed discrete spherical particles. Angle of repose of 27.02 indicates good flow property of nanoparticles. FT-IR spectra of RS-CNs showed characteristic peaks of RS indicating compatibility of RS with the excipients. The mucin binding efficiency of RS-CNs was obtained as 63.42%. The in vitro release study of RS indicated controlled delivery from RS-CNs over 22 h. The release mechanism was found to be diffusion- and erosion-controlled release. Ex vivo study using rat intestine revealed faster permeation of 32.78% in 6 h from RS-CNs compared to plain drug solution. In vivo pharmacokinetic study in rats showed increased C_max (1.8 fold) from RS-CNs compared to marketed formulation. The relative bioavailability of 193% from RS-CNs indicated significant enhancement in bioavailability upon nanoparticle formulation. The RS-CNs were found to be stable at room and refrigerated conditions. In conclusion, developed RS-loaded chitosan nanoparticles seem to be a promising approach to increase oral bioavailability and can avoid upper GI tract side effects.

Nanoparticles as a Tool for Broadening Antifungal Activities

Fungal infections are diseases that are considered neglected although their infection rates have increased worldwide in the last decades. Thus, since the antifungal arsenal is restricted and many strains have shown resistance, new therapeutic alternatives are necessary. Nanoparticles are considered important alternatives to promote drug delivery. In this sense, the objective of the present study was to evaluate the contributions of newly developed nanoparticles to the treatment of fungal infections. Studies have shown that nanoparticles generally improve the biopharmaceutical and pharmacokinetic characteristics of antifungals, which is reflected in a greater pharmacodynamic potential and lower toxicity, as well as the possibility of prolonged action. It also offers the proposition of new routes of administration. Nanotechnology is known to contribute to a new drug delivery system, not only for the control of infectious diseases but for various other diseases as well. In recent years, several studies have emphasized its application in infectious diseases, presenting better alternatives for the treatment of fungal infections.

Recuperating Biopharmaceutical Aspects of Amphotericin B and Paromomycin Using a Chitosan Functionalized Nanocarrier via Oral Route for Enhanced Anti-leishmanial Activity

The design and development of new pharmaceutical formulations for the existing anti-leishmanial is a new strategic alternate to improve efficacy and safety rather than new drug discovery. Herein hybrid solid lipid nanoparticles (SLN) have been engineered to direct the oral delivery of two anti-leishmanial drugs amphotericin B (AmB) and paromomycin (PM). The combinatorial nanocarriers consist of conventional SLN, antileishmanial drugs (AmB and PM) which have been functionalized with chitosan (Cs) grafted onto the external surface. The Cs-SLN have the mean particle size of 373.9 ± 1.41 nm, polydispersity index (PDI) of 0.342 ± 0.02 and the entrapment efficiency for AmB and PM was found to be 95.20 ± 3.19% and 89.45 ± 6.86 %, respectively. Characterization of SLN was performed by scanning electron microscopy and transmission electron microscopy. Complete internalization of the formulation was observed in Caco-2 cells. Cs-SLN has shown a controlled and slow drug release profile over a period of 72 h and was stable at gastrointestinal fluids, confirmed by simulated gastro-intestinal fluids study. Cs coating enhanced the mucoadhesive property of Cs-SLN. The in-vitro anti-leishmanial activity of Cs-SLN (1 μg/ml) has shown a maximum percentage of inhibition (92.35%) on intra-cellular amastigote growth of L. donovani.

Development of Morin-Loaded Nanoemulsions Containing Various Polymers; Role of Polymers in Formulation Properties and Bioavailability

Emulsions for oral delivery are not suitable for sustained drug absorption because such preparations diffuse rapidly in the gastrointestinal (GI) tract after oral administration. In order to generate sustained drug absorption and increase oral bioavailability, various polymers were added to a morin (MO) nanoemulsion to improve retention in the GI tract and alter the surface properties of oil droplets in the nanoemulsion. The influence of these polymers on the formulation properties was investigated. The area under the blood concentration-time curve (AUC) and the mean residence time (MRT) after oral administration of the nanoemulsions were measured, and the influence of the polymers on bioavailability was investigated. Chitosan (Chi) addition MO nanoemulsion (MO-Chi nanoemulsion) showed the highest AUC and MRT. MO-Chi nanoemulsion increased retention in the GI tract because of the relatively higher viscosity and high affinity between mucin and Chi covering the oil droplets. Furthermore, MO-Chi nanoemulsion could maintain the drug in oil droplets by suppression of drug release through the polymer hydration layer, and sustained drug release achieved continuous drug absorption. Nanoemulsions with sodium carboxymethylcellulose and poly-γ-glutamic acid potassium salt showed the next highest AUC and MRT after MO-Chi nanoemulsion. From these results, it was suggested that by increasing the viscosity of the nanoemulsion, there was high affinity between the added polymer and mucin, and sustained drug release was useful for enhancing the bioavailability of the polymer-containing nanoemulsions.

Lipopolysaccharide Polyelectrolyte Complex for Oral Delivery of an Anti-tubercular Drug

Anti-tuberculosis drug delivery has remained a challenge due to inconsistent bioavailability and inadequate sustained-release properties leading to treatment failure. To resolve these drawbacks, a lipopolysaccharide polyelectrolyte complex (PEC) encapsulated with rifampicin (RIF) (as the model drug) was fabricated, using the solvent injection technique (SIT), with soy lecithin (SLCT), and low-molecular-weight chitosan (LWCT). The average particle size and surface charge of RIF-loaded PEC particulates was 151.6 nm and + 33.0 nm, respectively, with noted decreased particle size and surface charge following increase in SLCT-LWCT mass ratio. Encapsulation efficiency (%EE) and drug-loading capacity (%LC) was 64.25% and 5.84%, respectively. Increase in SLCT-LWCT mass ratio significantly increased %EE with a marginal reduction in %LC. In vitro release studies showed a sustained-release profile for the PEC particulate tablet over 24 h (11.4% cumulative release) where the dominant release mechanism involved non-Fickian anomalous transport shifting towards super case II release as SLCT ratios increased (6.4% cumulative release). PEC-tablets prepared without SIT presented with rapid Fickian-diffusion-based drug release with up to 90% RIF release within 4 h. Ex vivo permeability studies revealed that lipopolysaccharide PEComplexation significantly increased the permeability of RIF by ~ 2-fold within the 8-h study period. These results suggest successful encapsulation of RIF within a PEC structure while imparting increased amorphic regions, as indicated by x-ray diffraction, for potential benefits in improved drug dissolution, bioavailability, and dosing.