Effects of Drug-Polymer Interactions on Tablet Properties During the Development of Abuse-Deterrent Dosage Forms

Effect of Manufacturing Process on the Retention of Abuse-Deterrent Properties of PEO-Matrix Tablets

Polyethylene oxide (PEO) is a widely used polymer in the development of abuse-deterrent oral formulations. Different manufacturing processes including direct compression (DC) followed by sintering, wet granulation (WG) followed by compression and sintering, and hot melt extrusion (HME) can be used to manufacture abuse-deterrent oral drug products. Three different manufacturing processes (DC, WG, HME) were evaluated to test the retention of their abuse-deterrent features following attempts to grind the tablets or extrudates. In vitro drug release studies were conducted on 10% and 32% drug-loaded tablets/extrudates prepared using these manufacturing methods, and the release profiles from all formulations showed good extended-release properties. Drug content analysis on the granules obtained from tablets prepared by direct compression showed non-uniform drug distribution where an unexpectedly high drug content was present in the smallest size (< 250 µm) granules, sizes which are likely to be inhaled by abusers. Granules from tablets prepared by wet granulation showed improved drug distribution across all granule sizes formed after grinding. Drug content testing on the granules obtained from extrudates prepared using hot melt extrusion showed excellent drug content uniformity along with sufficient strength to resist grinding into smaller particles. The retention of the abuse-deterrent properties of a dosage form following attempts to extract or abuse the drug is an important product characteristic, and the product design, formulation components, and manufacturing processes can all play critical roles in the retention of the desired abuse-deterrent properties.

Development and evaluation of pseudoephedrine hydrochloride abuse-deterrent formulations using thermal modified rice starch

There is a continued global effort to prevent the spread of prescription drug abuse. In particular, chemical structure of pseudoephedrine hydrochloride (PSE), an over-the-counter medication, is very similar to that of methamphetamine (MET). The aim of this study was to develop abuse-deterrent formulations (ADF) of PSE by using thermal modified starch (TMR). PSE is a water-soluble drug, but it is intended to inhibit extraction from the extraction medium in excess tablets. Starch-based formulations were successfully developed using cross-linking agent and lipid. The extraction (%) of PSE from TMR7-L5 formulation (equivalent to 5 tablets) were 75.3% in DW, 2.7% in ethyl alcohol, and 63.0% in 40% ethyl alcohol (v/v) at 60 °C for 30 min. Moreover, TMR7-L5 formulation delayed drug release compared to the commercial product in in vitro release. In conclusion, the development of ADFs using a starch-based formulation shows novelty and has potential to prevent drug abuse.

Abuse-deterrent properties and cytotoxicity of poly(ethylene oxide) after thermal tampering

Poly(ethylene oxide) (PEO) is the most common deterring agent used in the abuse-deterrent formulations (ADFs). In this study, we investigated the PEO's abuse-deterrent properties and its potential cytotoxicity after being heated at high temperatures (80 °C and 180 °C). The results indicated a significant loss in both crush and extraction resistance features of the polymer, which is primarily associated with the polymer degradation at the higher temperatures. The heat-treated PEO at the high temperature was also found to lose its controlled-release feature, upon which over 80% of the drug was released after one hour in the simulated gastric fluid. The cytotoxicity of the PEO was further assessed to evaluate the safety of the polymer following the thermal treatment. Our findings revealed a substantial loss in the viability of the cells exposed to the PEO treated at higher temperatures. Taken all, heating PEO at high temperatures can lead to a significant loss in both the crush/extraction resistance characteristics and the safety of the polymer. These findings reemphasize the fact that more appropriate and stricter test and regulations will be needed to assure that the abuse deterrent formulations are safe and effective under severe conditions of abuse.

Evaluation of tableting performance of Poly (ethylene oxide) in abuse-deterrent formulations using compaction simulation studies

Poly (ethylene oxide) (PEO) has been widely used in abuse-deterrent formulations (ADFs) to increase tablet hardness. Previous studies have shown that formulation variables such as processing conditions and particle size of PEO can affect ADF performance in drug extraction efficiency. This work aims to understand the effect of PEO grades and sources on the compaction characteristics of model ADFs. PEOs from Dow Chemical and Sumitomo Chemical with different molecular weights were examined using a Styl'One compaction simulator at slow, medium, and fast tableting speeds. Particle-size distribution, thermal behavior, tabletability, compressibility using the Heckel model, compactibility, and elastic recovery were determined and compared between the neat PEOs and model ADFs. Multivariate linear regression was performed to understand the effect of compression conditions and PEO grades and sources. Our results show that neat PEOs with high molecular weight exhibit high tabletability. The source of neat PEOs contributes to the difference in tabletability, out-die compressibility, compactibility, and elastic recovery. However, the influence of the PEO source on tabletability and compactibility decreases after adding the model drug. In our model ADFs, tablets using PEOs with high molecular weight have high crushing strength, and tablets using PEOs from Dow Chemical display low elastic recovery.

Overdose and Alcohol Sensitive Immediate Release System (OASIS) for Deterring Accidental Overdose or Abuse of Drugs

Death from an accidental or intentional overdose of sleeping tablets has increased exponentially in the USA. Furthermore, the simultaneous consumption of sleeping tablets with alcoholic beverages not only intensifies the effect of sleeping tablets but also leads to blackouts, sleepwalking, and death in many cases. In this article, we proposed a unique and innovative technology to prevent multi-tablet and alcohol-associated abuse of sleeping tablet. Agonist- and antagonist-loaded polymeric filaments of appropriate Eudragit® polymers were prepared using hot melt extrusion. Metoprolol tartrate and hydrochlorothiazide were used as model drugs in place of zolpidem tartrate (agonist-BCS class I) and flumazenil (antagonist-BCS class IV), respectively. Crushed filaments were converted into a tablet with a novel rapidly soluble co-processed alkalizing agent. Dissolution studies of single tablet and multiple tablets (5) in fasted state simulated gastric fluid (FaSSGF) confirmed that the release of the agonist was significantly (p < 0.0001) reduced in multi-tablet dissolution. Furthermore, the release of antagonist was significantly higher when tablet was exposed to FaSSGF+20% ethanol and various alcoholic beverages. Thus, appropriate use of Eudragit® polymer's chemistry could help design a tablet to prevent the release of agonist in case of overdose and simultaneous release of antagonist when consumed with alcohol.

Use of Drug Release Testing to Evaluate the Retention of Abuse-Deterrent Properties of Polyethylene Oxide Matrix Tablets

Abuse-deterrent formulations (ADFs) using physical/chemical barrier approaches limit abuse by providing resistance to dosage form manipulation to limit drug extraction or altered release. Standardizing in vitro testing methods to assess the resistance to manipulation presents a number of challenges, including the variation in particle sizes resulting from the use of various tools to alter the tablet matrix (e.g., grinding, chipping, crushing). A prototype, direct-compression ADF using a sintered polyethylene oxide (PEO) matrix containing dextromethorphan, an enantiomeric form of the opioid, levorphanol, was developed to evaluate testing methodologies for retention of abuse-deterrent properties following dosage form tampering. Sintered PEO tablets were manipulated by grinding, and drug content and release were evaluated for the recovered granules. Drug content analysis revealed that higher amounts of drug were contained in the smaller size granules (< 250 μm, 190% of the theoretical amount) compared with the larger particles (> 250 μm, 55-75% of theoretical amount). Release testing was performed on various size granule fractions (> 850 μm, 500-850 μm, 250-500 μm, and < 250 μm) using USP type I (basket), type II (paddle), and type IV (flow-through) apparatus. The USP type I and type II apparatus gave highly variable release results with poor discrimination among the release rates from different size granules. The observed sticking of the hydrated granules to the baskets and paddles, agglomeration of hydrated granules within the baskets/vessels, and ongoing PEO hydration with subsequent gel formation further altered the particle size and impacted the rate of drug release. The use of a flow-through apparatus (USP type IV) resulted in improved discrimination of drug release from different size granules with less variability due to better dispersion of granules (minimal sticking and aggregation). Drug release profiles from the USP type IV apparatus showed that the larger size granules (> 500 μm) offered continued resistance to drug release following tablet manipulation, but the smaller size granules (< 500 μm) provided rapid drug release that was unhindered by the hydrated granule matrix. Since < 500-μm size particles are preferred for nasal abuse, improved direct-compression ADF formulations should minimize the formation of these smaller-sized particles following tampering to maintain the product's abuse-deterrent features.

Extended release pellets prepared by hot melt extrusion technique for abuse deterrent potential: Category-1 in-vitro evaluation

The objective of the present study was to develop extended-release (ER) hot-melt extruded (HME) abuse-deterrent pellets of acetaminophen, a model drug, by utilizing high molecular weight polyethylene oxide (PEO) and gelling agents (xanthan gum, guar gum, and gellan gum). The HME pellets were evaluated for their abuse-deterrence (AD) potential by Category-1 laboratory in-vitro evaluation parameters, including particle size reduction (PSR), small volume extraction, dissolution, viscosity, syringeability, and injectability. Further, the pellets were investigated for resistance to physical (crushing) and thermal (oven and microwave) manipulation to evaluate the strength of the AD properties. Physical manipulation studies demonstrated that the pellets were intact, extremely hard, and resistant to PSR and manipulation to bypass ER properties. Dissolution of all intact and physically manipulated pellets led to complete drug release within 8 h, and resistance to dose-dumping in 40% ethanol was observed. The drug extraction was <50% in 10 mL of ingestible and non-ingestible solvents under static, agitation, and thermal manipulation conditions with an incubation time of 30 min. The PEO/xanthan gum-based formulation showed higher viscosity, syringe and injection forces, and lower syringeable volume in all manipulation conditions compared with plain PEO pellets. These findings supported the AD potential of PEO and xanthan gum pellets against intravenous abuse.

Development of Abuse-Deterrent Formulations Using Sucrose Acetate Isobutyrate

The objective of the present investigation was to understand the effect of sucrose acetate isobutyrate (SAIB) on abuse-deterrent properties (ADPs) of abuse-deterrent formulations (ADFs) based on Polyox™. SAIB would enhance ADPs of Polyox™-based formulations due to its glassy liquid and hydrophobic properties. Formulations were prepared by granulation followed by compression and heat curing at 90°C. The formulations were evaluated for surface morphology, hardness, manipulation in coffee grinder, particle size distribution, drug (pseudoephedrine hydrochloride) extraction in water, alcohol, 0.1 N HCl, 0.1 N NaOH at room temperature and elevated temperature using microwave and oven, syringeability and injectability, and dissolution. The heat curing of formulations significantly increased the hardness (> 490 N). Addition of SAIB imparted elasticity to formulations and decreased brittleness as indicated by lower values of work done and gradient compared to control formulations. After grinding, about 7.7-25.6% of the powder remained on the sieve (1 mm pore opening), D₉₀ was 53.1-136.7 μm more, and Q (fraction < 500 μm) was 17.8-40.7% less in SAIB-based formulations compared to control formulations. Drug extraction between control and test intact formulations was similar. However, drug extraction was 23.9-42.5% (water), 20.6-26.1% (0.1 N HCl), and 37.4-50.6% (0.1 N NaOH) less in SAIB-based powder cured and uncured formulations compared to control formulations. Dissolution varied from 65.6 ± 4.2 to 97.6 ± 4.0% in 9 h from the formulations. In conclusion, addition of SAIB to Polyox™-based ADFs has synergistic effect on ADPs. This would further decrease potential of drug abuse/misuse by various routes.

Polyethylene Oxide (PEO) Molecular Weight Effects on Abuse-Deterrent Properties of Matrix Tablets

While polyethylene oxide (PEO)-based matrix tablets are frequently used as abuse-deterrent dosage forms, there is limited information available regarding how the selection of formulation components and manufacturing processes affect the resulting abuse-deterrent properties. The objective of the current study was to evaluate the effects of formulation and process variables on the abuse-deterrent features of PEO-containing tablets. Directly compressed tablets were prepared using three different PEO molecular weights (100,000; 900,000; and 5,000,000). As anticipated, sintering/thermal treatment above the melting point of PEO was crucial to impart crush-resistant features (tablet hardness > 500 N). In addition to the sintering temperature, the weight fraction of PEO in the tablets affected their mechanical strength, and at least 50% w/w PEO was required to impart the desired crush-resistant features. In addition, the formulation and process variables also impacted syringeability and injectability of the PEO gels formed when the tablets were hydrated to simulate attempted drug extraction. High molecular weight PEO (900,000 and 5,000,000) produced gels more resistant to syringeability and injectability compared to low molecular weight PEO (100,000). Sintering above the polymer melting point decreased PEO crystallinity after cooling, and longer sintering times resulted in PEO degradation producing lower viscosity gels with reduced resistance to syringeability and injectability. Although sintering above the melting point of PEO imparts optimal mechanical strength to the tablets, prolonged sintering durations negatively impact polymer stability and alter the resulting abuse-deterrent features of the PEO-based tablet formulations.