Cycloaddition-Retro-Electrocyclization Click Reaction of Amine End-Capped Oligoynes with Tetracyanoethylene

This study shows the first example of cycloaddition-retro-electrocyclization (CA-RE) click reaction involving nitrogen end-capped push-pull oligoynes. The reported CA-RE reaction with TCNE (tetracyanoethylene) is fully regioselective and leads exclusively to the unprecedented TCBD (tetracyanobuta-1,3-diene-2,3-diyl) end-capped carbon rods. The molecular structure of the products was unambiguously confirmed using X-ray single crystal diffraction and their optical and electronic properties were investigated experimentally and rationalized using DFT (density functional theory) calculations.

Click Synthesis of Triazole Polymers Based on Lignin-Derived Metabolic Intermediate and Their Strong Adhesive Properties to Cu Plate

2-Pyrone-4,6-dicarboxylic acid (PDC) is a chemically stable metabolic intermediate of lignin that can be produced on a large scale by transforming bacteria. Novel biomass-based polymers based on PDC were synthesized by Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) and fully characterized by nuclear magnetic resonance, infrared spectroscopies, thermal analysis, and tensile lap shear strength measurements. The onset decomposition temperatures of these PDC-based polymers were all above 200 °C. In addition, the PDC-based polymers exhibited strong adhesive properties to various metal plates, with the highest adhesion to a copper plate of 5.73 MPa. Interestingly, this result was in contrast to our previous findings that PDC-based polymers weakly adhere to copper. Furthermore, when bifunctional alkyne and azide monomers were polymerized in situ under hot-press conditions for 1 h, the resulting PDC-based polymer displayed a similar adhesion to a copper plate of 4.18 MPa. The high affinity of the triazole ring to copper ions improved the adhesive ability and selectivity of the PDC-based polymers to copper while still maintaining the strong adhesive ability to other metals, which is conducive to enhancing the versatility of PDC-based polymers as adhesives.

2,3-Diaryl-1,1,4,4-tetracyanobutadienes as colorimetric sensors for hydrogen sulfide ion in aqueous media

Two derivatives of tetracyanobutadienes are synthesized and used as colorimetric ion sensors in aqueous media. The key synthetic step involve a [2+2]-cycloaddition/retro-cycloaddition between electron-rich diaryl ethyne and the electron-deficient tetracyanoethene. The compound bearing two sulfonamide groups shows a good selectivity towards hydrogen sulfide ion with a detection limit of 15.5 μM. The use of this sensor for the quantitative analysis of hydrogen sulfide ion in real water samples is successfully demonstrated.

1,1,4,4-Tetracyanobutadiene-Functionalized Anthracenes: Regioselectivity of Cycloadditions in the Synthesis of Small Near-IR Dyes

Two small 1,1,4,4-tetracyanobutadiene-functionalized chromophores were obtained by careful leverage of the regioselectivity of the cycloaddition reaction of tetracyanoethylene with anthracene-ynamide derivatives, inducing either a [2 + 2] or a [4 + 2] Diels-Alder process. DFT calculations unraveled the mechanism of the [2 + 2] cycloaddition-retroelectrocyclization reaction sequence with ynamides and elucidated the differing mechanisms in the two substrates. The synthesized dyes presented panchromatic absorption extending into the near-IR and far-red/near-IR photoluminescence in the solid state up to 1550 nm.

Conjugated polymers – a versatile platform for various photophysical, electrochemical and biomedical applications: a comprehensive review

Tuneable properties of conjugated polymers are attractive for use in multiple domains like optical, electronic and biological applications.

Conducting Polymers, Hydrogels and Their Composites: Preparation, Properties and Bioapplications

This review is focused on current state-of-the-art research on electroactive-based materials and their synthesis, as well as their physicochemical and biological properties. Special attention is paid to pristine intrinsically conducting polymers (ICPs) and their composites with other organic and inorganic components, well-defined micro- and nanostructures, and enhanced surface areas compared with those of conventionally prepared ICPs. Hydrogels, due to their defined porous structures and being filled with aqueous solution, offer the ability to increase the amount of immobilized chemical, biological or biochemical molecules. When other components are incorporated into ICPs, the materials form composites; in this particular case, they form conductive composites. The design and synthesis of conductive composites result in the inheritance of the advantages of each component and offer new features because of the synergistic effects between the components. The resulting structures of ICPs, conducting polymer hydrogels and their composites, as well as the unusual physicochemical properties, biocompatibility and multi-functionality of these materials, facilitate their bioapplications. The synergistic effects between constituents have made these materials particularly attractive as sensing elements for biological agents, and they also enable the immobilization of bioreceptors such as enzymes, antigen-antibodies, and nucleic acids onto their surfaces for the detection of an array of biological agents. Currently, these materials have unlimited applicability in biomedicine. In this review, we have limited discussion to three areas in which it seems that the use of ICPs and materials, including their different forms, are particularly interesting, namely, biosensors, delivery of drugs and tissue engineering.

1-Iodobuta-1,3-diynes in Copper-Catalyzed Azide-Alkyne Cycloaddition: A One-Step Route to 4-Ethynyl-5-iodo-1,2,3-triazoles

Cu-catalyzed 1,3-dipolar cycloaddition of iododiacetylenes with organic azides using iodotris(triphenylphosphine)copper(I) as a catalyst was found to be an efficient one-step synthetic route to 5-iodo-4-ethynyltriazoles. The reaction is tolerant to various functional groups in both butadiyne and azide moieties. The synthetic application of 5-iodo-4-ethynyl triazoles obtained was also evaluated: the Sonogashira coupling with alkynes resulted in unsymmetrically substituted triazole-fused enediyne systems, while the Suzuki reaction yielded the corresponding 5-aryl-4-ethynyl triazoles.

Self-assembly as a key player for materials nanoarchitectonics

The development of science and technology of advanced materials using nanoscale units can be conducted by a novel concept involving combination of nanotechnology methodology with various research disciplines, especially supramolecular chemistry. The novel concept is called 'nanoarchitectonics' where self-assembly processes are crucial in many cases involving a wide range of component materials. This review of self-assembly processes re-examines recent progress in materials nanoarchitectonics. It is composed of three main sections: (1) the first short section describes typical examples of self-assembly research to outline the matters discussed in this review; (2) the second section summarizes self-assemblies at interfaces from general viewpoints; and (3) the final section is focused on self-assembly processes at interfaces. The examples presented demonstrate the strikingly wide range of possibilities and future potential of self-assembly processes and their important contribution to materials nanoarchitectonics. The research examples described in this review cover variously structured objects including molecular machines, molecular receptors, molecular pliers, molecular rotors, nanoparticles, nanosheets, nanotubes, nanowires, nanoflakes, nanocubes, nanodisks, nanoring, block copolymers, hyperbranched polymers, supramolecular polymers, supramolecular gels, liquid crystals, Langmuir monolayers, Langmuir-Blodgett films, self-assembled monolayers, thin films, layer-by-layer structures, breath figure motif structures, two-dimensional molecular patterns, fullerene crystals, metal-organic frameworks, coordination polymers, coordination capsules, porous carbon spheres, mesoporous materials, polynuclear catalysts, DNA origamis, transmembrane channels, peptide conjugates, and vesicles, as well as functional materials for sensing, surface-enhanced Raman spectroscopy, photovoltaics, charge transport, excitation energy transfer, light-harvesting, photocatalysts, field effect transistors, logic gates, organic semiconductors, thin-film-based devices, drug delivery, cell culture, supramolecular differentiation, molecular recognition, molecular tuning, and hand-operating (hand-operated) nanotechnology.

Review of advanced sensor devices employing nanoarchitectonics concepts

Many recent advances in sensor technology have been possible due to nanotechnological advancements together with contributions from other research fields. Such interdisciplinary collaborations fit well with the emerging concept of nanoarchitectonics, which is a novel conceptual methodology to engineer functional materials and systems from nanoscale units through the fusion of nanotechnology with other research fields, including organic chemistry, supramolecular chemistry, materials science and biology. In this review article, we discuss recent advancements in sensor devices and sensor materials that take advantage of advanced nanoarchitectonics concepts for improved performance. In the first part, recent progress on sensor systems are roughly classified according to the sensor targets, such as chemical substances, physical conditions, and biological phenomena. In the following sections, advancements in various nanoarchitectonic motifs, including nanoporous structures, ultrathin films, and interfacial effects for improved sensor function are discussed to realize the importance of nanoarchitectonic structures. Many of these examples show that advancements in sensor technology are no longer limited by progress in microfabrication and nanofabrication of device structures - opening a new avenue for highly engineered, high performing sensor systems through the application of nanoarchitectonics concepts.

Materials nanoarchitectonics at two-dimensional liquid interfaces

Much attention has been paid to the synthesis of low-dimensional materials from small units such as functional molecules. Bottom-up approaches to create new low-dimensional materials with various functional units can be realized with the emerging concept of nanoarchitectonics. In this review article, we overview recent research progresses on materials nanoarchitectonics at two-dimensional liquid interfaces, which are dimensionally restricted media with some freedoms of molecular motion. Specific characteristics of molecular interactions and functions at liquid interfaces are briefly explained in the first parts. The following sections overview several topics on materials nanoarchitectonics at liquid interfaces, such as the preparation of two-dimensional metal-organic frameworks and covalent organic frameworks, and the fabrication of low-dimensional and specifically structured nanocarbons and their assemblies at liquid-liquid interfaces. Finally, interfacial nanoarchitectonics of biomaterials including the regulation of orientation and differentiation of living cells are explained. In the recent examples described in this review, various materials such as molecular machines, molecular receptors, block-copolymer, DNA origami, nanocarbon, phages, and stem cells were assembled at liquid interfaces by using various useful techniques. This review overviews techniques such as conventional Langmuir-Blodgett method, vortex Langmuir-Blodgett method, liquid-liquid interfacial precipitation, instructed assembly, and layer-by-layer assembly to give low-dimensional materials including nanowires, nanowhiskers, nanosheets, cubic objects, molecular patterns, supramolecular polymers, metal-organic frameworks and covalent organic frameworks. The nanoarchitecture materials can be used for various applications such as molecular recognition, sensors, photodetectors, supercapacitors, supramolecular differentiation, enzyme reactors, cell differentiation control, and hemodialysis.

Covalent layer-by-layer thin films with charge-transfer chromophores: side chain engineering for efficient Ag+ ion recognition in aqueous solutions

Covalent layer-by-layer (LbL) thin films are fabricated by a highly efficient [2+2] cycloaddition-retroelectrocyclization (CA-RE) reaction of aniline-substituted alkyne and 7,7,8,8-tetracyanoquinodimethane (TCNQ) moieties. Polystyrene bearing aniline-substituted alkyne side chains and TCNQ polyester were prepared as precursor polymers, then sequentially deposited and fixed by covalent bonds on an indium-tin-oxide (ITO) substrate. The successful alternate growth of the films was demonstrated by many techniques including absorption spectroscopy, surface roughness, and redox activities. Interestingly, the water contact angles of the film surface were dependent on the side chains of the polystyrene derivatives. When hydrophilic triethylene glycol was employed, the surface hydrophilicity was similar to that of the TCNQ polyester. In contrast, the use of hydrophobic n-hexyl groups resulted in a significant difference in the water contact angles between the polystyrene and TCNQ polyester. A similar difference occurred when the Ag+ ion recognition was studied by soaking the LbL films in aqueous solutions. The LbL films constructed from the polystyrene with triethylene glycol chains displayed a more rapid and significant recognition of Ag+ ions than those constructed from the polystyrene with n-hexyl chains.

Antibacterial Polymeric Films Fabricated by [2+2] Cycloaddition-Retroelectrocyclization and Ag+ Ion Coordination

The [2+2] cycloaddition-retroelectrocyclization (CA-RE) between N,N-dialkylaniline-substituted alkynes and 7,7,8,8-tetracyanoquinodimethane (TCNQ) is employed to fabricate functional cross-linked polymer films containing the intramolecular charge-transfer (CT) chromophores at the cross-linking points. Polystyrene bearing N,N-dialkylaniline-substituted alkynes (P1) and TCNQ polyester (P2) are mixed in tetrahydrofuran (THF), then this solution is spray-coated onto an indium tin oxide or glass plate. Heating to 100 °C initiates the [2+2] CA-RE reaction, resulting in the formation of cross-linked polymer films. The reaction progress and completion are evaluated by monitoring the CT absorption band and cyano vibration peaks. The resulting cross-linked polymer films show reversible cathodic electrochromism between the neutral and anion radical states. In addition, they also display the visual detection behavior of protic acids and Lewis acids, such as Ag⁺ ions. Accordingly, the Ag⁺ ion-loaded polymer films are prepared, and their antibacterial activities are studied. As more Ag⁺ ions are loaded, the CT band more bathochromically shifts and more potent antibacterial activities are obtained. Therefore, the antibacterial activity of the polymer films can be visually recognized by the film colors. Furthermore, the loaded Ag⁺ ions can be released from the polymer films by application of an electrochemical potential.

Materials Nanoarchitectonics for Mechanical Tools in Chemical and Biological Sensing

In this Focus Review, nanoarchitectonic approaches for mechanical-action-based chemical and biological sensors are briefly discussed. In particular, recent examples of piezoelectric devices, such as quartz crystal microbalances (QCM and QCM-D) and a membrane-type surface stress sensor (MSS), are introduced. Sensors need well-designed nanostructured sensing materials for the sensitive and selective detection of specific targets. Nanoarchitectonic approaches for sensing materials, such as mesoporous materials, 2D materials, fullerene assemblies, supported lipid bilayers, and layer-by-layer assemblies, are highlighted. Based on these sensing approaches, examples of bioanalytical applications are presented for toxic gas detection, cell membrane interactions, label-free biomolecular assays, anticancer drug evaluation, complement activation-related multiprotein membrane attack complexes, and daily biodiagnosis, which are partially supported by data analysis, such as machine learning and principal component analysis.

Functional Covalent Layer-by-Layer Thin Films by [2 + 2] Cycloaddition-Retroelectrocyclization

Covalent layer-by-layer (LbL) thin films with the well-defined charge-transfer (CT) chromophores were fabricated by the highly efficient [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) reaction between the dialkylaniline-substituted alkynes and 7,7,8,8-tetracyanoquinodimethane (TCNQ) moieties. The resulting thin films showed potent redox activities and Ag⁺ ion sensing ability due to the formed CT chromophores.

Nano Trek Beyond: Driving Nanocars/Molecular Machines at Interfaces

In 2016, the Nobel Prize in Chemistry was awarded for pioneering work on molecular machines. Half a year later, in Toulouse, the first molecular car race, a "nanocar race", was held by using the tip of a scanning tunneling microscope as an electrical remote control. In this Focus Review, we discuss the current state-of-the-art in research on molecular machines at interfaces. In the first section, we briefly explain the science behind the nanocar race, followed by a selection of recent examples of controlling molecules on surfaces. Finally, motion synchronization and the functions of molecular machines at liquid interfaces are discussed. This new concept of molecular tuning at interfaces is also introduced as a method for the continuous modification and optimization of molecular structure for target functions.

Linear-type carbazoledioxazine-based organic semiconductors: the effect of backbone planarity on the molecular orientation and charge transport properties

We report the synthesis of a linear-type dibromocarbazoledioxazine (CZ) derivative as a new precursor for semiconducting polymers. The chemical structures of the CZ unit and its polymers with thiophene or thienothiophene spacers (namely, PCZT and PCZTT) were fully characterized. PCZT and PCZTT possessed similar medium optical band gap (E^opt_g) and electrochemical band gap (E^cv_g) of around 1.70 eV estimated from the onset absorption and electrochemical redox potentials of the thin films, respectively. Computational density functional theory (DFT) calculations suggested that the backbone of the PCZT might be highly twisted, while that of PCZTT could be very planar. The effect of different backbone geometries on the charge–transport properties was studied by using thin film transistors (TFTs). The TFT device based on PCZTT showed a four times higher hole mobility as compared to that based on PCZT. The superior TFT performances of PCZTT were reasonably attributed to its edge-on backbone packing orientations toward the Si substrate revealed by the grazing-incidence wide-angle X-ray scattering (GIWAXS), which was favorable for in-plane charge transport in the TFT devices.

A linear-type dibromocarbazoledioxazine (CZ) derivative and its two polymers are newly designed and synthesized. Structure–property relationship studies reveal that PCZTT shows a four times higher hole mobility than PCZT.