Lysenin Channels as Sensors for Ions and Molecules

Lysenin is a pore-forming protein extracted from the earthworm Eisenia fetida, which inserts large conductance pores in artificial and natural lipid membranes containing sphingomyelin. Its cytolytic and hemolytic activity is rather indicative of a pore-forming toxin; however, lysenin channels present intricate regulatory features manifested as a reduction in conductance upon exposure to multivalent ions. Lysenin pores also present a large unobstructed channel, which enables the translocation of analytes, such as short DNA and peptide molecules, driven by electrochemical gradients. These important features of lysenin channels provide opportunities for using them as sensors for a large variety of applications. In this respect, this literature review is focused on investigations aimed at the potential use of lysenin channels as analytical tools. The described explorations include interactions with multivalent inorganic and organic cations, analyses on the reversibility of such interactions, insights into the regulation mechanisms of lysenin channels, interactions with purines, stochastic sensing of peptides and DNA molecules, and evidence of molecular translocation. Lysenin channels present themselves as versatile sensing platforms that exploit either intrinsic regulatory features or the changes in ionic currents elicited when molecules thread the conducting pathway, which may be further developed into analytical tools of high specificity and sensitivity or exploited for other scientific biotechnological applications.

Transmembrane Signaling with Lipid-Bilayer Assemblies as a Platform for Channel-Based Biosensing

Artificial and natural lipid membranes that elicit transmembrane signaling is are useful as a platform for channel-based biosensing. In this account we summarize our research on the design of transmembrane signaling associated with lipid bilayer membranes containing nanopore-forming compounds. Channel-forming compounds, such as receptor ion-channels, channel-forming peptides and synthetic channels, are embedded in planar and spherical bilayer lipid membranes to develop highly sensitive and selective biosensing methods for a variety of analytes. The membrane-bound receptor approach is useful for introducing receptor sites on both planar and spherical bilayer lipid membranes. Natural receptors in biomembranes are also used for designing of biosensing methods.

Pore-forming compounds as signal transduction elements for highly sensitive biosensing

Pore-forming compounds are attracting much attention due to the signal transduction ability for the development of highly sensitive biosensing. In this review, we describe an overview of the recent advances made by our group in the design of molecular sensing interfaces of spherical and planar lipid bilayers and natural bilayers. The potential uses of pore-forming compounds, such as gramicidin and MCM-41, in lipid bilayers and natural glutamate receptor channels in biomembrane are presented.

Potential analytical applications of lysenin channels for detection of multivalent ions

Transmembrane protein transporters possessing binding sites for ions, toxins, pharmaceutical drugs, and other molecules constitute excellent candidates for developing sensitive and selective biosensing devices. Their attractiveness for analytical purposes is enhanced by the intrinsic amplification capabilities shown when the binding event leads to major changes in the transportation of ions or molecules other than the analyte itself. The large-scale implementation of such transmembrane proteins in biosensing devices is limited by the difficulties encountered in inserting functional transporters into artificial bilayer lipid membranes and by the limitations in understanding and exploiting the changes induced by the interaction with the analyte for sensing purposes. Here, we show that lysenin, a pore-forming toxin extracted from earthworm Eisenia foetida, which inserts stable and large conductance channels into artificial bilayer lipid membranes, functions as a multivalent ion-sensing device. The analytical response consists of concentration and ionic-species-dependent macroscopic conductance inhibition most probably linked to a ligand-induced gating mechanism. Multivalent ion removal by chelation or precipitation restores, in most cases, the initial conductance and demonstrates reversibility. Changes in lipid bilayer membrane compositions leading to the absence of voltage-induced gating do not affect the analytical response to multivalent ions. Microscopic current analysis performed on individual lysenin channels in the presence of Cu(2+) revealed complex open-closed transitions characterized by unstable intermediate sub-conducting states. Lysenin channels provide an analytical tool with a built-in sensing mechanism for inorganic and organic multivalent ions, and the excellent stability in an artificial environment recommend lysenin as a potential candidate for single-molecule detection and analysis.

Biosensors and nanomaterials and their application for mycotoxin determination

Mycotoxin analysis and detection in food and drinks is vital for ensuring food quality and safety, eliminating and controlling the risk of consuming contaminated foods, and complying with the legislative limits set by food authorities worldwide. Most analysis of these toxins is still conducted using conventional methods; however, biosensor methods are currently being developed as screening tools for use in field analysis. Biosensors have demonstrated their ability to provide rapid, sensitive, robust and cost-effective quantitative methods for on-site testing. The development of biosensor devices for different mycotoxins has attracted much research interest in recent years with a range of devices being designed and reported in the scientific literature. However, with the advent of nanotechnology and its impact on the evolution of ultrasensitive devices, mycotoxin analysis is also benefiting from the advances taking place in applying nanomaterials in sensors development. This paper reviews the developments in the area of biosensors and their applications for mycotoxin analysis, as well as the development of micro/nanoarray transducers and nanoparticles and their use in the development of new rapid devices.

Direct detection and discrimination of double-stranded oligonucleotide corresponding to hepatitis C virus genotype 3a using an electrochemical DNA biosensor based on peptide nucleic acid and double-stranded DNA hybridization

Development of an electrochemical DNA biosensor for the direct detection and discrimination of double-stranded oligonucleotide (dsDNA) corresponding to hepatitis C virus genotype 3a, without its denaturation, using a gold electrode is described. The electrochemical DNA sensor relies on the modification of the gold electrode with 6-mercapto-1-hexanol and a self-assembled monolayer of 14-mer peptide nucleic acid probe, related to the hepatitis C virus genotype 3a core/E1 region. The increase of differential pulse voltammetric responses of methylene blue, upon hybridization of the self-assembled probe with the target ds-DNA to form a triplex is the principle behind the detection and discrimination. Some hybridization experiments with non-complementary oligonucleotides were carried out to assess whether the developed DNA sensor responds selectively to the ds-DNA target. Diagnostic performance of the biosensor is described and the detection limit was found to be 1.8 x 10(-12) M in phosphate buffer solution, pH 7.0. The relative standard deviation of measurements of 100 pM of target ds-DNA performed with three independent probe-modified electrodes was 3.1%, indicating a remarkable reproducibility of the detection method.

Free-standing lipid bilayers in silicon chips-membrane stabilization based on microfabricated apertures with a nanometer-scale smoothness

In the present study, we propose a method for preparing stable free-standing bilayer lipid membranes (BLMs). The BLMs were prepared in a microfabricated aperture with a smoothly tapered edge, which was prepared in a nanometer-thick Si(3)N(4) septum by the wet etching method. Owing to this structure, the stress on lipid bilayers at the contact with the septum was minimized, leading to remarkable membrane stability. The BLMs were not broken by applying a constant voltage of +/-1 V. The membrane lifetime was 15-45 h with and without an incorporated gramicidin channel. Gramicidin single-channel currents were recorded from the same BLM preparation when the aqueous solutions surrounding the BLM were repeatedly exchanged, demonstrating the tolerance of the present BLM to repetitive solution exchanges. Such stable membranes enable analysis of channel functions under various solution conditions from the same BLM, which will open up a variety of applications including a high throughput drug screening for ion channels.

Bilayer lipid membrane (BLM) based ion selective electrodes at the meso-, micro-, and nano-scales

This paper presents a novel method for making micron-sized apertures with tapered sidewalls and nano-sized apertures. Their use in bilayer lipid membrane-based ion selective electrode design is demonstrated and compared to mesoscale bilayers and traditional PVC ion selective electrodes. Micron-sized apertures are fabricated in SU-8 photoresist films and vary in diameter from 10 to 40 microm. The tapered edges in SU-8 films are desired to enhance bilayer lipid membrane (BLM) formation and are fabricated by UV-light overexposure. Nano-apertures are made in boron diffused silicon film. The membranes are used as septa to separate two potassium chloride solutions of different concentrations. Lecithin BLMs are assembled on the apertures by ejecting lipid solution. Potassium ionophore, dibenzo-18-crown-6, is incorporated into BLMs by dissolving it in the lipid solution before membrane assembly. Voltage changes with increasing potassium ion concentrations are recorded with an A/D converter. Various ionophore concentrations in BLMs are investigated. At least a 1% concentration is needed for consistent slopes. Electrode response curves are linear over the 10(-6) to 0.1M range with a sub-Nernstian slope of 20mV per Log concentration change. This system shows high selectivity to potassium ions over potential interfering sodium ions. BLMs on the three different aperture sizes at the meso-, micro-, and nano-scales all show similar linear ranges and limits of detection (LODs) as PVC ion selective membranes.

Increasing pH Causes Faster Anion- and Cation-Transport Rates through a Synthetic Ion Channel

Ion-channel mimics are able to transmit electrical signals across phospholipid membranes, and can be envisioned as nanoswitches for molecular electronics. Here, we reported the use of pH to alter ion-transport rates through a synthetic aminocyclodextrin ion channel. Both cation- and anion-transport rates were found to increase with an increase in pH due to the unique electrostatics of the multiple ammonium groups that line the channel pore. Such pH regulation of ion transport rates is unique and can be exploited for sensing applications.

Designing nanosensors based on charged derivatives of gramicidin A

Detection of chemical processes on a single molecule scale is the ultimate goal of sensitive analytical assays. We recently reported the possibility to detect chemical modifications on individual molecules by monitoring a change in the single ion channel conductance of derivatives of gramicidin A (gA) upon reaction with analytes in solution. These peptide-based nanosensors detect reaction-induced changes in the charge of gA derivatives that were engineered to carry specific functional groups near their C-terminus.1 Here, we discuss five key design parameters to optimize the performance of such chemomodulated ion channel sensors. In order to realize an effective sensor that measures changes in charge of groups attached to the C-terminus of a gA pore, the following conditions should be fulfilled: (1) the change in charge should occur as close to the entrance of the pore as possible; (2) the charge before and after reaction should be well-defined within the operational pH range; (3) the ionic strength of the recording buffer should be as low as possible while maintaining a detectable flow of ions through the pore; (4) the applied transmembrane voltage should be as high as possible while maintaining a stable membrane; (5) the lipids in the supporting membrane should either be zwitterionic or charged differently than the derivative of gA. We show that under the condition of high applied transmembrane potential (>100 mV) and low ionic strength of the recording buffer (< or =0.10 M), a change in charge at the entrance of the pore is the dominant requirement to distinguish between two differently charged derivatives of gA; the conductance of the heterodimeric gA pore reported here does not depend on a difference in charge at the exit of the pore. We provide a simple explanation for this asymmetric characteristic based on charge-induced local changes in the concentration of cations near the lipid bilayer membrane. Charge-based ion channel sensors offer tremendous potential for ultrasensitive functional detection since a single chemical modification of each individual sensing element can lead to readily detectable changes in channel conductance.

Label- and marker-free gene detection based on hybridization-induced conformational flexibility changes in a ferrocene-PNA conjugate probe

We report a strategy for label-free and marker-free gene detection transducing the hybridization event to an electrochemical signal based on the hybridization-induced conformational flexibility change in probe structure. The probe structure was designed to possess a ferrocene moiety as a reporter part and a cysteine moiety as an anchor part at each end of a peptide nucleic acid (PNA) as a recognition part. Electrochemical examination of probe-modified gold electrodes revealed that the ferrocene moiety was placed at the flexible end of the linear probe chain. Upon hybridization with a complementary target DNA, the resultant rigid duplex restricted the ferrocene motion to the electrode surface, causing a decrease in the observed current. The target DNA was detected with the detection limit of 1.44 x 10(-11) M. Thus the probe functioned as a 'self-reporting probe' and detection of the target DNA was demonstrated without the need for external indicators. Moreover, the sensor electrode was able repeatedly to detect the target DNA by the process of regeneration and could discriminate a mismatched DNA.

Surface Potential Switching by Metal Ion Complexation/Decomplexation Using Bipyridinethiolate Monolayers on Gold

Surface potential switching on gold(111) surfaces is induced by complexation/decomplexation reactions of a bipyridine (BP) derivative and palladium(II) chloride, as observed by Kelvin probe force microscopy (KFM). On the basis of the theoretical predictions, a 4-(5-phenylethynyl-2,2'-bipyridine-5'-yl-ethynyl)benzenethiol (PhBP) derivative was synthesized and used as an active monolayer to catch transition metal ions. By using the microcontact printing (CP) technique, micron-size patterned PhBP monolayers, which act as effective hosts to coordinate palladium(II) chloride, were prepared on gold(111) surfaces. The KFM signal decreases by complexation of the Pd(II) chloride in PhBP monolayers and is recovered by removal of Pd ions using an ethylenediamine solution, as confirmed by X-ray photoelectron spectroscopy. This process is reversible, indicating that the surface potential switching is realized by complexation/decomplexation of Pd(II). A CP PhBP monolayer, when it detects the target palladium ion, shows sensitivity for the picomolar level detection judged from surface potential changes in KFM measurements. The dipole moment estimated by the surface potentials is much smaller than the calculated value, indicating that mechanisms for the reduction of the surface dipole moment exist in real monolayers prepared by the CP method.

Ion-channel Sensors Based on ETH 1001 Ionophore Embedded in Charged-alkanethiol Self-assembled Monolayers on Gold Electrode Surfaces

An ion-channel sensor was demonstrated by immobilizing ETH 1001, an ionophore for ion-selective electrodes, on a gold electrode surface. The approach for preparing the sensor was to incorporate the ionophore into a mixed self-assembled monolayer of 10-mercaptodecanesulfonate and 11-hydroxy-1-undecanethiol formed on the surface. The voltammetric responses for the thus prepared sensor to the primary cation Ca(2+) were observed by using [Fe(CN)(6)](3-/4-) as an electroactive marker. The ionophore was stably immobilized on the electrode surface with the hydrophobic interaction between its alkyl chains and those of the alkanethiol. The introduction of a proper charge density to the electrode surface improved the sensor sensitivity with retaining the selective response to Ca(2+) against Mg(2+) with concentrations above 10(-4) M.

A MutS Protein-immobilized Au Electrode for Detecting Single-base Mismatch of DNA

A novel electrochemical biosensor was developed to detect gene mutation by using a DNA-mismatch binding protein: MutS from Escherichia coli. The MutS protein was immobilized onto an Au-electrode surface via complex formation between a histidine tag of the MutS protein and a thiol-modified nitrilotriacetic acid chemically adsorbed on the Au-electrode surface. When a target double-stranded DNA having a single-base mismatch was captured by the MutS protein on the electrode, some electrostatic repulsion arose between polyanionic DNA strands and anionic redox couple ions. Consequently, their redox peak currents on a cyclic voltammogram with the Au electrode drastically decreased, depending on the concentration of the target DNA, according to the redox couple-mediated artificial ion-channel principle. By using this assay, one can detect all types of single-base mismatch and single-base deletion.

Charge propagation in "ion channel sensors" based on protein-modified electrodes and redox marker ions

The mechanism of charge propagation in "ion channel sensors" (ICSs) consisting of gold electrodes modified with a layer of charged proteins and highly charged redox-active marker ions in solution was investigated by electrochemical techniques, QCM and AFM. The study is based on seven proteins (concanavalin A, cytochrome c, glucose oxidase, lysozyme, thyroglobulin, catalase, aldolase, and EF1-ATPase) in combination with seven electroactive marker ions ([Fe(CN)6]3-, [Fe(CN)6]4-, [Ru(NH3)6]3+, mono-, di-, and trimeric viologens), as well as a series of suppressor and enhancer ions leading to the following general statements: (i) electrostatic binding of charged marker ions to the domains of the protein is a prerequisite for an electrochemical current and (ii) charge propagation through the layer consists of electron hopping along surface-confined marker ions into the pores between adsorbed proteins. It is further shown that (iii) marker ions and suppressor ions with identical charge compete for oppositely charged sites on the protein domain, (iv) electrostatically bound multilayers of marker or enhancer ions with alternating charge form on a charged protein domain, and (v) self-exchange and exergonic ET catalysis between adsorbed marker ions and marker ions in solution take place. In addition to fundamental insight into the mechanism of charge propagation, valuable information for the design, optimization, and tailoring of new biosensors based on the ICS concept is demonstrated by the current findings.

Gene sensors based on peptide nucleic acid (PNA) probes: relationship between sensor sensitivity and probe/target duplex stability

Gene sensors based on peptide nucleic acid (PNA) probes were prepared and the relationship between sensor sensitivity and the duplex stability of the probe PNAs and target complementary DNAs was studied using five synthesized PNAs (10-, 15-, 17-, 20-, and 22-mers). It was found that the association constants for the probe PNA/target DNA pairs depend not only on the length but also on the base pair sequence, and that the trend in the sensor responses was the same as that in the association constants for the corresponding pairs. In addition, by using two kinds of probe PNAs with different lengths, it was demonstrated that fabrication of sensors based on probe PNAs with comparable association constants yielded similar response curves and sensor sensitivities.

A dot-blot method for quantification of apurinic/apyrimidinic sites in DNA using an avidin plate and liposomes encapsulating a fluorescence dye

A dot-blot method for quantification of apurinic/apyrimidinic (AP) sites in genomic DNA (calf thymus DNA) is described using an avidin-modified glass slip and biotinylated liposomes containing sulforhodamine B as a fluorescence marker. Aldehyde reactive probe (ARP)-tagged DNA was found to be strongly adsorbed on an avidin slip, even if treated with ethanolamine and biotin, with an efficiency of 51% due to the positive surface charge of avidin, and unbound ARP was easily washed out of the surface with Milli-Q water. In the assay protocol, calf thymus DNA containing AP sites is reacted with ARP in solution and immobilized on an ethanolamine- and biotin-treated avidin slip (EAB-avidin slip), followed by incubation with streptavidin. The AP sites were finally quantified with biotinylated liposomes containing 1.5 mM sulforhodamine B as a fluorescence marker. The mean fluorescence intensity over the surface of the slip was an analytically relevant measure of the amount of AP sites in calf thymus DNA. By using the dot-blot assay, 1-5 AP sites per 10(4) nucleotides in 5 and 100 ng of DNA were quantified. The current dot-blot method has potential for quantification of AP sites in genomic DNA at a level of several nanograms.

Single-channel recordings of gramicidin at agarose-supported bilayer lipid membranes formed by the tip-dip and painting methods

Agarose-supported BLMs were prepared by the tip-dip and painting methods, and single-channel recordings of gramicidin were examined for the development of an ion-channel sensor. The supported BLMs formed by the tip-dip method had an electric resistance of >1.0 x 10(11) omega and a longer lifetime as compared with unsupported ones, which enabled single-channel recordings of gramicidin. The supported BLMs formed by the painting method also enabled single-channel recordings, but the lifetime was shorter than that of unsupported planar BLMs formed by the monolayer folding method.

Design, synthesis, and characterization of peptide nanostructures having ion channel activity

We report the synthesis and the functional studies of multiple crown alpha-helical peptides designed to form artificial ion channels. The approach combines the versatility of solid phase peptide synthesis, the conformational predictability of peptidic molecules, and the solution synthesis of crown ethers with engineerable ion-binding abilities. Several biophysical methods were employed to characterize the activity and the mode of action of these crown peptide nanostructures. The 21 residue peptides bearing six 21-EC-7 turned out to facilitate the translocation of ions in a similar fashion to natural ion channels.

Methods of analysis for chemicals that promote/disrupt cellular signaling

Methods of analysis were presented for chemicals that promote or disrupt cellular signaling pathways. The developed analytical methods are based not only on receptor binding, but also on the following known molecular-level processes involved in signal transduction along signaling pathways, reconstituted in vitro or taken in part in living cells. The methods were discussed in relation to receptor binding assay and/or bioassay. Examples include: (1) Insulin signaling pathways; (1-i) Chemical selectivity of agonists for insulin signaling pathways based on agonist-induced phosphorylation of a target peptide; (1-ii) An SPR-based screening method for agonist selectivity for insulin signaling pathways based on the binding of phosphotyrosine to its specific binding protein; (1-iii) A fluorescent indicator for tyrosine phosphorylation-based insulin signaling pathways; (2) An optical method for evaluating ion selectivity for calcium signaling pathways in the cell; (3) Assay and screening of chemicals that disrupt cellular signaling pathways, potential endocrine disruptors in particular; (4) Protein conformational changes, and (5) A screening method for antigen-specific IgE using mast cells, based on intracellular calcium signaling.