Mid-term radiological results of a cementless short humeral component in anatomical and reverse shoulder arthroplasty

Medium-term clinical and radiographic outcomes of a cementless prosthesis with a 140° neck-shaft angle in reverse total shoulder arthroplasty

BACKGROUND

The design of humeral implants has evolved from the initial Grammont design, notably regarding the neck-shaft angle (NSA) and through the use of cementless prostheses. Stress shielding was frequently reported with cementless implants, the 2 main risk factors being humeral stem misalignment and high filling ratios. Our hypothesis was that standard length cementless stems with an NSA of 140° would facilitate good alignment with moderate filling ratios, thereby limiting stress shielding and ensuring good clinical outcomes.

METHODS

A single-center retrospective study was conducted of patients who underwent reverse total shoulder arthroplasty between January 2015 and August 2017, with at least 2 years' follow-up. Clinical evaluations included range of motion measurements and Constant and subjective shoulder values scores. Frontal alignment was assessed in terms of the angle (α) between axes of the stem and of the humerus. Filling ratios were measured in the metaphysis of the humerus, in the diaphysis, and at the distal end of the stem and considered excessive above 0.7. Stress shielding was evidenced radiographically by the observation of medial cortical narrowing, medial metaphysis thinning, lateral metaphysis thinning or under-the-baseplate osteolysis.

RESULTS

Eighty-two shoulders were included and 70 had radiographic follow-up data available. The mean patient age was 78 years and 63/81 patients (78%) were female. The mean follow-up time was 39 ± 7 months. The mean α angle was 1.4° ± 0.9° and was less than 5° in all cases. The mean metaphyseal, diaphyseal, and distal filling ratios were 0.61 ± 0.06, 0.70 ± 0.08, and 0.64 ± 0.09, respectively. The mean Constant score improved from 28 ± 11 preoperatively to 64 ± 14 at last follow-up. The mean subjective shoulder values score at last follow-up was 81 ± 12. Seventy-nine percent of patients (55/70) had at least 1 form of stress-shielding related, which were not associated with clinical outcomes, apart from lateral metaphysis thinning, which was associated with lower active anterior elevation (mean, 106° ± 30° vs. 126° ± 28°; P = .01) and lower Constant scores (mean, 56 ± 17 vs. 65 ± 14; P = .06).

CONCLUSION

The use of cementless reverse shoulder prostheses with a NSA of 140° was associated with good clinical outcomes at 2 years' follow-up. The prosthesis stem was correctly aligned with the humeral axis and the filling ratios were <0.7 in all cases. Stress-shielding was common but, apart from lateral metaphysis thinning, this had no impact on clinical outcomes.

Does the proximal humeral bone quality influence alignment after reverse total shoulder arthroplasty with short humeral stems?

PURPOSE

When compared to standard-length humeral stem in reverse total shoulder arthroplasty (RTSA), short humeral stems in RTSA require good proximal humeral metaphyseal bone quality to gain proper and secure fixation during prosthetic implantation. Shorter humeral stems potentially carry more risk of misalignment than standard or long humeral stems. The hypothesis was that misalignment of the short humeral stems is influenced by regional bone quality.

METHODS

RTSA with a short curved humeral stem with neck-shaft angle (NSA) default of 132.5° was reviewed. The study group included 35 cases at a mean age of 75.97 (± 6.23) years. Deltoid-tuberosity index (DTI) was measured to evaluate proximal humeral bone quality. The deltoid tuberosity index was measured at immediately above position of the upper end of the deltoid tuberosity. Stem alignment was given by the angle measured in degrees between the intramedullary humeral shaft axis and the axis of the humeral implant stem.

RESULTS

The patient's mean DTI was 1.37 ± 0.16 (median, 1.32; range, 1.12-1.80). 22 patients had poor bone quality (DTI < 1.4), compared to 13 patients with acceptable bone quality (DTI > 1.4). After RTSA, ten humeral components (29%) were neutrally aligned, whereas 25 humeral components (71%) were misaligned. There was no correlation between misalignment and DTI (r = 0.117; p = 0.504). But there was a strong correlation between misalignment and the patient's own NSA (r = - 0.47; p = 0.004). The postoperative stem position and stem misalignment are not associated with functional outcomes (p > 0.05).

CONCLUSION

The misalignment of the short curved humeral stem frequently occurs. Poor reginal humeral bone quality does not influence misalignment after RTSA with a short humeral stem. Postoperative stem alignment is associated with the patient's preoperative NSA and method of neck cut. The misalignment does not affect functional outcomes for midterm follow-up. Further long-term follow-up studies are needed to confirm its clinical relevance.

Varus-valgus alignment of humeral short stem in reverse total shoulder arthroplasty: does it really matter?

BACKGROUND

The utilization of short humeral stems in reverse total shoulder arthroplasty has gained attention in recent times. However, concerns regarding the risk of misalignment during implant insertion are associated with their use.

METHODS

Eight fresh-frozen cadaveric shoulders were prepared for dissection and biomechanical testing. A bespoke humeral implant was fabricated to facilitate assessment of neutral, varus, and valgus alignments using a single stem, and 10° was established as the maximum permissible angle for misalignments. Shift in humerus position and changes in deltoid length attributable to misalignments relative to the neutral position were evaluated using a Microscribe 3DLx system. The impingement-free range of motion, encompassing abduction, adduction, internal rotation, and external rotation (ER), was gauged using a digital goniometer. The capacity for abduction was evaluated at maximal abduction angles under successive loading on the middle deltoid. A specialized traction system coupled with a force transducer was employed to measure anterior dislocation forces.

RESULTS

Relative to the neutral alignment, valgus alignment resulted in a more distal (10.5 ± 2.4 mm) and medial (8.3 ± 2.2 mm) translation of the humeral component, whereas the varus alignment resulted in the humerus shifting more superiorly (11.2 ± 1.3 mm) and laterally (9.9 ± 0.9 mm) at 0° abduction. The valgus alignment exhibited the highest abduction angle than neutral alignment (86.2°, P < .001). Conversely, the varus alignment demonstrated significantly higher adduction (18.4 ± 7.4°, P < .001), internal rotation (68.9 ± 15.0°, P = .014), and ER (45.2 ± 10.5°, P = .002) at 0° abduction compared to the neutral alignments. Anterior dislocation forces were considerably lower (23.8 N) in the varus group compared to the neutral group at 0°ER (P = .047). Additionally, abduction capability was markedly higher in varus alignment at low deltoid loads than the neutral alignment (5N, P = .009; 7.5 N, P = .007).

CONCLUSIONS

The varus position enhances rotational range of motion (ROM) but increases instability, while the valgus position does not significantly impact ROM or instability compared to the neutral position.

Two-year minimum survivorship and radiographic analysis of a pressfit short humeral stem for total shoulder arthroplasty

Background

Newer generation humeral stem designs in total shoulder arthroplasty (TSA) are trending towards shorter lengths and uncemented fixation. The goal of this study is to report a 2-yr minimum clinical and radiographic outcomes of an uncemented short-stem press-fit humeral stem in anatomic total shoulder arthroplasty (ATSA) and reverse total shoulder arthroplasty (RTSA).

Methods

A retrospective multicenter database review was performed of all patients who received an uncemented short-length press-fit humeral stem (Equinoxe Preserve humeral stem, Exactech, Inc., Gainesville, FL, USA) in ATSA and RTSA with a minimum two-year follow-up. The primary outcome was the prevalence of humeral stems at risk of radiographic loosening. Secondary outcomes included evaluation of functional outcome scores and prevalence of revision TSA for humeral stem loosening. Two blinded observers performed radiographic analyses, which included humeral stem alignment, canal filling ratio, radiolucent lines, stress shielding (calcar and greater tuberosity), and changes in component position (subsidence and stem shift). At risk stems were defined by the presence of one or more of the following: humeral stem with shifting or subsidence, scalloping of the humeral cortex, or radiolucent lines measuring 2 mm or greater in 3 or more zones.

Results

287 patients (97 ATSA and 190 RTSA) were included in this study. The mean follow-up was 35.9 (±6.1) months. There were significant improvements for all functional outcome scores (P < .05), range of motion (P < .05), and visual analogue pain scale pain (P < .05). The prevalence of humeral stem at risk of radiographic loosening was 1% in the ATSA group (1/97) and 18.4% in the RTSA group (35/190). Calcar resorption was seen in 34% of ATSA and 19% of RTSA, with severe resorption in 12.4% of ATSA and only 3.2% of RTSA. Greater tuberosity resorption was present in 3.1% of ATSA and 7.9% of RTSA. The mean canal filling ratio was 50.2% (standard deviation 11.2%). Using logistic regression, a significant positive correlation between canal filling ratio and stress shielding (P < .01) was seen for both calcar and tuberosity stress shielding. The revision surgery rate was 0% in ATSA compared to 1.6% in RTSA.

Conclusion

This retrospective study demonstrates a low revision rate and low prevalence of humeral stems at risk of radiographic loosening at two years with a press-fit short-stem humeral design in ATSA. Physiologic subsidence of humeral stems can account for higher prevalence of humeral stems at radiographic risk of loosening in RTSA compared to ATSA.

Impact of humeral stem length on calcar resorption in anatomic total shoulder arthroplasty

BACKGROUND

Use of standard-length anatomic total shoulder (TSA) humeral stems has been associated with high rates of medial calcar bone loss. Calcar bone loss has been attributed to stress shielding, debris-induced osteolysis, and undiagnosed infection. Short stem and canal-sparing humeral components may provide more optimal stress distribution and thus lower rates of calcar bone loss related to stress shielding. The purpose of this study is to determine whether implant length will affect the rate and severity of medial calcar resorption.

METHODS

A retrospective review was performed on TSA patients treated with three different-length humeral implants (canal-sparing, short, and standard-length designs). Patients were matched 1:1:1 based on both gender and age (±4 years), resulting in 40 patients per cohort. Radiographic changes in medial calcar bone were evaluated and graded on a 4-point scale, from the initial postoperative radiographs to those at 3 months, 6 months, and 12 months.

RESULTS

The presence of any degree of medial calcar resorption demonstrated an overall rate of 73.3% at one year. At 3 months, calcar resorption was observed in 20% of the canal-sparing cohort, while the short and standard designs demonstrated resorption in 55% and 52.5%, respectively (P = .002). At 12 months, calcar resorption was seen in 65% of the canal-sparing design, while both the short and standard designs had a 77.5% rate of resorption (P = .345). The severity of calcar resorption for the canal-sparing cohort was significantly lower at all time points when compared to the short stem (3 months, P = .004; 6 months, P = .003; 12 months, P = .004) and at 3 months when compared to the standard-length stem (P = .009).

CONCLUSION

Patients treated with canal-sparing TSA humeral components have significantly lower rates of early calcar resorption with less severe bone loss when compared to patients treated using short and standard-length designs.

Implications of humeral short-stem diametral sizing on implant stability

Background

Shoulder arthroplasty humeral stem design has evolved to include various shapes, coatings, lengths, sizes, and fixation methods. While necessary to accommodate patient anatomy characteristics, this creates a surgical paradox of choice. The relationship between the surgeon's selection of short-stem implant size and construct stiffness, resistance to subsidence and micromotion has not been assessed.

Methods

Eight paired cadaveric humeri were reconstructed with surgeon-selected (SS) and 2-mm diametrically larger (SS+2) short-stemmed press-fit implants. Each reconstruction was subjected to 2000 cycles of 90° forward flexion loading, and stem subsidence and micromotion were measured using optical tracking. Compressive stiffness of the stem-bone reconstruction was then assessed by applying a load in-line with the stem axis that resulted in 5 mm of stem subsidence.

Results

Increasing stem size by 2 mm resulted in the construct stiffness more than doubling compared to SS stems (-741 ± 243 N/mm vs. -334 ± 120 N/mm; P = .003; power = 0.971). These larger stems also subsided significantly less than their SS counterparts (SS: 1.2 ± 0.6 mm; SS+2: 0.5 ± 0.5 mm; P = .029; power = 0.66), though there were no significant changes in micromotion (SS: 169 ± 59 μm; SS+2: 187 ± 52 μm; P = .506; power = 0.094).

Conclusions

The results of this study highlight the importance of proper short-stem sizing, as a relatively small 2 mm increase in diametral size was observed to significantly impact construct stiffness, which could increase the risk of stress shielding and implant loosening. Future work should focus on developing tools that objectively quantify bone quality and aid surgeons in selecting the appropriate size short-stem humeral implants for a particular patient.

Multiplanar analysis of proximal humerus anatomy of patients with rotator cuff arthropathy and relevance to reverse shoulder press-fit stems

Background

Short stems have become increasingly popular in reverse shoulder arthroplasty (RSA) due to their ability to preserve bone stock for revision surgery. However, short stems may be more at risk for malalignment or loosening, and commercially available stems have varied designs. The purpose of this study was to perform a multiplanar analysis of proximal humerus anatomy in patients with rotator cuff arthropathy to better define canal geometry and identify differences based on sex.

Methods

A retrospective review was performed of a consecutive series of patients undergoing RSA for rotator cuff arthropathy. A total of 117 patients were identified with preoperative computed tomography scans. Measurements were undertaken following multiplanar reconstruction of the computed tomography scans. Measured parameters included the following: transition point (TP), anteroposterior (AP) and mediolateral (ML) distances, intramedullary (IM) and bone diameter, and cortical thickness. The TP was defined as the distance from the periosteal border of the greater tuberosity to the level of the IM canal where the endosteal borders became parallel. Measurements started at the metaphysis, and then proceeded 25 and 50 mm distal to the metaphysis followed by 10 mm increments thereafter. Each level was compared to the level above with t tests in the overall cohort and separately by sex. Height was correlated to ML-AP difference and IM diameter with Pearson correlation coefficient. Potential stem sizes that extended 50, 60, 70, and 80 mm from the metaphysis were analyzed to record the percentage of patients in whom the stem would reach past the TP.

Results

The mean TP for all patients was 55.6 ± 7.4 mm (37.5-78.4) from the greater tuberosity, 53.3 ± 6.6 mm (37.5-67.0) in females and 58.1 ± 7.5 mm (41.9-78.4) in males. ML and AP distances and IM diameter became consistent at level 3 (mean, 83 mm distal to the greater tuberosity) in the overall cohort and in both sexes. Height positively correlated with IM diameter. Males had significantly larger IM diameters compared to females at all levels. Cortical thickness remained relatively consistent throughout the proximal humerus. A stem length of 70 mm would extend past the TP in 98% of patients.

Conclusion

Humeral implants in RSA with a stem of at least 70 mm in length would extend distally past the TP in the majority of cases regardless of sex. At this point, the canal's area remains consistent which would facilitate diaphyseal fixation if required.

Short-term radiographic analysis of a stemless humeral component for anatomic total shoulder arthroplasty

Background

Standard stemmed humeral implants have traditionally been utilized for total shoulder arthroplasty (TSA) with a recent trend to implant smaller stems including short and stemless humeral designs. However, the rate of stress shielding after stemless TSA has not been primarily studied. Therefore, the objective of this study is to report the short-term survivorship and radiographic analysis of a stemless humeral implant.

Methods

A retrospective cohort review of a prospectively collected, multicenter database for patients undergoing total shoulder arthroplasty with a stemless humeral design (Equinoxe Stemless; Exactech, Inc., Gainesville, FL, USA) with a minimum of 2 years clinical and radiographic follow-up was performed. The primary outcomes were to report the location and rate of stress shielding from a radiographic analysis of the humeral stem. Additionally, the revision rate of the humeral stem is reported. The secondary outcomes included ASES scores, visual analog scale (VAS) pain scores, and range of motion (ROM). Radiographs (anterior-posterior/Grashey and axillary) were reviewed blindly by two fellowship trained shoulder surgeons. Radiographic analysis included stress shielding (partial or complete cortical resorption) and subsidence or shift in component position.

Results

Fifty four patients were included in this study with an average follow-up of 27 months (range 24-32 months). The average age of this cohort was 65 years (range 57-73 years) with 23 patients (43%) being female. Stress shielding was observed in 4 patients (7%) with the medial calcar being the most common location of stress shielding. Three of the 4 patients (75%) had evidence of partial resorption while 1 patient (25%) had evidence of complete resorption. No humeral component shift or subsidence was observed. There were no revisions due to humeral component complications. There was 1 revision surgery for aseptic glenoid loosening. A significant improvement for all clinical outcome measures was seen including with respect to VAS pain, which improved from 6.2 to 1.8 (P < .05), ASES, which improved from 38.2 to 81.8 (P < .05), and ROM which forward flexion improved from 120 degrees to 153 degrees (P < .05) and external rotation improved from 29 degrees to 49 degrees (P < .05).

Discussion

This ongoing study demonstrates a low rate of stress shielding for a stemless design humeral implant at short-term follow-up without any revision surgery due to humeral component complications. Longer term radiographic and clinical analysis with this cohort will be needed to confirm these findings and theoretical benefits for future revision surgeries.

Stemless shoulder arthroplasty

The concept of stemless shoulder arthroplasty was born in 2005. It is now a valid option in the context of either anatomical or reverse shoulder replacement. Several questions have come up over our 15 years of using this system: How was the stemless shoulder arthroplasty concept born? It was motivated by a desire to have epiphyso-metaphyseal fixation using a corolla-shaped impacted anchor design. What are the features of commercially available stemless shoulder arthroplasty implants? The stemless anatomical implants now available have either a cage or central peg that is impacted or a system that is screwed into the epiphysometaphyseal bone. Several companies have introduced stemless reverse implants, some of which have an onlay configuration. How do the results of stemless implants compare to those of traditional stemmed implants? At a mean follow-up of 10 years, the outcomes of stemless TSA can be superimposed with those of traditional stemmed TSA. What are the advantages of stemless shoulder implants? The advantages are their simple implantation, ability to adapt to patient morphology and any malunions, various orientation angles, no stress-shielding, reduced risk of infection and bleeding and less complex revision surgery (if needed). What are the limitations or drawbacks of using stemless implants? The two main limitations are insufficient metaphyseal bone stock and poor bone quality, especially for reverse configurations. What does the future hold for stemless shoulder arthroplasty? Like with traditional stemmed implants, the longevity of stemless shoulder arthroplasty depends on its tribology, which can still be improved. In the future, a stemless implant will need to be convertible like stemmed humeral implants, and if possible, provide an inlay reverse configuration.

Stress shielding following stemless anatomic total shoulder arthroplasty

Background

Finite element analysis has suggested that stemless implants may theoretically decrease stress shielding. The purpose of this study was to assess the radiographic proximal humeral bone adaptations seen following stemless anatomic total shoulder arthroplasty.

Methods

A retrospective review of 152 prospectively followed stemless total shoulder arthroplasty utilizing a single implant design was performed. Anteroposterior and lateral radiographs were reviewed at standard time points. Stress shielding was graded as mild, moderate, and severe. The effect of stress shielding on clinical and functional outcomes was assessed. Also, the influence of subscapularis management on the occurrence of stress shielding was determined.

Results

At 2 years postoperatively, stress shielding was noted in 61 (41%) shoulders. A total of 11 (7%) shoulders demonstrated severe stress shielding with 6 occurring along the medial calcar. There was one instance of greater tuberosity resorption. At the final follow-up, no humeral implants were radiographically loose or migrated. There was no statistically significant difference in clinical and functional outcomes between shoulders with and without stress shielding. Patients undergoing a lesser tuberosity osteotomy had lower rates of stress shielding, which was statistically significant (p = 0.021).

Discussion

Stress shielding does occur at higher rates than anticipated following stemless total shoulder arthroplasty, but was not associated with implant migration or failure at 2 years follow-up.

Level of evidence

IV, Case series.

Cemented vs. uncemented reverse total shoulder arthroplasty for the primary treatment of proximal humerus fractures in the elderly-a retrospective case-control study

BACKGROUND

Uncemented reverse total shoulder arthroplasty (RTSA) for the primary treatment of proximal humerus fractures (PHF) in elderly patients was introduced at our institution in 2017. Recent reports have raised concerns about increased rates of early bone resorption at the proximal humerus with uncemented fracture stems. The aim of this study was to find out whether there was any difference in functional or radiographic outcomes between cemented and uncemented RTSA for PHF.

METHODS

Seventeen consecutive patients who underwent uncemented RTSA (group nC) in 2017 and 2018 were age and sex matched (propensity score matching 1:2) to 34 patients with cemented RTSA implanted between 2011 and 2016 (group C) for the primary treatment of PHF. These two groups were compared in terms of clinical and radiographic outcomes at 2 years after the index surgery.

RESULTS

The mean bone quality was low in both groups: in group nC the deltoid tuberosity index (DTI) was 1.43 (1.22-1.72) and in group C 1.42 (1.22-1.67). At the final 2 year follow-up, the relative CS was 98.3% (71-118) in group nC and 97.9% (36-125) in group C (p = 0.927); the absolute CS was 70.2 (49-89) in group nC and 68.0 (30-94) in group C (p = 0.509). Lucent lines at the humeral site were seen in 8 cases (47%) in group nC and in 13 cases (38%) in group C (p = 0.056). Compared to 3% in group C, all patients in group nC showed at least grade 1 and 65% showed grade 3 bone resorption at the proximal humerus (p < 0.001).

CONCLUSION

Compared to cemented RTSA bone resorption at the proximal humerus was significantly more frequent in patients with uncemented RTSA for PHF. So far, this is rather a radiographic than a clinical finding, because both groups showed very satisfying functional outcomes and low revision rates at the 2 year follow-up.

LEVEL OF EVIDENCE III

A retrospective case-control study.

Clinical results and 10-year survivorship of the Synthes Epoca resurfacing total shoulder arthroplasty

Aims

This prospective cohort study reports the 10-year survivorship, patient-reported outcome measures and radiographic outcomes of the first series of the Epoca resurfacing head total shoulder arthroplasty.

Methods

From July 2008 to July 2014, 59 Epoca resurfacing head total shoulder arthroplasties were implanted in 50 patients by a single surgeon. Minimum 4.8 year and maximum 11.3 year follow-up (mean: 7.9 years) was analysed using the latest available Oxford Shoulder Score. Kaplan-Meier survivorship analysis was performed with revision as the end point. Most recent radiographs were reviewed for component radiolucency, osteolysis and proximal humeral migration.

Results

Two shoulders underwent revision (3.4%); one for pain with posterior subluxation following a fall, the other for pain with failure of the glenoid. Kaplan-Meier analysis revealed 10-year survivorship of 98.2% (95% confidence intervals: 88.0%-99.8%). Mean Oxford Shoulder Score improved significantly compared to pre-operative values from 18.2 (5-45) to 46.6 (36-48) (p < 0.001). Fifty-three shoulders underwent radiographic analysis (89.8%). This revealed humeral radiolucency in two cases (3.8%), glenoid radiolucency in three cases (5.7%) and radiographic rotator cuff failure in eight cases (15.1%).

Conclusion

This prospective cohort study shows excellent 10-year survivorship, medium to long-term clinical and radiological results and for the Synthes Epoca resurfacing head total shoulder arthroplasty.

Evidence level

IV.

Innovations in Shoulder Arthroplasty

Innovations currently available with anatomic total shoulder arthroplasty include shorter stem designs and augmented/inset/inlay glenoid components. Regarding reverse shoulder arthroplasty (RSA), metal augmentation, including custom augments, on both the glenoid and humeral side have expanded indications in cases of bone loss. In the setting of revision arthroplasty, humeral options include convertible stems and newer tools to improve humeral implant removal. New strategies for treatment and surgical techniques have been developed for recalcitrant shoulder instability, acromial fractures, and infections after RSA. Finally, computer planning, navigation, PSI, and augmented reality are imaging options now available that have redefined preoperative planning and indications as well intraoperative component placement. This review covers many of the innovations in the realm of shoulder arthroplasty.

Using standard-length compactors to implant short humeral stems in total shoulder arthroplasty: A cadaver study of humeral stem alignment

Background

Short-stem implants in shoulder arthroplasty were recently developed and reported clinical outcomes are good. However, radiological analysis often reveals humeral stem misalignment in the frontal plane, along with high filling ratios that can lead to proximal bone remodeling under stress shielding. The aim of this cadaveric study was to test whether using compactors for standard-length (> 100 mm) stems to implant short (< 100 mm) stems reduces the risk of stem misalignment without compromising in terms of a higher filling ratio.

Methods

In a cadaveric study, twenty short stems were implanted using instrumentation for standard-length stems. Alignment and filling ratios were evaluated on anteroposterior radiographs for both the compactors and the stems. The angular deviations (α) from the humeral axis of the compactors and the short stems were measured. Misalignment was defined as |α| > 5°. Metaphyseal and diaphyseal filling ratios were calculated and defined as either high (≥ 0.7) or low (< 0.7).

Results

The median angular deviations of the compactors and the short stems were respectively 1.6° (range, 0.03 to 5.9°) and 1.3° (range, 0.3 to 9.6°). Nineteen of the 20 compactors (95%) and 17/20 short stems (85%) were correctly aligned. The proportions of correctly aligned compactors and stems were not significantly different (95% CI, −0.33 to 0.11; Z-test of proportions p = .60), and the respective angular deviations were significantly correlated (Spearman ρ = .60, p = 0.006). The diaphyseal and metaphyseal filling ratios of the compactors and the stems were all low.

Conclusions

In this series of 20 implants in cadavers, the narrow short humeral stems implanted with compactors for standard-length stems were correctly aligned with the humeral axis. This approach may be a way to achieve both correct frontal alignment and low filling ratios.

The Definition of Periprosthetic Osteolysis in Shoulder Arthroplasty: A Systematic Review of Grading Schemes and Criteria

BACKGROUND

Periprosthetic osteolysis is a known complication after shoulder arthroplasty that may lead to implant loosening and revision surgery. To date, there is no consensus in the shoulder arthroplasty literature regarding the definition of osteolysis or the grading criteria, thus making it difficult to quantify and compare outcomes involving this complication. The purpose of this study was to perform a systematic review of the literature to assess how periprosthetic osteolysis in shoulder arthroplasty is defined and evaluated radiographically.

METHODS

A systematic review of MEDLINE, Scopus, Cochrane, and CINAHL was performed in August 2021 for studies that provided a definition and/or grading criteria for osteolysis in shoulder arthroplasty. Only studies with a minimum of 2 years of radiographic follow-up were included.

RESULTS

Thirty-four articles met the inclusion criteria. After consolidating studies by the same primary author that included the same grading criteria, 29 studies were examined for their definition and grading criteria for osteolysis. Of these, 19 (65.5%) evaluated osteolysis surrounding the glenoid and 18 (62.1%) evaluated osteolysis surrounding the humerus. There was considerable heterogeneity in the systems used to grade periprosthetic osteolysis surrounding the glenoid, whereas humeral periprosthetic osteolysis was often categorized via visualization into binary or categorical groups (e.g., presence versus absence; mild, moderate, or severe; partial versus complete). Four studies (13.8%) provided novel measurements for assessing either glenoid or humeral osteolysis.

CONCLUSIONS

Considerable heterogeneity exists in the assessment and grading of periprosthetic osteolysis in shoulder arthroplasty. The most common grading systems were binary and used qualitative visual interpretation, making them relatively subjective and prone to bias. Quantitative measurements of osteolysis were infrequently utilized. A standardized method of assessing osteolysis would be of value to facilitate communication and research efforts.

Measuring Patient Value after Total Shoulder Arthroplasty

Evaluating the value of health care is of paramount importance to keep improving patients' quality of life and optimizing associated costs. Our objective was to present a calculation method based on Michael Porter's formula and standard references to estimate patient value delivered by total shoulder arthroplasty (TSA). We retrospectively reviewed the records of 116 consecutive TSAs performed between June 2015 and June 2019. Patient value was defined as quality of care divided by direct costs of surgery. Quality metrics included intra- and postoperative complications as well as weighted improvements in three different patient-reported outcome measures at a minimum of one-year follow-up. Direct costs of surgery were retrieved from the management accounting analyses. Substantial clinical benefit (SCB) thresholds and the standard reimbursement system were used as references for quality and cost dimensions. A multivariable linear regression was performed to identify factors associated with patient delivered value. Compared to a reference of 1.0, the quality of care delivered to patients was 1.3 ± 0.3 (range, 0.6-2.0) and the associated direct cost was 1.0 ± 0.2 (range, 0.7-1.6). Ninety patients (78%) had a quality of care ≥1.0 and 61 patients (53%) had direct costs related to surgery ≤1.0. The average value delivered to patients was 1.3 ± 0.4 (range, 0.5-2.5) with 91 patients (78%) ≥ 1.0, was higher for non-smokers (beta, 0.12; p = 0.044), anatomic TSA (beta, 0.53; p < 0.001), increased with higher pre-operative pain (beta, 0.08; p < 0.001) and lower pre-operative Constant score (beta, -0.06; p = 0.001). Our results revealed that almost 80% of TSAs provided substantial patient value. Patient pre-operative pain/function, tobacco use, and procedure type are important factors associated with delivered patient value.

Problems, complications, and reinterventions in 4893 onlay humeral lateralized reverse shoulder arthroplasties, a systematic review: part II-problems and reinterventions

BACKGROUND

Several modifications to the original Grammont reverse shoulder arthroplasty (RSA) design have been proposed to prevent distinctive issues, such as both glenoid and humeral lateralization. The aim of this systematic review was to determine rates of problems, complications, reoperations, and revisions after onlay lateralized humeral stem RSA, hypothesizing that these are design related.

METHODS

This systematic review was performed in accordance with the PRISMA statement guidelines. A literature search was conducted (1 January 2000 to 14 April 2020) using PubMed, Cochrane Reviews, Scopus, and Google Scholar, employing several combinations of keywords: "reverse shoulder arthroplasty," "reverse shoulder prosthesis," "inverse shoulder arthroplasty," "inverse shoulder prosthesis," "problems," "complications," "results," "outcomes," "reoperation," and "revision."

RESULTS

Thirty-one studies with 4893 RSA met inclusion criteria. The 892 postoperative problems and 296 postoperative complications represented overall problem and complication rates of 22.7% and 7.5%, respectively. Forty-one reoperations and 63 revisions resulted, with overall reoperation and revision rates of 1.7% and 2.6%, respectively.

CONCLUSIONS

Problem, complication, and reintervention rates proved acceptable when implanting a high humeral lateralization stem RSA. The most frequent problem was scapular notching (12.6%), and the most common postoperative complication was scapular stress fracture (1.8%). An overall humeral complication rate of 1.9% was identified, whereas no humeral fractures or stem loosening were reported with short stems. Infections (1.3%) were the most common reason for component revision, followed by instability (0.8%).

LEVEL OF EVIDENCE

Systematic review IV.

A Comparison of Revision Rates for Osteoarthritis of Primary Reverse Total Shoulder Arthroplasty to Primary Anatomic Shoulder Arthroplasty with a Cemented All-polyethylene Glenoid: Analysis from the Australian Orthopaedic Association National Joint Replacement Registry

BACKGROUND

There has been decreased use of anatomic total shoulder arthroplasty (aTSA) because reverse TSA (rTSA) is increasingly being used for the same indications. Although short-term studies generally have not found survivorship differences between these implant designs, these studies are often small and their follow-up is limited to the short term. Likewise, the degree to which patient characteristics (such as gender, age, and American Society of Anesthesiologists [ASA] score) may or may not be associated with survivorship differences calls for larger and longer-term studies than is often possible in single-center designs. Large national registry studies may be able to help answer these questions.

QUESTIONS/PURPOSES

By analyzing a large Australian registry series of primary aTSAs with cemented all-polyethylene glenoids and rTSA for osteoarthritis (OA), we asked: (1) Is the revision risk for OA higher for aTSA with all-polyethylene glenoids or for rTSA, adjusting for patient characteristics such as age, gender, ASA score, and BMI? (2) Is the patient's gender associated with differences in the revision risk after controlling for the potentially confounding factors of age, ASA score, and BMI?

METHODS

In this comparative, observational registry study performed between January 1, 2015, and December 31, 2019, all primary aTSAs with all-polyethylene glenoids and rTSA for OA as determined by the treating surgeon and reported to our national registry formed two groups for analysis. The study period was set to time-match for the collection of ASA score and BMI in 2012 and 2015, respectively. Our registry enrolls more than 97% of all shoulder arthroplasties undertaken in Australia. There were 29,294 primary shoulder arthroplasties; 1592 hemiarthroplasties, 1876 resurfacing and stemless shoulders, 269 stemmed, and 11,674 reverse shoulder arthroplasties were excluded for other diagnoses. A total of 1210 metal-backed glenoids in stemmed aTSA for OA were excluded. A total of 3795 primary aTSAs with all-polyethylene glenoids and 8878 primary rTSAs for OA were compared. An aTSA with an all-polyethylene glenoid and rTSA were more likely to be performed in women (56% and 61% of patients, respectively). The mean age was 69 ± 8 years for aTSA with all-polyethylene glenoids and 74 ± 8 years for rTSA. One aTSA for OA was performed in a patient with an unknown glenoid type. The ASA score (n = 12,438) and BMI (n = 11,233) were also recorded. The maximum follow-up was 5 years for both groups, and the mean follow-up was 2.6 ± 1.4 years for aTSA with all-polyethylene glenoids and 2.1 ± 1.4 years for rTSA. The endpoint was time to revision (all causes), and the cumulative percent revision was determined using Kaplan-Meier estimates of survivorship (time to revision) and HRs from Cox proportional hazard models that were adjusted for age, gender, ASA score, and BMI category.

RESULTS

Overall, there were no differences in the 4-year cumulative percent revision between the groups; the 4-year cumulative percent revision was 3.5% for aTSA with all-polyethylene glenoids (95% CI 2.9%-4.2%) and 3.0% for rTSA (95% CI 2.6%-3.5%). There was an increased risk of revision of rTSA compared with aTSA using all-polyethylene glenoids in the first 3 months (HR 2.17 [95% CI 1.25-3.70]; p = 0.006, adjusted for age, gender, ASA score, and BMI). After that time, there was no difference in the rate of revision, with the same adjustments. In the first 3 months, men undergoing rTSA had a higher rate of revision than men with aTSA using all-polyethylene glenoids (HR 4.0 [95% CI 1.72-9.09]; p = 0.001, adjusted for age, BMI, and ASA). There was no difference between men in the two groups after that time. Women with aTSA using all-polyethylene glenoids were at a greater risk of revision than women with rTSA from 3 months onward (HR 2.77 [95% CI 1.55-4.92]; p < 0.001, adjusted for age, BMI, and ASA), with no difference before that time.

CONCLUSION

Given the absence of survivorship differences at 4 years between rTSA and aTSA, but in light of the differences in the revision risk between men and women, surgeons might select an aTSA with an all-polyethylene glenoid to treat OA, despite the current popularity of rTSA. However, there are survivorship differences between genders. Future studies should evaluate whether our comparative findings are replicated in men and women undergoing aTSA with all-polyethylene glenoids and rTSA for primary diagnoses such as rheumatoid arthritis or post-traumatic arthritis, and whether there are functional differences between the two implant designs when used for OA.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Long-term survival and failure analysis of anatomical stemmed and stemless shoulder arthroplasties

AIMS

The purpose of this study was to compare clinical results, long-term survival, and complication rates of stemless shoulder prosthesis with stemmed anatomical shoulder prostheses for treatment of osteoarthritis and to analyze radiological bone changes around the implants during follow-up.

METHODS

A total of 161 patients treated with either a stemmed or a stemless shoulder arthroplasty for primary osteoarthritis of the shoulder were evaluated with a mean follow-up of 118 months (102 to 158). The Constant score (CS), the Disabilities of the Arm, Shoulder and Hand (DASH) score, and active range of motion (ROM) were recorded. Radiological analysis for bone adaptations was performed by plain radiographs. A Kaplan-Meier survivorship analysis was calculated and complications were noted.

RESULTS

The ROM (p < 0.001), CS (p < 0.001), and DASH score (p < 0.001) showed significant improvements after shoulder arthroplasty for both implants. There were no differences between the groups treated with stemmed or stemless shoulder prosthesis with respect to the mean CS (79.2 (35 to 118) vs 74.4 (31 to 99); p = 0.519) and DASH scores (11.4 (8 to 29) vs 13.2 (7 to 23); p = 0.210). The ten-year unadjusted cumulative survival rate was 95.3% for the stemmed anatomical shoulder prosthesis and 91.5% for the stemless shoulder prosthesis and did not differ between the treatment groups (p = 0.251). The radiological evaluation of the humeral components in both groups did not show loosening of the humeral implant. The main reason for revision for each type of arthroplasties were complications related to the glenoid.

CONCLUSION

The use of anatomical stemless shoulder prosthesis yielded good and reliable results and did not differ from anatomical stemmed shoulder prosthesis over a mean period of ten years. The differences in periprosthetic humeral bone adaptations between both implants have no clinical impact during the follow-up. Cite this article: Bone Joint J 2021;103-B(7):1292-1300.

Problems, complications, and reinterventions in 4893 onlay humeral lateralized reverse shoulder arthroplasties: a systematic review (part I-complications)

Background

Several modifications to the original Grammont reverse shoulder arthroplasty (RSA) design have been proposed to prevent distinctive issues, such as both glenoid and humeral lateralization. The aim of this systematic review was to determine rates of problems, complications, reoperations, and revisions after onlay lateralized humeral stem RSA, hypothesizing that these are design related.

Methods

This systematic review was performed in accordance with the PRISMA statement guidelines. A literature search was conducted (01.01.2000–14.04.2020) using PubMed, Cochrane Reviews, Scopus, and Google Scholar employing several combinations of keywords: “reverse shoulder arthroplasty,” “reverse shoulder prosthesis,” “inverse shoulder arthroplasty,” “inverse shoulder prosthesis,” “problems,” “complications,” “results,” “outcomes,” “reoperation,” “revision.”

Results

Thirty-one studies with 4893 RSA met inclusion criteria. The 892 postoperative problems and 296 postoperative complications represented overall problem and complication rates of 22.7% and 7.5%, respectively. Forty-one reoperations and 63 revisions resulted, with an overall reoperation rate of 1.7% and overall revision rate of 2.6%.

Conclusions

Problem, complication, and reintervention rates proved acceptable when implanting a high humeral lateralization stem in RSA. The most frequent problem was scapular notching (12.6%), and the most common postoperative complication was scapular stress fracture (1.8%). An overall humeral complication rate of 1.9% was identified, whereas short stems reported no humeral fractures or stem loosening. Infections (1.3%) proved to be the most common reason for component revision, and instability had a complication rate of 0.8%.

Level of evidence

Systematic review IV

Value Analysis of Anatomic and Reverse Shoulder Arthroplasty for Glenohumeral Osteoarthritis with an Intact Rotator Cuff

BACKGROUND

While anatomic total shoulder arthroplasty (TSA) has historically been considered the ideal treatment for end-stage glenohumeral osteoarthritis, reverse shoulder arthroplasty (RSA) has recently gained popularity. With substantial differences in implant design and cost between TSA and RSA, further investigation of outcomes and value is needed to support recent trends. The purpose of this study was to use the average and incremental cost-effectiveness ratio (ACER and ICER) and the procedure value index (PVI) to examine differences in outcomes and value between TSA and RSA for treatment of glenohumeral osteoarthritis with an intact rotator cuff.

METHODS

We performed a retrospective matched-cohort study of patients treated with primary shoulder arthroplasty for osteoarthritis with an intact rotator cuff who had a minimum 2-year follow-up. Outcome measures analyzed included the Simple Shoulder Test (SST), American Shoulder and Elbow Surgeons (ASES) questionnaire, visual analog scale (VAS) for pain, Single Assessment Numeric Evaluation (SANE), and overall satisfaction. Patients treated with TSA were matched 4:1 to those treated with RSA based on sex, age, and preoperative SST score. Value differences between TSA and RSA were calculated. Radiographs were analyzed for preoperative glenoid classification and postoperative radiolucent lines and gross loosening.

RESULTS

Two hundred and fifty-two TSA-treated patients were matched to 63 RSA-treated patients with no significant differences in sex, age, or preoperative SST score. Total hospitalization costs, charges, and reimbursements along with outcome improvements in units of minimal clinically important differences (MCIDs) and patient satisfaction did not differ between the groups. For RSA, the implant cost was significantly higher than that for TSA, but the operating room, anesthesia, and cement costs were lower. The TSA group had a 3.2% rate of gross glenoid loosening and a 2.4% revision rate. There was no loosening or revision in the RSA group. None of the value analytics differed between groups even after inclusion of the outcomes and costs of early TSA revisions.

CONCLUSIONS

TSA and RSA demonstrated similar outcomes and value when used to manage glenohumeral osteoarthritis with an intact rotator cuff.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Primary reverse shoulder replacement with a short stem: A systematic literature review

Background

Total shoulder arthroplasty implant designs have continued to evolve over the years. One recent change has been the shortening of the humeral component to preserve bone stock and to facilitate revision surgery. Despite promising clinical results, radiographic bone adaptions occur frequently in short-stem total shoulder arthroplasty, and limited data exist on short-stem reverse shoulder arthroplasty (RSA). The purpose of this systematic review was to provide an overview about the functional and radiographic outcomes after an uncemented short-stem RSA, as well as identify areas of clinical importance that are underreported in the current literature.

Methods

A systematic review of the literature was performed in accordance with the PRISMA guidelines using PubMed, Cochrane Central Register of Controlled Trials, and EMBASE. Clinical outcome studies reporting on short-stem RSA outcomes with evidence level I-IV were included. Demographics, clinical and radiological outcomes, as well as complications and revision data were systematically analyzed and described.

Results

Ten studies, published between 2014 and 2019, reporting on 555 shoulders with a mean follow-up of 32 months (range, 20-99.6 months) met the inclusion criteria. For all studies cuff tear arthropathy was the main indication for RSA (36%), followed by primary osteoarthritis (20%). Clinical outcome was reported in nine of ten studies, with range of motion improving in all studies. Six of the seven studies that used the Constant score (CS) demonstrated significant improvement (27.9 points to 69.3 points in weighted means). All studies reported on radiographic changes and bone adaptions. Among these, scapular notching was the most commonly observed (60 out of 327 cases, 18%) but without any described implication on clinical outcomes. No stem loosening was recorded at any final follow-up. A total of 63 complications (12.9%) were reported, with scapula fractures being the most commonly reported complication. Revision surgery was necessary in 24 cases (4.9%).

Conclusion

Good clinical results, comparable with long-stem RSAs, are reported at short-term follow-up for short-stem RSAs. Humeral bone adaptions occur frequently but aseptic stem loosening is not a matter of concern at short-term follow-up. An area of clinical importance that is under-reported is the relation between filling ratio and stem alignment in short-stem RSA.

Clinical results and survivorship of the Mathys Affinis Short, Short Stem Total Shoulder Prosthesis

AIMS

The Mathys Affinis Short is the most frequently used stemless total shoulder prosthesis in the UK. The purpose of this prospective cohort study is to report the survivorship, clinical, and radiological outcomes of the first independent series of the Affinis Short prosthesis.

METHODS

From January 2011 to January 2019, a total of 141 Affinis Short prostheses were implanted in 127 patients by a single surgeon. Mean age at time of surgery was 68 (44 to 89). Minimum one year and maximum eight year follow-up (mean 3.7 years) was analyzed using the Oxford Shoulder Score (OSS) at latest follow-up. Kaplan-Meier survivorship analysis was performed with implant revision as the endpoint. Most recently performed radiographs were reviewed for component radiolucent lines (RLLs) and proximal humeral migration.

RESULTS

Five shoulders underwent revision surgery (3.5%); three for rotator cuff failure, one for infection, and one for component malposition. Survivorship of the implant was 95.4% (95% confidence interval 90.1% to 97.9%) at five and nine years. Mean OSS improved significantly compared to preoperative values from 19.0 (1 to 35) to 43.3 (7 to 48) (p < 0.001). Radiological analysis was undertaken for 99 shoulders. This revealed humeral RLLs in one case (1%), glenoid RLLs in 15 cases (15.2%), and radiological rotator cuff failure in 22 cases (22.2%).

CONCLUSION

This prospective cohort study shows encouraging short- to mid-term survivorship and clinical and radiological results for the Mathys Affinis Short, Short Stem Total Shoulder Prosthesis.Level of Evidence: IVCite this article: Bone Jt Open 2021;2(1):58-65.

Humeral stress shielding following cemented endoprosthetic reconstruction: An under-reported complication?

INTRODUCTION

The proximal humerus is a common location for primary and non-primary tumors. Reconstruction of the proximal humerus is commonly performed with an endoprosthesis with low rates of structural failure. The incidence and risk factors for stress shielding are under reported.

METHODS

Thirty-nine (19 male, 20 female) patients underwent resection of the proximal humerus and reconstruction with a cemented modular endoprosthesis between 2000 and 2018. The mean resection length was 12 ± 4 cm and was most commonly performed for metastatic disease (n = 26, 67%).

RESULTS

Stress shielding was observed in 9 (23%) patients at a mean of 29 (6-132) months postoperatively. Patients with stress shielding were noted to have shorter intramedullary stem length (87 vs. 107 mm, p < .001), longer extramedullary implant length (16 vs. 14 cm, p = .01) and a higher extramedullary implant to stem length ratio (2.1 vs. 1.1, p < .001). The incidence of stress shielding was higher (p = .003) in patients reconstructed with 75 mm stem (n = 6, 67%) lengths.

CONCLUSION

Stress shielding of the humerus was associated with the use of shorter stems and long extramedullary implants. The long-term ramifications of stress shielding on implant stability, complications at the time of revision surgery, and overall patient outcomes remain unknown.