Biomechanical evaluation of locked plating fixation for unstable femoral neck fractures

Comparative study of rhBMP-2 assisted femoral neck system and cannulated screws in femoral neck fractures: clinical efficacy and psychological status

This study investigated the clinical efficacy and psychological effects of the femoral neck system (FNS) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) and cannulate compression screw (CCS) in treating unstable femoral neck fractures in young adults. We conducted a retrospective analysis of clinical data from 61 patients with femoral neck fractures who met our selection criteria and were admitted to our hospital between December 2019 and 2022. Patients were divided into two groups based on their internal fixation. Group A received hollow compression screw fixation, whereas Group B underwent FNS combined with rhBMP-2 fixation. We recorded preoperative and last follow-up scores on the self-rating depression scale (SDS) and self-rating anxiety scale (SAS), along with surgery duration, intraoperative fluoroscopy frequency, blood loss, postoperative recovery, and complication rates for both groups. Routine postoperative radiographs were used to evaluate fracture reduction and internal fixation, while Harris scores were used to assess hip joint function. Both groups were followed up for 7-38 months, averaging 25.25 ± 7.62 months. However, intraoperative blood loss was significantly lower in Group A than in Group B, and Group A experienced significantly more fluoroscopy sessions (P < 0.05). In Group A, complications included six cases of nail retraction, three cases of femoral neck shortening, four cases of femoral head necrosis, and one case of bone nonunion. At the last follow-up, femoral neck shortening differed significantly from that in the healthy side (P < 0.05), as did femoral eccentricity (P < 0.05). In Group B, there were three cases of femoral neck shortening, including one nonunion, and four cases of femoral head necrosis. No significant differences in femoral neck shortening were observed compared to the healthy side (P > 0.05), and no significant change was seen in femoral eccentricity from the first to the last follow-up (P > 0.05). Preoperatively, no significant differences in femoral neck shortening and eccentricity were found between the two groups (P > 0.05). Both groups demonstrated good recovery in hip joint function. However, there were significant differences preoperatively and in the last follow-up SDS and SAS scores (P < 0.05). The combination of FNS and rhBMP-2 for treating femoral neck fractures is minimally invasive and easy to perform and offers greater stability. This approach promotes fracture healing with minimal irritation to surrounding muscles and soft tissues, facilitating early weight-bearing and functional rehabilitation. Both surgical methods effectively enhance the psychological well-being of patients with femoral neck fractures who experience anxiety and depression, thereby improving their quality of life and achieving satisfactory short-term therapeutic outcomes.

Biomechanical comparison of locking femoral neck plate versus cannulated screws with or without a medial buttress plate in Pauwels type 3 femoral neck fractures

Objective

The aim of this study was to evaluate whether the locking femoral neck plate (LFNP) can be an alternative fixation method to the cannulated screws with a medial buttress plate. For this purpose, we compared biomechanically the LFNP and cannulated screws with or without a medial buttress plate in Pauwels type 3 femoral neck fractures.

Methods

A vertical fracture model was created at an 80-degree angle to the femoral neck in 28 synthetic bone models. The models were randomly divided into 4 groups, each containing 7 bones each. The bone fracture models were fixed with 3 parallel cannulated screws in group 1, 3 parallel cannulated screws combined with a medial buttress plate in group 2, LFNP in group 3, LFNP combined with a medial buttress plate in group 4. The stability of the specimens was tested biomechanically at a 7° valgus inclination to simulate normal 2-legged weight-bearing through an anatomical femur. The forces corresponding to 0.5 mm, 1 mm, 1.5 mm, and 2 mm displacement and failure loads were calculated in all groups.

Results

The axial load values corresponding to 4 di!erent fracture displacements and the failure load values of the groups were compared, group 1 was significantly weaker (P < .05 for each) while group 4 was significantly stronger (P < .05 for each) compared to the other groups. There was no statistically significant di!erence between group 2 and group 3 (P > .05 for each).

Conclusion

The results of this biomechanical study showed that the LFNP fixation system provided su"cient biomechanical stability for unstable Pauwels type 3 femoral neck fractures. The biomechanical performance of LFNP was similar to that of cannulated screws with medial buttress plate and better than that of cannulated screws alone. This suggests that LFNP can be a promising stable alternative fixation method to cannulated screws with a medial buttress plate in unstable femoral neck fractures.

Impact of lateral cortical notching on biomechanical performance in cephalomedullary nailing for unstable pertrochanteric fractures

PURPOSE

In pertrochanteric femur fractures the risk for fracture healing complications increases with the complexity of the fracture. In addition to dynamization along the lag screw, successful fracture healing may also be facilitated by further dynamization along the shaft axis. The aim of this study was to investigate the mechanical stability of additional axial notch dynamization compared to the standard treatment in an unstable pertrochanteric femur fracture treated with cephalomedullary nailing.

METHODS

In 14 human cadaver femora, an unstable pertrochanteric fracture was stabilized with a cephalomedullary nail. Additional axial notch dynamization was enabled in half of the samples and compared against the standard treatment (n = 7). Interfragmentary motion, axial construct stiffness and load to failure were investigated in a stepwise increasing cyclic load protocol.

RESULTS

Mean load to failure (1414 ± 234 N vs. 1428 ± 149 N, p = 0.89) and mean cycles to failure (197,129 ± 45,087 vs. 191,708 ± 30,490, p = 0.81) were equivalent for axial notch dynamization and standard treatment, respectively. Initial construct stiffness was comparable for both groups (axial notch dynamization 684 [593-775] N/mm, standard treatment 618 [497-740] N/mm, p = 0.44). In six out of seven specimens the additional axial dynamization facilitated interfragmentary compression, while maintaining its mechanical stability. After initial settling of the constructs, there were no statistically significant differences between the groups for either subsidence or rotation of the femoral head fragment (p ≤ 0.30).

CONCLUSION

Axial notch dynamization provided equivalent mechanical stability compared to standard treatment in an unstable pertrochanteric fracture. Whether the interfragmentary compression generated by axial notch dynamization will promote fracture healing through improved fracture reduction needs to be evaluated clinically.

Biomechanical evaluation of Gamma 3 nail with anti-rotation screw fixation for unstable femoral neck fractures: a biomechanical study

This study aims to evaluate the biomechanical performance of the Gamma 3 nail with an anti-rotation screw (GNS) and compare it to two established gold-standard methods for treating unstable femoral neck fractures (UFNFs). Synthetic bone models were prepared with Pauwels' type III osteotomy and an additional posterior wedge. Three different implant configurations were tested: three cannulated crews (3CS) in an inverted triangle configuration, a dynamic hip screw with an anti-rotation screw (DHSS), and GNS. Non-destructive cyclic axial loading was applied at 7° adduction, with 1000 cycles ranging from 100 to 1000 N. Subsequently, a construct failure test was conducted using progressive axial compression, and fracture reduction loss was recorded. The average axial stiffness was 321 ± 52 N/mm for 3CS, 430 ± 71 N/mm for DHSS, and 519 ± 104 N/mm for GNS. The average ultimate failure loads were 2699.3 N for 3CS, 3427.1 N for DHSS, and 3758.9 N for GNS. GNS demonstrated significantly greater axial stiffness compared to the other two groups (P < 0.05). Both DHSS and GNS exhibited similar failure loading, which were greater than those of 3CS (P < 0.05). GNS offers the advantages of a minimally invasive and intramedullary implant with comparable stability to the DHSS system. Moreover, GNS demonstrated superior biomechanical performance compared to 3 CS configuration.

Femoral neck fractures in non-geriatric patients: femoral neck system versus cannulated cancellous screw

BACKGROUND

The fractures of femoral neck account for 50% among hip fractures with around 3%-10% occurring in younger population of below 65 years. The newly introduced FNS as management approach appears to be a potential alternative to the traditional CCS. The aim of this study was to compare the clinical efficacy and outcome of the femoral neck system (FNS) and the cannulated cancellous screw (CCS) in the treatment of femoral neck fractures in adult below 65 years of age.

METHODS

Data of 114 patients between 18-65 years, admitted in our department for femoral neck fracture from January 2019 to March 2021 were retrospectively studied and ranged into two groups based on the surgical methods: FNS group (56 patients) and CCS group (58 patients). The variables of interest including demographic and clinical variables (age, gender, fracture mechanism, injury side and classification), perioperative parameters(operation time, intraoperative bleeding, incision length and hospitalization time), postoperative outcomes and complications (fracture healing time, nonunion rate, femoral neck avascular necrosis, aseptic screw loosening and the Harris Hip Score), were analyzed and compared between the two groups.

RESULTS

All 114 patients presented satisfactory reduction and were followed-up for a period of 12 to 36 months (mean 27 ± 2.07 months); there were no significant differences between both groups in terms of age, gender, fracture classification, side of injury, mechanism of injury, the operative time, intraoperative blood loss and the hospital length of stay. However, the fracture healing time between FNS group and CCS group was statistically significant (p < 0.05), respectively 2.86 ± 0.77 and 5.10 ± 0.81 months. The significant differences were also found in terms of numbers of fluoroscopies 8.34 ± 1.38 Vs 17.72 ± 2.19, the HHS 87.80 ± 1.92 Vs 84.28 ± 2.24, postoperative complications 8 (14.28%) Vs 26 (44.82) respectively in FNS and CCS group.

CONCLUSION

FNS presented satisfactory outcomes had significantly lower complications rate, therefore, can be one of the alternatives for internal implantation devices in treatment of femoral neck fracture in non-geriatric population.

Reconstruction of massive bone defects after femoral tumor resection using two new-designed 3D-printed intercalary prostheses: a clinical analytic study with the cooperative utilization of multiple technologies

BACKGROUND

To reconstruct massive bone defects of the femoral diaphysis and proximal end with limited bilateral cortical bone after joint-preserving musculoskeletal tumor resections, two novel 3D-printed customized intercalary femoral prostheses were applied.

METHODS

A series of nine patients with malignancies who received these novel 3D-printed prostheses were retrospectively studied between July 2018 and November 2021. The proximal and diaphyseal femur was divided into three regions of interest (ROIs) according to anatomic landmarks, and anatomic measurements were conducted on 50 computed tomography images showing normal femurs. Based on the individual implant-involved ROIs, osteotomy level, and anatomical and biomechanical features, two alternative 3D-printed prostheses were designed. In each patient, Hounsfield Unit (HU) value thresholding and finite element analysis were conducted to identify the bone trabecula and calcar femorale and to determine the stress distribution, respectively. We described the characteristics of each prosthesis and surgical procedure and recorded the intraoperative data. All patients underwent regular postoperative follow-up, in which the clinical, functional and radiographical outcomes were evaluated.

RESULTS

With the ROI division and radiographic measurements, insufficient bilateral cortical bones for anchoring the traditional stem were verified in the normal proximal femur. Therefore, two 3D-printed intercalary endoprostheses, a Type A prosthesis with a proximal curved stem and a Type B prosthesis with a proximal anchorage-slot and corresponding locking screws, were designed. Based on HU value thresholding and finite element analysis, the 3D-printed proximal stems in all prostheses maximally preserved the trabecular bone and calcar femorale and optimized the biomechanical distribution, as did the proximal screws. With the 3D-printed osteotomy guide plates and reaming guide plates, all patients underwent the operation uneventfully with a satisfactory duration (325.00 ± 62.60 min) and bleeding volume (922.22 ± 222.36 ml). In the follow-up, Harris Hip and Musculoskeletal Tumor Society scores were ameliorated after surgery (P < 0.001 and P < 0.001, respectively), reliable bone ingrowth was observed, and no major complications occurred.

CONCLUSIONS

Two novel 3D-printed femoral intercalary prostheses, which achieved acceptable overall postoperative outcomes, were used as appropriate alternatives for oncologic patients with massive bone defects and limited residual bone and increased the opportunities for joint-preserving tumor resection. Several scientific methodologies utilized in this study may promote the clinical design proposals of 3D-printed implants.

Reoperation rate and implants’ position variation features of displaced femoral neck fractures with sliding compression or length-stable fixation in young and middle-aged population

Introduction

Sliding compression fixation and length-stable fixation are two basic internal fixation concepts in the treatment of displaced femoral neck fractures. In this study, we aimed to compare the reoperation rates for different methodologies of internal fixation for femoral neck fractures in young and middle-aged population.

Materials and methods

This a retrospective study. A total of 215 patients with displaced femoral neck fractures treated with cannulated screw fixation were enrolled and divided into the sliding compression and length-stable groups according to the fixation pattern. The occurrence of and reason for revision surgery within one year were recorded. Forty-five patients with complete CT data (including CT scanning on the first postoperative day and at the last follow up) were selected from the total sample. A newly established computerized image processing method was used to evaluate variations in the spatial location of screws.

Results

The reoperation rate was significantly higher in the length-stable group (23.8%) than in the sliding compression group (7.3%). The rate of revision surgery due to nonunion was also higher in the length-stable group (11.4%) than in the sliding compression group (1.8%). However, no significant difference was observed in terms of joint penetration or soft tissue irritation. The sliding compression group (6.58 ± 3.18 mm) showed higher femoral neck shortening than length-stable group (4.16 ± 3.65 mm). When analyzing the spatial variations, a significantly greater screw withdrawal distance was observed in the sliding compression group than in the length-stable group, but with a smaller rotation angle.

Conclusion

Length-stable internal fixation of displaced femoral neck fractures may lead to an increased reoperation rate in young and middle-aged population.

Trial registration

Name of the registry: Chinese Clinical Trial Registry.

Trial registration number: ChiCTR2000032327.

Trial registration date: 2020–4-26.

Internal Fixation of Garden Type III Femoral Neck Fractures with Sliding Hip Screw and Anti-Rotation Screw: Does Increased Valgus Improve Healing?

Background and Objectives: The aim of this study was to compare the effect of valgus versus anatomic reduction on internal fixation of Garden type III femoral neck fractures using the sliding hip screw (SHS) and anti-rotation screw (ARS) regarding the radiographic and therapeutic outcome. Patients and Methods: A retrospective case-controlled study was performed in a level I trauma center. All patients between 2006 and 2020 aged younger than 70 years with a Garden type III femoral neck fracture and a Kellgren-Lawrence score under grade III stabilized using SHS and ARS were identified. One-hundred and nine patients were included, with a group distribution of sixty-eight patients in group A (anatomic reduction) and forty-one patients in group B (valgus reduction). Results: Mean age was 55 years, and the mean Kellgren-Lawrence score was 1 in both groups. Mean femoral neck angle was 130.5 ± 3.8° in group A and 142.8 ± 4.3° in group B (p = 0.001), with an over-correction of 12° in group B. Tip-apex distance was 10.0 ± 2.8 mm in group A versus 9.3 ± 2.8 mm in group B (p = 0.89). Healing time was 9 weeks in group A compared to 12 weeks in group B (p = 0.001). Failure rate was 4.4% in group A and 17.1% in group B (p = 0.027). Conclusions: Anatomic reduction of Garden type III femoral neck fractures in patients younger than 70 years treated using SHS and ARS resulted in significantly lower failure rates and shorter healing times than after valgus reduction. Therefore, it can be recommended to achieve anatomic reduction.

Biomechanical and clinical evaluation of interlocking hip screw in Pauwels Ⅲ femoral neck fractures: A comparison with inverted triangle cannulated screws

Purpose: To compare biomechanical and clinical properties of the novel internal fixation Interlocking Hip Screw (IHS) and conventional inverted triangle cannulated screws (ITCS) for treatment of Pauwels Ⅲ femoral neck fractures. Methods: Twenty synthetic femurs were osteotomized to simulate 70° Pauwels Ⅲ femoral neck fractures and randomly divided into two groups: Group IHS and Group ITCS. Specimens were loaded in quasi-static ramped and cyclical compression testing in 25° adduction to analyze for axial stiffness, failure load, and interfragmentary displacement. 21 matched patients with Pauwels Ⅲ femoral neck fracture who received closed reduction and internal fixation from January 2020 to January 2021 in both Group IHS and Group ITCS. Demographic data, time to surgery, operating duration, intraoperative blood loss, number of fluoroscopies, length of hospital stay, fracture healing time, Harris Hip Score (HHS), the score of Visual Analogue Scale (VAS) and complications such as nonunion, avascular necrosis, and femoral neck shortening were compared. Results: All specimens in the two groups survived in the axial and cyclical compression test. The axial stiffness was significantly higher for Group IHS (277.80 ± 26.58 N/mm) versus Group ITCS (205.33 ± 10.46 N/mm), p < 0.05. The maximum failure loading in Group IHS performed significantly higher than in Group ITCS (1,400.48 ± 71.60 N versus 996.76 ± 49.73 N, p < 0.05). The interfragmentary displacement of the cyclic loading test for Groups IHS and Group ITCS was 1.15 ± 0.11 mm and 1.89 ± 0.14 mm, respectively, p < 0.05. No significant difference was found in terms of demographic data, time to surgery, intraoperative blood loss, length of hospital stay and the occurrence of nonunion and avascular necrosis between groups. Shorter operating duration and fewer intraoperative fluoroscopic views were noticed using IHS compare to ITCS, p < 0.05. The HHS was 72.14 ± 5.76 and 86.62 ± 5.01 in Group IHS, and was 67.29 ± 5.27 and 81.76 ± 5.13 in Group ITCS at 3-month and 6-month follow-up, respectively, p < 0.05. The magnitude of femoral neck shortening was significantly lower in Group IHS compared to Group ITCS (4.80 ± 1.03 mm versus 5.56 ± 1.21 mm, p < 0.05). Conclusion: Our study demonstrated that IHS provided better biomechanical and clinical performance due to its unique biological and biomechanical mechanisms, compared with ITCS. Thus, IHS is a feasible alternative to ITCS for the fixation of Pauwels Ⅲ femoral neck fractures.

[Research progress in biomechanics of common internal fixation for femoral neck fracture]

OBJECTIVE

To summarize the characteristics and biomechanical research progress of common internal fixation for femoral neck fractures in recent years, so as to provide reference to clinical treatment of femoral neck fracture.

METHODS

The domestic and foreign relevant literature on biomechanics of internal fixation of femoral neck fracture in recent years was reviewed, and the biomechanical research progress was summarized.

RESULTS

Among the internal fixations currently used in the treatment of femoral neck fractures, three cannulated screws can provide sliding compression at the end of the fracture, but the shear resistance is weak, and the risk of long-term internal fixation failure is high; dynamic hip screw and proximal femoral locking plate have excellent angle stability and overall strength; medial buttress plate can transform vertical shear force into compressive stress to promote fracture healing and produce a certain anti-rotation effect; femoral neck system can support the fracture in multi-axial direction, with excellent anti-rotation and anti-shortening properties; and cephalomedullary nails have high overall strength and failure load. Different internal fixations have their own indications due to differences in structure and biomechanics.

CONCLUSION

At present, there is no detailed standard guidance of internal fixation selection. Clinically, the appropriate treatment should be selected according to the fracture types of patients.

Mechanical effects of surgical variations in the femoral neck system on Pauwels type III femoral neck fracture : a finite element analysis

AIMS

In this study, we aimed to explore surgical variations in the Femoral Neck System (FNS) used for stable fixation of Pauwels type III femoral neck fractures.

METHODS

Finite element models were established with surgical variations in the distance between the implant tip and subchondral bone, the gap between the plate and lateral femoral cortex, and inferior implant positioning. The models were subjected to physiological load.

RESULTS

Under a load of single-leg stance, Pauwels type III femoral neck fractures fixed with 10 mm shorter bolts revealed a 7% increase of the interfragmentary gap. The interfragmentary sliding, compressive, and shear stress remained similar to models with bolt tips positioned close to the subchondral bone. Inferior positioning of FNS provided a similar interfragmentary distance, but with 6% increase of the interfragmentary sliding distance compared to central positioning of bolts. Inferior positioning resulted in a one-third increase in interfragmentary compressive and shear stress. A 5 mm gap placed between the diaphysis and plate provided stability comparable to standard fixation, with a 7% decrease of interfragmentary gap and sliding distance, but similar compressive and shear stress.

CONCLUSION

Finite element analysis with FNS on Pauwels type III femoral neck fractures revealed that placement of the bolt tip close to subchondral bone provides increased stability. Inferior positioning of FNS bolt increased interfragmentary sliding distance, compressive, and shear stress. The comparable stability of the fixation model with the standard model suggests that a 5 mm gap placed between the plate and diaphysis could viably adjust the depth of the bolt. Cite this article: Bone Joint Res 2022;11(2):102-111.

The Effect of Vertical and Oblique Inclinations on Fracture Stability and Reoperation Risks in Femoral-Neck Fractures of Nongeriatric Patient

Background: For nongeriatric patients with femoral neck fractures (FNFs), preoperative evaluation of fracture three-dimensional inclination is essential to identify fracture stability, select appropriate fixation strategies, and improved clinical prognoses. However, there is lack of evaluation system which takes into account both vertical and oblique inclinations. The purpose of this study was to comprehensively investigate the effect of vertical and oblique inclinations on fracture stability and reoperation risks.

Methods: We retrospectively reviewed the medical records of 755 FNFs patients with over 2 years follow-up. The 3-D inclination angle in vertical (α) and oblique plane (β) were measured based on CT images. The optimal threshold for unstable 3-D inclination were identified by seeking the highest Youden Index in predicting reoperation and validated in the biomechanical test. According to the cut-off value proposed in the diagnostic analysis, forty-two bone models were divided into seven groups, and were all fixed with traditional three parallel screws. Interfragmentary motion (IFM) was used for comparison among seven groups. The association between reoperation outcome and 3-D inclination was analysed with a multivariate model.

Results and Conclusion: The overall reoperation rate was 13.2%. Unstable 3-D inclination angles with an optimally determined Youden index (0.39) included vertical (α > 70°) and oblique (50°<α < 70° and β > 20°/β < −20°) types. Biomechanical validation showed these fractures had significantly greater (p < 0.05) interfragmentary motion (1.374–2.387 mm vs. 0.330–0.681 mm). The reoperation rate in 3-D unstable group (32.7%) is significantly (p < 0.001) higher than that in 3-D stable group (7.9%). Multivariate analysis demonstrated that 3-D inclination angle was significantly (OR = 4.699, p < 0.001) associated with reoperation. FNFs with α > 70°; 50°<α < 70° and β > 20°/β < −20° are real unstable types with significantly worse interfragmentary stability and higher reoperation risks. Fracture inclination in vertical and oblique planes is closely related to reoperation outcomes and may be a useful complement to the way FNFs are currently evaluated.

[Comparison of femoral neck system and inverted triangle cannulated screws fixations in treatment of Pauwels typle femoral neck fractures]

Objective

To compare the effectiveness of the femoral neck system (FNS) and inverted triangle cannulated screws (ITCS) for the treatment of Pauwels type Ⅲ femoral neck fractures.

Methods

The clinical data of 59 patients with Pauwels type Ⅲ femoral neck fractures treated between May 2019 and November 2020 were retrospectively analysed. The patients were divided into FNS group (28 cases) and ITCS group (31 cases) according to the different internal fixation. There was no significant difference in gender, age, affected side, body mass index, cause of injury, smoking history, alcohol abuse history, Pauwels angle, Garden classification, AO/Orthopaedic Trauma Association (AO/OTA) classification, and time from injury to operation between the two groups ( P>0.05). The operation time, incision length, intraoperative blood loss, extra assisted reduction procedures (Kirschner wire prying reduction or open reduction), hospitalization stay, and early complications were recorded and compared between the two groups. Garden index and Haidukewych score were used to evaluate fracture reduction. Fracture healing time, lateral thigh irritation, time of partial or total weight-bearing postoperatively, shortening length and degree of femoral neck, change of caput-collum-diaphysis (CCD) angle (the difference of CCD angle between immediate after operation and last follow-up), incidence of osteonecrosis of femoral head and revision surgery were recorded and compared between the two groups. Hip joint function were evaluated by Harris score.

Results

The operation time of FNS group was significantly shorter than ITCS group, and the incision length was significantly longer than ITCS group ( P<0.05). There was no significant difference in intraoperative blood loss, assisted reduction, Garden index, Haidukewych score, and hospitalization stay between the two groups ( P>0.05). All the incisions healed by first intention. There were 2 deep vein thrombosis in the FNS group and 1 pulmonary infection and 1 deep vein thrombosis in the ITCS group. No significant difference was found in the incidence of early postoperative complications (7.1% vs. 6.5%) between the two groups ( P=1.000). Patients in both groups were followed up 3-14 months, and there was no significant difference in follow-up time between the two groups ( t=-0.553, P=0.582). The fracture healing time, Harris score, and the partial weight-bearing time after operation of the FNS group were significantly better than those of the ITCS group ( P<0.05). However, there was no significant difference in total weight-bearing time between the two groups ( Z=-1.298, P=0.194). No lateral thigh irritation was found in the FNS group, while 10 patients in the ITCS group had lateral thigh irritation, and the incidence between the two groups (0 vs. 32.3%) was significant ( P=0.001). At last follow-up, the shortening length and degree of femoral neck and the change of CCD angle in FNS group were significantly less than those in ITCS group ( P<0.05). There was no patient with osteonecrosis of femoral head or reoperation in the FNS group, while 4 patients in the ITCS group underwent reoperation (including 2 cases of osteonecrosis of the femoral head). However, the incidences (0 vs. 6.5%; 0 vs.12.9%) between the two groups were not significant ( P=0.493; P=0.114).

Conclusion

Using FNS to treat Pauwels type Ⅲ femoral neck fracture is simple as well as able to reduce the shortening of the femoral neck and the change of the CCD angle. Also, FNS is conducive to the recovery of hip joint function, which should be considered as a new choice for the treatment of young femoral neck fracture patients.