Tomographic diffractive microscopy and multiview profilometry with flexible aberration correction

Recent Advances and Current Trends in Transmission Tomographic Diffraction Microscopy

Optical microscopy techniques are among the most used methods in biomedical sample characterization. In their more advanced realization, optical microscopes demonstrate resolution down to the nanometric scale. These methods rely on the use of fluorescent sample labeling in order to break the diffraction limit. However, fluorescent molecules' phototoxicity or photobleaching is not always compatible with the investigated samples. To overcome this limitation, quantitative phase imaging techniques have been proposed. Among these, holographic imaging has demonstrated its ability to image living microscopic samples without staining. However, for a 3D assessment of samples, tomographic acquisitions are needed. Tomographic Diffraction Microscopy (TDM) combines holographic acquisitions with tomographic reconstructions. Relying on a 3D synthetic aperture process, TDM allows for 3D quantitative measurements of the complex refractive index of the investigated sample. Since its initial proposition by Emil Wolf in 1969, the concept of TDM has found a lot of applications and has become one of the hot topics in biomedical imaging. This review focuses on recent achievements in TDM development. Current trends and perspectives of the technique are also discussed.

Jones tomographic diffractive microscopy with a polarized array sensor

Tomographic diffractive microscopy (TDM) based on scalar light-field approximation is widely implemented. Samples exhibiting anisotropic structures, however, necessitate accounting for the vectorial nature of light, leading to 3-D quantitative polarimetric imaging. In this work, we have developed a high-numerical aperture (at both illumination and detection) Jones TDM system, with detection multiplexing via a polarized array sensor (PAS), for imaging optically birefringent samples at high resolution. The method is first studied through image simulations. To validate our setup, an experiment using a sample containing both birefringent and non-birefringent objects is performed. Araneus diadematus spider silk fiber and Pinna nobilis oyster shell crystals are finally studied, allowing us to assess both birefringence and fast-axis orientation maps.

Multimodal image reconstruction from tomographic diffraction microscopy data

Tomographic Diffraction Microscopy (TDM) is a tool of choice for high-resolution, marker-less 3D imaging of biological samples. Based on a generalization of Digital Holographic Microscopy (DHM) with full control of the sample's illumination, TDM measures, from many illumination directions, the diffracted fields in both phase and amplitude. Photon budget associated to TDM imaging is low. Therefore, TDM is not limited by photo-toxicity issues. The recorded information makes it possible to reconstruct 3D refractive index distribution (with both refraction and absorption contributions) of the object under scrutiny, without any staining. In this contribution, we show an alternate use of this information. A tutorial for multimodal image reconstruction is proposed. Both intensity contrasts and phase contrasts are proposed, from the image formation model to the final reconstruction with both 2D and 3D rendering, turning TDM into a kind of "universal" digital microscope. This article is protected by copyright. All rights reserved.

Study of the Off-Axis Fresnel Zone Plate of a Microscopic Tomographic Aberration

A tomographic microscopy system can achieve instantaneous three-dimensional imaging, and this type of microscopy system has been widely used in the study of biological samples; however, existing chromatographic microscopes based on off-axis Fresnel zone plates have degraded image quality due to geometric aberrations such as spherical aberration, coma aberration, and image scattering. This issue hinders the further development of chromatographic microscopy systems. In this paper, we propose a method for the design of an off-axis Fresnel zone plate with the elimination of aberrations based on double exposure point holographic surface interference. The aberration coefficient model of the optical path function was used to solve the optimal recording parameters, and the principle of the aberration elimination tomography microscopic optical path was verified. The simulation and experimental verification were carried out utilizing a Seidel coefficient, average gradient, and signal-to-noise ratio. First, the aberration coefficient model of the optical path function was used to solve the optimal recording parameters. Then, the laminar mi-coroscopy optical system was constructed for the verification of the principle. Finally, the simulation calculation results and the experimental results were verified by comparing the Seidel coefficient, average gradient, and signal-to-noise ratio of the microscopic optical system before and after the aberration elimination. The results show that for the diffractive light at the orders 0 and ±1, the spherical aberration W040 decreases by 62–70%, the coma aberration W131 decreases by 96–98%, the image dispersion W222 decreases by 71–82%, and the field curvature W220 decreases by 96–96%, the average gradient increases by 2.8%, and the signal-to-noise ratio increases by 18%.

Optimizing sample illumination scanning in transmission tomographic diffractive microscopy

Due to the sequential nature of data acquisition, it is preferable to limit the number of illuminations to be used in tomographic diffractive microscopy experiments, especially if fast imaging is foreseen. On the other hand, for high-quality, high-resolution imaging, the Fourier space has to be optimally filled. Up to now, the problem of optimal Fourier space filling has not been investigated in itself. In this paper, we perform a comparative study to analyze the effect of sample scanning patterns on Fourier space filling for a transmission setup. Optical transfer functions for several illumination patterns are studied. Simulation as well as experiments are conducted to compare associated image reconstructions. We found that 3D uniform angular sweeping best fills the Fourier space, leading to better quality images.

Three-dimensional imaging with reflection synthetic confocal microscopy

Biomedical imaging lacks label-free microscopy techniques able to reconstruct the contour of biological cells in solution, in 3D and with high resolution, as required for the fast diagnosis of numerous diseases. Inspired by computational optical coherence tomography techniques, we present a tomographic diffractive microscope in reflection geometry used as a synthetic confocal microscope, compatible with this goal and validated with the 3D reconstruction of a human effector T lymphocyte.

Versatile transmission/reflection tomographic diffractive microscopy approach

Tomographic diffractive microscopy (TDM) has gained interest in recent years due to its ability to deliver high-resolution, three-dimensional images of unlabeled samples. It has been applied to transparent samples in transmission mode, as well as to surface studies in reflection mode. Mudry et al. [Opt. Lett.35, 1857 (2010)OPLEDP0146-959210.1364/OL.35.001857] introduced the concept of mirror-assisted TDM (MA-TDM), an elegant approach for achieving quasi-isotropic-resolution microscopic imaging, but which is still to be experimentally applied. In this work, we show that a simplified version of MA-TDM allows for transforming a reflective TDM setup into a more versatile instrument, also capable of observing transparent samples in transmission mode if using specific sample holders made out of a mirror and coated with a low-thickness transparent spacer.

Quantitative phase imaging of cells in a flow cytometry arrangement utilizing Michelson interferometer-based off-axis digital holographic microscopy

We combined Michelson-interferometer-based off-axis digital holographic microscopy (DHM) with a common flow cytometry (FCM) arrangement. Utilizing object recognition procedures and holographic autofocusing during the numerical reconstruction of the acquired off-axis holograms, sharply focused quantitative phase images of suspended cells in flow were retrieved without labeling, from which biophysical cellular features of distinct cells, such as cell radius, refractive index and dry mass, can be subsequently retrieved in an automated manner. The performance of the proposed concept was first characterized by investigations on microspheres that were utilized as test standards. Then, we analyzed two types of pancreatic tumor cells with different morphology to further verify the applicability of the proposed method for quantitative live cell imaging. The retrieved biophysical datasets from cells in flow are found in good agreement with results from comparative investigations with previously developed DHM methods under static conditions, which demonstrates the effectiveness and reliability of our approach. Our results contribute to the establishment of DHM in imaging FCM and prospect to broaden the application spectrum of FCM by providing complementary quantitative imaging as well as additional biophysical cell parameters which are not accessible in current high-throughput FCM measurements.

Multi-wavelength multi-angle reflection tomography

We have developed a reflection tomographic microscope in which the sample is reconstructed from different holograms recorded under various angles and wavelengths of incidence. We present an iterative inversion algorithm based on a rigorous modeling of the wave-sample interaction that processes all the data simultaneously to estimate the sample permittivity distribution. We show that using several wavelengths permits a significant improvement of the reconstruction, especially along the optical axis.

Microsphere-assisted phase-shifting profilometry

In the present work, we have investigated the combination of a superresolution microsphere-assisted 2D imaging technique with low-coherence phase-shifting interference microscopy. The imaging performance of this technique is studied by numerical simulation in terms of the magnification and the lateral resolution as a function of the geometrical and optical parameters. The results of simulations are compared with the experimental measurements of reference gratings using a Linnik interference configuration. Additional measurements are also shown on nanostructures. An improvement by a factor of 4.7 in the lateral resolution is demonstrated in air, thus giving a more isotropic nanometric resolution for full-field surface profilometry in the far field.

Optically driven full-angle sample rotation for tomographic imaging in digital holographic microscopy

This study presents a novel tomographic imaging technique for living biomedical samples using an optically driven full-angle rotation scheme based on digital holographic microscopy, in which the three-dimensional refractive index distribution inside the sample can be measured and analyzed. To accomplish the full-angle sample rotation, two optical traps are driven by highly focused spots on the top and bottom of the sample. The rim image of the sample outside the focal depth at the different rotation angles and propagation distances can be corrected and compensated, respectively, via numerical focusing; therefore, tomographic imaging of the sample can be conducted. The proposed approach shows that an entire symmetric spectrum can be acquired for tomographic reconstruction without the missing apple core problem as in traditional sample-rotation schemes. The three-dimensional refractive index of living yeast in a fluid medium is measured and verified.

Microtomography imaging of an isolated plant fiber: a digital holographic approach

This paper describes a method for optical projection tomography for the 3D in situ characterization of micrometric plant fibers. The proposed approach is based on digital holographic microscopy, the holographic capability being convenient to compensate for the runout of the fiber during rotations. The setup requires a telecentric alignment to prevent from the changes in the optical magnification, and calibration results show the very good experimental adjustment. Amplitude images are obtained from the set of recorded and digitally processed holograms. Refocusing of blurred images and correction of both runout and jitter are carried out to get appropriate amplitude images. The 3D data related to the plant fiber are computed from the set of images using a dedicated numerical processing. Experimental results exhibit the internal and external shapes of the plant fiber. These experimental results constitute the first attempt to obtain 3D data of flax fiber, about 12  μm×17  μm in apparent diameter, with a full-field optical tomography approach using light in the visible range.

Emerging optical nanoscopy techniques

To face the challenges of modern health care, new imaging techniques with subcellular resolution or detection over wide fields are required. Far field optical nanoscopy presents many new solutions, providing high resolution or detection at high speed. We present a new classification scheme to help appreciate the growing number of optical nanoscopy techniques. We underline an important distinction between superresolution techniques that provide improved resolving power and nanodetection techniques for characterizing unresolved nanostructures. Some of the emerging techniques within these two categories are highlighted with applications in biophysics and medicine. Recent techniques employing wider angle imaging by digital holography and scattering lens microscopy allow superresolution to be achieved for subcellular and even in vivo, imaging without labeling. Nanodetection techniques are divided into four subcategories using contrast, phase, deconvolution, and nanomarkers. Contrast enhancement is illustrated by means of a polarized light-based technique and with strobed phase-contrast microscopy to reveal nanostructures. Very high sensitivity phase measurement using interference microscopy is shown to provide nanometric surface roughness measurement or to reveal internal nanometric structures. Finally, the use of nanomarkers is illustrated with stochastic fluorescence microscopy for mapping intracellular structures. We also present some of the future perspectives of optical nanoscopy.

Enhanced quantitative phase imaging in self-interference digital holographic microscopy using an electrically focus tunable lens

Self-interference digital holographic microscopy (DHM) has been found particular suitable for simplified quantitative phase imaging of living cells. However, a main drawback of the self-interference DHM principle are scattering patterns that are induced by the coherent nature of the laser light which affect the resolution for detection of optical path length changes. We present a simple and efficient technique for the reduction of coherent disturbances in quantitative phase images. Therefore, amplitude and phase of the sample illumination are modulated by an electrically focus tunable lens. The proposed method is in particular convenient with the self-interference DHM concept. Results from the characterization of the method show that a reduction of coherence induced disturbances up to 70 percent can be achieved. Finally, the performance for enhanced quantitative imaging of living cells is demonstrated.