Non-spherical gold nanoparticles trapped in optical tweezers: shape matters

Nanojet visualization and dark-field imaging of optically trapped vaterite capsules with endoscopic illumination

Optical responsivity grants biomedical capsules additional capabilities, promoting them towards multifunctional theragnostic nanodevices. In this endeavor, screening candidates under conditions that closely resemble in situ environments is crucial for both the initial optimization and the subsequent inspection stages of development and operation. Optical tweezers equipped with dark-field spectroscopy are among the preferable tools for nanoparticle imaging and refractometry. However, the effectiveness of conventional illumination and light collection arrangements for inspecting anisotropic complex inner composition particles is quite limited due to reduced collection angles, which can result in the omission of features in scattering diagrams. Here we introduce an endoscopic dark-field illumination scheme, where light is launched on an optically trapped particle from a single-mode fiber, immersed into a fluid cell. This arrangement disentangles illumination and collection paths, thus allowing the collection of scattered light with a very high numerical aperture. This methodology is applied to vaterite capsules, which are known to possess strong anisotropic responses. Tweezer configuration allows revealing optical properties for different crystallographic orientations of vaterite, which is complex to do otherwise. Furthermore, endoscopic dark-field images reveal the emergence of polarization-dependent long-range photonic nanojets, which are capable of interacting with nearby particles, demonstrating a new pathway for nanojet image formation.

A hybrid dielectrophoretic trap-optical tweezers platform for manipulating microparticles in aqueous suspension

We demonstrate that a set of microfabricated electrodes can be coupled to a commercial optical tweezers device, implementing a hybrid electro-optical platform with multiple functionalities for the manipulation of micro-/nanoparticles in suspension. We show that the hybrid scheme allows enhanced manipulation capabilities, including hybrid dynamics, controlled accumulation in the dielectrophoretic trap from the optical tweezers, selectivity, and video tracking of the individual trajectories of trapped particles. This creates opportunities for novel studies in statistical physics and stochastic thermodynamics with multi-particle systems, previously limited to investigations with individual particles.

Metal Nanoparticles Produced Using Autotrophs and Their Bioproducts: A Comparative Overview between Photosynthesizing Taxonomic Groups

Metal nanoparticles (MNPs) exhibit unique properties influenced by their size, shape, and dispersion uniformity. They can be synthesized via chemical methods or green synthesis, commonly using plant or microorganism extracts as reducing and stabilizing agents. This eco-friendly approach is valued, but the literature is unclear about which taxonomic groups should be targeted to obtain certain types of MNPs. Given the ongoing growth of research in this area, this study offers a comparative overview that helps identify patterns and gaps in the current knowledge. This study reviewed 485 articles, describing 652 monometallic and 10 bimetallic nanoparticles synthesized using photosynthesizing organisms' extracts. Angiosperms and cyanobacteria were the most utilized groups. Silver and gold nanoparticles were the most studied MNPs. Gold nanoparticles' size varied with taxonomic groups, but they were smaller than the silver nanoparticles synthesized by the same group. Antimicrobial activity was the most common application, highlighting the potential of green-synthesized MNPs. This study provides valuable insights for optimizing sustainable nanoparticle production since knowledge about the specificities of different photosynthesizing taxa can be useful for directing efforts and enhancing the efficiency and precision of green-synthesized MNPs.

Modular Assembly of Metamaterials Using Light Gradients

This is a report on a pilot study that tests the feasibility of assembling photonic metamaterials (PMs) using light gradient forces. Following a strategy that works like modular construction, light gradient forces, produced by a tightly focused, 1D standing wave optical trap, time-multiplexed across a 2D lattice are used to assemble voxels consisting of prefabricated, monodispersed nanoparticles (NPs) with radii ranging from 30 to 500 nm into 3D structures on a hydrogel scaffold. Hundreds of NPs can be manipulated concurrently into a complex heterogeneous voxel this way, and then the process can be repeated by stitching together voxels to form a metamaterial of any size, shape, and constituency although imperfectly. Imperfections introduce random phase shifts and amplitude variations that can have an adverse effect on the band structure. Regardless, PMs are created this way using two different dielectric NPs, polystyrene and rutile, and then the near-infrared performance for each is analyzed with angle-, wavelength-, and polarization-dependent reflection spectroscopy. The cross-polarized spectra show evidence of a resonance peak. Interestingly, whereas the line shape from the polystyrene array is symmetric, the rutile array is not, which may be indicative of Fano resonance. So, even with the structural defects, reflection spectroscopy reveals a resonance.

Focusing property of autofocusing Bessel beams

We introduce what we believe to be a new family of abruptly autofocusing waves named autofocusing Bessel beams (ABBs). Since the beams only strongly influence the area near the focus, it holds promise for medical laser treatment and optical tweezers. By the angular spectrum method, ABBs are proved to be a class solution for the Helmholtz equation. The focal length is well-defined and easily tuned in our mathematical description. Under the finite energy limitation, the abruptly autofocusing and vortex characteristics of Gaussian-modulated ABBs are studied. Interestingly, we found a kind of abruptly autofocusing waves focusing twice on the propagation axis, which is formed by an ABB passing through a focusing lens. Dual-focus ABBs make it possible for a single laser to manipulate two particles on the propagation axis simultaneously. In the experiment, the autofocusing of ABBs and the dual focus of ABBs passing through a focusing lens are observed. This article provides a theoretical model and experimental protocol for studying abruptly autofocusing waves.

Evanescent field trapping and propulsion of Janus particles along optical nanofibers

Small composite objects, known as Janus particles, drive sustained scientific interest primarily targeted at biomedical applications, where such objects act as micro- or nanoscale actuators, carriers, or imaging agents. A major practical challenge is to develop effective methods for the manipulation of Janus particles. The available long-range methods mostly rely on chemical reactions or thermal gradients, therefore having limited precision and strong dependency on the content and properties of the carrier fluid. To tackle these limitations, we propose the manipulation of Janus particles (here, silica microspheres half-coated with gold) by optical forces in the evanescent field of an optical nanofiber. We find that Janus particles exhibit strong transverse localization on the nanofiber and much faster propulsion compared to all-dielectric particles of the same size. These results establish the effectiveness of near-field geometries for optical manipulation of composite particles, where new waveguide-based or plasmonic solutions could be envisaged.

Optically trapped SiO2@Au particle-dye hybrid-based SERS detection of Hg2+ ions

The selective ultra-sensitive detection of a very low concentration of analyte in a liquid environment using surface-enhanced Raman spectroscopy (SERS) is a challenging task owing to the poor reproducibility of the Raman signals arising from the nonstationary nature of the substrate. However, plasmonic metal particle-incorporated microparticles can be effectively 3-D arrested in a liquid environment that can serve as a stable SERS substrate by employing an optical trapping force. Herein, we demonstrate a 3-D optically trapped Au-attached SiO₂ microparticle as an efficient SERS substrate that can detect 512 pM for Rhodamine6G and 6.8 pM for crystal violet. Further, the substrate allows the simultaneous detection of multiple analytes. By utilizing the Raman signal from Rhodamine 6G as the probe beam, the selective detection of Hg²⁺ ions as low as 100 pM is demonstrated.

Optical force decoration of 3D microstructures with plasmonic particles

Optical forces are used to push and aggregate gold nanorods onto several substrates creating surface-enhanced Raman scattering (SERS) active hot spots for Raman-based identification of proteins. By monitoring the increase of the protein SERS signal, we observe different aggregation times for different curvatures of the substrates. The slower aggregation dynamics on curved surfaces is justified by a simple geometrical model. In particular, this technique is used to decorate three-dimensional microstructures and to quickly realize hybrid micro/nanosensors for highly sensitive detection of biological material directly in a liquid environment.

Three-Dimensional Enantiomeric Recognition of Optically Trapped Single Chiral Nanoparticles

We optically trap freestanding single metallic chiral nanoparticles using a standing-wave optical tweezer. We also incorporate within the trap a polarimetric setup that allows us to perform in situ chiral recognition of single enantiomers. This is done by measuring the S_{3} component of the Stokes vector of a light beam scattered off the trapped nanoparticle in the forward direction. This unique combination of optical trapping and chiral recognition, all implemented within a single setup, opens new perspectives towards the control, recognition, and manipulation of chiral objects at nanometer scales.

Dynamics of the Optically Directed Assembly and Disassembly of Gold Nanoplatelet Arrays

The tremendous progress in nanoscience now allows the creation of static nanostructured materials for a broad range of applications. A further goal is to achieve dynamic and reconfigurable nanostructures. One approach involves nanoparticle-based optical matter, but so far, studies have only considered spherical constituents. A nontrivial issue is that nanoparticles with other shapes are expected to have different local electromagnetic field distributions and interactions with neighbors in optical-matter arrays. Therefore, one would expect their dynamics to be different as well. This paper reports the directed assembly of ordered arrays of gold nanoplatelets in optical line traps, demonstrating the reconfigurability of the array by altering the phase gradient via holographic-beam shaping. The weaker gradient forces and resultant slower motion of the nanoplatelets, as compared with plasmonic (Ag and Au) nanospheres, allow the precise study of their assembly and disassembly dynamics. Both temporal and spatial correlations are detected between particles separated by distances of hundreds of nanometers to several microns. Electrodynamics simulations reveal the presence of multipolar plasmon modes that induce short-range (near-field) and longer-range electrodynamic (e.g., optical binding) interactions. These interactions and the interferences between mutipolar plamon modes cause both the strong correlations and the nonuniform dynamics observed. Our study demonstrates new opportunities for the generation of complex addressable optical matter and the creation of novel active optical technology.

Surface plasmon resonance in gold nanoparticles: a review

In the last two decades, plasmon resonance in gold nanoparticles (Au NPs) has been the subject of intense research efforts. Plasmon physics is intriguing and its precise modelling proved to be challenging. In fact, plasmons are highly responsive to a multitude of factors, either intrinsic to the Au NPs or from the environment, and recently the need emerged for the correction of standard electromagnetic approaches with quantum effects. Applications related to plasmon absorption and scattering in Au NPs are impressively numerous, ranging from sensing to photothermal effects to cell imaging. Also, plasmon-enhanced phenomena are highly interesting for multiple purposes, including, for instance, Raman spectroscopy of nearby analytes, catalysis, or sunlight energy conversion. In addition, plasmon excitation is involved in a series of advanced physical processes such as non-linear optics, optical trapping, magneto-plasmonics, and optical activity. Here, we provide the general overview of the field and the background for appropriate modelling of the physical phenomena. Then, we report on the current state of the art and most recent applications of plasmon resonance in Au NPs.

Continuous micro-vortex-based nanoparticle manipulation via focused surface acoustic waves

Despite increasing demand in the manipulation of nanoscale objects for next generation biological and industrial processes, there is a lack of methods for reliable separation, concentration and purification of nanoscale objects. Acoustic methods have proven their utility in contactless manipulation of microscale objects mainly relying on the acoustic radiation effect, though the influence of acoustic streaming has typically prevented manipulation at smaller length scales. In this work, however, we explicitly take advantage of the strong acoustic streaming in the vicinity of a highly focused, high frequency surface acoustic wave (SAW) beam emanating from a series of focused 6 μm substrate wavelength interdigital transducers patterned on a piezoelectric lithium niobate substrate and actuated with a 633 MHz sinusoidal signal. This streaming field serves to focus fluid streamlines such that incoming particles interact with the acoustic field similarly regardless of their initial starting positions, and results in particle displacements that would not be possible with a travelling acoustic wave force alone. This streaming-induced manipulation of nanoscale particles is maximized with the formation of micro-vortices that extend the width of the microfluidic channel even with the imposition of a lateral flow, occurring when the streaming-induced flow velocities are an order of magnitude larger than the lateral one. We make use of this acoustic streaming to demonstrate the continuous and differential focusing of 100 nm, 300 nm and 500 nm particles.

Photonic Torque Microscopy of the Nonconservative Force Field for Optically Trapped Silicon Nanowires

We measure, by photonic torque microscopy, the nonconservative rotational motion arising from the transverse components of the radiation pressure on optically trapped, ultrathin silicon nanowires. Unlike spherical particles, we find that nonconservative effects have a significant influence on the nanowire dynamics in the trap. We show that the extreme shape of the trapped nanowires yields a transverse component of the radiation pressure that results in an orbital rotation of the nanowire about the trap axis. We study the resulting motion as a function of optical power and nanowire length, discussing its size-scaling behavior. These shape-dependent nonconservative effects have implications for optical force calibration and optomechanics with levitated nonspherical particles.

Direct measurement of the temperature profile close to an optically trapped absorbing particle

The surface temperature of an absorbing particle trapped in optical tweezers (OTs) is measured using a mixture of two fluorescent dyes. We analyze the dependence of temperature on both laser power and the radial distance from its surface, and we verify the 1/r decrease of temperature with increasing distance from the particle surface. We detect the variations of spectral profiles as the medium temperature changes. The temperature dependent signal, i.e., the ratio of summed intensities from two distinct spectral regions, is affected by the convolution of temperature profile with transfer function of the spectroscopic system. We analyze this effect and determine the temperature increase on the surface of a core-shell particle trapped by OTs.

Focus issue introduction: optical cooling and trapping

The year 2015 is an auspicious year for optical science, as it is being celebrated as the International Year of Light and Light-Based Technologies. This Focus Issue of the journals Optics Express and Journal of the Optical Society of America B has been organized by the OSA Technical Group on Optical Cooling and Trapping to mark this occasion, and to highlight the most recent and exciting developments in the topics covered by the group. Together this joint Focus Issue features 32 papers, including both experimental and theoretical works, which span this wide range of activities.