Extended resolution wide-field optical imaging: objective-launched standing-wave total internal reflection fluorescence microscopy

Grazing incidence to total internal reflection fluorescence structured illumination microscopy enabled by a prism telescope

In super-resolution structured illumination microscopy (SR-SIM) the separation between opposing laser spots in the back focal plane of the objective lens affects the pattern periodicity, and, thus, the resulting spatial resolution. Here, we introduce a novel hexagonal prism telescope which allows us to seamlessly change the separation between parallel laser beams for 3 pairs of beams, simultaneously. Each end of the prism telescope is composed of 6 Littrow prisms, which are custom-ground so they can be grouped together in the form of a tight hexagon. By changing the distance between the hexagons, the beam separation can be adjusted. This allows us to easily control the position of opposing laser spots in the back focal plane and seamlessly adjust the spatial frequency of the resulting interference pattern. This also enables the seamless transition from 2D-SIM to total internal reflection fluorescence (TIRF) excitation using objective lenses with a high numerical aperture. In linear SR-SIM the highest spatial resolution can be achieved for extreme TIRF angles. The prism telescope allows us to investigate how the spatial resolution and contrast depend on the angle of incidence near, at, and beyond the critical angle. We demonstrate this by imaging the cytoskeleton and plasma membrane of liver sinusoidal endothelial cells, which have a characteristic morphology consisting of thousands of small, transcellular pores that can only be observed by super-resolution microscopy.

Total Internal Reflection Fluorescence (TIRF) Microscopy

Total internal reflection fluorescence (TIRF) microscopy (TIRFM) is an elegant optical technique that provides for the excitation of fluorophores in an extremely thin axial region ("optical section"). The method is based on the principle that when excitation light is completely internally reflected in a transparent solid (e.g., coverglass) at its interface with liquid, an electromagnetic field, called the evanescent wave, is generated in the liquid at the solid-liquid interface and is the same frequency as the excitation light. Since the intensity of the evanescent wave exponentially decays with distance from the surface of the solid, only fluorescent molecules within a few hundred nanometers of the solid are efficiently excited. This overview will review the history, optical theory, and hardware configurations used in TIRFM. In addition, it will provide experimental details and methodological considerations for studying receptors at the plasma membrane in neurons. © 2022 Wiley Periodicals LLC.

Answering some questions about structured illumination microscopy

Structured illumination microscopy (SIM) provides images of fluorescent objects at an enhanced resolution greater than that of conventional epifluorescence wide-field microscopy. Initially demonstrated in 1999 to enhance the lateral resolution twofold, it has since been extended to enhance axial resolution twofold (2008), applied to live-cell imaging (2009) and combined with myriad other techniques, including interferometric detection (2008), confocal microscopy (2010) and light sheet illumination (2012). Despite these impressive developments, SIM remains, perhaps, the most poorly understood 'super-resolution' method. In this article, we provide answers to the 13 questions regarding SIM proposed by Prakash et al. along with answers to a further three questions. After providing a general overview of the technique and its developments, we explain why SIM as normally used is still diffraction-limited. We then highlight the necessity for a non-polynomial, and not just nonlinear, response to the illuminating light in order to make SIM a true, diffraction-unlimited, super-resolution technique. In addition, we present a derivation of a real-space SIM reconstruction approach that can be used to process conventional SIM and image scanning microscopy (ISM) data and extended to process data with quasi-arbitrary illumination patterns. Finally, we provide a simple bibliometric analysis of SIM development over the past two decades and provide a short outlook on potential future work. This article is part of the Theo Murphy meeting issue 'Super-resolution structured illumination microscopy (part 2)'.

Recent Progress in the Correlative Structured Illumination Microscopy

The super-resolution imaging technique of structured illumination microscopy (SIM) enables the mixing of high-frequency information into the optical transmission domain via light-source modulation, thus breaking the optical diffraction limit. Correlative SIM, which combines other techniques with SIM, offers more versatility or higher imaging resolution than traditional SIM. In this review, we first briefly introduce the imaging mechanism and development trends of conventional SIM. Then, the principles and recent developments of correlative SIM techniques are reviewed. Finally, the future development directions of SIM and its correlative microscopies are presented.

Spatially co-registered wide-field nonlinear optical imaging of living and complex biosystems in a total internal reflection geometry

Nonlinear optical microscopy that leverages an objective based total internal reflection (TIR) excitation scheme is an attractive means for rapid, wide-field imaging with enhanced surface sensitivity. Through select combinations of distinct modalities, one can, in principle, access complementary chemical and structural information for various chemical species near interfaces. Here, we report a successful implementation of such a wide-field nonlinear optical microscope system, which combines coherent anti-Stokes Raman scattering (CARS), two-photon fluorescence (TPF), second harmonic generation (SHG), and sum frequency generation (SFG) modalities on the same platform. The intense optical fields needed to drive these high order nonlinear optical processes are achieved through the use of femtosecond pulsed light in combination with the intrinsic field confinement induced by TIR over a large field of view. The performance of our multimodal microscope was first assessed through the experimental determination of its chemical fidelity, intensity and polarization dependences, and spatial resolution using a set of well-defined model systems. Subsequently, its unique capabilities were validated through imaging complex biological systems, including Hydrangea quercifolia pollen grains and Pantoea sp. YR343 bacterial cells. Specifically, the spatial distribution of different molecular groups in the former was visualized via vibrational contrast mechanisms of CARS, whereas co-registered TPF imaging allowed the identification of spatially localized intrinsic fluorophores. We further demonstrate the feasibility of our microscope for wide-field CARS imaging on live cells through independent characterization of cell viability using spatially co-registered TPF imaging. This approach to TIR enabled wide-field imaging is expected to provide new insights into bacterial strains and their interactions with other species in the rhizosphere in a time-resolved and chemically selective manner.

Highly compact and cost-effective 2-beam super-resolution structured illumination microscope based on all-fiber optic components

Current super-resolution structured illumination microscopes (SR-SIM) utilize relatively expensive electro-optic components and free-space optics, resulting in large setups. Moreover, high power laser sources are required to compensate for the losses associated with generating the illumination pattern by diffractive optics. Here, we present a highly compact and flexible 2D SR-SIM microscope based on all-fiber optic components (fiberSIM). Fiber-splitters deliver the laser light to the sample resulting in the interference illumination pattern. A microelectromechanical systems (MEMS) based fiber switch performs rapid pattern rotation. The pattern phase shift is achieved by the spatial displacement of one arm of the fiber interferometer using a piezoelectric crystal. Compared with existing methods, fiberSIM is highly compact and significantly reduces the SR-SIM component cost while achieving comparable results, thus providing a route to making SR-SIM technology accessible to even more laboratories in the life sciences.

Metamaterial assisted illumination nanoscopy via random super-resolution speckles

Structured illumination microscopy (SIM) is one of the most powerful and versatile optical super-resolution techniques. Compared with other super-resolution methods, SIM has shown its unique advantages in wide-field imaging with high temporal resolution and low photon damage. However, traditional SIM only has about 2 times spatial resolution improvement compared to the diffraction limit. In this work, we propose and experimentally demonstrate an easily-implemented, low-cost method to extend the resolution of SIM, named speckle metamaterial-assisted illumination nanoscopy (speckle-MAIN). A metamaterial structure is introduced to generate speckle-like sub-diffraction-limit illumination patterns in the near field with improved spatial frequency. Such patterns, similar to traditional SIM, are then used to excite objects on top of the surface. We demonstrate that speckle-MAIN can bring the resolution down to 40 nm and beyond. Speckle-MAIN represents a new route for super-resolution, which may lead to important applications in bio-imaging and surface characterization.

Structured illumination microscopy is usually limited to 2 times spatial resolution improvement over the diffraction limit. Here, the authors introduce a metamaterial structure to generate speckle-like sub-diffraction limit illumination patterns in the near field, and achieve a 7-fold resolution improvement down to 40 nm.

High-speed super-resolution imaging of rotationally symmetric structures using SPEED microscopy and 2D-to-3D transformation

Various super-resolution imaging techniques have been developed to break the diffraction-limited resolution of light microscopy. However, it still remains challenging to obtain three-dimensional (3D) super-resolution information of structures and dynamic processes in live cells at high speed. We recently developed high-speed single-point edge-excitation sub-diffraction (SPEED) microscopy and its two-dimensional (2D)-to-3D transformation algorithm to provide an effective approach to achieving 3D sub-diffraction-limit information in subcellular structures and organelles that have rotational symmetry. In contrast to most other 3D super-resolution microscopy or 3D particle-tracking microscopy approaches, SPEED microscopy does not depend on complex optical components and can be implemented onto a standard inverted epifluorescence microscope. SPEED microscopy is specifically designed to obtain 2D spatial locations of individual immobile or moving fluorescent molecules inside sub-micrometer biological channels or cavities at high spatiotemporal resolution. After data collection, post-localization 2D-to-3D transformation is applied to obtain 3D super-resolution structural and dynamic information. The complete protocol, including cell culture and sample preparation (6-7 d), SPEED imaging (4-5 h), data analysis and validation through simulation (5-13 h), takes ~9 d to complete.

Super-Resolution Live Cell Microscopy of Membrane-Proximal Fluorophores

Here, we present a simple and robust experimental setup for the super-resolution live cell microscopy of membrane-proximal fluorophores, which is comparably easy to perform and to implement. The method is based on Structured Illumination Microscopy (SIM) with a switchable spatial light modulator (SLM) and exchangeable objective lenses for epi-illumination and total internal reflection fluorescence (TIRF) microscopy. While, in the case of SIM (upon epi-illumination), cell layers of about 1-2 µm in close proximity to the plasma membrane can be selected by software, layers in the 100 nm range are assessed experimentally by TIRF-SIM. To show the applicability of this approach, both methods are used to measure the translocation of the glucose transporter 4 (GLUT4) from intracellular vesicles to the plasma membrane upon stimulation by insulin or insulin-mimetic compounds, with a lateral resolution of around 100 nm and an axial resolution of around 200 nm. While SIM is an appropriate method to visualize the intracellular localization of GLUT4 fused with a green fluorescent protein, TIRF-SIM permits the quantitative evaluation of its fluorescence in the plasma membrane. These imaging methods are discussed in the context of fluorescence lifetime kinetics, providing additional data for the molecular microenvironment.

Super-Resolution Imaging of Tight and Adherens Junctions: Challenges and Open Questions

The tight junction (TJ) and the adherens junction (AJ) bridge the paracellular cleft of epithelial and endothelial cells. In addition to their role as protective barriers against bacteria and their toxins they maintain ion homeostasis, cell polarity, and mechano-sensing. Their functional loss leads to pathological changes such as tissue inflammation, ion imbalance, and cancer. To better understand the consequences of such malfunctions, the junctional nanoarchitecture is of great importance since it remains so far largely unresolved, mainly because of major difficulties in dynamically imaging these structures at sufficient resolution and with molecular precision. The rapid development of super-resolution imaging techniques ranging from structured illumination microscopy (SIM), stimulated emission depletion (STED) microscopy, and single molecule localization microscopy (SMLM) has now enabled molecular imaging of biological specimens from cells to tissues with nanometer resolution. Here we summarize these techniques and their application to the dissection of the nanoscale molecular architecture of TJs and AJs. We propose that super-resolution imaging together with advances in genome engineering and functional analyses approaches will create a leap in our understanding of the composition, assembly, and function of TJs and AJs at the nanoscale and, thereby, enable a mechanistic understanding of their dysfunction in disease.

Hybrid representations of asymmetrically excited surface plasmon self-interference at a planar dielectric/metal interface

We introduce a hybrid representation to describe asymmetrically excited surface plasmon (SP) self-interference at a planar dielectric/metal interface. The hybrid representation combines a ray model, angular spectrum representation, near-field spatial frequency analysis, and parameter characterization to investigate the incidence coupling and spatial resolution degradation of the SP self-interference. We also propose SP numerical aperture for self-interference virtual probe imaging. We explain the shift in the main peak in asymmetrical excitation. Individual models are used to study the various characteristic features in detail, and physical insights are gained. We examine the consistency of the results obtained using the different models and demonstrate the effectiveness of the hybrid representation for describing the asymmetrically excited SP self-interference.

Decoding the Information Contained in Fluorophore Radiation Patterns

Dipole radiation patterns change when a fluorescent molecule comes close to the boundary between media of different refractive indices. Near-interface molecules emit mostly into the higher-index medium, predominantly around the critical angle. The radiation pattern encodes information about the emitter distance, orientation, and the refractive index of the embedding medium. Analyses of the supercritical angle fluorescence on pupil plane images can retrieve this information and have been applied both for refractometry with subcellular resolution and for the detection of metabolically active cancerous cells. In this issue of ACS Nano, Ferdman et al. employ this strategy in a label-free assay for detecting single bacteria, based on measuring the refractive-index change produced by bacterial growth in a fluorophore-coated microfluidic channel.

Investigation on improvement of lateral resolution of continuous wave STED microscopy by standing wave illumination

In this paper, we report the enhancement of resolution of continuous wave (CW) stimulated emission depletion (STED) microscopy by a novel method of structured illumination of an excitation beam. Illumination by multiple excitation beams through the specific pupil apertures with high in-plane wave vectors leads to interference of diffracted light flux near the focal plane, resulting in the contraction of the point spread function (PSF) of the excitation. Light spot reduction by the suggested standing wave (SW) illumination method contributes to make up much lower depletion efficiency of the CW STED microscopy than that of the pulsed STED method. First, theoretical analysis showed that the full width at half maximum (FWHM) of the effective PSF on the detection plane is expected to be smaller than 25% of that of conventional CW STED. Second, through the simulation, it was elucidated that both the donut-shaped PSF of the depletion beam and the confocal optics suppress undesired contribution of sidelobes of the PSF by the SW illumination to the effective PSF of the STED system. Finally, through the imaging experiment on 40-nm fluorescent beads with the developed SW-CW STED microscopy system, we obtained the result which follows the overall tendency from the simulation in the aspects of resolution improvement and reduction of sidelobes. Based on the obtained result, we expect that the proposed method can become one of the strategies to enhance the resolution of the CW STED microscopy.

Widefield and total internal reflection fluorescent structured illumination microscopy with scanning galvo mirrors

We present an alternative approach to realize structured illumination microscopy (SIM), which is capable for live cell imaging. The prototype utilizes two sets of scanning galvo mirrors, a polarization converter and a piezo-platform to generate a fast shifted, s-polarization interfered and periodic variable illumination patterns. By changing the angle of the scanning galvanometer, we can change the position of the spots at the pupil plane of the objective lens arbitrarily, making it easy to switch between widefield and total internal reflection fluorescent-SIM mode and adapting the penetration depth in the sample. Also, a twofold resolution improvement is achieved in our experiments. The prototype offers more flexibility of pattern period and illumination orientation changing than previous systems.

High-resolution light-scattering imaging with two-dimensional hexagonal illumination patterns: system implementation and image reconstruction formulations

Structured illumination microscopy (SIM) was recently adapted to coherent imaging, named structured oblique-illumination microscopy (SOIM), to improve the contrast and resolution of a light-scattering image. Herein, we present high-resolution laterally isotropic SOIM imaging with 2D hexagonal illuminations. The SOIM is implemented in a SIM fluorescence system based on a spatial-light modulator (SLM). We design an SLM pattern to generate diffraction beams at 0° and ± 60.3° simultaneously to form a 2D hexagonal illumination, and undertake calculations to obtain optimal SLM shifts at 19 phases to yield a reconstructed image correctly. Beams of linear and circular polarizations are used to show the effect of polarization on the resolution improvement. We derive the distributions of the electric field of the resultant hexagonal patterns and work out the formulations of the corresponding coherent-scattering imaging for image reconstruction. The reconstructed images of gold nanoparticles (100 nm) confirm the two-fold improvement of resolution and reveal the effect of polarization on resolving adjacent nanoparticles. To demonstrate biological applications, we present the cellular structures of a label-free fixed HeLa cell with improved contrast and resolution. This work enables one to perform high-resolution dual-mode - fluorescence and light-scattering - imaging in a system, and is expected to broaden the applications of SOIM.

Paraxial models for the surface plasmon self- interference at off-axis excitation

The surface plasmon self-interference excited by a strongly focused, linearly polarized vortex beam at off-axis illumination in a paraxial regime is analytically studied. The off-axis excitation is investigated using a geometrical model. The combination of an angular spectrum representation and homogeneous transformation is applied to derive the integral expressions of the surface plasmon polariton fields for off-axis directions both parallel and perpendicular to polarization plane, and an off-axis convergence angle is used to compute the integral. The surface plasmon excitation is represented by the relative peak intensity of the longitudinal field, while its standing wave is characterized by the full width at half-maximum of the transmitted field intensity distribution profile. Both models consistently show that even in ideal Gaussian microscopic imaging systems, self-interference degradation exists. When the off-axis angle increases, the surface plasmon interference disappears and the fields detune out of surface plasmon resonance.

Optimal 2D-SIM reconstruction by two filtering steps with Richardson-Lucy deconvolution

Structured illumination microscopy relies on reconstruction algorithms to yield super-resolution images. Artifacts can arise in the reconstruction and affect the image quality. Current reconstruction methods involve a parametrized apodization function and a Wiener filter. Empirically tuning the parameters in these functions can minimize artifacts, but such an approach is subjective and produces volatile results. We present a robust and objective method that yields optimal results by two straightforward filtering steps with Richardson-Lucy-based deconvolutions. We provide a resource to identify artifacts in 2D-SIM images by analyzing two main reasons for artifacts, out-of-focus background and a fluctuating reconstruction spectrum. We show how the filtering steps improve images of test specimens, microtubules, yeast and mammalian cells.

Double moiré structured illumination microscopy with high-index materials

Structured illumination microscopy utilizes illumination of periodic light patterns to allow reconstruction of high spatial frequencies, conventionally doubling the microscope's resolving power. This Letter presents a structured illumination microscopy scheme with the ability to achieve 60 nm resolution by using total internal reflection of a double moiré pattern in high-index materials. We propose a realization that provides dynamic control over relative amplitudes and phases of four coherently interfering beams in gallium phosphide and numerically demonstrate its capability.

A Guide to Structured Illumination TIRF Microscopy at High Speed with Multiple Colors

Optical super-resolution imaging with structured illumination microscopy (SIM) is a key technology for the visualization of processes at the molecular level in the chemical and biomedical sciences. Although commercial SIM systems are available, systems that are custom designed in the laboratory can outperform commercial systems, the latter typically designed for ease of use and general purpose applications, both in terms of imaging fidelity and speed. This article presents an in-depth guide to building a SIM system that uses total internal reflection (TIR) illumination and is capable of imaging at up to 10 Hz in three colors at a resolution reaching 100 nm. Due to the combination of SIM and TIRF, the system provides better image contrast than rival technologies. To achieve these specifications, several optical elements are used to enable automated control over the polarization state and spatial structure of the illumination light for all available excitation wavelengths. Full details on hardware implementation and control are given to achieve synchronization between excitation light pattern generation, wavelength, polarization state, and camera control with an emphasis on achieving maximum acquisition frame rate. A step-by-step protocol for system alignment and calibration is presented and the achievable resolution improvement is validated on ideal test samples. The capability for video-rate super-resolution imaging is demonstrated with living cells.

Eliminating unwanted far-field excitation in objective-type TIRF. Part I. identifying sources of nonevanescent excitation light

Total internal reflection fluorescence microscopy (TIRFM) achieves subdiffraction axial sectioning by confining fluorophore excitation to a thin layer close to the cell/substrate boundary. However, it is often unknown how thin this light sheet actually is. Particularly in objective-type TIRFM, large deviations from the exponential intensity decay expected for pure evanescence have been reported. Nonevanescent excitation light diminishes the optical sectioning effect, reduces contrast, and renders TIRFM-image quantification uncertain. To identify the sources of this unwanted fluorescence excitation in deeper sample layers, we here combine azimuthal and polar beam scanning (spinning TIRF), atomic force microscopy, and wavefront analysis of beams passing through the objective periphery. Using a variety of intracellular fluorescent labels as well as negative staining experiments to measure cell-induced scattering, we find that azimuthal beam spinning produces TIRFM images that more accurately portray the real fluorophore distribution, but these images are still hampered by far-field excitation. Furthermore, although clearly measureable, cell-induced scattering is not the dominant source of far-field excitation light in objective-type TIRF, at least for most types of weakly scattering cells. It is the microscope illumination optical path that produces a large cell- and beam-angle invariant stray excitation that is insensitive to beam scanning. This instrument-induced glare is produced far from the sample plane, inside the microscope illumination optical path. We identify stray reflections and high-numerical aperture aberrations of the TIRF objective as one important source. This work is accompanied by a companion paper (Pt.2/2).

Full-field dual-color 100-nm super-resolution imaging reveals organization and dynamics of mitochondrial and ER networks

Most structured illumination microscopes use a physical or synthetic grating that is projected into the sample plane to generate a periodic illumination pattern. Albeit simple and cost-effective, this arrangement hampers fast or multi-color acquisition, which is a critical requirement for time-lapse imaging of cellular and sub-cellular dynamics. In this study, we designed and implemented an interferometric approach allowing large-field, fast, dual-color imaging at an isotropic 100-nm resolution based on a sub-diffraction fringe pattern generated by the interference of two colliding evanescent waves. Our all-mirror-based system generates illumination pat-terns of arbitrary orientation and period, limited only by the illumination aperture (NA = 1.45), the response time of a fast, piezo-driven tip-tilt mirror (10 ms) and the available fluorescence signal. At low µW laser powers suitable for long-period observation of life cells and with a camera exposure time of 20 ms, our system permits the acquisition of super-resolved 50 µm by 50 µm images at 3.3 Hz. The possibility it offers for rapidly adjusting the pattern between images is particularly advantageous for experiments that require multi-scale and multi-color information. We demonstrate the performance of our instrument by imaging mitochondrial dynamics in cultured cortical astrocytes. As an illustration of dual-color excitation dual-color detection, we also resolve interaction sites between near-membrane mitochondria and the endoplasmic reticulum. Our TIRF-SIM microscope provides a versatile, compact and cost-effective arrangement for super-resolution imaging, allowing the investigation of co-localization and dynamic interactions between organelles--important questions in both cell biology and neurophysiology.

Three-beam interference with circular polarization for structured illumination microscopy

Three-dimensional structured illumination microscopy (3D-SIM) is a wide-field technique that can provide doubled resolution and improved image contrast. In this work, we demonstrate a simple approach to 3D-SIM - using three-beam interference with circular polarization to generate the pattern of structured illumination, so that the modulation contrast is routinely maintained at all orientations without a complicated polarization rotator or mechanical motion. We derive the resultant intensity distribution of the interference pattern to confirm the modulation contrast independent of orientation, and compare the result with those using interfering beams of linear polarization. To evaluate the influence of the modulation contrast on imaging, we compare the simulated SIM images of 100-nm beads. Experimental results are presented to confirm the simulations. Our approach requires merely a λ/4-wave plate to alter the interfering beams from linear to circular polarization. This simplicity together with the use of a spatial light modulator to control the interference pattern facilitates the implementation of a 3D-SIM system and should broaden its application.

Spatial filtering nearly eliminates the side-lobes in single- and multi-photon 4pi-type-C super-resolution fluorescence microscopy

Super-resolution microscopy has tremendously progressed our understanding of cellular biophysics and biochemistry. Specifically, 4pi fluorescence microscopy technique stands out because of its axial super-resolution capability. All types of 4pi-microscopy techniques work well in conjugation with deconvolution techniques to get rid of artifacts due to side-lobes. In this regard, we propose a technique based on spatial filter in a 4pi-type-C confocal setup to get rid of these artifacts. Using a special spatial filter, we have reduced the depth-of-focus. Interference of two similar depth-of-focus beams in a 4π geometry result in substantial reduction of side-lobes. Studies show a reduction of side-lobes by 46% and 76% for single and two photon variant compared to 4pi - type - C confocal system. This is incredible considering the resolving capability of the existing 4pi - type - C confocal microscopy. Moreover, the main lobe is found to be 150 nm for the proposed spatial filtering technique as compared to 690 nm of the state-of-art confocal system. Reconstruction of experimentally obtained 2PE - 4pi data of green fluorescent protein (GFP)-tagged mitocondrial network shows near elimination of artifacts arising out of side-lobes. Proposed technique may find interesting application in fluorescence microscopy, nano-lithography, and cell biology.

Theoretical analysis of obliquely excited surface plasmon self-interference

We present the theoretical analysis of surface plasmon polaritons induced by a tightly focused light beam at oblique incidence. Firstly, we propose a geometrical model to explain the evolution of SPPs effect as light deviating from normal incidence, and introduce a concept of critical oblique angle (θ(co)) which is one of the key factors affecting the stability, efficiency and lateral resolution of SPPs. Secondly, the integral expressions for the transmitted SPP field excited by a linearly polarized vortex beam are derived, using angular spectrum representation and rotation matrix trans-formation, for the oblique directions as parallel and perpendicular to polarization plane. An interesting finding is that the system completely goes out of SPP self-interference resonance at an incident angle smaller than θ(co) at parallel obliquity, while larger than θ(co) at perpendicular obliquity.

Breaking the resolution limit in light microscopy

The advancement in fluorescence microscopy has dramatically enhanced the obtainable optical resolution enabling the users to inspect the structures of interest at finer and finer level of detail. This chapter describes some of these methods and how they break the classical resolution limit. The labeling of targets, such as individual genetic loci, specific proteins, or organelles, is possible inside living cells, which led to the extensive use of fluorescence microscopy in life sciences. Other microscopic modes usually lack this high specificity but sometimes provide other useful information such as the orientation of molecular species in polarization microscopy. Modes, such as differential interference contrast, phase contrast, or dark field, are useful to discriminate and follow cells or structures within them without the need for specific labeling. However, classically the resolution of all of these light microscopic modes was far below that of the electron microscope, and only some recent approaches have made significant progress in resolution increase. Recently, many microscopy methods have dramatically enhanced the resolution. Gradually, these methods are now applied to solve biological problems. The most promising approaches are all based on fluorescence and use either nonlinear interaction of light with the sample (STED, nonlinear structured illumination, dynamic saturation optical microscopy, or saturation in the time domain) or precise localization of individual particles or molecules with subsequent image generation.

Spatial filter based bessel-like beam for improved penetration depth imaging in fluorescence microscopy

Monitoring and visualizing specimens at a large penetration depth is a challenge. At depths of hundreds of microns, several physical effects (such as, scattering, PSF distortion and noise) deteriorate the image quality and prohibit a detailed study of key biological phenomena. In this study, we use a Bessel-like beam in-conjugation with an orthogonal detection system to achieve depth imaging. A Bessel-like penetrating diffractionless beam is generated by engineering the back-aperture of the excitation objective. The proposed excitation scheme allows continuous scanning by simply translating the detection PSF. This type of imaging system is beneficial for obtaining depth information from any desired specimen layer, including nano-particle tracking in thick tissue. As demonstrated by imaging the fluorescent polymer-tagged-CaCO₃ particles and yeast cells in a tissue-like gel-matrix, the system offers a penetration depth that extends up to 650 µm. This achievement will advance the field of fluorescence imaging and deep nano-particle tracking.

Lateral superresolution using a posteriori phase shift estimation for a moving object: experimental results

Structured illumination imaging uses multiple images of an object having different phase shifts in the sinusoidally patterned illumination to obtain lateral superresolution in stationary specimens in microscopy. In our recent work we have discussed a method to estimate these phase shifts a posteriori, allowing us to apply this technique to non-stationary objects such as in vivo tissue. Here we show experimental verification of our earlier simulations for phase shift estimation a posteriori. We estimated phase shifts in fluorescence microscopy images for an object having unknown, random translational motion and used them to obtain an artifact-free reconstruction having the expected superresolution.

Total internal reflection fluorescence (TIRF) microscopy

Total internal reflection fluorescence (TIRF) microscopy (TIRFM) is an elegant optical technique that provides for the excitation of fluorophores in an extremely thin axial region ("optical section"). The method is based on the principle that when excitation light is totally internally reflected in a transparent solid (e.g., coverglass) at its interface with liquid, an electromagnetic field, called the evanescent wave, is generated in the liquid at the solid-liquid interface and is the same frequency as the excitation light. Since the intensity of the evanescent wave exponentially decays with distance from the surface of the solid, only fluorescent molecules within a few hundred nanometers of the solid are efficiently excited. This unit will briefly review the history, optical theory, and different hardware configurations used in TIRFM. In addition, it will provide experimental details and methodological considerations for studying receptors at the plasma membrane in neurons.

High-resolution total-internal-reflection fluorescence microscopy using periodically nanostructured glass slides

We compare the performance of a total-internal-reflection fluorescence microscope under varying illumination and substrate conditions. The samples are deposited on a standard homogeneous glass slide or on a grating and illuminated by one or two interfering beams at various incident angles. A conjugate gradient with positivity a priori information is used to reconstruct the fluorophore density from the images. Numerical studies demonstrate that when the sample lies on an optimized grating, the lateral resolution of the microscope is greatly improved, up to fourfold, the best result being obtained when the grating is illuminated by two interfering beams.

Isotropic image in structured illumination microscopy patterned with a spatial light modulator

We developed a structured illumination microscopy (SIM) system that uses a spatial light modulator (SLM) to generate interference illumination patterns at four orientations - 0 degrees, 45 degrees, 90 degrees, and 135 degrees, to reconstruct a high-resolution image. The use of a SLM for pattern alterations is rapid and precise, without mechanical calibration; moreover, our design of SLM patterns allows generating the four illumination patterns of high contrast and nearly equivalent periods to achieve a near isotropic enhancement in lateral resolution. We compare the conventional image of 100-nm beads with those reconstructed from two (0 degrees +90 degrees or 45 degrees +135 degrees) and four (0 degrees +45 degrees +90 degrees +135 degrees) pattern orientations to show the differences in resolution and image, with the support of simulations. The reconstructed images of 200-nm beads at various depths and fine structures of actin filaments near the edge of a HeLa cell are presented to demonstrate the intensity distributions in the axial direction and the prospective application to biological systems.

Fast two-dimensional standing-wave total-internal-reflection fluorescence microscopy using acousto-optic deflectors

We report a scheme for 2D standing-wave total-internal-reflection fluorescence microscopy. Standing-wave patterns are generated by two interfering beams coupled through the objective lens. Period, angular orientation, and phase of standing waves are controlled entirely by acousto-optic deflectors. The lateral resolution improvement of 100 nm is combined with an axial selectivity of <100 nm by utilizing an evanescent standing-wave pattern. This technique can provide real-time imaging of subresolution structures in live biological specimens near a glass-water interface.

Phase-shift estimation in sinusoidally illuminated images for lateral superresolution

Sinusoidally patterned illumination has been used to obtain lateral superresolution and axial sectioning in images. In both of these techniques multiple images are taken with the object illuminated by a sinusoidal pattern, the phase of the sinusoidal illumination being shifted differently in each image. The knowledge of these phase shifts is critical for image reconstruction. We discuss a method to estimate this phase shift with no prior knowledge of the shifts. In postprocessing we estimate randomly introduced, unknown phase shifts and process the images to obtain a superresolved image. Results of computer simulations are shown.

Measurement of nanoparticle sizes by conventional optical microscopy with standing evanescent field illumination

The size of a particle smaller than the diffraction limit is measured using a conventional optical microscope by adopting a standing evanescent field illumination. The scattering intensity from a nanoparticle is periodically modulated by shifting the intensity fringes of the standing evanescent field. By measuring contrast of scattering intensity variation during one cycle of modulation, particle sizes can be estimated easily. Furthermore, material dependence can be canceled using contrast as an evaluation factor. From the experimental results, particle sizes ranging from 20 to 250 nm are successfully determined. This technique offers a low-cost size measurement for nanoparticles.

A programmable light engine for quantitative single molecule TIRF and HILO imaging

We report on a simple yet powerful implementation of objective-type total internal reflection fluorescence (TIRF) and highly inclined and laminated optical sheet (HILO, a type of dark-field) illumination. Instead of focusing the illuminating laser beam to a single spot close to the edge of the microscope objective, we are scanning during the acquisition of a fluorescence image the focused spot in a circular orbit, thereby illuminating the sample from various directions. We measure parameters relevant for quantitative image analysis during fluorescence image acquisition by capturing an image of the excitation light distribution in an equivalent objective backfocal plane (BFP). Operating at scan rates above 1 MHz, our programmable light engine allows directional averaging by circular spinning the spot even for sub-millisecond exposure times. We show that restoring the symmetry of TIRF/HILO illumination reduces scattering and produces an evenly lit field-of-view that affords on-line analysis of evanescnt-field excited fluorescence without pre-processing. Utilizing crossed acousto-optical deflectors, our device generates arbitrary intensity profiles in BFP, permitting variable-angle, multi-color illumination, or objective lenses to be rapidly exchanged.

Analysis of surface plasmon interference pattern formed by optical vortex beams

Following our recent experimental approach to excitation of surface plasmon polaritons induced by optical vortex beams [5], we report further analysis and verification of the surface plasmon interference pattern formed by locally excited standing surface plasmon polaritons in a metal/dielectric film. Our simulation model can be demonstrated by using angular spectrum representation. The generated standing interference pattern has potential as a resolution enhancement technique for sub-diffraction imaging.

Fluorescence imaging of membrane dynamics

Imaging membrane dynamics is an important goal, motivated by the abundance of biochemical and biophysical events that are orchestrated at, or by, cellular membranes. The short length scales, fast timescales, and environmental requirements of membrane phenomena present challenges to imaging experiments. Several technical advances offer means to overcome these challenges, and we describe here three powerful techniques applicable to membrane imaging: total internal reflection fluorescence (TIRF) microscopy, fluorescence interference contrast (FLIC) microscopy, and fluorescence correlation spectroscopy (FCS). For each, we discuss the physics underpinning the approach, its practical implementation, and recent examples highlighting its achievements in exploring the membrane environment.

Structured illumination in total internal reflection fluorescence microscopy using a spatial light modulator

In wide-field fluorescence microscopy, illuminating the specimen with evanescent standing waves increases lateral resolution more than twofold. We report a versatile setup for standing-wave illumination in total internal reflection fluorescence microscopy. An adjustable diffraction grating written on a phase-only spatial light modulator controls the illumination field. Selecting appropriate diffraction orders and displaying a sheared (tilted) diffraction grating allows one to tune the penetration depth in very fine steps. The setup achieves 91 nm lateral resolution for green emission.

Ultrastructural immunochemistry

INTRODUCTIONThe use of colloidal gold technology was undoubtedly the most significant event in the development of immunochemistry. Gold particles are particularly useful for transmission electron microscopy (TEM) studies, because they scatter electrons strongly and even small particles are clearly visible under the electron microscope. Before proceeding to immunogold staining, it is important to gather as much information as possible about the antibody of interest and its respective antigen: Where is it likely to be located? Is the antigen extracellular, intracellular, membrane-associated, or a soluble component of the cytoplasm? Is it present in significant quantities? Is it sequestered at high concentration in any specific subcellular compartment, such as the mitochondria or the nucleus? How vulnerable to fixation and embedding is the antigen of interest? Information on the specificity of antibodies from Western blotting is valuable, but is not guaranteed to be useful for immunochemistry. Antibodies that "work well" on blots frequently have to be used at concentrations of up to three or more orders of magnitude greater for immunofluorescence and even more for immunogold staining studies, and some antibodies simply cannot be used for immunochemistry. This article describes methods and considerations for the use of immunogold staining, including fixation, controls, resolution, and quantification.

Effects of inhomogeneous fields in superresolving structured-illumination microscopy

The increased resolution attained by structured illumination is based on the degree to which high spatial frequencies can be down converted into the passband of the imaging system. To effectively do this, a high contrast high-frequency illumination pattern is required. We show how the use of high numerical aperture (1.42 NA and 1.65 NA) microscope objectives in structured-illumination microscopy can provide relatively high-frequency illumination patterns. However, a consequence of this is that the resulting illumination pattern can become evanescently decaying and thus becomes inhomogeneous within a microscopically extended sample medium. We demonstrate how these inhomogeneous fields impact the superresolved imaging of the microscope and how these adverse effects can be avoided.

Beyond the diffraction limit: far-field fluorescence imaging with ultrahigh resolution

Fluorescence microscopy is an important and extensively utilised tool for imaging biological systems. However, the image resolution that can be obtained has a limit as defined through the laws of diffraction. Demand for improved resolution has stimulated research into developing methods to image beyond the diffraction limit based on far-field fluorescence microscopy techniques. Rapid progress is being made in this area of science with methods emerging that enable fluorescence imaging in the far-field to possess a resolution well beyond the diffraction limit. This review outlines developments in far-field fluorescence methods which enable ultrahigh resolution imaging and application of these techniques to biology. Future possible trends and directions in far-field fluorescence imaging with ultrahigh resolution are also outlined.

Two-dimensional standing wave total internal reflection fluorescence microscopy: superresolution imaging of single molecular and biological specimens

The development of high resolution, high speed imaging techniques allows the study of dynamical processes in biological systems. Lateral resolution improvement of up to a factor of 2 has been achieved using structured illumination. In a total internal reflection fluorescence microscope, an evanescence excitation field is formed as light is total internally reflected at an interface between a high and a low index medium. The <100 nm penetration depth of evanescence field ensures a thin excitation region resulting in low background fluorescence. We present even higher resolution wide-field biological imaging by use of standing wave total internal reflection fluorescence (SW-TIRF). Evanescent standing wave (SW) illumination is used to generate a sinusoidal high spatial frequency fringe pattern on specimen for lateral resolution enhancement. To prevent thermal drift of the SW, novel detection and estimation of the SW phase with real-time feedback control is devised for the stabilization and control of the fringe phase. SW-TIRF is a wide-field superresolution technique with resolution better than a fifth of emission wavelength or approximately 100 nm lateral resolution. We demonstrate the performance of the SW-TIRF microscopy using one- and two-directional SW illumination with a biological sample of cellular actin cytoskeleton of mouse fibroblast cells as well as single semiconductor nanocrystal molecules. The results confirm the superior resolution of SW-TIRF in addition to the merit of a high signal/background ratio from TIRF microscopy.