The role of muscle loading on bone (Re)modeling at the developing enthesis

The trabecular architecture of the popliteal sesamoid bone (cyamella) from a New Zealand white rabbit (Oryctolagus cuniculus)

Sesamoid bones are ossified structures that are embedded in tendons near articulation. They consist of an inner trabecular bone architecture surrounded by a thin cortical shell. While the formation of sesamoid bones is probably mainly controlled by genetic factors, the proper development and mineralization of a sesamoid bone depends also on mechanical stimulation. While most sesamoid bones are not loaded directly by other bones during locomotion, they still experience forces directed from the tendon in which they are embedded. In cases when the sesamoid bone is experiencing forces only from a single tendon, such as the cyamella in the rabbit, this may give us a tool to study bone functional adaptation in a relatively simple loading setting. This study investigates the internal trabecular architecture of the popliteal sesamoid bone (cyamellae) in New Zealand white (NZW) rabbits (Oryctolagus cuniculus). Five hind limbs of NZW rabbits were micro-computed tomography scanned and the cortical and trabecular architectures of the cyamellae were evaluated. The results revealed that similar to the patella, the cyamella has a thin cortex and a high trabecular bone volume fraction (BV/TV), which is derived mostly from the high trabecular thickness (Tb.Th). Trabecular BV/TV and Tb.Th were not distributed homogeneously, but they were lower at the periphery and higher closer to the proximal and middle of the cyamella, near the musculotendinous junction. The results also demonstrated that trabeculae tend to align along two recognizable orientations, one with the direction of tensile stresses, in line with the popliteal tendon, and the second bridging the narrow space between the cranial and caudal cortical faces of the bone.

Histological and immunohistochemical guide to tendon tissue

Tendons are unique dense connective tissues with discrete zones having specific structure and function. They are juxtaposed with other tissues (e.g., bone, muscle, and fat) with different compositional, structural, and mechanical properties. Additionally, tendon properties change drastically with growth and development, disease, aging, and injury. Consequently, there are unique challenges to performing high quality histological assessment of this tissue. To address this need, histological assessment was one of the breakout session topics at the 2022 Orthopaedic Research Society (ORS) Tendon Conference hosted at the University of Pennsylvania. The purpose of the breakout session was to discuss needs from members of the ORS Tendon Section related to histological procedures, data presentation, knowledge dissemination, and guidelines for future work. Therefore, this review provides a brief overview of the outcomes of this discussion and provides a set of guidelines, based on the perspectives from our laboratories, for histological assessment to assist researchers in their quest to utilize these techniques to enhance the outcomes and interpretations of their studies.

Biological approaches to the repair and regeneration of the rotator cuff tendon-bone enthesis: a literature review

Entheses are highly specialised organs connecting ligaments and tendons to bones, facilitating force transmission, and providing mechanical strengths to absorb forces encountered. Two types of entheses, fibrocartilaginous and fibrous, exist in interfaces. The gradual fibrocartilaginous type is in rotator cuff tendons and is more frequently injured due to the poor healing capacity that leads to loss of the original structural and biomechanical properties and is attributed to the high prevalence of retears. Fluctuating methodologies and outcomes of biological approaches are challenges to overcome for them to be routinely used in clinics. Therefore, stratifying the existing literature according to different categories (chronicity, extent of tear, and studied population) would effectively guide repair approaches. This literature review supports tissue engineering approaches to promote rotator cuff enthesis healing employing cells, growth factors, and scaffolds period. Outcomes suggest its promising role in animal studies as well as some clinical trials and that combination therapies are more beneficial than individualized ones. It then highlights the importance of tailoring interventions according to the tear extent, chronicity, and the population being treated. Contributing factors such as loading, deficiencies, and lifestyle habits should also be taken into consideration. Optimum results can be achieved if biological, mechanical, and environmental factors are approached. It is challenging to determine whether variations are due to the interventions themselves, the animal models, loading regimen, materials, or tear mechanisms. Future research should focus on tailoring interventions for different categories to formulate protocols, which would best guide regenerative medicine decision making.

Building a Co-ordinated Musculoskeletal System: The Plasticity of the Developing Skeleton in Response to Muscle Contractions

The skeletal musculature and the cartilage, bone and other connective tissues of the skeleton are intimately co-ordinated. The shape, size and structure of each bone in the body is sculpted through dynamic physical stimuli generated by muscle contraction, from early development, with onset of the first embryo movements, and through repair and remodelling in later life. The importance of muscle movement during development is shown by congenital abnormalities where infants that experience reduced movement in the uterus present a sequence of skeletal issues including temporary brittle bones and joint dysplasia. A variety of animal models, utilising different immobilisation scenarios, have demonstrated the precise timing and events that are dependent on mechanical stimulation from movement. This chapter lays out the evidence for skeletal system dependence on muscle movement, gleaned largely from mouse and chick immobilised embryos, showing the many aspects of skeletal development affected. Effects are seen in joint development, ossification, the size and shape of skeletal rudiments and tendons, including compromised mechanical function. The enormous plasticity of the skeletal system in response to muscle contraction is a key factor in building a responsive, functional system. Insights from this work have implications for our understanding of morphological evolution, particularly the challenging concept of emergence of new structures. It is also providing insight for the potential of physical therapy for infants suffering the effects of reduced uterine movement and is enhancing our understanding of the cellular and molecular mechanisms involved in skeletal tissue differentiation, with potential for informing regenerative therapies.

Mechanical stimulation improves rotator cuff tendon-bone healing via activating IL-4/JAK/STAT signaling pathway mediated macrophage M2 polarization

Background

It is well known that appropriate mechanical stimulation benefits tendon-bone (T-B) healing, however, the mechanisms behind this are still uncovered completely. Here, we aimed to explore whether the IL-4/JAK/STAT signaling pathway mediated macrophage polarization was involved in mechanical stimulation induced T-B healing.

Method

C57BL/6 mice rotator cuff (RC) repair model was established, and the mice were randomly allocated to the following group. 1. Mice were allowed for free cage activities after surgery (FC group); 2. Mice received treadmill running initiated on postoperative day 7 (TR group); 3. Mice only received a local injection of hydrogel containing IL-4 neutralizing antibody without postoperative intervention (FC ​+ ​AF-404-SP group); 4. Mice received a local injection of hydrogel containing IL-4 neutralizing antibody and postoperative treadmill running (TR ​+ ​AF-404-SP group). The expression of IL-4 within supraspinatus tendon (SST) enthesis was measured by Enzyme-linked immunosorbent assay (ELISA). In addition, the activation of JAK/STAT signaling pathway in macrophages and identification of macrophage phenotype at the RC insertion site was detected by Flow cytometry and qRT-PCR. T-B healing quality in this RC repair model was evaluated by histological staining, Micro-computed tomography (Micro-CT) scanning, and biomechanical testing.

Result

In this study, using the RC repair model, we confirmed that generation of IL-4, activation of the JAK/STAT signaling pathway in macrophages, the ability of macrophages to polarize towards M2 subtype, and T-B healing quality were significantly enhanced in TR group compared to FC group. When comparing FC ​+ ​AF-404-SP group with TR ​+ ​AF-404-SP group, it was found that the mechanical stimulation induced this effect was depleted following the blockade of the IL-4/JAK/STAT signaling pathway.

Conclusion

Our finding suggested that mechanical stimulation could accelerate T-B healing via activating the IL-4/JAK/STAT signaling pathway that modulates macrophages to polarize towards M2 subtype.

The translational potential of this article

This is the first study to reveal a significant role of mechanical stimulation in the IL-4/JAK/STAT signaling pathway activation and macrophage polarization during RC T-B healing, which highlights the IL-4/JAK/STAT signaling pathway as a potential target to mediate macrophage M2 polarization and improves T-B healing for RC repair.

Mechanoresponsive regulation of fibroblast-to-myofibroblast transition in three-dimensional tissue analogues: mechanical strain amplitude dependency of fibrosis

The spatiotemporal interaction and constant iterative feedback between fibroblasts, extracellular matrix, and environmental cues are central for investigating the fibroblast-induced musculoskeletal tissue regeneration and fibroblast-to-myofibroblast transition (FMT). In this study, we created a fibroblast-laden 3D tissue analogue to study (1) how mechanical loading exerted on three-dimensional (3D) tissues affected the residing fibroblast phenotype and (2) to identify the ideal mechanical strain amplitude for promoting tissue regeneration without initiating myofibroblast differentiation. We applied uniaxial tensile strain (0, 4, 8, and 12%) to the cell-laden 3D tissue analogues to understand the interrelation between the degree of applied mechanical loading amplitudes and FMT. Our data demonstrated that 4% mechanical strain created an anabolic effect toward tissue regeneration, but higher strain amplitudes over-stimulated the cells and initiated fibrotic tissue formation. Under increased mechanical strain amplitudes, fibroblasts were activated from a homeostatic state to a proto-myofibroblast state which resulted in increased cellularity accompanied by increased expressions of extracellular matrix (ECM) components, activation stressors (TGF-β1 and TGF-βR1), and profibrotic markers. This further transformed fibroblasts into α-smooth muscle actin expressing myofibroblasts. Understanding the interplay between the applied degree of mechanical loading exerted on 3D tissues and residing fibroblast phenotypic response is important to identify specific mechanomodulatory approaches for tissue regeneration and the informed mechanotherapy-guided tissue healing strategies.

How does bone microanatomy and musculature covary? An investigation in the forelimb of two species of martens (Martes foina, Martes martes)

The long bones and associated musculature play a prominent role in the support and movement of the body and are expected to reflect the associated mechanical demands. But in addition to the functional response to adaptive changes, the conjoined effects of phylogenetic, structural and developmental constraints also shape the animal's body. In order to minimise the effect of the aforementioned constraints and to reveal the biomechanical adaptations in the musculoskeletal system to locomotor mode, we here study the forelimb of two closely related martens: the arboreal pine marten (Martes martes) and the more terrestrial stone marten (Martes foina), focusing on their forelimb muscle anatomy and long bone microanatomy; and, especially, on their covariation. To do so, we quantified muscle data and bone microanatomical parameters and created 3D and 2D maps of the cortical thickness distribution for the three long bones of the forelimb. We then analysed the covariation of muscle and bone data, both qualitatively and quantitatively. Our results reveal that species-specific muscular adaptations are not clearly reflected in the microanatomy of the bones. Yet, we observe a global thickening of the bone cortex in the radius and ulna of the more arboreal pine marten, as well a stronger flexor muscle inserting on its elbow. We attribute these differences to variation in their locomotor modes. Analyses of our 2D maps revealed a shift of cortical thickness distribution pattern linked to ontogeny, rather than species-specific patterns. We found that although intraspecific variation is not negligible, species distinction was possible when taking muscular and bone microanatomical data into consideration. Results of our covariation analyses suggest that the muscle-bone correlation is linked to ontogeny rather than to muscular strength at zones of insertion. Indeed, if we find a correlation between cortical thickness distribution and the strength of some muscles in the humerus, that is not the case for the others and in the radius and ulna. Cortical thickness distribution appears rather linked to bone contact zones and ligament insertions in the radius and ulna, and to some extent in the humerus. We conclude that inference on muscle from bone microanatomy is possible only for certain muscles in the humerus.

Abaloparatide Improves Rotator Cuff Healing via Anabolic Effects on Bone Remodeling in a Chronic Rotator Cuff Tear Model of Rat With Osteoporosis: A Comparison With Denosumab

BACKGROUND

Because of poor clinical outcomes, rotator cuff healing in patients with osteoporosis has recently gained attention. Antiresorptive therapy for osteoporosis has been reported to improve healing after repair. However, the comparative effectiveness of anabolic and antiresorptive agents has not been investigated.

HYPOTHESIS

Anabolic therapy with abaloparatide (ABL) would outperform antiresorptive therapy with denosumab (Dmab) to improve rotator cuff healing in the osteoporotic status.

STUDY DESIGN

Controlled laboratory study.

METHODS

A chronic rotator cuff tear model was established in ovariectomy-induced postmenopausal osteoporotic rats. Then, bilateral rotator cuff repairs were conducted in all experimental rats, which were randomly divided into control (CON), Dmab, and ABL groups to receive the corresponding subcutaneous injections. The rats sacrificed at 2 weeks (the early healing period) were used to detect osteoblast and osteoclast activities, related gene expression (osteoclastogenesis, osteogenesis, and chondrogenesis), new bone formation, and mineralization. In the rats sacrificed at 4 and 8 weeks, the bone mineral density and bone architecture at the repaired site were assessed by micro-computed tomography, and rotator cuff healing was evaluated using histological and biomechanical analyses.

RESULTS

At 8 weeks, significantly higher failure load and stiffness were observed in the ABL (25.13 ± 3.54 N, P < .001; 21.65 ± 3.08 N/mm, P < .001; respectively), and Dmab (21.21 ± 2.55 N, P < .001; 16.15 ± 2.07 N/mm, P = .008; respectively) groups than in the CON group (13.36 ± 1.70 N; 11.20 ± 2.59 N/mm; respectively), whereas the ABL treatment provided better failure load and stiffness than Dmab (P = .019; P = .003). Although tendon-to-bone healing was improved by Dmab, the most mature tendon insertion at the interface was observed in the ABL group, including a more organized collagen and fibrocartilage and higher bone quality. ABL significantly promoted bone remodeling via coupling between osteoclasts and osteoblasts (osteoblast to osteoclast ratio: 4.80 ± 0.39; P = .022), thereby stimulating more new bone formation and mineralization at the tendon-to-bone healing interface than Dmab (osteoblast to osteoclast ratio: 3.21 ± 0.75) at 2 weeks. Moreover, ABL had significant effects on gene expression [Runt-realted transcription factor 2 (Runx2, collagen type I-alpha 1 (Col1A1]), and sclerostin for osteogenesis; aggrecan and collagen type II (Col2) for chondrogenesis] in mineralized tissues, indicative of enhanced bone and fibrocartilage formation when compared with the CON and Dmab groups.

CONCLUSION

ABL promoted rotator cuff healing in osteoporotic rats by significantly increasing the mineralized tissue quality and collagen maturity at the reattachment site, leading to improved biomechanical properties, and was superior to Dmab in both biomechanical and histological analyses.

CLINICAL RELEVANCE

Anabolic therapy with ABL may outperform antiresorptive therapy with Dmab in improving outcomes after rotator cuff repair in osteoporotic patients.

Effect of Mechanical Stimulation Combined With Platelet-Rich Plasma on Healing of the Rotator Cuff in a Murine Model

BACKGROUND

Mechanical stimulation and platelet-rich plasma (PRP) have been shown to be beneficial for healing of the bone-tendon interface (BTI), but few studies have explored the efficacy of a combination of these applications. We investigated the effect of mechanical stimulation combined with PRP on rotator cuff repair in mice.

HYPOTHESIS

Mechanical stimulation combined with PRP can enhance BTI healing in a murine model of rotator cuff repair.

STUDY DESIGN

Controlled laboratory study.

METHODS

A total of 160 C57BL/6 mice were used. Overall, 40 mice were used to prepare PRP, while 120 mice underwent acute supraspinatus tendon (SST) repair. The animals were randomly assigned to 4 groups: control group, mechanical stimulation group, PRP group, and mechanical stimulation combined with PRP group (combination group). At 4 and 8 weeks postoperatively, animals were sacrificed, the eyeballs were removed to collect blood, and the SST-humeral complexes were collected. Histological, biomechanical, immunological, and bone morphometric tests were performed.

RESULTS

Histologically, at 4 and 8 weeks after surgery, the area of the fibrocartilage layer at the BTI in the combination group was larger than in the other groups. The content and distribution of proteoglycans in this layer in the combination group were significantly greater than in the other groups. At 8 weeks postoperatively, trabecular number, and trabecular bone thickness of the subchondral bone area of interest at the BTI of the combination group were greater than those of the other groups, bone volume fraction of the combination group was greater than the control group. On biomechanical testing at 4 and 8 weeks after surgery, the failure load and ultimate strength of the SST-humeral complex in the combination group were higher than in the other groups. Enzyme-linked immunosorbent assay results showed that, at 4 weeks postoperatively, the serum concentrations of transforming growth factor beta 1 and platelet-derived growth factor (PDGF) in the combination group were significantly higher than in the other groups; at 8 weeks, the PDGF-AB concentration in the combination group was higher than in the control and mechanical stimulation groups.

CONCLUSION

Mechanical stimulation combined with PRP can effectively promote the early stage of healing after a rotator cuff injury.

CLINICAL RELEVANCE

These findings imply that mechanical stimulation combined with PRP can serve as a potential therapeutic strategy for rotator cuff healing.

Comparative Analysis of Preoperative and Postoperative Muscle Mass around Hip Joint by Computed Tomography in Patients with Hip Fracture

Purpose

This study was conducted in order to assess changes in hip muscles by comparing results of preoperative and postoperative computed tomography (CT) in older patients who underwent surgery for treatment of hip fracture.

Materials and Methods

A total of 50 patients (aged ≥65 years) who underwent surgery for treatment of intertrochanteric fractures (25 patients) and femoral neck fractures (25 patients) between February 2013 and February 2019 and underwent preoperative and postoperative pelvic CT were enrolled in the study. The cross-sectional area, attenuation and estimates of muscle mass of the gluteus medius, gluteus minimus, iliopsoas, and rectus femoris on the uninjured side were measured. Basic patient data (sex, age, height, weight, body mass index [BMI], bone mineral density [BMD], Harris hip score [HHS], and length of follow-up) were collected from medical records.

Results

No significant differences in sex, age, height, weight, BMI, BMD, HHS, and length of follow-up were observed between the two groups. No significant difference in the cross-sectional areas and attenuations of gluteus medius and gluteus minimus was observed after surgery; however, a statistically significant decrease was observed in those of iliopsoas and rectus femoris after surgery. Lower estimates with statistical significance of muscle mass of the iliopsoas and rectus femoris were observed on postoperative CT.

Conclusion

Muscle mass of the hip flexor (iliopsoas, rectus femoris) showed significant decreases on postoperative CT compared with preoperative CT. Based on these findings, selective strengthening exercise for hip flexor should be beneficial in rehabilitation of hip fractures.

Toughening mechanisms for the attachment of architectured materials: The mechanics of the tendon enthesis

Architectured materials offer tailored mechanical properties but are limited in engineering applications due to challenges in maintaining toughness across their attachments. The enthesis connects tendon and bone, two vastly different architectured materials, and exhibits toughness across a wide range of loadings. Understanding the mechanisms by which this is achieved could inform the development of engineered attachments. Integrating experiments, simulations, and previously unexplored imaging that enabled simultaneous observation of mineralized and unmineralized tissues, we identified putative mechanisms of enthesis toughening in a mouse model and then manipulated these mechanisms via in vivo control of mineralization and architecture. Imaging uncovered a fibrous architecture within the enthesis that controls trade-offs between strength and toughness. In vivo models of pathology revealed architectural adaptations that optimize these trade-offs through cross-scale mechanisms including nanoscale protein denaturation, milliscale load-sharing, and macroscale energy absorption. Results suggest strategies for optimizing architecture for tough bimaterial attachments in medicine and engineering.

Effect of Exercise Intensity on the Healing of the Bone-Tendon Interface: A Mouse Rotator Cuff Injury Model Study

BACKGROUND

Injuries at the bone-tendon interface (BTI) are common findings in clinical practice. Rehabilitation procedures after BTI surgery are important but are controversial.

PURPOSE

To investigate the effects of different exercise intensities on BTI healing by means of an established mouse rotator cuff injury model.

STUDY DESIGN

Controlled laboratory study.

METHODS

A total of 150 specific pathogen free male C57BL/6 mice, with supraspinatus insertion injury, were randomly assigned to 1 of 5 groups according to postoperative rehabilitation of different exercise intensities: (1) control group, (2) low-intensity exercise group, (3) moderate-intensity exercise group, (4) high-intensity exercise group, and (5) increasing-intensity exercise group (IG). The specimens were harvested 4 or 8 weeks postoperatively for microarchitectural, histological, molecular biological, and mechanical evaluations.

RESULTS

Histological test results showed that the degrees of tissue fusion and polysaccharide protein distribution at the healing interface at 4 and 8 weeks after surgery were significantly better in the IG than in the other 4 groups. Synchrotron radiation micro-computed tomography showed that the quantity of subchondral bone at the enthesis (bone volume/total volume fraction, trabecular thickness, trabecular number) was higher and trabecular separation was lower in the IG than in the other 4 groups. Quantitative reverse transcription polymerase chain reaction (qRT-PCR) analysis revealed that the healing interface in the IG expressed more transcription factors, such as sox 9, runx 2, and scleraxis, than the interfaces in the other groups. Although no significant difference was seen in the cross-sectional area between the groups at postoperative weeks 4 and 8 (P > .05), the tensile load, ultimate strength, and stiffness of the specimens in the IG were significantly better than those in the other 4 groups (P < .05).

CONCLUSION

The rehabilitation program with increasing-intensity exercise was beneficial for BTI healing.

CLINICAL RELEVANCE

The results of this study provide evidence supporting the use of a simple and progressive exercise rehabilitation program after rotator cuff surgery.

Surface metrology of bone surface attachments of knee ligaments

OBJECTIVES

Textural differences between entheses reflect biomechanical activities of the musculoskeletal system. Methods used to measure these surfaces have limitations. Here, the surface metrology of roughness of articular and entheseal surfaces of the knee are investigated with an optical profiler.

METHODS

Osteological specimens of six femora and seven tibiae were prepared from cadavers. Measurements were obtained to surrogate body mass. Specimens were molded with polyvinylsiloxane and casts prepared with resin, which were scanned using a white light optical profiler. Scans were processed by a computer program. Each scan produced 32 variables, categorized into 6 groups for each location.

RESULTS

The distribution of data was mostly normal. Analysis of variance (ANOVA) identified Ssk significant (p-value .002); post hoc Tukey testing indicated significance between femoral PCL and tibial ACL entheses groups (p-value .007), and between tibial ACL and tibial entheses groups (p-value .002) suggesting the ability to differentiate anterior and posterior cruciate ligament entheses. Sku was found significant with a t test between articular and entheseal surfaces. Correlation coefficients were significant between surface metrology parameters and measurements related to body mass.

CONCLUSIONS

This study distinguished differences between entheses of the anterior and posterior cruciate ligaments, with the Ssk parameter most useful. Differences in articular and entheseal surfaces were found with the Sku parameter most useful. Correlations indicated a relationship between body mass and surface metrology parameters. Finally, these findings suggest this method can be used for further investigation of spondyloarthropathies.

Negative impact of disuse and unloading on tendon enthesis structure and function

Exposure to chronic skeletal muscle disuse and unloading that astronauts experience results in muscle deconditioning and bone remodeling. Tendons involved in the transmission of force from muscles to skeleton are also affected. Understanding the changes that occur in muscle, tendon, and bone is an essential step toward limiting or preventing the deleterious effects of chronic reduction in mechanical load. Numerous reviews have reported the effects of this reduction on both muscle and bone, and to a lesser extent on the tendon. However, none focused on the tendon enthesis, the tendon-to-bone attachment site. While the enthesis structure appears to be determined by mechanical stress, little is known about enthesis plasticity. Our review first looks at the relationship between entheses and mechanical stress, exploring how tensile and compressive loads determine and influence enthesis structure and composition. The second part of this review addresses the deleterious effects of skeletal muscle disuse and unloading on enthesis structure, composition, and function. We discuss the possibility that spaceflight-induced enthesis remodeling could impact both the capacity of the enthesis to withstand compressive stress and its potential weakness. Finally, we point out how altered compressive strength at entheses could expose astronauts to the risk of developing enthesopathies.

Bringing tendon biology to heel: Leveraging mechanisms of tendon development, healing, and regeneration to advance therapeutic strategies

Tendons are specialized matrix-rich connective tissues that transmit forces from muscle to bone and are essential for movement. As tissues that frequently transfer large mechanical loads, tendons are commonly injured in patients of all ages. Following injury, mammalian tendons heal poorly through a slow process that forms disorganized fibrotic scar tissue with inferior biomechanical function. Current treatments are limited and patients can be left with a weaker tendon that is likely to rerupture and an increased chance of developing degenerative conditions. More effective, alternative treatments are needed. However, our current understanding of tendon biology remains limited. Here, we emphasize why expanding our knowledge of tendon development, healing, and regeneration is imperative for advancing tendon regenerative medicine. We provide a comprehensive review of the current mechanisms governing tendon development and healing and further highlight recent work in regenerative tendon models including the neonatal mouse and zebrafish. Importantly, we discuss how present and future discoveries can be applied to both augment current treatments and design novel strategies to treat tendon injuries.

Regional muscle changes in adult dysfunctional hip conditions of femoroacetabular impingement and hip dysplasia

OBJECTIVE

To analyze regional muscle CT density and bulk in femoroacetabular impingement (FAI) and hip dysplasia (HD) versus controls.

MATERIALS AND METHODS

Patients who obtained perioperative CT imaging for FAI and HD before surgery were retrospectively studied. Asymptomatic controls included for comparison. Two readers independently evaluated regional hip muscle [iliopsoas (IP), rectus femoris (RF), gluteus minimus (Gm), and medius (GM)] density, muscle area, and muscle circumference. Inter-observer reliability calculated using intra-class correlation coefficient (ICC).

RESULTS

A consecutive series of 25 FAI patients, 16 HD patients, and 38 controls were recruited in the study. FAI patients had significantly greater Gm and GM circumferences as well as greater RF and IP areas on the normal side compared to the asymptomatic control group (p values 0.004, 0.032, 0.033, and 0.028, respectively). In addition, Gm and RF circumferences and RF area were significantly larger (p values 0.029, 0.036, and 0.014, respectively) in FAI patients on the affected side compared to the control group. HD patients had significantly smaller Gm and GM circumferences on the affected side than normal side measurements in FAI group (p values 0.043 and 0.003, respectively). Normal side GM circumference was also smaller in HD patients than normal side FAI hips (p value 0.02). There was no significant difference between the measurements on normal and abnormal sides in each disease group. No significant difference was found between measurements of HD compared to controls (p > 0.05). No muscle density differences were seen among different groups. There was moderate to excellent inter-reader reliability for all measurements except Gm muscle density.

CONCLUSIONS

Muscle analysis was able to quantify differences among patients with FAI, HD, and asymptomatic controls. These changes could indicate either a muscle imbalance contributing to the pathology or disuse atrophy, which may have implications for specific muscle-strengthening therapies and rehabilitation procedures in such patients.

Molecular Basis for Periodontal Ligament Adaptation to In Vivo Loading

A soft food diet leads to changes in the periodontal ligament (PDL). These changes, which have been recognized for more than a century, are ascribed to alterations in mechanical loading. While these adaptive responses have been well characterized, the molecular, cellular, and mechanical mechanisms underlying the changes have not. Here, we implicate Wnt signaling in the pathoetiology of PDL responses to underloading. We show that Wnt-responsive cells and their progeny in the PDL space exhibit a burst in proliferation in response to mastication. If an animal is fed a soft diet from the time of weaning, then this burst in Wnt-responsive cell proliferation is quelled; as a consequence, both the PDL and the surrounding alveolar bone undergo atrophy. Returning these animals to a hard food diet restores the Wnt signaling in PDL. These data provide, for the first time, a molecular mechanism underlying the adaptive response of the PDL to loading.

The multiscale structural and mechanical effects of mouse supraspinatus muscle unloading on the mature enthesis

The musculoskeletal system is sensitive to its loading environment; this is of particular concern under conditions such as disuse, paralysis, and extended-duration space flight. Although structural and mechanical changes to tendon and bone following paralysis and disuse are well understood, there is a pressing need to understand how this unloading affects the bone-tendon interface (enthesis); the location most prone to tears and injury. We therefore elucidated these effects of unloading in the entheses of adult mice shoulders that were paralyzed for 21 days by treatment with botulinum toxin A. Unloading significantly increased the extent of mechanical failure and was associated with structural changes across hierarchical scales. At the millimeter scale, unloading caused bone loss. At the micrometer scale, unloading decreased bioapatite crystal size and crystallographic alignment in the enthesis. At the nanometer scale, unloading induced compositional changes that stiffened the bioapatite/collagen composite tissue. Mathematical modeling and mechanical testing indicated that these factors combined to increase local elevations of stress while decreasing the ability of the tissue to absorb energy prior to failure, thereby increasing injury risk. These first observations of the multiscale effects of unloading on the adult enthesis provide new insight into the hierarchical features of structure and composition that endow the enthesis with increased resistance to failure. STATEMENT OF SIGNIFICANCE: The musculoskeletal system is sensitive to its loading environment; this is of particular concern under conditions such as disuse, paralysis, and extended-duration space flight. Although changes to tendon and bone following paralysis are understood, there is a pressing need to clarify how unloading affects the bone-tendon interface (enthesis), which is the location most prone to tears and injury. We elucidated the effects of enthesis unloading in adult mice shoulders showing, for the first time, that unloading significantly increased the risk and extent of mechanical failure and was associated with structural changes across hierarchical scales. These observations provide new insight into the hierarchical features of structure and composition that endow the enthesis with resilience. This knowledge can be used to develop more targeted treatments to improve mobility and function.

Neuromuscular dysfunction, independent of gait dysfunction, modulates trabecular bone homeostasis in mice

OBJECTIVES

To clarify the effects of neuromuscular dysfunction on hindlimb loading, muscle atrophy, and bone homeostasis.

METHODS

We quantified changes to hindlimb loading, muscle atrophy, and bone morphology following either Botulinum toxin A (BTxA) induced muscle paralysis or peripheral nerve injury (PNI) in mice; two in vivo models that we anticipated would differently alter gait and mechanical loading patterns due to their distinct effects on neuromuscular signaling. To confirm the expected behavioral effects of PNI, we assessed mechanical allodynia of the ipsilateral hindlimb using von Frey testing and activity (distance traveled and speed) was monitored in both groups using open field testing. Peak vertical ground reaction forces (GRF) and ankle and knee kinematics during normal locomotion were quantified and used to estimate peak mid-diaphyseal normal strains. Muscle atrophy and trabecular and cortical bone morphology were assessed via high-resolution microCT imaging.

RESULTS

BTxA-induced calf paralysis caused severe muscle atrophy and altered gait kinetics and kinematics and reduced gait-induced normal strains. PNI increased mechanical allodynia but did not alter gait, nor did it cause muscle atrophy. We observed that muscle paralysis and PNI both led to severe trabecular bone loss but only BTxA-induced paralysis increased cortical bone resorption.

CONCLUSIONS

While mechanical stimuli clearly have essential functions in bone development and adaptation, these data emphasize that neuromuscular signaling, independent of load-induced mechanical strains, may modulate trabecular bone homeostasis in normal and disease states.

Mechanical force regulates tendon extracellular matrix organization and tenocyte morphogenesis through TGFbeta signaling

Mechanical forces between cells and extracellular matrix (ECM) influence cell shape and function. Tendons are ECM-rich tissues connecting muscles with bones that bear extreme tensional force. Analysis of transgenic zebrafish expressing mCherry driven by the tendon determinant scleraxis reveals that tendon fibroblasts (tenocytes) extend arrays of microtubule-rich projections at the onset of muscle contraction. In the trunk, these form a dense curtain along the myotendinous junctions at somite boundaries, perpendicular to myofibers, suggesting a role as force sensors to control ECM production and tendon strength. Paralysis or destabilization of microtubules reduces projection length and surrounding ECM, both of which are rescued by muscle stimulation. Paralysis also reduces SMAD3 phosphorylation in tenocytes and chemical inhibition of TGFβ signaling shortens tenocyte projections. These results suggest that TGFβ, released in response to force, acts on tenocytes to alter their morphology and ECM production, revealing a feedback mechanism by which tendons adapt to tension.

Changing While Staying the Same: Preservation of Structural Continuity During Limb Evolution by Developmental Integration

More than 150 years since Charles Darwin published "On the Origin of Species", gradual evolution by natural selection is still not fully reconciled with the apparent sudden appearance of complex structures, such as the bat wing, with highly derived functions. This is in part because developmental genetics has not yet identified the number and types of mutations that accumulated to drive complex morphological evolution. Here, we consider the experimental manipulations in laboratory model systems that suggest tissue interdependence and mechanical responsiveness during limb development conceptually reduce the genetic complexity required to reshape the structure as a whole. It is an exciting time in the field of evolutionary developmental biology as emerging technical approaches in a variety of non-traditional laboratory species are on the verge of filling the gaps between theory and evidence to resolve this sesquicentennial debate.

How weakness of the tensor fascia lata and gluteus maximus may contribute to ACL injury: A new theory

Anterior cruciate ligament (ACL) injuries are common in sports including a significant failure rate following reconstruction. The iliotibial band (ITB) is an important stabilizer of the lateral portion of the knee and also an important lateral rotator of the tibia. Both the tensor fascia lata (TFL) and gluteus maximus (Gmax) muscles insert into the ITB proximally. This paper describes a theory that implicates weakened TFL and Gmax muscles as possible contributors to anterolateral rotatory instability. If the TFL and Gmax are important contributors to anterolateral rotatory instability, physical therapists can emphasize assessing for their weakness and developing a rehabilitation program to restore their strength.

Assembly, maturation, and degradation of the supraspinatus enthesis

The development of the rotator cuff enthesis is still poorly understood. The processes in the early and late developmental steps are gradually elucidated, but it is still unclear how cell activities are coordinated during development and maturation of the structured enthesis. This review summarizes current knowledge about development and age-related degradation of the supraspinatus enthesis. Healing and repair of an injured and degenerated supraspinatus enthesis also remain a challenge, as the original graded transitional tissue of the fibrocartilaginous insertion is not re-created after the tendon is surgically reattached to bone. Instead, mechanically inferior and disorganized tissue forms at the healing site because of scar tissue formation. Consequently, the enthesis never reaches mechanical properties comparable to those of the native enthesis. So far, no novel biologic healing approach has been successful in enhancing healing of the injured enthesis. The results revealed in this review imply the need for further research to pave the way for better treatment of patients with rotator cuff disorder.

Time-Dependent Changes in the Structure of Calcified Fibrocartilage in the Rat Achilles Tendon-Bone Interface With Sciatic Denervation

The enthesis transmits a physiological load from soft to hard tissue via fibrocartilage. The histological alterations induced by this physiological loading remain unclear. This study was performed to examine the histomorphological alterations in the collagen fiber bundle alignment and depth of collagen interdigitation between the calcified fibrocartilage and the bone. We examined the Achilles enthesis of rats with sciatic denervation to explore the mechanical effects of structural changes in the enthesis. The parallelism of the collagen fiber bundles was significantly reduced 8 weeks after denervation. However, the depth of collagen interdigitation significantly increased at 2 and 4 weeks after denervation and then significantly decreased 8 weeks after denervation. In conclusion, a lack of muscle loading induced structural alterations in the distal calcified fibrocartilage. These findings suggest that while structural changes in the enthesis are necessary for the development of physiological loading, structural deformities are required in the long term. Anat Rec, 300:2166-2174, 2017. © 2017 Wiley Periodicals, Inc.

Effects of spaceflight on the muscles of the murine shoulder

Mechanical loading is necessary for the development and maintenance of the musculoskeletal system. Removal of loading via microgravity, paralysis, or bed rest leads to rapid loss of muscle mass and function; however, the molecular mechanisms that lead to these changes are largely unknown, particularly for the spaceflight (SF) microgravity environment. Furthermore, few studies have explored these effects on the shoulder, a dynamically stabilized joint with a large range of motion; therefore, we examined the effects of microgravity on mouse shoulder muscles for the 15-d Space Transportation System (STS)-131, 13-d STS-135, and 30-d Bion-M1 missions. Mice from STS missions were euthanized within 4 h after landing, whereas mice from the Bion-M1 mission were euthanized within 14 h after landing. The motion-generating deltoid muscle was more sensitive to microgravity than the joint-stabilizing rotator cuff muscles. Mice from the STS-131 mission exhibited reduced myogenic (Myf5 and -6) and adipogenic (Pparg, Cebpa, and Lep) gene expression, whereas either no change or an increased expression of these genes was observed in mice from the Bion-M1 mission. In summary, muscle responses to microgravity were muscle-type specific, short-duration SF caused dramatic molecular changes to shoulder muscles and responses to reloading upon landing were rapid.-Shen, H., Lim, C., Schwartz, A. G., Andreev-Andrievskiy, A., Deymier, A. C., Thomopoulos, S. Effects of spaceflight on the muscles of the murine shoulder.

The Rotator Cuff Organ: Integrating Developmental Biology, Tissue Engineering, and Surgical Considerations to Treat Chronic Massive Rotator Cuff Tears

The torn rotator cuff remains a persistent orthopedic challenge, with poor outcomes disproportionately associated with chronic, massive tears. Degenerative changes in the tissues that comprise the rotator cuff organ, including muscle, tendon, and bone, contribute to the poor healing capacity of chronic tears, resulting in poor function and an increased risk for repair failure. Tissue engineering strategies to augment rotator cuff repair have been developed in an effort to improve rotator cuff healing and have focused on three principal aims: (1) immediate mechanical augmentation of the surgical repair, (2) restoration of muscle quality and contractility, and (3) regeneration of native enthesis structure. Work in these areas will be reviewed in sequence, highlighting the relevant pathophysiology, developmental biology, and biomechanics, which must be considered when designing therapeutic applications. While the independent use of these strategies has shown promise, synergistic benefits may emerge from their combined application given the interdependence of the tissues that constitute the rotator cuff organ. Furthermore, controlled mobilization of augmented rotator cuff repairs during postoperative rehabilitation may provide mechanotransductive cues capable of guiding tissue regeneration and restoration of rotator cuff function. Present challenges and future possibilities will be identified, which if realized, may provide solutions to the vexing condition of chronic massive rotator cuff tears.

Skeletal muscle Ca(2+) mishandling: Another effect of bone-to-muscle signaling

Our appreciation of crosstalk between muscle and bone has recently expanded beyond mechanical force-driven events to encompass a variety of signaling factors originating in one tissue and communicating to the other. While the recent identification of new 'myokines' has shifted some focus to the role of muscle in this partnership, bone-derived factors and their effects on skeletal muscle should not be overlooked. This review summarizes some previously known mediators of bone-to-muscle signaling and also recent work identifying a new role for bone-derived TGF-β as a cause of skeletal muscle weakness in the setting of cancer-induced bone destruction. Oxidation of the ryanodine receptor/calcium release channel (RyR1) in skeletal muscle occurs via a TGF-β-Nox4-RyR1 axis and leads to calcium mishandling and decreased muscle function. Multiple points of potential therapeutic intervention were identified, from preventing the bone destruction to stabilizing the RYR1 calcium channel. This new data reinforces the concept that bone can be an important source of signaling factors in pathphysiological settings.

Scleraxis is required for the development of a functional tendon enthesis

The attachment of dissimilar materials is a major engineering challenge, yet this challenge is seemingly overcome in biology. This study aimed to determine how the transcription factor Scleraxis (Scx) influences the development and maturation of the tendon-to-bone attachment (enthesis). Mice with conditional knockout (cKO) for Scx (Scx(flx/-), Prx1Cre(+)) and wild-type [(WT) Scx(flx/+) or Scx(flx/flx)] littermates were killed at postnatal days 7-56 (P7-P56). Enthesis morphometry, histology, and collagen alignment were investigated throughout postnatal growth. Enthesis tensile mechanical properties were also assessed. Laser microdissection of distinct musculoskeletal tissues was performed at P7 for WT, cKO, and muscle-unloaded (botulinum toxin A treated) attachments for quantitative PCR. cKO mice were smaller, with altered bone shape and impaired enthesis morphology, morphometry, and organization. Structural alterations led to altered mechanical properties; cKO entheses demonstrated reduced strength and stiffness. In P7 attachments, cKO mice had reduced expression of transforming growth factor (TGF) superfamily genes in fibrocartilage compared with WT mice. In conclusion, deletion of Scx led to impairments in enthesis structure, which translated into impaired functional (i.e., mechanical) outcomes. These changes may be driven by transient signaling cues from mechanical loading and growth factors.

Patterns of activity adaptation in humeral trabecular bone in Neolithic humans and present-day people

OBJECTIVE

The annual turnover rate of trabecular bone by far exceeds that of cortical bone and, therefore, is very sensitive to its daily loading regime. Here we test the hypothesis that the study of the trabecular bone architecture of the human humerus is able to differentiate between different habitual manual activities.

MATERIALS AND METHODS

For this purpose, we compared the trabecular architecture of the humeral head in a Neolithic population to that of a sample of contemporary Europeans using micro-computed tomography (microCT). We defined in each specimen a spherical volume of interest with a diameter of 57.5 ± 2.5% of the maximal diameter of the humeral head to metrically analyze the bulk of humeral head trabecular architecture. We subsequently quantified the trabecular architectures in the VOIs, measuring seven standard 3D-morphometric parameters, and used univariate and multivariate statistical analyses for comparisons within and between populations.

RESULTS

Univariate statistical analysis showed significant differences in a combination of 3D-morphometric parameters. A principal components analysis of the 3D-morphometrics of the trabecular architectures separated the Neolithic from the contemporary samples on the basis of differences in their gross trabecular architecture, including differences in the bone volume fraction (BV/TV), the number of trabeculae per unit length (Tb N), and the distance between trabeculae (Tb Sp).

DISCUSSION

We interpret the significant differences found in the humeral trabecular bone of the Neolithic and the contemporary group as likely reflecting the distinct manual working routines. The trabecular bone configuration in the Neolithic sample shows presumably functional signatures of prehistoric subsistence techniques and activity levels.

Gdf5 progenitors give rise to fibrocartilage cells that mineralize via hedgehog signaling to form the zonal enthesis

The sequence of events that leads to the formation of a functionally graded enthesis is not clearly defined. The current study demonstrates that clonal expansion of Gdf5 progenitors contributes to linear growth of the enthesis. Prior to mineralization, Col1+ cells in the enthesis appose Col2+ cells of the underlying primary cartilage. At the onset of enthesis mineralization, cells at the base of the enthesis express alkaline phosphatase, Indian hedgehog, and ColX as they mineralize. The mineralization front then extends towards the tendon midsubstance as cells above the front become encapsulated in mineralized fibrocartilage over time. The hedgehog (Hh) pathway regulates this process, as Hh-responsive Gli1+ cells within the developing enthesis mature from unmineralized to mineralized fibrochondrocytes in response to activated signaling. Hh signaling is required for mineralization, as tissue-specific deletion of its obligate transducer Smoothened in the developing tendon and enthesis cells leads to significant reductions in the apposition of mineralized fibrocartilage. Together, these findings provide a spatiotemporal map of events - from expansion of the embryonic progenitor pool to synthesis of the collagen template and finally mineralization of this template - that leads to the formation of the mature zonal enthesis. These results can inform future tendon-to-bone repair strategies to create a mechanically functional enthesis in which tendon collagen fibers are anchored to bone through mineralized fibrocartilage.

Optical anisotropy reveals molecular order in a mouse enthesis

Entheses are specialized biological structures that functionally anchor tendons to bones. The complexity, mechanical characteristics and properties of the entheses, particularly those related to exercise, mechanical load and pathologies, have been extensively analyzed; however, the macromolecular organization of the enthesis fibers, as assessed by polarization microscopy, has not yet been investigated. Morphological and optical anisotropy characteristics, such as birefringence, linear dichroism (LD) and differential interference contrast (DIC-PLM) properties, are thus analyzed in this study of a healthy adult mouse calcaneal tendon-bone enthesis. The molecular and supramolecular order of collagen and GAGs was determined for the collagen bundles of this enthesis. Based on a birefringence plot pattern as well as on metachromasy and linear dichroism after toluidine blue staining at pH 4.0, a similarity between the calcaneal tendon-bone enthesis and cartilage during ossification may be assumed. This similarity is assumed to favor the adequacy of this enthesis to support a compressive load. Considering that the collagen-proteoglycan complexes and the enthesis fibers themselves have a chiral nature, these structures could be acting via reciprocal signaling with the cellular environment of the enthesis.