Strategies for the hypothermic preservation of cell sheets of human adipose stem cells

Prevascularized spongy-like hydrogels maintain their angiogenic potential after prolonged hypothermic storage

The chronic shortage of organs and tissues for transplantation represents a dramatic burden on healthcare systems worldwide. Tissue engineering offers a potential solution to address these shortages, but several challenges remain, with prevascularization being a critical factor for in vivo survival and integration of tissue engineering products. Concurrently, a different challenge hindering the clinical implementation of such products, regards their efficient preservation from the fabrication site to the bedside. Hypothermia has emerged as a potential solution for this issue due to its milder effects on biologic systems in comparison with other cold preservation methodologies. Its impact on prevascularization, however, has not been well studied. In this work, 3D prevascularized constructs were fabricated using adipose-derived stromal vascular fraction cells and preserved at 4 °C using Hypothermosol or basal culture media (α-MEM). Hypothermosol efficiently preserved the structural and cellular integrity of prevascular networks as compared to constructs before preservation. In contrast, the use of α-MEM led to a clear reduction in prevascular structures, with concurrent induction of high levels of apoptosis and autophagy at the cellular level. In vivo evaluation using a chorioallantoic membrane model demonstrated that, in opposition to α-MEM, Hypothermosol preservation retained the angiogenic potential of constructs before preservation by recruiting a similar number of blood vessels from the host and presenting similar integration with host tissue. These results emphasize the need of studying the impact of preservation techniques on key properties of tissue engineering constructs such as prevascularization, in order to validate and streamline their clinical application.

Cryopreservation: A Comprehensive Overview, Challenges, and Future Perspectives

Cryopreservation is the most prevalent method of long-term cell preservation. Effective cell cryopreservation depends on freezing, adequate storage, and correct thawing techniques. Recent advances in cryopreservation techniques minimize the cellular damage which occurs while processing samples. This article focuses on the fundamentals of cryopreservation techniques and how they can be implemented in a variety of clinical settings. The article presents a brief description of each of the standard cryopreservation procedures, such as slow freezing and vitrification. Alongside that, the membrane permeating and nonpermeating cryoprotectants are briefly discussed, along with current advancements in the field of cryopreservation and variables influencing the cryopreservation process. The diminution of cryoinjury incurred by the cell via the resuscitation process will also be highlighted. In the end application of cryopreservation techniques in many fields, with a special emphasis on stem cell preservation techniques and current advancements presented. Furthermore, the challenges while implementing cryopreservation and the futuristic scope of the fields are illustrated herein. The content of this review sheds light on various ways to enhance the output of the cell preservation process and minimize cryoinjury while improving cell revival.

Feline ovarian tissue vitrification: The effect of fragment size and base medium on follicular viability and morphology

To achieve optimal vitrification, tissue structure and fragment size represent a challenge for obtaining sufficient cooling velocity. Theoretically, thin ovarian tissue fragments lead to higher surface contact, hence higher solute penetration. Another critical factor is the concentration of cryoprotectants (CPA): CPA toxicity may occur with high concentrations, and as such, this may induce local apoptosis. Therefore two experiments were conducted: In experiment I, we compared the effect of sucrose supplementation in vitrification solution along with ovarian fragments of different sizes on post-warming tissue viability and follicle architecture. Fragments of two different sizes, with a thickness and radius of 1.5 × 0.75 mm and 3 × 1.5 mm respectively were vitrified in vitrification solution without sucrose and with 0.5 M sucrose supplementation. Post-warming, fragments of ovarian tissue (fresh and vitrified) were evaluated for viability (Calcein AM/Propidium Iodide) and for morphology (hematoxylin-eosin). In experiment II, we aimed to reduce cryoprotectant toxicity by using lower CPA concentrations in combination with an optimized carrier medium (HypThermosol®; HTS). Ovarian tissue fragments were randomly allocated to five groups (A: fresh controls; B: vitrified in GLOBAL® TOTAL® LP w/HEPES with 15% ethylene glycol (EG) and 15% DMSO; C: vitrified in HTS with 5% EG and 5% DMSO; D: vitrified in HTS with 10% EG and 10% DMSO; E: vitrified in HTS with 15% EG and 15% DMSO). Fragments (fresh and vitrified) were evaluated for morphology (hematoxylin-eosin) and for apoptosis through the activity of caspase-3. Results showed that follicular morphology was affected by the size of the fragment; smaller sized fragments contained a greater proportion of intact follicles (53.8 ± 2.0%) compared to the larger fragments (40.3 ± 2.0%). Our results demonstrated that 1.5 × 0.75 mm sized pieces vitrified in a vitrification solution supplemented with 0.5 M sucrose had more intact follicles (54.8 ± 1.3%; P = 0.0002) after vitrification. In addition, HTS presented no additional protective effect as a base medium, neither for follicular morphology nor apoptotic rate.

Hypothermic Preservation of Adipose-Derived Mesenchymal Stromal Cells as a Viable Solution for the Storage and Distribution of Cell Therapy Products

Cell and gene therapies (CGT) have reached new therapeutic targets but have noticeably high prices. Solutions to reduce production costs might be found in CGT storage and transportation since they typically involve cryopreservation, which is a heavily burdened process. Encapsulation at hypothermic temperatures (e.g., 2-8 °C) could be a feasible alternative. Adipose tissue-derived mesenchymal stromal cells (MSC(AT)) expanded using fetal bovine serum (FBS)- (MSC-FBS) or human platelet lysate (HPL)-supplemented mediums (MSC-HPL) were encapsulated in alginate beads for 30 min, 5 days, and 12 days. After bead release, cell recovery and viability were determined to assess encapsulation performance. MSC identity was verified by flow cytometry, and a set of assays was performed to evaluate functionality. MSC(AT) were able to survive encapsulated for a standard transportation period of 5 days, with recovery values of 56 ± 5% for MSC-FBS and 77 ± 6% for MSC-HPL (which is a negligible drop compared to earlier timepoints). Importantly, MSC function did not suffer from encapsulation, with recovered cells showing robust differentiation potential, expression of immunomodulatory molecules, and hematopoietic support capacity. MSC(AT) encapsulation was proven possible for a remarkable 12 day period. There is currently no solution to completely replace cryopreservation in CGT logistics and supply chain, although encapsulation has shown potential to act as a serious competitor.

Long-term and short-term preservation strategies for tissue engineering and regenerative medicine products: state of the art and emerging trends

There is an ever-growing need of human tissues and organs for transplantation. However, the availability of such tissues and organs is insufficient by a large margin, which is a huge medical and societal problem. Tissue engineering and regenerative medicine (TERM) represent potential solutions to this issue and have therefore been attracting increased interest from researchers and clinicians alike. But the successful large-scale clinical deployment of TERM products critically depends on the development of efficient preservation methodologies. The existing preservation approaches such as slow freezing, vitrification, dry state preservation, and hypothermic and normothermic storage all have issues that somehow limit the biomedical applications of TERM products. In this review, the principles and application of these approaches will be summarized, highlighting their advantages and limitations in the context of TERM products preservation.

Mineralized collagen as a bioactive ink to support encapsulation of human adipose stem cells: A step towards the future of bone regeneration

Bioprinting - printing with incorporated living cells - has earned special attention on tissue engineering approaches, aiming to closer reproduce the 3D microenvironment of the target tissue. However, it raises extra complexity related to the need to use cell-friendly printing conditions that still comply with material printing fidelity. Inspired by the composite nano structural organization of mineralized tissues, this work reports the efficiency of the chemical approach followed to in situ mineralize blue shark skin collagen, at a nano scale level, to ultimately produce stable inks. The influence of initial cellular density was evaluated by assessing three different concentrations (2.5, 5 and 7.5 × 10⁶ cells·ml^-1) of human adipose stem cells (hASC), with the higher density of encapsulated cells presenting improved viability in a long culture term. Immunodetection of osteogenic-related markers, like RUNX2 and osteopontin, 21 days after cell culture in basal conditions confirmed the potential of the ink to be applied for osteogenic purposes, which may be associated with the success of the cell-to-ink interaction and the Ca²⁺ ions released from the co-precipitated hydroxyapatite. A combination of mineralized shark collagen, alginate and hASC is thus proposed as a bioactive bioink with potential properties for regeneration of bone tissue.

Hypothermic Stem Cell Storage Using a Polypeptide Thermogel

We report a polypeptide-based thermogel as a new tool for hypothermic storage of stem cells at ambient temperature (25 °C). Stem cells were suspended in the sol state (10 °C) of an aqueous poly(ethylene glycol)-poly(l-alanine) (PEG-PA) solution (4.0 wt %) in phosphate-buffered saline (PBS), which turned into a stem cell-incorporated gel by a heat-induced sol-to-gel transition. The cell harvesting procedure from the thermogels was simply performed through a gel-to-sol transition by diluting and cooling the system. More than 99% of stem cells died in PBS and Pluronic F127 thermogel (control thermogel) when the cells were stored at 25 °C for 7 days. The cell recovery rate from the PEG-PA thermogel (64%) was significantly greater than that from the commercially available HypoThermosol FRS preservation solution (HTS) (26%). Additionally, the surviving stem cells from the PEG-PA thermogel were healthier than those from HTS in terms of (1) expression of stemness biomarkers (NANOG, OCT4, and SOX2), (2) proliferation rate, and (3) differentiation potentials into osteogenic, chondrogenic, and adipogenic lineages. Membrane stabilization was suggested as a cell protection mechanism in the cytocompatible PEG-PA thermogel. The PEG-PA thermogel provides a convenient cytocompatible way for the storage and recovery of cells and thus is a promising tool for the transportation and short-term banking of cells.

Macroscopic, Histologic, and Immunomodulatory Response of Limb Wounds Following Intravenous Allogeneic Cord Blood-Derived Multipotent Mesenchymal Stromal Cell Therapy in Horses

Limb wounds are common in horses and often develop complications. Intravenous multipotent mesenchymal stromal cell (MSC) therapy is promising but has risks associated with intravenous administration and unknown potential to improve cutaneous wound healing. The objectives were to determine the clinical safety of administering large numbers of allogeneic cord blood-derived MSCs intravenously, and if therapy causes clinically adverse reactions, accelerates wound closure, improves histologic healing, and alters mRNA expression of common wound cytokines. Wounds were created on the metacarpus of 12 horses. Treatment horses were administered 1.51-2.46 × 10⁸ cells suspended in 50% HypoThermosol FRS, and control horses were administered 50% HypoThermosol FRS alone. Epithelialization, contraction, and wound closure rates were determined using planimetric analysis. Wounds were biopsied and evaluated for histologic healing characteristics and cytokine mRNA expression. Days until wound closure was also determined. The results indicate that 3/6 of treatment horses and 1/6 of control horses experienced minor transient reactions. Treatment did not accelerate wound closure or improve histologic healing. Treatment decreased wound size and decreased all measured cytokines except transforming growth factor-β3. MSC intravenous therapy has the potential to decrease limb wound size; however, further work is needed to understand the clinical relevance of adverse reactions.

Advanced biomaterials in cell preservation: Hypothermic preservation and cryopreservation

Cell-based medicine has made great advances in clinical diagnosis and therapy for various refractory diseases, inducing a growing demand for cell preservation as support technology. However, the bottleneck problems in cell preservation include low efficiency and poor biocompatibility of traditional protectants. In this review, cell preservation technologies are categorized according to storage conditions: hypothermic preservation at 1 °C~35 °C to maintain short-term cell viability that is useful in cell diagnosis and transport, while cryopreservation at -196 °C~-80 °C to maintain long-term cell viability that provides opportunities for therapeutic cell product storage. Firstly, the background and developmental history of the protectants used in the two preservation technologies are briefly introduced. Secondly, the progress in different cellular protection mechanisms for advanced biomaterials are discussed in two preservation technologies. In hypothermic preservation, the hypothermia-induced and extracellular matrix-loss injuries to cells are comprehensively summarized, as well as the recent biomaterials dependent on regulation of cellular ATP level, stabilization of cellular membrane, balance of antioxidant defense system, and supply of mimetic ECM to prolong cell longevity are provided. In cryopreservation, cellular injuries and advanced biomaterials that can protect cells from osmotic or ice injury, and alleviate oxidative stress to allow cell survival are concluded. Last, an insight into the perspectives and challenges of this technology is provided. We envision advanced biocompatible materials for highly efficient cell preservation as critical in future developments and trends to support cell-based medicine. STATEMENT OF SIGNIFICANCE: Cell preservation technologies present a critical role in cell-based applications, and more efficient biocompatible protectants are highly required. This review categorizes cell preservation technologies into hypothermic preservation and cryopreservation according to their storage conditions, and comprehensively reviews the recently advanced biomaterials related. The background, development, and cellular protective mechanisms of these two preservation technologies are respectively introduced and summarized. Moreover, the differences, connections, individual demands of these two technologies are also provided and discussed.

Microtubule Stabilization Protects Hypothermia-Induced Damage to the Cytoskeleton and Barrier Integrity of the Corneal Endothelial Cells

Purpose: To determine the impact of hypothermia on the barrier function of donor corneal endothelium, thereby enhancing the success of corneal transplantation. Methods: Primary cultures of porcine endothelial cells were subjected to hypothermia (15 h; 4°C). The impact on microtubule assembly, peri-junctional actomyosin ring (PAMR), and ZO-1 was assessed by immunocytochemistry with and without pretreatment with a microtubule-stabilizing agent (Epothilone B; EpoB; 100 nM) and a p38 MAP kinase inhibitor (SB-203580; 20 μM). In addition, EpoB-loaded PLGA nanoparticles (ENPs) prepared by nanoprecipitation technique and coated with poly-L-lysine (PLL-ENPs) were administered one-time for sustained intracellular delivery of EpoB. Results: Exposure to hypothermia led to microtubule disassembly concomitant with the destruction of PAMR and the displacement of ZO-1 at the cellular periphery, suggesting a loss in barrier integrity. These adverse effects were attenuated by pretreatment with EpoB or SB-203580. PLL-ENPs possessed a zeta potential of ∼26 mV and a size of ∼110 nm. Drug loading and entrapment efficiency were 5% (w/w) and ∼87%, respectively, and PLL-ENPs showed a biphasic release in vitro: burst phase (1 day), followed by a sustained phase (∼4 weeks). Pretreatment with PLL-ENPs (0.4 mg/mL) for 24 h stabilized the microtubules and opposed the hypothermia-induced damage to PAMR and the redistribution of ZO-1. Conclusions: Hypothermia induces microtubule disassembly via activation of p38 MAP kinase and subsequently breaks down the barrier function of the endothelium. Sustained intracellular delivery of EpoB using nanoparticles has the potential to overcome endothelial barrier failure during prolonged cold storage of donor cornea.

A Roadmap to Cardiac Tissue-Engineered Construct Preservation: Insights from Cells, Tissues, and Organs

Worldwide, over 26 million patients suffer from heart failure (HF). One strategy aspiring to prevent or even to reverse HF is based on the transplantation of cardiac tissue-engineered (cTE) constructs. These patient-specific constructs aim to closely resemble the native myocardium and, upon implantation on the diseased tissue, support and restore cardiac function, thereby preventing the development of HF. However, cTE constructs off-the-shelf availability in the clinical arena critically depends on the development of efficient preservation methodologies. Short- and long-term preservation of cTE constructs would enable transportation and direct availability. Herein, currently available methods, from normothermic- to hypothermic- to cryopreservation, for the preservation of cardiomyocytes, whole-heart, and regenerative materials are reviewed. A theoretical foundation and recommendations for future research on developing cTE construct specific preservation methods are provided. Current research suggests that vitrification can be a promising procedure to ensure long-term cryopreservation of cTE constructs, despite the need of high doses of cytotoxic cryoprotective agents. Instead, short-term cTE construct preservation can be achieved at normothermic or hypothermic temperatures by administration of protective additives. With further tuning of these promising methods, it is anticipated that cTE construct therapy can be brought one step closer to the patient.

Biopreservation of living tissue engineered nerve grafts

Tissue engineered nerve grafts (TENGs) built from living neurons and aligned axon tracts offer a revolutionary new approach as "living scaffolds" to bridge major peripheral nerve defects. Clinical application, however, necessitates sufficient shelf-life to allow for shipping from manufacturing facility to clinic as well as storage until use. Here, hypothermic storage in commercially available hibernation media is explored as a potential biopreservation strategy for TENGs. After up to 28 days of refrigeration at 4℃, TENGs maintain viability and structure in vitro. Following transplantation into 1 cm rat sciatic defects, biopreserved TENGs routinely survive and persist for at least 2 weeks and recapitulate pro-regenerative mechanisms of fresh TENGs, including the ability to recruit regenerating host tissue into the graft and extend neurites beyond the margins of the graft. The protocols and timelines established here serve as important foundational work for the manufacturing, storage, and translation of other neuron-based tissue engineered therapeutics.

Effect of Sperm Concentration and Storage Temperature on Goat Spermatozoa during Liquid Storage

The use of cooled semen is relatively common in goats. There are a number of advantages of cooled semen doses, including easier handling of artificial insemination (AI) doses, transport, more AI doses per ejaculate, and higher fertility rates in comparison with frozen AI doses. However, cooled semen has a short shelf life. The objective of this study was to examine the effect of temperature and sperm concentration on the in vitro sperm quality during liquid storage for 48 h, including sperm motility and kinetics, response to oxidation, mitochondrial membrane potential (MMP) and DNA fragmentation in goats. Three experiments were performed. In the first, the effects of liquid preservation of semen at different temperatures (5 °C or 17 °C), durations (0, 24 and 48 h) and sperm concentrations (250 × 10⁶ sperm/mL (1:2 dilution rate), 166.7 × 10⁶ sperm/mL (1:3 dilution rate) or 50 × 10⁶ sperm/mL (1:10 dilution rate)) on sperm motility and kinetics were studied. In the second experiment, the effect of temperature, sperm washing and concentration on sperm motility and DNA fragmentation was studied. Finally, the effect of sperm concentration and duration of storage at 5 °C on sperm motility, response to oxidative stress and MMP was examined. We found that refrigerated liquid storage of goat sperm impaired sperm quality, such as motility, MMP and response to oxidation, as storage time increased; however, sperm DNA fragmentation index was not significantly affected. Liquid storage at 5 °C preserved higher total motility than at 17 °C. Moreover, we observed that the reduction of sperm concentration below 500 × 10⁶ sperm/mL did not seem to improve the quality of spermatozoa conserved in milk-based extender in the conditions tested.