Comparative statistical analysis of the release kinetics models for nanoprecipitated drug delivery systems based on poly(lactic-co-glycolic acid)

Dynamic Release from Acetalated Dextran Nanoparticles for Precision Therapy of Inflammation

Polymer-based nanoparticles (NPs) that react to altered physiological characteristics have the potential to enhance the delivery of therapeutics to a specific area. These materials can utilize biochemical triggers, such as low pH, which is prone to happen locally in an inflammatory microenvironment due to increased cellular activity. This reduced pH is neutralized when inflammation subsides. For precise delivery of therapeutics to match this dynamic reaction, drug delivery systems (DDS) need to not only release the drug (ON) but also stop the release (OFF) autonomously. In this study, we use a systematic approach to optimize the composition of acetalated dextran (AcDex) NPs to start (ON) and stop (OFF) releasing model cargo, depending on local pH changes. By mixing ratios of AcDex polymers (mixed NPs), we achieved a highly sensitive material that was able to rapidly release cargo when going from pH 7.4 to pH 6.0. At the same time, the mix also offered a stable composition that enabled a rapid ON/OFF/ON/OFF switching within this narrow pH range in only 90 min. These mixed NPs were also sensitive to biological pH changes, with increased release in the presence of inflammatory cells compared to healthy cells. Such precise and controllable characteristics of a DDS position mixed NPs as a potential treatment platform to inhibit disease flare-ups, reducing both systemic and local side effects to offer a superior treatment option for inflammation compared to conventional systems.

Incorporation of Inclusion Complexes in the Dissolvable Microneedle Ocular Patch System for the Efficiency of Fluconazole in the Therapy of Fungal Keratitis

Fluconazole (FNL) is one of the first-line treatments for fungal keratitis as it is an effective broad-spectrum antimicrobial commonly administered orally or topically. However, FNL has a very low water solubility, limiting its drug formulation, therapeutic application, and bioavailability through tissues. To overcome these limitations, this study aimed to develop FNL inclusion complexes (FNL-IC) with cyclodextrin (α-cyclodextrin, sulfobutylether-β-cyclodextrin, and hydroxypropyl-γ cyclodextrin) and incorporate it into a dissolvable microneedle (DMN) system to improve solubility and drug penetration. FNL-IC was evaluated for saturation solubility, Fourier transform infrared spectroscopy, differential scanning calorimetry, in vitro release, minimum inhibitory concentration, minimum fungicidal concentration, and time-killing assay. DMN-FNL-IC was evaluated for mechanical and insertion properties, surface pH, moisture absorption ability, water vapor transmission, and drug content recovery. Moreover, ocular kinetic, ex vivo antimicrobial, in vivo antifungal, and chorioallantoic membrane (HET-CAM) assays were conducted to assess the overall performance of the formulation. Mechanical strength and insertion properties revealed that DMN-FNL-IC has great mechanical and insertion properties. The in vitro release of FNL-IC was significantly improved, exhibiting a 9-fold increase compared to pure FNL. The ex vivo antifungal activity showed significant inhibition of Candida albicans from 6.54 to 0.73 log cfu/mL or 100-0.94%. In vivo numbers of colonies of 0.87 ± 0.13 log cfu/mL (F2), 4.76 ± 0.26 log cfu/mL (FNL eye drops), 3.89 ± 0.24 log cfu/mL (FNL ointments), and 8.04 ± 0.58 log cfu/mL (control) showed the effectiveness of DMN preparations against other standard commercial preparations. The HET-CAM assay showed that DMN-FNL-IC (F2) did not show any vascular damage. Finally, a combination of FNL-IC and DMN was developed appropriately for ocular delivery of FNL, which was safe and increased the effectiveness of treatments for fungal keratitis.

Evaluating the application of an arabinoxylan-rich fraction from brewers' spent grain as a release modifier of drugs

This study evaluated the possible use of a fraction of brewers' spent grain rich in arabinoxylans (BSG-AX) as an excipient that modifies the release of class III drugs (Biopharmaceutics Classification System), by determining the release profile of metformin hydrochloride (MH), in a water medium. The cumulative percentage of MH release showed the best linear fit when modeled with the cumulative distribution function (CDF) of the Weibull distribution (R2 = 0.993 ± 0.001). According to the Korsmeyer-Peppas model, the first stage of MH release is regulated by a super case-II transport mechanism controlled by the expansion and relaxation of BSG-AX. Finally, with the Hixson-Crowell model, a release rate (k HC ) of 0.350 ± 0.026 h - 1 3 was obtained (R2 = 0.996 ± 0.007). BSG-AX constitutes a suitable material for producing prolonged drug release vehicles; however, additional research is required to provide a better encapsulation of the active ingredients to ensure their optimal applicability and performance.

An enhanced cardio-protective effect of nanoparticles loaded with active components from Polygonum orientale L. against isoproterenol-induced myocardial ischemia in rats

In this study, nanoparticles loaded with active components from Polygonum orientale L. (PO), a traditional Chinese herb known for its anti-myocardial ischemic properties, were investigated for cardio-protective properties. Specifically, OVQ-Nanoparticles (OVQ-NPs) with Orientin (Ori), Vitexin (Vit), and Quercetin (Que) was obtained by double emulsion-solvent evaporation method. The OVQ-NPs exhibited a spherical shape, with a uniform size distribution of 136.77 ± 3.88 nm and a stable ζ-potential of -13.40 ± 2.24 mV. Notably, these nanoparticles exhibited a favorable sustained-release characteristic, resulting in an extended circulation time within the living organism. Consequently, the administration of these nanoparticles resulted in significant improvements in electrocardiograms and heart mass index of myocardial ischemic rats induced by isoproterenol, as well as decreased serum levels of CK, LDH, and AST. Furthermore, the results of histopathological examination, such as H&E staining and TUNEL staining, confirmed a reduced level of cardiac tissue pathology and apoptosis. Moreover, the quantification of biochemical indicators (SOD, MDA, GSH, NO, TNF-α, and IL-6) demonstrated that OVQ-NPs effectively mitigated myocardial ischemia by regulating oxidative stress and inflammatory pathways. In conclusion, OVQ-NPs demonstrate promising therapeutic potential as an intervention for myocardial ischemia, providing a new perspective on traditional Chinese medicine treatment in this area.

Dual Drug Delivery for Augmenting Bacterial Wound Complications via Tailored Ultradeformable Carriers

Addressing the complex challenge of healing of bacterially infected wounds, this study explores the potential of lipid nanomaterials, particularly advanced ultradeformable particles (UDPs), to actively influence the wound microenvironment. The research introduces a novel therapeutic approach utilizing silver sulfadiazine (SSD) coupled with vitamin E (VE) delivered through UDPs (ethosomes/transferosomes/transethosomes). Comparative physicochemical characterization of these nanosized drug carriers reveals the superior stability of transethosomes, boasting a zeta potential of -36.5 mV. This method demonstrates reduced side effects compared to conventional therapies, with almost 90% SSD and 72% VE release achieved in wound pH in a sustained manner. Cytotoxicity assessment shows 60% cell viability even at the highest concentration (175 μg/mL), while hemolysis test demonstrates RBC lysis below 5% at a concentration of 250 μg/mL. Vitamin E-SSD-loaded transethosomes (VSTEs) significantly enhance cellular migration and proliferation, achieving 95% closure within 24 h, underscoring their promising efficacy. The synergistic method effectively reduces bacterial burden, evidenced by an 80% reduction in Escherichia coli and Staphylococcus aureus within the wound microenvironment. This approach offers a promising strategy to address complications associated with skin injuries.

Comparative Fitting of Mathematical Models to Carvedilol Release Profiles Obtained from Hypromellose Matrix Tablets

The mathematical models available in DDSolver were applied to experimental dissolution data obtained by analysing carvedilol release from hypromellose (HPMC)-based matrix tablets. Different carvedilol release profiles were generated by varying a comprehensive selection of fillers and carvedilol release modifiers in the formulation. Model fitting was conducted for the entire relevant dissolution data, as determined by using a paired t-test, and independently for dissolution data up to approximately 60% of carvedilol released. The best models were selected based on the residual sum of squares (RSS) results used as a general measure of goodness of fit, along with the utilization of various criteria for visual assessment of model fit and determination of the acceptability of estimated model parameters indicating burst release or lag time concerning experimental dissolution results and previous research. In addition, a model-dependent analysis of carvedilol release mechanisms was carried out.

Ocular Mucoadhesive and Biodegradable Sponge-Like Inserts for the Sustained and Controlled Delivery of Voriconazole; Preparation, D-optimal Factorial Optimization and in-vivo Evaluation

The aim of this study was to formulate and optimize by statistical means mucoadhesive and biodegradable sponge-like inserts loaded with voriconazole (VCZ) which increases the contact time of the drug with the eye and sustain its release from the formula in a controlled manner. This avoids the pulsed effect reported for the drug suspension and results in reducing the number of drug instillations in the eye with the result of enhancing the patient compliance. Also, the sponge like nature of the insert reduces the foreign body sensation caused by other ocular solid dosage forms. They were prepared using casting/freeze-drying technique using five polymers namely high molecular weight chitosan (CH), sodium alginate (AL), sodium carboxy methyl cellulose (CMC), gellan gum (GG) and xanthan gum (XG). The prepared inserts were subjected to evaluations of their visual appearance, weight variation, drug content, surface pH, in-vitro release (percent drug released after 1h (Q1 (%)), mean dissolution time (MDT) and dissolution efficiency (DE)) in addition to kinetic analysis of the release data, water uptake, mucoadhesion and rheology of the forming plain polymer solution at the maximum rate of shear. The independent variables of the D-optimal factorial design were the polymer type and concentration while Q1 (%), MDT, DE, % water uptake after 15 minutes and rheology at the maximum rate of shear were chosen as dependant variables. The performed optimization process using design expert software showed an optimum formula consisting of 2 % GG. It showed slow release behavior compared to the drug suspension. FTIR and DSC studies showed that there is no interaction between VCZ and GG. The optimum formula has good in-vitro mucoadhesive properties and pH in the safe ocular range. Moreover, it showed promising in-vivo results of rapid hydration and gelling in addition to good mucoadhesive behavior when instilled in the eye, high ocular safety and biocompatibility, sustained antifungal activity in comparison to the drug suspension and finally biodegradation. So, it may be taken into consideration as an outstanding carrier for the ocular delivery of VCZ.

Improving therapeutic potential in breast cancer via histone deacetylase inhibitor loaded nanofibrils

Epigenetic modifications play a significant role in cancer progression, making them potential targets for therapy. Histone deacetylase inhibitors have shown promise in inhibiting cancer cell growth, including in breast cancer (BC). In this research, we examined the potential of using suberoyl anilide hydroxamic acid (SAHA)-loaded β-lg nanofibrils as a drug delivery system for triple-negative BC cell lines. We assessed their impact on cell cycle progression, apoptosis, levels of reactive oxygen species, and mitochondrial membrane potential in cancer cells. The combination of SAHA and β-lg nanofibrils demonstrated enhanced efficacy in inhibiting cell growth, inducing cell cycle arrest, and promoting apoptosis (43.78%) compared to SAHA alone (40.09%). Moreover, it effectively targeted cancer cells without promoting drug resistance while using a low concentration of the nanofibrils. These findings underscore the promising potential of nanofibril-based drug delivery systems for BC treatment.

pH-sensitive nanoparticles of enhanced epigallocatechin-3-gallate in colorectal cancer therapy

Aim: Encapsulating epigallocatechin-3-gallate (EGCG) in pH-sensitive polymeric nanoparticles for targeted delivery of drugs could revolutionize colorectal cancer treatment. Materials & methods: Nanoparticles were synthesized to release drugs at colon pH. Dynamic light scattering measured their average diameter and ζ-potential, while differential scanning calorimetry and x-ray diffraction assessed EGCG encapsulation. Results: The nanoparticles showed stability and bioavailability in the gastrointestinal tract, efficiently encapsulating and releasing over 93% of EGCG at pH 7.2. They enhanced cytotoxicity against HT-29 cells and demonstrated antibacterial properties, increasing apoptosis and cell cycle arrest. Conclusion: The study underscores the potential of nanoparticles in enhancing EGCG delivery for colorectal cancer therapy, aiming to minimize side effects and improve therapeutic outcomes.

Pharmacokinetic Interpretation of Applying Local Drug Delivery System for the Treatment of Deep Surgical Site Infection in the Spine

Surgical site infections (SSIs) after spinal surgery present significant challenges, including poor antibiotic penetration and biofilm formation on implants, leading to frequent treatment failures. Polymethylmethacrylate (PMMA) is widely used for localized drug delivery in bone infections, yet quantifying individual drug release kinetics is often impractical. This retrospective study analyzed 23 cases of deep SSIs (DSSIs) following spinal surgery treated with antibiotic-loaded PMMA. A mathematical model estimated personalized drug release kinetics from PMMA, considering disease types, pathogens, and various antibiotics. The study found that vancomycin (VAN), ceftriaxone (CRO), and ceftazidime (CAZ) reached peak concentrations of 15.43%, 15.42%, and 15.41%, respectively, within the first two days, which was followed by a lag phase (4.91-4.92%) on days 2-3. On days 5-7, concentrations stabilized, with CRO at 3.22% and CAZ/VAN between 3.63% and 3.65%, averaging 75.4 µg/cm2. Key factors influencing release kinetics include solubility, diffusivity, porosity, tortuosity, and bead diameter. Notably, a patient with a low glomerular filtration rate (ASA IV) was successfully treated with a shortened 9-day intravenous VAN regimen, avoiding systemic complications. This study affirms the effectiveness of local drug delivery systems (DDS) in treating DSSIs and underscores the value of mathematical modeling in determining drug release kinetics. Further research is essential to optimize release rates and durations and to mitigate risks of burst release and tissue toxicity.

Facile fabrication of an extended-release tablet of Ticagrelor using three dimensional printing technology

The objective of the study was to fabricate tailored extended-release tablets of blood thinner Ticagrelor as once-daily dosing using additive manufacturing for better compliance in heart failure therapy. The solid work design of the tablet was printed using hot melt extrusion (HME) based 3D printing by optimized mixture of Eudragit RS-100, plasticizer and drug for producing extrudable and printable filaments. FTIR and TGA results showed no covalent interaction among ingredients and no decomposition during HME process, respectively. Friability, weight variation, assay and content uniformity tests met USP requirements, while the mean hardness of the tablets was calculated in a value between 40 and 50 kg. According to DSC and XRD results, the crystallinity state of the Ticagrelor was converted to an amorphous one in the tablet matrix. Smooth surfaces with multiple deposited layers were observed using SEM. In comparison, the maximum Ticagrelor release of 100% after 120 min from Brilinta® tablets was decreased to 97% in 400 min from the 3D tablet at infill of 90%. Korsmeyer-Peppas kinetic model showed the drug release mechanism is affected by diffusion and swelling. In general, fabrication of the extended-release 3D printed tablet of Ticagrelor using HME-based-additive manufacturing has the potential to provide specific doses with tailored kinetic release for personalized medicine, improving adherence at point-of-care.

Application of chitosan and other biopolymers based edible coatings containing essential oils as green and innovative strategy for preservation of perishable food products: A review

Deterioration of perishable foods due to fungal contamination and lipid peroxidation are the most threatened concern to food industry. Different chemical preservatives have been used to overcome these constrains; however their repetitive use has been cautioned owing to their negative impact after consumption. Therefore, attention has been paid to essential oils (EOs) because of their natural origin and proven antifungal and antioxidant activities. Many EO-based formulations have been in use but their industrial-scale application is still limited, possibly due to its poor solubility, vulnerability towards oxidation, and aroma effect on treated foods. In this sense, active food packaging using biopolymers could be considered as promising approach. The biopolymers can enhance the stability and effectiveness of EOs through controlled release, thus minimizes the deterioration of foods caused by fungal pathogens and oxidation without compromising their sensory properties. This review gives a concise appraisal on latest advances in active food packaging, particularly developed from natural polymers (chitosan, cellulose, cyclodextrins etc.), characteristics of biopolymers, and current status of EOs. Then, different packaging and their effectiveness against fungal pathogens, lipid-oxidation, and sensory properties with recent previous works has been discussed. Finally, effort was made to highlights their safety and commercialization aspects towards market solutions.

Kinetic modelling of ultrasound-triggered chemotherapeutic drug release from the surface of gold nanoparticles

Therapeutic ultrasound can be used to trigger the on-demand release of chemotherapeutic drugs from gold nanoparticles (GNPs). In the previous work, our group achieved doxorubicin (DOX) release from the surface of GNPS under low-intensity pulsed ultrasound (LIPUS) exposure. However, the specific release kinetics of ultrasound-triggered DOX release from GNPs is not known. Here, we present a release kinetics study of DOX from GNPs under ultrasound exposure for the first time. A novel dialysis membrane setup was designed to quantify DOX release from LIPUS-activated GNPs at 37.0 °C and 43.4 °C (hyperthermia temperature range). Contributions of thermal and non-thermal mechanisms of LIPUS-triggered DOX release were also quantified. Non-thermal mechanisms accounted for 40 ± 7% and 34 ± 5% of DOX release for 37.0 °C and 43.4 °C trials, respectively. DOX release under LIPUS exposure was found to follow Korsmeyer-Peppas (K-P) kinetics, suggesting a shift from a Fickian (static) to a non-Fickian (dynamic) release profile with the addition of non-thermal interactions. DOX release was attributed to an anomalous diffusion release mechanism from the GNP surface. A finite element model was also developed to quantify the acoustic radiation force, believed to be the driving force of non-thermal DOX release inside the dialysis bag.

Layer-by-layer assembly of poly-l-lysine/hyaluronic acid protein reservoirs on poly(glycerol sebacate) surfaces

The modification of biomaterial surfaces has become increasingly relevant in the context of ongoing advancements in tissue engineering applications and the development of tissue-mimicking polymer materials. In this study, we investigated the layer-by-layer (LbL) deposition of polyelectrolyte multilayer protein reservoirs consisting of poly-l-lysine (PLL) and hyaluronic acid (HA) on the hydrophobic surface of poly(glycerol sebacate) (PGS) elastomer. Using the methods of isothermal titration calorimetry and surface plasmon resonance, we systematically investigated the interactions between the polyelectrolytes and evaluated the deposition process in real time, providing insight into the phenomena associated with film assembly. PLL/HA LbL films deposited on PGS showed an exceptional ability to incorporate bone morphogenetic protein-2 (BMP-2) compared to other growth factors tested, thus highlighting the potential of PLL/HA LbL films for osteoregenerative applications. The concentration of HA solution used for film assembly did not affect the thickness and topography of the (PLL/HA)10 films, but had a notable impact on the hydrophilicity of the PGS surface and the BMP-2 release kinetics. The release kinetics were successfully described using the Weibull model and hyperbolic tangent function, underscoring the potential of these less frequently used models to compare the protein release from LbL protein reservoirs.

3D printed pH-responsive tablets containing N-acetylglucosamine-loaded methylcellulose hydrogel for colon drug delivery applications

The pH-responsive drug release approach in combination with three-dimensional (3D) printing for colon-specific oral drug administration can address the limitations of current treatments such as orally administered solid tablets. Such existing treatments fail to effectively deliver the right drug dosage to the colon. In order to achieve targeted drug release profiles, this work aimed at designing and producing 3D printed tablet shells using Eudragit® FS100 and polylactic acid (PLA) where the core was filled with 100 µl of N-acetylglucosamine (GlcNAc)-loaded methyl cellulose (MC) hydrogel. To meet the requirements of such tablets, the effects of polymer blending ratios and MC concentrations on physical, thermal, and material properties of various components of the tablets and most importantly in vitro drug release kinetics were investigated. The tablets with 80/20 wt% of Eudragit® FS100/PLA and the drug-loaded hydrogel with 30 mg/ml GlcNAc and 3% w/v MC showed the most promising results having the best printability, processability, and drug release kinetics besides being non-cytotoxic. Manufacturing of these tablets will be the first milestone in shifting from the conventional "one size fits all" approach to personalized medicine where different dosages and various combinations of drugs can be effectively delivered to the inflammation site.

Antiproliferative Imidazo-Pyrazole-Based Hydrogel: A Promising Approach for the Development of New Treatments for PLX-Resistant Melanoma

Aiming at developing a dermal formulation against melanoma, the synthesized imidazo-pyrazoles 2-phenyl-2,3-dihydro-1H-imidazo[1,2-b]pyrazole-7-carboxylic acid (3-methoxy-4-phenoxy-benzylidene)-hydrazide (4G) and 2-phenyl-2,3-dihydro-1H-imidazo[1,2-b]pyrazole-7-carboxylic acid (4-benzyloxy-3-methoxy-benzylidene)-hydrazide (4I) were screened on patient-isolated melanoma cells (MEOV NT) and on Vemurafenib (PLX4032)-resistant (MEOV PLX-R) ones. Since 4I on MEOV PLX-R cells was 1.4-fold more effective than PLX, a hydrogel formulation containing 4I (R4HG-4I) was prepared in parallel with an empty R4-based hydrogel (R4HG) using a synthesized antibacterial resin (R4) as gelling agent. Thanks to its high hydrophilicity, porosity (85%), and excellent swelling capability (552%), R4 allowed to achieve R4HG and R4HG-4I with high equilibrium degree of swelling (EDS) and equilibrium water content (EWC). Chemometric-assisted ATR-FTIR analyses confirmed the chemical structure of swollen and fully dried (R4HG-D and R4HG-4I-D) hydrogels. The morphology of R4HG-D and R4HG-4I-D was examined by optical microscopy and SEM, while UV-vis analyses were carried out to obtain the drug loading (DL%) and the encapsulation efficiency (EE%) of R4HG-4I. Potentiometric titrations were performed to determine the equivalents of NH3+ in both R4HG and R4HG-4I. The swelling and water release profiles of both materials and related kinetics were assessed by equilibrium swelling rate and water loss studies, respectively, while their biodegradability over time was assessed by in vitro degradation experiments determining their mass loss. Rheological experiments established that both R4HG and R4HG-4I are shear-thinning Bingham pseudoplastic fluids with low yield stress, thus assuring easy spreadability in a future topical application. Release studies evidenced a sustained and quantitative release of 4I governed mainly by diffusion. Upon favorable results from further experiments in a more realistic 3D model of melanoma, R4HG-4I could represent a starting point to develop new topical therapeutic options to adjuvate the treatments of melanoma cells also when resistant to currently available drugs.

Synthesis & characterization of novel MIP with RAFT polymerization of (2-hydroxy ethyl methacrylate)/chitosan as a nanocarrier for drug delivery applications

The primary function of the drug delivery system is to transfer various drugs to certain parts of the body. The drug is transferred reliably in the molecularity imprinted system, based on adjusting the drug release mechanism to control the drug amount and treatment duration. Molecular Imprinting Technology can provide an efficient polymer system to detect bioactive molecules and has high adsorption capacity as drug delivery carriers. This study developed a nanocarrier of molecular imprinted polymer (MIP) of poly (2-hydroxy ethyl methacrylate)/chitosan nanocomposite and also evaluated their performance for drug loading and release in the buffer blood medium. Nanocarriers were prepared based on the RAFT polymerization technique, and cefixime was applied to evaluate the load and release of drugs in nanocarriers. Crucial parameters such as the ratio of imprinted to functional monomer and also the ratio of functional monomer to cross-link should be assessed to obtain the best performance of the MIP. Each of these parameters was studied for four different ratios. TEM analysis showed that the particle size of optimum MIP was between 15 and 20 nm. The specific surface area of CH-CEMIP (chitosan-cefixime MIP) and CEMIP (cefixime MIP) samples were 7.53 and 6.32 m2/g, respectively. Comparing these amounts and the specific surface area of the (Non-Imprinted) NIP sample (1.87 m2/g) indicated that special diagnostic pores were generated. In the drug loading process, the CH-CEMIP sample with 82 mg/g could link to the drug more than CEMIP and NIP samples due to its high selectivity property. Furthermore, according to the drug release experiments, the CH-CEMIP sample performed better in 250 h as 84 % of cefixime in this duration was released slowly and steadily.

Drug delivery based on a supramolecular chemistry approach by using chitosan hydrogels

Microbial infections are a serious healthcare related problem, causing several complications and even death. That is why, the development of new drug delivery systems with prolonged effect represents an interesting research topic. This study presents the synthesis and characterization of new hydrogels based on chitosan and three halogenated monoaldehydes. Further, the hydrogels were used as excipients for the development of drug delivery systems (DDS) by the incorporation of fluconazole, an antifungal drug. The systems were structurally characterized by Fourier Transformed Infrared Spectroscopy and Nuclear Magnetic Resonance, both methods revealing the formation of the imine linkages between chitosan and the aldehydes. The samples presented a high degree of ordering at supramolecular level, as demonstrated by WXRD and POM and a good water-uptake, reaching a maximum of 1.6 g/g. The obtained systems were biodegradable, loosing between 38 and 49 % from their initial mass in the presence of lysozyme in 21 days. The ability to release the antifungal drug in a sustained manner for seven days, along with the high values of the inhibition zone diameter, reaching a maximum of 64 mm against Candida parapsilosis for the chlorine containing sample, recommend these systems as promising materials for bioapplications.

Preparation and characterization of solid lipid nanoparticles incorporating bioactive coumarin analogues as photosensitizing agents

Daphnetin (7,8-dihydroxy-coumarin, DAPH) is a naturally occurring coumarin presenting a wide array of biological activities. In the present study, daphnetin and its novel synthetic analogue 7,8-dihydroxy-4-methyl-3-(4-hydroxyphenyl)-coumarin (DHC) were encapsulated in solid lipid nanoparticles (SLNs) with Encapsulation Efficiency values of 80% and 40%, respectively. Nanoparticles of an average hydrodynamic diameter of approximately 250 nm were formed, showing a good stability in aqueous dispersion (polydispersity index 0.3-0.4), as determined by Dynamic Light Scattering (DLS). The SLNs were also characterized using Fourier Transform-Infrared (FT-IR) spectroscopy and Thermogravimetric Analysis (TGA). TEM images of the blank-SLNs indicated a spherical morphology and a size of 20-50 nm. The release studies of the coumarin analogues indicated a non-Fickian diffusion mechanism, while the release profiles better fitted on the Higuchi kinetic model. Moreover, the coumarin analogues and their SLNs were examined for their antioxidant activity using DPPH and anti-lipid peroxidation assays, exhibiting stronger antioxidant activity when encapsulated than in their free form. The coumarin derivatives and their SLNs were examined for their photodynamic therapy (PDT) efficacy against the human squamous carcinoma A431 cell line, with DHC coumarin both in its free and encapsulated form exhibiting significant PDT activity, reducing the cell viability to 11% after irradiation with a fluence rate of 2.16 J/cm2. Finally, the intracellular localization studies indicated the enhanced cellular uptake of the coumarin analogues when loaded in the SLNs.

Chitosan Nanoparticles for Gastroesophageal Reflux Disease Treatment

Gastroesophageal Reflux Disease (GERD) is a chronic ailment that results from the backward flow of stomach acid into the esophagus, causing heartburn and acid regurgitation. This review explores nanotechnology as a novel treatment approach for GERD. Chitosan nanoparticles (CSNPs) offer several advantages, including biocompatibility, biodegradability, and targeted drug delivery capabilities. CSNPs have been extensively studied due to their ability to encapsulate and release medications in a controlled manner. Different nanoparticle (NP) delivery systems, including gels, microspheres, and coatings, have been developed to enhance drug retention, drug targeting, and controlled release in the esophagus. These nanoparticles can target specific molecular pathways associated with acid regulation, esophageal tissue protection, and inflammation modulation. However, the optimization of nanoparticle formulations faces challenges, including ensuring stability, scalability, and regulatory compliance. The future may see CSNPs combined with other treatments like proton pump inhibitors (PPIs) or mucosal protectants for a synergistic therapeutic approach. Thus, CSNPs provide exciting opportunities for novel GERD treatment strategies.

Modification of Poly(Glycerol Adipate) with Tocopherol and Cholesterol Modulating Nanoparticle Self-Assemblies and Cellular Responses of Triple-Negative Breast Cancer Cells to SN-38 Delivery

This study aimed to fabricate new variations of glycerol-based polyesters by grafting poly(glycerol adipate) (PGA) with hydrophobic bioactive moieties, tocopherol (TOC), and cholesterol (CHO). Their effects on nanoparticle (NP) formation, drug release, and cellular responses in cancer and normal cells were evaluated. CHO and TOC were successfully grafted onto PGA backbones with 30% and 50% mole grafting. Increasing the percentage of mole grafting in both molecules increased the glass transition temperature and water contact angle of the final polymers but decreased the critical micelle concentration of the formulated particles. PGA-TOC NPs reduced the proliferation of MDA-MB-231 cancer cells. However, they enhanced the proliferation of primary dermal fibroblasts within a specific concentration range. PGA-CHO NPs minimally affected the growth of cancer and normal cells. Both types of NPs did not affect apoptosis or the cell cycle of cancer cells. PGA-CHO and PGA-TOC NPs were able to entrap SN-38, a hydrophobic anticancer drug, with a particle size <200 nm. PGA-CHO NPs had a higher drug loading capacity and a greater drug release than PGA-TOC NPs. However, SN-38-loaded PGA-TOC NPs showed higher toxicity than SN-38 and SN-38-loaded PGA-CHO NPs due to the combined effects of antiproliferation and higher cellular uptake. Compared with SN-38, the drug-loaded NPs more profoundly induced sub-G1 in the cell cycle analysis and apoptosis of cancer cells in a similar pattern. Therefore, PGA-CHO and PGA-TOC polymers have potential applications as delivery systems for anticancer drugs.

Influence of Electrospun Fibre Secondary Morphology on Antibiotic Release Kinetic and Its Impact on Antimicrobic Efficacy

Vascular graft infections are a severe complication in vascular surgery, with a high morbidity and mortality. Prevention and treatment involve the use of antibiotic- or antiseptic-impregnated artificial vascular grafts, but currently, there are no commercially available infection-proof small-diameter vascular grafts (SDVGs). In this work we investigated the antimicrobic activity of two SDVGs prototypes loaded with tobramycin and produced via the electrospinning of drug-doped PLGA (polylactide-co-glycolide) solutions. Differences in rheological and conductivity properties of the polymer solutions resulted in non-identical fibre morphology that deeply influenced the hydration profile and consequently the in vitro cumulative drug release, which was investigated by using a spectrofluorimetric technique. Using DDSolver Excel add-in, modelling of the drug release kinetic was performed to evaluate the release mechanism involved: Prototype 1 showed a sustained and diffusive driven drug release, which allowed for the complete elution of tobramycin within 2 weeks, whereas Prototype 2 resulted in a more extended drug release controlled by both diffusion and matrix relaxation. Time-kill assays performed on S. aureus and E. coli highlighted the influence of burst drug release on the decay rate of bacterial populations, with Prototype 1 being more efficient on both microorganisms. Nevertheless, both prototypes showed good antimicrobic activity over the 5 days of in vitro testing.

Nanocomposite Hydrogel Films Based on Sequential Interpenetrating Polymeric Networks as Drug Delivery Platforms

In this study, novel materials have been obtained via a dual covalent and ionic crosslinking strategies, leading to the formation of a fully interpenetrated polymeric network with remarkable mechanical performances as drug delivery platforms for dermal patches. The polymeric network was obtained by the free-radical photopolymerization of N-vinylpyrrolidone using tri(ethylene glycol) divinyl ether as crosslinker in the presence of sodium alginate (1%, weight%). The ionic crosslinking was achieved by the addition of Zn2+, ions which were coordinated by the alginate chains. Bentonite nanoclay was incorporated in hydrogel formulations to capitalize on its mechanical reinforcement and adsorptive capacity. TiO2 and ZnO nanoparticles were also included in two of the samples to evaluate their influence on the morphology, mechanical properties and/or the antimicrobial activity of the hydrogels. The double-crosslinked nanocomposite hydrogels presented a good tensile resistance (1.5 MPa at 70% strain) and compression resistance (12.5 MPa at a strain of 70%). Nafcillin was loaded into nanocomposite hydrogel films with a loading efficiency of up to 30%. The drug release characteristics were evaluated, and the profile was fitted by mathematical models that describe the physical processes taking place during the drug transfer from the polymer to a PBS (phosphate-buffered saline) solution. Depending on the design of the polymeric network and the nanofillers included, it was demonstrated that the nafcillin loaded into the nanocomposite hydrogel films ensured a high to moderate activity against S. aureus and S. pyogenes and no activity against E. coli. Furthermore, it was demonstrated that the presence of zinc ions in these polymeric matrices can be correlated with the inactivation of E. coli.

LIPUS-S/B@NPs regulates the release of SDF-1 and BMP-2 to promote stem cell recruitment-osteogenesis for periodontal bone regeneration

Purpose: Poly (lactic-co-glycolic acid)-based nanoparticles (PLGA NPs) have been widely used as the carrier for sustainable drug delivery. However, the drug release from the NPs was usually incomplete and uncontrollable. Herein, a low intensity pulsed ultrasound (LIPUS) assisted SDF-1/BMP-2@nanoparticles (S/B@NPs) system was fabricated to facilitate stem cell recruitment-osteogenesis for periodontal bone regeneration. Methods: In this work, S/B@NPs were prepared with double-emulsion synthesis method. Then the S/B release profile from NPs was evaluated with or without low intensity pulsed ultrasound treatment. Afterwards, the stem cell recruiting and osteoinductive capacities of LIPUS-S/B@NPs were detected with human periodontal ligament cells (hPDLCs) in vitro and in a rat periodontal bone defect model. Results: The results indicated that S/B@NPs were successfully prepared and LIPUS could effectively regulate the release of S/B and increase their final releasing amount. Moreover, LIPUS-S/B@NPs system significantly promoted hPDLCs migrating and osteogenesis in vitro and recruiting rBMSCs to the rat periodontal defect and facilitated bone regeneration in vivo. Conclusion: Our LIPUS assisted S/B@NPs system can effectively facilitate stem cell recruitment and periodontal bone regeneration. Considering its reliable safety and therapeutic effect on bone fracture, LIPUS, as an adjuvant therapy, holds great potential in the regulation of drug delivery systems for bone healing.

PEG 400:Trehalose Coating Enhances Curcumin-Loaded PLGA Nanoparticle Internalization in Neuronal Cells

This work proposes a combination of polyethylene glycol 400 (PEG) and trehalose as a surface modification approach to enhance PLGA-based nanoparticles as a drug carrier for neurons. PEG improves nanoparticles' hydrophilicity, and trehalose enhances the nanoparticle's cellular internalization by inducing a more auspicious microenvironment based on inhibiting cell surface receptor denaturation. To optimize the nanoprecipitation process, a central composite design was performed; nanoparticles were adsorbed with PEG and trehalose. PLGA nanoparticles with diameters smaller than 200 nm were produced, and the coating process did not considerably increase their size. Nanoparticles entrapped curcumin, and their release profile was determined. The nanoparticles presented a curcumin entrapment efficiency of over 40%, and coated nanoparticles reached 60% of curcumin release in two weeks. MTT tests and curcumin fluorescence, with confocal imaging, were used to assess nanoparticle cytotoxicity and cell internalization in SH-SY5Y cells. Free curcumin 80 µM depleted the cell survival to 13% at 72 h. Contrariwise, PEG:Trehalose-coated curcumin-loaded and non-loaded nanoparticles preserved cell survival at 76% and 79% under the same conditions, respectively. Cells incubated with 100 µM curcumin or curcumin nanoparticles for 1 h exhibited 13.4% and 14.84% of curcumin's fluorescence, respectively. Moreover, cells exposed to 100 µM curcumin in PEG:Trehalose-coated nanoparticles for 1 h presented 28% fluorescence. In conclusion, PEG:Trehalose-adsorbed nanoparticles smaller than 200 nm exhibited suitable neural cytotoxicity and increased cell internalization proficiency.

Nafcillin-Loaded Photocrosslinkable Nanocomposite Hydrogels for Biomedical Applications

Skin infections are frequently treated via intravenous or oral administration of antibiotics, which can lead to serious adverse effects and may sometimes contribute to the proliferation of resistant bacterial strains. Skin represents a convenient pathway for delivering therapeutic compounds, ensured by the high number of blood vessels and amount of lymphatic fluids in the cutaneous tissues, which are systematically connected to the rest of the body. This study provides a novel, straightforward method to obtain nafcillin-loaded photocrosslinkable nanocomposite hydrogels and demonstrates their performance as drug carriers and antimicrobial efficacy against Gram-positive bacteria. The novel formulations obtained, based on polyvinylpyrrolidone, tri(ethylene glycol) divinyl ether crosslinker, hydrophilic bentonite nanoclay, and/or two types of photoactive (TiO₂ and ZnO) nanofillers, were characterized using various analytical methods (transmission electron microscopy (TEM), scanning electron microscopy-energy-dispersive X-ray analysis (SEM-EDX), mechanical tests (tension, compression, and shear), ultraviolet-visible spectroscopy (UV-Vis), swelling investigations, and via specific microbiological assays ("agar disc diffusion method" and "time-kill test"). The results reveal that the nanocomposite hydrogel possessed high mechanical resistance, good swelling abilities, and good antimicrobial activity, demonstrating a decrease in the bacteria growth between 3log₁₀ and 2log₁₀ after one hour of direct contact with S. aureus.

Weibull β value for the discernment of drug release mechanism of PLGA particles

Mathematical models are used to characterize and optimize drug release in drug delivery systems (DDS). One of the most widely used DDS is the poly(lactic-co-glycolic acid) (PLGA)-based polymeric matrix owing to its biodegradability, biocompatibility, and easy manipulation of its properties through the manipulation of synthesis processes. Over the years, the Korsmeyer-Peppas model has been the most widely used model for characterizing the release profiles of PLGA DDS. However, owing to the limitations of the Korsmeyer-Peppas model, the Weibull model has emerged as an alternative for the characterization of the release profiles of PLGA polymeric matrices. The purpose of this study was to establish a correlation between the n and β parameters of the Korsmeyer-Peppas and Weibull models and to use the Weibull model to discern the drug release mechanism. A total of 451 datasets describing the overtime drug release of PLGA-based formulations from 173 scientific articles were fitted to both models. The Korsmeyer-Peppas model had a mean Akaike Information Criteria (AIC) value of 54.52 and an n value of 0.42, while the Weibull model had a mean AIC of 51.99 and a β value of 0.55, and by using reduced major axis regression values, a high correlation was found between the n and β values. These results demonstrate the ability of the Weibull model to characterize the release profiles of PLGA-based matrices and the usefulness of the β parameter for determining the drug release mechanism.

Controlled Drug Release from Nanoengineered Polysaccharides

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

Hydrogel for the Controlled Delivery of Bioactive Components from Extracts of Eupatorium glutinosum Lam. Leaves

This research reported a hydrogel loaded with the ethanolic and methanolic extracts of Eupatorium glutinosum Lam. The E. glutinosum extracts were characterized by phytochemical screening, Fourier-transform infrared spectroscopy (FTIR), thin-layer chromatography (TLC), and UV/Vis profile identification. This research also evaluated the pharmacological activity of the extracts using antimicrobial, antioxidant, and anti-inflammatory assays prior to polymeric encapsulation. Results indicate that extracts inhibit the Escherichia colii DH5-α (Gram negative) growth; excellent antioxidant activity was evaluated by the ferric reducing power and total antioxidant activity assays, and extracts showed an anti-hemolytic effect. Moreover, the cotton and microcrystalline cellulose hydrogels demonstrate successful encapsulation based on characterization and kinetics studies such as FTIR, extract release, and swelling degree. Moreover, effective antibacterial activity was registered by the loaded hydrogel. The overall results encourage and show that Eupatorium glutinosum-loaded hydrogel may find a wide range of bandage and wound healing applications in the biomedical area.

Biomaterials Based on Chitosan and Polyvinyl Alcohol as a Drug Delivery System with Wound-Healing Effects

The excellent biological properties of chitosan (CS) together with the increased oxygen permeability of polyvinyl alcohol (PVA) were the prerequisites for the creation of a wound healing dressing that would also function as a system for L-arginine (L-arg) and caffeine (Caff) delivery. Using the freezing/thawing method, 12 hydrogels were obtained in PVA:CS polymer ratios of 90:10, 75:25, and 60:40, and all were loaded with L-arg, Caff, and the mixture of L-arg and Caff, respectively. Afterwards, an inorganic material (zeolite-Z) was added to the best polymeric ratio (75:25) and loaded with active substances. The interactions between the constituents of the hydrogels were analyzed by FTIR spectroscopy, the uniformity of the network was highlighted by the SEM technique, and the dynamic water vapor sorption capacity was evaluated. In the presence of the inorganic material, the release profile of the active substances is delayed, and in vitro permeation kinetics proves that the equilibrium state is not reached even after four hours. The synergy of the constituents in the polymer network recommends that they be used in medical applications, such as wound healing dressings.

Polymeric hydrogel forming microneedle-mediated transdermal delivery of sildenafil citrate from direct-compressed tablet reservoir for potential improvement of pulmonary hypertension therapy

Pulmonary hypertension (PH) is a cardiovascular disease affecting patient's life. Sildenafil citrate (SC), the first-line treatment, is present in oral and injectable forms with some drawbacks, primarily poor patient's comfort and low oral bioavailability. To counter these limitations, stratum corneum-penetrating hydrogel-forming microneedles (HFM) was created, making it easier to distribute SC transdermally. HFM was fabricated using polyvinyl alcohol (PVA) and two variations of polyvinyl pyrrolidone's (PVP) concentration as polymers and citric acid (CA) as crosslinking agent. The crosslinking time was also variated. The assessment of swelling, insertion characteristics, and mechanical resistance revealed that it possessed swelling capacities up to 470 % and strong insertion capabilities. This HFM was integrated with a tablet reservoir prepared using several concentrations of sodium starch glycolate (SSG) as super disintegrant. The tablet reservoir's hardness, dissolution rate, XRD, and FTIR profiles were evaluated and the results showed that 4 % of SSG was the option for enhancing SC's solubility. According to ex vivo study, this system released 24.12 ± 0.92 % of SC. For the first time, SC was successfully incorporated into a system of HFM and tablet reservoir and was non-toxic, showing promise in terms of improving PAH therapy's efficacy following comprehensive in vivo studies in the future.

Enhanced Nasal Deposition and Anti-Coronavirus Effect of Favipiravir-Loaded Mucoadhesive Chitosan-Alginate Nanoparticles

Favipiravir (FVR) is a repurposed antiviral drug for treating mild to moderate cases of the novel coronavirus disease 2019 (COVID-19). However, its poor solubility and permeability limit its clinical efficacy. To overcome its physicochemical and pharmacokinetic limitations, we statistically designed a mucoadhesive chitosan-alginate nanoparticles (MCS-ALG-NPs) as a new carrier for FVR using response surface methodology, which provided suitable characteristics for transmucosal delivery. The use of mucoadhesive polymers for intranasal administration promotes the residence time and contact of FVR in the mucus membrane. The optimized FVR-MCS-ALG-NPs demonstrated superior mucoadhesion, higher permeation and deposition in the nasal mucosa, and a significant increase in the inhibition of viral replication over 35-fold compared with free FVR. The overall results suggest that MCS-ALG-NPs could be used as an effective mucoadhesive carrier to enhance the activity of FVR against COVID-19.

Ion-Triggered In Situ Gelling Intranasal Spray of Dronedarone Hydrochloride Nanocarriers: In Vitro Optimization and In Vivo Pharmacokinetic Appraisal

The current study aims to develop niosomal nanocarriers for intranasal delivery of dronedarone hydrochloride to ameliorate its limited bioavailability. Niosomes were prepared by ethanol injection method and optimized using 3² full factorial experimental design. Both Span® type (X1) and Span®: cholesterol ratio (X2) were set as independent variables. Vesicle size (Y1), polydispersity index (Y2), zeta potential (Y3), and entrapment efficiency (Y4) were set as responses. The optimal formula was further incorporated into an ion-sensitive in situ gelling polymer for intranasal delivery. Optimal formula (N7), which is composed of Span® 80: cholesterol (1:1), was of the least vesicle size (121.27 ± 13.31 nm), least polydispersity index (0.43 ± 0.073), highest zeta potential (-22.23 ± 2.84 mV) and highest entrapment efficiency (73.44 ± 2.8%). About 75.86% and 60.29% of dronedarone hydrochloride were released from N7 dispersion and in situ gel, respectively, within 12 h, compared to only 13.3% released from a drug-free suspension. In vivo pharmacokinetic study on male New Zealand rabbits resulted in significantly higher Cmax, AUC0-72, and AUC0-∞ of intranasal niosomal in situ gel compared to oral suspension. Almost twofold amplification of relative bioavailability was obtained after intranasal administration of niosomal in situ gel (195.7%) compared to oral suspension.