Carbon dot-graphene oxide-based luminescent nanosensor for creatinine detection in human urine

A fluorescence (FL)-based nanosensor has been devised for creatinine (CR) detection in human urine specimens. The proposed nanosensor utilized a nanocomposite (NC) of carbon dots (CDs) and graphene oxide (GO). The formation of CDs/GO NC reduced the CD FL emission (λexcitation = 390 nm, λemission = 461 nm) by ~ 75%. With the introduction of CR to the NC, the CD emission intensity was reinstated by approximately 70%. The linear detection range for CR was 10-5 to 0.1 mg dL-1 (R2 = 0.998), with a limit of detection of 4.3 × 10-2 mg dL-1. Additionally, CDs/GO NC exhibited outstanding consistency and specificity in recognizing CR within urine specimens from both healthy individuals and patients suffering from chronic kidney disease (CKD). The Bland-Altman assessment (utilizing 25 human urine specimens) displayed remarkable consensus (R2 = 0.995) among the FL approach and the benchmark Jaffe technique. This observation indicates the hands-on usefulness of the nanosensor for identifying CR in biological specimens.

Theoretical and Experimental Analysis of Hydroxyl and Epoxy Group Effects on Graphene Oxide Properties

In this study, we analyzed the impact of hydroxyl and epoxy groups on the properties of graphene oxide (GO) for the adsorption of methylene blue (MB) dye from water, addressing the urgent need for effective water purification methods due to industrial pollution. Employing a dual approach, we integrated experimental techniques with theoretical modeling via density functional theory (DFT) to examine the atomic structure of GO and its adsorption capabilities. The methodology encompasses a series of experiments to evaluate the performance of GO in MB dye adsorption under different conditions, including differences in pH, dye concentration, reaction temperature, and contact time, providing a comprehensive view of its effectiveness. Theoretical DFT calculations provide insights into how hydroxyl and epoxy modifications alter the electronic properties of GO, improving adsorption efficiency. The results demonstrate a significant improvement in the dye adsorption capacity of GO, attributed to the interaction between the functional groups and MB molecules. This study not only confirms the potential of GO as a superior adsorbent for water treatment, but also contributes to the optimization of GO-based materials for environmental remediation, highlighting the synergy between experimental observations and theoretical predictions in advances in materials science to improve sustainability.

Noncovalent Functionalization of Graphene Nanoplatelets and Their Applications in Supercapacitors

We demonstrate a simple noncovalent functionalization technique, which involves graphite exfoliation and subsequent coating of the resulting graphene nanoplatelets (GNPs) with trimellitic anhydride (TMA), using a thermomechanical exfoliation process. TMA adsorbs on the surface of the GNPs, resulting in a reduction of the specific surface area to 312 ± 9 m2/g compared to 410 ± 12 m2/g for the unmodified GNPs. Detailed imaging, thermogravimetric, and X-ray diffraction analysis showed that the modified GNPs (TMA-GNPs) maintain similar structure to the unmodified GNPs. The presence of functional groups, confirmed by X-ray photoelectron spectroscopy analysis, caused an increase in the surface energy from 45.6 mJ/m2 for the GNPs to 57.9 mJ/m2 for TMA-GNPs. The resulting coated TMA-GNPs form stable dispersions in water while maintaining their inherent conductive properties, thus enabling applications, such as the manufacture of conductive films and supercapacitors. As a proof-of-concept, electrodes for supercapacitors are prepared from concentrated aqueous dispersions of the functionalized GNPs. Electrochemical characterization of the supercapacitors using electrochemical impedance spectroscopy, cyclic voltammetry and galvanostatic charge/discharge tests showed a specific capacitance of 22.2 F/cm3 at a scan rate of 1 mV/s from cyclic voltammetry and 17.3 F/cm3 at a current density of 1 A/g from galvanostatic charge/discharge tests, with a 90% capacitance retention after 10,000 cycles.

Carbon Nanomaterial Fluorescent Probes and Their Biological Applications

Fluorescent carbon nanomaterials have broadly useful chemical and photophysical attributes that are conducive to applications in biology. In this review, we focus on materials whose photophysics allow for the use of these materials in biomedical and environmental applications, with emphasis on imaging, biosensing, and cargo delivery. The review focuses primarily on graphitic carbon nanomaterials including graphene and its derivatives, carbon nanotubes, as well as carbon dots and carbon nanohoops. Recent advances in and future prospects of these fields are discussed at depth, and where appropriate, references to reviews pertaining to older literature are provided.

Band Gap Engineering in Two-Dimensional Materials by Functionalization: Methylation of Graphene and Graphene Bilayers

Graphene is well-known for its unique combination of electrical and mechanical properties. However, its vanishing band gap limits the use of graphene in microelectronics. Covalent functionalization of graphene has been a common approach to address this critical issue and introduce a band gap. In this Article, we systematically analyze the functionalization of single-layer graphene (SLG) and bilayer graphene (BLG) with methyl (CH₃) using periodic density functional theory (DFT) at the PBE+D3 level of theory. We also include a comparison of methylated single-layer and bilayer graphene, as well as a discussion of different methylation options (radicalic, cationic, and anionic). For SLG, methyl coverages ranging from 1/8 to 1/1, (i.e., the fully methylated analogue of graphane) are considered. We find that up to a coverage θ of 1/2, graphene readily accepts CH₃, with neighbor CH₃ groups preferring trans positions. Above θ = 1/2, the tendency to accept further CH₃ weakens and the lattice constant increases. The band gap behaves less regularly, but overall it increases with increasing methyl coverage. Thus, methylated graphene shows potential for developing band gap-tuned microelectronics devices and may offer further functionalization options. To guide in the interpretation of methylation experiments, vibrational signatures of various species are characterized by normal-mode analysis (NMA), their vibrational density of states (VDOS), and infrared (IR) spectra, the latter two are obtained from ab initio molecular dynamics (AIMD) in combination with a velocity-velocity autocorrelation function (VVAF) approach.

Enhanced Thermoelectricity in Metal-[60]Fullerene-Graphene Molecular Junctions

The thermoelectric properties of molecular junctions consisting of a metal Pt electrode contacting [60]fullerene derivatives covalently bound to a graphene electrode have been studied by using a conducting-probe atomic force microscope (c-AFM). The [60]fullerene derivatives are covalently linked to the graphene via two meta-connected phenyl rings, two para-connected phenyl rings, or a single phenyl ring. We find that the magnitude of the Seebeck coefficient is up to nine times larger than that of Au-C₆₀-Pt molecular junctions. Moreover, the sign of the thermopower can be either positive or negative depending on the details of the binding geometry and on the local value of the Fermi energy. Our results demonstrate the potential of using graphene electrodes for controlling and enhancing the thermoelectric properties of molecular junctions and confirm the outstanding performance of [60]fullerene derivatives.

Mechanical, Thermal and Electrical Properties of Epoxy Nanocomposites with Amine-Functionalized Reduced Graphene Oxide via Plasma Treatment

A suitable functionalization of graphene and its derivatives can further enhance the material properties of nanocomposites. In contrast to chemical functionalization methods that have been extensively researched, functionalization by plasma treatment is relatively unexplored. In this work, we compare the mechanical, thermal and electrical characteristics of an epoxy matrix incorporating loadings from 0.00 to 1.50 wt% of non-functionalized (rGO) and amine-functionalized reduced graphene oxide (frGO) for which the functionalization is realized by plasma processing. No significant difference between the rGO- and frGO-including nanocomposites was observed with respect to the stiffness, strength, specific heat capacity, coefficient of thermal expansion and electrical conductivity. Yet, the composites with 1.50 wt% frGO (rGO) exhibited a thermal conductivity that was 27% (20%) higher than the neat polymer due to the enhanced interface, which enabled a better transfer of heat. In addition, a considerable increase in the specific heat capacity and thermal conductivity was established with rising temperatures. This information will facilitate the choice of materials depending on the loading and functionalization of graphene materials for composite applications with an epoxy matrix.