Theoretical and Experimental Analysis of Hydroxyl and Epoxy Group Effects on Graphene Oxide Properties

In this study, we analyzed the impact of hydroxyl and epoxy groups on the properties of graphene oxide (GO) for the adsorption of methylene blue (MB) dye from water, addressing the urgent need for effective water purification methods due to industrial pollution. Employing a dual approach, we integrated experimental techniques with theoretical modeling via density functional theory (DFT) to examine the atomic structure of GO and its adsorption capabilities. The methodology encompasses a series of experiments to evaluate the performance of GO in MB dye adsorption under different conditions, including differences in pH, dye concentration, reaction temperature, and contact time, providing a comprehensive view of its effectiveness. Theoretical DFT calculations provide insights into how hydroxyl and epoxy modifications alter the electronic properties of GO, improving adsorption efficiency. The results demonstrate a significant improvement in the dye adsorption capacity of GO, attributed to the interaction between the functional groups and MB molecules. This study not only confirms the potential of GO as a superior adsorbent for water treatment, but also contributes to the optimization of GO-based materials for environmental remediation, highlighting the synergy between experimental observations and theoretical predictions in advances in materials science to improve sustainability.

Recycling of used vegetable oils by powder adsorption

The treatment of used vegetable oil (UVO) with seven different adsorbents and through two different procedures (stirring and gravity filtration) was explored. Important differences in terms of density, turbidity, electrical resistance, free fatty acids (FFAs) content and relative fatty acid distribution were observed. Different outcomes were shown depending both on the adsorbent and on the procedure. Lower values of density and FFAs were registered for oils treated by gravity filtration with portland (respectively 0.6% and 0.81 g/ml) and celite (respectively 0.7% and 0.72 g/ml). Considering the undesired leaching from the powder to the oil, related to the turbidity, the celite resulted more suitable for the oil recycling (241 Nephelometric Turbidity Unit (NTU) for portland vs 184 NTU for celite). In addition, Fourier-transform infrared spectroscopy combined with multivariate analysis allowed to determine a chemical fingerprint relative characteristic of vegetable oils recycled by gravity or by adsorption by stirring.

Comparison of production of gamma-decalactone via microbial biotransformation based on different adsorption-embedding systems

Gamma-decalactone (GDL) is an essential flavor additive with peach-aroma, which can be prepared via microbial biotransformation from ricinoleic acid (RA). The difficulty of RA dispersion in medium limited its utilization, which made the yield of GDL low. In this study, four adsorbent materials (AM) were investigated to increase RA distribution, including halloysite, clay, SUNSIL-130NP silica (130NP), and SUNSIL-130H silica (130H). They were compared with respect to their effects on the biotransformation process, and the mechanism of AM on productivity of Saccharomyces cerevisiae was revealed. Scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis were utilized to reveal the mechanism of AM effect on GDL production. The results showed that AM functioned as an adsorption and slow-releasing carrier of RA and cell immobilization. RA was crosslinked onto the surface of four AM via hydrogen bonds and the contact area between RA and yeast increased without negative viability effect. The best adsorption-embedding rate of RA to AM was 70.94% with 130H and the GDL yield improved to 2.79 g L^-1 . The highest conversion rate was 88.99% with halloysite at 36 h. This study provides a potential strategy to improve GDL yield efficiently via biotransformation on an industrial scale.

Innovative Polymeric Hybrid Nanocomposites for Application in Photocatalysis

The immobilization of inorganic nanomaterials on polymeric substrates has been drawing a lot of attention in recent years owing to the extraordinary properties of the as-obtained materials. The hybrid materials, indeed, combine the benefits of the plastic matter such as flexibility, low-cost, mechanical stability and high durability, with them deriving from their inorganic counterparts. In particular, if the inorganic fillers are nanostructured photocatalysts, the originated hybrid systems will be able to utilize the energy delivered by light, catalysing chemical reactions in a sustainable pathway. Most importantly, since the nanofillers can be ad-hoc anchored to the macromolecular structure, their release in the environment will be prevented, thus overcoming one of the main restrictions that impedes their applications on a large scale. In this review, several typologies of hybrid photocatalytic nanomaterials, obtained by using both organic and inorganic semiconductors and realized with different synthetic protocols, were reported and discussed. In the first part of the manuscript, nanocomposites realized by simply blending the TiO2 or ZnO nanomaterials in thermoplastic polymeric matrices are illustrated. Subsequently, the atomic layer deposition (ALD) technique is presented as an excellent method to formulate polymeric nanocomposites. Successively, some examples of polyporphyrins hybrid systems containing graphene, acting as photocatalysts under visible light irradiation, are discussed. Lastly, photocatalytic polymeric nanosponges, with extraordinary adsorption properties, are shown. All the described materials were deeply characterized and their photocatalytic abilities were evaluated by the degradation of several organic water pollutants such as dyes, phenol, pesticides, drugs, and personal care products. The antibacterial performance was also evaluated for selected systems. The relevance of the obtained results is widely overviewed, opening the route for the application of such multifunctional photocatalytic hybrid materials in wastewater remediation.

Synthesis and Characterization of Na-Zeolites from Textile Waste Ash and Its Application for Removal of Lead (Pb) from Wastewater

Massive production of carcinogenic fly ash waste poses severe threats to water bodies due to its disposal into drains and landfills. Fly ash can be a source of raw materials for the synthesis of adsorbents. Rag fly ash as a new class of raw materials could be a cheap source of Al and Si for the synthesis of Na-zeolites. In this work, NaOH activation, via a prefusion- and postfusion-based hydrothermal strategy, was practiced for the modification of rag fly ash into Na-zeolite. Morphology, surface porosity, chemical composition, functionality, mineral phases, and crystallinity, in conjunction with ion exchangeability of the tailored materials, were evaluated by SEM, ICP-OES, XRF, FTIR, XRD, and cation exchange capacity (CEC) techniques. Rag fly ash and the synthesized Na-zeolites were applied for the removal of Pb (II) from synthetic wastewater by varying the reaction conditions, such as initial metal ion concentration, mass of adsorbent, sorption time, and pH of the reaction medium. It was observed that Na-zeolite materials (1 g/100 mL) effectively removed up to 90–98% of Pb (II) ions from 100 mg/L synthetic solution within 30 min at pH ≈ 8. Freundlich adsorption isotherm favors the multilayer heterogeneous adsorption mechanism for the removal of Pb (II). It is reasonable to conclude that recycling of textile rag fly ash waste into value-added Na-zeolites for the treatment of industrial wastewater could be an emergent move toward achieving sustainable and green remediation.

Impact of Pyrolysis Temperature on the Properties of Eucalyptus Wood-Derived Biochar

Pyrolysis conditions directly influence biochar properties and, consequently, influence the potential use of biochar. In this study, we evaluated the effects of different pyrolysis temperatures (450, 550, 650, 750, 850, and 950 °C) on the hydrogen potential, electrical conductivity, ash content, yield, volatile matter content, elemental analysis, Fourier-transform infrared spectroscopy results, X-ray diffraction results, scanning electron microscopy results, specific surface area, and micropore volume of eucalyptus wood-derived biochar. The degree of linear association between pyrolysis temperatures and biochar properties was examined using the Pearson correlation coefficient. The results showed a positive correlation of the pyrolysis temperature with the hydrogen potential value, electrical conductivity, and elemental carbon. There was a negative correlation of the pyrolysis temperature with the yield, volatile matter content, elemental oxygen, elemental hydrogen, surface area, aromaticity, hydrophilicity, and polarity indexes. The Fourier-transform infrared spectroscopy data indicated an increase in aromaticity and a decrease in the polarity of high-temperature biochar. The increased pyrolysis temperature caused the loss of cellulose and crystalline mineral components, as indicated by X-ray diffraction analysis and scanning electron microscopy images. These results indicated that changing the pyrolysis temperature enables the production of biochar from the same raw material with a wide range of physicochemical properties, which allows its use in various types of agricultural and environmental activities.

Cost Estimation of Polymeric Adsorbents

One of the most promising techniques of recent research is adsorption. This technique attracts great attention in environmental technology, especially in the decontamination of water and wastewaters. A “hidden” point of the above is the cost of adsorbents. As can be easily observed in the literature, there is not any mention about the synthesis cost of adsorbents. What are the basic criteria with which an industry can select an adsorbent? What is the synthesis (recipe) cost? What is the energy demand to synthesize an efficient material? All of these are questions which have not been answered, until now. The reason for this is that the estimation of adsorbents’ cost is relatively difficult, because too many cost factors are involved (labor cost, raw materials cost, energy cost, tax cost, etc.). In this work, the first estimation cost of adsorbents is presented, taking into consideration all of the major factors which influence the final value. To be more comparable, the adsorbents used are from a list of polymeric materials which are already synthesized and tested in our laboratory. All of them are polymeric materials with chitosan as a substrate, which is efficiently used for the removal of heavy metal ions.

Development of a Zeolite A/LDH Composite for Simultaneous Cation and Anion Removal

Wastewater from the oil industry is a major problem for aqueous environments due to its complexity and estimated volume of approximately 250 million barrels per day. The combination of these petroleum pollutants creates risks to human health, and their removal from the environment is considered a major problem in the world today. Thus, this work has the objective of studying the treatment of this type of effluent through the adsorption method using the following exchange materials: cationic, anionic, their combination by a sequential method, and a composite material. Zeolite A, a layered double hydroxide (LDH), and the new composite material formed by zeolite A and LDH structures were synthesized for this study. All were used for the simultaneous treatment of cations and anions in a complex sample such as water produced from petroleum production. The composite demonstrated an excellent ability to simultaneously remove cations and anions. The results obtained after the different treatment modes of the effluent using different materials varied from 85% to 100% for the removal of cations and from 56% to 99.7% for the removal of anions.

Adsorption Heat Storage: State-of-the-Art and Future Perspectives

Thermal energy storage (TES) is a key technology to enhance the efficiency of energy systems as well as to increase the share of renewable energies. In this context, the present paper reports a literature review of the recent advancement in the field of adsorption TES systems. After an initial introduction concerning different heat storage technologies, the working principle of the adsorption TES is explained and compared to other technologies. Subsequently, promising features and critical issues at a material, component and system level are deeply analyzed and the ongoing activities to make this technology ready for marketing are introduced.

Micro-Nanocomposites in Environmental Management

Water pollution, a worldwide issue for the human society, has raised global concerns on environmental sustainability, calling for high-performance materials for effective treatments. Since the traditional techniques have inherent limitations in treatment speed and efficiency, nanotechnology is subsequently used as an environmental technology to remove pollutants through a rapid adsorption and degradation process. Therefore, here, various adsorbent and photodegradation composite materials leading to effective water remediation are summarized and predicted. Notably, recent advances in simultaneous adsorption and photodegradation micro-nanocomposites are outlined. Such materials can not only completely adsorb and remove contaminants, but the micro-nanocomposites can also be directly reused without further treatment. Finally, the future development of this unique system is discussed.