Evaluation of diethylenetriaminepentaacetic acid modified chitosan immobilized in amino-carbmated alginate matrix as a low cost adsorbent for effective Cu(II) recovery

In present work, facile synthesis of a biocompatible hybrid biosorbent based on diethylenetriaminepentaacetic acid (DTPA) modified chitosan immobilized in organo-functionalized sodium alginate matrix (DTPA-MCSA) was carried out. DTPA-MCSA was casted in microspherical hydrogel beads. Three dimensional microporous geometry of the biosorbent remained well preserved as observed in SEM analysis which revealed the improved mechanical strength of the alginate matrix. Surface functionalization of base biopolymers was confirmed by FTIR and SEM analysis. Equilibrium sorption studies using DTPA-MCSA for Cu(II) from aqueous medium were carried out in batch mode and found considerably dependent on pH, contact sorption time, temperature and initial copper concentration. Isothermal sorption data showed close correlation with Langmuir model as evident from nonlinear fitting of data (R 2 ˜ 0.99) at different temperatures. The experimental sorption capacity (q e) was found nearly 67 mg/g using 100 mg/L initial concentration of copper ions. Kinetic studies were conducted using different initial concentrations for better elucidation of results and it showed better correlation with pseudo second order rate equation which unveiled that strong ion pair coordination and complexation exist between Cu(II) and newly grafted chelating sites of DTPA-MCSA. Thermodynamic parameters suggested that the adsorption process is spontaneous and endothermic. The results concluded that DTPA-MCSA could be a better candidate for adsorptive remediation of copper ions from liquid waste.

Facile synthesis and adsorption characteristics of a hybrid composite based on ethyl acetoacetate modified chitosan/calcium alginate/TiO2 for efficient recovery of Ni(II) from aqueous solution

In this study, chemical modification of chitosan has been carried out using epichlorohydrin as crosslinking agent and ethyl acetoacetate as a modifier to graft acetoacetyl moiety. The said organo-functionalization on chitosan and sodium alginate not only offered a novel support for TiO2 immobilization but also enhanced sorption performance for Ni(II) recovery from aqueous medium. So, a composite consisting of acetoacetyl moiety grafted chitosan, sodium alginate and titanium oxide (EAA-MCS/TiO2) was prepared and characterized by fourier transform-infra red (FT-IR) spectroscopy and scanning electron microscopy (SEM). The hybrid composite (3EAA-MCS/TiO2) which had TiO2 to EAA-MCS mass ratio of 20.0% by weight showed maximum sorption efficiency. The formulated sorbent was conditioned in the form of hydrogel beads for operation. Isothermal sorption and kinetics studies were performed at pH = 6.0 to configure the nature of sorption. Pseudo-2nd order rate expression better explained the sorption kinetics and chemisorption is the predominant mode of uptake. Langmuir adsorption model better explained the sorption process (R 2 ∼ 0.99) and maximum monolayer sorption capacity (q m ) at sorption/desorption dynamic equilibrium was computed as 403 mg/g at optimized pH.

Selective electromembrane extraction and sensitive colorimetric detection of copper(II)

In this study, an extremely effective electromembrane extraction (EME) method was developed for the selective extraction of Cu(II) followed by Red-Green-Blue (RGB) detection. The effective parameters optimized for the extraction efficiency of EME include applied voltage, extraction time, supported liquid membrane (SLM) composition, pH of acceptor/donor phases, and stirring rate. Under optimized conditions, Cu(II) was extracted from a 3 mL aqueous donor phase to 8 µL of 100 mM HCl acceptor solution through 1-octanol SLM using an applied voltage of 50 V for 15 min. The proposed method provides a working range of 0.1–0.75 µg·mL−1 with 0.03 µg·mL−1 limit for detection. Finally, the developed technique was applied to different environmental water samples for monitoring environmental pollution. Obtained relative recoveries were within the range of 93–106%. The relative standard deviation (RSD) and enhancement factor (EF) were found to be ≤4.8% and 100 respectively. We hope that this method can be introduced for quantitative determination of Cu(II) as a fast, simple, portable, inexpensive, effective, and precise procedure.

Structural, electric and dielectric properties of perovskite based nanoparticles for energy applications

A nanocomposite electrode, obtained by combining two high performance perovskite materials, such as lanthanum strontium cobalt ferrite, La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) and gadolinium doped ceria, Ce0.85Gd0.15O1.5 (GDC), were investigated as a promising cathode for moderate temperature solid oxide fuel cells (SOFCs). The synthesized material has good conductivity and catalytic performance. The purpose of this synthesis was to prepare a stable and highly performing nanocomposite cathode material. In this research work, LSCF and GDC were separately synthesized by co-precipitation and solid-state reaction method to gain a homogeneous perovskite phase. Varying concentrations of LSCF–GDC composite with GDC (10 wt.%, 20 wt.% and 30 wt.%) were synthesized followed by calcination at 600 °C to remove water content and to achieve an adequate porous structure for oxygen absorption and desorption. These fabricated LSCF, GDC, and the nanocomposite specimens were characterized for microstructure, particle size etc. via. X-ray diffraction method (XRD), scanning electron microscope (SEM) and the laser particle size analyzer. This procedural approach helps to expand new methods for generating bi-functional duel nano-sized perovskites with great performance and stability which can be utilized for advancement of renewable energy sectors especially for rechargeable fuel batteries.

Structural, electric and dielectric properties of perovskite based nanoparticles for energy applications

A nanocomposite electrode, obtained by combining two high performance perovskite materials, such as lanthanum strontium cobalt ferrite, La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) and gadolinium doped ceria, Ce0.85Gd0.15O1.5 (GDC), were investigated as a promising cathode for moderate temperature solid oxide fuel cells (SOFCs). The synthesized material has good conductivity and catalytic performance. The purpose of this synthesis was to prepare a stable and highly performing nanocomposite cathode material. In this research work, LSCF and GDC were separately synthesized by co-precipitation and solid-state reaction method to gain a homogeneous perovskite phase. Varying concentrations of LSCF–GDC composite with GDC (10 wt.%, 20 wt.% and 30 wt.%) were synthesized followed by calcination at 600 °C to remove water content and to achieve an adequate porous structure for oxygen absorption and desorption. These fabricated LSCF, GDC, and the nanocomposite specimens were characterized for microstructure, particle size etc. via. X-ray diffraction method (XRD), scanning electron microscope (SEM) and the laser particle size analyzer. This procedural approach helps to expand new methods for generating bi-functional duel nano-sized perovskites with great performance and stability which can be utilized for advancement of renewable energy sectors especially for rechargeable fuel batteries.

Coagulation of Metallic Pollutants from Wastewater Using a Variety of Coagulants Based on Metal Binding Interaction Studies

In this study, different organic (moringa and neem leaf powder) and inorganic (alum) coagulants were used for the wastewater treatment. Results revealed that all the coagulants at various doses significantly affected the pH, electrical conductivity (EC) and turbidity of wastewater. The maximum decrease in all the attributes was observed when 10 g of coagulants were used. Similarly, maximum adsorption potential was observed in case of moringa leaf powder. Maximum decrease in all physiochemical attributes such as pH (13%), EC (65%), turbidity (75%), total dissolved solids (TDS; 51%), total suspended solids (TSS; 48%), total hardness (TH; 29%), chloride contents (66%) and phosphate contents (44%) was observed. Regarding the heavy metals, maximum decrease for Cadmium (Cd; 96%), Lead (Pb; 88%), Arsenic (As; 23%), Iron (Fe; 90%), Manganese (Mn; 96%) and Zinc (Zn; 48%) was observed in same treatment. The decreasing order in terms of their adsorption potential for coagulants was moringa leaf powder > Alum > neem leaf powder. However, the maximum effect of coagulants was observed in case of textile wastewater as compared to the hospital wastewater. Based on the analyses, it is concluded that the moringa leaf powder has maximum adsorption potential for the remediation of wastewater.

Charcoal Prepared from Bougainvillea spectabilis Leaves as Low Cost Adsorbent: Kinetic and Equilibrium Studies for Removal of Iron from Aqueous Solution

Biosorption is one of the effective technique for removal of metals from aqueous solutions/industrial effluents. Present work is aimed to use low cost and ecofriendly material to remove the iron metal from aqueous solution which could possibly be used at industrial level. For this purpose, Bougainvillea spectabilis leaves were used for the production of charcoal. This charcoal was activated using HCl and HNO3. The AC shows promising efficiency for the adsorption of Fe II as a function of medium pH, contact time, adsorbent dose and temperature. Maximum adsorption was observed with 0.5–0.9 g adsorbent dose, 30 min contact time and at pH 3. Adsorption showed independence of temperature in the range of 30–70 °C. Among, Freundlich and Langmuir isotherms, the adsorbate followed Langmuir isothermal model. Among kinetics models, adsorbate followed pseudo second order kinetic model with R2 values of 0.9985 and 0.9996 for HCl treated and HNO3 treated AC, respectively. These data suggest that AC synthesized from Bougainvillea leaves proved to be an excellent adsorbent for the removal of iron metal from aqueous solution.