Thermo-Chemical Modification of Cellulose for the Adsorptive Removal of Titan Yellow from Wastewater

This research work focuses on the isolation and thermo-chemical modification of cellulose and its application as an adsorbent for the removal of organic pollutants. The used cellulose was collected from a locally available plant (Olive Europa) commonly called Zaitoon. The stem branches of Zaitoon were collected and then kept in water for 40-45 days at room temperature to extract the cellulose fibers. These cellulose fibers were then kept in the Soxhlet apparatus for washing in n-hexane for 72 h. The purified cellulose was divided into three parts: one part was subjected to thermal activation (TAC), the second was modified chemically (CMC) with Benzyl Chloride, while the last one remained un-functionalized (UFC). All the three forms of cellulose were characterized via FTIR and SEM, then utilized for the removal of Titan Yellow (TY) dye from aqueous media via adsorption process by varying the contact time, temperature, concentration of dye and type, and dose of adsorbent. The adsorption efficiencies of all adsorbents were compared under different experimental variables. Thermally activated cellulose showed the best results for the removal of TY compared with other materials. The calculated removal percentage of TY was found to be 97.69, 94.83, 94.83, and 98% under equilibrium conditions of contact time, temperature, adsorbent dose, and TY concentration. Similarly, the uptake capacities of TAC under optimal experimental conditions were found to be 19.56, 18.96, 18.52, and 18.75 mg/g. Thermodynamic studies of TAC, CMC, and UFC showed that the values of ΔG are negative, while those of ΔH and ΔS are positive in all cases and at all temperatures. This indicates that the TY elimination process is endothermic and spontaneous with an entropy-driven nature. The obtained results indicate that the as-fabricated low-cost biomaterials can effectively remove dyes from wastewater through physicochemical interactions. The removal process was influenced by the nature of the adsorbent and the operating variables.

Synthesis and characterization Agar/GO/ZnO NPs nanocomposite for removal of methylene blue and methyl orange as azo dyes from food industrial effluents

Herein, with using graphene oxide (GO), agar and ZnO NPs was synthesized as nanocomposite to removal of dyes contaminants from food industry effluents. Synthesis and characterization of the nanocomposite adsorbent were carried out by FTIR, XRD, FE-SEM, TEM, EDX and DLS analyses. The effects of various parameters such as pH, initial dye concentration, contact time and temperature on the removal of methylene blue (MB) and methyl orange (MO) as azo dyes were investigated. The used nanocomposite can be effective in the adsorption of dyes due to their different functional groups. The Freundlich and Langmuir models were used to investigate the isotherm of contaminants removal. The results showed that the removal of methylene blue and methyl orange dyes followed the Freundlich isotherm, and the values of the R² correlation coefficient for agar/GO, and agar/GO/ZnO nanocomposites for MB dye was 0.9640 and 0.9977, respectively, and for dye MO, 0.9918 and 0.9683, respectively. The maximum removal percentages for MB and MO dyes were 88% and 91%, respectively.

Photo-Assisted Removal of Rhodamine B and Nile Blue Dyes from Water Using CuO-SiO2 Composite

Wastewater from the textile industries contaminates the natural water and affects the aquatic environment, soil fertility and biological ecosystem through discharge of different hazardous effluents. Therefore, it is essential to remove such dissolved toxic materials from water by applying more efficient techniques. We performed a comparative study on the removal of rhodamine B (RhB) and Nile blue (NB) from water through a catalytic/photocatalytic approach while using a CuO-SiO2 based nanocomposite. The CuO-SiO2 nanocomposite was synthesized through a sol-gel process using copper nitrate dihydrate and tetraethylorthosilicate as CuO and SiO2 precursors, respectively, with ammonia solution as the precipitating agent. The synthesized nanocomposites were characterized, for their structure, morphology, crystallinity, stability, surface area, pore size and pore volume, by using a scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) techniques. The CuO-SiO2 nanocomposite was used for potential environmental applications in the terms of its catalytic and photocatalytic activities toward the degradation of rhodamine B (RhB) and Nile blue (NB) dyes, in the presence and absence of light, while monitoring the degradation process of dyes by UV-Visible spectroscopy. The catalytic efficiency of the same composite was studied and discussed in terms of changes in the chemical structures of dyes and other experimental conditions, such as the presence and absence of light. Moreover, the composite showed 85% and 90% efficiency towards the removal of rhodamine B and Nile blue dyes respectively. Thus, the CuO-SiO2 nanocomposite showed better efficiency toward removal of Nile blue as compared to rhodamine B dye while keeping other experimental variables constant. This can be attributed to the structure-property relationships and compatibility of a catalyst with the molecular structures of dyes.

Synthesis and characterization of heterostructured nanoparticle for efficient photocatalytic performance for dye degradation

This paper focusses on the synthesis of cobalt vanadate (CoVO4) nanoparticles (NPs) by precipitation method. This was further augmented by assistance from microwave. Nanotechnology has been a wonderful tool with the promising application in different fields of life. The CoVO4 NPs synthesized by microwave assisted precipitation method was characterized by advanced techniques such as X-ray powder diffraction (XRD), Energy dispersive X-ray analysis (EDX), Scanning electron microscopy (SEM), Ultraviolet visible spectroscopy (UV–vis) techniques. Rhodamine B (RhB) dye was used to evaluate the photo catalytic activity (PCA) of NPs by degradation of dye. The conditions were optimized for maximum degradation of dye. The NPs were in the nano flowers form and the size was ≤100 nm. The results regarding degradation of RhB was through PCA were promising; 83% dye was degraded at pH 10, reaction time 160 min and catalyst dose 1 g. It may conclude that the synthesized NPs could further be employed for possible treatment of industrial effluents particularly textile industry.

The Kinetics and Equilibrium Thermodynamics Study on the Removal of Direct Blue and Titan Yellow Dyes from Aqueous Media by Modified Rice Husk Char

The use of indigenous natural materials and their modification toward fruitful application is one of the important subjects. Thermal modification of Rice Husk at 400 oC resulted into Rice Husk Char (RHC) which was chemically modified with KOH and was labeled as KOH Modified Rice Husk Char (KMRHC). Both RHC and KMRHC were characterized by using, Fourier transformed infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-rays (EDX) and X-ray diffraction (XRD) before and after their use as adsorbents. The prepared material was applied for the removal of toxic dyes, Direct Blue (DB) and Titan Yellow (TY) from aqueous media. The maximum adsorption capacity of DB and TY dyes on KMRHC were inspected as 30.9 mg/g and 28.6 mg/g, respectively at pH 4 using initial dye concentrations of 80 mg/L containing 2500 mg/L of the adsorbent dose with agitation speed of 240 rpm at 303 K. At the same experimental conditions the highest percentage removal of DB and TY on the adsorbent were observed as 96.6% and 89.3%, respectively. Thermodynamics studies of the adsorption of DB and TY dyes on KMRHC inferred for exothermic and spontaneous process. The value of ΔS is negative which suggested that randomness decreases at the interface of adsorbent-adsorbate during the adsorption. The kinetics study indicated that the experimental data of the adsorption process for both dyes, best fits to pseudo-second order kinetic model. The equilibrium data was tested on Langmuir, Freundlich and Temkin adsorption isotherm models. It was observed that the data are best fit to the Langmuir isotherm model (R2 > 0.99), which suggested that the adsorption process is dominated by chemisorption approach. The overall results suggest that various parameters of the adsorption process were not only affected by the variation in experimental conditions but also by the chemical structure of the adsorbate molecules for the same adsorbent.

Kinetic Study of Degradation of Basic Turquise Blue X-GB and Basic Blue X-GRRL using Advanced Oxidation Process

This study focuses on application of advanced oxidation (Photo-Fenton) processes to decolorize Basic Turquise Blue (BTB) X-GB 250% and Basic Blue (BB) X-GRRL 250% dyes. The percent decolorization was studied in terms of effect of variation in intensity of UV light at optimum conditions of all the parameters (pH = 3.0, H2O2 = 4.8 mM, FeSO4 = 1.6 mM, temperature = 50 °C, time = 80 min for BTB X-GB, and pH = 5.0, H2O2 = 5.6 mM, FeSO4 = 2.0 mM, temperature = 40 °C, time = 60 min for BB X-GRRL). Maximum decolorization was obtained at maximum intensity (15660 counts/min) of UV light as 96.17% for BTB X-GB and 88.48% for BB X-GRRL. First order, 2nd order and BMG kinetic models were used to analyze the data obtained for intensity of UV light. BMG model gives us the higher values of correlation coefficients for all data of both the dyes. The results have shown that Photo-Fenton oxidation process is the beneficial and effective for oxidation treatment of waste water effluents containing dyes as main pollutants.

Adsorption of Dye from Wastewater onto ZnO Nanoparticles-Loaded Zeolite: Kinetic, Thermodynamic and Isotherm Studies

The adsorption process of methylene blue (MB) and its removal from aqueous solution at initial pollutant concentration range of 1–7 ppm was investigated. Zeolite-A (Z) and its ZnO-loaded species (Z/ZnO) were prepared via microwave technique from natural resource and applied for dye removal. The loading of ZnO was governed by the cation exchange property of zeolite, followed by calcination. Experimentally, Z and Z/ZnO were tested using X-ray Diffraction (XRD), Fourier-Transform Infrared (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectroscopy (EDX) and N2 adsorption-desorption. The examined parameters such as concentration of dye, contact time, ZnO dose and solution pH were traversed. Three isothermal models were analyzed. Kinetic studies indicated that, the adsorption of MB matched with pseudo-second order model. The maximum removal efficiency at pH 3, increased from 67.8% for Z to 94.8% for Z/ZnO modified with 3% ZnO loads (Z/ZnO(3%)). Parameters such as ΔH, ΔS, ΔG, S* and Ea were thermodynamically calculated. Langmiur isotherm and pseudo-second order models were the best fitting for the obtained data. The results indicated that, the adsorption of MB dye is spontaneous and endothermic, the removal efficiency is favored by increasing the temperature. ZnO-zeolite has much higher adsorption capacity for eliminating MB dye than that of the un-loaded zeolite.

A Novel Approach for Modification of Biosorbent by Silane Functionalization and its Industrial Application for Single and Multi-Component Solute System

The potential of an economically cheap raw material (rice husk) was evaluated in the present study to remove dyes including reactive yellow 15 (RY15) and reactive red 241 (RR241) in single and multi-component systems. The adsorbent was modified and functionalized chemically using glycidoxypropyltrimethoxysilane, sulfur and silane to enhance the removal efficiency of pollutants. The modified rice husk was evaluated by scanning electron microscope (SEM) and Fourier transform Infrared Spectroscopy (FTIR). Batch adsorption study showed that the modified rice husk with silane graft (RHSi) had highest removal efficiency of both dyes with 20% more removal compared to raw rice husk. The sorption correlated well with Langmuir, Freundlich, SIPS and Redlich-Peterson models for adsorption. Highest sorption was obtained at 10 mg L−1 of dye, 50 °C, 200 mg g−1 of adsorbent dose and pH 4. The mixture of two dyes poorly fit to the original Langmuir but fit best to the Langmuir-like model. This indicates that competitive Langmuir-like model considers that the capacities of adsorbents are equal. Results showed that the components compete for the available binding sites on adsorbent surface. It was also indicated that silane grafting can offer comparatively more binding sites compared to the raw rice husk and single-solute isotherm parameters cannot used for multi-component solute system.

Structural, Dielectric and Magnetic Studies of Perovskite [Gd1−xMxCrO3 (M = La, Co, Bi)] Nanoparticles: Photocatalytic Degradation of Dyes

Nanoparticles (NPs) of Gd1−xMxCrO3 (M = La, Co, Bi) were synthesized by microemulsion techniques, involving simultaneous single ion substitution philosophy. Structural, magnetic, dielectric properties, morphology, elemental analysis and distribution size of fabricated nano-crystalline were determined. The techniques employed for investigation are X-ray diffraction (XRD), vibrating sample magnetometer (VSM), dielectric measurement and scanning electron microscopy (SEM), energy dispersive X-ray (EDX), photoluminescence (PL) and atomic force microscopy (AFM), respectively. XRD pattern confirm that all the as-synthesized NPs have orthorhombic structure and successfully substituted of different metal ions into the regular crystal structure of GdCrO3. The lattice parameters X-ray density, bulk density, porosity and grain size were calculated from XRD pattern of Gd1−xMxCrO3 (M = La, Co, Bi) substituted and un-substituted GdCrO3. The magnetic hysteresis loop of fabricated product confirmed that the entire sample exhibits ferromagnetic behavior at room temperature. It was also found that the fabricated NPs show excellent photocatalytic activity (PCA) against Congo-red, about 78.24% after 55 min of incubation.

Green Synthesis of Ag–NiO and Investigation of its Catalytic Activity for Degradation of Rhodamine B Dye in Aqueous Medium

The plants assisted green synthesis of nanoparticles have drawn a momentous importance worldwide. NiO is one the metal oxides researched comprehensively for decades and still has dominance in the field of photo-catalysis. In present study NiO and Ag–NiO were successfully prepared by a simple and environmentally friendly method using nickel nitrate, silver nitrate and leaves extract of Azadirachta indica L. plant as precursor materials. The prepared materials were characterized by XRD, SEM and TGA. Then the photo-catalytic efficiency of NiO and Ag–NiO were evaluated by aqueous phase photo-degradation of rhodamine B as a model pollutant under ultraviolet irradiations. About 40% and 96% of 200 mg/L (50 mL) degraded in 120 min at 40 °C over NiO and Ag–NiO as photo-catalyst respectively. The apparent rate constants were determined as 0.0109, 0.0165, 0.0175 and 0.0190 per min at 30, 40, 50 and 60 °C respectively. 14.6 kJ/mol was calculated as activation energy of reaction.