Surface modification of cellulose nanocrystals for biomedical and personal hygiene applications

The increasing demand for sustainable and effective materials in biomedical and personal hygiene applications has driven the exploration of cellulose nanocrystals (CNCs) derived from biomass. These nanomaterials are highly valued for their exceptional mechanical properties, biocompatibility, and renewable nature. Researchers are exploring CNCs for advancing medical and hygiene products, but surface modification is often needed to maximize their benefits. Techniques such as chemical functionalization, physical coating, and hybridization can significantly enhance CNCs dispersibility, stability, and interaction with biological systems. This versatility makes CNCs suitable for a variety of applications, including drug delivery systems, wound dressings, and personal hygiene products. Despite their advantages, maintaining the inherent properties of CNCs while integrating new functionalities through modification poses a challenge. Understanding the impact of various modification techniques on CNC performance is crucial for optimizing their effectiveness. This review aimed to consolidate current knowledge on the surface modification of biomass-derived CNCs, offering insights into different methods and their implications for biomedical and personal hygiene applications. By highlighting advancements, challenges, and prospects, it served as a crucial resource for advancing the development and application of CNCs in these critical fields.

Challenges associated with cellulose composite material: Facet engineering and prospective

Cellulose is the most abundant polysaccharide on earth. It has a large number of desirable properties. Its low toxicity makes it more useful for a variety of applications. Nowadays, its composites are used in most engineering fields. Composite consists of a polymer matrix and use as a reinforcing material. By reducing the cost of traditional fibers, it has an increasing demand for environment-friendly purposes. The use of these types of composites is inherent in moisture absorption with hindered natural fibers. This determines the reduction of polymer composite material. By appropriate chemical surface treatment of cellulose composite materials, the effect could be diminished. The most modern and advanced techniques and methods for the preparation of cellulose and polymer composites are discussed here. Cellulosic composites show a reinforcing effect on the polymer matrix as pointed out by mechanical characterization. Researchers tried their hard work to study different ways of converting various agricultural by-products into useful eco-friendly polymer composites for sustainable production. Cellulose plays building blocks, that are critical for polymer products and their engineering applications. The most common method used to prepare composites is in-situ polymerization. This help to increase the yields of cellulosic composites with a significant enhancement in thermal stability and mechanical properties. Recently, cellulose composites used as enhancing the incorporation of inorganic materials in multi-functional properties. Furthermore, we have summarized in this review the potential applications of cellulose composites in different fields like packaging, aerogels, hydrogels, and fibers.

Role of silica-based porous cellulose nanocrystals in improving water absorption and mechanical properties

Epoxy resins are important thermosetting polymers. They are widely used in many applications i.e., adhesives, plastics, coatings and sealers. Epoxy molding compounds have attained dominance among common materials due to their excellent mechanical properties. The sol-gel simple method was applied to distinguish the impact on the colloidal time. The properties were obtained with silica-based fillers to enable their mechanical and thermal improvement. The work which we have done here on epoxy-based nanocomposites was successfully modified. The purpose of this research was to look into the effects of cellulose nanocrystals (CNCs) on various properties and applications. CNCs have recently attracted a lot of interest in a variety of industries due to their high aspect ratio, and low density which makes them perfect candidates. Adding different amounts of silica-based nanocomposites to the epoxy system. Analyzed with different techniques such as Fourier-transformed infrared spectroscope (FTIR), thermogravimetric analysis (TGA) and scanning electronic microscopic (SEM) to investigate the morphological properties of modified composites. The various %-age of silica composite was prepared in the epoxy system. The 20% of silica was shown greater enhancement and improvement. They show a better result than D-400 epoxy. Increasing the silica, the transparency of the films decreased, because clustering appears. This shows that the broad use of CNCs in environmental engineering applications is possible, particularly for surface modification, which was evaluated for qualities such as absorption and chemical resistant behavior.

Highly Stretchable, Soft, and Clear Viscoelastic Film with Good Recoverability for Flexible Display

The advancement of flexible electronic devices has prompted new material development for the display application. For flexible display, a suitable clear viscoelastic film (CVF) is essential to bond different layers in a display stack in order to improve the visualization and durability during the repeated folding process. However, it is challenging to integrate different properties in the CVF by overcoming many contradictory requirements, such as low modulus/glass transition temperature (T_g) and high adhesion or high recoverability and good stress-relaxation. In this work, a CVF was prepared using an interpenetrating polymer network (IPN) with bimodal chain length distribution, and it exhibited several favorable properties. The bimodal elastomer was composed of short-chain polyurethane (PU) and long-chain polyacrylate. The long-chain polyacrylate network provided a large amount of entanglement that conferred stretchability, adhesion, and stress-relaxation, whereas the short PU chain network acted as an entropy spring and contributed mostly to the recoverability. The experimental data suggested the presence of a hydrogen-bonding interaction and interlocked polymer chains between the two networks. When the components of the IPN are adjusted, the CVF can simultaneously achieve good stress-relaxation, high strain recovery at large strain (1000%), high toughness, clarity, and adhesion. Moreover, the CVF displayed low glass transition temperature (-57 °C) and low storage modulus (20 to 30 kPa at room temperature). To the best of our knowledge, this is the first report using the IPN concept to prepare a CVF with well-balanced properties.

A Review on the Modification of Cellulose and Its Applications

The latest advancements in cellulose and its derivatives are the subject of this study. We summarize the characteristics, modifications, applications, and properties of cellulose. Here, we discuss new breakthroughs in modified cellulose that allow for enhanced control. In addition to standard approaches, improvements in different techniques employed for cellulose and its derivatives are the subject of this review. The various strategies for synthetic polymers are also discussed. The recent advancements in polymer production allow for more precise control, and make it possible to make functional celluloses with better physical qualities. For sustainability and environmental preservation, the development of cellulose green processing is the most abundant renewable substance in nature. The discovery of cellulose disintegration opens up new possibilities for sustainable techniques. Based on the review of recent scientific literature, we believe that additional chemical units of cellulose solubility should be used. This evaluation will evaluate the sustainability of biomass and processing the greenness for the long term. It appears not only crucial to dissolution, but also to the greenness of any process.

Manufactures of bio‐degradable and bio‐based polymers for bio‐materials in the pharmaceutical field

In recent years, bio‐based polymers have emerged as an alternative to petroleum‐based polymers in various industries. The bio‐based materials are made from raw materials originating from natural sources, such as starch, cellulose, chitin, or bio‐degradable synthetic polymers (i.e., polycaprolactone and polylactic acid). In spite of several desirable properties of biodegradable polymers, for example, fully renewable, non‐toxic. Some properties like melt and impact strength, thermal stability, permeability, and so forth, still do not meet the demands for end‐use applications. One way to improve the properties of biopolymers and greatly enhance their commercial potential is to incorporate nanosized reinforcement in the polymer. The access of nano‐carriers to smart polymeric and bio‐materials are limited by polymerization methods. Bio‐polymers are considered an alternative to petroleum‐based fibers. These are directly produced by organisms. Smart nanoparticles are used in different medicines and their applications are size‐dependent. Among the different techniques used for sensitivity, selectivity, and interactions among the nanoparticles. More so, different approaches were found for polymerization. Methodologies such as the preparation of nano‐gels, bio‐degradable, and bio‐polymers manufacturing in the pharmaceutical field are discussed in detail. Their applications, properties in gene delivery, smart imaging, and multivalency approach are also highlighted.

Inorganic salt hydrates and zeolites composites studies for thermochemical heat storage

Salt hydrates (MgSO4 and ZnSO4) impregnated in zeolites, offer a variety of improvements, mostly providing a large surface area for salt hydrates and water molecules. A composite of 5 and 10% of salt contents were prepared as heat storage materials. The study’s finding showed that dehydration enthalpy of MgSO4 (1817 J g−1) and ZnSO4 (1586 J g−1) were 10 and 15% improved than pure salt hydrates by making composites. During the hydration process of composites, the water sorption is 30–37% improved and further the increasing of salt contents in composites enhances more 10% increase in the water resorption. The cyclicability of MgSO4/zeolite and ZnSO4/zeolite were 45 and 51% improved than their corresponding pure salt hydrates. The effect of humidity on the water sorption result reveals that composites of MgSO4/zeolite and ZnSO4/zeolite at 75% relative humidity (RH), the mass of water are 51 and 40% increase than 55% RH.