Trigeneration based on the pyrolysis of rural waste in India: Environmental impact, economic feasibility and business model innovation

Pyrolysis-based waste-to-bioenergy development has the potential to resolve some of the major challenges facing rural communities in India such as poor electrification, household air pollution, and farmland degradation and contamination. Existing understanding and analysis of the economic feasibility and environmental impact of bioenergy deployment in rural areas is limited by parameter uncertainties, and relevant business model innovation following economic evaluation is even scarcer. This paper uses findings from a new field survey of 1200 rural households to estimate the economic feasibility and environmental impact of a pyrolysis-based bioenergy trigeneration development that was designed to tackle these challenges. Based on the survey results, probability distributions were constructed and used to supply input parameters for cost-benefit analysis and life cycle assessment. Monte Carlo simulation was applied to characterise the uncertainties of economic feasibility and environmental impact accounting. It was shown that the global warming potential of the development was 350 kg of CO2-eq per capita per annum. Also, the survey identified a significant mismatch between feedstock prices considered in the literature and prices asked for by the surveyed villagers. The results of the cost-benefit analysis and life cycle assessment were then applied to propose two novel business models inspired by the Business Model Canvas, which had the potential to achieve up to 90 % economic profitability and result in a benefit-cost ratio of 1.35-1.75. This is the first study achieving combined environmental and economic analysis and business model innovation for rural bioenergy production in developing countries.

Reductive soil disinfestation and Fe amendment improve soil microbial composition and Fritillaria production

The continuous obstacles of cropping cause severe economic loss, which seriously threaten agricultural sustainable development. In addition, managing excess waste, such as potato peel and mineral waste residues, is a vital burden for industry and agriculture. Therefore, we explored the feasibility of reductive soil disinfestation (RSD) with potato peel and amendment with iron mineral waste residues for the production of Fritillaria thunbergii, which is vulnerable to continuous obstacles. In this study, the influences of iron mineral, RSD with different organic maters, as well as the combined effects of iron mineral and RSD on Fritillaria rhizosphere soil physicochemical properties, microbial communities, and Fritillaria production were investigated. The results revealed that the RSD treatments with potato peel significantly reduced the soil salinity and increased the soil pH, microbial activity, organic matter, and the contents of K and Ca. RSD with potato peel also significantly thrived of the beneficial microbes (Bacillus, Azotobacter, Microvirga, and Chaetomium), and down-regulated potential plant pathogens. RSD with potato peel significantly promoted F. thunbergii yield and quality. Moreover, the combined effects of RSD and iron mineral amendment further enhanced soil health, improved microbial community composition, and increased the yield and peimisine content of F. thunbergii by 24.2% and 49.3%, respectively. Overall, our results demonstrated that RSD with potato peel and amendment with iron mineral waste residues can efficiently improve soil fertility, modify the microbial community, and benefit for both the sustainable production of F. thunbergii and the management of waste. KEY POINTS: • RSD increases soil pH, organic matter, microbial activity, and mineral content • RSD with potato peel enriches beneficial microbes and decreases plant pathogens • PP + Fe treatment increases Fritillaria yield by 24.2% and peimisine content by 49.3.

Artificial intelligence and machine learning for smart bioprocesses

In recent years, the digital transformation of bioprocesses, which focuses on interconnectivity, online monitoring, process automation, artificial intelligence (AI) and machine learning (ML), and real-time data acquisition, has gained considerable attention. AI can systematically analyze and forecast high-dimensional data obtained from the operating dynamics of bioprocess, allowing for precise control and synchronization of the process to improve performance and efficiency. Data-driven bioprocessing is a promising technology for tackling emerging challenges in bioprocesses, such as resource availability, parameter dimensionality, nonlinearity, risk mitigation, and complex metabolisms. This special issue entitled "Machine Learning for Smart Bioprocesses (MLSB-2022)" was conceptualized to incorporate some of the recent advances in applications of emerging tools such as ML and AI in bioprocesses. This VSI: MLSB-2022 contains 23 manuscripts, and summarizes the major findings that can serve as a valuable resource for researchers to learn major advances in applications of ML and AI in bioprocesses.

Metagenomic insights into the inhibitory mechanisms of Cu on fermentative hydrogen production

Cu is widely present in the feedstocks of dark fermentation, which can inhibit H₂ production efficiency of the process. However, current understanding on the inhibitory mechanisms of Cu, especially the microbiological mechanism, is still lacking. This study investigated the inhibitory mechanisms of Cu²⁺ on fermentative hydrogen production by metagenomics sequencing. Results showed that the exposure to Cu²⁺ reduced the abundances of high-yielding hydrogen-producing genera (e.g. Clostridium sensu stricto), and remarkably down-regulated the genes involved in substrate membrane transport (e.g., gtsA, gtsB and gtsC), glycolysis (e.g. PK, ppgK and pgi-pmi), and hydrogen formation (e.g. pflA, fdoG, por and E1.12.7.2), leading to significant inhibition on the process performances. The H₂ yield was reduced from 1.49 mol H₂/mol-glucose to 0.59 and 0.05 mol H₂/mol-glucose upon exposure to 500 and 1000 mg/L of Cu²⁺, respectively. High concentrations of Cu²⁺ also reduced the rate of H₂ production and prolonged the H₂-producing lag phase.

Role of silica-based porous cellulose nanocrystals in improving water absorption and mechanical properties

Epoxy resins are important thermosetting polymers. They are widely used in many applications i.e., adhesives, plastics, coatings and sealers. Epoxy molding compounds have attained dominance among common materials due to their excellent mechanical properties. The sol-gel simple method was applied to distinguish the impact on the colloidal time. The properties were obtained with silica-based fillers to enable their mechanical and thermal improvement. The work which we have done here on epoxy-based nanocomposites was successfully modified. The purpose of this research was to look into the effects of cellulose nanocrystals (CNCs) on various properties and applications. CNCs have recently attracted a lot of interest in a variety of industries due to their high aspect ratio, and low density which makes them perfect candidates. Adding different amounts of silica-based nanocomposites to the epoxy system. Analyzed with different techniques such as Fourier-transformed infrared spectroscope (FTIR), thermogravimetric analysis (TGA) and scanning electronic microscopic (SEM) to investigate the morphological properties of modified composites. The various %-age of silica composite was prepared in the epoxy system. The 20% of silica was shown greater enhancement and improvement. They show a better result than D-400 epoxy. Increasing the silica, the transparency of the films decreased, because clustering appears. This shows that the broad use of CNCs in environmental engineering applications is possible, particularly for surface modification, which was evaluated for qualities such as absorption and chemical resistant behavior.

Review of biochar production via crop residue pyrolysis: Development and perspectives

Worldwide surge in crop residue generation has necessitated developing strategies for their sustainable disposal. Pyrolysis has been widely adopted to convert crop residue into biochar with bio-oil and gas being two co-products. The review adopts a whole system philosophy and systematically summarises up-to-date knowledge of crop residue pyrolysis processes, influential factors, and biochar applications. Essential process design tools for biochar production e.g., cost-benefit analysis, life cycle assessment, and machine learning methods are also reviewed, which has often been overlooked in prior reviews. Important aspects include (a) correlating techno-economics of biochar production with crop residue compositions, (b) process operating conditions and management strategies, (c) biochar applications including soil amendment, fuel displacement, catalytic usage, etc., (d) data-driven modelling techniques, (e) properties of biochar, and (f) climate change mitigation. Overall, the review will support the development of application-oriented process pipelines for crop residue-based biochar.

Review of explainable machine learning for anaerobic digestion

Anaerobic digestion (AD) is a promising technology for recovering value-added resources from organic waste, thus achieving sustainable waste management. The performance of AD is dictated by a variety of factors including system design and operating conditions. This necessitates developing suitable modelling and optimization tools to quantify its off-design performance, where the application of machine learning (ML) and soft computing approaches have received increasing attention. Here, we succinctly reviewed the latest progress in black-box ML approaches for AD modelling with a thrust on global and local model interpretability metrics (e.g., Shapley values, partial dependence analysis, permutation feature importance). Categorical applications of the ML and soft computing approaches such as what-if scenario analysis, fault detection in AD systems, long-term operation prediction, and integration of ML with life cycle assessment are discussed. Finally, the research gaps and scopes for future work are summarized.

Integration of anaerobic digestion with heat Pump: Machine learning-based technical and environmental assessment

Anaerobic digestion (AD)-based biogas production mitigates the environmental footprint of organic wastes (e.g., food waste and sewage sludge) and facilitates a circular economy. The work proposed an integrated system where the thermal energy demand of an AD is supplied using an air source heat pump (ASHP). The proposed system is compared to a baseline system, where the thermal energy is supplied by a natural gas-based heating system. Several machine learning models are developed for predicting biogas production, among which the Gaussian Process Regression (GPR) showed a superior performance (R² = 0.84 and RMSE = 0.0755 L gVS^-1 day^-1). The GPR model further informed a thermodynamic model of the ASHP, which revealed the maximum biogas yield to be approximately 0.585 L.gVS^-1.day^-1 at an optimal temperature of 55 °C (thermophilic). Subsequently, life cycle assessment showed that ASHP-based AD heating systems achieved 28.1 % (thermophilic) and 36.8 % (mesophilic) carbon abatement than the baseline system.

Interpretable machine learning to model biomass and waste gasification

Machine learning has been regarded as a promising method to better model thermochemical processes such as gasification. However, their black box nature can limit how much one can trust and learn from the developed models. Here seven different machine learning methods have been adopted to model the gasification of biomass and waste across a wide range of operating conditions. Gradient boosting regression has been found to outperform the other model types with a coefficient of determination (R2) of 0.90 when averaged across ten key gasification outputs. Global and local model interpretability methods have been used to illuminate the developed black box models. The studied models were most strongly influenced by the feedstock's particle size and the type of gasifying agent employed. By combining global and local interpretability methods, the understanding of black box models has been improved. This allows policy makers and investors to make more educated decisions about gasification process design.

[Research advances on burn blister fluid]

Burns often cause the damaged tissue to produce a large amount of exudate and the formation of blisters on the wound. The burn blister fluid contains a large number of molecules related to wound healing, which can reflect the state of local tissue microenvironment of the burn wound. Analyzing relevant information such as cellular components, signal mediators, and protein molecules in burn blister fluid is helpful to understand the local reaction and tissue microenvironment of burn wounds, and then help clinical burn treatment. In this article, by understanding the production mechanism of burn blister fluid, discussing its role in wound evaluation, and integrating the research progress of burn blister fluid in proteomics, metabolomics, cellular components, and pharmacokinetics, we propose our thoughts and prospects on the research of burn blister fluid, in order to provide assistance for clinical evaluation and treatment of burn wounds, and also provide idea for the follow-up study of burn blister fluid.

Towards understanding respiratory particle transport and deposition in the human respiratory system: Effects of physiological conditions and particle properties

Fly ash is a common solid residue of incineration plants and poses a great environmental concern because of its toxicity upon inhalation exposure. The inhalation health impacts of fly ash is closely related to its transport and deposition in the human respiratory system which warrants significant research for health guideline setting and inhalation exposure protection. In this study, a series of fly ash transport and deposition experiments have been carried out in a bifurcation airway model by optical aerosol sampling analysis. Three types of fly ash samples of different morphologies were tested and their respiratory deposition and transport processes were compared. The deposition efficiencies were calculated and relevant transport dynamics mechanisms were discussed. The influences of physiological conditions such as breathing rate, duration, and fly ash physical properties (size, morphology, and specific surface area) were investigated. The deposition characteristics of respiratory particles containing SARS-CoV-2 has also been analyzed, which could further provide some guidance on COVID-19 prevention. The results could potentially serve as a basis for setting health guidelines and recommending personal respiratory protective equipment for fly ash handlers and people who are in the high exposure risk environment for COVID-19 transmission.

Potato peel waste for fermentative biohydrogen production using different pretreated culture

How to manage potato peel waste sustainably has been an issue faced by the potato industry. This work explored the feasibility of potato peel waste for biohydrogen production via dark fermentation, and investigated the effects of various inoculum enrichment methods (acid, aeration, heat-shock and base) on the process efficiency. It was observed that the hydrogen production showed a great variation when using various inoculum enrichment methods, and the aeration enriched inoculum obtained the maximum hydrogen yield of 71.0 mL/g-VS_added and VS removal of 28.9 %. Different enriched cultures also exhibited huge variations in the bacterial community structure and metabolic pathway. The highest abundance of Clostridium sensu stricto fundamentally contributed to the highest process efficiency for the fermenter inoculated with aeration treated culture. This work puts forward a promising strategy for recycling potato peel waste, and fills a gap in the optimal inoculum preparation method for biohydrogen fermentation of potato peel waste.

Process water recirculation for catalytic hydrothermal carbonization of anaerobic digestate: Water-Energy-Nutrient Nexus

The process water (PW) from acid-catalyzed hydrothermal carbonization (HTC) is still an environmental burden due to the enriched organics, nutrients, and salts. This study proposed a novel strategy to valorize food waste digestate into multifunctional hydrochar by recirculating the PW in the HCl-catalyzed HTC process. The produced multifunctional hydrochar could be utilized as a high-quality solid fuel with HHV of 27.9 MJ kg^-1 (hydrochar without PW recirculation) and a slow-release fertilizer by converting the complex Ca and P compounds from the food waste digestate into a Ca-P deposit (hydroxyapatite) with more than a 93 % P recovery rate (hydrochar with PW recirculation). Adding fresh HCl in the HTC PW recirculation system only displayed a marginal catalytic impact on the hydrochar properties after two cycles of recirculation. This study demonstrated the importance of inherent Ca in the feedstocks and the dual role of HCl in the HTC with PW recirculation.

Sustainable management of plastic wastes in COVID-19 pandemic: The biochar solution

To prevent the COVID-19 transmission, personal protective equipment (PPE) and packaging materials have been extensively used but often managed inappropriately, generating huge amount of plastic waste. In this review, we comprehensively discussed the plastic products utilized and the types and amounts of plastic waste generated since the outbreak of COVID-19, and reviewed the potential treatments for these plastic wastes. Upcycling of plastic waste into biochar was addressed from the perspectives of both environmental protection and practical applications, which can be verified as promising materials for environmental protections and energy storages. Moreover, novel upcycling of plastic waste into biochar is beneficial to mitigate the ubiquitous plastic pollution, avoiding harmful impacts on human and ecosystem through direct and indirect micro-/nano-plastic transmission routes, and achieving the sustainable plastic waste management for value-added products, simultaneously. This suggests that the plastic waste could be treated as a valuable resource in an advanced and green manner.

Life-cycle assessment of pyrolysis processes for sustainable production of biochar from agro-residues

Net carbon management of agro-residues has been an important pathway for reducing the environmental burdens of agricultural production. Converting agro-residues into biochar through pyrolysis is a prominent management strategy for achieving carbon neutrality in a circular economy, meeting both environmental and social concerns. Based on the latest studies, this study critically analyzes the life cycle assessment (LCA) of biochar production from different agro-residues and compares typical technologies for biochar production. Although a direct comparison of results is not always feasible due to different functional units and system boundaries, the net carbon sequestration potential of biochar technology is remarkably promising. By pyrolyzing agro-residues, biochar can be effectively produced and customized as: (i) alternative energy source, (ii) soil amendment, and (iii) activated carbon substitution. The combination of life cycle assessment and circular economy modelling is encouraged to achieve greener and sustainable biochar production.

Machine learning assisted prediction of biochar yield and composition via pyrolysis of biomass

Biochar production via pyrolysis of various organic waste has potential to reduce dependence on conventional energy sources and mitigate global warming potential. Existing models for predicting biochar yield and compositions are computationally-demanding, complex, and have low accuracy for extrapolative scenarios. Here, two data-driven machine learning models based on Multi-Layer Perceptron Neural Network and Artificial Neuro-Fuzzy Inference System are developed. The data-driven models predict biochar yield and compositions for a variety of input feedstock compositions and pyrolysis process conditions. Feature importance assessment of the input dataset revealed their competitive significance for predicting biochar yield and compositions. Overall, the predictive accuracy of the models was up to 12.7% better than the Random Forest and eXtreme Gradient Boosting machine learning algorithms reported in the literature. The models developed are valuable for environmental footprint assessment of biochar production and rapid system optimization.

Life cycle assessment of waste-to-hydrogen systems for fuel cell electric buses in Glasgow, Scotland

Waste-to-hydrogen (WtH) technologies are proposed as a dual-purpose method for simultaneous non-fossil-fuel based hydrogen production and sustainable waste management. This work applied the life cycle assessment approach to evaluate the carbon saving potential of two main WtH technologies (gasification and fermentation) in comparison to the conventional hydrogen production method of steam methane reforming (SMR) powering fuel cell electric buses in Glasgow. It was shown that WtH technologies could reduce CO₂-eq emissions per kg H₂ by 50-69% as compared to SMR. Gasification treating municipal solid waste and waste wood had global warming potentials of 4.99 and 4.11 kg CO₂-eq/kg H₂ respectively, which were lower than dark fermentation treating wet waste at 6.6 kg CO₂-eq/kg H₂ and combined dark and photo fermentation at 6.4 kg CO₂-eq/kg H₂. The distance emissions of WtH-based fuel cell electric bus scenarios were 0.33-0.44 kg CO₂-eq/km as compared to 0.89 kg CO₂-eq/km for the SMR-based scenario.

Life cycle assessment of biodiesel production from rapeseed oil: Influence of process parameters and scale

Biodiesel has the potential to mitigate the fossil fuel-related carbon emission and energy insecurity challenges. There are limited studies examining the impacts of biodiesel production scales on the environmental impacts, while such information will be valuable for guiding practical system design. This work applied the approach of life cycle assessment to evaluate the environmental impacts of biodiesel production from rapeseed oil which accounts for 80% of the European biofuel market. It was shown that the centralized large-scale and localized small-scale biodiesel production schemes have annual global warming potential (GWP) of 2.63 and 2.88 tCO₂-eq/t biodiesel, where the rapeseed agriculture stage caused more than 65% carbon emissions. Sensitivity analysis revealed a high dependence of GWP on rapeseed yields, glycerol re-utilization strategy, and nitrogen nutrient in fertilizer. An alternative scenario was proposed for the large- and small-scale systems that could reduce carbon emissions by 14.1% and 33.6%.

[Chaihu Guizhi Decoction plus or minus formula combined with capecitabine inhibits IL-6/STAT3 signaling to suppress triple-negative breast cancer xenografts in nude mice]

OBJECTIVE

To investigate the effect of Chaihu Guizhi Decoction (CHGZD) combined with capecitabine on growth and apoptosis of subcutaneous triple-negative breast cancer xenografts in nude mice and explore the possible mechanism.

METHODS

Nude mouse models bearing subcutaneous triple-negative breast cancer xenografts were randomized into 6 groups (n=10) for treatment with distilled water (model group), low (10.62 g/kg), medium (21.23 g/kg) and high (42.46 g/kg) doses of CHGZD, capecitabine (0.2 mg/kg), or the combination of CHGZD (42.46 g/kg) and capecitabine (0.2 mg/k) once daily for 21 consecutive days. The general condition of mice was observed, and after 21-day treatments, the tumors were dissected for measurement of tumor volume and weight and histopathological examination with HE staining. Serum IL-6 levels of the mice were determined with enzyme-linked immunosorbent assay (ELISA), and the expression levels of IL-6, STAT3, p-STAT3, Bax, Bcl-2 and cyclin D1 in the tumor tissues were detected using real-time PCR and Western blotting.

RESULTS

Compared with those in the model group, the tumor-bearing mice receiving treatments with CHGZD showed significantly increased food intake with good general condition, sensitive responses, increased body weight, and lower tumor mass (P < 0.01). Compared with capecitabine treatment alone, treatment with CHGZD alone at the medium and high doses and the combined treatment all resulted in significantly higher tumor inhibition rates (P < 0.01), induced obvious tumor tissue degeneration and reduced the tumor cell density. Treatments with CHGZD, both alone and in combination with capecitabine, significantly decreased serum IL-6 level, lowered the mRNA expression levels of IL-6 and STAT3, the protein expressions of IL-6, STAT3 and P-STAT3 (P < 0.05), and the mRNA and protein expressions of Bcl-2 and cyclin D1 (P < 0.05), and increased the mRNA and protein expressions of Bax in the tumor tissues (P < 0.05).

CONCLUSION

CHGZD combined with capecitabine can significantly inhibit tumor growth in nude mice bearing triple-negative breast cancer xenografts, the mechanism of which may involve the inhibition of IL-6/STAT3 signaling pathway and regulation of Bax, Bcl-2 and cyclin D1 expressions to suppress tumor cell proliferation and differentiation and induce cell apoptosis.

Carbon-based catalyst for environmental bioremediation and sustainability: Updates and perspectives on techno-economics and life cycle assessment

Global rise in the generation of waste has caused an enormous environmental concern and waste management problem. The untreated carbon rich waste serves as a breeding ground for pathogens and thus strategies for production of carbon rich biochar from waste by employing different thermochemical routes namely hydrothermal carbonization, hydrothermal liquefaction and pyrolysis has been of interest by researchers globally. Biochar has been globally produced due to its diverse applications from environmental bioremediation to energy storage. Also, several factors affect the production of biochar including feedstock/biomass type, moisture content, heating rate, and temperature. Recently the application of biochar has increased tremendously owing to the cost effectiveness and eco-friendly nature. Thus this communication summarized and highlights the preferred feedstock for optimized biochar yield along with the factor influencing the production. This review provides a close view on biochar activation approaches and synthesis techniques. The application of biochar in environmental remediation, composting, as a catalyst, and in energy storage has been reviewed. These informative findings were supported with an overview of lifecycle and techno-economical assessments in the production of these carbon based catalysts. Integrated closed loop approaches towards biochar generation with lesser/zero landfill waste for safeguarding the environment has also been discussed. Lastly the research gaps were identified and the future perspectives have been elucidated.

Sustainable biochar: A facile strategy for soil and environmental restoration, energy generation, mitigation of global climate change and circular bioeconomy

The increasing agro-demands with the burgeoning population lead to the accumulation of lignocellulosic residues. The practice of burning agri-residues has consequences viz. Release of soot and smoke, nutrient depletion, loss of soil microbial diversity, air pollution and hazardous effects on human health. The utilization of agricultural waste as biomass to synthesize biochar and biofuels, is the pertinent approach for attaining sustainable development goals. Biochar contributes in the improvement of soil properties, carbon sequestration, reducing greenhouse gases (GHG) emission, removal of organic and heavy metal pollutants, production of biofuels, synthesis of useful chemicals and building cementitious materials. The biochar characteristics including surface area, porosity and functional groups vary with the type of biomass consumed in pyrolysis and the control of parameters during the process. The major adsorption mechanisms of biochar involve physical-adsorption, ion-exchange interactions, electrostatic attraction, surface complexation and precipitation. The recent trend of engineered biochar can enhance its surface properties, pH buffering capacity and presence of desired functional groups. This review focuses on the contribution of biochar in attaining sustainable development goals. Hence, it provides a thorough understanding of biochar's importance in enhancing soil productivity, bioremediation of environmental pollutants, carbon negative concretes, mitigation of climate change and generation of bioenergy that amplifies circular bioeconomy, and concomitantly facilitates the fulfilment of the United Nation Sustainable Development Goals. The application of biochar as seen is primarily targeting four important SDGs including clean water and sanitation (SGD6), affordable and clean energy (SDG7), responsible consumption and production (SDG12) and climate action (SDG13).

Trends in mitigation of industrial waste: Global health hazards, environmental implications and waste derived economy for environmental sustainability

Majority of industries, in order to meet the technological development and consumer demands generate waste. The untreated waste spreads out toxic and harmful substances in the environment which serves as a breeding ground for pathogenic microorganisms thus causing severe health hazards. The three industrial sectors namely food, agriculture, and oil industry are among the primary organic waste producers that affect urban health and economic growth. Conventional treatment generates a significant amount of greenhouse gases which further contributes to global warming. Thus, the use of microbes for utilization of this waste, liberating CO₂ offers an indispensable tool. The simultaneous production of value-added products such as bioplastics, biofuels, and biosurfactants increases the economics of the process and contributes to environmental sustainability. This review comprehensively summarized the composition of organic waste generated from the food, agriculture, and oil industry. The linkages between global health hazards of industrial waste and environmental implications have been uncovered. Stare-of-the-art information on their subsequent utilization as a substrate to produce value-added products through bio-routes has been elaborated. The research gaps, economical perspective(s), and future research directions have been identified and discussed to strengthen environmental sustainability.

Economic and environmental assessment of organic waste to biomethane conversion

Biomethane and biofertilizer production by anaerobic co-digestion of organic waste serves a promising method for reducing the environmental footprint of organic waste management. This study evaluated the techno-economic feasibility and environmental impacts of organic waste to biomethane development in Glasgow, UK using net present value (NPV) analysis and life cycle assessment. Four different biogas upgrading technologies (pressurized water scrubbing, chemical scrubbing, membrane separation, and pressure swing adsorption) were compared. The membrane separation technology-based biomethane production meets 0.8% of the gas demand for Glasgow households with a conversion efficiency of 83%. The organic waste to biomethane development saved up to 264 kg CO_2-eq annually per tonne of waste treated, with an NPV ranged between £-9.0 million and £-12.0 million based on the upgrading technology. High costs for waste collection and transportation are primarily responsible for the negative NPV. Carbon taxes between £31.30 and £58.02 per tonne of CO₂ are needed for economically viable biomethane production.

Enhanced degradation of ultra-violet stabilizer Bis(4-hydroxy)benzophenone using oxone catalyzed by hexagonal nanoplate-assembled CoS 3-dimensional cluster

As UV-light stabilizers, Bis(4-hydroxy)benzophenone (BBP), are extensively consumed to quench radicals from photooxidation, continuous release of BPs into the environment poses serious threats to the ecology in view of their xenohormone toxicities, and BBP shall be eliminated from water to avoid its adverse effect. Since sulfate radical (SR)-based chemical oxidation techniques have been proven as effective procedures for eliminating organic emerging contaminants, this study aims to develop useful SR-based procedures through activating Oxone for degrading BBP in water. In contrast to the conventional Co₃O₄, cobalt sulfide (CoS) is particularly proposed as an alternative heterogeneous catalyst for activating Oxone to degrade BBP because CoS exhibits more reactive redox characteristics. As structures of catalysts predominantly control their catalytic activities, in this study, a unique nanoplate-assembled CoS (NPCS) 3D cluster is fabricated via a convenient one-step process to serve as a promising heterogeneous catalyst for activating Oxone to degrade BBP. With NPCS = 100 mg/L and Oxone = 200 mg/L, 5 mg/L of BBP can be completely eliminated in 60 min. The catalytic activity of NPCS towards Oxone activation also significantly surpasses the reference material, Co₃O₄, to enhance degradation of BBP. E_a of BBP degradation by NPCS-activated Oxone is also determined as a relatively low value of 42.7 kJ/mol. The activation mechanism as well as degradation pathway of BBP degradation by NPCS-activated Oxone was investigated and validated through experimental evidences and density functional theory (DFT) calculation to offer valuable insights into degradation behaviors for developing SR-based processes of BBP degradation using CoS catalysts.

Energy, environmental, economic and social equity (4E) pressures of COVID-19 vaccination mismanagement: A global perspective

Vaccination now offers a way to resolve the COVID-19 pandemic. However, it is critical to recognise the full energy, environmental, economic and social equity (4E) impacts of the vaccination life cycle. The full 4E impacts include the design and trials, order management, material preparation, manufacturing, cold chain logistics, low-temperature storage, crowd management and end-of-life waste management. A life cycle perspective is necessary for sustainable vaccination management because a prolonged immunisation campaign for COVID-19 is likely. The impacts are geographically dispersed across sectors and regions, creating real and virtual 4E footprints that occur at different timescales. Decision-makers in industry and governments have to act, unify, resolve, and work together to implement more sustainable COVID-19 vaccination management globally and locally to minimise the 4E footprints. Potential practices include using renewable energy in production, storage, transportation and waste treatment, using better product design for packaging, using the Internet of Things (IoT) and big data analytics for better logistics, using real-time database management for better tracking of deliveries and public vaccination programmes, and using coordination platforms for more equitable vaccine access. These practices raise global challenges but suggest solutions with a 4E perspective, which could mitigate the impacts of global vaccination campaigns and prepare sustainably for future pandemics and global warming.

Are microplastics destabilizing the global network of terrestrial and aquatic ecosystem services?

Plastic has created a new man-made ecosystem called plastisphere. The plastic pieces including microplastics (MPs) and nanoplastics (NPs) have emerged as a global concern due to their omnipresence in ecosystems and their ability to interact with the biological systems. Nevertheless, the long-term impacts of MPs on biotic and abiotic resources are not completely understood, and existing evidence suggests that MPs are hazardous to various keystones species of the global biomes. MP-contaminated ecosystems show reduced floral and faunal biomass, productivity, nitrogen cycling, oxygen-generation and carbon sequestration, suggesting that MPs have already started affecting ecological biomes. However, not much is known about the influence of MPs towards the ecosystem services (ESs) cascade and its correlation with the biodiversity loss. MPs are perceived as a menace to the global ecosystems, but their possible impacts on the provisional, regulatory, and socio-economic ESs have not been extensively studied. This review investigates not only the potentiality of MPs to perturb the functioning of terrestrial and aquatic biomes, but also the associated social, ecological and economic repercussions. The possible long-term fluxes in the ES network of terrestrial and aquatic niches are also discussed.

Interactions between microplastics, pharmaceuticals and personal care products: Implications for vector transport

Microplastics are well known for vector transport of hydrophobic organic contaminants, and there are growing concerns regarding their potential adverse effects on ecosystems and human health. However, recent studies focussing on hydrophilic compounds, such as pharmaceuticals and personal care products (PPCPs), have shown that the compounds ability to be adsorbed onto plastic surfaces. The extensive use of PPCPs has led to their ubiquitous presence in the environment resulting in their cooccurrence with microplastics. The partitioning between plastics and PPCPs and their fate through vector transport are determined by various physicochemical characteristics and environmental conditions of specific matrices. Although the sorption capacities of microplastics for different PPCP compounds have been investigated extensively, these findings have not yet been synthesized and analyzed critically. The specific objectives of this review were to synthesize and critically assess the various factors that affect the adsorption of hydrophilic compounds such as PPCPs on microplastic surfaces and their fate and transport in the environment. The review also focuses on environmental factors such as pH, salinity, and dissolved organics, and properties of polymers and PPCP compounds, and the relationships with sorption dynamics and mechanisms. Furthermore, the ecotoxicological effects of PPCP-sorbed microplastics on biota and human health are also discussed.

Lignin valorization by bacterial genus Pseudomonas: State-of-the-art review and prospects

The most prominent aromatic feedstock on Earth is lignin, however, lignin valorization is still an underrated subject. The principal preparatory strategies for lignin valorization are fragmentation and depolymerization which help in the production of fuels and chemicals. Owing to lignin's structural heterogeneity, these strategies result in product generation which requires tedious separation and purification to extract target products. The bacterial genus Pseudomonas has been dominant for its lignin valorization potency, owing to a robust enzymatic machinery that is used to funnel variable lignin derivatives into certain target products such as polyhydroxyalkanotes (PHAs) and cis, cis-muconic acid (MA). In this review, the potential of genus Pseudomonas in lignin valorization is critically reviewed along with the advanced genetic techniques and tools to ease the use of lignin/lignin-model compounds for the synthesis of bioproducts. This review also highlights the research gaps in lignin biovalorization and discuss the challenges and possibilities for future research.

Pyrolysis of waste biomass and plastics for production of biochar and its use for removal of heavy metals from aqueous solution

The aim of this work was to study the pyrolysis of waste biomass and plastics and use the produced biochar for the removal of heavy metals from aqueous solution. The batch experiments of Fe, Ni, Cu, Cr, Cd and Pb with biochars and plastic chars were carried for determining the effects of various experimental parameters (feedstock, contact time, adsorbent dose, pH and pyrolysis temperature). The isothermal sorption models demonstrated that the sorption capacities of biochars are higher in comparison to the plastic chars. The maximum removal efficiency shown by biochars and plastic chars at pH 4 was 99.86% and 99.93%, respectively. Both the carbon materials are thereby recognized as an environment-friendly and efficient pollutant control material at various studied parameters.

Bio-based rhamnolipids production and recovery from waste streams: Status and perspectives

Bio-based rhamnolipid production from waste streams is gaining momentum nowadays because of increasing market demand, huge range of applications and its economic and environment friendly nature. Rhamnolipid type biosurfactants are produced by microorganisms as secondary metabolites and have been used to reduce surface/interfacial tension between two different phases. Biosurfactants have been reported to be used as an alternative to chemical surfactants. Pseudomonas sp. has been frequently used for production of rhamnolipid. Various wastes can be used in production of rhamnolipid. Rhamnolipids are widely used in various industrial applications. The present review provides information about structure and nature of rhamnolipid, production using different waste materials and scale-up of rhamnolipid production. It also provides comprehensive literature on various industrial applications along with perspectives and challenges in this research area.

Microbial degradation of dyes: An overview

Industrialization increases use of dyes due to its high demand in paper, cosmetic, textile, leather and food industries. This in turn would increase wastewater generation from dye industrial activities. Various dyes and its structural compounds present in dye industrial wastewater have harmful effects on plants, animals and humans. Synthetic dyes are more resistant than natural dyes to physical and chemical methods for remediation which makes them more difficult to get decolorize. Microbial degradation has been researched and reviewed largely for quicker dye degradation. Genetically engineered microorganisms (GEMs) play important role in achieving complete dye degradation. This paper provides scientific and technical information about dyes & dye intermediates and biodegradation of azo dye. It also compiles information about factors affecting dye(s) biodegradation, role of genetically modified organisms (GMOs) in process of dye(s) degradation and perspectives in this field of research.

Life cycle assessment of bio-based levoglucosan production from cotton straw through fast pyrolysis

This study aimed to evaluate the environmental impacts (i.e. global warming potential (GWP) and resource depletion (RD)) of the bio-based levoglucosan production process through fast pyrolysis of cotton straw via life cycle assessment (LCA). An LCA model consisting of feedstock transportation, biomass pretreatment, fast pyrolysis, bio-oil transportation, bio-oil recovery and levoglucosan extraction was developed. Results indicated that GWP and RD of bio-based levoglucosan production were approximately 2 and 32.5 times less than that of the petroleum-based counterpart. Sensitivity analysis showed that the GWP and RD of levoglucosan production were highly sensitive to plant size, hydrochloric acid usage, cooling energy, levoglucosan yield and bio-oil yield. The results of this research could provide a framework for robust decision making at an industrial level, which is useful for the commercial-scale production of levoglucosan.

Life cycle assessment and net present worth analysis of a community-based food waste treatment system

Food waste management has been a global challenge with significant economic and environmental impacts. A community-based food waste treatment scheme for Glasgow, UK is proposed. The food waste was treated by small-scale wet, mesophilic anaerobic digestion. Biogas was combusted in a combined heat and power plant to generate heat and electricity for each community. 201.39 kWh of electricity and 246.09 kWh of thermal energy could be provided to local communities per tonne of food waste treated. A total of 52,762 tonnes of food waste were produced each year in the city. Net-present worth analysis was employed to evaluate the scheme's economic feasibility. The scheme's environmental impacts were evaluated using life cycle assessment. The entire system saved 92.27 kg CO2-eq. per tonne of food waste treated and had a net-present worth of £ 3.187 million with a carbon tax of 50 £ tonne-1 and a biogas yield of 190 m3 tonne-1.

Plasma C-type lectin-like receptor 2 as a predictor of death and vascular events in patients with acute ischemic stroke

BACKGROUND AND PURPOSE

C-type lectin-like receptor 2 (CLEC-2) has prominent involvement in platelet activation, which is increased in coronary heart disease and acute ischaemic stroke (AIS) and is associated with stroke progression and stroke prognosis. Here, the aim was to examine the prognostic value of CLEC-2 in death and vascular event recurrence in AIS patients.

METHODS

In all, 352 patients with AIS were studied prospectively. All patients were followed up for 1 year. Death for all vascular events and a combination of death and vascular diseases (recurrent stroke, myocardial infarction, hospitalized and treated angina, hospitalized and treated peripheral arterial disease) were recorded.

RESULTS

During 1 year of follow-up, 46 patients (14.2%) experienced death or combined end-points (23 death and 46 combined end-points). Plasma CLEC-2 (pCLEC-2) was significantly associated with an increased risk of death and combined events of death and vascular diseases after adjusting for age, sex, history of hypertension, diabetes mellitus and coronary artery disease, and National Institutes of Health Stroke Scale scores. Each 1 SD higher log-transformed pCLEC-2 was associated with a 4.27-fold (hazard ratio 4.27, 95% confidence interval 1.71-10.65) increased risk for death and a 2.42-fold increased risk for combined end-points (hazard ratio 2.42, 95% confidence interval 1.52-3.86). The optimal cut-off point of pCLEC-2 for predicting death was 184.38 pg/ml.

CONCLUSIONS

Higher pCLEC-2 levels at admission were associated with increased risk of death and combined events of death and vascular diseases in patients with AIS, which indicated that pCLEC-2 is an important prognostic factor for AIS.

Techno-economic analysis of geopolymer production from the coal fly ash with high iron oxide and calcium oxide contents

In this work, we firstly examined the technical feasibility of geopolymer synthesis from the coal fly ash with high iron oxide (48.84 wt.%) and calcium oxide (22.15 wt.%) contents. The heat resistance of geopolymer was represented by the dry weight loss which ranged from 2.5 to 4.9% and was better than that (11.7%) of OPC. However, the high iron oxide content made the acid resistance (13-14%) of geopolymer inferior to OPC. The economics of geopolymer production changes significantly upon the variation in the arrangement of material use and geopolymer price. The costs of Na₂SiO₃ and NaOH and the benefit of geopolymer selling were the major factors affecting the economic feasibility of geopolymer production. When the Na₂SiO₃ price was around 400 USD/ton, the geopolymer production will be profitable even if the geopolymer price was as low as 50 USD/ton. It is possible to improve the economics of geopolymer production by varying the arrangement of material use while not impairing the performance of geopolymer.