Electrochemical and PM-IRRAS studies of the effect of cholesterol on the structure of a DMPC bilayer supported at an Au (111) electrode surface, part 1: properties of the acyl chains

Revealing local molecular distribution, orientation, phase separation, and formation of domains in artificial lipid layers: Towards comprehensive characterization of biological membranes

Lipids, together with molecules such as DNA and proteins, are one of the most relevant systems responsible for the existence of life. Selected lipids are able to assembly into various organized structures, such as lipid membranes. The unique properties of lipid membranes determine their complex functions, not only to separate biological environments, but also to participate in regulatory functions, absorption of nutrients, cell-cell communication, endocytosis, cell signaling, and many others. Despite numerous scientific efforts, still little is known about the reason underlying the variability within lipid membranes, and its biochemical significance. In this review, we discuss the structural complexity of lipid membranes, as well as the importance to simplify studied systems in order to understand phenomena occurring in natural, complex membranes. Such systems require a model interface to be analyzed. Therefore, here we focused on analytical studies of artificial systems at various interfaces. The molecular structure of lipid membranes, specifically the nanometric thickens of molecular bilayer, limits in a major extent the choice of highly sensitive methods suitable to study such structures. Therefore, we focused on methods that combine high sensitivity, and/or chemical selectivity, and/or nanometric spatial resolution, such as atomic force microscopy, nanospectroscopy (tip-enhanced Raman spectroscopy, infrared nanospectroscopy), phase modulation infrared reflection-absorption spectroscopy, sum-frequency generation spectroscopy. We summarized experimental and theoretical approaches providing information about molecular structure and composition, lipid spatial distribution (phase separation), organization (domain shape, molecular orientation) of lipid membranes, and real-time visualization of the influence of various molecules (proteins, drugs) on their integrity. An integral part of this review discusses the latest achievements in the field of lipid layer-based biosensors.

Membrane Potentials Trigger Molecular-Scale Rearrangements in the Outer Membrane of Gram-Negative Bacteria

The structural complexity of the cell envelope of Gram-negative bacteria limits the fabrication of realistic models of bacterial cell membranes. A vertical Langmuir-Blodgett withdrawing was used to deposit a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) monolayer on the Au(111) surface. The second leaflet composed of di[3-deoxy-D-manno-octulosonyl]-lipid A (KLA) was deposited using Langmuir-Schaefer transfer. The use of an electrode material as a support for the POPE-KLA bilayer allowed electrochemical control of the membrane's stability, compactness, and structure. Capacitance-potential curves showed a typical pattern for the supported lipid bilayers electrochemical characteristic. The minimum membrane capacitance was ∼4 μF cm^-2 and did not change in the following desorption-adsorption cycles, indicating the presence of a stable bilayer structure with an asymmetric composition of both leaflets. However, at a molecular scale, as elucidated in spectroelectrochemical experiments, large differences in the response of both leaflets to electric potentials were observed. The acyl chains in POPE and KLA existed in a liquid state. The quantitative analysis of the CH stretching modes indicated potential-driven reorientations in the hydrophobic fragment of the bilayer, already in the adsorbed state. To assign observed rearrangements to POPE and KLA lipids in both leaflets, per-deuterated d₃₁-POPE was transferred into the inner leaflet. Since no potential-dependent changes of the CD₂ stretching modes in the d₃₁-POPE-KLA bilayer were observed, reorientations in the acyl chain region were assigned to the KLA molecules. Mg²⁺ ions were bound to the polar head groups of KLA. The strength of electrostatic interactions in the polar head group region of KLA was dependent on the direction of the electric field. At negative electric potentials, the binding of divalent cations weakened, which gave the KLA molecules increased orientational flexibility. This behavior in electric fields is peculiar for the outer membrane and indicates that the microbial cell membranes have different electrochemical properties than phospholipid bilayers.

Influence of lipophilicity of anthracyclines on the interactions with cholesterol in the model cell membranes - Langmuir monolayer and SEIRAS studies

The interactions of anthracyclines with biological membranes strongly depend on the drug lipophilicity, which might also determine the specific affinity to cholesterol molecules. Therefore, in this work we show the studies concerning the effect of two selected anthracyclines, daunorubicin (DNR) and idarubicin (IDA) on simple models of healthy (DMPC:Chol 7:3) and cancer cells membranes with increased level of cholesterol (DMPC:Chol 3:7) as well as pure cholesterol monolayers prepared at the air-water interface and supported on gold surface. It has been shown that more lipophilic IDA is able to penetrate cholesterol monolayers more effectively than DNR due to the formation of IDA-cholesterol arrangements at the interface, as proved by the thermodynamic analysis of compression-expansion cycles. The increased interactions of IDA were also confirmed by the time measurements of pre-compressed monolayers exposed to drug solutions as well as grazing incidence X-ray diffraction studies demonstrating differences in the 2D organization of cholesterol monolayers. Langmuir studies of mixed DMPC:Chol membranes revealed the reorganization of molecules in the cancer cell models at the air-water interface at higher surface pressures due to the removal of DNR, while increased affinity of IDA towards cholesterol allowed this drug to penetrate the layer more efficiently without its removal. The SEIRAS spectra obtained for supported DMPC:Chol bilayers proved that IDA locates both in the ester group and in the acyl chain region of the bilayer, while DNR does not penetrate the membranes as deeply as IDA. The increased penetration of the mixed phospholipid layers by idarubicin might be attributed to the higher lipophilicity caused by the lack of methoxy group and resulting in a specific affinity towards cholesterol.

A quantitative determination of lipid bilayer deposition efficiency using AFM

The efficacy of a number of different methods for depositing a dimyristoylphosphatidylcholine (DMPC) lipid bilayer or DMPC-cholesterol (3 : 1) mixed bilayer onto a silicon substrate has been investigated in a quantitative manner using atomic force microscopy (AFM) image analysis to extract surface coverage. Complementary AFM-IR measurements were used to confirm the presence of the lipids. For the Langmuir-Blodgett/Schaefer deposition method at temperatures below the chain-melting transition temperature (T m), a large number of bilayer defects resulted when DMPC was deposited from a water subphase. Addition of calcium ions to the trough led to smaller, more frequent defects, whereas addition of cholesterol to the lipid mixture led to a vast improvement in bilayer coverage. Poor coverage was achieved for deposition at temperatures above T m. Formation of the deposited bilayer from vesicle fusion proved a more reliable method for all systems, with formation of near-complete bilayers within 60 seconds at temperatures above T m, although this method led to a higher probability of multilayer formation and rougher bilayer surfaces.

Incorporation of simvastatin into lipid membranes: Why deliver a statin in form of inclusion complex with hydrophilic cyclodextrin

In this work, the effects of simvastatin (SIM), (2-hydroxypropyl)-β-cyclodextrin (HPβCD) and their complex (SIM:HPβCD) on the structure and properties of lipid membranes were investigated for the first time by Langmuir technique combined with PM-IRRAS spectroscopy. An improved understanding of the differences of the interactions between free SIM, and SIM in the form of an inclusion complex with HPβCD with the lipid membrane will improve the development of preparation methods for in vivo applications. Monolayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), cholesterol (Chol) and their mixture DMPC:Chol (7:3) served as simple models of one leaflet of the cell membrane. The penetration of well-organized lipid layers by simvastatin lead to their fluidization but the extent of this unwanted effect was smaller when the drug was delivered in the form of the SIM:HPβCD complex. Surface pressure vs. time dependencies showed that the drug encapsulated with cyclodextrin dissociated from the complex upon contact with the lipid layer and the weak interactions between the exterior polar part of the HPβCD and the polar headgroups of the lipid layer facilitated smooth incorporation of the released lipophilic drug into the membrane. At a longer time-scale, the HPβCD ligand released from the complex removed some cholesterol, but not DMPC, from the lipid layer, hence, similarly to the enzyme inhibiting action of statins - it lead to the decrease of the amount of cholesterol in the membrane. Delivery of simvastatin in the form of an inclusion complex with HPβCD is proposed as an approach improving its bioavailability in the cholesterol-lowering therapies.

Nanoscale Probing of Cholesterol-Rich Domains in Single Bilayer Dimyristoyl-Phosphocholine Membranes Using Near-Field Spectroscopic Imaging

Cholesterol is believed to induce the formation of membrane domains, "rafts", which are implicated in a range of natural and pathologic membrane processes. Therefore, it is important to understand the role that cholesterol plays in the formation of these structures. Here, we use label-free spectroscopic imaging to investigate cholesterol fractioning in supported bilayer membranes at nanoscale. Scattering-type scanning near-field optical microscopy (s-SNOM) was used to visualize the formation of cholesterol-induced domains in 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membranes. Our results revealed the coexistence of phase separated domains in DMPC lipids with 10 mol % cholesterol content, whereas a mostly homogeneous bilayer was found at low (5 mol %) and high (15 mol %) cholesterol content. Near-field nano-FTIR spectroscopy was used to identify the cholesterol-rich domains based on their qualitative chemical compositions. It was determined that cholesterol binds to phosphodiester and alkyl glycerol ester moieties, likely via hydrogen bonding of the alcohol to either of the ester oxygens. The results also confirm the existence of an ideal cholesterol-lipid mixture ratio (∼15:85) with a geometrically defined packing. At lower cholesterol content there is phase separation between liquid ordered and almost neat DMPC domains. Thus, the liquid ordered phase exists at an energy minimum at a given lipid-cholesterol ratio.

Cellular absorption of small molecules: free energy landscapes of melatonin binding at phospholipid membranes

Free energy calculations are essential to unveil mechanisms at the atomic scale such as binding of small solutes and their translocation across cell membranes, eventually producing cellular absorption. Melatonin regulates biological rhythms and is directly related to carcinogenesis and neurodegenerative disorders. Free energy landscapes obtained from well-tempered metadynamics simulations precisely describe the characteristics of melatonin binding to specific sites in the membrane and reveal the role of cholesterol in free energy barrier crossing. A specific molecular torsional angle and the distance between melatonin and the center of the membrane along the normal to the membrane Z-axis have been considered as suitable reaction coordinates. Free energy barriers between two particular orientations of the molecular structure (folded and extended) have been found to be of about 18 kJ/mol for z-distances of about 1–2 nm. The ability of cholesterol to expel melatonin out of the internal regions of the membrane towards the interface and the external solvent is explained from a free energy perspective. The calculations reported here offer detailed free energy landscapes of melatonin embedded in model cell membranes and reveal microscopic information on its transition between free energy minima, including the location of relevant transition states, and provide clues on the role of cholesterol in the cellular absorption of small molecules.

PM-IRRAS Study on the Effect of Phytantriol-Based Cubosomes on DMPC Bilayers as Model Lipid Membranes

The effect of phytantriol (PT)-based liquid-crystalline nanoparticles, cubosomes, on the lipid bilayer membranes has been investigated using the combined Langmuir-Blodgett/Langmuir-Schaefer (LB-LS) technique to form an h-1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) monolayer at the air-water interface and transfer the lipid bilayer onto the Au(111) substrate. Changes of the compression isotherms confirmed incorporation of cubosomes dispersed in the subphase into the h-DMPC monolayer at the air-water interface. The photon polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) measurements of the gold electrode covered by the transferred DMPC bilayer showed for the first time how the incorporation of cubosome material affects the orientation and conformation of lipid molecules in the membrane. Exposure to cubosomes affected the packing of d₅₄-DMPC bilayers and introduced disorder of chains by increasing the contribution of gauche conformation. The decrease of the tilt angle of the acyl chains of adsorbed DMPC in the whole range of potentials applied to the gold electrode confirmed that incorporation of cubosome material results in a more tightly packed bilayer. The presence of phytantriol molecules within the d₆₃-DMPC matrix was confirmed by PM-IRRAS studies of the PT-related bands. The LB and PM-IRRAS studies demonstrated in a convincing way that PT-based cubosomes change the organization of model lipid layers leading to structural changes of the membranes which have to be taken into consideration when PT-cubosomes are employed as drug carriers.

The shape of lipid molecules affects potential-driven molecular-scale rearrangements in model cell membranes on electrodes

Planar asymmetric lipid bilayers composed of phosphatidylethanolamine and phosphatidylglycerol lipids are transferred onto a gold electrode surface. Lipids containing two saturated, one monounsaturated and two monounsaturated hydrocarbon chains compose the model membranes. Results of electrochemically controlled polarization modulation infrared reflection absorption spectroscopy and quartz crystal microbalance with energy dissipation studies reveal two different types of electric potential-dependent structural rearrangements in the bilayers. They are correlated with the geometry of the lipid molecule. Packing parameter correlates the cross-section area of the hydrophobic and hydrophilic parts of amphiphilic molecules. In bilayers composed of lipids with the packing parameter <1, the hydrocarbon chains are tilted with respect to the bilayer plane and the polar head groups are well hydrated. At a threshold potential an abrupt flow of water through the bilayer is connected with membrane dehydration and upward orientation of the chains. In bilayers composed of lipids with packing parameter ≥1, electric potentials have negligible effect on the membrane structure. A simple rule correlating the packing parameter with molecular scale changes occurring at electrified membranes has a large diagnostic implication for biomimetic studies and our understanding of molecular processes occurring in biological cell membranes.

Impact of the protein myristoylation on the structure of a model cell membrane in a protein bound state

The neuronal calcium sensor protein recoverin is expressed in retinal rod and cone cells and is involved in the calcium-dependent control of receptor (rhodopsin) phosphorylation and receptor inactivation. In its Ca²⁺-saturated form recoverin is attached to membranes by an exposed myristoyl group and responds to oscillating changes of intracellular Ca²⁺-concentration by performing a so-called Ca²⁺-myristoyl switch. In this work we analyze changes in a liquid lipid bilayer interacting with myristoylated and non-myristoylated recoverin by employing polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) with electrochemical control. The lipid bilayer is transferred onto a polycrystalline gold electrode using Langmuir-Blodgett Langmuir-Schaefer transfer at the surface pressure π = 30 mN m^-1 which ensures, necessary for the lipid-protein interaction, liquid state of the hydrocarbon chains of phospholipids. The model lipid bilayers are adsorbed directly on the Au electrode surface at transmembrane potentials -0.2 < ∆ϕM|S < 0.25 V. The interaction with recoverin leads to a stabilization of the adsorbed state of the lipid bilayer at positive transmembrane potentials. The interaction leads to a decrease in the surface charge density that accumulates on the membrane covered electrode surface, indicating changes in the lateral interactions in the lipid membrane. In situ spectroelectrochemical studies confirm orientation changes in the hydrophobic environment of the model membrane. Insertion of the myristoyl group of recoverin into the membrane is connected with an increase in the tilt of the hydrocarbon chains with respect to the surface normal and decrease in the bilayer thickness. Potential-induced pore formation and desorption of the lipid bilayer from the membrane surface is accompanied by the removal of the acyl chains of recoverin from the membrane.

In situ PM-IRRAS of a glassy carbon electrode/deep eutectic solvent interface

Firstin situPM-IRRAS studies of a carbon electrode/deep eutectic solvent interface show ad- and desorption of electrolyte components.

Spectroscopic and permeation studies of phospholipid bilayers supported by a soft hydrogel scaffold

Polarized attenuated total reflection infrared (ATR-IR) spectroscopy, fluorescence microscopy, and fluorescence spectroscopy were used to characterize a lipid coating composed of 70 mol % 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 30 mol % cholesterol, supported on a spherical hydrogel scaffold. The fluorescence microscopy images show an association between the lipid coating and the hydrogel scaffold. Fluorescence permeability measurements revealed that the phospholipid coating acts as a permeability barrier, exhibiting characteristics of a lamellar bilayer coating structure. Variable evanescent wave penetration depth ATR-IR spectroscopy studies validated the determination of quantitative molecular orientation information for a lipid coating supported on a spherical scaffold. These polarized ATR-IR studies measured an average DMPC acyl chain tilt angle of ∼21-25°, with respect to the surface normal.

Super-resolved FT-IR spectroscopy: Strategies, challenges, and opportunities for membrane biophysics

Direct correlation of molecular conformation with local structure is critical to studies of protein- and peptide-membrane interactions, particularly in the context of membrane-facilitated aggregation, and disruption or disordering. Infrared spectroscopy has long been a mainstay for determining molecular conformation, following folding dynamics, and characterizing reactions. While tremendous advances have been made in improving the spectral and temporal resolution of infrared spectroscopy, it has only been with the introduction of scanned-probe techniques that exploit the raster-scanning tip as either a source, scattering tool, or measurement probe that researchers have been able to obtain sub-diffraction limit IR spectra. This review will examine the history of correlated scanned-probe IR spectroscopies, from their inception to their use in studies of molecular aggregates, membrane domains, and cellular structures. The challenges and opportunities that these platforms present for examining dynamic phenomena will be discussed. This article is part of a Special Issue entitled: FTIR in membrane proteins and peptide studies.

Atomic force microscopy studies of a floating-bilayer lipid membrane on a Au(111) surface modified with a hydrophilic monolayer

The surface of a gold electrode was functionalized with a hydrophilic monolayer of 1-thio-β-D-glucose formed by spontaneous self-assembly. The Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) method was then used to assemble a bilayer onto the modified Au(111) surface. The bilayer lipid membrane (BLM) was separated from the Au(111) electrode surface by incorporating the monosialoganglioside GM1 into the inner leaflet of a bilayer composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol. To make the inner leaflet, monolayers of GM1/DMPC/cholesterol with mole ratios of 1:6:3, 2:5:3, and 3:4:3 were used. The outer leaflet was composed of a 7:3 mole ratio of DMPC/cholesterol. Because of the amphiphilic properties of GM1, the hydrophobic acyl chains were incorporated into the BLM, whereas the large hydrophilic carbohydrate headgroups were physically adsorbed to the Au(111) electrode surface, creating a "floating" BLM (fBLM). This model contained a water-rich reservoir between the BLM and the gold surface. In addition, because of the bilayer being physically adsorbed onto the support, the fluidity of the BLM was maintained. The compression isotherms were measured at the air/water interface to determine the phase behavior and optimal transfer conditions. The images acquired using atomic force microscopy (AFM) and the force-distance measurements showed that the structure of the fBLM evolved with increasing GM1 content from 10 to 30 mol %, undergoing a transition from a corrugated to a homogeneous phase. This change was associated with a significant increase in bilayer thickness (from ∼5.3 to 7.3 nm). The highest-quality fBLM was produced with 30 mol % GM1.

Electric field driven changes of a gramicidin containing lipid bilayer supported on a Au(111) surface

Langmuir-Blodgett and Langmuir-Schaeffer methods were employed to deposit a mixed bilayer consisting of 90% of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 10% of gramicidin (GD), a short 15 residue ion channel forming peptide, onto a Au(111) electrode surface. This architecture allowed us to investigate the effect of the electrostatic potential applied to the electrode on the orientation and conformation of DMPC molecules in the bilayer containing the ion channel. The charge density data were determined from chronocoulometry experiments. The electric field and the potential across the membrane were determined through the use of charge density curves. The magnitudes of potentials across the gold-supported biomimetic membrane were comparable to the transmembrane potential acting on a natural membrane. The information regarding the orientation and conformation of DMPC and GD molecules in the bilayer was obtained from photon polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) measurements. The results show that the bilayer is adsorbed, in direct contact with the metal surface, when the potential across the interface is more positive than -0.4 V and is lifted from the gold surface when the potential across the interface is more negative than -0.4 V. This change in the state of the bilayer has a significant impact on the orientation and conformation of the phospholipid and gramicidin molecules. The potential induced changes in the membrane containing peptide were compared to the changes in the structure of the pure DMPC bilayer determined in earlier studies.

Building biomimetic membrane at a gold electrode surface

This article describes efforts to build a model biological membrane at a surface of a gold electrode. In this architecture, the membrane may be exposed to static electric fields on the order of 10(7) to 10(8) V m(-1). These fields are comparable in magnitude to the static electric field acting on a natural biological membrane. The field may be conveniently used to manipulate organic molecules within the membrane. By turning a knob on the control instrument one can deposit or lift the membrane from the gold surface. Electrochemical techniques can be used to control the physical state of the film while the infrared reflection absorption spectroscopy (IRRAS), surface imaging by STM and AFM and neutron scattering techniques can be employed to study conformational changes of organic molecules and their ordering within the membrane. This is shown on examples of membranes built of a simple zwitterionic phospholipid such as 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) and a mixed membrane composed of DMPC and cholesterol. The results illustrate the tremendous effect of cholesterol on the membrane structure. Two methods of membrane deposition at the electrode surface, namely by unilamellar vesicles fusion and using the Langmuir-Blodgett technique, are compared. Applications of these model systems to study interactions of small antibiotic peptides with lipids are discussed.

Electrochemical properties of phospholipid monolayers at liquid-liquid interfaces

Biomembrane models built at the interface between two immiscible electrolytes (ITIES) are useful systems to study phenomena of biological relevance by means of their electrochemical processes. The unique properties of ITIES allow one either to control or measure the potential difference across the biomimetic membranes. Herein we focus on phospholipid monolayers adsorbed at liquid-liquid interfaces, and besides discussing recent developments on the subject, we describe electrochemical techniques that can be used to get insight on the interfacial processes and electrostatic properties of phospholipid membranes at the ITIES. In particular, we examine the electrochemical and physicochemical properties of (modified) phospholipid monolayers and their interaction with other biologically relevant compounds. The use of liquid-liquid electrochemistry as a powerful tool to characterize drug properties is outlined. Although this review is not a survey of all the work in the field, it provides a comprehensive referencing to current research.

Influence of an electric field on oriented films of DMPC/gramicidin bilayers: a circular dichroism study

A film of oriented bilayers containing a mixture of gramicidin and dimyristoylphosphatidylcholine (DMPC) has been deposited on a fused-silica window coated with a 10 nm thick gold layer. The thin layer of gold allows the application of an electric potential across the film and the study of its influence on the structure and integrity of the bilayers. Electrochemical measurements, ellipsometry, and far-UV circular dichroism (CD) were employed to characterize the properties of the film of bilayers as a function of the potential applied to the gold electrode. For potentials across the film that are within the range approximately +300 to -150 mV the oriented film of bilayers is stable, and no change in the CD spectra of gramicidin molecule is observed. At more negative potentials, an increase in the film thickness and water content measured by ellipsometry indicated that the film swells and incorporates water, which causes a change in the circular dichroism spectrum of gramicidin molecules in the film. This transformation was interpreted as a change in the average orientation of gramicidin molecules within the film due to a decrease in the ordering of the molecules upon swelling.

A new method for performing polarization modulation infrared reflection-adsorption spectroscopy of surfaces

A new and relatively simple polarization modulation technique is presented and tested that enables the whole spectral range to be detected between 400 and 4000 cm(-1). This experiment is conventionally carried out using a photoelastic modulator that modulates incident plane polarized light through 90 degrees . This suffers from the drawback that it enables spectra to be collected only over a relatively narrow spectral range. As an alternative, a polarizer is placed in the beam and oriented at 45 degrees to the sample normal. This produces incident radiation fluxes with identical intensities for both s- and p-polarized light. A second polarizer is then modulated through 90 degrees and the surface spectrum is then extracted in the usual manner from the difference between these signals, normalized to their sum. The method is demonstrated for a self-assembled monolayer of 11-mercapto-undecanoicacid (11-MUA) on gold on mica, and it is shown that, while the resulting spectra are extremely sensitive to optical alignment, the method yields spectra that are in excellent agreement with published data.

AFM studies of the effect of temperature and electric field on the structure of a DMPC-cholesterol bilayer supported on a Au(111) electrode surface

Atomic force microscopy (AFM) was used to characterize a phospholipid bilayer composed of 70 mol % 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 30 mol % cholesterol, at a Au(111) electrode surface. Results indicate that addition of cholesterol relaxes membrane elastic stress, increases membrane thickness, and reduces defect density. The thickness and thermotropic properties of the mixed DMPC-cholesterol bilayer supported at the gold electrode surface are quite similar to the properties of the mixed membrane in unilamellar vesicles. The stability of the supported membrane at potentials negative to the potential of zero charge E(pzc) was investigated. This study demonstrates that the bilayer supported at the gold electrode surface is stable provided the applied potential (E - E(pzc)) is less than -0.3 V. At larger polarizations, swelling of the membrane is observed. Polarizations larger than -1 V cause electrodewetting of the bilayer from the gold surface. At these negative potentials, the bilayer remains in close proximity to the metal surface, separated from it by a approximately 2 nm thick layer of electrolyte.

Electrochemical and PM-IRRAS a glycolipid-containing biomimetic membrane prepared using Langmuir-Blodgett/Langmuir-Schaefer deposition

Differential capacitance, chronocoulometry, and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) measurements were used to characterize the structure and orientation of a DMPC + cholesterol + GM 1 (60:30:10 mol %) bilayer supported at a Au(111) electrode surface prepared using combined Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) deposition. The electrochemical measurements indicate that the incorporation of ganglioside GM 1 into the membrane significantly improves the quality of the bilayer, reflected in the very low capacitance value of approximately 0.8 microF cm (-2). An analysis of the infrared data suggests that the incorporation of the glycolipid into the membrane changes both the orientation of the lipid acyl chains in the membrane and the hydration of the membrane, particularly with respect to the interfacial region of the lipids.

AFM studies of solid-supported lipid bilayers formed at a Au(111) electrode surface using vesicle fusion and a combination of Langmuir-Blodgett and Langmuir-Schaefer techniques

Atomic force microscopy (AFM) has been used to characterize the formation of a phospholipid bilayer composed of 1,2-dimyristyl-sn-glycero-3-phosphocholine (DMPC) at a Au(111) electrode surface. The bilayer was formed by one of two methods: fusion of lamellar vesicles or by the combination of Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) deposition. Results indicate that phospholipid vesicles rapidly adsorb and fuse to form a film at the electrode surface. The resulting film undergoes a very slow structural transformation until a characteristic corrugated phase is formed. Force-distance curve measurements reveal that the thickness of the corrugated phase is consistent with the thickness of a bilayer lipid membrane. The formation of the corrugated phase may be explained by considering the elastic properties of the film and taking into account spontaneous curvature induced by the asymmetric environment of the bilayer, in which one side faces the gold substrate and the other side faces the solution. The effect of temperature and electrode potential on the stability of the corrugated phase has also been described.

Polarization modulation infrared reflection-absorption spectroscopy studies of the influence of perfluorinated compounds on the properties of a model biological membrane

A combination of the Langmuir-Blodgett and Langmuir-Schaefer techniques has been used to build a 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayer at a Au(111) electrode surface with hydrogen-substituted acyl chains in the top leaflet (solution side) and deuterium-substituted acyl chains in the bottom leaflet (gold side). Polarization modulation infrared reflection-absorption spectroscopy was used to determine changes in the conformation and orientation of the acyl chains of DMPC caused by the incorporation of two selected perfluorinated compounds, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), into the top leaflet of the bilayer. The incorporation of perfluorinated compounds into the DMPC bilayer caused a broadening of the methylene peaks and a shift in the methylene band positions toward higher frequencies. In addition, the tilt angle of the acyl chains decreased in comparison to the tilt angle of a pure DMPC bilayer. The reported tilt angles were smaller upon insertion of PFOS ( approximately 24 degrees ) than in the presence of PFOA ( approximately 30 degrees ). Overall, the results show that the incorporation of the perfluorinated acids has an effect on the bilayer similar to that of cholesterol by increasing the membrane fluidity and thickness due to a decrease in the tilt angle of the acyl chains.

Characterization of the interactions between fluoroquinolone antibiotics and lipids: a multitechnique approach

Probing drug/lipid interactions at the molecular level represents an important challenge in pharmaceutical research and membrane biophysics. Previous studies showed differences in accumulation and intracellular activity between two fluoroquinolones, ciprofloxacin and moxifloxacin, that may actually result from their differential susceptibility to efflux by the ciprofloxacin transporter. In view of the critical role of lipids for the drug cellular uptake and differences observed for the two closely related fluoroquinolones, we investigated the interactions of these two antibiotics with lipids, using an array of complementary techniques. Moxifloxacin induced, to a greater extent than ciprofloxacin, an erosion of the DPPC domains in the DOPC fluid phase (atomic force microscopy) and a shift of the surface pressure-area isotherms of DOPC/DPPC/fluoroquinolone monolayer toward lower area per molecule (Langmuir studies). These effects are related to a lower propensity of moxifloxacin to be released from lipid to aqueous phase (determined by phase transfer studies and conformational analysis) and a marked decrease of all-trans conformation of acyl-lipid chains of DPPC (determined by ATR-FTIR) without increase of lipid disorder and change in the tilt between the normal and the germanium surface (also determined by ATR-FTIR). All together, differences of ciprofloxacin as compared to moxifloxacin in their interactions with lipids could explain differences in their cellular accumulation and susceptibility to efflux transporters.

Electron transfer studies on cholesterol LB films assembled on thiophenol and 2-naphthalenethiol self-assembled monolayers

We have formed the cholesterol monolayer and multilayer LB films on the self-assembled monolayers of 2-naphthalenethiol (2-NT) and thiophenol (TP) and studied the electrochemical barrier properties of these composite films using cyclic voltammetry and electrochemical impedance spectroscopy. We have also characterized the cholesterol monolayer film using grazing angle FTIR, scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Cholesterol has a long hydrophobic steroid chain, which makes it a suitable candidate to assemble on the hydrophobic surfaces. We find that the highly hydrophobic surface formed by the self-assembled monolayers (SAM) of 2-NT and TP act as effective platforms for the fabrication of cholesterol monolayer and multilayer films. The STM studies show that the cholesterol monolayer films on 2-NT form striped patterns with a separation of 1.0 nm between them. The area per cholesterol molecule is observed to be 0.64 nm2 with a tilt angle of about 28.96 degrees from the surface normal. The electrochemical studies show a large increase in charge transfer resistance and lowering of interfacial capacitance due to the formation of the LB film of cholesterol. We have compared the behavior of this system with that of cholesterol monolayer and multilayers formed on the self-assembled monolayer of thiophenol.

Biophysical effects of electric fields on membrane water interfaces: a mini review

Lipid-water interfaces are dielectric transition regions. Their local organizations are highly sophisticated. They are sensitive to electric field with dramatic consequences on the global membrane organization and function. The importance of using local values of parameters (e.g. dielectric constant) near water-solution interface due to hydration and different electrostatic effects is often neglected in the description of cellular functions. Structural changes in the lipid layer are induced by minute changes in the electric properties of the interface. They bring alterations in the structure and oligomerization of membrane proteins.

Tilt angle of lipid acyl chains in unilamellar vesicles determined by ellipsometric light scattering

Ellipsometric light scattering (ELS) at room temperature is applied to unilamellar vesicles (approximately 50 nm radius) of 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) in the gel phase and of 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) in the liquid-crystaline phase. A high sensitivity of this technique to the local anisotropy is found. From the resulting local birefringence, a lower limit of (29 +/-0.5) degrees for the average tilt angle of the lipid chains of DPPC with respect to the membrane normal is estimated. This tilt angle value is slightly lower than literature values for the tilt angle in oriented lipid multi-bilayers on solid substrates.

Tethered bilayer lipid membranes studied by simultaneous attenuated total reflectance infrared spectroscopy and electrochemical impedance spectroscopy

The formation of tethered lipid bilayer membranes (tBLMs) from unilamelar vesicles of egg yolk phosphatidylcholine (EggPC) on mixed self-assembled monolayers (SAMs) from varying ratios of 6-mercaptohexanol and EO(3)Cholesteryl on gold has been monitored by simultaneous attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and electrochemical impedance spectroscopy (EIS). The influence of the lipid orientation (and hence the anisotropy) of lipids on a gold film on the dichroic ratio was studied by simulations of spectra with a matrix method for anisotropic layers. It is shown that for certain tilt angles of the dielectric tensor of the adsorbed anisotropic layer dispersive and negative absorption bands are possible. The experimental data indicate that the structure of the assemblies obtained varies with varying SAM composition. On SAMs with a high content of EO(3)Cholesteryl, tBLMs with reduced fluidity are formed. For SAMs with a high content of 6-mercaptohexanol, the results are consistent with the adsorption of flattened vesicles, and spherical vesicles have been found in a small range of surface compositions. The kinetics of the adsorption process is consistent with the assumption of spherical vesicles as long-living intermediates for surfaces of a high 6-mercaptohexanol content. No long-living spherical vesicles have been detected for surfaces with a large fraction of EO(3)Cholesteryl tethers. The observed differences between the surfaces suggest that for the formation of tBLMs (unlike supported BLMs) no critical surface coverage of vesicles is needed prior to lipid bilayer formation.

Electrochemical and PM-IRRAS Studies of the Effect of Cholesterol on the Properties of the Headgroup Region of a DMPC Bilayer Supported at a Au(111) Electrode

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was employed to investigate the interaction of cholesterol with the headgroups of dimyristoylphosphatidycholine (DMPC) molecules under a static electric field. DMPC/cholesterol (7:3 molar ratio) mixtures form a bilayer on a Au(111) electrode surface by fusion and spreading of small unilamellar vesicles. PM-IRRAS experiments provided detailed information concerning the conformation and hydration of headgroups of DMPC bilayers in the presence and absence of 30% cholesterol. The presence of 30% cholesterol increases the space between the headgroups of DMPC molecules and hence increases the hydration of the DMPC/cholesterol mixed bilayer. The conformational state of the headgroups of DMPC molecules in the mixed bilayer is also significantly changed. The phosphate group is closer to the surface compared with the pure DMPC bilayer. The conformation of the -O-C-C-N moiety changes from gauche to trans in the presence of cholesterol.