Histomorphometric evaluation of six dental implant surfaces after early loading in augmented human sinuses

Osteoconductivity of Porous Titanium Structure on Implants in Osteoporosis

In compromised bone conditions such as osteoporosis, developments of the implant surface are necessary to secure the stability of implants. This study investigated the effect of the surface porous titanium structure (PS) on the osseointegration of implants in osteoporotic bone. Bilateral ovariectomy (OVX) was performed in 4 female beagle dogs to induce osteoporosis for 32 wk. Success of induction was based on the evaluation of bone mineral density by Hounsfield units (HU) in computed tomography images. Posterior teeth in both mandibles were extracted 1 wk after OVX, and a total of 30 implants (15 implants in each group) were placed after 32 wk of osteoporosis induction. The control group implant underwent resorbable blast media (RBM) surface treatment, whereas the test group underwent RBM surface treatment in the coronal two-thirds and a PS added to the apical 3-mm portion. HU values in the mandibular trabecular bone, lumbar, and femoral head significantly decreased 32 wk after OVX, confirming osteoporotic condition after induction. Resonance frequency analysis and removal torque test showed comparable values between the 2 groups at 4 wk after implant placement. The surface topography of the implant after removal showed hard tissue integration at the PS in the test group. Bone-to-implant contact length was greater in the apical portion of the test group, although statistical significance was not found between the groups. Interthread bone area in the apical portion of the test group showed a significant increase compared to the control group (control: 0.059 ± 0.041 mm², test: 0.121 ± 0.060 mm², P = 0.028) with the histological feature of bone ingrowth at the PS. The findings of the study demonstrated that the surface PS could improve osteoconductivity in the osteoporotic trabecular bone by bone ingrowth at the pore space, thereby enhancing the osseointegration and stability of the implants.

Porous Tantalum VS. Titanium Implants: Enhanced Mineralized Matrix Formation after Stem Cells Proliferation and Differentiation

Titanium dental implants are used routinely, with surgical procedure, to replace missing teeth. Even though they lead to satisfactory results, novel developments with implant materials can still improve implant treatment outcomes. The aim of this study was to investigate the efficiency of porous tantalum (Ta) dental implants for osseointegration, in comparison to classical titanium (Ti). Mesenchymal stem cells from the dental pulp (DPSC) were incubated on Ta, smooth titanium (STi), and rough titanium (RTi) to assess their adhesion, proliferation, osteodifferentiation, and mineralized matrix production. Cell proliferation was measured at 4 h, 24 h, 48 h with MTT test. Early osteogenic differentiation was followed after 4, 8, 12 days by alkaline phosphatase (ALP) quantification. Cells organization and matrix microstructure were studied with scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Collagen production and matrix mineralization were evaluated by immunostaining and histological staining. MTT test showed significantly higher proliferation of DPSC on Ta at 24 h and 48 h. However, APL quantification after 8 and 12 days was significantly lower for Ta, revealing a delayed differentiation, where cells were proliferating the more. After 3 weeks, collagen immunostaining showed an efficient production of collagen on all samples. However, Red Alizarin staining clearly revealed a higher calcification on Ta. The overall results tend to demonstrate that DPSC differentiation is delayed on Ta surface, due to a longer proliferation period until cells cover the 3D porous Ta structure. However, after 3 weeks, a more abundant mineralized matrix is produced on and inside Ta implants. Cell populations on porous Ta proliferate greater and faster, leading to the production of more calcium phosphate deposits than cells on roughened and smooth titanium surfaces, revealing a potential enhanced capacity for osseointegration.

An In Vivo Study in Rat Femurs of Bioactive Silicate Coatings on Titanium Dental Implants

Silica-based ceramics have been proposed for coating purposes to enhance dental and orthopedic titanium (Ti) implant bioactivity. The aim of this study was to investigate the influence of sphene-based bioceramic (CaO.TiO₂.SiO₂) coatings on implant osseointegration in vivo. Sphene coatings were obtained from preceramic polymers and nano-sized active precursors and deposited by an automatic airbrush. Twenty customized Ti implants, ten sphene-coated and ten uncoated rough implants were implanted into the proximal femurs of ten Sprague-Dawley rats. Overall, cortical and cancellous bone-to-implant contact (BIC) were determined using micro-computed tomography (micro-CT) at 14 and 28 days. Moreover, peri-implant bone healing was histologically and histomorphometrically evaluated. The white blood cell count in the synovial fluid of the knee joints, if present, was also assessed. No difference in the BIC values was observed between the sphene-coated and uncoated implants, overall and in the two bone compartments (p > 0.05). Delamination of the coating occurred in three cases. Consistently with micro-CT data, the histological evaluation revealed no differences between the two groups. In addition, no synovial fluid could be collected on the test side, thus confirming sphene biocompatibility. In conclusion, sphene coating was found to be a suitable material for biomedical applications. Further studies are needed to improve coating adhesion to the implants.

Comparison of the Effects of Er, Cr: YSGG Laser and Super-Saturated Citric Acid on the Debridement of Contaminated Implant Surfaces

Introduction: Several techniques such as using citric acid, plastic curettes, ultrasonic devices, and lasers have been suggested for debridement of contaminated implant surfaces. This comparative investigation aimed to assess and compare the effects of Er, Cr: YSGG laser and super-saturated citric acid on the debridement of contaminated dental implant surfaces. Methods: In this in-vitro study, 12 contaminated failed implants were collected and randomly divided into 2 groups (6 in group A, and 6 in group B). Also, one implant was considered as the control. The implants were horizontally sectioned into coronal and apical portions and subsequently irradiated by Er, Cr: YSGG laser in coronal and citric acid in apical in group A and the opposite in group B. In order to evaluate the effect of water spray on the laser section, half the laser portion of the implants was irradiated using water, while the other half was irradiated without water with an irradiation time of 1 minute. Results: Results revealed that calculus and plaque removal was greater in the laser part of both groups (with and without water) compared to citric acid parts and the correlation between calculus removal and surface roughness were statistically significant. Furthermore, the surface roughness in the citric acid parts was significantly higher than in laser parts. Water spray during irradiation had a very small influence on understudy factors. Conclusion: Based on the results of this study, the Er, Cr: YSGG laser was more effective in calculus removal and caused less surface roughness compared with citric acid application.

Maxillary Sinus Floor Augmentation With Synthetic Bone Substitutes Compared With Other Grafting Materials: A Systematic Review and Meta-analysis

OBJECTIVE

To test the hypotheses of no differences in implant treatment outcome after maxillary sinus floor augmentation (MSFA) with synthetic bone substitutes (SBS) compared with other grafting materials applying the lateral window technique.

MATERIALS AND METHODS

A MEDLINE/PubMed, Embase and Cochrane Library search in combination with hand-search of selected journals was conducted.

RESULTS

Five randomized controlled trials with low risk of bias fulfilled the inclusion criteria. SBS disclosed high survival rate of suprastructures and implants with no significant differences compared to autogenous bone graft or xenograft. Meta-analysis revealed a patient-based implant survival rate of 0.98 (confidence interval: 0.89-1.08), indicating no differences between SBS and xenograft. SBS demonstrated significant less newly formed bone compared with autogenous bone graft, whereas no significant difference was revealed as compared to xenograft. High implant stability values, limited periimplant marginal bone loss, and few complications were reported with SBS.

CONCLUSIONS

There seem to be no differences in implant treatment outcome after MSFA with SBS compared to other grafting materials.

Bone response to physical-vapour-deposited titanium dioxide coatings on titanium implants

OBJECTIVES

The aim of this study was to investigate the correlation between coating thickness and the crystal structure of physical-vapour-deposited (PVD) titanium dioxide coatings, and to evaluate their in vivo biocompatibility.

MATERIALS AND METHODS

The PVD TiO 2 coatings of different thickness were deposited on machined titanium grade 2 screw-shaped implants. Non-coated titanium implants were used as controls. Coating properties such as thickness, crystal structure, coating morphology and roughness were characterized. Forty-eight implants were placed randomly into both tibias of 16 rats. The animals were euthanized 7 and 28 days postsurgery and block biopsies were prepared for histology, histomorphometry and SEM analysis.

RESULTS

The thicknesses of the PVDTiO 2 coatings were 120 and 1430 nm respectively. Histologically, new bone formed on all implant surfaces. The mean percentage of newly formed bone in contact with the implant (BIC) was significantly higher at early healing time (7 days) for the 120 nm thick PVD coating (39 ± 14%) than for both the 1430 nm thick PVD coating (22 ± 10%) (P = 0.043) and the machined surface (22 ± 9%) (P = 0.028). This difference was no longer evident after 28 days (P = 0.867).

CONCLUSION

Bone formation and bone-to-implant contact are achieved to the same degree for TiO 2 surface modifications prepared by a PVD process as clinically used, machined titanium. Furthermore, a relatively thinner PVD coating promotes a higher degree of bone apposition shortly after implantation, thereby providing rationales for exploring the potential clinical use of these modifications.