Postoperative evaluation of grafted bone in alveolar cleft using three-dimensional computed tomography data

Assessment and Identification of Improvement Areas for Facial Symmetry in Hemifacial Microsomia (Type IIB) Using Three-dimensional Measurements

Background

Surgical planning for hemifacial microsomia (HFM) patients often involves planning the amount of maxillary movement and mandibular bone distraction from three-dimensional (3D) volumetric images constructed from computed tomography scans. By representing anatomical indicators for facial symmetry in X, Y, and Z coordinates, we identified the more challenging areas in correcting facial asymmetry.

Methods

The study included five HFM patients with a mean age of 22.2 years, all diagnosed with HFM (type IIB). We established measurement points with high reproducible 3D coordinates on the 3D volumetric images obtained from computed tomography scans for before surgery, treatment objectives, and after surgery. We assessed the symmetry of measurement points between the affected side and nonaffected side at each time point.

Results

In the before-surgery group, significant differences were observed between the affected side and nonaffected side in X,Y (excluding Palatine foramen, upper molar, canine) and Z coordinates for measurement items. In the treatment objectives group, no differences were observed between the affected side and nonaffected side in X, Y, and Z coordinates, resulting in facial symmetry. In the after-surgery group, significant differences were observed in Y coordinates in the mental foramen area, and significant differences were observed in z axis measurement items in the canine and mental foramen areas.

Conclusions

It is evident that relying solely on a front view assessment is insufficient to achieve facial symmetry. Particularly, both anterior-posterior and vertical improvements in the area near the mental foramen on the affected side are necessary.

Novel Technique for Median Cleft Lip Comprising the Simultaneous Formation of the Columella, Philtrum, and Cupid's Bow

Numerous surgical techniques for median cleft lip repair have been described; however, most cause excessively sharp peaks or the collapse of Cupid's bow. We report a technique for median cleft lip repair using a mucosal skin flap and full-thickness skin graft and 15 years of follow-up. Our technique provides acceptable formation of the columella, philtrum, and the two peaks of Cupid's bow. In this paper, we cite our previously reported techniques and add new findings and discussion based on the long-term postoperative outcomes of this procedure. Advantages and disadvantages of this technique are discussed, and a possible solution to achieve a more satisfactory result is suggested. Advantages and disadvantages of this new technique are discussed, and a possible solution to achieve a more satisfactory result is suggested.

Differences in Practice in Alveolar Bone Grafting Among American Cleft Palate-Craniofacial Association Members

The purpose of this study is to determine areas of agreement and disagreement among American Cleft Palate-Craniofacial Association (ACPA)members in the clinical practice of alveolar bone grafting (ABG), to guide further research to optimize ABG practices.

A cross-sectional survey was conducted.

The respondents were in an academic, combination, or private practice.

The respondents were either plastic or oral and maxillofacial surgeons (OMFS) from various countries.

A de-identified 24-question online survey was distributed to ACPA surgeon members utilizing the Research Electronic Data Capture (REDCap) tool.

Data collected included surgeon specialty, use of various alveolar bone graft surgical techniques, as well as protocols.

There was more variability than consensus between specialties with regards to the preoperative workup, timing of surgery, materials used for bone graft, surgical techniques, perioperative management, and postoperative evaluation. There was consensus on grafting during mixed dentition, not staging soft and hard tissue closure, and using iliac crest for primary and secondary grafting. Disagreements involved factors used to time the procedure and type of imaging used to assess viability. Technical differences involved incision type, part of bone grafted, use of minimally invasive technique, and material used for revisions.

Aside from areas of consensus among surgeons on ABG, several areas, including use of bone substitutes in revision grafting, incision and type of iliac crest graft used during initial grafting, and postoperative protocols, had no consensus. These areas should be targets of further research to determine if there truly is an optimal method to perform ABG.

The study was approved by the University of Illinois at Chicago Institutional Review Board. A de-identified 24-question online survey was distributed to surgeon members of the ACPA utilizing the REDCap tool on August 7, 2020. The survey questions consisted of multiple choice and multiple selection questions including an option to select "other" and specify the information in a blank space. Data collected included surgeon specialty, use of various alveolar bone graft surgical techniques, as well as pre and postoperative protocols. The full survey is included in online Supplemental material. Data analysis was performed in SPSS Statistics 27 (IBM Corp.). Descriptive statistics were performed, and chi-square was used to test for significant differences in survey responses between groups.

Postoperative evaluation of bone bridge after alveolar bone graft with cortical bone lining technique

OBJECTIVE

For alveolar bone grafting (ABG), we have been performing surgery using a technique in which a cortical bone lining iliac endplate is applied to the anterior nasal aperture inferior margin. Herein, we used conventional and cortical bone lining techniques to examine the postoperative bone-bridge morphology after ABG.

STUDY DESIGN

Fifty-five unilateral patients who underwent ABG at our clinic from October 2012 to March 2019 were included. We used postoperative CT data to compare the labiolingual width of the grafted bone and anterior-posterior and vertical shapes of the nasal aperture inferior margin with respect to the ungrafted side.

RESULTS

The cortical bone lining technique was superior to the conventional method. The cortical bone lining technique showed good results regardless of alveolar cleft width or oral-nasal fistula. Also, tooth movement into the grafted area was involved in maintaining the residual graft bone; however, the cortical bone lining technique had better results.

CONCLUSIONS

The cortical bone lining technique allows for the physical closure of nasolateral mucosal fistulas when it is technically difficult, and it can apply sufficient pressure to the bone marrow cancellous bone filling over the cortical plate bone. Our results illustrate the effectiveness of the cortical bone lining technique.

Comparison of Preoperative Measurement Methods of Alveolar Cleft Volume Using Cone Beam Computed Tomography between Computer Simulation and Water Displacement Methods

OBJECTIVE

To compare the use of a computer simulation by Mimics software and the water displacement method as means for measurement of alveolar cleft volume on cone beam computed tomography (CBCT) data.

DESIGN

Prospective study.

SETTLING

Institutional research.

PATIENTS

Patients with unilateral complete cleft lip and palate (UCCLP) who would undergo alveolar bone grafting.

INTERVENTIONS

CBCT images of twenty patients with UCCLP were included in the study. In the first method, the water displacement method was adopted to measure volume of plasticine filled in the alveolar cleft imprinted on 3D printed model of maxilla. In the second method a volumetric assessment function in Mimics software was adopted to measure volume of 3D virtual model of alveolar cleft constructed from CBCT images. A comparison on the alveolar cleft volumes derived from the two methods was assessed using the statistical paired t-test.

MAIN OUTCOME MEASURE

The paired-t test showed no statistically significant difference between alveolar cleft volumes measured by the two methods (P = 0.075).

RESULTS

Mean volume of the alveolar cleft measured by the water displacement method was 1.03 ± 0.31 ml whereas by the computer simulation using Mimics software the value was 1.00 ± 0.31 ml. The mean difference between the two methods was 0.03 ± 0.08 ml.

CONCLUSION

The computer simulation by Mimics software as a means for measurement of alveolar cleft volume on CBCT data is as accurate as the measurement by the water displacement method.

Mechanical Tension-Stress in Alveolar Cleft Repaired With Autogenous Bone in Canine Models

OBJECTIVE

Cleft lip and/or palate is a common birth defect worldwide, always accompanied by alveolar cleft. However, the success rate of secondary alveolar bone grafting is unsatisfactory. Rapid maxillary expansion (RME) often used after bone transplantation provides functional stimulation for bone graft area. This study aimed to investigate the effect of RME force on the bone graft area and midpalatal suture, and screen out the most suitable loaded force and loaded teeth, so as to provide a reference for clinical treatment.

METHODS

Fourteen 24-week-old male beagles were assigned randomly to 3 groups: blank control, autogenous, and autogenous with RME. Three-dimensional finite element analysis was conducted to evaluate the distribution and value of the stress in the model. The maxillae were collected and subjected to radiography and helical computed tomography to evaluate new bone formation in the graft area. Van Gieson's Picrofuchsin staining was performed for histomorphological observation.

RESULTS

After 8 weeks of RME treatment, new bone formation of the dogs was markedly accelerated, and bone resorption was significantly reduced compared with the untreated dogs or those only treated with autogenous iliac bone. The treatment with RME evidently made the bone trabecula more abundant and the area of bone formation larger. Three-dimensional finite element analysis showed that the clinical effect can be achieved by using canine teeth as the loaded teeth and applying force of 10 MPa.

CONCLUSION

Rapid maxillary expansion after bone grafting had a positive effect on osteogenesis in a canine model of alveolar cleft.

Comparison of 2- and 3-dimensional radiologic evaluation of secondary alveolar bone grafting of clefts: a systematic review

OBJECTIVE

Secondary alveolar bone grafting (SABG) has become the principal means of treating alveolar cleft defects. We reviewed the literature on 2-dimensional (2-D) and 3-dimensional (3-D) radiographic evaluation of SABG in patients with cleft lip and alveolus (CLA) and those with cleft lip and palate (CLP), with a focus on outcomes.

STUDY DESIGN

We searched several electronic databases to the end of 2018. The inclusion criteria were nonsyndromic CLA or CLP treated with SABG at an optimal age and evaluation performed no earlier than 3 months postoperatively. Study quality was evaluated by using the Methodological Index for Non-Randomized Studies and the Cochrane Collaboration tool.

RESULTS

We identified 282 articles from 3 databases. Full texts of 102 articles were analyzed, and finally 11 articles were included for qualitative analysis. 2-D and 3-D radiographic evaluations were performed in each study. Traditional 2-D radiographic imaging tended to overestimate success; bone resorption in the labiopalatal direction was inaccurate in 2-D views. Most articles were observational in nature and of moderate methodologic quality.

CONCLUSIONS

2-D evaluation tended to overestimate SABG outcomes; 3-D evaluation was more precise and reliable than 2-D radiography. A gold standard 3-D evaluation protocol is required for quantitative comparisons in the future.

Current methods for secondary alveolar bone grafting assessment in cleft lip and palate patients - A systematic review

INTRODUCTION

The development of 3D X-ray diagnostics has led to new methods for secondary alveolar bone grafting (SABG) assessment. The aim of this study was to collect and present literature from the years 2007-2018, and review on the current treatment outcome assessment methods for SABG.

MATERIALS AND METHODS

A systematic review of literature from 2007 to 2018 was carried out, following PRISMA guidelines. 426 records were identified after duplicate references had been removed. 25 articles were included in the review. The Cochrane Collaboration tool or the methodological index for non-randomized studies was used for quality evaluation.

RESULTS

Computed tomography and cone beam computed tomography were preferentially used for SABG treatment outcome verification. There were different assessment protocols. Due to the ways in which results were presented, methods were divided into five groups: linear measurements, volumetric measurements, density measurements, percentage ratios, and scales. There was only one randomized, controlled trial with high methodological quality.

CONCLUSIONS

1. Currently, 3D X-ray imaging is a standard treatment outcome verification method for SABG. 2. It is necessary to establish the required postoperative follow-up time for best SABG treatment outcome assessment. More prospective studies to assess bone graft outcomes after 6 months and 1 year are required.

Three-dimensional radiological evaluation of secondary alveolar bone grafting in cleft lip and palate patients: a systematic review

OBJECTIVES

To systematically review the existing literature on the three-dimensional (3D) radiological evaluation of secondary alveolar bone grafting (SABG) in cleft lip and palate (CLP) patients, with specific interest in 3D imaging protocols and assessment methods.

METHODS

A comprehensive literature search on PubMed, Embase and the Cochrane Library was conducted. Included publications concerned 3D imaging for evaluation of SABG in CLP patients while articles about primary or tertiary bone grafting or using of two-dimensional images only were excluded. Study quality was evaluated using the Methodological Index for Non-Randomized Studies  or the Cochrane Collaboration tool for assessing risk of bias.

RESULTS

The search yielded 1735 citations, of which 38 met the inclusion criteria. We noticed a large variability in imaging protocols and bone graft evaluation methods between studies. Most articles were observational studies with medium to low methodological quality, except for the one randomised clinical trial having a low risk of bias.

CONCLUSIONS

There is a lack of prospective, controlled trials based on a consistent imaging protocol with a sufficiently long follow-up period. A pressing need exists for the development of a consistent optimized imaging protocol for diagnosis and follow up of SABG in CLP patients. Although 3D evaluation methods seem to be more precise than two-dimensional methods, we should be careful when comparing the outcomes arising from different 3D measuring techniques.

Growth of Palate in Unilateral Cleft Lip and Palate Patients Undergoing Two-stage Palatoplasty and Orthodontic Treatment

The purpose of this study was to investigate the long-term effects of two-stage palatoplasty on the morphology of the maxillary alveolar arch and occlusion using plaster models of the maxilla and mandible obtained from patients with unilateral complete cleft lip and palate who also underwent orthodontic treatment. A total of 20 patients undergoing two-stage palatoplasty by Perko's method (Group T) were enrolled. Plaster models of the maxilla and mandible were obtained from each patient at Time 1, on commencement of orthodontic treatment in the mixed dentition period; at Time 2, on that of orthodontic treatment in the permanent dentition period; and at Time 3, on completion of active orthodontic treatment. Analysis of occlusion and morphological analysis were performed using a 3-dimensional measuring system. The results were compared with 15 patients who underwent one-stage palatoplasty by the push-back method using a mucoperiosteal flap (Group P). Alveolar morphology and the relationship between the maxilla and mandible were satisfactory in Group T. The palates in Group T were deeper and larger than those in Group P. Alveolar collapse in Group T was milder, and impairment of the alveolar morphology less notable than in Group P, as surgical invasion to the anterior alveolar region was avoided during the palatal growth period. These results suggest that two-stage palatoplasty is advantageous for jaw development.

Fetal dental panorama on three-dimensional ultrasound imaging of cleft lip and palate and other facial anomalies

OBJECTIVES

Craniofacial deformities have a high psychosocial impact. The aim of this paper is to improve obstetric ultrasonography and prenatal detection of facial anomalies by providing a new fetal dental panorama.

MATERIAL AND METHODS

The present study describes a new modality to visualize the fetal tooth germs and an easy step-by-step diagnostic approach. Image acquisition was performed between 23 and 32 weeks of gestation using a Voluson E10 GE ultrasound machine with an RM6C transducer (GE Medical Systems, Zipf, Austria). Reconstruction was performed using Omniview from the axial image. Volume contrast imaging (VCI) was used with a thickness of 20 mm, and a render mode that combined "Rx mode" and "surface texture."

RESULTS

The resulting imaging allows a more precise visualization of the fetal dental arch and can be obtained between 14 and 28 weeks of gestation. The presence of dental anomalies can be a clue for the diagnosis of various congenital defects, in particular conditions with a shortage of other physical abnormalities, such as ectodermal dysplasia and Binder syndrome.

CONCLUSIONS

The creation of a precise fetal dental panorama allows an improved detection of facial deformities.

CLINICAL RELEVANCE

With the current paper, we want to increase prenatal diagnostics facial anomalies, and help to establish a tailored multidisciplinary treatment plan. This paper should be of interest to readers who are currently treating patients with craniofacial malformations and readers who are performing diagnostic prenatal sonography.

Secondary closure of alveolar cleft with resorbable collagen membrane and a combination of intraoral autogenous bone graft and deproteinized anorganic bovine bone

OBJECTS

Secondary alveolar bone grafting is a method that enables an excellent oral rehabilitation of the patients having alveolar cleft. The aim of this work is to report the closure of the alveolar cleft with the use of harvested autogenous bone graft combined with deproteinized anorganic bovine bone (Bio-Oss) under local anesthesia.

SETTINGS AND SAMPLE POPULATION

Nine patients with age range, 8-11 years were consulted for their unilateral alveolar cleft.

MATERIALS AND METHODS

A combination of symphyseal bone and deproteinized bovine bone mineral (DBBM) was placed into the alveolar cleft defect. Clinical and radiographical assessments were performed at 1, 3, and 6 months postoperatively.

RESULTS

The healing period was uneventful in all cases, and no complications, such as membrane exposure, infection, or harvest site morbidity, were observed. All treated defect sites exhibited excellent bone formation, with an average of 5.45 mm (range, 2-9 mm; standard deviation 1.93 mm) of augmentation achieved overall.

CONCLUSION

The treatment of vertically deficient alveolar ridges with guided bone regeneration using a mixture of autogenous bone and DBBM and resorbable collagen membrane can be considered successful, using this technique in an out-patient office setting.

Risk factor analysis of bone resorption following secondary alveolar bone grafting using three-dimensional computed tomography

BACKGROUND/AIM

The purpose of this study is to analyze the risk factors for bone resorption following secondary bone grafting in the alveolar cleft, using three-dimensional (3D) computed tomography (CT) based on surgical simulation software (SimPlant OMS, Materialise Dental, Leuven, Belgium).

METHODS

We reviewed the secondary alveolar bone grafts performed by a single surgeon between January 2005 and January 2014. A total of 40 patients with unilateral alveolar cleft were included in this study. The grafted alveolar bone was measured using surgical simulation software. In order to validate the measurement, each data set was measured by three different analysts and the inter- and intraobserver variabilities were calculated. A total of eight risk factors for grafted bone survival, including patient age, sex, body mass index (BMI), palatal fistula, amount of grafted bone, dental appliance, canine or incisor eruption, and preoperative upper respiratory tract infection, were evaluated using the linear mixed model and Mann-Whitney test.

RESULTS

The average alveolar defect size was 4.98 cc and the average graft survival was 67.5%. The inter- and intraobserver variabilities of simulation software were 0.758 and 0.915, respectively. Among the risk factors, only dental appliance (p = 0.02) and canine eruption (p = 0.041) were significantly correlated with graft survival. Other risk factors, including the amount of grafted bone, did not show a significant relationship with graft survival.

CONCLUSION

Measurement of an alveolar bone defect using a simulation program based on 3D CT is reliable and reproducible. Secondary bone grafting survival was significantly correlated with canine eruption and dental appliance in the alveolar cleft.

Three-dimensional imaging methods for quantitative analysis of facial soft tissues and skeletal morphology in patients with orofacial clefts: a systematic review

Background

Current guidelines for evaluating cleft palate treatments are mostly based on two-dimensional (2D) evaluation, but three-dimensional (3D) imaging methods to assess treatment outcome are steadily rising.

Objective

To identify 3D imaging methods for quantitative assessment of soft tissue and skeletal morphology in patients with cleft lip and palate.

Data sources

Literature was searched using PubMed (1948–2012), EMBASE (1980–2012), Scopus (2004–2012), Web of Science (1945–2012), and the Cochrane Library. The last search was performed September 30, 2012. Reference lists were hand searched for potentially eligible studies. There was no language restriction.

Study selection

We included publications using 3D imaging techniques to assess facial soft tissue or skeletal morphology in patients older than 5 years with a cleft lip with/or without cleft palate. We reviewed studies involving the facial region when at least 10 subjects in the sample size had at least one cleft type. Only primary publications were included.

Data extraction

Independent extraction of data and quality assessments were performed by two observers.

Results

Five hundred full text publications were retrieved, 144 met the inclusion criteria, with 63 high quality studies. There were differences in study designs, topics studied, patient characteristics, and success measurements; therefore, only a systematic review could be conducted. Main 3D-techniques that are used in cleft lip and palate patients are CT, CBCT, MRI, stereophotogrammetry, and laser surface scanning. These techniques are mainly used for soft tissue analysis, evaluation of bone grafting, and changes in the craniofacial skeleton. Digital dental casts are used to evaluate treatment and changes over time.

Conclusion

Available evidence implies that 3D imaging methods can be used for documentation of CLP patients. No data are available yet showing that 3D methods are more informative than conventional 2D methods. Further research is warranted to elucidate it.

Systematic review registration

International Prospective Register of Systematic Reviews, PROSPERO CRD42012002041