Radiographic definition of pelvic osteolysis following total hip arthroplasty

New comprehensive score for predicting difficulties in revision total hip arthroplasty

BACKGROUND

Revision total hip arthroplasty (THA) can be complex, and assessing possible difficulties is important to predict the operative time. No simple score for predicting difficulties has been assessed prospectively. We therefore developed an original score for the pre-operative evaluation of extraction and reconstruction difficulties. The objectives of this prospective study were to (1) assess correlations between score values and operative time, (2) determine whether the score predicted the need for revision implants and/or filling material, (3) determine whether the score predicted intra-operative and post-operative complications, and (4) evaluate the inter-observer and intra-observer reproducibility of the score.

HYPOTHESIS

The score is reproducible and correlates well with the operative time, thereby allowing prediction of this parameter before surgery.

MATERIAL AND METHODS

A prospective study of 103 revision THA procedures performed between March 2018 and August 2023 was conducted. The primary outcome was operative time and the secondary outcomes were use of a revision implant, use of filling material, and intra-operative and post-operative complications. The score was determined by four observers to allow evaluation of inter-observer agreement. Intra-observer agreement was assessed by having one of the observers determine the score a second time after inclusion of the last patient. The score has a maximum value of 20 and allows classification of the procedure as very difficult, difficult, and moderately difficult.

RESULTS

Mean operative time correlated with the score value: 136.0 ± 33.9 min in the very difficult group, 102.0 ± 34.8 min in the difficult group, and 75.4 ± 65.5 min in the moderately difficult group (p = 0.0002). The score predicted the use of a reinforcement ring (40 procedures: 12/17 [70%], 11/25 [44%], and 17/61 [28%] in the very difficult, difficult, and moderately difficult groups, respectively; p = 0.01) and of a long stem (20 procedures: 8/17 [47%], 7/25 [28%], and 5/61 [8%] patients in the very difficult, difficult, and moderately difficult groups, respectively; p < 0.001). The score did not predict the use of filling material (42 procedures: 10/17 [59%], 9/25 [36%], and 23/61 [37%] in the very difficult, difficult, and moderately difficult groups, respectively; p = 0.250). The score predicted both intra-operative complications (5/17 [29%], 4/25 [16%], and 4/61 [6%] procedures in the very difficult, difficult, and moderately difficult groups, respectively; p = 0.028) and post-operative complications (4/17 [23%], 0/25 [0%], and 6/61 [9%] in the very difficult, difficult, and moderately difficult groups, respectively; p = 0.15). Inter-observer agreement was strong according to Landis-Koch criteria, with kappa values ranging from 0.70 to 0.79 [0.57-0.90]. The kappa value for intra-observer agreement was 0.74 [0.63-0.85].

DISCUSSION

This score predicts surgical difficulties by adding criteria to bone destruction, in contrast to widely used classifications for revision THA. Moreover, the score is reproducible and predicts the operative time, thus potentially playing an important role during pre-operative planning.

LEVEL OF EVIDENCE

IV; prospective observational non-comparative study.

Osteolysis Following the Use of Polyetheretherketone Suture Anchors in Hand and Wrist Surgery: A Preliminary Study

PURPOSE

The objective of this study was to investigate and describe the presence of osteolysis after implantation of polyetheretherketone (PEEK) suture anchors in the hand and wrist.

METHODS

Patients who underwent hand or wrist surgery using PEEK suture anchor(s) at a large academic institution from January 2019 to January 2021 were identified. Patients without accessible intraoperative fluoroscopic imaging were excluded. Patient demographics, type of procedure, and suture anchor material were recorded. The suture anchor tunnel size was measured on sequential radiographs and recorded as percentage change. Descriptive statistics were used to summarize findings.

RESULTS

A total of 26 PEEK suture anchors in 14 patients were included, with an average follow-up of 12.0 months (range, 1.5-24.1 months). Twenty-seven percent of the anchors (7/26) demonstrated osteolysis at final follow-up, as defined by enlargement of tunnel size by >30%. In all anchors, the tunnel size increased by 19.1% on average (range, -7.7% to 56.1%) by final follow-up.

CONCLUSIONS

Polyetheretherketone suture anchors may be associated with the development of osteolysis in hand and wrist surgery. The clinical implications of osteolysis in the smaller bones of the hand and wrist remain unclear.

TYPE OF STUDY/LEVEL OF EVIDENCE

Prognostic IV.

Magnetic Resonance Imaging of Total Ankle Arthroplasty: State-of-The-Art Assessment of Implant-Related Pain and Dysfunction

Total ankle arthroplasty (TAA) is an effective alternative for treating patients with end-stage ankle degeneration, improving mobility, and providing pain relief. Implant survivorship is constantly improving; however, complications occur. Many causes of pain and dysfunction after total ankle arthroplasty can be diagnosed accurately with clinical examination, laboratory, radiography, and computer tomography. However, when there are no or inconclusive imaging findings, magnetic resonance imaging (MRI) is highly accurate in identifying and characterizing bone resorption, osteolysis, infection, osseous stress reactions, nondisplaced fractures, polyethylene damage, nerve injuries and neuropathies, as well as tendon and ligament tears. Multiple vendors offer effective, clinically available MRI techniques for metal artifact reduction MRI of total ankle arthroplasty. This article reviews the MRI appearances of common TAA implant systems, clinically available techniques and protocols for metal artifact reduction MRI of TAA implants, and the MRI appearances of a broad spectrum of TAA-related complications.

Outcomes of Total Ankle Arthroplasty After Periprosthetic Cyst Curettage and Bone Grafting

Total ankle arthroplasty (TAA) has become a popular management option for ankle arthritis. Periprosthetic osteolysis is one of the most common causes for reoperation in TAA. A CT scan should be done in all suspected osteolysis cases to confirm location, quantify size and aid in surgical planning. These patients are often asymptomatic with limited evidence regarding appropriate management. Smaller lesions should be monitored for progression in size. Periprosthetic cysts measuring 10-15mm in all three axes should be considered for debridment and curettage with autogenous bone grafting. The authors believe that bone grafting of large asymptomatic periprosthetic cysts could prevent implant failure.

Magnetic Resonance Imaging of Total Ankle Arthroplasty: State-of-The-Art Assessment of Implant-Related Pain and Dysfunction

Total ankle arthroplasty (TAA) is an effective alternative for treating patients with end-stage ankle degeneration, improving mobility, and providing pain relief. Implant survivorship is constantly improving; however, complications occur. Many causes of pain and dysfunction after total ankle arthroplasty can be diagnosed accurately with clinical examination, laboratory, radiography, and computer tomography. However, when there are no or inconclusive imaging findings, magnetic resonance imaging (MRI) is highly accurate in identifying and characterizing bone resorption, osteolysis, infection, osseous stress reactions, nondisplaced fractures, polyethylene damage, nerve injuries and neuropathies, as well as tendon and ligament tears. Multiple vendors offer effective, clinically available MRI techniques for metal artifact reduction MRI of total ankle arthroplasty. This article reviews the MRI appearances of common TAA implant systems, clinically available techniques and protocols for metal artifact reduction MRI of TAA implants, and the MRI appearances of a broad spectrum of TAA-related complications.

Wear rate and osteolysis in two types of second-generation annealed highly cross-linked polyethylene in total hip arthroplasty: A retrospective comparative study with a minimum of five years

BACKGROUND

As no previous study has directly compared the linear wear rate in two types of second-generation annealed highly cross-linked polyethylene, we performed a retrospective study with a minimum of 5-year follow-up to assess primary arthroplasties in the (1) wear rates and (2) incidence of osteolysis of the two types of HXLPE.

HYPOTHESIS

There was no significant difference in the linear wear rate and the incidence of osteolysis between the two types of second-generation annealed highly cross-linked polyethylene.

PATIENTS AND METHODS

In this single-center study, we reviewed 257 cases of primary cementless total hip arthroplasties between 2011 and 2015, which were performed with 32mm delta ceramic on second-generation annealed highly cross-linked polyethylene (X3 and E1 were used in 105 and 103 cases, respectively.). The mean wear rate was evaluated using a computer-assisted method, and the incidence of osteolysis was evaluated based on the appearance of a localized area with loss of trabecular bone or cortical erosion adjacent to the implants during the latest follow-up.

RESULTS

In total, we evaluated 208 cases, followed postoperatively for over 5 years (mean, 6.1 years, range: 5.0-8.0). There were no significant differences between the two groups with respect to age (list in order of Group X, Group E, p value) (61.2±12.3, 62.7±12.1, p=0.36), sex (ratio of male: 17.1%, 14.6%, p=0.61), body mass index (22.9±3.7, 22.8±4.0, p=0.91), pre- (49.9±14.8, 48.5±13.8, p=0.49) and post-operative (91.3±9.1, 92.7±7.0, p=0.23) Japanese Orthopaedic Association Hip Score, cup size (50.8±3.0, 50.9±2.2, p=0.70), cup inclination (38.7±4.8, 37.6±4.8, p=0.10), and cup anteversion (18.7±6.9, 18.5±7.6, p=0.80). The mean linear wear rates of the X3 and E1 groups were 0.057±0.039 (range: 0-0.16) and 0.054±0.037mm/year (range: 0-0.15), respectively (p=0.61). No osteolysis was found on the final plain radiographs in both groups.

DISCUSSION

This study revealed that both types of highly cross-linked polyethylene have excellent linear wear rates and were equally safe to use. However, the difference between the two materials in terms of the long-term wear rate should be further validated.

LEVEL OF EVIDENCE

III; retrospective case control study.

Uncemented total hip arthroplasty using alumina ceramic bearings at a minimum of 14 years of follow-up

INTRODUCTION

The effectiveness of modern ceramic bearings has been well established in reducing the osteolysis associated with wear of the bearing surfaces in total hip arthroplasty (THA). However, there are limited mid- to long-term follow-up data for complications associated with ceramic bearings.

MATERIALS AND METHODS

This case series analyzed 124 consecutive primary uncemented THAs in 108 patients with a mean age of 61 years using alumina ceramic-on-alumina ceramic bearing couples. Seventy THAs (56%) were evaluated at a minimum 14 years of follow-up; the mean follow-up period was 16 ± 1 years (14-20 years). Kaplan-Meier survivorship was determined with revision surgery for any reason as the end point. Complications were recorded focusing on osteolysis, ceramic fracture, and abnormal sounds until the final follow-up. Clinical data were scored according to the Merle d'Aubigne and Postel hip score at 14 years after THA.

RESULTS

The survivorship was 93.5% (95% CI 86.7-97.0%) at 14-years postoperatively. Five patients (4.0%) underwent revision surgery due to instability or infection before 1-year postoperatively. Two patients (1.6%) underwent revision surgery due to ceramic liner fracture at 9- and 12-years postoperatively, respectively. There was no radiographic evidence of osteolysis. A total of 27 complications occurred: dislocations (n = 7/124), squeaking sounds (n = 3/124), clicking sounds (n = 6/124), ceramic liner fractures (n = 2/124), periprosthetic fractures (n = 4/124), deep infections (n = 2/124), transient sciatic nerve palsy (n = 2/124), and femoral stem breakage (n = 1/124). The Merle d'Aubigne and Postel hip score was 16.8 ± 1.4 points.

CONCLUSIONS

The survivorship analysis demonstrates the uncemented THA using alumina ceramic bearings may provide favorable clinical outcome and can offer minimal wear at a minimum 14-year follow-up. Revision surgery was mostly required due to instability and infection in the short-term, and implant breakage in the mid- to long-term.

Acetabular defect management and revision arthroplasty via the direct anterior approach

OBJECTIVE

Acetabular revision arthroplasty and osseous defect management through the direct anterior approach (DAA) with or without proximal extension.

INDICATIONS

Aseptic or septic component loosening, periacetabular osseous defects, pelvic discontinuity, intrapelvic cup protrusion, anterior pseudotumors, iliopsoas tendonitis, polyethylene wear or iliopsoas abscess.

CONTRAINDICATIONS

Clinically relevant gluteal tendon lesions, active infection, morbid obesity, large abdominal pannus, ASA (American Society of Anesthesiologists) score > III, inguinal skin infection.

SURGICAL TECHNIQUE

Electrocautery dissection is recommended to dissect the Hueter interval and to debulk pericapsular scar tissue. At all times during capsular debulking, it should be made sure not to damage the iliopsoas tendon or the neurovascular bundle. A stepwise releasing sequence can facilitate dislocation of the prosthesis. Most cases can be revised via the standard DAA but certain circumstances require an intra- or extrapelvic extension. Access to the anterior gluteal surface of the ilium can be provided using a "tensor snip". More posterior access is provided by the extensile extrapelvic approach described by Smith-Petersen. The intrapelvic Levine extension offers access to the entire visceral surface of the ilium and large parts of the anterior column.

POSTOPERATIVE MANAGEMENT

Patient revised via the intra- or extrapelvic extension and patients suffering from extensive soft tissue or osseous defects should undergo postoperative weight-bearing restrictions with 20 kg for 6 weeks.

RESULTS

Based on our studies, there is no limitation on the type of acetabular implant that can be used in DAA revision arthroplasty. Moreover, virtually all types of periacetabular osseous defects can be managed through the approach and its extensions. Acetabular revision arthroplasty via the DAA and its extensions is safe and can result in good midterm results.

Reliability and validity test of a novel three-dimensional acetabular bone defect classification system aided with additive manufacturing

Background

Accurate assessment of acetabular defects and designing precise and feasible surgical plans are essential for positive outcomes of hip revision arthroplasty. Additive manufacturing (AM) is a novel technique to print physical object models. We propose a three-dimensional acetabular bone defect classification system aided with AM model, and further assess its reliability and validity under blinded conditions.

Methods

We reviewed 104 consecutive patients who underwent hip revision arthroplasty at our department between January 2014 and December 2019, of whom 45 had AM models and were included in the reliability and validity tests. Three orthopedic surgeons retrospectively evaluated the bone defects of these 45 patients with our proposed classification, made surgical plans, and repeated the process after 2 weeks. The reliability and validity of the classification results and corresponding surgical plans were assessed using the intra-class correlation coefficient or kappa correlation coefficient.

Results

The reliability and validity of the classification results were excellent. The mean initial intra-class correlation coefficient for inter-observer reliability was 0.947, which increased to 0.972 when tested a second time. The intra-observer reliability ranged from 0.958 to 0.980. Validity of the classification results also showed a high kappa correlation coefficient of 0.951–0.967. When considering corresponding surgical plans, the reliability and validity were also excellent, with intra-class correlation coefficients and kappa correlation coefficients measuring all over 0.9.

Conclusions

This three-dimensional acetabular defect classification has excellent reliability and validity. Using this classification system and AM models, accurate assessment of bone defect and reliable surgical plans could be achieved. This classification aided with AM is a promising tool for surgeons for preoperative evaluation.

CT Scan Assessment and Functional Outcome of Periprosthetic Bone Grafting After Total Ankle Arthroplasty at Medium-term Follow-up

BACKGROUND

Periprosthetic cysts can occur in up to 95% of total ankle arthroplasties (TAA) and have been correlated with implant failure. The aim of this study was to determine the clinical and radiologic outcomes, using computed tomographic (CT) scan, after periprosthetic cyst bone grafting and assess for the minimum cyst size that should be grafted.

METHODS

A retrospective review was performed of all TAA procedures performed between 2007 and 2014 (n=93). A CT scan was done to assess cyst size and operative planning. Eight patients with 9 periprosthetic cysts larger than 1.75 cm³ were grafted and specimens sent for histology. The mean time to bone grafting was 7.3 (3.8-9.5) years. Functional outcome was assessed using the American Orthopaedic Foot & Ankle Society ankle score, visual analog scale, and Self-reported Foot and Ankle Score. A CT scan was performed at follow-up to assess graft incorporation and cyst size progression. The mean time to CT scan post grafting was 3.0 (0.7-4.7) years.

RESULTS

There was no implant malalignment identified and no differences in the pre- and postoperative functional scores. Preoperatively cysts had a mean volume of 8.16 (2.04-14.03) cm³. The mean percentage incorporation was 89% (69%-100%). Eight of the grafted cysts were considered successful on CT, with the ninth having 69% incorporation. Five cysts were not grafted, as they were below 1.75 cm³, and remained the same size or had minimal enlargement.

CONCLUSION

The satisfactory results in this small cohort suggests that prophylactic bone grafting may extend implant survival. We recommend that periprosthetic cysts greater than 1.75 cm³ be prophylactically bone grafted, and that cysts smaller than 1.75 cm³ be monitored for progression in size.

LEVEL OF EVIDENCE

Level IV, Case Series.

Pathogenesis, Evaluation, and Management of Osteolysis Following Total Ankle Arthroplasty

Periprosthetic osteolysis is a common occurrence after total ankle arthroplasty (TAA) and poses many challenges for the foot and ankle surgeon. Osteolysis may be asymptomatic and remain benign, or it may lead to component instability and require revision or arthrodesis. In this article, we present a current and comprehensive review of osteolysis in TAA with illustrative cases. We examine the basic science principles behind the etiology of osteolysis, discuss the workup of a patient with suspected osteolysis, and present a review of the evidence of various management strategies, including grafting of cysts, revision TAA, and arthrodesis.Level of Evidence: Level V, expert opinion.

Decision/therapeutic algorithm for acetabular revisions

Background and aim:

Paprosky’s classification is currently the most used classification for periacetabular bone defects but its validity and reliability are widely discussed in literature. Aim of this study was to introduce a new CT-based Acetabular Revision Algorithm (CT-ARA) and to evaluate its validity. The CT-ARA is based on the integrity of five anatomical structures that support the acetabulum. Classification’s groups are defined by the deficiency of one or more of these structures, treatment is based on those groups.

Methods:

In 105 patients the validity of the CT-ARA was retrospectively evaluated using preoperative X-rays, CT-scan and surgery reports. The surgical indications suggested by Paprosky’s algorithm and by CT-ARA were compared with the final surgical technique. Patients were divided into two groups according to time of surgery.

Results:

We reported concordance of indications in 56,2% of cases with the Paprosky’s algorithm and in 63,8% of cases with the CT-ARA. Analysing only the most recent surgeries (group 2), we reported even higher difference of concordance (67,3% Paprosky’s algorithm and 83,7% CT-ARA). The concordance of the CT-ARA among Group 1 and Group 2 resulted significantly different.

Conclusions:

the CT-ARA may be a useful tool for the preoperative decision-making process and showed more correlation with performed surgery compared to the Paprosky’s algorithm.

Multiacquisition Variable-Resonance Image Combination Magnetic Resonance Imaging Used to Study Detailed Bone Apposition and Fixation of an Additively Manufactured Cementless Acetabular Shell

Background

The ability to utilize magnetic resonance imaging (MRI) to assess bony fixation in 3 dimensions may allow a better understanding of the implant design and bony integration. We hypothesized that a new 3-dimensionally printed cementless highly porous acetabular component (Stryker Trident II Tritanium^TM) would show better fixation than an earlier cup from the same manufacturer as assessed by the noninvasive technique of multispectral MRI.

Methods

Multiacquisition variable-resonance image combination selective metal suppression MRI was performed in 19 patients implanted with a new 3-dimensionally printed cup and 20 patients who had received a previous-generation cup from the same manufacturer at 1-year follow-up. Each cup was graded globally as well as by 9 specific zones. Integration grades were performed for each zone: 0, full bone integration; 1, fibrous membrane present; 2, osteolysis; and 3, fluid present. A mixed-effects logistic regression model was used to compare fixation between the 2 groups.

Results

All cups in both cohorts showed greater than 90% estimated global bony integration (3-dimensionally printed cups, 99.4%; regular cups 91.6%) with no osteolysis or fluid observed in any cup. The 3-dimensionally printed cup had 1 of 171 zones (0.6%) graded as fibrous membrane present, while the 2-dimensional group had 15 of 180 zones (8.3%) graded as fibrous. Of note, screw hole regions were omitted but may be read as fibrous membrane areas.

Conclusion

Using multiacquisition variable-resonance image combination selective MRI, our analysis showed greater osteointegration and less fibrous membrane formation in the 3-dimensionally printed cups than the control group at 1-year follow-up.

Recent update on crosslinked polyethylene in total hip arthroplasty

More than two decades after their clinical introduction, crosslinked polyethylenes (XLPE) have been widely adopted. Though concerns were initially raised regarding oxidation and brittleness, on a large scale, the first generation of XLPE continues to be highly effective 15 years after the surgery, even in a young and active population. Remelted XLPE might display lower wear rates than annealed XLPE. Second generation XLPEs, not only including sequentially irradiated and annealed but also associated with antioxidants, demonstrate encouraging short- to mid-term results. Registry data support clinical trial reports. Even in less favorable settings (lipped liners, dual mobility cups, revision surgery, hip resurfacing) results are promising. However, failures (fractures) have already been described. Therefore, a high level of surveillance remains crucial.

Computed Tomographic Osteolytic Analysis of a First-Generation Remelted Highly Cross-Linked Polyethylene in Total Hip Arthroplasty-At a Minimum of 15-Year Follow-Up

BACKGROUND

Low polyethylene wear rate and low incidence of osteolysis have been reported after total hip arthroplasty (THA) using first-generation remelted highly cross-linked polyethylene (HXLPE). However, osteolysis has not been evaluated in long-term studies of these patients (15 years or more). The present study assessed computed tomography (CT) images to determine the incidence of osteolysis associated with HXLPE in THA during at least 15 years of follow-up.

METHODS

We evaluated 105 primary THAs in 84 patients (77 women and 7 men). Mean follow-up was 15.9 years (range, 15-18 years). All THAs used a Longevity HXLPE liner and a 26-mm zirconia femoral head. Areas of osteolysis were identified from CT images using 3D and multiplanar reconstruction views.

RESULTS

CT 3D multiplanar reconstruction images at 15-year follow-up showed no obvious osteolysis in the acetabulum or femur of any patient. No patients developed cup loosening or liner breakage.

CONCLUSION

Our study indicates that first-generation remelted HXLPE liners do not increase the risk of osteolysis during 15-year follow-up and suggests that the wear particles from first-generation remelted HXLPE are less biologically active than those generated by conventional polyethylene devices.

Acetabular defects in revision hip arthroplasty: a therapy-oriented classification

INTRODUCTION

The treatment of severe acetabular bone loss remains a difficult challenge. No classification system is available that combines intuitive use, structured design and offers a therapeutic recommendation according to the current literature and modern state of the art treatment options. The goal of this study is to introduce an intuitive, reproducible and reliable guideline for the evaluation and treatment of acetabular defects.

METHODS

The proposed Acetabular Defect Classification (ADC) is based on the integrity of the acetabular rim and supporting structures. It consists of 4 main types of defects ascending in severity and subdivisions narrowing down-defect location. Type 1 presents an intact acetabular rim, type 2 includes a noncontained defect of the acetabular rim ≤ 10 mm, in type 3 the rim defect exceeds 10 mm and type 4 includes different kinds of pelvic discontinuity. A collective of 207 preoperative radiographs were graded according to ADC and correlated with intraoperative findings. Additionally, a randomized sample of 80 patients was graded according to ADC by 5 observers to account for inter- and intra-rater reliability.

RESULTS

We evaluated the agreement of preoperative, radiographic grading and intraoperative findings presenting with a k value of 0.74. Interobserver agreement presented with a k value of 0.62 and intraobserver at a k value of 0.78.

CONCLUSION

The ADC offers an intuitive, reliable and reproducible classification system. It guides the surgeon pre- and intraoperatively through a complex field of practice.

Osteolysis as it Pertains to Total Hip Arthroplasty

Osteolysis is a long-term complication of total hip arthroplasty (THA). As the projected number of THAs performed annually increases, osteolysis will likely continue to occur. However, because of advancements in prosthesis design, metallurgy, and enhanced bearing surfaces, fewer revision THAs will be linked to osteolysis and aseptic loosening. Despite these improvements, no preventative therapies are currently available for the management of osteolysis other than removing and replacing the source of bearing wear.

Periprosthetic acetabular radiolucency progression in mid-term follow-up of the articular surface replacement hip system

INTRODUCTION

Recent registry studies show that aseptic loosening secondary to osteolysis is the second leading cause of hip implant failure in patients implanted with metal-on-metal (MoM) bearings. The primary aim of our study was to report on the progression of acetabular osteolysis during mid-term follow-up in patients treated with MoM hip resurfacing arthroplasty (HRA) and MoM total hip arthroplasty (THA). The secondary aim was to identify independent predictors of osteolytic lesion progression.

MATERIALS AND METHODS

A total of 805 patients (805 hips) were included in this study (541 MoM HRA, 264 MoM THA) from a prospective, international clinical registry of the Articular Surface Replacement Hip System. Patients were enrolled a median of 6.6 years from surgery. Osteolytic lesion progression was defined either as any lesion developing de novo, or as an existing lesion progressing from radiolucency to osteolysis during the study period (range 0.5-4.3 years).

RESULTS

The number of cases with any osteolysis or radiolucency was 21 (3.9%) for ASR HRA and 29 (11.0%) for ASR XL THA at enrollment and increased to 69 (12.8%) for ASR HRA and 41 (15.5%) for ASR XL THA after follow-up. Osteolytic lesion progression was found in 66 (12.2%) ASR HRA patients and 31 (11.7%) ASR XL THA patients. Multivariate models determined that lower acetabular version angle (OR 0.963, p = 0.011) and elevated whole blood chromium (OR 1.110, p = 0.044) were independent predictors of osteolytic lesion progression in ASR HRA.

CONCLUSION

We suggest that physicians of patients implanted with ASR HRA implants closely monitor patients with higher chromium levels and lower version angles, as they are at increased risk for osteolytic lesion progression, and we recommend annual radiographic follow-up on all patients with ASR implants.

Otto Aufranc Award: Crosslinking Reduces THA Wear, Osteolysis, and Revision Rates at 15-year Followup Compared With Noncrosslinked Polyethylene

BACKGROUND

Crosslinked polyethylene (XLPE) liners used for primary THA have demonstrated lower wear rates than noncrosslinked, conventional polyethylene (CPE) liners through the first decade of clinical service. However, little high-quality evidence is currently available regarding the second decade performance of these implants and it remains uncertain whether the onset of osteolysis has simply been delayed or if the wear associated with XLPE liners will remain low enough that osteolysis will not occur. It is also unknown how the potential reductions in wear and osteolysis will influence long-term revision rates.

QUESTIONS/PURPOSES

Do patients who underwent THA with XLPE liners demonstrate (1) a lower rate of revision for wear-related complications; (2) a reduced wear rate; and (3) a lower frequency of osteolysis compared with those with CPE liners?

METHODS

Over an 18-month period from 1999 to 2000, 226 patients who had 236 primary THAs consented to participate in a randomized controlled trial conducted at one institution. To be eligible for intraoperative randomization, patients had to be implanted with a 28-mm cobalt-chrome alloy femoral head, a 4-mm lateralized liner, and the same cup and stem design. Six patients with six THAs were excluded intraoperatively because they did not receive study components for reasons unrelated to the liner material. The remaining 230 THAs among 220 patients were randomized to XLPE liners or CPE liners. The mean age at surgery was 62 ± 11 years and there were no differences in age, gender, or body mass index among the groups. There was no differential loss to followup between the study groups; among patients not known to be deceased or having undergone revision, minimum 14-year radiographic followup is available for 85 THAs including 46 with XLPE and 39 with CPE liners. Polyethylene wear was measured radiographically using Martell's Hip Analysis Suite and areas of osteolysis were evaluated before revision or at most recent followup. Revision rates at 15 years using reoperation for any reason and revision for wear or osteolysis were calculated using cumulative incidence considering patient death as a competing risk.

RESULTS

The cumulative incidence of revision at 15 years using reoperation for wear-related complications as an endpoint was lower in the XLPE group than the CPE group (0%, 95% confidence interval [CI], 0%-0% versus 12%, 95% CI, 7%-19%; p < 0.001). Among unrevised THAs with minimum 14-year radiographic followup, the mean steady-state linear wear rate for THAs with XLPE liners was lower than the mean linear wear rate for the THAs with CPE liners (0.03 ± 0.05 versus 0.17 ± 0.09 mm/year; mean difference, 0.14; 95% CI, 0.11-0.17; p < 0.001). Osteolysis of any size was noted among 9% (four of 46) of the hips in the XLPE group and 46% (18 of 39) of the hips in the CPE group (odds ratio, 0.19; 95% CI, 0.07-0.51; p < 0.001).

CONCLUSIONS

This randomized study with followup into the second decade demonstrated reductions in revision, wear, and osteolysis associated with the use of XLPE. The low wear rates and absence of any mechanical failures among the XLPE liners at long-term followup affirm the durability of these components that did not incorporate antioxidants. Although osteolysis has not been eliminated, it occurs infrequently and has not caused any clinical problems to date.

LEVEL OF EVIDENCE

Level I, therapeutic study.

Longitudinal morphological change of acetabular subchondral bone cyst after total hip arthroplasty in developmental dysplasia of the hip

PURPOSE

The purpose of this study is to clarify morphological changes of acetabular subchondral bone cyst after total hip arthroplasty for osteoarthritis secondary to developmental dysplasia of the hip.

METHODS

Two hundred and sixty-one primary cementless total hip arthroplasties of 208 patients, 18 males, 190 females, were retrospectively reviewed. Morphological changes of subchondral bone cyst were evaluated by computed tomography (CT). The mean cross-sectional area of the cyst from CT scans at 3 months postoperatively and after 7-10 years (average 8.4 years) were compared.

RESULTS

Acetabular subchondral bone cysts were found in 49.0% of all cases in preoperative CT scans. There was no cyst which was newly recognized in CT scan performed after postoperative 7-10 years. All the cross-sectional areas of the cysts evaluated in this study were reduced postoperatively.

CONCLUSIONS

This study revealed that acetabular subchondral bone cysts do not increase or expand after total hip arthroplasty and indicated that the longitudinal morphological change of acetabular bone cysts in patients of developmental dysplasia of the hip do not influence long-term implant fixation in total hip arthroplasty.

Acetabular defect classification in times of 3D imaging and patient-specific treatment protocols

Parallel to the rising number of revision hip procedures, an increasing number of complex periprosthetic osseous defects can be expected. Stable long-term fixation of the revision implant remains the ultimate goal of the surgical protocol. Within this context, an elaborate preoperative planning process including anticipation of the periacetabular defect form and size and analysis of the remaining supporting osseous elements are essential. However, detection and evaluation of periacetabular bone defects using an unsystematic analysis of plain anteroposterior radiographs of the pelvis is in many cases difficult. Therefore, periacetabular bone defect classification schemes such as the Paprosky system have been introduced that use standardized radiographic criteria to better anticipate the intraoperative reality. Recent studies were able to demonstrate that larger defects are often underestimated when using the Paprosky classification and that the intra- and interobserver reliability of the system is low. This makes it hard to compare results in terms of defects being studied. Novel software tools that are based on the analysis of CT data may provide an opportunity to overcome the limitations of native radiographic defect analysis. In the following article we discuss potential benefits of these novel instruments against the background of the obvious limitations of the currently used native radiographic defect analysis.

Agreement and precision of periprosthetic bone density measurements in micro-CT, single and dual energy CT

The objective of this study was to test the precision and agreement between bone mineral density measurements performed in micro CT, single and dual energy computed tomography, to determine how the keV level influences density measurements and to assess the usefulness of quantitative dual energy computed tomography as a research tool for longitudinal studies aiming to measure bone loss adjacent to total hip replacements. Samples from 10 fresh-frozen porcine femoral heads were placed in a Perspex phantom and computed tomography was performed with two acquisition modes. Bone mineral density was calculated and compared with measurements derived from micro CT. Repeated scans and dual measurements were performed in order to measure between- and within-scan precision. Mean density difference between micro CT and single energy computed tomography was 72 mg HA/cm³ . For dual energy CT, the mean difference at 100 keV was 128 mg HA/cm³ while the mean difference at 110-140 keV ranged from -84 to -67 mg HA/cm³ compared with micro CT. Rescanning the samples resulted in a non-significant overall between-scan difference of 13 mg HA/cm³ . Bland-Altman limits of agreement were wide and intraclass correlation coefficients ranged from 0.29 to 0.72, while 95% confidence intervals covered almost the full possible range. Repeating the density measurements for within-scan precision resulted in ICCs >0.99 and narrow limits of agreement. Single and dual energy quantitative CT showed excellent within-scan precision, but poor between-scan precision. No significant density differences were found in dual energy quantitative CT at keV-levels above 110 keV. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1470-1477, 2017.

Comparison of wear rate and osteolysis between second-generation annealed and first-generation remelted highly cross-linked polyethylene in total hip arthroplasty. A case control study at a minimum of five years

BACKGROUND

There is no previous report that directly compared wear resistance of second-generation annealed highly cross-linked polyethylene with that of first-generation remelted highly cross-linked polyethylene. We therefore performed a retrospective study at a minimum of 5-year follow-up comparing second-generation annealed and first-generation remelted highly cross-linked polyethylene in order to: (1) assess wear rates and (2) compare the incidence of osteolysis between, (3) identify the frequency of complication related to the two types of highly cross-linked polyethylene.

HYPOTHESIS

There is a difference in the linear wear rate and the incidence of osteolysis between the two types of highly cross-linked polyethylene in total hip arthroplasty.

MATERIALS AND METHODS

In a single centre study, we reviewed 123 primary cementless total hip arthroplasties between 2010 and 2011 that were performed with 32mm alumina ceramic on second-generation annealed (X3) or first-generation remelted (Longevity) highly cross-linked polyethylene liner. There was no specific reason for the choice of the type of highly cross-linked polyethylene. There were no significant differences between the two groups in respect of gender, diagnosis, body mass index, pre- and post-operative functional and activity score, cup size, and cup orientation except the younger age in the X3 group. The mean wear rate and the incidence of osteolysis were evaluated at the latest follow-up.

RESULTS

One hundred nine cases followed over 5 years post-operatively (88.6% in all consecutive cases) were evaluated. X3 and Longevity were used in 54 and 55 cases, respectively. The mean follow-up was 5.3 years in both groups. The mean linear wear rate of X3 and Longevity group was 0.045±0.023mm/year and 0.076±0.031mm/year, respectively (P<0.001). No osteolysis was found on plain X-rays in both groups and no specific complication was related to these highly cross-linked components.

DISCUSSION

Excellent wear resistance of both types of highly cross-linked polyethylene liner was revealed in our study. The difference of wear rate between two materials should be monitored in a longer follow-up.

LEVEL OF EVIDENCE

Level III retrospective case control study.

The Relationship Between Polyethylene Wear and Periprosthetic Osteolysis in Total Hip Arthroplasty at 12 Years in a Randomized Controlled Trial Cohort

BACKGROUND

Polyethylene acetabular components are common in hip arthroplasty. Highly cross-linked polyethylene (HXLPE) has lower wear than ultra-high molecular weight polyethylene (UHMWPE). Evidence suggests that wear particles induce inflammation causing periprosthetic osteolysis contributing to implant loosening with wear rates of 0.05 mm/y were considered safe. We aimed to compare incidence and volume of periacetabular osteolysis between HXLPE and UHMWPE using computed tomography.

METHODS

Initially, 54 hips in 53 patients were randomized to HXLPE or UHMWPE acetabular liner. At 10 years, 39 hips in 38 patients remained for the radiostereometric analysis' demonstrating significantly lower wear in the HXLPE group. At 12 years, 14 hips in 13 patients were lost to follow-up leaving 25 hips for computed tomography assessment. Images were reconstructed to detect osteolysis and where identified, areas were segmented and volumized.

RESULTS

Osteolysis was observed in 8 patients, 7 from the UHMWPE group and only 1 from the HXLPE group (Fisher exact, P = .042). There was no correlation between the amount of polyethylene wear and osteolysis volume; however, the radiostereometric analysis-measured wear rate in patients with osteolysis from both groups was significantly higher than overall average wear rate.

CONCLUSION

This data demonstrates lower incidence of periacetabular osteolysis in the HXLPE group of a small cohort. Although numbers are too low to estimate causation, in the context of lower wear in the HXLPE group, this finding supports the hypothesis that HXLPE may not elevate osteolysis risk, and hence does not suggest that HXLPE wear particles are more biologically active than those generated by earlier generations of polyethylene.

Long-Term Results of Third-Generation Ceramic-on-Ceramic Bearing Cementless Total Hip Arthroplasty in Young Patients

BACKGROUND

The results of third-generation of alumina-on-alumina ceramic bearing in a large number of patient cohorts are limited. The purpose of this study was to determine clinical and radiologic outcome, prevalence of osteolysis detected with radiographs and computerized tomographic scan, and survivorship of a cementless total hip arthroplasty using a third-generation of alumina-on-alumina ceramic bearing in a large number of active patients aged younger than 65 years.

METHODS

We reviewed the cases of 871 patients (1131 hips) who underwent a cementless total hip arthroplasty when they were aged 65 years or younger at the time of surgery. The most common diagnoses were osteonecrosis (53%) and osteoarthritis (20%). Harris hip score, Western Ontario and McMaster Universities Osteoarthritis Index, and University of California, Los Angeles activity scores were recorded. Radiographic and computerized tomographic evaluations were used to evaluate implant fixation and osteolysis. The mean follow-up interval was 18.8 years (range, 15-20 years).

RESULTS

At the time of final follow-up, the mean Harris hip score, Western Ontario and McMaster Universities Osteoarthritis Index score, and University of California, Los Angeles activity score were 90 points, 15 points, and 8 points, respectively. All the femoral stem and acetabular components were well-fixed at the time of final follow-up. No hip had aseptic loosening or osteolysis or fracture of ceramic material at the time of the final follow-up.

CONCLUSION

The current results with the use of the third-generation of alumina-on-alumina ceramic bearings in young patients suggest that cementless acetabular and femoral components provide outstanding long-term fixation and provide a high rate of survivorship without evidence of osteolysis.

Comparison of wear rate and osteolysis between annealed and remelted highly cross-linked polyethylene in total hip arthroplasty. A case control study at 7 to 10 years follow-up

BACKGROUND

Low polyethylene wear rate and low incidence of osteolysis after total hip arthroplasty using annealed and remelted highly cross-linked polyethylene have been reported. However, there is no previous report that directly compared both types of highly cross-linked polyethylene. We therefore performed a retrospective study on a series of highly cross-linked polyethylene, in order to: (1) compare wear rates and the incidence of osteolysis between annealed and remelted highly cross-linked polyethylene at 7-10 years; (2) identify the frequency of complication related to annealed and remelted highly cross-linked polyethylene.

HYPOTHESIS

There is no difference in the linear wear rate and the incidence of osteolysis between the annealed and remelted highly cross-linked polyethylene in total hip arthroplasty.

PATIENTS AND METHODS

Two hundred and sixteen cases of cementless total hip arthroplasties with annealed or remelted highly cross-linked polyethylene, which were performed between January 2003 and December 2006 in one institution, were followed for 7-10 years and received computed tomography scan, in addition to radiography at the latest follow-up. Annealed and remelted highly cross-linked polyethylene was used in 91 cases and 125 cases, respectively. A 26-mm cobalt-chromium head was used in all cases. Penetration rates from 1 year to the last evaluation were used to estimate the yearly linear wear rate. Existence of osteolysis was evaluated by plain radiography and computed tomography.

RESULTS

There were no significant differences in patients' background between the two groups. The linear wear rate of annealed and remelted group was 0.031±0.022mm/year and 0.032±0.020mm/year, respectively (P=0.91). Two cases of small femoral osteolysis were found in the annealed group. Any complication related to highly cross-linked polyethylene was not found in both groups.

DISCUSSION

There was no significant difference in the linear wear rate and the incidence of osteolysis between the annealed and remelted group at postoperative 7 to 10 years. Excellent results of both types of highly cross-linked polyethylene were revealed by this study.

LEVEL OF EVIDENCE

Level III retrospective case control study.

Implant survival and radiographic outcome of total hip replacement in patients less than 20 years old

Background and purpose - Total hip replacement (THR) is not recommended for children and very young teenagers because early and repetitive revisions are likely. We investigated the clinical and radiographic outcomes of THR performed in children and teenage patients. Patients and methods - We included 111 patients (132 hips) who underwent THR before 20 years of age. They were identified in the Norwegian Arthroplasty Register, together with information on the primary diagnosis, types of implants, and any revisions that required implant change. Radiographs and Harris hip score (HHS) were also evaluated. Results - The mean age at primary THR was 17 (11-19) years and the mean follow-up time was 14 (3-26) years. The 10-year survival rate after primary THR (with the endpoint being any revision) was 70%. 39 patients had at least 1 revision and 16 patients had 2 or more revisions. In the latest radiographs, osteolysis and atrophy were observed in 19% and 27% of the acetabulae and 21% and 62% of the femurs, respectively. The mean HHS at the final follow-up was 83 (15-100). Interpretation - The clinical score after THR in these young patients was acceptable, but many revisions had been performed. However, young patients with developmental dysplasia of the hip had lower implant survival. Moreover, the bone stock in these patients was poor, which could complicate future revisions.

Long-term outcomes of the Bi-Metric proximally hydroxyapatite-coated femoral stem

PURPOSE

Promising clinical results and survival rates have been reported for the Bi-Metric proximally hydroxyapatite (HA)-coated femoral stem in short- and mid-term studies. In this study we evaluated the long-term survival as well as clinical and radiological results of this stem.

METHODS

From 1992 to 1998 we prospectively included 112 consecutive patients who received a total hip arthroplasty (THA) with an uncemented proximally HA-coated Bi-Metric femoral component (Biomet).At 3 months, 1 year and thereafter every 2 to 3 years, patients were clinically and radiologically monitored. Primary endpoint was revision of the stem for any reason. Secondary endpoints were survival of the cup and THA, radiological characteristics and clinical scores (HHS, HOOS, SF-36 and VAS).

RESULTS

Median follow-up was 20 (16-22.25) years. Median age at surgery was 52 (22-63) years. At final follow-up, survival analysis showed an all-cause stem survival of 96.8% (95% CI, 93.3-100). Median HHS scores improved from 57 preoperatively to 94 at final follow-up (p&lt;0.001). At final follow-up the median HOOS score was 80 (9-100); median SF-36 score 71 (18-100); median VAS pain score at rest 0 (0-6) and during activity 0 (0-10).

CONCLUSIONS

In this prospective cohort study the 20-year survival rate of the Bi-Metric proximally HA-coated femoral stem was excellent.

Limited significance of screening computed tomography after cementless total hip arthroplasty with highly cross-linked polyethylene at 7-10 years of follow-up

OBJECTIVES

The purpose of this retrospective study is to report the incidence of osteolysis and evaluate the significance of screening computed tomography (CT) compared to plain radiography in detecting osteolysis after total hip arthroplasty with metal-on-highly cross-linked polyethylene bearings.

METHODS

We retrospectively reviewed 264 primary cementless total hip arthroplasties of 211 patients, 24 males, 187 females, who received postoperative screening CT scan in addition to radiography at postoperative 7-10 years (average 8.2 years). First-generation highly cross-linked polyethylene was used in all cases.

RESULTS

On the plain radiographs, no acetabular osteolysis (0%) and two cases of femoral osteolysis (0.8%) were found in the follow-up period. No osteolysis was newly found by screening CT scan.

CONCLUSIONS

Very low incidence of osteolysis after total hip arthroplasty with highly cross-linked polyethylene at postoperative 7-10 years was confirmed, and routine screening CT scan for detecting osteolysis in this setting was not supported from this study.

The Usefulness of Three-dimensional Computed Tomography as an Assessment of Periacetabular Osteolysis in Revision Total Hip Arthroplasty

Purpose

This study was performed to determine the usefulness of three-dimensional computed tomography (3D-CT) in measuring periacetabular osteolysis by comparing the real volume of osteolysis in revision surgery.

Materials and Methods

Twnety-three patients who had undergone revision surgery due to periacetabular osteolysis but not included septic osteolysis and implant loosening. The mean age of patients at the time of surgery was 55.2 years. And the mean time interval between the primary total hip arthroplasty and revision surgery was 13.3 years. We measured the polyethylene wear in plain radiographs using computer assisted vector wear analysis program, the volume of acetabular osteolytic lesions in high-resolution spiral CT scans using Rapidia 3D software version 2.8 algorithms before the revision surgery were performed. Intraoperative real osteolytic volume was calculated as the sum of the volumetric increments of the acetabular cup and impacted allo-cancellous bone volume.

Results

Strong correlation was found between the volume of acetabular osteolytic lesions measured on 3D-CT and intraoperative real osteolytic volume which was calculated as the sum of the volumetric increments of the acetabular cup and impacted allo-cancellous bone volume.

Conclusion

3D-CT is considered a useful method for assessing and measuring the volume of periacetabular osteolysis before revision surgery.

Lower Dislocation Rate Following Total Hip Arthroplasty via Direct Anterior Approach than via Posterior Approach: Five-Year-Average Follow-Up Results

Objective:

The aim of the study was to compare the dislocation rate between total hip arthroplasty (THA) via direct anterior approach (DAA) and via posterior approach (PA).

Methods:

We compared a consecutive series of 139 THAs via DAA with 177 THAs via PA. All study patients received ceramic-on-ceramic bearing surfaces and similar uncemented prostheses. Dislocation-free survival after THA was estimated using the Kaplan–Meier survival method and compared between groups using the log-rank test.

Results:

In the DAA group, none of 139 hips experienced dislocations in five-year-average follow-up. In the PA group, seven hips experienced dislocations among 177 hips (4 %). The dislocation was significantly less in the DAA group compared to the PA group (p = 0.033).

Conclusion:

The dislocation rate of THA via DAA was significantly less than that of THA via PA.

Clinical outcomes, survivorship and adverse events with mobile-bearings versus fixed-bearings in hip arthroplasty-a prospective comparative cohort study of 143 ADM versus 130 trident cups at 2 to 6-year follow-up

The principle of dual mobility cups, often called "tripolar", has been developed to overcome the problem of instability following primary hip arthroplasty. We prospectively compared two cohorts which differed only by the type of bearings, i.e." mobile bearing hip" (MBH) in a 143-study cohort of ADM cups versus "fixed bearing hip" (FBH) of 130 Trident PSL cups, at a follow-up at 2-6years. The survival rates at 4.13-years, with instability as endpoint was significantly (P=0.0176) in favor of mobile bearings at 100% with no dislocation reported, versus 94.8% with fixed bearings. These mobile bearings, matching both "modern" dual mobility cups and annealed highly crossed polyethylene, would appear to offer at longer follow-up a valuable solution to clinical outcomes in acetabular arthroplasty.

Influence of clinical and radiological variables on the extent and distribution of periprosthetic osteolysis in total hip arthroplasty with a hydroxyapatite-coated multiple-hole acetabular component: a magnetic resonance imaging study

Polyethylene wear-induced osteolysis constitutes the most severe long-term complication of total hip arthroplasties (THA). Our aim was to assess through MRI the severity and growth pattern of osteolysis, as well as the influence clinical-radiographic variables exert. We analyzed 75 THA with an average evolution time of 13.67years. The implant was a titanium alloy, non-cemented, multiple-hole model with hydroxyapatite coating. Osteolysis was found with a peripheral pattern in 48 and a central pattern in 6; in 52 cases it was continuous, and in 4, isolated. Out of 118 screws, 20 exhibited lysis. There was a proportional correlation between osteolysis severity and wear rate with age, physical activity and acetabular abduction, as well as an association between said variables and peripheral and continuous patterns.

No differences found in bearing related hip survivorship at 10-12 years follow-up between patients with ceramic on highly cross-linked polyethylene bearings compared to patients with ceramic on ceramic bearings

At a minimum follow-up of ten years we compared clinical and radiographic findings and survivorship in a cohort of 412 patients (447 hips) who received alumina on alumina CoC bearings to findings from a cohort of 216 patients (228 hips) with alumina on highly cross-linked polyethylene (HXLPE) bearings. All patients were operated for osteoarthritis. With bearing-related complications as endpoint, analysis showed no significant difference in survivorship between cohorts (99.8% for the CoC vs. 99.4% for HXLPE). In addition, there were no significant differences in clinical and radiographic findings between cohorts. We concluded that alumina on HXLPE bearings are a reasonable lower cost alternative to ceramic on ceramic bearing couples.

Elevation of serum tumor necrosis factor α in patients with periprosthetic osteolysis: a case-control study

BACKGROUND

Periprosthetic osteolysis is the leading reason for THA revision. The relationship of serum biomarkers with severe radiographic periprosthetic osteolysis has not been defined but may be important to direct future research and clinical therapeutics.

QUESTIONS/PURPOSES

We determined whether there was an association between measurable inflammatory markers (high-sensitivity C-reactive protein [hsCRP]) or inflammatory mediators (tumor necrosis factor α [TNF-α], IL-1β, IL-6, receptor activator of nuclear factor κB ligand [RANKL], and osteoprotegerin [OPG]) and periprosthetic osteolysis.

METHODS

We identified 15 patients with THAs scheduled for revision surgery because of severe periprosthetic osteolysis. For each study patient, a nonosteolytic, pain-free control patient with THAs was identified and matched for age, sex, time since initial THA, acetabular and femoral component prosthesis material, and prosthesis wear within 1.0 mm/year using a manual wear analysis technique. Overall, the study and control patients had a mean wear rate of 0.25 mm/year since index THA. There were no differences in baseline characteristics between study and control patients in age, sex, BMI, Charlson Comorbidity Index, time since initial THA, UCLA activity score, and acetabular and femoral component type. Serum hsCRP, IL-1β, IL-6, TNF-α, RANKL, and OPG were measured by ELISA in duplicate assays. Differences in values were assessed using the Wilcoxon rank-sum test.

RESULTS

Median TNF-α levels were higher in study patients than in controls (7.1 pg/mL [SD, 11.6 pg/mL] versus 1.5 pg/mL [SD, 1.3 pg/mL]) (p < 0.01). Median IL-6 levels tended to be higher in study patients than in controls (8.9 pg/mL [SD, 13.2 pg/mL] versus 3.5 pg/mL [SD, 0.7 pg/mL]) (p = 0.09). The other serum inflammatory proteins and mediators of bone turnover were not different between groups.

CONCLUSIONS

TNF-α is elevated in patients with osteolysis compared to matched controls. The role of TNF-α and its potential as a target of nonsurgical therapy to prevent osteolysis warrant further investigation in larger, prospective studies.

MRI does not detect acetabular osteolysis around metal-on-metal Birmingham THA

OBJECTIVE

Osteolysis has not been recognized as a common failure mode of the Birmingham modular metal-on-metal (MoM) total hip arthroplasty (THA). The clinical value of metal artifact reduction sequence (MARS) magnetic resonance imaging (MRI) to assess the periprosthetic soft tissue is well documented; however, the appropriate image modalities to detect periacetabular osteolysis remain unclear. Eleven patients with periacetabular osteolysis within 3-6 years after uncemented Birmingham modular MoM THA with a synergy stem are presented. All 11 patients received corresponding standardized AP pelvis radiographs, high-quality MARS MRIs and CT scans with a metal artifact reduction sequence. While periacetabular osteolysis around MoM THA was not detected on MARS MRI in ten patients, CT imaging identified osteolysis in all patients. Periacetabular osteolysis appears to be a failure mechanism of the Smith & Nephew Birmingham MoM THA.

DISCUSSION

There is no evidence in the literature to support the effectiveness of MARS MRI to detect periacetabular osteolysis around cobalt chromium alloy metal-on-metal total hip arthroplasties. Osteolysis due to corrosion-related particles seems to be one of the primary modes of failure in modular MoM THA.

CONCLUSIONS

MRI is not a sensitive test to identify periacetabular osteolysis. The authors recommend CT for the screening of implants with this failure mode. Our study suggests that patients with a Birmingham modular MoM THA are at increased risk to develop acetabular osteolysis and should be carefully monitored for this failure mode.

Radiographically undetectable periprosthetic osteolysis with ASR implants: the implication of blood metal ions

Patients with ASR implants (resurfacing and large-diameter (XL) metal-on-metal (MoM) total hip arthroplasty), even if asymptomatic and with a stable prosthesis, may present extremely high blood metal ion levels. We report on a consecutive series of fourteen ASR revisions, focusing on osteolysis and their radiographic correspondence and their correlation with blood metal ion levels. At revision, seven hips revealed severe periacetabular osteolysis which was radiographically undetectable in six and asymptomatic in five. Seven hips with no acetabular osteolysis had significantly lower serum Cr and Co ion concentrations (respectively 25.2, 41.1 μg/l) compared to the seven hips with severe acetabular bone loss (respectively 70.1, 147.0 μg/l). Elevated blood metal ion levels should be considered as a warning of undetectable and ongoing periprosthetic osteolysis in asymptomatic patients with ASR prosthesis.

Uncemented third-generation ceramic-on-ceramic total hip arthroplasty using metal acetabular shell with direct taper locking liner

BACKGROUND

The ceramic-on-ceramic (CoC)-bearing couple in total hip arthroplasty (THA) was developed to reduce the wear debris and osteolysis. Although the mechanical strength of third-generation ceramic has improved over previous generations, the risk of osteolysis and ceramic fracture is still an important concern.

METHODS

We studied 124 uncemented THAs with third-generation CoC-bearing couple implanted between 2000 and 2004. The ceramic liner and head were secured with the direct taper locking mechanism. One hundred and eleven hips were followed-up for minimum of 8 years, with an average follow-up period of 10.1 years (range 8.0-12.8 years). Patients were evaluated with a particular emphasis on the prevalence of the osteolysis and the ceramic fracture.

RESULTS

The survivorship with the end point as implant revision for any reason was 94.9 % (95 % confidence intervals 90.0-99.3 %) at 12.8 years. Revisions were performed because of one ceramic liner fracture, three dislocations, and two deep infections. No radiographic evidence of wear or osteolysis was observed. The preoperative Merle d'Aubigne and Postel hip score increased from 11.6 to 17.1.

CONCLUSIONS

Patients, who received third-generation CoC THA had no detectable wear and osteolysis. One ceramic fracture occurred, and the main reason for revision was dislocation.

Limitations of conventional radiographs in the assessment of acetabular defects following total hip arthroplasty

BACKGROUND

Conventional radiographs are routinely used to evaluate acetabular bone loss as part of the follow-up in patients who undergo total hip arthroplasty (THA). The objective of this study was to examine the accuracy and specificity of conventional radiographs reviewed by arthroplasty surgeons in detecting acetabular bone loss in patients with prior THA.

METHODS

Using a cadaveric pelvic model, a defined percentage of bone was incrementally removed from the posterior acetabular column, followed by implantation of uncemented cups into both acetabula. Ten orthopedic arthroplasty surgeons, blinded to the defect sizes, assessed the percentage of bone defect using standard anteroposterior, Judet and oblique conventional radiographs.

RESULTS

Observers were unable to accurately grade bone defects using conventional radiographs. For defects less than 50%, observers reported on average a defect of 11%. Although observer estimates of defects 50% or more increased, these treatment-altering bone deficiencies remained grossly underestimated, with a sensitivity and specificity of 36.6% and 97.6%, respectively.

CONCLUSION

Conventional radiographs reviewed by experienced arthroplasty surgeons do not reliably detect small bone lesions (< 50%). Although more successful in detecting larger bone lesions, surgeons tend to underestimate actual bone loss. Computed tomography scanning may be indicated if accurate estimation of acetabular bone loss is required in patients who have undergone previous THA.

Ten- to 15-year clinical and radiographic results for a compression molded monoblock elliptical acetabular component

The aim of this study was to report the long-term results from a previously published midterm follow-up of a titanium monoblock, elliptical acetabular component. A total of 258 primary total hip arthroplasties (212 patients) with a monoblock, acetabular component were followed up for a mean period of 11.1 years (10-15). Average yearly wear rate was 0.08 mm/y (0.0009-0.32). Acetabular radiolucencies were present in 6 hips (2.4%); all were nonprogressive and present in acetabular zone I. Acetabular osteolysis was present in 5 patients (5 hips, 1.9%); all cups were stable. Four acetabular components were revised, 3 because of recurrent instability. No acetabular components were revised for polyethylene wear or dissociation, acetabular osteolysis, loosening, or deep infection. This monoblock design demonstrates excellent long-term survival and low rate of osteolysis.

Progression of periacetabular osteolytic lesions

BACKGROUND

The development of three-dimensional computed tomography (CT) imaging techniques has enabled the detection, accurate measurement, and monitoring of periprosthetic osteolytic lesions. The aim of this study was to track the progression in size of osteolytic lesions and to determine those factors that are associated with the risk of progression. A secondary aim was to investigate whether progression in size of osteolytic lesions could be monitored with use of radiographs.

METHODS

We retrospectively determined, with use of sequential CT scans, the progression of periacetabular osteolysis over a period of as much as nine years in a cohort of twenty-six patients (thirty acetabular components) in whom the cementless acetabular component or components had been in place for longer than ten years at the time of the initial CT scan. High-resolution CT scans with metal-artifact suppression were used to determine the volume of osteolytic lesions. Progression in the size of osteolytic lesions per year was calculated as the change in the volume of osteolytic lesions between serial CT scans. Associations were determined between the progression in size of osteolytic lesions, osteolysis rate at the initial CT, patient age, sex, walking limitations, and activity level. Progression in size of osteolytic lesions as determined with use of CT was compared with that determined with use of radiographs.

RESULTS

Mean progression in the size of osteolytic lesions, as determined with use of CT, was 1.5 cm(3)/yr (range, 0 to 7.5 cm(3)/yr). The amount of osteolysis at the initial CT scan and patient activity were good predictors of osteolytic lesion progression. The strongest predictor of osteolytic lesion progression occurred when these two risk factors were combined (p = 0.0019). The value of radiographs was limited to monitoring of larger lesions identified by CT.

CONCLUSIONS

This is the first study to report on the progression of osteolysis adjacent to cementless acetabular components from medium to long-term follow-up. The data suggest that the osteolysis rate at the initial CT and patient activity can be useful factors in predicting the progression in size of periacetabular osteolytic lesions.

High 10-year survival rate with an anatomic cementless stem (SPS)

BACKGROUND

Proximal cementless fixation using anatomic stems reportedly increases femoral fit and avoids stress-shielding. However, thigh pain was reported with the early stem designs. Therefore, a new anatomic cementless stem design was based on an average three-dimensional metaphyseal femoral shape. However, it is unclear whether this stem reduces the incidence of thigh pain.

QUESTIONS/PURPOSES

We asked whether this stem design was associated with a low incidence of thigh pain and provided durable fixation and high function.

METHODS

One hundred seventy-one patients (176 THAs) who had the anatomic proximal hydroxyapatite-coated stem implanted were reviewed. Eleven (6%) patients were lost to followup and 34 (20%) died without revision surgery. We used the Harris hip score (HHS) to assess pain and function. We evaluated femoral stem fixation and stability with the score of Engh et al. and also calculated a 10-year survival analysis. We assessed 126 patients (131 hips) at a mean followup of 10 years (range, 8-11 years)

RESULTS

At last followup, two patients described slight thigh pain that did not limit their physical activities. All stems appeared radiographically stable and one stem was graded nonintegrated but stable. Five patients had revision surgery: one on the femoral side (for posttraumatic fracture) and four on the acetabular side. Considering stem revision for aseptic loosening as the end point, survivorship was 100% (range, 95.4%-99.9%) at 10 years.

CONCLUSION

This anatomic cementless design using only metaphyseal fixation with a wide mediolateral flare, a sagittal curvature, and torsion, allowed durable proximal stem stability and fixation.

Bulk femoral head autograft without decortication in uncemented total hip arthroplasty: seven- to ten-year results

Superolateral acetabular bone defect is a serious challenge in uncemented total hip arthroplasty for acetabular dysplasia. We report a bulk bone autografting technique without decortication of the acetabulum and femoral head contact surfaces in 22 joints. Mean follow-up time was 8.3 years, and survival rates were 100% for loosening and revision end points. The preoperative Japanese orthopedic association hip score increased from 49.5 to 94.0. Although trabecular bridging and graft remodeling occurred in all cases, complete trabecular reorientation was observed in only 15 joints. Eccentric polyethylene wear was observed in 8 of 22 joints, and osteolysis, in 1 joint. Our technique is easy to perform, and midterm results were favorable; thus, we conclude that it may be an effective option for bulk bone autografting.

Common sonographic findings in the painful hip after hip arthroplasty

Diagnosing the cause of hip pain in patients with hip arthroplasty can be challenging because of the numerous possible causes of pain and artifacts caused by the prosthetic components on computed tomography and magnetic resonance imaging. Sonography plays an important role in the diagnosis and management of these patients because the soft tissues surrounding the prosthetic joint are not obscured by artifacts and because sonography enables hands-on examination of the painful site, dynamic evaluation of moving structures, and comparison with the opposite side. Another advantage of sonography is the ability to perform sonographically guided diagnostic and therapeutic procedures. In this pictorial essay, we highlight commonly encountered sonographic findings in patients with hip pain after hip arthroplasty.

Measuring femoral lesions despite CT metal artefacts: a cadaveric study

OBJECTIVE

Computed tomography is the modality of choice for measuring osteolysis but suffers from metal-induced artefacts obscuring periprosthetic tissues. Previous papers on metal artefact reduction (MAR) show qualitative improvements, but their algorithms have not found acceptance for clinical applications. We investigated to what extent metal artefacts interfere with the segmentation of lesions adjacent to a metal femoral implant and whether metal artefact reduction improves the manual segmentation of such lesions.

MATERIALS AND METHODS

We manually created 27 periprosthetic lesions in 10 human cadaver femora. We filled the lesions with a fibrotic interface tissue substitute. Each femur was fitted with a polished tapered cobalt-chrome prosthesis and imaged twice--once with the metal, and once with a substitute resin prosthesis inserted. Metal-affected CTs were processed using standard back-projection as well as projection interpolation (PI) MAR. Two experienced users segmented all lesions and compared segmentation accuracy.

RESULTS

We achieved accurate delineation of periprosthetic lesions in the metal-free images. The presence of a metal implant led us to underestimate lesion volume and introduced geometrical errors in segmentation boundaries. Although PI MAR reduced streak artefacts, it led to greater underestimation of lesion volume and greater geometrical errors than without its application.

CONCLUSION

CT metal artefacts impair image segmentation. PI MAR can improve subjective image appearance but causes loss of detail and lower image contrast adjacent to prostheses. Our experiments showed that PI MAR is counterproductive for manual segmentation of periprosthetic lesions and should be used with care.

The Ringloc liner compared with the Hexloc liner in total hip arthroplasty

The aim of this study was to compare the 10-year survival rate, pelvic osteolysis frequency and linear head penetration rate of the Hexloc and Ringloc liners used together with a partially threaded porous and hydroxyapatite coated cup and the Bi-Metric uncemented femoral stem. The 15-year results for the cup with the Hexloc liner are also reported. We included 332 consecutive hips (166 Hexloc and 166 Ringloc) on 281 patients in the study. Revisions of prosthesis components were recorded and pelvic osteolytic lesions were assessed using radiographs and computed tomography. The linear head penetration rate was measured using the Martell method. The 10-year survival rate of the liner with revision due to liner wear and/or osteolysis as endpoint was 88% for the Hexloc liner and 98% for the Ringloc liner. The 15-year survival rate of the Hexloc liner was 67%. Pelvic osteolysis was found in 27% of the Hexloc and 19% of the Ringloc hips. After 15 years, 53% of the Hexloc hips had developed an osteolytic lesion. The linear head penetration rate was 0.16 mm/year for the Hexloc liner and 0.12 mm/year for the Ringloc liner. This paper is the first to describe the rapidly deteriorating survival up to 15 years with the old generation gamma-in-air sterilized polyethylene used in Hexloc liners. The newer Ringloc liner with the ArCom™ polyethylene has superior clinical results but a linear wear rate and frequency of osteolytic lesions that is higher than expected.

Imaging of hip arthroplasty

The imaging evaluation of the prosthetic hip begins with radiography, but arthrography, aspiration, scintigraphy, sonography, CT and MR imaging all have roles in the evaluation of the painful prosthesis. This article will review the appearance of normal hip arthroplasty including hemiarthroplasty, total arthroplasty, and hip resurfacing, as well as the appearances of potential complications such as aseptic loosening and osteolysis, dislocation, infection, periprosthetic fracture, hardware failure, and soft tissue abnormalities.

Early reactive synovitis and osteolysis after total hip arthroplasty

BACKGROUND

Little is known about intraarticular pathology following THA prior to the radiographic appearance of osteolysis, primarily due to imaging limitations. MRI has recently been applied to imaging the postarthroplasty hip with the ability to detect periarticular bony and soft tissue pathology; specifically, it is able to detect abnormal synovial patterns and focal bone loss well before the radiographic appearance of osteolysis.

QUESTIONS/PURPOSES

We therefore used MRI to determine the incidence of early reactive synovitis and osteolysis in asymptomatic patients after THA, and whether there is an association between these MRI findings and clinical outcomes or radiographic wear measurements at this early stage.

METHODS

We recruited 31 patients (33 hips) who underwent routine noncemented THA with one of three types of bearing surfaces: metal-on-cross-linked polyethylene (n = 7), ceramic-on-ceramic (n = 12), and ceramic-on-cross-linked polyethylene (n = 14). Patients underwent specialized MRI at a minimum of 12 months (mean, 23 months; range, 12-37 months) after surgery. MR images were analyzed for the presence of synovitis or osteolysis. WOMAC scores, patient assessment questionnaires, and radiographic wear measurements were correlated with MRI findings.

RESULTS

Reactive synovitis was observed in 13 of 33 patients (39%) and focal osteolysis in one of 33 (3%). The presence of synovitis did not correlate with pain, activity level, patient satisfaction or clinical outcome scales, nor did it correlate with radiographic wear measurements at early followup.

CONCLUSIONS

Our observations suggest reactive synovitis is common yet asymptomatic at short-term followup. We do not know either the etiology or the long-term implications of these observations.