Metallosis after contemporary metal-on-metal total hip arthroplasty. Five to nine-year follow-up

Fe and C additions decrease the dissolution rate of silicon nitride coatings and are compatible with microglial viability in 3D collagen hydrogels

Silicon nitride (SiN) coatings may reduce unwanted release of metal ions from metallic implants. However, as SiN slowly dissolves in aqueous solutions, additives that reduce this dissolution rate would likely increase the lifetime and functionality of implants. Adding iron (Fe) and carbon (C) permits tuning of the SiN coatings' mechanical properties, but their effect on SiN dissolution rates, and their capacity to reduce metal ion release from metallic implant substrates, have yet to be investigated. Such coatings have recently been proposed for use in spinal implants; therefore, it is relevant to assess their impact on the viability of cells expected at the implant site, such as microglia, the resident macrophages of the central nervous system (CNS). To study the effects of Fe and C on the dissolution rate of SiN coatings, compositional gradients of Si, Fe and C in combination with N were generated by physical vapor deposition onto CoCrMo discs. Differences in composition did not affect the surface roughness or the release of Si, Fe or Co ions (the latter from the CoCrMo substrate). Adding Fe and C reduced ion release compared to a SiN reference coating, which was attributed to altered reactivity due to an increase in the fraction of stabilizing Si-C or Fe-C bonds. Extracts from the SiN coatings containing Fe and C were compatible with microglial viability in 2D cultures and 3D collagen hydrogels, to a similar degree as CoCrMo and SiN coated CoCrMo reference extracts. As Fe and C reduced the dissolution rate of SiN-coatings and did not compromise microglial viability, the capacity of these additives to extend the lifetime and functionality of SiN-coated metallic implants warrants further investigation.

Osteolysis in total hip arthroplasty in relation to metal ion release: Comparison between monolithic prostheses and different modularities

BACKGROUND

Among the various complications associated with total hip arthroplasty (THA) periprosthetic osteolysis and wear phenomena due to the release of metal particles, are two of the most common and have been reported to be correlated because of inflammatory responses directed towards released particles that generally activate macrophagic osteolytic effects. Therein, new masses known as pseudotumors can appear in soft tissues around a prosthetic implant. To date, there is paucity of reliable data from studies investigating for any association between the above mentioned adverse events.

AIM

To investigate for the existence of any association between serum and urine concentrations of metal-ions released in THA and periprosthetic osteolysis for modular neck and monolithic implants.

METHODS

Overall, 76 patients were divided into three groups according to the type of hip prosthesis implants: Monoblock, modular with metal head and modular with ceramic head. With an average f-up of 4 years, we conducted a radiological evaluation in order to detect any area of osteolysis around the prosthesis of both the femur and the acetabulum. Moreover, serum and urinary tests were performed to assess the values of Chromium and Cobalt released. Statistical analysis was performed to determine any association between the ion release and osteolysis.

RESULTS

For the 3 study groups, the monolithic, modular ceramic-headed and modular metal-headed implants had different incidences of osteolysis events, which were higher for the modular implants. Furthermore, the most serious of these (grade 3) were detected almost exclusively for the modular implants with metal heads. A mapping of the affected areas was performed revealing that the highest incidences of osteolysis were evidenced in the pertrochanteric region at the femur level, and in the supero-external region at the acetabular level. Regarding the evaluation of the release of metals-ions from wear processes, serum and urinary chromium and cobalt values were found to be higher in cases of modularity, and even more so for those with metal head. Statistical linear correlation test results suggested positive correlations between increasing metal concentrations and incidences areas of osteolysis. However, no cases of pseudo-tumor were detected.

CONCLUSION

Future studies are needed to identify risk factors that increase peri-prosthetic metal ion levels and whether these factors might be implicated in the triggering of local events, including osteolysis and aseptic loosening.

Revision of total knee replacement (TKR) secondary to raised cobalt levels: should this be considered in the painful TKR patient?

A 63-year-old woman was referred to the specialised knee revision clinic with ongoing knee pain after total knee replacement. She incidentally had cobalt and chromium levels measured. These were seen to be elevated. Comprehensive assessment and investigation did not identify any other source of cobalt or chromium. Aseptic loosening of the knee was diagnosed, and the knee was revised. At the time of surgery, the tissue was seen to be darkened consistent with metallosis. Multiple samples excluded infection on extended cultures. Aspirated fluid showed that periprosthetic fluid had elevated cobalt levels. The knee was successfully revised with good symptomatic outcome and significantly, over the course of several months post-revision, the cobalt and chromium levels returned to normal.

The contribution of the histopathological examination to the diagnosis of adverse local tissue reactions in arthroplasty

The histopathological examination of the periprosthetic soft tissue and bone has contributed to the identification and description of the morphological features of adverse local tissue reactions (ALTR)/adverse reactions to metallic debris (ARMD). The need of a uniform vocabulary for all disciplines involved in the diagnosis and management of ALTR/ARMD and of clarification of the parameters used in the semi-quantitative scoring systems for their classification has been considered a pre-requisite for a meaningful interdisciplinary evaluation.

This review of key terms used for ALTR/ARMD has resulted in the following outcomes: (a) pseudotumor is a descriptive term for ALTR/ARMD, classifiable in two main types according to its cellular composition defining its clinical course; (b) the substitution of the term metallosis with presence of metallic wear debris, since it cannot be used as a category of implant failure or histological diagnosis; (c) the term aseptic lymphocytic-dominated vasculitis- associated lesion (ALVAL) should be replaced due to the absence of a vasculitis with ALLTR/ALRMD for lymphocytic-predominant and AMLTR/AMRMD for macrophage-predominant reaction.

This review of the histopathological classifications of ALTR/ARMD has resulted in the following outcomes: (a) distinction between cell death and tissue necrosis; (b) the association of corrosion metallic debris with adverse local lymphocytic reaction and tissue necrosis; (c) the importance of cell and particle debris for the viscosity and density of the lubricating synovial fluid; (d) a consensus classification of lymphocytic infiltrate in soft tissue and bone marrow; (e) evaluation of the macrophage infiltrate in soft tissues and bone marrow; (f) classification of macrophage induced osteolysis/aseptic loosening as a delayed type of ALTR/ARMD; (g) macrophage motility and migration as possible driving factor for osteolysis; (h) usefulness of the histopathological examination for the natural history of the adverse reactions, radiological correlation, post-marketing surveillance, and implant registries.

The review of key terms used for the description and histopathological classification of ALTR/ARMD has resulted in a comprehensive, new standard for all disciplines involved in their diagnosis, clinical management, and long-term clinical follow-up.

Cite this article: EFORT Open Rev 2021;6:399-419. DOI: 10.1302/2058-5241.6.210013

Favourable clinical outcomes following cemented arthroplasty after metal-on-metal total hip replacement: a retrospective study with a mean follow-up of 10 years

BACKGROUND

Given the unexpected high rate of failure following metal-on-metal total hip replacement (MoM-THR), it is expected that more MoM-THR patients will experience revision. The long-term outcomes regarding the primary MoM-THR revised to cemented THR (CTHR) remain controversial. The purpose of this retrospective review was to evaluate the long-term outcomes of patients who underwent conversion from MoM-THR to CTHR.

METHODS

A total of 220 patients (220 hips) who underwent a conversion of primary MoM-THR to CTHR from March 2006 to October 2016 were retrospectively reviewed. The primary outcomes were the functional outcomes assessed using the Harris hip scores (HHS) and major radiographic outcomes. Follow-ups occurred at 3 months, 6 months, 1 year, 2 years, and then every two years after revision.

RESULTS

Mean follow-up was 10.1 years (5-13 years). Distinct improvements were detected in the mean HHS between the preoperative and last follow-up analysis (62.35[±8.49] vs. 84.70[±14.68], respectively, p < 0.001). The key orthopaedic complication rate was 18.2% (27/148). Seven (4.7%) cases experienced a CTHR failure at a mean of 3.4 (±1.2) years after revision MoM-THR, mostly attributed to recurrent dislocation.

CONCLUSION

CTHR might yield an acceptable functional score and a low rate of the key orthopaedic complications.

Wear debris released by hip prosthesis analysed by microcomputed tomography

Total hip arthroplasty uses commercial devices that combine different types of biomaterials. Among them, metals, ceramics and metal oxides can be used either in the prosthesis itself or in the cement used to anchor them in the bone. Over time, all of these materials can wear out and release particles that accumulate in the periprosthetic tissues or can migrate away. We used histology blocks from 15 patients (5 titanium metallosis, 5 alumina prostheses, 5 with altered methacrylic cement) to perform a microCT study and compare it with conventional histology data. An EDS-SEM analysis was done to characterise the atomic nature of the materials involved. A morphometric analysis was also performed in 3D to count the particles and assess their density and size. The metallic particles appeared to be the largest and the ceramic particles the finest. However, microCT could not reveal the wear particles of radiolucent biomaterials such as polyethylene and the very fine zirconia particles from cement fragmentation. MicroCT analysis can reveal the extent of the accumulation of these debris in the periprosthetic tissues. LAYOUT DESCRIPTION: Hip prostheses progressively degrade in the body by releasing wear debris. They accumulate in the periprosthetic tissues. Microcomputed tomography was used to image three types of radio-opaque wear debris: metal, ceramic and zirconia used in the bone cements.

Metasul vs Cerasul bearings: a prospective, randomized study at a mean eighteen years

BACKGROUND

The aims of our study were to compare the clinical, radiographic outcomes and survivals between second-generation metal-on-metal (Metasul) and ceramic-on-ceramic (Cerasul) bearings at a very long-term follow-up.

METHODS

A prospective, randomized study was originally performed on a consecutive series of 250 cementless, 28-mm head and primary total hip arthroplasties between 1999 and 2002. For each bearing (Metasul or Cerasul), 125 THAs were initially included. All cases were evaluated both clinically and radiographically, and survival was assessed, considering revisions for aseptic loosening or for any reason as the end points for failure.

RESULTS

At a mean 18-year follow-up, clinical and radiographic outcomes were similar. Harris Hip Score increased 30% in the Metasul group and 32% in the Cerasul group (p = 0.6). Survival free of aseptic loosening was higher for Cerasul (100%), than for Metasul (94% [CI 88-99.9]) (p = 0.04). Survival free of any revision was 91% ([CI 84-98%]) for Cerasul and 91% ([CI 84-98%]) for Metasul. Fractures of Cerasul insert occurred in four cases (3%) at a mean 12.5 ± 3.3 years (range, 6 to 17 years).

CONCLUSION

At 18 years, Cerasul demonstrated higher survivorship than Metasul considering aseptic loosening as an end point. However, Cerasul liners had high rate of fracture because of its sandwich design (thin ceramic liner into polyethylene). These implants are no more available on the market.

Third generation delta ceramic-on-ceramic bearing for total hip arthroplasty at mid-term follow-up

Purpose

to evaluate the results of Delta ceramic-on-ceramic (CoC) for total-hip-arthroplasty (THA).

Methods

261 THA using Delta-CoC, retrospectively analyzed. A 36 mm head was used in 189 cases and a 32/40 mm in the others. The series have been compared to a group of 89 THA with Forte-CoC.

Results

The Harris-Hip-Score improved from 49.1 ± 14.3 to 92.0 ± 8.9 (P < 0.001). In the Delta group there were one ceramic fracture and 2 dislocations. Two hips underwent revision. There were one revision in the Forte group for instability and one squeaking hip.

Conclusions

The new ceramic bearings provides a safe bearing for THA, with rare complications.

Bone loss around implants-is it metallosis?

Most would agree that the etiology of dental implant failure is related to oral biofilm. At present one group of scientists and clinicians feel that biofilm is solely responsible for bone loss around the devices. However, there is strong evidence that particles and ions of titanium released into the surrounding tissues by the action of biofilm and/or mechanical forces, a process termed metallosis, can be responsible for bone loss around some dental implants. These findings are reinforced by similar responses found around failed metal on metal joint prostheses. Both possible etiologies are discussed in detail in this commentary.

Multivariate use of MRI biomarkers to classify histologically confirmed necrosis in symptomatic total hip arthroplasty

The failure of total hip arthroplasty (THA) is commonly associated with the necrosis of the periprosthetic tissue. To date, there is no established method to noninvasively quantify the progression of such necrosis. Magnetic resonance imaging (MRI) of soft tissues near implants has undergone a recent renaissance due to the development of multispectral metal-artifact reduction techniques. Advanced analysis of multispectral MRI has been shown capable of detecting small magnetism effects of metallic debris in periprosthetic tissue. The purpose of this study is to demonstrate the diagnostic utility of these MRI-based tissue-magnetism signatures. Together with morphological MRI metrics, such as synovial volume and thickness, these measurements are utilized as biomarkers to noninvasively detect soft-tissue necrosis in symptomatic THA patients ( N = 78 ). All subjects underwent an advanced MRI scan before revision surgery and tissue biopsies utilized for necrosis grading. Statistical analyses demonstrated a weak, but significant positive correlation (P = .04) between MRI magnetism signatures and necrosis scores, while indicating no meaningful association between the latter and serum cobalt and chromium ion levels. Receiver-operating characteristic (ROC) analyses were then performed based on uni- and multivariate logistic regression models utilizing the measured MRI biomarkers as predictors of severe necrosis. The area under the curve of the ROC plots for MRI biomarkers as combined predictors were found to be 0.70 and 0.84 for cross-validation and precision-recall tests, respectively.

Severe metallosis-related osteolysis as a cause of failure after total knee replacement

BACKGROUND

Metallosis is a syndrome of metal-induced synovitis caused by friction between two metal surfaces. In contrast to the hip joint after resurfacing arthroplasty or metal-on-metal (MoM) total hip replacement, metallosis of the knee is extremely rare.

MATERIALS

We describe 4 patients who underwent revision total knee replacement because of disabling pain and implant loosening after a mean time of 21 (range: 13-30) years of knee replacement surgery. They were all females with a mean age of 79 (range: 75-82) years. Septic loosening was excluded through microbiological examination and synovial fluid analysis.

RESULTS

Direct metal-on-metal contact at the tibiofemoral interface was confirmed intraoperatively in all cases. All knees showed severe metallosis with advanced osteolysis and pseudotumor formation. In one knee there was a complete fracture of the tibial tray. All patients had a one-stage revision surgery with implant removal, profound synovectomy and implantation of a constrained modular revision knee system. Long modular stems with offset adapters, wedges and/or blocks were used in all cases.

CONCLUSION

Metallosis-associated osteolysis should be suspected in cases with radiologically evident polyethylene wear after knee replacement. Recognizing that revision arthroplasty is very technically demanding in such cases, surgeons should have a back-up with modular revision components and a ready access to reconstructive options at this revision setting.

Revision total hip arthroplasty for metal-on-metal failure

Metal-on-metal (MoM) arthroplasty systems became popular in the early-2000s due to presumed advantages of improved wear characteristics and superior stability. However, subsequent reports of abnormal soft-tissue reactions to MoM implants and national registry data reporting high failure rates raised concerns. Early outcomes of revision total hip arthroplasty (THA) for adverse reaction to metal debris (ARMD) were poor, leading to development of surveillance programs and a trend towards early revision surgery. Patients with MoM arthroplasties require surveillance, comprehensive history and physical examination, imaging with ultrasound or magnetic resonance imaging (MRI), and laboratory evaluation including metal ion levels. Operative strategies for revision THA vary from exchange of modular components to extensive debridement and reconstruction with revision components. Surgeons should be aware of the increased risks of dislocation and infection following revision THA for ARMD. However, there is growing evidence that early revision surgery prior to extensive soft tissue destruction results in improved outcomes and decreased re-operation rates. It is estimated that >1 million MoM articulations have been implanted, with a large proportion still in situ. It is imperative to understand the aetiology, presentation, and management strategies for these patients to optimise their clinical outcomes.

Evaluation of Aerosol Electrospray Analysis of Metal-on-Metal Wear Particles from Simulated Total Joint Replacement

Wear is a common cause for aseptic loosening in artificial joints. The purpose of this study was to develop an automated diagnostical method for identification of the number and size distribution of wear debris. For this purpose, metal debris samples were extracted from a hip simulator and then analyzed by the electrospray method combined with a differential mobility analyzer, allowing particle detection ranging from several nanometers up to 1 µm. Wear particles were identified with a characteristic peak at 15 nm. The electrospray setup was successfully used and validated for the first time to characterize wear debris from simulated total joint replacement. The advantages of this diagnostic method are its time- and financial efficiency and its suitability for testing of different materials.

Systematic review of the clinical effectiveness for long-term follow-up of total hip arthroplasty

Objectives: Total hip arthroplasty (THA) is highly successful but national registries indicate that average age has lowered and that younger patients are at higher risk of revision. Long-term follow-up of THA was historically recommended to identify aseptically failing THA, minimising the risks associated with extensive changes, but follow-up services are now in decline. A systematic review was conducted to search for evidence of the clinical or cost-effectiveness of hip arthroplasty surveillance.

Methods: The study was registered with PROSPERO International Prospective Register of Systematic Reviews and conducted according to PRISMA guidelines; databases included MEDLINE and Embase, and all studies were quality assessed. Original studies (2005 to 2017) reporting follow-up of adults with THA in situ >5 years were included. Researchers extracted quantitative and qualitative data from each study.

Results: For eligibility, 4,137 studies were screened: 114 studies were included in the final analysis, representing 22 countries worldwide. Data extracted included study endpoint, patient detail, loss to follow-up, revisions, scores and radiographic analysis. Six themes were derived from inductive content analysis of text: support for long-term follow-up, subgroups requiring follow-up, effect of materials/techniques on THA survival, effect of design, indicators for revision, review process. Main findings—follow-up was specifically recommended to monitor change (eg asymptomatic loosening), when outcomes of joint construct are unknown, and for specific patient subgroups. Outcome scores alone are not enough, and radiographic review should be included.

Conclusion: There were no studies directly evaluating the clinical effectiveness of the long-term follow-up of THA but expert opinions from a range of international authors advocated its use for defined subgroups to provide patient-centred care. In the absence of higher level evidence, these opinions, in conjunction with emerging outputs from the national joint registries, should be used to inform services for long-term follow-up of THA.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/lAKW3hQGyJQ

Transition from metal-DTH resistance to susceptibility is facilitated by NLRP3 inflammasome signaling induced Th17 reactivity: Implications for orthopedic implants

Metal hypersensitivity has been recognized as an adverse biologic reaction that can compromise total joint arthroplasty (TJA) performance. However, the etiology of metal hypersensitivity responses in TJAs remains unclear. Metal implant debris is known to act as a danger signal that drives NLRP3 inflammasome activation. It remains unknown if implant debris induced inflammasome activation regulates T cell lineage in TJA metal hypersensitivity responses. In this study, we show both in vivo and in vitro that the pathogenesis of metal hypersensitivity responses to implant debris are largely dependent on activation of the inflammasome/caspase-1 pathway and subsequent production of IL-17A/F by CD4+ T cells. Inhibiting either the inflammasome pathway or IL-17A bioactivity in vivo and in vitro (in vivo using NLRP3 and Caspase-1 deficient mice or in vitro using blocking agents such as Capase-1 inhibitor, IL-1Ra and anti-IL-17A), significantly (p<0.05) mitigated metal-DTH paw inflammation as well as lymphocyte cytokine (IFN-γ and IL-17) and proliferation responses in metal-sensitized mice and primary human PBMCs. This study provides mechanistic insight into how in vivo exposure to orthopedic implant debris, and metals in general, elicits NLRP3 inflammasome activation that mediates the generation of IL-17A/F producing CD4+ T cells, leading to metal-delayed type hypersensitivity reactions.

Unique Migration of a Septic Loosened Metal-on-metalCementless Total Hip Arthroplasty: A Case Report and Literature Review

Introduction

Total hip arthroplasty (THA) is one of the most successful and cost- effective surgical procedures developed during the last century. Although, chronic infection accompanied with granulomatous allergic reaction from Cobalt (Co),Chromium (Cr) debris after metal-on-metal (MoM) THA implantation can cause severe osteolysis, with subsequent loosening and migration of the implants. There are many cases with intrapelvic migration of these implants, however to best of our knowledge, there is no report of a complete horizontal migration (on frontal plane) of the whole THA prosthesis without disassembly accompanied with severe bone destruction.

Case Report

A 52-year-old female patient was admitted to the authors' department with inability to weight bear. Because of bilateral developmental hip dysplasia (Type II, Hartofilakidis classification) she underwent THA bilaterally at another institution about 20 years ago. On admission, the initial plain roentgenogram of the hip was impressive, disclosing sclerotic, osteolytic lesions, associated with perforation of the lateral and medial cortices of the proximal femur, and migration to 90-degree horizontal position on the frontal plane of the whole prosthesis. Based on the preoperative planning, the implants were removed through a small medial longitudinal approach accompanied with lateral debridement. The patient denied revision surgery and the final result was a resection arthroplasty.

Conclusion

THA is one of the most clinically successful surgical procedures, although inappropriate patient or implant selection for primary hip arthroplasty can lead to the necessity of complex revision surgery after late-diagnosed postoperative complications such as infection, loosening, and migration of the prosthesis. A well-designed preoperative plan is mandatory when handling such cases. Clinicians when faced with THA migration, rare or common, should definitely rule out the infection. Adverse reactions to metal debris (ARMD) can also lead to significant displacement of a hip prosthesis, although coexistence of metallosis and infection cannot be excluded in advance.

Recent updates for biomaterials used in total hip arthroplasty

Background

Total hip arthroplasty (THA) is probably one of the most successful surgical interventions performed in medicine. Through the revolution of hip arthroplasty by principles of low friction arthroplasty was introduced by Sir John Charnley in 1960s. Thereafter, new bearing materials, fixation methods, and new designs has been improved. The main concern regarding failure of THA has been the biological response to particulate polyethylene debris generated by conventional metal on polyethylene bearing surfaces leading to osteolysis and aseptic loosening of the prosthesis. To resolve these problems, the materials of the modern THA were developed since then.

Methods

A literature search strategy was conducted using various search terms in PUBMED. The highest quality articles that met the inclusion criteria and best answered the topics of focus of this review were selected. Key search terms included ‘total hip arthroplasty’, ‘biomaterials’, ‘stainless steel’, ‘cobalt-chromium’, ‘titanium’, ‘polyethylene’, and ‘ceramic’.

Results

The initial search retrieved 6921 articles. Thirty-two articles were selected and used in the review.

Conclusion

This article introduces biomaterials used in THA and discusses various bearing materials in currentclinical use in THA as well as the newer biomaterials which may even further decrease wear and improve THA survivorship.

Particulate and ion forms of cobalt-chromium challenged preosteoblasts promote osteoclastogenesis and osteolysis in a murine model of prosthesis failure

This study investigated the interactive behavior of the particulate and ion forms of cobalt-chromium (Co-Cr) alloy challenged preosteoblasts during the process of prosthetic implant loosening. Preosteoblasts were challenged with Co-Cr particles or Co(II) ions for 72 h, followed by the proliferation and PCR assays. For in vivo test, a titanium pin was implanted into proximal tibia of SCID mice to mimic knee replacement. Co-Cr particles or Co(II) ion challenged preosteoblasts (5 × 10⁵ ) were intra-articularly injected into the implanted knee. The animals were sacrificed 5 weeks post-op, and the prosthetic knees were harvested for biomechanical pin-pullout testing, histological evaluations, and microCT assessment. In vitro study suggested that Co-Cr particles and Co(II) ions significantly suppressed the proliferation of preosteoblasts in a dose-dependent manner. RT-PCR data on the challenged cells indicated overexpression of receptor activator of nuclear factor kappa-B ligand (RANKL) and inhibited osteoprotegerin (OPG) gene expression. Introduction of the differently challenged preosteoblasts to the pin-implant mouse model resulted in reduced implant interfacial shear strength, thicker peri-implant soft-tissue formation, more TRAP+ cells, lower bone mineral density, and bone volume fraction. In conclusion, both Co-Cr particles and Co(II) ions interfered with the growth, maturation, and functions of preosteoblasts, and provides evidence that the metal ions as well play an important role in effecting preosteoblasts in the pathogenesis of aseptic loosening. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 187-194, 2019.

Modular Stems: Advantages and Current Role in Primary Total Hip Arthroplasty

Using modular femoral stems in total hip arthroplasty enables surgeons to make fine adjustments to individual joints and offers intraoperative flexibility. The concept of modularity has been developed in numerous shapes, resulting in a vast range of options. Among them, the greatest achievement has been made for prostheses with modular proximal sleeves. The use of these implants has resulted in excellent mid- to long-term results in a number of cases. Although the use of tapered stems with a broaching technique is gaining popularity in straightforward primary surgeries, modular femoral implants are still associated with a number of potential challenges (e.g., developmental dysplasia of the hip, infection sequelae, and skeletal dysplasia). Based on published results, it is advisable to consider it as an option for complicated cases where the proximal femur is severely deformed.

Lumbosacral Transitional Vertebra-Related Low Back Pain: Resolving the Controversy

Study Design

Case control study.

Purpose

The association of lumbosacral transitional vertebra (LSTV) with low back pain (LBP) is controversial, as is the role of occupational physical activity and radiological spinal abnormalities suggestive of other spinal disorders (OSDs) such as spinal degeneration and instability. This study aimed to determine if any association of LSTV with LBP exists. If so, the association of the level of physical activity and presence of OSD with LSTV-related LBP was determined.

Overview of Literature

The cause of LBP has been linked to proximal level disc degeneration, arthritic pseudoarticulation between LSTV and the sacral ala, facet joint degeneration, and nerve root compression due to a broadened transverse process. LSTV associated with LBP is present among individuals who are involved in high-level physical activity, including military recruits and athletes.

Methods

This was an unmatched study comprising 372 cases and 224 controls consecutively recruited with clinical and radiographic documentation. The relationship between LSTV and LBP was analyzed, and the effects of LSTV and OSD on this relationship were also assessed and statistically controlled.

Results

The presence of LSTV (p =0.039) was significantly associated with LBP, and the presence of OSD was associated with LTSV-related LBP, after statistically controlling for the level of physical activity (p =0.024). The level of physical activity was not associated with LBP. Demographic analysis revealed female predominance with an advanced age (>45 years) among those with LSTV-related LBP who have OSD.

Conclusions

The presence of LSTV was associated with an increased prevalence of LBP. This association was probably due to the confounding effect of OSD. The level of occupational physical activity was not associated with LSTV-related LBP. We speculate that advanced age and female sex caused the spurious association of LSTV with LBP in our study, rendering LSTV-related LBP controversial in published literature.

Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene

BACKGROUND

Wear of the bearing surface is a critical element in determining the longevity of a total hip arthroplasty (THA). Over the past decade, concerns related to modern metal-on-metal (MoM) bearings and corrosion at the femoral head-neck interface have influenced surgeon selection of bearing surfaces. The purpose of this study is to analyze trends in THA bearing surface selection from 2007 through 2014 using a large national database.

METHODS

The Nationwide Inpatient Sample database was used to extract bearing surface data from patients who underwent a primary THA between 2007 and 2014. Patients were grouped by bearing surface type: metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), MoM, and ceramic-on-ceramic (CoC) bearings. Descriptive statistics were employed to describe trends. Univariate and multivariate analyses were performed to identify differences between bearing surface groups.

RESULTS

During the study period, 2,460,640 THA discharges were identified, of which 1,059,825 (43.1%) had bearing surface data. A total of 496,713 (46.9%) MoP, 307,907 (29.1%) CoP, 210,381 (19.9%) MoM, and 44,823 (4.2%) CoC cases were identified. MoM utilization peaked in 2008 representing 40.1% of THAs implanted that year and steadily declined to 4.0% in 2014. From 2007 to 2014, the use of CoP bearing surfaces increased from 11.1% of cases in 2007 to 50.8% of cases in 2014. In 2014, CoP utilization surpassed MoP which represented 42.1% of bearing surfaces that year.

CONCLUSION

During the study period, MoM bearing surfaces decreased precipitously, while CoP surpassed MoP as the most popular bearing surface used in a THA.

Comparison of Postoperative Complications Following Metal-on-Metal Total Hip Arthroplasty With Other Hip Bearings in Medicare Population

BACKGROUND

The use of metal-on-metal (MoM) hip bearings has declined in the recent years due to strong evidence of their high complication rates and early failure. Hip implants with highly cross-linked polyethylene liners and ceramic bearings have become the modern implants of choice. We sought to determine if MoM implants are associated with higher complication and revision rates when compared to other hip bearings in the Medicare population.

METHODS

We retrospectively reviewed a Medicare database (2005-2011) for patients who underwent a primary total hip arthroplasty with a MoM, metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), or ceramic-on-ceramic (CoC) implant (minimum 2 years of follow-up). Patient comorbidities and medical/surgical complication rates were analyzed at various time points postoperatively.

RESULTS

We identified 288,118 patients, including 81,520 patients with a MoM implant, 162,881 with MoP, 33,819 with CoP, and 9898 with CoC implant. Surgical complication rates were higher for MoM implants including infection, osteolysis/polywear, mechanical complications, and need for hip irrigation and debridement. Overall revision rates were significantly higher for MoM implants (5.28%) compared to MoP (4.28%, odds ratio [OR] 1.26, P < .001) and CoP (3.52%, OR 1.55, P < .001) but only by one to two percent. MoM revision rates were similar to CoC implants (4.94%, OR 1.00, P = .096).

CONCLUSIONS

MoM implants were associated with higher revision rates (5.28%) compared to MoP (4.28%) and CoP (3.52%) implants in the Medicare population. Both complication and revision rates were comparable to CoC implants.

Changes in serum chromium levels over 12 years after Metasul metal-on-metal total hip arthroplasty

We reported the longitudinal changes in serum chromium levels over a minimum of 7 years postoperatively in five men and 25 women with a mean age of 60.3 years after primary unilateral total hip arthroplasty with a Metasul metal-on-metal articulation. The serum chromium ion level showed little variation (0.6-1.2 μg/L) from 2 to 12 years postoperatively in 16/30 patients after unilateral primary Metasul metal-on-metal total hip arthroplasty. On the other hand, the serum chromium level stayed high or showed gradual elevation in 8/30 patients, even though they had well-fixed and well-functioning prostheses.

[Mid-term effectiveness of large-head metal-on-metal total hip arthroplasty]

Objective

To explore the mid-term effectiveness of large-head metal-on-metal total hip arthroplasty (THA).

Methods

A retrospective analysis was made on the clinical date of 40 patients (43 hips) who were treated with the large-head metal-on-metal THA between April 2009 and June 2010. There were 18 males (20 hips) and 22 females (23 hips) with an average age of 55.1 years (range, 20-85 years). Unilateral hip was involved in 37 cases and bilateral hips in 3 cases. The disease causes included osteonecrosis of the femoral head in 14 cases (15 hips), osteoarthritis in 6 cases (7 hips), rheumatoid arthritis in 4 cases (4 hips), femoral neck fracture in 4 cases (4 hips), and developmental dysplasia of the hip in 12 cases (13 hips). Before operation, the Harris score and University of California Los Angeles (UCLA) score were 38.51±5.62 and 4.21±1.43, respectively. The visual analogue scale (VAS) score was 6.78±0.95.

Results

All patients were followed up 6.7-8.3 years (mean 7.5 years). All incisions healed primarily and no neurovascular injury, infection, and hip dislocation occurred. At last follow-up, the Harris score and UCLA score were 93.33±3.21 and 7.32±1.45, respectively, showing significant differences when compared with preoperative scores ( t=51.753, P=0.000; t=23.232, P=0.000). The thigh pain occurred in 3 cases (3 hips) in whom the inflammatory pseudotumor of soft tissues was found in 1 case (1 hip). Postoperative X-ray films showed that the acetabular abduction angle and anteversion angle were (46.5±3.2)° and (14.8±3.6) °, respectively. The initial stability of femoral stem prosthesis was excellent in 39 hips and good in 4 hips according to Mulliken standard. Osteolysis occurred in 2 hips and revision was performed in 1 hip of secondary loosening of prosthesis. The rest patients had no prosthesis loosening or sinking.

Conclusion

The mid-term effectiveness of large-head mental-on-mental THA in treatment of the terminal diseases of hips are good.

3rd generation ceramic-on-ceramic cementless total hip arthroplasty: a minimum 10-year follow-up study

INTRODUCTION

3^rd generation ceramic bearings were introduced in total hip arthroplasty (THA) with the potential to have better mechanical strength and wear properties than their predecessors. At present, there are few studies looking at the long-term results of this latest generation of ceramic bearings. The purpose of our study was to investigate the long-term clinical and radiographic results of 3^rd generation ceramic-on-ceramic THA and the incidence of ceramic specific complications such as squeaking and bearing surface fracture.

METHODS

The database of the senior author (J.D.W.) was reviewed. A total of 126 hip replacements performed in 108 patients (average age 39.6 years) with an average follow-up of 12.1 years (10-16 years) was identified. Clinical notes and plain radiographs were reviewed. To measure function, patients were contacted and an Oxford Hip Questionnaire was completed. Patients were also directly questioned about the presence of squeaking or any other sounds from the hip. Radiographs were evaluated for signs of wear, osteolysis, loosening and heterotopic ossification. The abduction angle of the acetabular component was measured.

RESULTS

The average Oxford Hip Score was 39.8 out of 48. Survivorship at 10 years was 94.6% (95% CI) with revision for any cause as the endpoint. There was 1 femoral head fracture, no osteolysis, no squeaking and no detectable wear.

CONCLUSIONS

The good clinical and radiographic results for this series of patients are similar to other recent long-term studies looking at 3^rd generation ceramic-on-ceramic THA. The results compare favourably with other bearing surfaces. The lack of osteolysis associated with this articulation is encouraging and may also make it a good choice for younger patients requiring total hip replacement.

Frank Stinchfield Award: Identification of the At-risk Genotype for Development of Pseudotumors Around Metal-on-metal THAs

BACKGROUND

Once touted as the future of hip arthroplasty, metal-on-metal (MoM) bearing surfaces have fallen sharply from favor with the emergence of a strong body of evidence demonstrating unacceptably high premature implant failure rates. The previously unpredictable development of adverse local tissue reactions (ALTRs) has been a substantive contributor to this. Although the underlying pathophysiology of these so-called "pseudotumors" is now well understood, the fundamental predisposing patient risk factors have remained elusive.

QUESTIONS/PURPOSES

The aim of this research, as a clinical-genotype correlation analysis, was to identify specific alleles (genes) associated with the development of ALTRs in patients with in situ MoM THAs.

METHODS

A case-control study of patients who received a large-head, primary MoM THA between 2005 and 2008 was performed with a minimum followup of 5 years. Twenty-six patients who had undergone revision of a primary MoM THA secondary to symptomatic ALTRs were recruited. The mean timeframe from primary MoM THA to symptomatic revision was 5.5 years (range, 1-10 years). Twenty-eight control subjects were randomly selected asymptomatic patients with no evidence of ALTRs on protocol-specific screening. Baseline demographics and high-resolution genotype (human leukocyte antigen [HLA] Class II) were collected for all patients. Cohorts were similar with respect to age at the time of primary MoM THA (mean, 54.8 versus 54.9 years, p = 0.95) and serum cobalt (mean, 5.5 versus 8.5 μg/L, p = 0.09) and chromium concentrations (mean, 2.9 versus 4.2 μg/L, p = 0.27). The association between genotype and revision surgery secondary to ALTRs was determined with gender as a covariate.

RESULTS

The prevalence of the risk genotype was 30% (16 of 54) among the entire cohort. Adjusting for sex, the odds of revision were 6.1 times greater among patients with the risk genotype present than among patients without (95% confidence interval [CI], 1.5-25.4; p = 0.01). Among females, the specificity of the risk genotype was 1.0 (95% CIexact, 0.5-1.0; pexact = 0.03), and for males, it was 0.8 (95% CIexact, 0.6-0.9; pexact < 0.01).

CONCLUSIONS

The findings of this study suggest that, among patients with a primary MoM THA, allelic variation within the HLA Class II loci may be a strong, independent risk factor associated with the need for subsequent revision surgery secondary to pseudotumor formation.

CLINICAL RELEVANCE

Given the hypothesis-generating nature of this novel undertaking, confirmatory prospective clinical studies are required to further elucidate this correlation and to explore the clinical utility of targeted genetic screening in this specific population. This research may, however, represent a key missing piece in the puzzle that is metal ion-induced pseudotumor formation.

Current Pathologic Scoring Systems for Metal-on-metal THA Revisions are not Reproducible

BACKGROUND

The aseptic lymphocyte vasculitis-associated lesion (ALVAL) score and the modified Oxford ALVAL score are frequently used scoring methods to evaluate the morphologic features of periprosthetic tissues around metal-on-metal (MoM) hip implants. Except for the initial studies of these two morphology scoring methods, to our knowledge, no other studies have reported on intraclass correlation coefficient (ICC) values for interobserver reliability of these scoring methods.

QUESTIONS/PURPOSES

Are the ALVAL and Oxford ALVAL scores reproducible?

METHODS

The periprosthetic tissue of 37 revisions of 36 patients with failed MoM THAs were independently scored by three experienced pathologists using ALVAL and Oxford ALVAL scoring methods. All patients were included who underwent revision surgery in our hospital until January 2013, with a large-head MoM prosthesis and also met the criteria: blood serum cobalt levels, available MRI scan, and intraarticular cobalt levels. The population included 26 patients with pseudotumors diagnosed by two radiologists using the method described by Matthies et al. The ALVAL describes morphologic features of the synovial lining, tissue organization, and inflammatory cell infiltrate in periprosthetic tissues. The Oxford-ALVAL score uses a semiquantitative measure of the immune response which should be easier to score.

RESULTS

The ALVAL score showed an ICC of 0.38 (95% CI, 0.18-0.58) (fair) for the sum score and this improved up to 0.50 (95% CI, 0.31-0.68) (moderate) using the modified Oxford ALVAL score. The individual parameters of the ALVAL score showed an ICC for the scoring of inflammatory infiltrate of 0.37 (95% CI, 0.17-0.57), an ICC of 0.32 (95% CI, 0.12-0.53) for the scoring of tissue organization, and an ICC of 0.14 (95% CI, -0.04 to 0.34) for synovial lining.

CONCLUSIONS

Scoring morphologic features of MoM tissue is not reproducible using the ALVAL score or the Oxford ALVAL score. This may reflect heterogeneous morphologic features in tumor tissue and between different tumor tissue samples that cannot be reliably quantified by pathologists using the parameters of these two scoring methods. An alternative, simplified scoring system should be developed to improve the interrater agreement.

LEVEL OF EVIDENCE

Level III, diagnostic study.

3rd generation ceramic-on-ceramic cementless total hip arthroplasty: a minimum 10-year follow-up study

INTRODUCTION

3rd generation ceramic bearings were introduced in total hip arthroplasty (THA) with the potential to have better mechanical strength and wear properties than their predecessors. At present, there are few studies looking at the long-term results of this latest generation of ceramic bearings.The purpose of our study was to investigate the long-term clinical and radiographic results of 3rd generation ceramic-on-ceramic THA and the incidence of ceramic specific complications such as squeaking and bearing surface fracture.

METHODS

The database of the senior author (J.D.W.) was reviewed. A total of 126 hip replacements performed in 108 patients (average age 39.6 years) with an average follow-up of 12.1 years (10-16 years) was identified. Clinical notes and plain radiographs were reviewed. To measure function, patients were contacted and an Oxford Hip Questionnaire was completed. Patients were also directly questioned about the presence of squeaking or any other sounds from the hip. Radiographs were evaluated for signs of wear, osteolysis, loosening and heterotopic ossification. The abduction angle of the acetabular component was measured.

RESULTS

The average Oxford Hip Score was 39.8 out of 48. Survivorship at 10 years was 94.6% (95% CI) with revision for any cause as the endpoint. There was 1 femoral head fracture, no osteolysis, no squeaking and no detectable wear.

CONCLUSIONS

The good clinical and radiographic results for this series of patients are similar to other recent long-term studies looking at 3rd generation ceramic-on-ceramic THA. The results compare favourably with other bearing surfaces. The lack of osteolysis associated with this articulation is encouraging and may also make it a good choice for younger patients requiring total hip replacement.

Clinical Characteristics of Abutment Teeth with Gingival Discoloration

PURPOSE

The grey-bluish discoloration of gingiva (known as "amalgam tattoo") does not appear only in the presence of amalgam restorations. It may also be seen in cases of teeth restored with cast dowels and porcelain-fused-to-metal (PFM) restorations. The aim of this article was to determine the clinical characteristics of abutment teeth with gingival discoloration.

MATERIALS AND METHODS

This research was conducted on 25 patients referred for cast dowel and PFM restorations. These restorations were manufactured from Ni-Cr alloys. Ninety days after cementing the fixed prosthodontic restorations, the abutment teeth (n = 61) were divided into a group with gingival discoloration (GD) (n = 25) and without gingival discoloration (NGD) (n = 36). The control group (CG) comprised the contralateral teeth (n = 61). Plaque index, gingival index, clinical attachment level, and probing depth were assessed before fabrication and also 90 days after cementation of the PFM restorations.

RESULTS

The gingival index, clinical attachment level, and probing depths of the abutment teeth that had GD were statistically higher before restoration, in comparison with the abutment teeth in the NGD and control groups. Ninety days after cementation, the abutment teeth with GD had significantly lower gingival indexes and probing depths, compared to the abutment teeth in the NGD group. Both abutment teeth groups (GD and NGD) had significantly higher values of clinical attachment levels when compared to the control group. There were no statistically significant differences in plaque index values between the study groups.

CONCLUSIONS

The results of this study indicated that impairment of periodontal status of abutment teeth seemed to be related to the presence of gingival discolorations. Therefore, fabrication of fixed prosthodontic restorations requires careful planning and abutment teeth preparation to minimize the occurrence of gingival discolorations.

CLINICAL RELEVANCE

With careful preparation of abutment teeth for cast dowels and crown restorations it may be possible to decrease the frequency of gingival discolorations adjacent to abutment teeth.

Pseudotumour formation and subsequent resolution in metal-on-metal total hip arthroplasty following revision: Instructional review and an illustrative case report with revision using a dual mobility design

The use of large-diameter metal-on-metal (MoM) components in total hip arthroplasty (THA) is associated with an increased risk of early failure due to adverse local tissue reaction to metal debris (ARMD) in response to the release of metal ions from the bearing couple and/or head-neck taper corrosion. The aim of this paper was to present a review of the incidence and natural history of ARMD and the forms of treatment, with a focus on the need for and extent of resection or debulking of the pseudotumour. An illustrative case report is presented of a patient with an intra-pelvic pseudotumour associated with a large diameter MoM THA, which was treated successfully with revision of the bearing surface to a dual mobility couple and retention of the well-fixed acetabular and femoral components. The pseudotumour was left in situ Resolution of the intra-pelvic mass and normalisation of metal ion levels was observed seven months post-operatively. Cite this article: Bone Joint J 2016;98-B:736-40.

Metallosis: A Complication in the Guided Growing Rod System Used in Treatment of Scoliosis

Soft tissue reaction following metallic debris formation with the use of guided growing rod system has not been previously reported in human. The purpose of this study is to report complications caused by metallosis in a guided growing rod system. A 9-year-old female patient, who underwent treatment for the progressive idiopathic scoliosis (with Cobb's angle of 71°) with the guided growing rod system. Her Cobb's angle was corrected to 13° with the index surgery. During the 5 years postoperative period, she manifested recurrent episodes of skin irritation and progressive worsening of lateral curvature of the spine to an angle of 57°. Furthermore, at her final followup, Risser stage 4 with a gain in height of 26.4 cm was achieved. Considering adequate growth attainment and deterioration in the curvature, revision surgery with fusion was performed. Postoperative Cobb's angle of 23° was achieved with the final correction. During the revisional surgery, signs of implant wear and metallosis were observed at the location of the unconstrained screws. On histological evaluation, chronic inflammation with foreign body granules was seen. However, titanium level in the body was within normal range. She was discharged without any complications. More research on implant wear as a complication in the guided growing rod system is necessary before its widespread use. The occurrence of metallosis with the use of guided growing rod system in growing young children should be considered, when designing the implants.

Revision rates for metal-on-metal hip resurfacing and metal-on-metal total hip arthroplasty - a systematic review

PURPOSE

To compare revision rates of metal-on-metal (MoM) hip resurfacing (HRS) and MoM total hip arthroplasty (THA), as well as the primary causes for revisions.

METHODS

The PubMed database was queried for potentially relevant articles addressing MoMTHA and MoMHRS, a total of 51 articles were included.

RESULTS

The review includes a total number of 5,399 MoMHRS and 3,244 THA prosthesis and the reasons for prosthesis failure were divided into 7 categories and the main causes discussed. The overall MoMTHA revision rate was 4.7% after 6.9 years. MoMHRS revision rate was 5.9% after 5.7 years. The odds ratio was 1.25 (1.03:1.53) 95% CI (p = 0.03) (MoMHRS vs. MoMTHA).The studies of hip prostheses were separated into 2 categories of short- and long-term (more or less than 5 years). Short-term revision rate for MoMTHA was 4.5% after 4.8 years, and for MoMHRS 4.0% after 4.2 years. The odds ratio was 1.09 (0.82:1.43) 95% CI (0 = 0.56) (MoMTHA vs. MoMHRS). Long-term revision rate for MoMTHA was 5.2% after 7.7 years and 8.2% after 7.6 years for MoMHRS. The odds ratio was 1.58 (1.53:1.96) 95% CI (p = 0.0001) (MoMHRS vs. MoMTHA).Revision causes were divided into 7 main categories. The most common cause for revision for both MoMTHA and MoMHRS was loosening 47.6% vs. 37.7%, fracture (MoMTHA 7.69%; MoMHRS 19.62%), metal reactions (MoMTHA 7.69%; MoMHRS 26.92%) infection (MoMTHA 12.08%; MoMHRS 6.54%), instability (MoMTHA 9.13%; MoMHRS 2.69%), manufacturer defect 6.73% for MoMTHA and nonreported for MoMHRS, and miscellaneous (MoMTHA 7.69%; MoMHRS 6.54%) was stated.

INTERPRETATION

The comparison of MoMHRS and MoMTHA revision rates showed no difference in the short term, however in the longer term, the revision rate of MoMHRS was significantly higher than for MoMTHA. The linear increase in revision rate of MoMHRS may indicate a progression in failure.

Metal in Total Hip Arthroplasty: Wear Particles, Biology, and Diagnosis

Total hip arthroplasty (THA) has been performed for nearly 50 years. Between 2006 and 2012, more than 600,000 metal-on-metal THA procedures were performed in the United States. This article reviews the production of metal wear debris in a metal-on-metal articulation and the interaction of cobalt and chromium ions that ultimately led to a dramatic decline in the use of metal-on-metal THA articulations. Additionally, the article reviews mechanisms of metal wear, the biologic reaction to cobalt and chromium ions, the clinical presentation of failing metal-on-metal articulations, and current diagnostic strategies. Further, the article discusses the use of inflammatory markers, metal ion levels, radiographs, metal artifact reduction sequence magnetic resonance imaging, and ultrasound for failed metal-on-metal THA procedures. When adopting new technologies, orthopedic surgeons must weigh the potential increased benefits against the possibility of new mechanisms of failure. Metal-on-metal bearings are a prime example of the give and take between innovation and clinical results, especially in the setting of an already successful procedure such as THA. [Orthopedics. 2016; 39(6):371-379.].

Sequelae of large-head metal-on-metal hip arthroplasties: Current status and future prospects

Large-head metal-on-metal (MoM) bearings were re-popularised in the late 1990s with the introduction of modern hip resurfacing (HR), followed closely by large metal head total hip arthroplasty (THA). A worldwide increase in the use of MoM hip arthroplasty subsequently saw a sharp decline, due to serious complications.MoM was rapidly adopted in the early 2000s until medical device alerts were issued by government regulatory agencies and national and international organisations, leading to post-marketing surveillance and discontinuation of these implants.Guidelines for MoM hip implant follow-up differ considerably between regulatory authorities worldwide; this can in part be attributed to missing or conflicting evidence.The authors consider that the use of large-head MoM THA should be discontinued. MoM HR should be approached with caution and, when considered, should be used only in patients who meet all of the recommended selection criteria, which limits its indications considerably.The phased introduction of new prostheses should be mandatory in future. Close monitoring of outcomes and long-term follow-up is also necessary for the introduction of new prostheses. Cite this article: van Lingen CP, Zagra LM, Ettema HB, Verheyen CC. Sequelae of large-head metal-on-metal hip arthroplasties: current status and future prospects. EFORT Open Rev 2016;1:345-353. DOI: 10.1302/2058-5241.1.160014.

High Re-Operation Rates Using Conserve Metal-On-Metal Total Hip Articulations

Introduction:

Metal-on-metal hip articulations have been intensely debated after reports of adverse reactions and high failure rates. The aim of this study was to retrospectively evaluate the implant of a metal-on.metal total hip articulation (MOM THA) from a single manufacture in a two-center study.

Materials and Methods:

108 CONSERVE^® MOM THA were implanted in 92 patients between November 2005 and December 2010. Patients had at time of retrospective evaluation their journals reviewed for re-operations and adverse reactions.

Results:

20 hips were re-operated (18.4%) at a mean follow up of 53 months. 4 pseudotumors were diagnosed at time of follow up but no substantiated link was made between adverse reactions and re-operations.

Conclusion:

The high re-operation rates found in this study raised concern about the usage of the MOM THA and subsequently lead to the termination of implantation of this MOM THA at the two orthopaedic departments.

Severe Periprosthetic Metallosis and Polyethylene Liner Failure Complicating Total Hip Replacement: The Cloud Sign

We present a case of an 85-year-old woman with extensive metallosis of the left hip joint secondary to prosthetic polyethelene liner dislocation and wear. Radiographs demonstrated amorphous cloudy radiodensities surrounding the prosthesis, a feature we have called the “cloud sign.” The presence of amorphous cloudy radiodensities as a radiographic sign of metallosis has not been previously described to our knowledge.

Small diameter metal-on-metal total hip arthroplasty at 13 years - a follow-up study

INTRODUCTION

Theoretically, the properties of second-generation metal-on-metal (MoM) bearings are better for wear, osteolysis and longevity. However, follow-up studies of more than 10 years are rare, in particular with hybrid fixation (cemented stainless steel stems and cementless cup), therefore we evaluated the results of this combination after a mean follow-up of 12.8 years: (1) to analyze the survival rate, (2) to compare it with the survival rate in the same series after 6.4 years (95.8% cup, 94.8% stem), (3) to evaluate clinical and radiographic outcome and (4) to analyze these failures.

HYPOTHESIS

The number of revisions would increase after 10 years.

MATERIALS AND METHODS

We evaluated 106 total hip arthroplasties (THA) (Cedior™ press-fit cup with cemented Acora™ (n=50) and Exafit™ (n=56) stems and 28mm Metasul™ bearings performed between January 1999 and December 2002. The survival rate was calculated by the Kaplan-Meier method. The clinical assessment included the Postel Merle d'Aubigné (PMA) and Oxford scores. The radiographic assessment evaluated radiolucencies and osteolysis on standard X-rays. A histological analysis was only performed during revision THA.

RESULTS

After a mean 12.8 years of follow-up (10-16), 53 THA were reviewed in 48 patients. Thirteen THA revisions (14%) were performed including 11 aseptic revisions (5 stem fractures, 2 cases of impingement and 3 loosenings [1 bipolar and 3 cups] and one case of osteolysis). Overall survival, taking into account revision for aseptic loosening, was 87.6% (CI 95%=77.3 to 99.3%). The mean PMA and Oxford scores at the final follow-up were 17.6±0.8 points (16-18) and 16.5±5.2 points (12-38) respectively. The radiological follow-up mainly identified radiolucencies around the stem in Gruen zones 1 and 7 (17 and 21% respectively).

DISCUSSION

The survival rate of hybrid MoM THA in this series decreased after 10 years and is lower than studies evaluating cementless THA with the 28-mm Metasul™ bearings (90.9 to 100% survival). Although the clinical results are satisfactory, survival is lower. However, the role of MoM bearings is relative in these failures, in particular because trunnionoses (stainless steel stem with 28-mm head), impingement and especially 5-stem fractures were the main causes of failure.

LEVEL OF EVIDENCE

IV: retrospective study.

Metallosis: CT findings in a total hip arthroplasty

We report a case of a 50-year-old man with extensive metallosis 20 years after right total hip arthroplasty. CT demonstrated osteolysis and radiodense debris surrounding the right hip joint. Although the radiographic appearance of metallosis has been well documented in the literature, the CT appearance of metallosis after total hip arthroplasty has been only sparsely described.

Postoperative radiograph of the hip arthroplasty: what the radiologist should know

This pictorial review aims to provide the radiologist with simple and systematic guidelines for the radiographic evaluation of a hip prosthesis. Currently, there is a plethora of commercially available arthroplasties, making postoperative analysis not always straightforward. Knowledge of the different types of hip arthroplasty and fixating techniques is a prerequisite for correct imaging interpretation. After identification of the type of arthroplasty, meticulous and systematic analysis of the following parameters on an anteroposterior standing pelvic radiograph should be undertaken: leg length, vertical and horizontal centre of rotation, lateral acetabular inclination, and femoral stem positioning. Additional orthogonal views may be useful to evaluate acetabular anteversion. Complications can be classified in three major groups: periprosthetic lucencies, sclerosis or bone proliferation, and component failure or fracture.

Teaching Points

• To give an overview of the different types of currently used hip arthroplasties.

• To provide a simple framework for a systematic approach to postoperative radiographs.

• To discuss radiographic findings of the most common complications.

Innate immune reactions in septic and aseptic osteolysis around hip implants

According to the long-standing definition, septic and aseptic total joint replacement loosening are two distinct conditions with little in common. Septic joint replacement loosening is driven by bacterial infection whereas aseptic loosening is caused by biomaterial wear debris released from the bearing surfaces. However, recently it has been recognized that the mechanisms that drive macrophage activation in septic and aseptic total joint replacement loosening resemble each other. In particular, accumulating evidence indicates that in addition to mediating bacterial recognition and the subsequent inflammatory reaction, toll-like receptors (TLRs) and their ligands, pathogen-associated molecular patterns (PAMPs) and danger-associated molecular patterns (DAMPS), play a key role in wear debris-induced inflammation and macrophage activation. In addition, subclinical bacterial biofilms have been identified from some cases of seemingly aseptic implant loosening. Furthermore, metal ions released from some total joint replacements can activate TLR signaling similar to bacterial derived PAMPs. Likewise, metal ions can function as haptens activating the adaptive immune system similar to bacterial derived antigens. Thus, it appears that aseptic and septic joint replacement loosening share similar underlying pathomechanisms and that this strict dichotomy to sterile aseptic and bacterial-caused septic implant loosening is somewhat questionable. Indeed, rather than being two, well-defined clinical entities, peri-implant osteolysis is, in fact, a spectrum of conditions in which the specific clinical picture is determined by complex interactions of multiple local and systemic factors.

Extreme Cobalt Toxicity: Bearing the Brunt of a Failed Ceramic Liner: A Case Report

CASE

We present a case of systemic cobalt toxicity secondary to third-body wear of a cobalt-chromium (CoCr) femoral head following revision of a fractured ceramic bearing. Removal of the CoCr head was followed by resolution of much of the systemic symptoms.

CONCLUSION

This case supports previous reports of cobalt toxicity secondary to catastrophic third-body wear of a CoCr femoral head following a fractured ceramic bearing. It also demonstrates the potential reversibility of many systemic sequelae associated with cobalt toxicity. To our knowledge, this case represents the highest documented blood cobalt level (45,840 nmol/L).

Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses

Corrosion of modular taper junctions of hip implants may be associated with clinical failure. Taper design parameters, as well as the intraoperatively applied assembly forces, have been proposed to affect corrosion. Fretting corrosion is related to relative interface shear motion and fluid ingress, which may vary with contact force and area. It was hypothesised in this study that assembly forces modify the extent and distribution of the surface contact area at the taper interface between a cobalt chrome head and titanium stem taper with a standard threaded surface profile. Local abrasion of a thin gold coating applied to the stem taper prior to assembly was used to determine the contact area after disassembly. Profilometry was then used to assess permanent deformation of the stem taper surface profile. With increasing assembly force (500 N, 2000 N, 4000 N and 8000 N) the number of stem taper surface profile ridges in contact with the head taper was found to increase (9.2±9.3%, 65.4±10.8%, 92.8±6.0% and 100%) and the overall taper area in contact was also found to increase (0.6±0.7%, 5.5±1.0%, 9.9±1.1% and 16.1±0.9%). Contact was inconsistently distributed over the length of the taper. An increase in plastic radial deformation of the surface ridges (-0.05±0.14 μm, 0.1±0.14 μm, 0.21±0.22 μm and 0.96±0.25 μm) was also observed with increasing assembly force. The limited contact of the taper surface ridges at lower assembly forces may influence corrosion rates, suggesting that the magnitude of the assembly force may affect clinical outcome. The method presented provides a simple and practical assessment of the contact area at the taper interface.

Greater Trochanteric Fragmentation After Failed Metal-on-Metal Hip Arthroplasty

Adverse reaction to metal debris (ARMD) involving the hip joint has emerged as an important reason for failure and revision among patients with metal-on-metal (MOM) hip arthroplasty. To the authors' knowledge, there are no reports of adverse radiographic sequelae in the greater trochanter subsequent to revision for ARMD. The authors describe clinical and radiographic findings in 2 patients who developed greater trochanteric fragmentation 1 to 2 years after conversion of their failed MOM hips to polyethylene bearings. Both patients had solid pseudotumors with tissue necrosis. Several reports describe various clinical features of ARMD. Although poor outcomes have been demonstrated after some MOM revisions, to the authors' knowledge, no reports document greater trochanter fragmentation in ARMD. The current patients highlight the fact that tissue damage occurring with MOM bearing hips can involve bone in addition to soft tissue even after a pseudotumor has been removed and serum metal levels have decreased to normal levels after revision. Unlike the greater trochanteric fractures historically associated with polyethylene wear and osteolysis, no evidence of bone cysts or lesions was found prior to the fractures and neither fracture healed with conservative treatment. For these 2 patients, the authors believe the tissue necrosis included both soft tissue and bone. The necrotic bone resorbed gradually after removal of the MOM bearing, resulting in bone fragmentation with ongoing symptoms. These patients emphasize and remind us that damage is not only limited to soft tissues, but also includes bone. Surgeons should be aware of this radiographic finding and the associated clinical symptoms.