Predicting the Fracture Toughness of Human Cancellous Bone in Fractured Neck of Femur Patients Using Bone Volume and Micro-Architecture

The current protocol used to determine if an individual is osteoporotic relies on assessment of the individual's bone mineral density (BMD), which allows clinicians to judge the condition of a patient with respect to their peers. This, in essence, evaluates a person's fracture risk, because BMD is a good surrogate measure for strength and stiffness. In recent studies, the authors were the first to produce fracture toughness (FT) data from osteoporotic (OP) and osteoarthritic (OA) patients, by using a testing technique which basically analyzes the prerequisite stress conditions for the onset of growth of a major crack through cancellous bone tissue. FT depends mainly on bone quantity (BV/TV, bone volume/tissue volume), but also on bone micro-architecture (mArch), the inner trabecular design of the bone. The working research hypothesis of the present study is that mArch offers added prediction power to BV/TV in determining FT parameters. Consequently, our aim was to investigate the use of predictive models for fracture toughness and also to investigate if there are any significant differences between the models produced from samples loaded across (AC, transverse to) the main trabecular orientation and along (AL, in parallel) the trabeculae. In multilinear regression analysis, we found that the strength of the relationships varied for a crack growing in these two orthogonal directions. Adding mArch variables in the Ac direction helped to increase the R2 to 0.798. However, in the AL direction, adding the mArch parameters did not add any predictive power to using BV/TV alone; BV/TV on its own could produce R2 = 0.730. The present results also imply that the anisotropic layout of the trabeculae makes it more difficult for a major crack to grow transversely across them. Cancellous bone models and remodels itself in a certain way to resist fracture in a specific direction, and thus, we should be mindful that architectural quality as well as bone quantity are needed to understand the resistance to fracture.

Optical coherence tomography and gray scale digital analysis as noninvasive techniques for evaluating molar-incisor hypomineralization severity: A comparative study with microcomputed tomography

Molar-incisor hypomineralization (MIH) is a qualitative defect of dental enamel characterized by demarcated opacities present in permanent first molars and other teeth. It is considered a major clinical challenge in dentistry because it makes affected teeth more susceptible to fractures and dental caries. Its diagnosis is mainly clinical and there are few technological resources that allow for a more accurate diagnosis, especially with respect to the depth of the defect in the dental enamel. In this context, optical coherence tomography (OCT), which is routinely used in ophthalmology, can produce images of the depth of the dental enamel, making it a promising method. In this study, 33 teeth with different MIH severities were evaluated using OCT and microcomputed tomography (microCT). Semi-quantitative methods of grayscale pattern analysis were used to compare images obtained from different severities of MIH with the mineral density obtained through microCT. MicroCT evaluation revealed that hypomineralized enamel had a significantly lower mineral density than intact enamel. However, this difference was not observed between the mild and severe MIH lesions. In the OCT evaluation, significant differences were observed between the intact and hypomineralized enamel, and the gray value comparison provided a method for quantitative differentiation between the two. This study suggests that OCT could be a useful adjunct to traditional diagnostic methods for MIH, offering a noninvasive approach to evaluate enamel defects. RESEARCH HIGHLIGHTS: Combining optical coherence tomography with grayscale digital analysis shows potential as a promising method for diagnosing molar-incisor hypomineralization and assessing its level of severity.

Convergently evolved placental villi show multiscale structural adaptations to differential placental invasiveness

Despite having a single evolutionary origin and conserved function, the mammalian placenta exhibits radical structural diversity. The evolutionary drivers and functional consequences of placental structural diversity are poorly understood. Humans and equids both display treelike placental villi, however these villi evolved independently and exhibit starkly different levels of invasiveness into maternal tissue (i.e. the number of maternal tissue layers between placental tissue and maternal blood). The villi in these species therefore serve as a compelling evolutionary case study to explore whether placentas have developed structural adaptations to respond to the challenge of reduced nutrient availability in less invasive placentas. Here, we use three-dimensional X-ray microfocus computed tomography and electron microscopy to quantitatively evaluate key structures involved in exchange in human and equid placental villi. We find that equid villi have a higher surface area to volume ratio and deeper trophoblastic vessel indentation than human villi. Using illustrative computational models, we propose that these structural adaptations have evolved in equids to boost nutrient transfer to compensate for reduced invasiveness into maternal tissue. We discuss these findings in relation to the 'maternal-fetal conflict hypothesis' of placental evolution.

Dental tissue changes in juvenile and adult mice with osteogenesis imperfecta

Osteogenesis imperfecta (OI), a disorder of type I collagen, causes skeletal deformities as well as defects in dental tissues, which lead to increased enamel wear and smaller teeth with shorter roots. Mice with OI exhibit similar microstructural dentin changes, including reduced dentin tubule density and dentin cross-sectional area. However, the effects of these mutations on gross dental morphology and dental tissue volumes have never been characterized in the osteogenesis imperfecta murine (OIM) mouse model. Here we compare mineralized dental tissue measurements of OIM mice and unaffected wild type (WT) littermates at the juvenile and adult stages. The maxillary and mandibular incisors and first molars were isolated from microCT scans, and tissue volumes and root length were measured. OIM mice have smaller teeth with shorter roots relative to WT controls. Maxillary incisor volumes differed significantly between OIM and WT mice at both the juvenile and young adult stage, perhaps due to shortening of the maxilla itself in OIM mice. Additionally, adult OIM mice have significantly less crown enamel volume than do juveniles, potentially due to loss through wear. Thus, OIM mice demonstrate a dental phenotype similar to humans with OI, with decreased tooth size, decreased root length, and accelerated enamel wear. Further investigation of dental development in the OIM mouse may have important implications for the development and treatment of dental issues in OI patients.

Are Artificial Intelligence-Assisted Three-Dimensional Histological Reconstructions Reliable for the Assessment of Trabecular Microarchitecture?

Objectives: This study aimed to create a three-dimensional histological reconstruction through the AI-assisted classification of tissues and the alignment of serial sections. The secondary aim was to evaluate if the novel technique for histological reconstruction accurately replicated the trabecular microarchitecture of bone. This was performed by conducting micromorphometric measurements on the reconstruction and comparing the results obtained with those of microCT reconstructions. Methods: A bone biopsy sample was harvested upon re-entry following sinus floor augmentation. Following microCT scanning and histological processing, a modified version of the U-Net architecture was trained to categorize tissues on the sections. Detector-free local feature matching with transformers was used to create the histological reconstruction. The micromorphometric parameters were calculated using Bruker's CTAn software (version 1.18.8.0, Bruker, Kontich, Belgium) for both histological and microCT datasets. Results: Correlation coefficients calculated between the micromorphometric parameters measured on the microCT and histological reconstruction suggest a strong linear relationship between the two with p-values of 0.777, 0.717, 0.705, 0.666, and 0.687 for BV/TV, BS/TV, Tb.Pf Tb.Th, and Tb.Sp, respectively. Bland-Altman and mountain plots suggest good agreement between BV/TV measurements on the two reconstruction methods. Conclusions: This novel method for three-dimensional histological reconstruction provides researchers with a tool that enables the assessment of accurate trabecular microarchitecture and histological information simultaneously.

Semi-Automated MicroCT Analysis of Bone Anatomy and Mineralization in Mouse Models

The skeletal system mirrors several processes in the vertebrate body that impact developmental malfunctions, hormonal disbalance, malfunction of calcium metabolism and turn over, and inflammation processes such as arthrosis. X-ray micro computed tomography is a useful tool for 3D in situ evaluation of the skeletal system in a time-related manner, but results depend highly on resolution. Here, we provide the methodological background for a graduated evaluation from whole-body analysis of skeletal morphology and mineralization to high-resolution analysis of femoral and vertebral microstructure. We combine an expert-based evaluation with a machine-learning-based computational approach, including pre-setup analytical task lists. © 2024 Wiley Periodicals LLC. Basic Protocol 1: In vivo microCT scanning and skeletal analysis in mice Basic Protocol 2: Ex vivo high-resolution microCT scanning and microstructural analysis of the femur and L4 vertebra.

Small animal DXA instrument comparison and validation

Several new peripheral dual-energy X-ray absorptiometry (DXA) devices designed for assessment of bone and body composition in rodents have been developed. We compared the performance (accuracy and precision) of two of these devices, the InAlyzer and the iNSiGHT, to those of an established device, the PIXImus. We measured total body bone mineral content (BMC), bone mineral density (BMD), and body composition (lean and fat mass) on the three DXA devices in 18 male C57Bl/6 J mice (6 each of ages 8, 14, and 24 weeks, weighing 22 to 33 g). DXA body composition measures were compared to whole-body nuclear magnetic resonance (NMR) outcomes. BMC of the femur was also compared to ex vivo micro-computed tomography (microCT). Total body BMD from the InAlyzer and iNSiGHT devices was strongly correlated to that from PIXImus (R2 = 0.83 and 0.82, respectively), but was ~25 % higher than PIXImus. Total body BMC measures by InAlyzer were strongly associated with those from PIXImus (R2 = 0.86), whereas those from iNSiGHT were only weakly correlated (R2 = 0.29). Femur BMC from InAlyzer was strongly correlated with microCT outcomes, whereas iNSiGHT was only weakly correlated. InAlyzer and iNSiGHT fat mass measures were very strongly correlated with PIXImus and NMR outcomes (R2 = 0.91 to 0.97), with slightly weaker associations for lean mass (R2 = 0.81 to 0.76). Short-term precision of InAlyzer and iNSiGHT measurements were excellent, and akin to those from the PIXImus for both body composition and bone measures, ranging between 0.39 and 3.2 %. With faster scan times, closed X-ray source and excellent precision, the new devices are both satisfactory replacements for the now discontinued PIXImus system. However, given the accuracy of the bone and body composition measures, the InAlyzer may be preferable for studies where musculoskeletal changes are the main interest.

Validating osteological correlates for the hepatic piston in the American alligator (Alligator mississippiensis)

Unlike the majority of sauropsids, which breathe primarily through costal and abdominal muscle contractions, extant crocodilians have evolved the hepatic piston pump, a unique additional ventilatory mechanism powered by the diaphragmaticus muscle. This muscle originates from the bony pelvis, wrapping around the abdominal viscera, extending cranially to the liver. The liver then attaches to the caudal margin of the lungs, resulting in a sub-fusiform morphology for the entire "pulmo-hepatic-diaphragmatic" structure. When the diaphragmaticus muscle contracts during inspiration, the liver is pulled caudally, lowering pressure in the thoracolumbar cavity, and inflating the lungs. It has been established that the hepatic piston pump requires the liver to be displaced to ventilate the lungs, but it has not been determined if the lungs are freely mobile or if the pleural tissues stretch ventrally. It has been hypothesized that the lungs are able to slide craniocaudally with the liver due to the smooth internal ceiling of the thoracolumbar cavity. We assess this through ultrasound video and demonstrate quantitatively and qualitatively that the pulmonary tissues are sliding craniocaudally across the interior thoracolumbar ceiling in actively ventilating live juvenile, sub-adult, and adult individuals (n = 7) of the American alligator (Alligator mississippiensis) during both natural and induced ventilation. The hepatic piston is a novel ventilatory mechanism with a relatively unknown evolutionary history. Questions related to when and under what conditions the hepatic piston first evolved have previously been left unanswered due to a lack fossilized evidence for its presence or absence. By functionally correlating specific characters in the axial skeleton to the hepatic piston, these osteological correlates can be applied to fossil taxa to reconstruct the evolution of the hepatic piston in extinct crocodylomorph archosaurs.

A high-throughput 3D X-ray histology facility for biomedical research and preclinical applications

Background

The University of Southampton, in collaboration with the University Hospital Southampton (UHS) NHS Foundation Trust and industrial partners, has been at the forefront of developing three-dimensional (3D) imaging workflows using X-ray microfocus computed tomography (μCT) -based technology. This article presents the outcomes of these endeavours and highlights the distinctive characteristics of a μCT facility tailored explicitly for 3D X-ray Histology, with a primary focus on applications in biomedical research and preclinical and clinical studies.

Methods

The UHS houses a unique 3D X-ray Histology (XRH) facility, offering a range of services to national and international clients. The facility employs specialised μCT equipment explicitly designed for histology applications, allowing whole-block XRH imaging of formalin-fixed and paraffin-embedded tissue specimens. It also enables correlative imaging by combining μCT imaging with other microscopy techniques, such as immunohistochemistry (IHC) and serial block-face scanning electron microscopy, as well as data visualisation, image quantification, and bespoke analysis.

Results

Over the past seven years, the XRH facility has successfully completed over 120 projects in collaboration with researchers from 60 affiliations, resulting in numerous published manuscripts and conference proceedings. The facility has streamlined the μCT imaging process, improving productivity and enabling efficient acquisition of 3D datasets.

Discussion & Conclusions

The 3D X-ray Histology (XRH) facility at UHS is a pioneering platform in the field of histology and biomedical imaging. To the best of our knowledge, it stands out as the world's first dedicated XRH facility, encompassing every aspect of the imaging process, from user support to data generation, analysis, training, archiving, and metadata generation. This article serves as a comprehensive guide for establishing similar XRH facilities, covering key aspects of facility setup and operation. Researchers and institutions interested in developing state-of-the-art histology and imaging facilities can utilise this resource to explore new frontiers in their research and discoveries.

Bone strength is reduced in a neonatal androgenized rat model

Background

Whether polycystic ovary syndrome (PCOS) affects bone health during a woman's lifespan remains controversial. An androgenized rodent model replicated many metabolic and reproductive features of women with PCOS, and we aimed to use it to investigate the impact of androgens on microarchitecture (by micro-CT), bone mechanical strength, bone formation and resorption markers in rats with intact ovaries (SHAM) who underwent oophorectomy.

Methods

Wistar rats (Rattus norvegicus albinus) were employed for the experiments in this study. The protocol of androgenization consisted of the application of 1.25 mg s.c. testosterone propionate beteween days 2-5 of life, while the controls received the same amount of corn oil s.c. as previously established. Androgenized SHAM rats exhibited chronic anovulation identified by vaginal cytology and a reduction in the proportion of corpus luteum in the ovary in comparison to control SHAM rats. The realization of the ovariectomy or SHAM procedure occurred on Day 100 of life. All groups (n = 8) were followed-up for 180 days to address the study endpoints.

Results

Micro-CT from androgenized female rats (SHAM) showed a divergence between the trabecular and cortical bone profiles. Compared to SHAM controls, these rats had an increase in trabecular bone mass with a diminution in bone resorption C-terminal telopeptide of type 1 collagen (CTX) (p < 0.05), a concomitant decrease in cortical area and thickness in the femur, and a reduction in the strength of the femur on the mechanical test (p < 0.01).

Conclusions

Our results suggest that a reduction in the cortical thickness and cortical area observed in PCOS model rats was associated with a reduced strength of the femur, despite increased trabecular formation. Ovariectomy in the androgenized OVX group limited the progression rate of cortical bone loss, resulting in bone resistance and cortical thickness comparable to those observed in the control OVX group.

The applications of MicroCT in studying age-related tooth morphological change and dental age estimation: A scoping review

Conventional dental age estimation relies on destructive methods such as sectioning and staining, which are unpreferable when the tooth is required for evidential or archeological preservation. MicroCT is a non-destructive, high-resolution imaging technique that allows for accurate morphometrical measurement. Although microCT technology has been applied in a variety of dental studies, studies focusing on dental age-related change and dental age estimation based on microCT imaging remain lacking. Based on the question: "How has microCT technology been applied in studying human age-related tooth morphological change and dental age estimation studies?", the authors conducted a scoping review in accordance with the Arksey and O'Malley (2005) and the PRISMA-ScR guidelines. A literature search using five major scientific databases identified 452 articles, with 11 full-text articles being eligible to be included in the scoping review. Furthermore, 6 out of the 11 studies performed dental age estimation modeling. An overview of the parameters used in the selected articles revealed a variety of tooth characteristics, such as pulp cavity to whole tooth volume ratio, secondary dentin, as well as the diameter of root canal orifice. The findings of this scoping review highlight the extent microCT is used in studying dental age-related changes, as well as the effectiveness of microCT in dental age estimation studies. This review serves as a guide for future forensic odontology age estimation studies.

A Comprehensive Mechanical Characterization of Subject-Specific 3D Printed Scaffolds Mimicking Trabecular Bone Architecture Biomechanics

This study presents a polymeric scaffold designed and manufactured to mimic the structure and mechanical compressive characteristics of trabecular bone. The morphological parameters and mechanical behavior of the scaffold were studied and compared with trabecular bone from bovine iliac crest. Its mechanical properties, such as modulus of elasticity and yield strength, were studied under a three-step monotonic compressive test. Results showed that the elastic modulus of the scaffold was 329 MPa, and the one for trabecular bone reached 336 MPa. A stepwise dynamic compressive test was used to assess the behavior of samples under various loading regimes. With microcomputed tomography (µCT), a three-dimensional reconstruction of the samples was obtained, and their porosity was estimated as 80% for the polymeric scaffold and 88% for trabecular bone. The full-field strain distribution of the samples was measured using in situ µCT mechanics and digital volume correlation (DVC). This provided information on the local microdeformation mechanism of the scaffolds when compared to that of the tissue. The comprehensive results illustrate the potential of the fabricated scaffolds as biomechanical templates for in vitro studies. Furthermore, there is potential for extending this structure and fabrication methodology to incorporate suitable biocompatible materials for both in vitro and in vivo clinical applications.

Factors Controlling Complex Morphologies of Isomorphous Metal-Organic Frameworks

We demonstrate here how nitrate salts of bivalent copper, nickel, cobalt, and manganese, along with an achiral organic ligand, assemble into various structures such as symmetrical double-decker flowers, smooth elongated hexagonal bipyramids, and hexagonal prisms. Large morphological changes occur in these structures because of different metal cations, although they maintain isomorphous hexagonal crystallographic structures. Metal cations with stronger coordination to ligands (Cu and Ni) tend to form uniform crystals with unusual shapes, whereas weaker coordinating metal cations (Mn and Co) produce crystals with more regular hexagonal morphologies. The unusual flower-like crystals formed with copper nitrate have two pairs of six symmetrical petals with hexagonal convex centers. The texture of the petals indicates dendritic growth. Two different types of morphologies were formed by using different copper nitrate-to-ligand ratios. An excess of the metal salt results in uniform and hexagonal crystals having a narrow size distribution, whereas the use of an excess of ligand results in double-decker morphologies. Mechanistically, an intermediate structure was observed with slightly concave facets and a domed center. Such structures most likely play a key role in the formation of double-decker crystals that can be formed by fusion processes. The coordination chemistry results in isostructural chiral frameworks consisting of two types of continuous helical channels. Four pyridine units from four separate ligands are coordinated to the metal center in a plane having a chiral (propeller-type) arrangement. The individual double-decker flower crystals are homochiral and a batch consists of crystals having both handedness.

Modulation of blood redox status by the progression of induced apical periodontitis in rats

This study aimed to investigate if apical periodontitis in different periods changes systemic levels of the antioxidant and pro-oxidant parameters in Wistar rats. Twenty-four rats were randomly allocated into healthy animals, apical periodontitis at 14 days (AP14) and apical periodontitis at 28 days (AP28). The first mandibular molars were accessed in the AP groups, and the pulp chamber was exposed to the oral environment, inducing the apical lesion. After 14 and 28 days, the animals were anesthetized, euthanized, and hemimandibles were collected for micro-computed tomography (micro-CT) analysis to measure lesion volume, bone volume (BV), percent of bone to total tissue volume (BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular space (Tb.Sp). A histological examination of the remaining bone was also performed. Finally, blood samples were collected for oxidative biochemistry analysis, investigating glutathione (GSH), Trolox equivalent antioxidant capacity (TEAC), and lipid peroxidation (TBARS). The lesion volume was greater at 28 than at 14 days, as shown by micro-CT. AP14 and AP28 had decreased BV and Tb.Th, but only AP28 showed a reduction in BV/TV. Tb.N and Tb. Sp were increased in apical periodontitis at 28 days. In the histopathological analysis, AP14 had focal regions of moderate mononuclear inflammatory infiltrate, and AP28 had an intense inflammatory infiltrate with bacterial colonies. In the biochemical evaluation, GSH, TEAC, and TBARS were increased after 14 days. However, GSH returned to control levels, TEAC was similar to AP14, and TBARS increased significantly after 28 days. Therefore, the oxidative biochemistry response was modulated according to the progression of periapical damage. After 14 days, the organism could still react to the injury. However, at 28 days, the antioxidant response decreased, associated with an increase in TBARS.

Quantitative Evaluation of the 3D Anatomy of the Human Osseous Spiral Lamina Using MicroCT

PURPOSE

The osseous spiral lamina (OSL) is an inner cochlear bony structure that projects from the modiolus from base to apex, separating the cochlear canal into the scala vestibuli and scala tympani. The porosity of the OSL has recently attracted the attention of scientists due to its potential impact on the overall sound transduction. The bony pillars between the vestibular and tympanic plates of the OSL are not always visible in conventional histopathological studies, so imaging of such structures is usually lacking or incomplete. With this pilot study, we aimed, for the first time, to anatomically demonstrate the OSL in great detail and in 3D.

METHODS

We measured width, thickness, and porosity of the human OSL by microCT using increasing nominal resolutions up to 2.5-µm voxel size. Additionally, 3D models of the individual plates at the basal and middle turns and the apex were created from the CT datasets.

RESULTS

We found a constant presence of porosity in both tympanic plate and vestibular plate from basal turn to the apex. The tympanic plate appears to be more porous than vestibular plate in the basal and middle turns, while it is less porous in the apex. Furthermore, the 3D reconstruction allowed the bony pillars that lie between the OSL plates to be observed in great detail.

CONCLUSION

By enhancing our comprehension of the OSL, we can advance our comprehension of hearing mechanisms and enhance the accuracy and effectiveness of cochlear models.

Assessing cortical bone porosity with MRI in an animal model of chronic kidney disease

Chronic kidney disease (CKD) is characterized by secondary hyperparathyroidism and an increased risk of hip fractures predominantly related to cortical porosity. Unfortunately, bone mineral density measurements and high-resolution peripheral computed tomography (HR-pQCT) imaging have shortcomings that limit their utility in these patients. Ultrashort echo time magnetic resonance imaging (UTE-MRI) has the potential to overcome these limitations by providing an alternative assessment of cortical porosity. The goal of the current study was to determine if UTE-MRI could detect changes in porosity in an established rat model of CKD. Cy/+ rats (n = 11), an established animal model of CKD-MBD, and their normal littermates (n = 12) were imaged using microcomputed tomography (microCT) and UTE-MRI at 30 and 35 weeks of age (which approximates late-stage kidney disease in humans). Images were obtained at the distal tibia and the proximal femur. Cortical porosity was assessed using the percent porosity (Pore%) calculated from microCT imaging and the porosity index (PI) calculated from UTE-MRI. Correlations between Pore% and PI were also calculated. Cy/+ rats had higher Pore% than normal rats at both skeletal sites at 35 weeks (tibia = 7.13 % +/- 5.59 % vs. 0.51 % +/- 0.09 %, femur = 19.99 % +/- 7.72 % vs. 2.72 % +/- 0.32 %). They also had greater PI at the distal tibia at 30 weeks of age (0.47 +/- 0.06 vs. 0.40 +/- 0.08). However, Pore% and PI were only correlated in the proximal femur at 35 weeks of age (ρ = 0.929, Spearman). These microCT results are consistent with prior studies in this animal model utilizing microCT imaging. The UTE-MRI results were inconsistent, resulting in variable correlations with microCT imaging, which may be related to suboptimal bound and pore water discrimination at higher magnetic field strengths. Nevertheless, UTE-MRI may still provide an additional clinical tool to assess fracture risk without using ionizing radiation in CKD patients.

X-ray micro-computed tomography of Xenopus tadpole reveals changes in brain ventricular morphology during telencephalon regeneration

Xenopus tadpoles serve as an exceptional model organism for studying post-embryonic development in vertebrates. During post-embryonic development, large-scale changes in tissue morphology, including organ regeneration and metamorphosis, occur at the organ level. However, understanding these processes in a three-dimensional manner remains challenging. In this study, the use of X-ray micro-computed tomography (microCT) for the three-dimensional observation of the soft tissues of Xenopus tadpoles was explored. The findings revealed that major organs, such as the brain, heart, and kidneys, could be visualized with high contrast by phosphotungstic acid staining following fixation with Bouin's solution. Then, the changes in brain shape during telencephalon regeneration were analyzed as the first example of utilizing microCT to study organ regeneration in Xenopus tadpoles, and it was found that the size of the amputated telencephalon recovered to >80% of its original length within approximately 1 week. It was also observed that the ventricles tended to shrink after amputation and maintained this state for at least 3 days. This shrinkage was transient, as the ventricles expanded to exceed their original size within the following week. Temporary shrinkage and expansion of the ventricles, which were also observed in transgenic or fluorescent dye-injected tadpoles with telencephalon amputation, may be significant in tissue homeostasis in response to massive brain injury and subsequent repair and regeneration. This established method will improve experimental analyses in developmental biology and medical science using Xenopus tadpoles.

DiI-CT-A bimodal neural tracer for X-ray and fluorescence imaging

Here, we present an X-ray-visible neural tracer, referred to as DiI-CT, which is based on the well-established lipophilic indocarbocyanine dye DiI, to which we conjugated two iodine atoms. The tracer is visible with microfocus computed tomography (microCT) imaging and shares the excellent fluorescent tracing properties of DiI. We document the discovery potential of DiI-CT by analyzing the vibrissa follicle-sinus complex, a structure where visual access is poor and 3D tissue structure matters and reveal innervation patterns of the intact follicle in unprecedented detail. In the brain, DiI-CT tracing holds promise for verification evaluation of indirect connectivity measures, such as diffusion tensor imaging. We conclude that the bimodal dye DiI-CT opens new avenues for neuroanatomy.

Micro-CT evaluation of the effect of various ScRp instrumentation methods on cement loss, porosity and micro-crack formation

OBJECTIVES

The purpose of this study was to compare the effectiveness of three different instruments on cement loss, porosity and micro-crack formation, which was not evaluated before, following scaling and root planning (SRP) using micro-computed tomography (micro-CT).

METHODS

In this experimental study, 30 single-rooted extracted human teeth were used and divided into three groups. All the teeth were scanned with micro-CT before and after SRP. Group 1: SRP was performed with Gracey curettes, Group 2: SRP was performed by using an ultrasonic device, and Group 3: SRP was performed by using diamond burs. Cement loss from the root surface, porosity, and micro-crack formation in the root dentine were analysed. Micro-CT is used for qualitative and quantitative analysis of samples. The obtained data were analysed statistically (p < 0.05).

RESULTS

Minimum cement loss following SRP was detected with ultrasonic scaler (26.98 mm³ ), whereas the highest was created by diamond burs (96.20 mm³ ) (p < 0.05). The total porosity values after SRP were 0.278%, 0.334% and 0.252% for Groups 1, 2 and 3, respectively. Although Group 3 had the least porosity values, there was no statistically significant difference between the groups. The highest micro-crack formation was seen in Group 2 and the lowest was in Group 1 with a significant difference (p < 0.05).

CONCLUSIONS

More cement loss was observed with diamond burs. Ultrasonic devices appear to be a viable alternative to instrumentation with curettes. However, ultrasonic devices should be used carefully because of micro-crack formation since the micro-crack resulting from instrumentation with hand instruments is the least of all.

Influence of needle design and irrigation depth in the presence of vapor lock: A computational fluid dynamics analysis in human oval roots with apical ramification

This paper aims to study the removal of a vapor lock located in the apical ramification of an oval distal root of a human mandibular molar, simulating different needles and irrigation depths with computational fluid dynamic. A geometric reconstruction of the micro-CT of the molar shaped up to a WaveOne Gold Medium instrument was used. A vapor lock located in the apical 2 mm was incorporated. Geometries with positive pressure needles (side-vented [SV], flat or front-vented [FV] and notched [N]) and the EndoVac microcannula (MiC) were created to run the simulations. Irrigation key parameters (flow pattern, irrigant velocity, apical pressure, wall shear stress) and vapor lock removal were compared among the different simulations. Each needle behaved differently that is, FV removed the vapor lock from one ramification and had the highest apical pressure and shear stress values; SV removed the vapor lock in the main root canal but not in the ramification and reached the lowest apical pressure from the positive pressure needles; N was not able to completely remove the vapor lock and showed low apical pressure and shear stress; MiC removed the vapor lock from one ramification, had negative apical pressure and the lowest maximum shear stress. The main conclusion is that none of the needles showed complete removal of vapor lock. MiC, N, and FV were able to partially remove the vapor lock from one out of the three ramifications. However, SV needle was the only simulation that showed high shear stress with low apical pressure.

Applications of Microct Imaging to Archaeobotanical Research

The potential applications of microCT scanning in the field of archaeobotany are only just beginning to be explored. The imaging technique can extract new archaeobotanical information from existing archaeobotanical collections as well as create new archaeobotanical assemblages within ancient ceramics and other artefact types. The technique could aid in answering archaeobotanical questions about the early histories of some of the world's most important food crops from geographical regions with amongst the poorest rates of archaeobotanical preservation and where ancient plant exploitation remains poorly understood. This paper reviews current uses of microCT imaging in the investigation of archaeobotanical questions, as well as in cognate fields of geosciences, geoarchaeology, botany and palaeobotany. The technique has to date been used in a small number of novel methodological studies to extract internal anatomical morphologies and three-dimensional quantitative data from a range of food crops, which includes sexually-propagated cereals and legumes, and asexually-propagated underground storage organs (USOs). The large three-dimensional, digital datasets produced by microCT scanning have been shown to aid in taxonomic identification of archaeobotanical specimens, as well as robustly assess domestication status. In the future, as scanning technology, computer processing power and data storage capacities continue to improve, the possible applications of microCT scanning to archaeobotanical studies will only increase with the development of machine and deep learning networks enabling the automation of analyses of large archaeobotanical assemblages.

Finite-Element Modelling Based on Optical Coherence Tomography and Corresponding X-ray MicroCT Data for Three Human Middle Ears

PURPOSE

Optical coherence tomography (OCT) is an emerging imaging modality which is non-invasive, can be employed in vivo, and can record both anatomy and vibrations. The purpose here is to explore the application of finite-element (FE) modelling to OCT data.

METHODS

We recorded vibrations for three human cadaver middle ears using OCT. We also have X-ray microCT images from the same ears. Three FE models were built based on geometries obtained from the microCT images. The material properties and boundary conditions of the models were obtained from previously reported studies.

RESULTS

Tympanic-membrane (TM) vibration patterns were computed for the three models and compared with the patterns measured using OCT. Frequency responses were also computed for all three models for several locations in the middle ear and compared with the OCT displacements and with the literature. The three models were compared with each other in terms of geometry and function. Parameter sensitivity analyses were done and the results were compared among the models and with the literature. The simulated TM displacement patterns are qualitatively similar to the OCT results. The simulated displacements are closer to the OCT results for 500 Hz and 1 kHz but the differences are greater at 2 kHz.

CONCLUSION

This study provides an initial look at the combined use of OCT measurements and FE modelling based on subject-specific anatomy. The geometries and parameters of the existing FE models could be modified for individual patients in the future to help identify abnormalities in the middle ear.

Deep-learning segmentation of fascicles from microCT of the human vagus nerve

Introduction

MicroCT of the three-dimensional fascicular organization of the human vagus nerve provides essential data to inform basic anatomy as well as the development and optimization of neuromodulation therapies. To process the images into usable formats for subsequent analysis and computational modeling, the fascicles must be segmented. Prior segmentations were completed manually due to the complex nature of the images, including variable contrast between tissue types and staining artifacts.

Methods

Here, we developed a U-Net convolutional neural network (CNN) to automate segmentation of fascicles in microCT of human vagus nerve.

Results

The U-Net segmentation of ~500 images spanning one cervical vagus nerve was completed in 24 s, versus ~40 h for manual segmentation, i.e., nearly four orders of magnitude faster. The automated segmentations had a Dice coefficient of 0.87, a measure of pixel-wise accuracy, thus suggesting a rapid and accurate segmentation. While Dice coefficients are a commonly used metric to assess segmentation performance, we also adapted a metric to assess fascicle-wise detection accuracy, which showed that our network accurately detects the majority of fascicles, but may under-detect smaller fascicles.

Discussion

This network and the associated performance metrics set a benchmark, using a standard U-Net CNN, for the application of deep-learning algorithms to segment fascicles from microCT images. The process may be further optimized by refining tissue staining methods, modifying network architecture, and expanding the ground-truth training data. The resulting three-dimensional segmentations of the human vagus nerve will provide unprecedented accuracy to define nerve morphology in computational models for the analysis and design of neuromodulation therapies.

MicroCT analysis unveils the role of inflatable female genitalia and male tibial complex in the genital coupling in the spider genus Aysha (Anyphaenidae, Araneae)

Sperm transfer in spiders is achieved by copulatory organs on the male pedipalps (i.e., copulatory bulbs), which can be simple or a complex set of sclerites and membranes. During copulation, these sclerites can be used to anchor in corresponding structures in the female genitalia by means of hydraulic pressure. In the most diverse group of Entelegynae spiders, the retrolateral tibial apophysis clade, the female role in the coupling of genitalia is considered rather passive, as conformational changes of the female genital plate (i.e., the epigyne) during copulation are scarce. Here, we reconstruct the genital mechanics of two closely related species belonging to the Aysha prospera group (Anyphaenidae) that bear a membranous, wrinkled epigyne and male pedipalps with complex tibial structures. By using microcomputed tomography data of a cryofixed mating pair, we reveal that most of the epigyne remains greatly inflated during genital coupling, and that the male tibial structures are coupled to the epigyne by the inflation of a tibial hematodocha. We propose that a turgent female vulva is a prerequisite for the genital coupling, which could implicate a female control device, and that the structures from the male copulatory bulb have been functionally replaced by tibial structures in these species. Furthermore, we show that the conspicuous median apophysis is maintained in spite of being functionally redundant, posing a puzzling situation.

Correlative multiscale microCT-SBF-SEM imaging of resin-embedded tissue

Three-dimensional biological microscopy presents a trade-off between spatial resolution and field of view. Correlative approaches applying multiple imaging techniques to the same sample can therefore mitigate against these trade-offs. Here, we present a workflow for correlative microscopic X-ray microfocus computed tomography (microCT) and serial block face scanning electron microscopy (SBF-SEM) imaging of resin-embedded tissue, using mammalian placental tissue samples as an example. This correlative X-ray and electron microscopy (CXEM) workflow allows users to image the same sample at multiple resolutions, and target the region of interest (ROI) for SBF-SEM based on microCT. We detail the protocols associated with this workflow and demonstrate its application in multiscale imaging of horse placental villi and ROI selection in the labyrinthine zone of a mouse placenta. These examples demonstrate how the protocol may need to be adapted for tissues with different densities.

Time-dependent structural changes and hypermineralisation of artificially demineralised dentine following treatment with silver diammine fluoride and glass ionomer cement

OBJECTIVES

This study aimed to evaluate the change of mineral content in dentine lesions over time and examine the effectiveness of the combined treatment with silver diammine fluoride (SDF) and glass ionomer cement (GIC).

METHODS

Sixty bovine dentine specimens were divided into 4 groups: cont, Fuji, Safo, and Safo+Fuji. The specimens were imaged and measured using microcomputed tomography (microCT) at 7 time points: pre-demineralisation, after demineralisation for two weeks, immediately after treatment, 1 week, 2 weeks, 1 month, and 3 months after treatment. The 3-month group was evaluated with a light microscope, attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and scanning electron microscope (SEM)/energy-dispersive X-ray spectroscopy (EDS). Data were analysed by Dunn's test and Wilcoxon signed rank test with Bonferroni correction for microCT, and Kruskal-Wallis test and two-way analysis of variance for EDS characterisation.

RESULTS

MicroCT images showed high mineral density beneath dentine lesions in Safo+Fuji. The mineral density at 600 μm in Safo+Fuji increased significantly over time, while Safo showed an opposite trend (adjusted p<0.005). In Safo+Fuji, EDS revealed significantly high energy of fluorine (p<0.05, at 300 μm) and a tendency towards high energy of calcium (p>0.05). However, Safo+Fuji showed lower energy of silver compared to Safo (p<0.001). ATR-FTIR revealed that phosphate groups had the highest peak at a depth between 300 and 400 μm in Safo+Fuji.

CONCLUSIONS

Safo+Fuji was effective in remineralising the deep lesion in dentine after one and three months, and a hypermineralisation zone generated beneath the lesion demonstrated additional benefit in this study.

CLINICAL SIGNIFICANCE

This long-term in vitro study showed that SDF+GIC treatment could strengthen the structure of decayed teeth when applied in the treatment of patients with advanced rampant caries.

The association between paraspinal muscle parameters and vertebral pedicle microstructure in patients undergoing lumbar fusion surgery

PURPOSE

Lumbar fusion surgery has become a standard procedure in spine surgery and commonly includes the posterior placement of pedicle screws. Bone quality is a crucial factor that affects pedicle screw purchase. However, the relationship between paraspinal muscles and the bone quality of the pedicle is unknown. The aim of the study was to determine the relationship between paraspinal muscles and the ex vivo bony microstructure of the lumbar pedicle.

METHODS

Prospectively, collected data of patients undergoing posterior lumbar fusion for degenerative spinal conditions was analyzed. Pre-operative lumbar magnetic resonance imaging (MRI) scans were evaluated for a quantitative assessment of the cross-sectional area (CSA), functional cross-sectional area (fCSA), and the proportion of intramuscular fat (FI) for the psoas muscle and the posterior paraspinal muscles (PPM) at L4. Intra-operative bone biopsies of the lumbar pedicle were obtained and analyzed with microcomputed tomography (µCT) scans. The following cortical (Cort) and trabecular (Trab) bone parameters were assessed: bone volume fraction (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Th), connectivity density (CD), bone-specific surface (BS/BV), apparent density (AD), and tissue mineral density (TMD).

RESULTS

A total of 26 patients with a mean age of 59.1 years and a mean BMI of 29.8 kg/m2 were analyzed. fCSAPPM showed significant positive correlations with BV/TVTrab (ρ = 0.610; p < 0.001), CDTrab (ρ = 0.679; p < 0.001), Tb.NTrab (ρ = 0.522; p = 0.006), Tb.ThTrab (ρ = 0.415; p = 0.035), and ADTrab (ρ = 0.514; p = 0.007). Cortical bone parameters also demonstrated a significant positive correlation with fCSAPPM (BV/TVCort: ρ = 0.584; p = 0.002; ADCort: ρ = 0.519; p = 0.007). FIPsoas was negatively correlated with TMDCort (ρ =  - 0.622; p < 0.001).

CONCLUSION

This study highlights the close interactions between the bone microstructure of the lumbar pedicle and the paraspinal muscle morphology. These findings give us further insights into the interaction between the lumbar pedicle microstructure and paraspinal muscles.

Morphological and Chemical Investigation of Ovarian Structures in a Bovine Model by Contrast-Enhanced X-ray Imaging and Microscopy

An improved understanding of an ovary's structures is highly desirable to support advances in folliculogenesis knowledge and reproductive medicine, with particular attention to fertility preservation options for prepubertal girls with malignant tumors. Although currently the golden standard for structural analysis is provided by combining histological sections, staining, and visible 2D microscopic inspection, synchrotron radiation phase-contrast microtomography is becoming a new challenge for three-dimensional studies at micrometric resolution. To this aim, the proper use of contrast agents can improve the visualization of internal structures in ovary tissues, which normally present a low radiopacity. In this study, we report a comparison of four staining protocols, based on iodine or tungsten containing agents, applied to bovine ovarian tissues fixed in Bouin's solution. The microtomography (microCT) analyses at two synchrotron facilities under different set-ups were performed at different energies in order to maximize the image contrast. While tungsten-based agents allow large structures to be well identified, Iodine ones better highlight smaller features, especially when acquired above the K-edge energy of the specific metal. Further scans performed at lower energy where the setup was optimized for overall quality and sensitivity from phase-contrast still provided highly resolved visualization of follicular and intrafollicular structures at different maturation stages, independent of the staining protocol. The analyses were complemented by X-ray Fluorescence mapping on 2D sections, showing that the tungsten-based agent has a higher penetration in this type of tissues.

Analyzing anatomy over three dimensions unpacks the differences in mesophyll diffusive area between sun and shade Vitis vinifera leaves

Leaves grown at different light intensities exhibit considerable differences in physiology, morphology and anatomy. Because plant leaves develop over three dimensions, analyses of the leaf structure should account for differences in lengths, surfaces, as well as volumes. In this manuscript, we set out to disentangle the mesophyll surface area available for diffusion per leaf area (S m,LA) into underlying one-, two- and three-dimensional components. This allowed us to estimate the contribution of each component to S m,LA, a whole-leaf trait known to link structure and function. We introduce the novel concept of a 'stomatal vaporshed,' i.e. the intercellular airspace unit most closely connected to a single stoma, and use it to describe the stomata-to-diffusive-surface pathway. To illustrate our new theoretical framework, we grew two cultivars of Vitis vinifera L. under high and low light, imaged 3D leaf anatomy using microcomputed tomography (microCT) and measured leaf gas exchange. Leaves grown under high light were less porous and thicker. Our analysis showed that these two traits and the lower S m per mesophyll cell volume (S m,Vcl) in sun leaves could almost completely explain the difference in S m,LA. Further, the studied cultivars exhibited different responses in carbon assimilation per photosynthesizing cell volume (A Vcl). While Cabernet Sauvignon maintained A Vcl constant between sun and shade leaves, it was lower in Blaufränkisch sun leaves. This difference may be related to genotype-specific strategies in building the stomata-to-diffusive-surface pathway.

Evaluation of a lanthanide nanoparticle-based contrast agent for microcomputed tomography of porous channels in subchondral bone

Osteoarthritis (OA) is a chronic joint disease that causes disability and pain. The osteochondral interface is a gradient tissue region that plays a significant role in maintaining joint health. It has been shown that during OA, increased neoangiogenesis creates porous channels at the osteochondral interface allowing the transport of molecules related to OA. Importantly, the connection between these porous channels and the early stages of OA development is still not fully understood. Microcomputed tomography (microCT) offers the ability to image the porous channels at the osteochondral interface, however, a contrast agent is necessary to delineate the different X-ray attenuations of the tissues. In this study BaYbF₅ -SiO₂ nanoparticles are synthesized and optimized as a microCT contrast agent to obtain an appropriate contrast attenuation for subsequent segmentation of structures of interest, that is, porous channels, and mouse subchondral bone. For this purpose, BaYbF₅ nanoparticles were synthesized and coated with a biocompatible silica shell (SiO₂ ). The optimized BaYbF₅ -SiO₂ 27 nm nanoparticles exhibited the highest average microCT attenuation among the biocompatible nanoparticles tested. The BaYbF₅ -SiO₂ 27 nm nanoparticles increased the mean X-ray attenuation of structures of interest, for example, porous channel models and mouse subchondral bone. The BaYbF₅ -SiO₂ contrast attenuation was steady after diffusion into mouse subchondral bone. In this study, we obtained for the first time, the average microCT attenuation of the BaYbF₅ -SiO₂ nanoparticles into porous channel models and mouse subchondral bone. In conclusion, BaYbF₅ -SiO₂ nanoparticles are a potential contrast agent for imaging porous channels at the osteochondral interface using microCT.

Morphology and volume of Meibomian glands ex vivo pre and post partial tarsal plate excision, cryotherapy and laser therapy in the dog using microCT

OBJECTIVE

To determine the morphology and volume of Meibomian glands (MG) of dogs with microCT before and after partial tarsal plate excision (PTPE), cryotherapy, and laser therapy.

PROCEDURE

MicroCT scans were made of 12 upper lids (ULs) and lower lids (LLs) of 12 dogs. After undergoing PTPE, 10 ULs and LLs were scanned again, and one UL and one LL was scanned after laser therapy and one UL and one LL after cryotherapy.

RESULTS

The length of the area containing MGs did not change pre- and post-PTPE, and cryo- or laser therapy. The mean number of MGs in the ULs and LLs was 30.50 and 29.42, respectively, and did not change during the procedures. The average length of one individual MG was 2.60 mm. The mean volume of MGs in the 10 ULs and LLs pre-PTPE was 21.45 and 17.2 mm³ , respectively, and 12.84 and 11.25 mm³ in the UL and LL after PTPE, respectively. The mean volume of MGs decreased from 29.78 mm³ precryotherapy to 28.91 mm³ post-treatment and in the lower eyelid from 22.87 to 22.4 mm³ after cryotherapy. The mean volume of MGs in the UL and LL before laser therapy was 8.95 and 6.78 mm³ , respectively, and after 9.25 and 6.38 mm³ , respectively.

CONCLUSION

MicroCT is a valuable tool to determine the morphology and the volume of MGs and to demonstrate changes that occur after PTPE, laser-, and cryotherapy. There is no need for additional preparation, such as staining, of the specimen prior to scanning.

A bump in the node: The hydraulic implications of rhizomatous growth

PREMISE

Rhizomatous growth characterizes numerous taxa among vascular plants. While abundant information exists on nutrient sharing and demography, the question of how these metameric organisms move water through their bodies remains largely unstudied. Moreover, we lack an understanding of the evolutionary implications of rhizomatous growth across vascular plants. Here, we examined these questions by investigating how rhizomatous growth and vascular construction affect whole-plant hydraulic function.

METHODS

In five terrestrial fern species with diverse vascular construction, we used microcomputed tomography and bright-field microscopy to examine vascular construction across nodes along the rhizome. These data were integrated with measurements of leaf stomatal conductance under rooted and uprooted conditions to relate vascular patterning and hydraulic architecture to leaf water status.

RESULTS

Similar to phytomers of woody seed plants, nodal regions in rhizomatous ferns are areas of hydraulic resistance. While water is shared along the rhizomes of these investigated species, hydraulic conductivity drops at nodes and stomatal conductance declines when nodes were locally uprooted. Together, our data suggest that nodes are chokepoints in axial water movement along the rhizome.

CONCLUSIONS

Nodal chokepoints decrease hydraulic integration between phytomers. At the same time, chokepoints may act as "safety valves", hydraulically localizing each phytomer-potentially decreasing embolism and pathogen spread. This suggests a potential trade-off in the principal construction of the fern rhizome. Moreover, we propose that shoot-borne roots (homorhizy) and the prostrate habit of rhizomatous ferns decrease the hydraulic and structural burdens that upright plants typically incur. The absence of these hydraulic and structural demands may be one reason ferns (and many rhizomatous plants) lack, or have minimally developed, secondary xylem.

Minimal Detectable Width of Tooth Fractures Using Magnetic Resonance Imaging and Method to Measure

INTRODUCTION

Vertical root fracture (VRF) in root canal-treated (RCT) teeth is a common cause of pain, bone resorption, and tooth loss. VRF is also difficult to diagnose and measure. Magnetic resonance imaging (MRI) has the potential to identify VRF due to beneficial partial volume averaging, without using ionizing radiation. This investigation aimed to describe the narrowest VRFs detectable based on MRI, using micro-computed tomography (microCT) as the reference standard and proposes a method using profile integrals to measure the widths of small VRFs.

METHODS

VRFs were induced in 62 RCT tooth root samples. All samples were imaged in a phantom using MRI and reference imaging was obtained using microCT. The stacks of 3-dimensional axial MRIs were assessed by 3 board-certified endodontists. Evaluators determined the most coronal slice within the stack that was discernible as the extent of the VRF. This slice was measured on correlated microCT sections to determine the minimum VRF width (μm) detectable using a profile integral-based method to measure small fractures and negate the effects of the point spread function.

RESULTS

Using profile integrals to measure VRF width was repeatable and resulted in estimates that were on average 1 μm smaller than known reference widths. Adjusted median VRF width detected using MRI was 45 μm (first quartile: 26 μm, third quartile: 64 μm).

CONCLUSION

Using profile integrals is a valid way to estimate small VRF width. The MRI approach demonstrated ability to repeatedly detect VRFs as small as 26 μm.

Deformation of implant retaining screws-Study with stereoscopic microscopy and microCT

BACKGROUND

The prosthetic screw fixes the prostheses to the implants. Upon osteointegration, the untightening of the prosthetic screw is the most common problem in oral rehabilitation with implants.

OBJECTIVE

To study the deformation of the implant retaining hexagonal screw head.

METHODS

This investigation used two methods for evaluating the screw head's area of deformation (mm² ): a stereoscopic microscopy and micro computed tomography (microCT). For stereoscopic microscopy, 16 titanium alloy (T) and 16 titanium gold-plated alloy (G) screws of the Zimmer Biomet™ brand were used, divided into eight groups: group 0 (control group), groups T1 and G1 (screws tightened 10 times to 20 Ncm), the groups T2 and G2 (screws tightened 20 times to 20 Ncm) and the groups T3 and G3 (screws tightened 10 times to 30 Ncm). In the study with microCT, one screw was randomly chosen from each of the groups described above to perform the scanning by microCT.

RESULTS

When comparing the type of screw material using stereoscopic microscopy, no statistically significant differences were found (p > 0.05). Contrarily, different number of successive grips and different torque value showed statistically significant differences in the head section of the retaining screws (p < 0.05). The observation by microCT showed the torque applied is crucial to the head deformation in titanium screws. In gold-plated screws the successive tightening appears to be pivotal.

CONCLUSION

Titanium and gold screws tend to behave similarly. By increasing the tightening cycles and the torque values of protocols greater levels of deformations can be expected. In general, microCT data showed better results for gold-plated titanium alloy.

CLINICAL SIGNIFICANCE

To control severe screw head deformation and the impossibility of untightening the implant's restoration, clinicians should avoid extreme torque values and prevent surpassing 10 tightening cycles.

Otosclerosis under microCT: New insights into the disease and its anatomy

Purpose

Otospongiotic plaques can be seen on conventional computed tomography (CT) as focal lesions around the cochlea. However, the resolution remains insufficient to enable evaluation of intracochlear damage. MicroCT technology provides resolution at the single micron level, offering an exceptional amplified view of the otosclerotic cochlea. In this study, a non-decalcified otosclerotic cochlea was analyzed and reconstructed in three dimensions for the first time, using microCT technology. The pre-clinical relevance of this study is the demonstration of extensive pro-inflammatory buildup inside the cochlea which cannot be seen with conventional cone-beam CT (CBCT) investigation.

Materials and Methods

A radiological and a three-dimensional (3D) anatomical study of an otosclerotic cochlea using microCT technology is presented here for the first time. 3D-segmentation of the human cochlea was performed, providing an unprecedented view of the diseased area without the need for decalcification, sectioning, or staining.

Results

Using microCT at single micron resolution and geometric reconstructions, it was possible to visualize the disease's effects. These included intensive tissue remodeling and highly vascularized areas with dilated capillaries around the spongiotic foci seen on the pericochlear bone. The cochlea's architecture as a morphological correlate of the otosclerosis was also seen. With a sagittal cut of the 3D mesh, it was possible to visualize intense ossification of the cochlear apex, as well as the internal auditory canal, the modiolus, the spiral ligament, and a large cochleolith over the osseous spiral lamina. In addition, the oval and round windows showed intense fibrotic tissue formation and spongiotic bone with increased vascularization. Given the recently described importance of the osseous spiral lamina in hearing mechanics and that, clinically, one of the signs of otosclerosis is the Carhart notch observed on the audiogram, a tonotopic map using the osseous spiral lamina as region of interest is presented. An additional quantitative study of the porosity and width of the osseous spiral lamina is reported.

Conclusion

In this study, structural anatomical alterations of the otosclerotic cochlea were visualized in 3D for the first time. MicroCT suggested that even though the disease may not appear to be advanced in standard clinical CT scans, intense tissue remodeling is already ongoing inside the cochlea. That knowledge will have a great impact on further treatment of patients presenting with sensorineural hearing loss.

Effect of chronic lithium on mechanical sensitivity and trabecular bone loss induced by type-1 diabetes mellitus in mice

Type-1 diabetes mellitus (T1DM) is a chronic condition characterized by long-term hyperglycemia that results in several complications such as painful peripheral neuropathy, bone deterioration, and increased risk of bone fractures. Lithium, a first-line therapy for bipolar disorder, has become an attractive agent for attenuating peripheral neuropathy and menopause-induced bone loss. Therefore, our aim was to determine the effect of chronic lithium treatment on mechanical hypersensitivity and trabecular bone loss induced by T1DM in mice. T1DM was induced in male C57BL/6J mice by intraperitoneal injection of streptozotocin (STZ, 50 mg/kg/day, for 5 consecutive days). 12 weeks after T1DM-induction, mice received a daily intraperitoneal injection of vehicle, 30 or 60 mg/kg lithium (as LiCl) for 6 weeks. Throughout the treatment period, blood glucose levels and mechanical sensitivity were evaluated every 2 weeks. After lithium treatment, the femur and L5 vertebra were harvested for microcomputed tomography (microCT) analysis. T1DM mice showed significant hyperglycemia, mechanical hypersensitivity, and significant trabecular bone loss as compared with the control group. Chronic lithium treatment did not revert the hindpaw mechanical hypersensitivity nor hyperglycemia associated to T1DM induced by STZ. In contrast, microCT analysis revealed that lithium reverted, in a dose-dependent manner, the loss of trabecular bone associated to T1DM induced by STZ at both the distal femur and L5 vertebra. Lithium treatment by itself did not affect any trabecular bone parameter in non-diabetic mice.

Minute workers and large soldiers in the subterranean ant Carebara perpusilla: Musculoskeletal consequences of Haller's rule in the thorax

Many organismal traits vary with body size, often reflecting trade-offs in the face of size-dependent constraints. For example, Haller's rule, the allometric pattern whereby smaller organisms have proportionally larger brains, can have carry-on effects on head design as the brain competes for space with other structures. Ant species with polymorphic worker castes are interesting cases for helping us understand these allometric effects. Here, we examine the effects of miniaturization on the ant power core, the mesosoma (thorax), with particular attention to how the scaling of nervous system structures affects the skeletomuscular elements involved with load bearing and locomotion. Using X-ray computed microtomography (microCT), we studied the thorax of Carebara perpusilla, an African ant species that has minute workers (1.5 mm-long) and larger soldiers (3.0 mm-long), allowing strong intraspecific comparisons. We find that the thoracic nervous system is relatively larger in minute workers, similar to Haller's rule, with consequences on the skeletomuscular organisation. Minute workers have relatively smaller petiole muscles and indirect head muscles, but relatively larger external trochanter muscles and direct head muscles. We link these allometric trade-offs to miniaturization and division of labor, and discuss how thorax design underlies the success of minute ants.

Genome size drives morphological evolution in organ-specific ways

Morphogenesis is an emergent property of biochemical and cellular interactions during development. Genome size and the correlated trait of cell size can influence these interactions through effects on developmental rate and tissue geometry, ultimately driving the evolution of morphology. We tested whether variation in genome and body size is related to morphological variation in the heart and liver using nine species of the salamander genus Plethodon (genome sizes 29-67 gigabases). Our results show that overall organ size is a function of body size, whereas tissue structure changes dramatically with evolutionary increases in genome size. In the heart, increased genome size is correlated with a reduction of myocardia in the ventricle, yielding proportionally less force-producing mass and greater intertrabecular space. In the liver, increased genome size is correlated with fewer and larger vascular structures, positioning hepatocytes farther from the circulatory vessels that transport key metabolites. Although these structural changes should have obvious impacts on organ function, their effects on organismal performance and fitness may be negligible because low metabolic rates in salamanders relax selective pressure on function of key metabolic organs. Overall, this study suggests large genome and cell size influence the developmental systems involved in heart and liver morphogenesis.

New frontiers in imaging, anatomy, and mechanics of crocodylian jaw muscles

New imaging and biomechanical approaches have heralded a renaissance in our understanding of crocodylian anatomy. Here, we review a series of approaches in the preparation, imaging, and functional analysis of the jaw muscles of crocodylians. Iodine-contrast microCT approaches are enabling new insights into the anatomy of muscles, nerves, and other soft tissues of embryonic as well as adult specimens of alligators. These imaging data and other muscle modeling methods offer increased accuracy of muscle sizes and attachments without destructive methods like dissection. 3D modeling approaches and imaging data together now enable us to see and reconstruct 3D muscle architecture which then allows us to estimate 3D muscle resultants, but also measurements of pennation in ways not seen before. These methods have already revealed new information on the ontogeny, diversity, and function of jaw muscles and the heads of alligators and other crocodylians. Such approaches will lead to enhanced and accurate analyses of form, function, and evolution of crocodylians, their fossil ancestors and vertebrates in general.

Ontogeny of a tessellated surface: Carapace growth of the longhorn cowfish Lactoria cornuta

Biological armors derive their mechanical integrity in part from their geometric architectures, often involving tessellations: individual structural elements tiled together to form surface shells. The carapace of boxfish, for example, is composed of mineralized polygonal plates, called scutes, arranged in a complex geometric pattern and nearly completely encasing the body. In contrast to artificial armors, the boxfish exoskeleton grows with the fish; the relationship between the tessellation and the gross structure of the armor is therefore critical to sustained protection throughout growth. To clarify whether or how the boxfish tessellation is maintained or altered with age, we quantify architectural aspects of the tessellated carapace of the longhorn cowfish Lactoria cornuta through ontogeny (across nearly an order of magnitude in standard length) and in a high‐throughput fashion, using high‐resolution microCT data and segmentation algorithms to characterize the hundreds of scutes that cover each individual. We show that carapace growth is canalized with little variability across individuals: rather than continually adding scutes to enlarge the carapace surface, the number of scutes is surprisingly constant, with scutes increasing in volume, thickness, and especially width with age. As cowfish and their scutes grow, scutes become comparatively thinner, with the scutes at the edges (weak points in a boxy architecture) being some of the thickest and most reinforced in younger animals and thinning most slowly across ontogeny. In contrast, smaller scutes with more variable curvature were found in the limited areas of more complex topology (e.g., around fin insertions, mouth, and anus). Measurements of Gaussian and mean curvature illustrate that cowfish are essentially tessellated boxes throughout life: predominantly zero curvature surfaces comprised of mostly flat scutes, and with scutes with sharp bends used sparingly to form box edges. Since growth of a curved, tiled surface with a fixed number of tiles would require tile restructuring to accommodate the surface's changing radius of curvature, our results therefore illustrate a previously unappreciated advantage of the odd boxfish morphology: by having predominantly flat surfaces, it is the box‐like body form that in fact permits a relatively straightforward growth system of this tessellated architecture (i.e., where material is added to scute edges). Our characterization of the ontogeny and maintenance of the carapace tessellation provides insights into the potentially conflicting mechanical, geometric, and developmental constraints of this species but also perspectives into natural strategies for constructing mutable tiled architectures.

The carapace of boxfish is composed of mineralized polygonal plates, called scutes, arranged in a complex geometric pattern and nearly completely encasing the body. To clarify whether or how this armor is maintained or altered with age, we quantify architectural aspects of the carapace of the longhorn cowfish Lactoria cornuta through ontogeny, using high‐resolution microCT data and segmentation algorithms to characterize the hundreds of scutes that cover each individual.

Structural organization of the spongy mesophyll

Many plant leaves have two layers of photosynthetic tissue: the palisade and spongy mesophyll. Whereas palisade mesophyll consists of tightly packed columnar cells, the structure of spongy mesophyll is not well characterized and often treated as a random assemblage of irregularly shaped cells. Using micro-computed tomography imaging, topological analysis, and a comparative physiological framework, we examined the structure of the spongy mesophyll in 40 species from 30 genera with laminar leaves and reticulate venation. A spectrum of spongy mesophyll diversity encompassed two dominant phenotypes: first, an ordered, honeycomblike tissue structure that emerged from the spatial coordination of multilobed cells, conforming to the physical principles of Euler's law; and second, a less-ordered, isotropic network of cells. Phenotypic variation was associated with transitions in cell size, cell packing density, mesophyll surface-area-to-volume ratio, vein density, and maximum photosynthetic rate. These results show that simple principles may govern the organization and scaling of the spongy mesophyll in many plants and demonstrate the presence of structural patterns associated with leaf function. This improved understanding of mesophyll anatomy provides new opportunities for spatially explicit analyses of leaf development, physiology, and biomechanics.

Foliar water uptake does not contribute to embolism repair in beech (Fagus sylvatica L.)

BACKGROUND AND AIMS

Foliar water uptake has recently been suggested as a possible mechanism for the restoration of hydraulically dysfunctional xylem vessels. In this paper we used a combination of ecophysiological measurements, X-ray microcomputed tomography and cryo-scanning electron microscopy during a drought treatment to fully evaluate this hypothesis.

KEY RESULTS

Based on an assessment of these methods in beech (Fagus sylvatica L.) seedlings we were able to (1) confirm an increase in the amount of hydraulically redistributed water absorbed by leaves when the soil water potential decreased, and (2) locate this redistributed water in hydraulically active vessels in the stem. However, (3) no embolism repair was observed irrespective of the organ under investigation (i.e. stem, petiole or leaf) or the intensity of drought.

CONCLUSIONS

Our data provide evidence for a hydraulic pathway from the leaf surface to the stem xylem following a water potential gradient, but this pathway exists only in functional vessels and does not play a role in embolism repair for beech.

Development and characterization of a predictive microCT-based non-union model in Fischer F344 rats

INTRODUCTION

Non-unions remain a clinical problem and are characterised by the failure to heal after a defined period of time. Current preclinical non-union models apply a wide variety of techniques to diminish intrinsic healing potential deviating from the clinical situation. The aim of this study was to develop and characterise a non-union model in rats using internal plate fixation without the need for additional healing insults, whereby bone healing can be longitudinally assessed using microCT. It was hypothesized that healing/non-unions can be accurately predicted at early time points by microCT.

MATERIALS AND METHODS

Female, skeletally mature Fischer F344 rats received a 2 mm or 1 mm femoral osteotomy, stabilized with either a 2 mm thick plate or a 1.25 mm thick plate. Healing was monitored by microCT over 14 weeks and histological analysis at euthanasia. The mechanical environment was characterised using finite element (FE) modelling and biomechanical testing.

RESULTS

The majority of animals receiving the 2 mm thick plate displayed poor healing responses in both the 2 mm and 1 mm defect size groups. Bone and cartilage formation were markedly improved using the 1.25 mm thick plate. MicroCT could accurately predict bone forming capacity at early time points (3-4 weeks).

CONCLUSIONS

The 2 mm thick plating system confers poor healing responses in female Fischer F344 rats, comparable to atrophic non-unions. By reducing plate thickness to increase interfragmentary strain within the defect site healing is improved, leading to borderline healing situations or increased abundance of cartilage tissue present in the defect site with ultimate failure to bridge the defect (hypertrophic non-union). Furthermore, microCT can reliably identify delayed/non-healing animals within 4 weeks, thereby allowing their selective targeting for the testing of novel, clinically relevant treatment strategies in different clinical situations aimed at restoring impaired bone healing.

The relative contribution of bone microarchitecture and matrix composition to implant fixation strength in rats

Bone microarchitectural parameters significantly contribute to implant fixation strength but the role of bone matrix composition is not well understood. To determine the relative contribution of microarchitecture and bone matrix composition to implant fixation strength, we placed titanium implants in 12-week-old intact Sprague-Dawley rats, ovariectomized-Sprague-Dawley rats, and Zucker diabetic fatty rats. We assessed bone microarchitecture by microcomputed tomography, bone matrix composition by Raman spectroscopy, and implant fixation strength at 2, 6, and 10 weeks postimplantation. A stepwise linear regression model accounted for 83.3% of the variance in implant fixation strength with osteointegration volume/total volume (50.4%), peri-implant trabecular bone volume fraction (14.2%), cortical thickness (9.3%), peri-implant trabecular crystallinity (6.7%), and cortical area (2.8%) as the independent variables. Group comparisons indicated that osseointegration volume/total volume was significantly reduced in the ovariectomy group at Week 2 (~28%) and Week 10 (~21%) as well as in the diabetic group at Week 10 (~34%) as compared with the age matched Sprague-Dawley group. The crystallinity of the trabecular bone was significantly elevated in the ovariectomy group at Week 2 (~4%) but decreased in the diabetic group at Week 10 (~3%) with respect to the Sprague-Dawley group. Our study is the first to show that bone microarchitecture explains most of the variance in implant fixation strength, but that matrix composition is also a contributing factor. Therefore, treatment strategies aimed at improving bone-implant contact and peri-implant bone volume without compromising matrix quality should be prioritized.

Human semicircular canal form: Ontogenetic changes and variation of shape and size

The semicircular canals (SCCs) transduce angular acceleration of the head into neuronal signals, and their morphology has been used to infer function. Once formed, the bony labyrinth, that surrounds the canals, is tightly regulated and has a very low bone turnover. However, relaxed postnatal inhibition of bone remodelling later in ontogeny may allow for some organised adjustments of shape and size or for greater stochastic variation. In the present study, we test the hypotheses that after birth, the shape and size of the bony canal changes or becomes more variable, or both. We study microCT scans of human perinatal and adult temporal bones using a combination of geometric morphometric analysis and cross-sectional measures. Results revealed marginal differences of size (<5%), of cross-sectional shape and of measurement variability. Geometry of the three canals together and their cross-sectional areas were, however, indistinguishable between perinates and adults. These mixed findings are indicative of diminutive levels of relaxed inhibition superimposed over a constrained template of SCC morphology.

3D printed carboxymethyl cellulose scaffolds for autologous growth factors delivery in wound healing

This work aims to use carboxymethyl cellulose (CMC) as main structural and functional component of 3D printed scaffolds for healing of diabetic wounds. Differently from previous inks involving small contents in CMC, herein sterile (steam-heated) concentrated CMC solely dispersions (10-20%w/v) were screened regarding printability and fidelity properties. CMC (15%w/v)-citric acid inks showed excellent self-healing rheological properties and stability during storage. CMC scaffolds loaded with platelet rich plasma (PRP) sustained the release of relevant growth factors. CMC scaffolds both with and without PRP promoted angiogenesis in ovo, stem cell migration in vitro, and wound healing in a diabetic model in vivo. Transparent CMC scaffolds allowed direct monitoring of bilateral full-thickness wounds created in rat dorsum. CMC scaffolds facilitated re-epithelialization, granulation, and angiogenesis in full-thickness skin defects, and the performance was improved when combined with PRP. Overall, CMC is pointed out as outstanding component of active dressings for diabetic wounds.

Infiltration of subcutaneous adipose layer into the dermal layer with aging

BACKGROUND

The elasticity of the dermal layer decreases with aging, leading to ulcer formation and wrinkling, but the mechanism of this change is not fully understood, because it is difficult to access the complex three-dimensional (3D) internal structure of the dermis.

OBJECTIVE

To clarify age-dependent changes in the overall 3D structure of the dermal layer by means of 3D analysis technology.

METHODS

We observed sun-protected human skin by means of X-ray micro CT, identified the layers of the skin, and reconstructed the 3D structure on computer. Age-dependent structural changes of the dermal layer were evaluated by statistical comparison of young and aged skin.

RESULTS

Histological observations suggested the presence of two types of ectopic fat deposits, namely infiltrated subcutaneous fat and isolated fat, in the lower region of the reticular dermal layer in aged skin. To elucidate their nature, we observed skin specimens by X-ray microCT. The epidermis, dermal layer, and subcutaneous adipose layer were well differentiated on CT images, and 3D skin was digitally reconstructed on computer. This method clearly showed that the isolated fat observed histologically was in fact connected to the subcutaneous fat, namely all ectopic fat is connected to the subcutaneous adipose layer. Statistical analysis showed that the severity of fat infiltration into dermal layer is significantly increased in aged skin compared with young skin.

CONCLUSION

Our findings indicate that subcutaneous fat infiltrates into the dermal layer of aged skin. Our 3D analysis approach is advantageous to understand changes of complex internal skin structures with aging.

Time course changes to structural, mechanical and material properties of bone in rats after complete spinal cord injury

OBJECTIVE

Characterise the spatiotemporal trabecular and cortical bone responses to complete spinal cord injury (SCI) in young rats.

METHODS

8-week-old male Wistar rats received T9-transection SCI and were euthanised 2-, 6-, 10- or 16-weeks post-surgery. Outcome measures were assessed using micro-computed tomography, mechanical testing, serum markers and Fourier-transform infrared spectroscopy.

RESULTS

The trabecular and cortical bone responses to SCI are site-specific. Metaphyseal trabecular BV/TV was 59% lower, characterised by fewer and thinner trabeculae at 2-weeks post-SCI, while epiphyseal BV/TV was 23% lower with maintained connectivity. At later-time points, metaphyseal BV/TV remained unchanged, while epiphyseal BV/TV increased. The total area of metaphyseal and mid-diaphyseal cortical bone were lower from 2-weeks and between 6- and 10-weeks post-SCI, respectively. This suggested that SCI-induced bone changes observed in the rat model were not solely attributable to bone loss, but also to suppressed bone growth. No tissue mineral density differences were observed at any time-point, suggesting that decreased whole-bone mechanical properties were primarily the result of changes to the spatial distribution of bone.

CONCLUSION

Young SCI rat trabecular bone changes resemble those observed clinically in adult and paediatric SCI, while cortical bone changes resemble paediatric SCI only.

Reproducibility of Densitometric and Biomechanical Assessment of the Mouse Tibia From In Vivo Micro-CT Images

Interventions for bone diseases (e.g. osteoporosis) require testing in animal models before clinical translation and the mouse tibia is among the most common tested anatomical sites. In vivo micro-Computed Tomography (microCT) based measurements of the geometrical and densitometric properties are non-invasive and therefore constitute an important tool in preclinical studies. Moreover, validated micro-Finite Element (microFE) models can be used for predicting the bone mechanical properties non-invasively. However, considering that the image processing pipeline requires operator-dependant steps, the reproducibility of these measurements has to be assessed. The aim of this study was to evaluate the intra- and inter-operator reproducibility of several bone parameters measured from microCT images. Ten in vivo microCT images of the right tibia of five mice (at 18 and 22 weeks of age) were processed. One experienced operator (intra-operator analysis) and three different operators (inter-operator) aligned each image to a reference through a rigid registration and selected a volume of interest below the growth plate. From each image the following parameters were measured: total bone mineral content (BMC) and density (BMD), BMC in 40 subregions (ten longitudinal sections, four quadrants), microFE-based stiffness and failure load. Intra-operator reproducibility was acceptable for all parameters (precision error, PE < 3.71%), with lowest reproducibility for stiffness (3.06% at week 18, 3.71% at week 22). The inter-operator reproducibility was slightly lower (PE < 4.25%), although still acceptable for assessing the properties of most interventions. The lowest reproducibility was found for BMC in the lateral sector at the midshaft (PE = 4.25%). Densitometric parameters were more reproducible than most standard morphometric parameters calculated in the proximal trabecular bone. In conclusion, microCT and microFE models provide reproducible measurements for non-invasive assessment of the mouse tibia properties.