Increased long-term survival of posterior cruciate-retaining versus posterior cruciate-stabilizing total knee replacements

Minimum 19-Year Clinical Results and Patient Satisfaction After Total Knee Arthroplasty

BACKGROUND

Long-term (minimum 19-year) outcome data on clinical results and patient satisfaction after posterior-stabilized total knee arthroplasties (TKAs) are missing in the literature. The purpose of the study was to evaluate the clinical and radiographic results as well as patient satisfaction at a mean of 21.2 years after posterior-stabilized TKAs.

METHODS

This study included 756 patients (1,350 knees) who had undergone TKAs. There were 96 men and 660 women (mean age, 58 years; range, 40 to 84). The mean follow-up was 21.2 years (range, 19 to 23). At each follow-up visit, the patients were assessed radiographically and clinically. Furthermore, patient satisfaction was determined.

RESULTS

The Knee Society total, pain, function, and deformity scores were 42, 18, 33, and 5 points, respectively, at the final follow-up. The mean Western Ontario and McMaster Universities Arthritis Index score was 25 points at the final follow-up. With revision or aseptic loosening as the end point, the 23-year intimated survival for the implant was 96% (95% confidence interval, 91 to 100%). The overall patient satisfaction score at the final follow-up was 83.3 points (range, 81 to 86). Patient satisfaction scores with regard to pain, housework, recreation, and surgery were 84, 81, 82, and 86 points, respectively.

CONCLUSIONS

The findings of the present, mean 21-year follow-up clinical study suggest excellent results with regard to the revision rates and survivorship of the posterior-stabilized total knee implants. However, consistent with the literature, we found that about 80% of patients expressed overall satisfaction with their primary TKAs. About 8% of patients were either somewhat or very dissatisfied with the procedure.

Global mapping of institutional and hospital-based (Level II-IV) arthroplasty registries: a scoping review

PURPOSE

Four joint arthroplasty registries (JARs) levels exist based on the recorded data type. Level I JARs are national registries that record primary data. Hospital or institutional JARs (Level II-IV) document further data (patient-reported outcomes, demographic, radiographic). A worldwide list of Level II-IV JARs must be created to effectively assess and categorize these data.

METHODS

Our study is a systematic scoping review that followed the PRISMA guidelines and included 648 studies. Based on their publications, the study aimed to map the existing Level II-IV JARs worldwide. The secondary aim was to record their lifetime, publications' number and frequency and recognise differences with national JARs.

RESULTS

One hundred five Level II-IV JARs were identified. Forty-eight hospital-based, 45 institutional, and 12 regional JARs. Fifty JARs were found in America, 39 in Europe, nine in Asia, six in Oceania and one in Africa. They have published 485 cohorts, 91 case-series, 49 case-control, nine cross-sectional studies, eight registry protocols and six randomized trials. Most cohort studies were retrospective. Twenty-three per cent of papers studied patient-reported outcomes, 21.45% surgical complications, 13.73% postoperative clinical and 5.25% radiographic outcomes, and 11.88% were survival analyses. Forty-four JARs have published only one paper. Level I JARs primarily publish implant revision risk annual reports, while Level IV JARs collect comprehensive data to conduct retrospective cohort studies.

CONCLUSIONS

This is the first study mapping all Level II-IV JARs worldwide. Most JARs are found in Europe and America, reporting on retrospective cohorts, but only a few report on studies systematically.

Complications of Bicruciate-Retaining Total Knee Arthroplasty: The Importance of Alignment and Balance

Bicruciate-retaining total knee arthroplasty (BCR TKA) results in kinematics closer to the native knee and in greater patient satisfaction but information concerning its outcome and complications is lacking.The goal of this study is to report the clinical and radiological outcomes of BCR prosthesis implanted using a spacer-based gap balancing technique and to assess if some preoperative factors are associated with a worse prognosis.A cohort of 207 knees in 194 patients who underwent BCR TKA, with a minimum 1-year follow-up, was retrospectively analyzed.Patients were followed at 6 weeks, 6 months, 1 year, and then every following year postoperatively, and filled questionnaires (Knee Society and Knee injury and Osteoarthritis Outcome Score) at every visit. Clinical and radiological assessments included range of motion, knee alignment, pain, and complications as defined by the Knee Society's Standardized list and definition of Complication of Total Knee Arthroplasty.Forty-three knees (20.8%) suffered major complications. Twenty-one knees (10.1%) underwent revision at an average of 32.1 months after the index procedure. Revision-free survival at 100 months was 85.7%. Revision was performed for aseptic tibial loosening in eight knees (3.9%) and stiffness in five knees (2.4%). There were 29 reoperations other than revision (14.0%), the most frequent procedure being manipulation under anesthesia in 14 knees (6.8%). Minor complications included tendonitis (20.8%), persistent synovitis (6.8%), and superficial wound infections (6.3%).All outcomes scores were greatly improved at the 1-year follow-up compared with preoperatively (p < 0.001). However, maximum flexion at the last follow-up was significantly reduced compared with preoperatively (mean maximum flexion ± standard deviation: 119.9 ± 15.6 vs. 129.9 ± 14.4, p < 0.001). Aseptic tibial loosening was associated with a hypercorrection in varus of preoperative valgus knees (p = 0.012).BCR TKA can give functional results similar to other types of prostheses but involves a substantial risk of complications. Important factors that can explain failed BCR TKA and guide its use were identified, more particularly knee alignment and its role in aseptic tibial loosening.

Higher rates of fully preserved posterior cruciate ligament in total knee arthroplasty using a double tibial cut: a prospective randomized controlled trial

PURPOSE

In cruciate retaining total knee arthroplasty, posterior cruciate ligament damage may occur during tibial cutting. A prospective randomized study was conducted to investigate whether a novel tibial cutting technique was more effective than the currently used techniques.

MATERIALS AND METHODS

Patients undergoing cruciate retaining total knee arthroplasty were recruited in a prospective, randomized, controlled trial. In 25 patients (group 1) the tibial cut was performed using a double tibial cut technique; in 25 (group 2) and 25 (group 3) patients, the bone island and en bloc resection techniques were performed, respectively. Posterior cruciate ligament integrity and femoral rollback were assessed at the end of surgery. The Oxford Knee Score, WOMAC score and range of motion were assessed postoperatively.

RESULTS

Posterior cruciate ligament was completely preserved in 92% of patients in group 1 and in 64% in group 2 and 3, respectively (p = 0.03). The Oxford Knee Score and WOMAC scores did not differ between groups (p = 0.4). The mean knee flexion was 126.4°, 121.5° and 123.9° in groups 1, 2 and 3, respectively (p = 0.04). The femoral rollback at 120° flexion was 80.7%, 72.2% and 75.4% in groups 1, 2 and 3, respectively (p = 0.01).

CONCLUSIONS

The double cut technique preserves the posterior cruciate ligament at significantly higher rates than the bone island or en bloc resection techniques. Better posterior cruciate ligament preservation may improve the femoral rollback and knee flexion.

LEVEL OF EVIDENCE

Prospective randomized controlled trial, Level I.

Increased risk of aseptic loosening for posterior stabilized compared with posterior cruciate-retaining uncemented total knee replacements: a cohort study of 13,667 knees from the Dutch Arthroplasty Registry

BACKGROUND AND PURPOSE

While registry studies have suggested a higher risk of revision for posterior-stabilized (PS) compared with posterior cruciate-retaining (CR) total knee replacements (TKR) using cement, it is unknown whether this is also the case for uncemented TKR. We aimed to compare the revision rates of PS and CR designs in patients receiving primary uncemented TKR.

PATIENTS AND METHODS

Data from the Dutch arthroplasty register (LROI) was analyzed, comprising 12,226 uncemented primary CR TKRs and 750 uncemented PS TKRs registered between 2007 and 2022. Competing risk and multivariable Cox regression analyses were used to compare revision rates, risks of revision, and reasons for revision between groups. Sensitivity analyses were performed to analyze the risk, concerning the 5 most commonly used implants and performing hospitals for each group.

RESULTS

Uncemented PS TKRs had higher 10-year revision rates for any reason and aseptic loosening (6.5%, 95% confidence interval [CI] 4.6-9.2 and 3.9%, CI 2.6-6.7) compared with uncemented CR TKRs (4.2%, CI 3.8-4.7 and 1.4%, CI 1.2-1.7). PS TKRs were 1.4 and 2.5 times more likely to be revised for any reason and aseptic loosening, respectively. These results remained consistent after adjustment for age, sex, BMI, previous surgeries, bearing mobility, and surface modification, with sensitivity analyses.

CONCLUSION

We found that uncemented PS implants have a higher rate of revision than uncemented CR implants, mainly due to a higher risk of aseptic loosening.

Early- to Mid-Term Review of a Prospective, Multi-Center, International, Outcomes Study of an Anatomically Designed Implant with Posterior-Stabilized Bearing in Total Knee Arthroplasty

Background and Objectives: National joint registries report higher total knee arthroplasty (TKA) revision rates in posterior-stabilized (PS) systems compared to non-posterior-stabilized designs. The purpose of this study was to investigate the implant survivorship and clinical outcomes of an anatomic implant with a PS bearing. Materials and Methods: An early- to mid-term follow-up of a prospective, multi-center, non-controlled outcomes study of patients who received primary TKA between November 2014 and June 2017 was performed. A total of 800 cases using PS bearings that were implanted in 664 patients were monitored post-operatively for their implant survivorship and adverse events for up to five years. The Knee Society Knee and Function scores, patient satisfaction, the five-dimensional European Quality of Life questionnaire, and range of motion (ROM) were evaluated pre-operatively and post-operatively at six weeks, six months, one year, two years, three years, and five years. Results: The mean follow-up period was 3.7 ± 1.3 years, and the three-year implant survival rate was 99.3% (95% CI: 98.4%, 99.7%) with five revisions during the five-year follow-up. Patient satisfaction was 96.1% at six weeks and increased to 99.3% at one year. All patient-reported outcome measures significantly (p < 0.0001) increased up to the one-year follow-up and then remained stable up to the five-year follow-up. Conclusions: This study supports the excellent survivorship and patient-reported outcomes of the Persona® Knee system using cemented, fixed bearing, posterior-stabilized components with minimal complications at early- to mid-term follow-up in an international Asian population. Ongoing observations are being performed to investigate the mid- to long-term survivorship and clinical outcomes associated with this knee system.

Cruciate-Retaining Total Knee Arthroplasty: Current Concepts Review

Posterior cruciate-retaining (CR) total knee arthroplasty for osteoarthritis of the knee is a popular implant choice. At present, there is no consensus on whether sacrifice or retention of the posterior cruciate ligament (PCL) offers superior outcomes. This review explores the current literature available on CR total knee arthroplasty (TKA). PubMed was searched by keyword to find relevant articles for inclusion. Additional sources came from article references and joint registry reports. CR design knees have distinct kinematic gait patterns from posterior-stabilizing (PS) knees and exhibit paradoxical anterior femoral movement with less femoral rollback. While CR implants offer less flexion than PS designs, the difference is not clinically detectable as clinical scores are similar in the short and long term. CR implants have better long-term survival compared to PS knees, likely due to lower risk of aseptic loosening. CR total knee arthroplasties also have shorter operating times and lower risk of peri-prosthetic fractures. Because the CR implant is unconstrained, there may be an increased risk of instability compared to PS designs, but the literature is mixed. Overall, the current literature supports the continued use of CR TKAs due to their lower risk of complications, durability, and demonstrated equivalence in function to posterior-substituting models.

Total Knee Arthroplasty in Patients Who had a Prior Anterior Cruciate Ligament Reconstruction: Balancing Remains the Issue

BACKGROUND

Following anterior cruciate ligament (ACL) injury, 20% of patients will develop osteoarthritis. Despite this, there remains a paucity of data describing outcomes of total knee arthroplasty (TKA) after prior ACL reconstruction. We aimed to describe survivorships, complications, radiographic results, and clinical outcomes of TKA after ACL reconstruction in one of the largest series to date.

METHODS

We identified 160 patients (165 knees) who underwent primary TKA following prior ACL reconstruction between 1990 and 2016 using our total joint registry. The mean age at TKA was 56 years (range, 29-81), 42% were women, and their mean body mass index was 32. Ninety percent of knees were posterior-stabilized designs. Survivorship was assessed using the Kaplan-Meier method. The mean follow-up was 8 years.

RESULTS

The 10-year survivorships free of any revision and any reoperation were 92 and 88%, respectively. Seven patients were revised for instability (6 global and 1 flexion), 4 for infection, and 2 for other reasons. There were 5 additional reoperations: 3 manipulations under anesthesia, 1 wound debridement, and 1 arthroscopic synovectomy for patellar clunk. Nonoperative complications occurred in 16 patients, 4 of which were flexion instability. Radiographically, all nonrevised knees were well-fixed. Knee Society Function Scores significantly improved from preoperative to 5 years postoperative (P < .0001).

CONCLUSION

Survivorship of TKA in post-ACL reconstruction knees was lower than expected with instability being the most common reason for revision. In addition, the most common nonrevision complications were flexion instability and stiffness requiring manipulations under anesthesia, indicating that achieving soft tissue balance in these knees may be difficult.

Modern Total Knee Arthroplasty Bearing Designs and the Role of the Posterior Cruciate Ligament

The role of the posterior cruciate ligament (PCL) in total knee arthroplasty (TKA) surgery continues to be a source of debate among the adult reconstruction community. In native knee flexion, the PCL is comprised of an anterolateral and posteromedial bundle that work together to limit posterior tibial translation and allow adequate femoral rollback for deep flexion. In the arthritic knee, the PCL can often become dysfunctional and attenuated, which led to the development of posterior stabilized (PS) TKA bearing options. PS TKAs implement a cam-post construct to functionally replace a resected PCL. While PS designs may facilitate balancing knees with significant deformity, they are associated with complications such as postfracture, increased wear, and patellar clunk/crepitus. In recent years, newer designs have been popularized with greater degrees of congruency and incorporation of medial and lateral pivoting to better recreate native knee kinematics. The American Joint Registry has confirmed the recent predilection for ultra-congruent and cruciate-retaining TKA inserts over PS TKAs during the last decade. Studies have failed to identify an overall clinical superiority between the cruciate substituting and sacrificing designs. The literature has also failed to identify clinical consequences from PCL resection with modern, more conforming TKA designs. In this article, we review modern PCL sacrificing designs and discuss the impact of each on the kinematics after TKA. We also will delineate the role of the PCL in modern TKA in the hopes to better understand the recent surge in sacrificing but not substituting knee implants.

Effect of posterior cruciate ligament on knee pressure and gap measured by an electronic sensor during total knee arthroplasty

PURPOSE

The purpose of this study was to evaluate the change in posterior cruciate ligament (PCL) tension by directly measuring the pressure changes in the knee joint when the ligament was released or resected during total knee arthroplasty.

METHODS

We prospectively analyzed 54 patients who underwent primary total knee arthroplasty (67 knees) from October 2019 to January 2022. An electronic pressure sensor was used to measure the pressure changes in the medial and lateral chambers on PCL retention, recession or resection.

RESULTS

At 0°, 45°, 90° and 120° of flexion, the total pressure in the knee joint of PCL retention was significantly higher than with PCL recession, and even higher than PCL resection. PCL recession or resection affected knee joint extension, and the medial/lateral pressure in the knee joint decreased. Pressure in the lateral compartment showed no significant change during knee flexion, whereas pressure in the medial compartment was significantly decreased, which also led to a change in the ratios of the medial and lateral pressures in the knee joint. After PCL resection, the flexion gap (90°) increased significantly more than the extension (0°) gap, while 46 cases displayed the same change in the flexion and extension gaps after PCL resection of the 67 cases.

CONCLUSION

The PCL retained partial function after tibial recession. PCL resection affected both the flexion and extension gaps; although the average flexion gap increased more than the extension gap, the change in most cases of these two gaps was the same.

Total knee replacement survivorship by Design Philosophy: are we ignoring medial pivot design? Analysis based on the UK National Joint Registry

The UK National Joint Registry(NJR) has not reported total knee replacement (TKR) survivorship based on design phi- losophy alone, unlike its international counterparts. We report outcomes of implant survivorship based on design phi- losophy using data from NJR's 2020 annual report. All TKR implants with an identifiable design philosophy from NJR data were included. Cumulative revision data for cruciate-retaining(CR), posterior stabilised(PS), mobile-bearing(MB) design philosophies was derived from merged NJR data. Cumulative revision data for individual brands of implants with the medial pivot (MP) philosophy were used to calculate overall survivorship for this design philosophy. The all-cause revision was used as the endpoint and calculated to 15 years follow-up with Kaplan-Meier curves. 1,144,384 TKRs were included. CR is the most popular design philosophy (67.4%), followed by PS(23.1%), MB (6.9%) and least commonly MP (2.6%). MP and CR implants showed the best survivorship (95.7% and 95.6% respectively) at 15 years which is statistically significant at, and beyond, 10 years. Observed survivorship was lower at all time points with the PS and MB implants (94.5% for both designs at 15 years). While all design philosophies considered in this study survive well, CR and MP designs offer statistically superior survivorship at and beyond 10 years. MP design performs better than CR beyond 13 years yet, remain the least popular design philosophy used. Publishing data based on knee arthroplasty design phi- losophy would help surgeons when making decisions on implant choice.

Cruciate retaining total knee arthroplasty has a better 10 year survival than posterior stabilized total knee arthroplasty: a systematic review and meta-analysis

PURPOSE

There has been a long standing debate regarding superiority of cruciate retaining total knee arthroplasty over posterior stabilized total knee arthroplasty regarding the short-term outcomes as well as long-term survivorship. The proponents of both the techniques have published vast evidence in favor of their respective surgical method and early outcome in meta-analyses does not seem to be significantly different. The decision to select either design should depend on their long-term survivorship but the literature comparing their long-term survival is sparse.This meta-analysis was conducted in order to answer the following questions: (1) Does cruciate retaining total knee arthroplasty has a better long-term survival beyond 10 years.compared to posterior stabilized total knee arthroplasty? (2) Does cruciate retaining knee arthroplasty has higher complication rates compared to posterior stabilized total knee arthroplasty?

METHODS

The present systematic review and meta-analysis study was carried out following PRISMA guidelines. The following databases: Embase, Web of Science, PubMed, Scopus, the Cochrane Library, Google Scholar, and CINAHL were used to search potentially interesting articles published from database inception until January 2022. Inclusion criteria for articles were: (1) retrospective comparative studies; (2) patients who had undergone a total knee arthroplasty; (3) publications evaluating the long-term survival of cruciate-retaining (CR) versus posterior stabilizing (PS) at a minimum 10 years' follow-up; (4) publications evaluating complications of cruciate-retaining (CR) versus posterior stabilizing (PS) at a minimum 10 years' follow-up; and (5) publications reporting sufficient data regarding the outcomes. We used a fixed-effects design in the case of I² < 50% and P > 0.05; if not, we adopted a random-effects design [4]. We also performed subgroups and sensitivity analysis in order to assess the possible source of heterogeneity.

RESULTS

Database searching identified 597 studies to be screened, of which 291 abstracts were revealed as potentially eligible and finally 7 articles were included. The forest plot showed that CR had significantly better survival than PS (OR = 2.17; 95% CI: 1.69-2.80) after 10 years. However, complication rate was not significantly different between CR and PS groups (OR = 0.86; 95% CI: 0.52-1.44; P = 0.57). Subgroup analysis showed that only the period of publication constituted a source of heterogeneity in survivorship outcome. Sensitivity analysis revealed that outcomes did not differ markedly, which indicates that the meta-analysis had strong reliability.

CONCLUSION

The results of this meta-analysis showed that cruciate retaining prosthesis may be preferred over the posterior stabilized design in view of longer survivorship it offers However, further randomized controlled trials are recommended to confirm this finding.

Early Aseptic Loosening with Increased Presence and Severity of Backside Burnishing in the Optetrak Logic Posterior-Stabilized Total Knee Arthroplasty Femoral Component

Concerns persist that the Optetrak Logic posterior-stabilized (PS) total knee arthroplasty (TKA) femoral component might correlate with early failures due to aseptic loosening. The primary aim of this study was to examine if the use of the Optetrak Logic PS femoral component is associated with early (<5 years) and more extensive aseptic loosening compared with other PS femoral components. This is a single-institution retrieval analysis and revision registry study (based on prospectively collected data) of 27 failed primary PS TKA patients with loose femoral components that underwent revision TKAs between 2016 and 2019. Patients were stratified by components type: Group A (n = 16) received the Optetrak Logic PS femoral component, while Group B (n = 11) received other PS femoral components. Burnishing (macroscopic polishing of the component's backside) was observed and graded as a marker for relative motion at the cement-implant interface. No significant differences were found between the two groups regarding the baseline demographic, radiographic, and clinical characteristics. Mean length of implantation for Group A (3.8 ± 2.9 years) was significantly shorter (p < 0.001) than that of Group B (12.0 ± 6.7 years). A significant difference (p = 0.009) was found in presence of backside femoral burnishing between Group A (15 of 16 patients; 93.8%) and group B (5 of 11 patients; 45.6%). Furthermore, we found a significant difference (p < 0.001) in the severity of burnishing between Group A (13 of 16 patients with severe degree of burnishing; 81.3%) and Group B (1 of 11 patients with severe degree of burnishing; 9.1%). In contrast to Group B, a distinctive macroscopic pattern found in Logic retrieved femoral components (Group A) was the total absence of cement in the backside surface. The use of the Optetrak Logic PS TKA femoral component was associated with early aseptic loosening and increased presence and severity of backside burnishing with early cement-implant interface debonding compared with other commercially available types of PS TKA femoral components. The earlier failure rate with this implant is of concern.

Polyethylene Components in Primary Total Knee Arthroplasty: A Comprehensive Overview of Fixed Bearing Design Options

The articular design of a polyethylene insert influences the kinematics and overall function of a total knee arthroplasty (TKA). Standard symmetric posterior-stabilized and cruciate-retaining polyethylene designs have a long track record of high patient satisfaction and longevity in TKA. However, the number and variety of polyethylene inserts and articulations have continued to evolve in an attempt to better replicate native knee kinematics or provide additional constraint. Ultracongruent polyethylene designs have been touted as increasing stability while maintaining the benefits of cruciate-retaining knees. Medial pivot and lateral/dual pivot polyethylene designs were introduced to mimic more normal knee kinematics with regard to femoral rollback. Further, with increasing recognition of knee instability as a cause for persistent symptoms and revision TKA, the utilization of midlevel constraint polyethylene inserts has been increasing, with multiple implant companies offering an insert design with increased constraint for use with a primary femoral component. In this rapidly evolving arena in with a myriad of options available, surgeons should be knowledgeable about the design concepts and their applicable uses for specific patient scenarios. Future research is needed to better understand whether a particular type or design of polyethylene insert and articulation leads to improved patient reported outcomes, improved replication of knee kinematics, and long-term durable implant survivorship.

Revision Risk for Total Knee Arthroplasty Polyethylene Designs in Patients 65 Years of Age or Older: An Analysis from the American Joint Replacement Registry

BACKGROUND

Polyethylene bearing design may influence the risk of revision after total knee arthroplasty (TKA). Previous investigations from outside of the United States have suggested the potential for an increased risk of all-cause revision and revision for infection with the use of posterior-stabilized bearings. We examine the risk of revision based on the polyethylene bearing design selection for primary TKA.

METHODS

An analysis of the American Joint Replacement Registry (AJRR) data from 2012 to 2019 was performed. We identified all primary TKAs over the study period and linked cases to supplemental U.S. Centers for Medicare & Medicaid Services (CMS) data where available. Patient demographic characteristics, polyethylene characteristics, procedure dates, and cause for revision were recorded. Analysis was performed to compare minimally stabilized implants (cruciate-retaining, anterior-stabilized, or pivot bearing designs) with posterior-stabilized implants. Cumulative incidence function (CIF) curves and Cox proportional hazard ratios (HRs) were created for all-cause revision and revision for infection in each group.

RESULTS

We identified 305,279 cases with reported minimally stabilized or posterior-stabilized implant characteristics. There were 161,486 cases (52.9%) that utilized posterior-stabilized bearings compared with 143,793 cases (47.1%) with minimally stabilized bearings. For minimally stabilized bearings, 1,693 cases (1.18%) had all-cause revision and 334 cases (0.23%) had revision for infection. For posterior-stabilized bearings, 2,406 cases (1.49%) had all-cause revision and 446 cases (0.28%) had revision for infection. The use of posterior-stabilized bearings had HRs of 1.25 (95% confidence interval [CI], 1.2 to 1.3; p < 0.0001) for all-cause revision and 1.18 (95% CI, 1.0 to 1.4; p = 0.02) for revision for infection.

CONCLUSIONS

Similar to investigations from international registries, we found an increased risk of all-cause revision and revision for infection when using posterior-stabilized bearings in TKA in the United States. Surgeons should consider this finding when considering bearing selection for primary TKA.

LEVEL OF EVIDENCE

Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

The Effect of Working Time and Application Technique on Cement Penetration into a Tibial Model

Background

Aseptic loosening of the cemented tibial component is a source of failure in total knee arthroplasty. This study examined common techniques for cement application by quantifying depth and volume of penetration into tibia models.

Material and methods

Thirty-six composite tibia models were cemented with a tibial component using 3 application techniques (gun, osteotome, and layered) with either early or late cement working time. Computed tomography and 3D-modeling were used to quantify volume and depth of penetration. Statistical analysis was conducted with analysis of variance with Bonferroni correction and Student’s t-test.

Results

No difference was found in overall volume of penetration between early and late cement application (P = .16). Beneath the baseplate, the layered technique had significantly less penetration and averaged less than 3 mm with early and late cement. The gun technique had the greatest depth of penetration with early cement and averaged greater than 3 mm in all zones regardless of cement working time. The osteotome technique achieved significantly greater depth of penetration around the keel with early and late cement, P < .01.

Conclusions

Using a cement gun ensures adequate penetration beneath the baseplate regardless of cement working time while the osteotome technique is effective to increase penetration around the implant keel. According to our study, applying cement early in its working time may not increase volume of penetration. This study raises concern regarding adequate cement penetration using the layered technique for cementing the tibial component in total knee arthroplasty, and future research is warranted.

Involvement of NF-κB/NLRP3 axis in the progression of aseptic loosening of total joint arthroplasties: a review of molecular mechanisms

Particulate wear debris can trigger pro-inflammatory bone resorption and result in aseptic loosening. This complication remains major postoperative discomforts and complications for patients who underwent total joint arthroplasty. Recent studies have indicated that wear debris-induced aseptic loosening is associated with the overproduction of pro-inflammatory cytokines. The activation of osteoclasts as a result of inflammatory responses is associated with osteolysis. Moreover, stimulation of inflammatory signaling pathways such as the NF-κB/NLRP3 axis results in the production of pro-inflammatory cytokines. In this review, we first summarized the potential inflammatory mechanisms of wear particle-induced peri-implant osteolysis. Then, the therapeutic approaches, e.g., biological inhibitors, herbal products, and stem cells or their derivatives, with the ability to suppress the inflammatory responses, mainly NF-κB/NLRP3 signaling pathways, were discussed. Based on the results, activation of macrophages following inflammatory stimuli, overproduction of pro-inflammatory cytokines, and subsequent differentiation of osteoclasts in the presence of wear particles lead to bone resorption. The activation of NF-κB/NLRP3 signaling pathways within the macrophages stimulates the production of pro-inflammatory cytokines, e.g., IL-1β, IL-6, and TNF-α. According to in vitro and in vivo studies, novel therapeutics significantly promoted osteogenesis, suppressed osteoclastogenesis, and diminished particle-mediated bone resorption. Conclusively, these findings offer that suppressing pro-inflammatory cytokines by regulating both NF-κB and NLRP3 inflammasome represents a novel approach to attenuate wear-particle-related osteolytic diseases.

High Survivorship of a Modular Titanium Baseplate Independent of Body Mass Index and Malalignment

BACKGROUND

Tibial component aseptic loosening remains problematic in primary total knee arthroplasty (TKA). Influential factors include component design, metallurgy, and cement technique. Additionally, reports advocate for longer tibial stem fixation in high body mass index (BMI) patients. We have utilized a single stem length modular titanium baseplate in patients regardless of BMI, bone quality, or malalignment. We report the survivorship of this implant with focus on the impact of elevated BMI and postoperative malalignment.

METHODS

We retrospectively reviewed patients who underwent TKA with a single modular titanium baseplate with a cruciate-shaped keel between 2004 and 2018. In total, 2,949 TKAs with a minimum of 1-year follow-up were included. The mean follow-up was 7 years. The primary outcome was component failure stratified by BMI and postoperative malalignment. High viscosity cement was utilized in all cases. Chi-squared and t-tests were used to compare outcome variables across groups.

RESULTS

Eighty-five implants (2.8%) were revised with 46 (1.6%) for aseptic loosening. Failure was not associated with BMI, gender, American Society of Anesthesiologists class, or Charlson Comorbidity Index. There was no difference in failure rate by BMI (P = .26) or by malalignment (outside of 3° from neutral mechanical axis) (P = .67). Age was associated with failure as patients with failed TKAs were younger (61 vs 65, P < .01).

CONCLUSION

This design of a specific modular titanium base plate with a cruciate-shaped keel and grit blast surface demonstrated 99% survivorship regardless of patient BMI or malalignment over 7-year follow-up period. Consistent cement technique with high viscosity cement indicates that component design remains an important variable impacting survivorship in TKA.

Stress Radiograph Confirmation of Translational Instability After Cruciate-Retaining Total Knee Arthroplasty

INTRODUCTION

Late rupture of the posterior cruciate ligament (PCL) in cruciate-retaining total knee arthroplasty (TKA) can lead to increased AP instability. This results in increased stress on the medial hamstrings resulting in hamstring-based pain. We looked to identify patients with late PCL failure using a lateral stress radiograph.

METHODS

A prospective cohort analysis was completed at a single institution. Eligible patients were divided into two groups based on the amount of anterior knee pain. Pain was defined as a visual analog scale of greater than or equal to 3. Each group completed a visual analog scale, Knee Injury and Osteoarthritis Outcome Score Junior, Patient-Reported Outcome Measurement Information System score and underwent a lateral posterior stress/nonstress radiograph. Amount of posterior translation and posterior tibial slope was measured.

RESULTS

Patients who had painful TKAs at the follow-up had lower Knee Injury and Osteoarthritis Outcome Score Junior (45.86 ± 13.52 versus 78.00 ± 13.26 P < 0.001). Those patients were also found to have significantly higher posterior tibial translation with stress radiograph (6.89 ± 1.874 versus 3.91 ± 2.15 mm P < 0.001) and significantly increased tibial slope (6.51 ± 2.37° versus 3.98 ± 1.79°, P = 0.004). Seven of the 14 patients in the pain group underwent revision surgery, with 6 patients found to have incompetent PCLs.

DISCUSSION

Patients with increased AP translation and increased posterior tibial slope after cruciate-retaining TKA are likely to have worse pain and outcome measures.

Robotics versus personalized 3D preoperative planning in total knee arthroplasty: a propensity score-matched analysis

Purpose

Lower limb alignment is crucial in total knee arthroplasty (TKA). Previous studies have shown that robotics and personalized three-dimensional (3D) preoperative planning could improve postoperative alignment accuracy compared with conventional TKA, but comparison between the above two techniques has never been reported. The authors hypothesized that robotics may be superior to personalized 3D preoperative planning in terms of postoperative alignment in primary TKA, with similar patient-reported outcome measures (PROMs) but higher cost and longer operative time.

Methods

A consecutive series of patients who received TKA in our center from September 2020 to January 2021 were enrolled retrospectively. After 1:2 matching, 52 and 104 patients were included and divided into study group for robotics and control group for personalized 3D preoperative planning, respectively. Multiple postoperative alignment angles were measured, and clinical features such as operation and tourniquet time, length of hospital stay and hemoglobin (Hb) were recorded. Knee Society Score (KSS) and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) were used to evaluate clinical results.

Results

Compared with control group, robotics group had significantly lower frontal femoral component angle (FFC) and frontal tibial component angle (FTC) absolute deviation (P < 0.05). It also had less outliers in hip–knee–ankle angle (HKA), FTC, lateral femoral component angle (LFC) and lateral tibial component angle (LTC) (P < 0.05). Hb loss of robotics group was significantly lower than control group (P < 0.001), while the operation and tourniquet time were longer (P < 0.001). There was no significant difference in KSS and WOMAC scores between two groups.

Conclusion

Compared with control group, patients in robotics group had significantly less malalignment, malposition, Hb loss, but similar PROMs. The operations in robotics group spent longer operation time and cost more compared with control group.

Trial registration: The Chinese Clinical Trial Registry, ChiCTR2000036235. Registered 22 August 2020, http://www.chictr.org.cn/showproj.aspx?proj=59300.

Level of evidence

III.

Biomechanics and Outcomes of Modern Tibial Polyethylene Inserts

PURPOSE OF REVIEW

There have been many attempts to use variations in tibial polyethylene design to better recreate normal knee kinematics in the total knee arthroplasty. The goal of this review is to provide an overview of the various types of tibial inserts that exist and review the theoretical mechanics versus what was demonstrated in vivo.

RECENT FINDINGS

Many polyethylene inserts have been attempted to re-create normal knee kinematics, but none have been able to successfully do so. Previously the only two types of inserts were posterior stabilized (PS) and cruciate retaining (CR) polyethylene inserts. Both of these have shown excellent long-term survival but neither has demonstrated native kinematics. Initially, it was thought that retention of the posterior cruciate ligament (PCL) would allow for more native kinematics, but fluoroscopic evidence has shown that the PCL alone cannot accomplish this. Newer inserts try to restore femoral roll back and the screw home mechanism. The bicruciate retaining total knee inserts are having the most "normal" kinematics, suggesting the importance of both the ACL and PCL in knee biomechanics. Modern polyethylene inserts show favorable short-term data with bicruciate retaining inserts having the best kinematics; however, long-term studies are still needed to determine if survivorship and patient outcomes remain favorable.

Survivorship Comparisons of Ultracongruent, Cruciate-Retaining and Posterior-Stabilized Tibial Inserts Using a Single Knee System Design: Results From the Australian Orthopedic Association National Joint Replacement Registry

BACKGROUND

Ultracongruent (UC) tibial inserts can increase knee replacement stability, but how survivorship compares to cruciate retaining (CR) or posterior stabilized (PS) inserts is unclear.

METHODS

Data from a large joint registry were used to calculate the cumulative percent revision of a single popular knee design used with different inserts. There were 67,523 procedures, of which 12,434 were UC, 21,635 CR, and 33,454 PS. Revision rates and reasons for revision were analyzed.

RESULTS

The cumulative percent revision at 18 years was 8.3% for UC, 9.2% for CR, and 8.9% for PS. There was no difference when UC was compared to CR, but PS had a higher risk of revision. Revision reasons were similar.

CONCLUSION

Compared to the CR, an UC insert did not increase revision rates and was actually lower than a PS insert. An UC insert does not compromise long-term total knee arthroplasty survivorship in the Genesis II prosthesis.

The effect of polyethylene thickness on revision rates of contemporary cruciate retaining knee replacements. A registry analysis

BACKGROUND

An attribute that may influence knee replacement survivorship is tibial polyethylene (PE) insert thickness. Previous studies have suggested thin polyethylene made from ultra-high molecular weight polyethylene (UHMWPE) leads to higher rates of revision surgery. This study aimed to determine if modern polyethylene thickness is associated with altered survivorship of primary total knee arthroplasty (TKA) procedures.

METHODS

A retrospective analysis of data from Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) was done on well performing total knee arthroplasty prostheses used in Australia from 1999-2018. Six of the best performing minimally stabilized prostheses were examined and categorized into three PE thickness subgroups: A (≤10 mm), B (11-14 mm) and C (≥15 mm). There were 185,539 TKA procedures, of which 64.3% (n = 119,382) were ≤ 10 mm, 33.5% (n = 62,173) 11-14 mm, and 2.2% (n = 3984) ≥ 15 mm. Differences in revision rates were analysed for all causes, including loosening, wear, and instability.

RESULTS

At 14 years, respective cumulative point revision (CPR) was A: 4.8, B: 4.2 and C: 6.0. The thickest polyethylene group (≥15 mm) had a higher rate of revision for any reason compared to both 11-14 mm and ≤ 10 mm groups. When non-XLPE was analysed the ≤ 10 mm group had higher rates of revision compared to the 11-14 mm group, but this difference was not seen with XLPE.

CONCLUSION

Higher rates of revision were seen overall in the thicker PE group (≥15 mm). This group also had higher rates of revision for loosening, instability, and infection. The use of a thicker insert may be a sign of surgical complexity, but is associated with increased revision.

Infection and periprosthetic fracture are the leading causes of failure after aseptic revision total knee arthroplasty

AIM

The purpose of this study was to clarify the medium to long term survival of aseptic revision total knee arthroplasty (RTKAs) and identify the common modes of failure following RTKAs.

MATERIALS AND METHODS

A multi-center, retrospective study included all aseptic RTKAs performed at three tertiary referral hospitals between 2003 and 2016. Patients were excluded if the revision was for prosthetic joint infection (PJI) or they had previously undergone revision surgery. Minor revisions not involving the tibial or femoral components were also excluded. Demographics, surgical data and post-operative outcomes were recorded and analyzed. Survival analysis was performed and the reasons for revision failure identified.

RESULTS

Of 235 aseptic RTKAs identified, 14.8% underwent re-revision at mean follow-up of 8.3 years. Survivorship of RTKA was 93% at 2 years and 83% at 8 years. Average age at revision was 72.9 years (range 53-91.5). The most common reasons for failure following RTKA were periprosthetic joint infection (PJI) (40%), periprosthetic fracture (25.7%) and aseptic loosening (14.3%). Of those whose RTKA failed, the average survival was 3.33 years (8 days-11.4 years). No demographic or surgical factors were found to influence RTKA survival on univariate or multivariate analysis.

CONCLUSION

PJI and periprosthetic fracture are the leading causes of re-revision surgery following aseptic revision TKA. Efforts to improve outcomes of aseptic revision TKA should focus on these areas, particularly prevention of PJI.

Evaluating Long Term Outcomes and Survivorship of Cruciate Retaining and Sacrificing Knee Replacements Done for Degenerative Arthritis in Patients Under 55 Years

BACKGROUND

Total Knee Arthroplasty (TKA) is the gold standard of treatment for end stage arthritis not responding to conservative treatment. With a recent increase in the younger population presenting with osteoarthritis (OA) we undertook this study to evaluate long-term outcomes and survivorship of TKA in this cohort.

MATERIALS AND METHODS

Our study cohort included 328 patients, < 55 years, with OA, who underwent TKA using Cruciate Retaining (CR), and Posterior Stabilized (PS) implants with a minimum follow up of 15 years. Revision surgery was the end point of our analysis and Kaplan-Meier evaluation of survivorship was measured. Knee Society Scores (KSS) and Range of Motion (ROM) were assessed to evaluate outcomes.

RESULTS

Survivorship of the CR and PS implants with revision as end point, for aseptic loosening was 97.3% and 96%, and revision for all causes was 89.7% and 86.1%, respectively, at 15 years. The outcomes of CR implants were better than the PS cohort in terms of function and survivorship.

CONCLUSION

Long term survivorship and outcome analysis of TKA in patients < 55 years showed good results with excellent survivorship, with both CR and PS implants. The CR cohort demonstrated better long-term survivorship, though the difference was not statistically significant. Deep infection and aseptic loosening were the commonest causes for failure.

Modular Tibial Stem Use and Risk of Revision for Aseptic Loosening in Cemented Primary Total Knee Arthroplasty

BACKGROUND

Modular tibial stem extensions in total knee arthroplasty (TKA) are designed to reduce the risk of aseptic loosening of the tibial base plate. However, these implants add significant cost and an evaluation of their effectiveness in reducing this risk of loosening has not been studied in a large cohort. We sought to evaluate modular tibial stem utilization in primary TKA.

METHODS

We conducted a cohort study using our integrated healthcare system's Total Joint Replacement Registry. Patients who underwent cemented primary TKA were identified (2009-2019). Propensity scores were used to 1:1 match patients without to those with a stem extension. Cox proportional-hazards regression was used to evaluate the risk for revision due to aseptic loosening.

RESULTS

Ten thousand four hundred seventy six TKA with a modular tibial stem were matched to 10,476 TKA without a tibial stem. Stem utilization associated with a lower risk of revision for loosening across all postoperative follow-up (hazard ratio = 0.38, 95% confidence interval = 0.17-0.85).

CONCLUSION

In a matched cohort study, we observed presence of a stem extension was associated with a lower risk of revision for aseptic loosening. Further study to identify specific risk factors for aseptic loosening and confirm the findings presented here are warranted.

LEVEL OF EVIDENCE

Level III.

[Total knee arthroplasty in the young patient-an update]

The absolute number of total knee arthroplasties (TKA) continues to rise every year. About 10% of the patients are less than 55 years of age, although it is known that functional results and patient satisfaction are lower combined with an increased likelihood of revision compared to older patients. Higher physical activity and patient expectations are a major challenge in this age group. At the same time, the incidence of posttraumatic/postoperative alterations is high, including ligamentous or bony deficiencies, which can make the surgical procedure challenging. In view of these facts conservative treatments and joint sparing procedures should always be considered first. The potential correction of lower-limb deformities and unicompartmental knee arthroplasties need to be carefully evaluated before considering total knee arthroplasty. Only in advanced cases of osteoarthritis in more than one compartment of the knee of with combined ligamentous instability, can a TKA provide satisfactory results in the young patient. However, the strongest predictor of satisfaction is a realistic expectation.

Hot spots and trends in knee revision research since the 21st century: a bibliometric analysis

Background

With the popularization of knee replacement surgery in the treatment of the advanced lesions of knee joint, the amount of knee revision surgery is increasing unceasingly. Meanwhile, the continuous introduction of new clinical concepts and new technology poses a challenge to researchers and surgeons. Our study aims to inform the future scientific research and clinical treatment, by investigating the hot spots and trends of the knee revision research field with the method of bibliometric analysis.

Methods

Publications on knee revision included in the database of Web of Science Core Collection (WoSCC) between 2000 and 2018 were reviewed and MeSH terms of them were extracted from PubMed. Online bibliometric analysis website (http://bibliometric.com/), two pieces of software called “CiteSpace” and “Bibliographic Item Co-Occurrence Matrix Builder” (BICOMB) were used to analyze the publications reviewed at quantitative level. Another piece of software called “gCLUTO”, was used to investigate the hot spots with visualization techniques at qualitative level.

Results

A total of 906 publications were retrieved between 2000 and 2018. There is an increasing number of publications, from 15 in 2000 to 86 in 2018. Journal of Arthroplasty is the leading journal which has the most publications on knee revision. The United States has been the biggest contributor. Mayo Clinic became the leader among the institutions which have conducted correlational researches. David G. Lewallen, Robert L. Barrack and Michael A. Mont should be regarded as the scholars who have made outstanding contribution. Hot spots were summed up in six clusters, respectively, the solutions for infection, prostheses, the adverse effects, the surgical techniques, epidemiological characters, and the pathophysiology of the revision knee.

Conclusions

We found a growing trend in knee revision research and extracted the most contributive researchers, institutions, countries, journals, and most-cited articles worldwide. The solutions for complications, surgical applications and analysis for epidemiological characters have been the hot spots. Multi-disciplinary integration is becoming the time-trend of hot spots. Minimally invasive and navigation are directions of revision surgery. They together constitute a solid foundation and set up a fingerpost for the future scientific research and clinical treatment.

High Medium-Term Survivorship of Cruciate-Retaining Total Knee Arthroplasties (110 Knees) for Valgus Deformity

The main purpose of this article is to evaluate the clinical outcomes and survivorship of cruciate-retaining (CR) knee arthroplasties for valgus deformity. This article is retrospective consecutive series of 110 valgus knees using CR implants with a minimum 2-year follow-up. Deformity correction was achieved using stepwise sequential soft tissue releases (iliotibial band, popliteus tendon, lateral collateral release through sliver femoral condylar osteotomy). Demographic data, range of movement, and degrees of deformity were collected. The Oxford Knee Score (OKS) was used as patients' reported outcome measure at final follow-up. One-hundred and four patients (110 knees) were included (87 females/17 males) with mean age of 68.7 years. Primary diagnosis was osteoarthritis in 85 patients and rheumatoid arthritis in 19 patients. Mean follow-up was 5.5 years (median: 5 years; range: 2-14 years). Preoperative valgus deformity was measured radiographically using the mechanical tibiofemoral angle with a mean 18.6° (standard deviation [SD]: 7.5; range: 11-38°). At final follow-up, mechanical tibiofemoral angle was 3.8° (SD: 1.97; range: 2-8°). A p-value was <0.0001 and mean OKS was 42 (SD: 5.4; range: 36-48) suggesting satisfactory patients' reported outcomes with no implant revision for any cause. CR implants for valgus knees using staged soft tissue releases including sliver condylar osteotomy had excellent medium-term survivorship and satisfactory patient reported outcome measures. The Level of Evidence for this study is IV.

Patients with Dupuytren's Contracture, Ledderhose Disease, and Peyronie's Disease are at higher risk of arthrofibrosis following total knee arthroplasty

BACKGROUND

Total knee arthroplasty (TKA) is a successful treatment for patients with late stage osteoarthritis, yet arthrofibrosis remains a consistent cause of TKA failure. Dupuytren's, Ledderhose and Peyronie's Diseases are related conditions of increased fibroblast proliferation. The aim of this study was to identify whether an association exists between these conditions and arthrofibrosis following TKA.

METHODS

Patient records were queried from 2010 to 2016 using an administrative claims database to compare the rates of arthrofibrosis, manipulation under anesthesia (MUA), lysis of adhesions (LOA), and revision TKA in patients with independent chart diagnoses of Dupuytren's Contracture, Ledderhose, or Peyronie's Diseases versus those without. Complications were queried and compared using multivariate logistic regression.

RESULTS

Patients with Dupuytren's (n = 5,232) and Ledderhose (n = 50,716) had a significantly higher rate of ankylosis following TKA: 30-days (OR, 1.54; OR, 1.23), 90-days (OR, 1.20; OR, 1.24), 6-months (OR, 1.23; OR, 1.23), and 1-year (OR, 1.28; OR, 1.23), while patients with Peyronie's (n = 1,186) had a higher rate of diagnosis at 6-months (OR, 1.37) and 1-year (OR, 1.35). Patients with diagnoses of any of the fibroproliferative diseases had a statistically higher risk of MUA at 90-days, 6-month, and 1-year following primary TKA. These cohorts did not have a significantly higher rate of revision TKA.

CONCLUSION

There is an increased odds risk of arthrofibrosis and MUA in patients who have undergone TKA and have a diagnosis of Dupuytren's Contracture, Ledderhose, or Peyronie's Diseases. Improvements to frequency and application of post-operative treatment should be considered in these cohorts to improve outcomes.

Evaluating Posterior Cruciate Ligament Integrity in Inflammatory Arthritis Patients Prescribed Biologic Agents: A Radiological Case-Control Study

Introduction

Patients with inflammatory arthropathies present a significant challenge to the arthroplasty surgeon when they present with symptomatic degenerative changes of their knee joint. Debate is ongoing regarding the selection of implants for this cohort of patients. There is conflicting evidence for the use of posterior-stabilising (PS) over cruciate-retaining (CR) designs in this cohort. Biologics are licensed for use in moderate-to-severe disease that has not responded to conventional treatment. To our knowledge, there are no studies that have assessed the integrity of the posterior cruciate ligament (PCL) on magnetic resonance imaging (MRI) in these patients with more advanced disease prescribed biologic agents.

Aim

The aim of this study is to assess the integrity of the PCL on MRI in patients with inflammatory arthritis who are prescribed biologic agents.

Methods

A case-control study was performed, with cases identified through chart review to confirm prescription of biologic agents for inflammatory arthropathies, who also had contemporaneous MRI knee scans performed. Knee MRIs for age- and sex-matched controls with osteoarthritis (OA) and meniscal pathology were identified from the National Joint Registry and the Hospital In-Patient Enquiry (HIPE), respectively.

The MRIs were reviewed by two musculoskeletal radiologists who were blinded to the clinical details. They were asked to assess the MRIs to determine PCL integrity, synovial Inflammation, and any associated pathology.

Results

No difference was noted in the rate of synovitis, PCL attenuation, or PCL tears between the OA and inflammatory arthropathy groups (p > 0.05).

Conclusions

The results of this study show no difference in the integrity and continuity of the PCL in those patients for age- and sex-matched controls on MRI. This finding lends support to the use of CR total knee arthroplasty in patients with inflammatory arthropathy on biologic agents.

Effect of Ligament Properties on Nonlinear Dynamics and Wear Prediction of Knee Prostheses

Although wear is known as the primary cause of long-time failure of total knee arthroplasty (TKA), it can be vital in short- and midterm TKA failure due to laxity. One of the reasons leading to joint laxity and instability is ligamentous insufficiency. This study, therefore, aims to investigate the effects of insufficient ligaments-related knee laxity on both nonlinear dynamics and wear of TKA. The study hypothesizes (a) ligamentous insufficiency can increase TKA damage; (b) stiffness reduction of each of the posterior cruciate ligament (PCL) and medial-lateral collateral ligaments (MCL-LCL) can differently contribute to TKA damage. A forward dynamics methodology is developed and the ligament behavior is simulated employing an asymmetric nonlinear elastic model. External loads and moment, due to the presence of all soft tissues, e.g., muscles and hip joint reaction forces, applied to the femoral bone are determined using a musculoskeletal approach linked to the developed model. A mesh density analysis is performed and comparing outcomes with that available in the literature allows for the assessment of our approach. From the results acquired, reduced PCL stiffness leads to an increase in linear wear rates and results in the maximum damage in TKAs. However, the maximum linear wear rates on both condyles occur once the stiffness of all ligaments is reduced. Moreover, the worn area of the tibia surface increases with the reduction in MCL-LCL stiffness on the medial condyle. The joint with insufficient PCL also shows a considerable increase in ligament forces right after toe-off.

Bi-cruciate retaining total knee arthroplasty: a systematic literature review of clinical outcomes

Total knee arthroplasty (TKA) has been shown to have good long-term outcomes and survivorship. Nonetheless, dissatisfied patients are frequently reported in the literature. Bi-cruciate retaining total knee prostheses (BCR TKA) were designed to address the demand for more kinematically functional implants that better reconstruct natural knee kinematics. In BCR TKA, the anterior cruciate ligament (ACL) is preserved. Improved patient-reported outcomes and satisfaction levels are expected. This review aimed to summarize indications for and clinical outcomes of BCR TKA. A systematic literature review on BCR TKA was performed. 24 articles were included for data analysis. Indications covered osteoarthritis, inflammatory arthritis and others. The degree of deformity was often but not always limited to minor axial deformity and contractures: maximum acceptable varus/valgus deformity reached 10°-30° and flexion contractures of 15°-65°. ACL intactness was macroscopically examined intraoperatively in nine studies and clinically tested in ten studies (e.g., Lachmann Test, drawer-test). Objective and patient-reported outcome scores were reported for follow-up periods of up to 22 years. Survival rates varied significantly. For first generation implants, 22-year survival reached 82% while a second generation design was associated with 13.5% revision rate at 18 months. Reasons for varying outcomes were not clear and may be attributed to the implant itself, surgical techniques and patient specific variables including changed expectations and functional demand. The literature has not shown clear indications and guidelines for the use of BCR implants. The promising results of first generation BCR TKA designs may be optimized through improved implant designs in the future. Further studies are advocated to provide the necessary evidence of second generation BCR TKA designs.

J-curve design total knee arthroplasty: the posterior stabilized shows wider medial pivot compared to the cruciate retaining during chair raising

PURPOSE

Which total knee arthroplasty (TKA) design represents the better solution to restore a correct knee biomechanics is still debated. The aim of this study was to compare posterior stabilized (PS) and cruciate retaining (CR) version of the same TKA design (femoral component with an anatomic sagittal radius-J-curve design) by the use of dynamic Roentgen stereophotogrammetric analysis (RSA). The hypothesis was that the two models influence differently in vivo knee kinematic.

METHODS

A cohort of 16 randomly selected patients was evaluated 9 months after surgery: Zimmer PERSONA® was implanted, eight with CR design and eight with PS design. The kinematic evaluations were performed using a Dynamic RSA (BI-STAND DRX 2) developed in our Institute, during the execution of the sit-to-stand motor task. The motion parameters were obtained using the Grood and Suntay decomposition and the low-point kinematics methods.

RESULTS

PS TKA lateral femoral compartment had a wider anterior translation (17 ± 2 mm) than the medial one (11 ± 2 mm), while the two compartments of CR TKA showed a similar anterior translation (medial: 9 ± 2 mm/lateral: 11 ± 2 mm). T test for comparison between CR and PS TKA of antero-posterior translation showed a statistically significant difference (p < 0.05) in the flexion range between 15° and 40°. The CR prosthesis did not anteriorly translate during flexion. The PS design translated anteriorly showing a roll-forward mechanism during extension from 80° to 18° of flexion and a posterior translation from 18° to 0°. The same significant differences (p < 0.05) between the PS and CR groups were found comparing the low-point positions of the femoral condyles in the range of flexion between 25° and 40° for the medial compartment and between 15° and 25° for the lateral compartment.

CONCLUSIONS

Dynamic RSA was able to investigate for the first time in vivo the kinematic behaviour of PS and CR version of the same TKA J-curve design. PS type showed a medial pivot during sit-to-stand motion task, while the CR type showed a cylindrical movement. Further studies are needed to evaluate the impact of different TKA designs on clinical results.

LEVEL OF EVIDENCE

IV.

Controversial Topics in Total Knee Arthroplasty: A 5-Year Update (Part 1)

This review article examines updates to the literature during the past 5 years on numerous topics related to total knee arthroplasty which were felt to have ongoing controversy. These include the use of peripheral nerve blocks and local infiltrative analgesia, intrathecal morphine, patellar resurfacing, and bearing designs.

Factors affecting aseptic loosening in primary total knee replacements: an in vitro study

Background

Implant surface integrity and cement bonding are assumed to be sufficient in primary total knee replacements to stabilize implants for extended wear without concerns over delamination and loosening. Yet there exists a significant rate of aseptic loosening where failure at implant cement interface occurs. The aim of this study is to look at specific aspects leading to aseptic loosening of the total knee replacement, where cement adhesion to the implant results in the lowest pull off strength.

Methods

Virgin ceramic coated and uncoated chrome cobalt tibial trays were used in a pull off study using differing viscosities of cement at varied time intervals to compare which combination is strongest compared to which is least resistant to pull off testing.

Results

Low viscosity cement had a 44% (5.9 kg verses 3.3 kg, p < 0.001) higher pull-off strength compared to high viscosity cement. Coated implants had a 30% (3.9 kg verses 5.5 kg, p = 0.037) lower pull-off strength compared to non-coated. Testing measures were limited to cement utilization less than 5 minutes due to the poor adhesion of the dowels beyond this time. Finally, there was a significant difference in adhesion properties between brand names when utilizing low viscosity cement on the non-coated trays (10.34 kg for Simplex verses 4.87 for Palacos, p = 0.021).

Conclusion

There are differences in adhesion properties between cement vendors, prompting significant concerns over the use of coated implants with particular cement types. Use of low viscosity cement on non-coated surfaces in the early liquid phase of cement curing was found to produce the best chance for adequate adhesion. This study demonstrates that there is variation in the adhesive properties of implants utilized in total knee replacements, and that the orthopedic community should consider not only the implant, cement, and curing time individually, but the overall integrity conferred from the combination of all of these variables.

Aseptic Loosening at the Tibia in Total Knee Arthroplasty: A Function of Cement Mantle Quality?

BACKGROUND

Aseptic loosening remains one of the leading causes for failure of total knee arthroplasty (TKA). We sought to identify early radiographic measures that may associate with aseptic tibial component loosening, emphasizing systematic evaluation of the cement mantle.

METHODS

All TKA revisions from 2007 to 2015 with the primary indication of tibial aseptic loosening were identified using in an institutional implant retrieval database. After exclusion criteria, 61 TKAs comprised the study group. A matched control group of 59 TKAs that had not failed at a minimum of 3 years was identified for comparison. Radiographic analysis on all 6-week postoperative radiographs included angulation of components, cement penetration depth, and presence of radiolucency at the implant-cement and bone-cement interfaces. Groups were compared with Student's t-test, chi-squared test, and Mann-Whitney U-test. A final multivariable logistic regression model was formed for the outcome of aseptic loosening.

RESULTS

On multivariable analysis, failure was associated with a greater number of zones with cement penetration <2 mm (5.6 vs 3.4 zones, odds ratio [OR] 1.89, P < .001), increasing percent involvement of radiolucency at the implant-cement interface (8.7% vs 3.1%, OR = 1.15, P = .001), and increased varus alignment of the tibial component (1.5° vs 0°, OR = 1.35, P = .014). A greater number of zones with a radiolucent line at the bone-cement interface did not significantly associate (1.1 vs 0.3, P = .091).

CONCLUSION

Our results suggest that radiographic indicators of poor cement mantle quality associate with later aseptic loosening. This emphasizes the need for surgeons to perform careful cement technique in order to reduce the risk of TKA failure.

LEVEL OF EVIDENCE

III (Case-control).

The Association of Race/Ethnicity and Total Knee Arthroplasty Outcomes in a Universally Insured Population

BACKGROUND

Prior studies have documented racial/ethnic disparities in the United States for total knee arthroplasty (TKA) outcomes. One factor cited as a potential mediator is unequal access to care. We sought to assess whether racial/ethnic disparities persist in a universally insured TKA population.

METHODS

A US integrated health system's total joint replacement registry was used to identify elective primary TKA (2000-2016). Racial/ethnic differences in revision and 90-day postoperative events (readmission, emergency department [ED] visit, infection, venous thromboembolism, and mortality) were analyzed using Cox proportional hazard and logistic regression with adjustment for confounders.

RESULTS

Of 129,402 TKA, 68.8% were white, 16.2% were Hispanic, 8.4% were black, and 6.6% were Asian. Compared to white patients, Hispanic patients had lower risks of septic revision (hazard ratio [HR] = 0.69, 95% confidence interval [CI] = 0.57-0.83) and infection (odds ratio [OR] = 0.42, 95% CI = 0.30-0.59), but a higher likelihood of ED visit (OR = 1.28, 95% CI = 1.22-1.34). Black patients had higher risks of aseptic revision (HR = 1.61, 95% CI = 1.42-1.83), readmission (OR = 1.13, 95% CI = 1.02-1.24), and ED visit (OR = 1.31, 95% CI = 1.23-1.39). Asian patients had lower risks of aseptic revision (HR = 0.67, 95% CI = 0.54-0.83), septic revision (HR = 0.78, 95% CI = 0.60-0.99), readmission (OR = 0.89, 95% CI = 0.79-1.00), and venous thromboembolism (OR = 0.59, 95% CI = 0.45-0.78).

CONCLUSION

We observed differences in TKA outcome, even within a universally insured population. While lower risks in some outcomes were observed for Asian and Hispanic patients, the higher risks of aseptic revision and readmission for black patients and ED visit for black and Hispanic patients warrant further research to determine reasons for these findings to mitigate disparities.

LEVEL OF EVIDENCE

Level III.

Differences in outcome after cruciate retaining and posterior stabilized total knee arthroplasty

BACKGROUND

Both cruciate retaining (CR) and posterior stabilized (PS) implants are commonly used for primary total knee arthroplasty. There is evidence to support improved range of motion in PS knee replacements, but there is no evidence showing functional superiority. The aim of this study was to compare functional outcomes between CR and PS knee replacements.

PATIENT AND METHODS

Prospectively collected regional joint registry data were used to compare preoperative and postoperative one, 5- and 10-year Oxford and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scores in 1287 primary total knee replacements. Differences in functional scores between CR and PS knees were calculated.

RESULTS

The PS group had better functional scores than the CR group at baseline (mean Oxford score 15.59 vs. 14.52 ( p = 0.026) and mean WOMAC score 59.51 vs. 62.35 ( p = 0.012)), at 1 year postoperatively (mean Oxford score 37.94 vs. 36.63 ( p = 0.015) and mean WOMAC score 16.20 vs. 19.73 ( p = 0.001)) with a similar trend at 5 years postoperatively (mean Oxford score 39.66 vs. 38.50 ( p = 0.054) and mean WOMAC score 16.89 vs. 18.83 ( p = 0.131)). There was no difference in the overall functional improvement between the PS and CR groups at 1, 5, or 10 years. WOMAC subcomponent scores showed greater improvement in stiffness; 3.76 versus 3.36 ( p = 0.012) in PS knees at 1 year postoperatively. No significant differences were observed at 5 or 10 years.

CONCLUSIONS

PS knee replacements showed greater improvement in stiffness at 1 year postoperatively. There was no difference observed at 5 or 10 years postoperatively. PS knees had better functional outcomes at 1 year with a similar trend at 5 years postoperatively.

LEVEL OF EVIDENCE

III.

Clinical outcome, functional outcome and patient satisfaction after cruciate retaining total knee arthroplasty for stiff arthritic knee - A short term outcome study

Background

Various authors have shown that Cruciate Retaining (CR) Total Knee Arthroplasty (TKA) has better long-term survivorship compared to Posterior Stabilized (PS), however most arthroplasty surgeons tend to use PS knees in patients with severe deformity and stiffness. There is limited data correlating stiffness and CR versus PS design. The aim of our study was to assess the outcome of CR TKA for patients with stiff arthritic knee.

Materials & methods

We evaluated the results of 30 knees with osteoarthritis and inflammatory arthritis and preoperative stiffness (ROM 15-90°), who had been treated with CR TKA with a mean follow up of 2 years. The primary outcome variable measures were improvement in the flexion, flexion deformity (FFD) and overall improvement in the arc of motion. Patients were also evaluated by Knee Society Score (KSS), WOMAC score and 5-point Likert scale for patient satisfaction.

Result

At the time of final follow-up, the mean arc of motion improved from 75° preoperatively to 108° postoperatively and it was statistically significant (p < 0.001). Similar improvement was noted for FFD (15.43° to 0.83° (p < 0.001)), maximum flexion from 90.9° to 109.1° (p < 0.001), KSS clinical from 37.67 to 87.47 (p < 0.001), KSS functional from 58.5 to 93.83 (p < 0.001), WOMAC from 76.73 to 7.63 (p < 0.001). Further, the Likert Scale for patient satisfaction was excellent for 90% of the patients.

Conclusion

This study clearly shows that the routine use of PS design for complex stiff knees has questionable scientific intent and standard CR TKA design in stiff knees can produce excellent outcome. Since there is slight preponderance of data pointing towards improved longevity with CR design, it would be a better option for the patients with longer life expectancy.

Intact, pie-crusting and repairing the posterior cruciate ligament in posterior cruciate ligament-retaining total knee arthroplasty: A 5-year follow-up

BACKGROUND

The posterior cruciate ligament (PCL) is important for cruciate-retaining (CR) total knee arthroplasty (TKA). Whether the entire PCL should be retained during CR-TKA is controversial.

AIM

To evaluate the clinical outcomes of PCL preservation in CR-TKA and the methods used to deal with the PCL during surgery.

METHODS

A retrospective review of patients with osteoarthritis undergoing primary CR-TKA (176 patients, 205 knees) in our institution between March 2012 and March 2014 was performed. A PCL protector was used to preserve the intact PCL bone block. The status of the PCL was recorded during surgery. Intact PCL preserved, pie-crusting and repairing were used to balance the tension of the PCL. Range of motion (ROM) and the Knee Society Clinical Rating system (KSS) were evaluated preoperatively and at the endpoint of follow-up.

RESULTS

The mean ROM of the knee was 103.2 ± 17.2°, KSS clinical score was 47.6 ± 9.5 and KSS functional score was 46.3 ± 11.9 before surgery. The mean ROM of the knee was 117.5 ± 9.7°, KSS clinical score was 89.2 ± 3.6 and KSS functional score was 84.6 ± 9.8 at 5 years follow-up. ROM, KSS clinical scores and KSS functional scores were significantly improved after surgery (P < 0.01). Thirty-two (23.7%) TKAs involved PCL pie-crusting and 18 (13.3%) involved PCL repair. Eighty-five (63.0%) TKAs applied standard operating procedures and preserved intact PCL. At 5 years follow-up, in the intact PCL group, the mean ROM of the knee was 118.0 ± 8.3°, KSS clinical score was 89.1 ± 3.7 and KSS functional score was 84.9 ± 9.6. In the PCL pie-crusting group, mean ROM of the knee was 114.0 ± 13.5°, KSS clinical score was 88.8 ± 3.4 and KSS functional score was 83.8 ± 10.5. In the PCL repair group, mean ROM of the knee was 120.3 ± 7.0°, KSS clinical score was 89.0 ± 3.6 and KSS functional score was 89.4 ± 4.5. There were no significant differences in ROM, KSS clinical scores and KSS functional scores among the three groups (P > 0.05).

CONCLUSION

The clinical outcomes of preserving the PCL in CR-TKA are encouraging. Pie-crusting and PCL repair do not affect the function. The PCL protector effectively protected the PCL bone block.

Early experience with the ATTUNE Total Knee Replacement System

BACKGROUND

Modern TKA implants promise to improve functional outcomes, stability, patient satisfaction and operating room efficiency. The purpose of this retrospective study is to evaluate our short-term clinical and radiological results and survival using the ATTUNE Total Knee Replacement System.

METHODS

The authors reviewed 228 primary cemented TKAs using ATTUNE Total Knee Replacement System which were implanted between 2014 and 2018 concerning short-term clinical and radiographical outcomes and survival. Clinical evaluation was performed using the Knee injury Osteoarthritis Outcome Score (KOOS), the Oxford Score and a Numeric Rating Scale (NRS) for pain. Radiographic analysis was performed using the Modern Knee Society Score Evaluation System.

RESULTS

The means of the clinical results as measured with KOOS score were Pain 82,7, Symptoms 79, ADL 78,3, Sport and recreation 51,8 and QOL 78,6. The mean Oxford score was 35 and NRS 2. The mean ROM was 113,4 (SD 9,4 range 90-130). Radiographically mean mechanical axis was 1,97° of Varus and radiolucent lines were detected in 43 knees (22,4%). The survival rate is 98.4% at 2 years and 97.4% at 5 years.

CONCLUSION

At short-term follow-up the ATTUNE Knee Replacement System provide excellent clinical and radiographical outcomes and good results regarding revision rate. Due to high incidence of radiolucent lines, those patients should be closely monitored even though they show no clinical evidence for loosening.

Short term patient outcomes after total knee arthroplasty: Does the implant matter?

BACKGROUND

Newer implants for total knee arthroplasty (TKA) often gain market share at higher cost with little patient-reported and long-term clinical data. We compared outcomes after TKA using two different implants: DePuy PFC Sigma and Attune.

METHODS

Using a prospective data repository from an academic tertiary medical center, we analyzed 2116 TKAs (1603 Sigma and 513 Attune) from April 2011 through July 2016. Outcomes included length of surgery, length of stay, facility discharge, 90-day reoperation, range of motion (ROM) change, and patient-reported physical function (PCS).

RESULTS

There was no difference in length of surgery (Attune -2.87 min, P = 0.143). Implant type was not associated with extended LOS (>3 days) (OR 0.80, P = 0.439). There was no difference in facility discharge (OR 0.65, P = 0.103). Unadjusted 90-day reoperations were 0.3% for Sigma and 1.0% for Attune cohorts (P = 0.158). Sigma implants were associated with more ROM improvement in unadjusted analyses (+2.1 degree improvement P = 0.031). Fifty nine percent of the Sigma cohort and 49% of the Attune cohort achieved the minimal clinically important (MCID) change for PCS improvement, although there was no adjusted difference in achieving MCID (Attune OR 0.84, P = 0.435). There was no adjusted difference in absolute PCS improvement (Attune +0.12 score, P = 0.864).

CONCLUSIONS

Our data show no difference in physical function and most outcomes between Sigma and Attune. Attune implants had shorter absolute LOS, but there were no differences in extended LOS.

What to Know for Selecting Cruciate-Retaining or Posterior-Stabilized Total Knee Arthroplasty

There has been continuing debate about the superiority of cruciate-retaining (CR) total knee arthroplasty (TKA) versus posterior-stabilized (PS) TKA for obtaining knee joint stability with functional improvement. Many surgeons tend to select the type of prosthesis on the basis of their own training and experience. However, the selection must be based on a great store of knowledge rather than on the surgeon's preconceptions or preferences. CR TKA may not be feasible in certain settings: posterior cruciate ligament insufficiency, severe deformity, and history of trauma or surgery. The risk of conversion from a CR type prosthesis to a PS type prosthesis might be high in patients with severe flexion contracture, steep posterior slope, and small femoral component size. The above factors should be carefully considered for an appropriate selection of the type of prosthesis. The surgeon should have a clear understanding on the technical differences between CR and PS TKAs. The amount of distal femoral resection, femoral component size, and tibial slope are particularly crucial for successful TKA. Unless they are meticulously determined, stiffness or instability will ensue, which can be difficult to resolve afterwards. There was no notable difference in functional outcome, range of motion, kinematics, and survival rate between CR and PS TKAs in most previous studies. Strict adherence to surgical indications and solid understanding of differences in surgical principles might be more important than the selection of either a CR or PS prosthesis.

Unacceptable failure rate of a ceramic-coated posterior cruciate-substituting total knee arthroplasty

Background

Aseptic loosening is one of the most elusive problems in total knee arthroplasty. We compared the failure rates of posterior cruciate-substituting total knee arthroplasty utilizing implants with hardened surface coating to a previous cohort of patients who underwent the procedure with traditional cruciate-retaining noncoated cobalt-chrome implants.

Methods

A retrospective study was conducted of 1099 total knee arthroplasties performed from 2009 to 2017. Two hundred forty-nine total knee arthroplasties performed from January 2015 to March 2017 under a single design were reviewed retrospectively and compared to the author’s previous 850 total knee arthroplasties performed from January 2009 to December 2014 under a different design.

Results

This series demonstrated an alarming debonding of cement in the tibial implant. The resultant failure rate of 6% (P < .001) is higher than observed in 850 total knee arthroplasties in the previous 5 years and higher than those reported in the literature giving cause for concern regarding this implant.

Conclusions

Due to the observed excessive failure rate, the authors recommend exercising high levels of caution using this implant with hardened surface treatment until further testing can be ascertained as to the root cause of failure.

Posterior-stabilized versus cruciate-retained implants for total knee arthroplasty: a meta-analysis of clinical trials

AIM

A meta-analysis comparing the outcomes of patients undergoing cruciate retaining (CR) versus posterior stabilized (PS) in primary total knee arthroplasty was performed. The outcomes of interest were the Knee Society Rating System, clinical (KSCS) and functional (KSFS) subscales, joint range of motion (ROM), surgical duration and further complications (anterior knee pain, instability and revision rate).

MATERIALS AND METHODS

The search was conducted in July 2018, accessing the following databases: Cochrane Systematic Reviews, Scopus, PubMed, EMBASE, CINAHL, AMED and Google Scholar. We included only clinical trials level of evidence I and II. During the statistical analysis, we excluded all the studies that affect negatively the I² test, in order to achieve more reliable results. For the methodological quality assessment we referred to the PEDro score. The risk of publication's bias was evaluated by the funnel plots across all the comparisons.

RESULTS

The PEDro score reported a good methodological quality assessment. The funnel plot detected a very low risk of publication's bias. We included in this study 36 articles, counting a total of 4052 patients and 4884 procedures. The mean follow-up term for both groups was 3.39 years. The ROM resulted in an overall estimate effect of 2.18° in favor of the PS group. The overall WOMAC showed a result in favor of the PS group. The overall estimate effect of the KSCS was 0.02% higher in the CR group. The KSFS showed an overall estimate effect of 2.09% in favor of the PS group. Concerning the surgical duration, the estimate effect resulted in 6.87 min shorter in the CR group. No differences were reported across the two groups regarding anterior knee pain, knee joint instability or revision rate.

CONCLUSION

Both the prosthetic implants provided to be a safety and feasible solution to treat end-stage knee joint degeneration. The PS implants reported improvements in the knee range of motion and a prolongation of the surgical time. No clinically relevant dissimilarities concerning the analyzed scores were evidenced. No statistically significant relevant differences in complications were detected.

Higher mid-term revision rates of posterior stabilized compared with cruciate retaining total knee arthroplasties: 133,841 cemented arthroplasties for osteoarthritis in the Netherlands in 2007-2016

Background and purpose - The preference for a cruciate retaining (CR) or posterior stabilized (PS) TKA (total knee arthroplasty) system varies greatly between Dutch hospitals, independent of patient characteristics. We examined mid-term revision rates for men and women of different age categories. Patients and methods - We included all 133,841 cemented fixed-bearing primary CR or PS TKAs for osteoarthritis reported in the Dutch Arthroplasty Register (LROI) in 2007-2016. Revision procedures were defined as minor when only insert and/or patella were revised and as major when fixed components (tibia and femur) were revised or removed. 8-year all-cause revision rates of CR and PS TKAs were calculated using competing-risk analyses. Cox-regression analyses were performed, adjusted for age at surgery, sex, ASA -score, and previous operations. Results - PS TKAs were 1.5 (95% CI 1.4-1.6) times more likely to be revised within 8 years of the primary procedure, compared with CR TKAs. When stratified for sex and age category, 8-year revision rate of PS TKAs in men <60 years was 13% (CI 11-15), compared to 7.2% (CI 6.1-8.5) of CR TKAs. Less prominent differences were found in older men and women. For men <60 years differences were found for minor (CR 1.8% (CI 1.4-2.5); PS 3.7% (CI 3.0-4.7)) and major revisions (CR 4.2% (CI 3.3-5.3); PS 7.0% (CI 5.6-8.7)). Interpretation - Patients who received a cemented fixed-bearing primary PS TKA for osteoarthritis are more likely to undergo either a minor or a major revision within 8 years. This is especially prominent for younger men.

"Thicker" Polyethylene Bearings Are Not Associated With Higher Failure Rates in Primary Total Knee Arthroplasty

BACKGROUND

Despite improvements in polyethylene bearing surface properties, only 1 previous study has examined the results of larger thickness bearings. The purpose of this study was to determine whether polyethylene thickness influenced patient outcomes and implant survival following modular total knee arthroplasty.

METHODS

A retrospective review was performed of patients undergoing primary total knee arthroplasty from 2003 to 2014 in a single practice database. Patients were separated into "thin" and "thick" polyethylene groups based on manufacturer polyethylene bearing sizes of 14 mm or less compared to those greater than 14 mm, respectively. Patient clinical outcomes, need for revision surgery, and overall implant survival rates were evaluated.

RESULTS

A total of 6698 primary knee arthroplasties were included, and a thin bearing was used in 96.5% of these cases. Preoperatively, patients with a thick bearing had significantly lower Knee Society clinical scores (P < .01), a trend toward lower functional scores (P = .06), and more significant coronal plane deformity. Postoperatively, patients with thick bearings exhibited better Knee Society clinical and pain scores as well as similar functional scores and University of California at Los Angeles activity scores. The overall reoperation rate and 10-year survivorship free of revision were similar between thick and thin bearings (1.7% vs 2.3%; 98.2% vs 96.1%). Patients with thin bearings were twice as likely to require a manipulation under anesthesia postoperatively (P = .02), while there were no failures in the thick bearing group due to aseptic loosening or instability.

CONCLUSION

Patients with thick polyethylene bearings performed similarly or better in multiple clinical outcomes and survivorship compared to those with thin bearings.

Arthroplasty implant registries over the past five decades: Development, current, and future impact

Local, regional, and national registries have played an important role in the development of hip and knee arthroplasty and the treatment of patients with various maladies of these joints. Four arthroplasty registries stand out as leading forces behind the drive to popularize the use of registries and pursue the concept of evidence based medicine. The Mayo registry, started by Mark Coventry, is recognized as the oldest continuing registry for arthroplasty. The Harris Registry at Massachusetts General Hospital, along with the Mayo Registry, has greatly contributed to the advancement of arthroplasty surgery and have served an important role of identifying poorly performing implants and techniques in the United States. The Swedish Knee Arthroplasty Registry is the oldest national registry dedicated to joint arthroplasty and along with the Swedish Hip Arthroplasty Registry have established the infrastructure, analysis and reporting mechanisms, and leadership that has enabled other countries to subsequently develop national registries around the world. As more countries have adopted the concept of national registries, a new area of research is possible by pooling the resources of large registries as is now occurring with the Nordic countries. Several international organizations have been formed to promote future collaboration and develop international standards. The process of globalization of registries is a result of continued efforts over the past 50 years in improving and disseminating the knowledge gained from the early registries. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2319-2330, 2018.