Pharmacokinetics of nano- and microcrystal formulations of low solubility compounds after intramuscular injection to mice

OBJECTIVES

The aim of this study was to investigate the pharmacokinetics (PK) of poorly soluble compounds when administered intramuscularly (i.m.) as crystalline particles of different sizes.

METHODS

Three uncharged compounds (griseofulvin, AZ'72, and AZ'07) with varying aqueous solubility were dosed to mice at 10 and 50 mg/kg as nano- and microparticle formulations. The PK of the compounds was evaluated.

KEY FINDINGS

The smaller particles of the drugs resulted in higher maximum plasma concentration (Cmax) and area under the plasma concentration-time profile (AUC) at 50 mg/kg. There was a dose-proportional increase in AUC but less than dose dose-proportional increase in Cmax. The evaluation at 10 mg/kg was more complex as increased exposure for nanoparticles was only observed for griseofulvin which has the highest solubility. In addition, there was an increase in half-life with an increase in dose.

CONCLUSIONS

This study highlights that general expectations based on in vitro dissolution (i.e. that smaller particles dissolve faster than larger particles when surrounded by liquid) do not always translate to in vivo and demonstrates the importance of understanding the physicochemical properties of the drug, the characteristics of the formulations and the microphysiology at the delivery site.

Self-association of cyclodextrin inclusion complexes in a deep eutectic solvent enhances guest solubility

Cyclodextrins are widely used pharmaceutical excipients known to increase the solubility of drug compounds through formation of inclusion complexes. A prominent limitation of common cyclodextrins is their own scarce solubility in water, which renders them unsuitable for many drug formulations. Cyclodextrin solubility can be enhanced in appropriate media such as Deep Eutectic Solvents (DESs). However, DESs can also reduce the equilibrium constant for host-guest complexation, making it challenging to optimize drug solubility using cyclodextrin. To determine the impact and mechanism of cyclodextrin complexation in DES, we tracked changes in the solubility of methyl orange (MO), serving as a hardly soluble model compound, in the presence of β-cyclodextrin (CD) in hydrated urea-choline chloride DES. The highest achievable MO solubility is obtained in concentrated CD-in-DES mixtures at low hydration, resulting from the higher solubility of CD⊃MO complexes in DES compared to water as a solvent. Combining our results with molecular dynamics simulations, we provide evidence that CD⊃MO complexes self-associate into dimers and larger oligomers. This self-association of complexes greatly enhances MO solubilization by CD beyond that expected from the canonical 1:1 binding stoichiometry. This newly unraveled solubilization mechanism via cyclodextrins and its facilitation by DES should aid the design of future drug formulations.

Cyclodextrins: Enhancing Drug Delivery, Solubility and Bioavailability for Modern Therapeutics

Cyclodextrins (CDs) have revolutionized the pharmaceutical industry with their ability to enhance the stability, solubility, and bioavailability of a wide range of active substances. These cyclic oligosaccharides, with a unique hydrophilic exterior and hydrophobic cavity, form inclusion complexes with poorly soluble drugs, improving their pharmacokinetic profiles and therapeutic efficacy. This review explores the multifaceted roles of cyclodextrins in pharmaceutical formulations, ranging from oral, ophthalmic, parenteral, and topical applications to their emerging use in targeted therapies, gene delivery, and treatment of neurodegenerative, cardiovascular, and infectious diseases. Cyclodextrins not only improve drug solubility and controlled release but also reduce toxicity and side effects, leading to safer and more effective treatments. Recent advancements, such as cyclodextrin-based nanoparticles, offer promising pathways for cancer therapy, chronic disease management, and personalized medicine. As research continues, cyclodextrins remain at the forefront of innovation in drug delivery systems, ensuring better patient outcomes and expanding the possibilities of modern therapeutics.

Cyclodextrins and Amino Acids Enhance Solubility and Tolerability of Retinoic Acid/Tretinoin: Molecular Docking, Physicochemical, Cytotoxicity, Scratch Assay, and Topical Gel Formulations Investigation

With increasing longevity globally, the search for effective and patient-friendly anti-aging solutions has been growing. Retinoic acid (Ret) is an FDA-approved anti-aging and anti-wrinkling formula, however, its poor solubility and poor tolerability hamper its use in cosmetically accepted formulations. In this study, cyclodextrins and arginine were investigated for improving the solubility and tolerability of retinoic acid through the formation of inclusion complexes and salt formation, respectively. Two different methods were employed: physical mixing and kneading. The prepared dispersions were investigated for molecular docking (MD), solubility, thermal and spectral analyses, cytotoxicity, and scratch assays. The optimized disperse systems were formulated in a gel formulation and characterized for rheological, in vitro release, and kinetics. The MD, DSC, and FTIR results indicated that both β- and hydroxy propyl (HP) β-cyclodextrins could host RA in their cavities and form inclusion complexes. Ret can form a salt with the basic amino acid arginine. Solubility studies of RA significantly (p < 0.01) enhanced by 14- to 81-fold increases with the investigated cyclodextrins and arginine. The cell viability recorded for Ret:HP β-CD K and Ret:arginine K was significantly increased compared to that for Ret alone. The IC50% recorded for azelaic acid (mild to non-irritant control), Ret, Ret:HP β-CD K, and Ret:arginine K were 1000, 485, 1100, and 895 µg/mL, respectively. The two carriers (HP β-CD and the amino acid arginine) were able to significantly (p < 0.05) reduce the irritation potential of Ret. Furthermore, comparable gap closure rates were recorded for Ret alone, Ret:HP β-CD K, and Ret:arginine K, indicating that inclusion complexation and ion pair formation reduced the irritation potentials without undermining the efficacy.

The counteracting influence of 2-hydroxypropyl substitution and the presence of a guest molecule on the shape and size of the β-cyclodextrin cavity

The aqueous solubility of β-cyclodextrin (β-CD), a cyclic carbohydrate comprising seven α-D-glucose molecules, is enhanced by 2-hydroxypropyl (2-HP) substitution of the hydroxyl groups at the CD rims. Our thorough analysis of the structural and solvation properties with different degrees of 2-hydroxypropyl substitution on β-CD using molecular dynamics simulations reveals that the solubility is enhanced at the cost of the structural distortion of the CD cyclic structure. Substitution at the secondary rim predominantly enhances the favourable interactions between CD and water by decreasing CD-CD hydrogen bonding and promoting CD-water hydrogen bonding. However, the effect of substitution at the primary rim on the CD-water interactions is minimal; the hydrogen bonds between water and the primary hydroxyl group in native CD merely get replaced by those between water and 2-HP, since the substitution makes the primary hydroxyl oxygen (O6 atom) inaccessible to water. In contrast, substitution at the primary rim maintains the structural integrity of CD, while substitution at the secondary rim results in structural distortion due to the disruption of the intramolecular hydrogen bond belt, even leading to cavity closure. Certain strategic substitutions of the primary hydroxyl groups can help in the reduction of structural distortion, depending upon the degree of substitution at the secondary hydroxyl rim. A detailed inspection of the simulation trajectory revealed that the tilting of glucose units with the primary hydroxyl oxygen (O6) pointing inward is the primary driver for cavity closure. Even though the dynamics of glucose tilting can influence the kinetics of host-guest complex formation, once the guest is well incorporated into the cavity, glucose tilting is inhibited and the cavity opens up as in native β-CD.

Cyclodextrins and derivatives in drug delivery: New developments, relevant clinical trials, and advanced products

Cyclodextrins (CD) and derivatives are functional excipients that can improve the bioavailability of numerous drugs. Because of their drug solubility improving properties they are used in many pharmaceutical products. Furthermore, the stability of small molecular drugs can be improved by the incorporation in CDs and an unpleasant taste and smell can be masked. In addition to well-established CD derivatives including hydroxypropyl-β-CD, hydroxypropyl-γ-CD, methylated- β-CD and sulfobutylated- β-CD, there are promising new derivatives in development. In particular, CD-based polyrotaxanes exhibiting cellular uptake enhancing properties, CD-polymer conjugates providing sustained drug release, enhanced cellular uptake, and mucoadhesive properties, and thiolated CDs showing mucoadhesive, in situ gelling, as well as permeation and cellular uptake enhancing properties will likely result in innovative new drug delivery systems. Relevant clinical trials showed various new applications of CDs such as the formation of CD-based nanoparticles, stabilizing properties for protein drugs or the development of ready-to-use injection systems. Advanced products are making use of various benefical properties of CDs at the same time. Within this review we provide an overview on these recent developments and take an outlook on how this class of excipients will further shape the landscape of drug delivery.

Assessing the greenification potential of cyclodextrin-based molecularly imprinted polymers for pesticides detection

Cyclodextrins, with their unparalleled attributes of eco-friendliness, natural abundance, versatile utility, and facile functionalization, make a paramount contribution to the field of molecular imprinting. Leveraging the unique properties of cyclodextrins in molecularly imprinted polymers synthesis has revolutionized the performance of molecularly imprinted polymers, resulting in enhanced adsorption selectivity, capacity, and rapid extraction of pesticides, while also circumventing conventional limitations. As the concern for food quality and safety continues to grow, the need for standard analytical methods to detect pesticides in food and environmental samples has become paramount. Cyclodextrins, being non-toxic and biodegradable, present an attractive option for greener reagents in imprinting polymers that can also ensure environmental safety post-application. This review provides a comprehensive summary of the significance of cyclodextrins in molecular imprinting for pesticide detection in food and environmental samples. The recent advancements in the synthesis and application of molecularly imprinted polymers using cyclodextrins have been critically analyzed. Furthermore, the current limitations have been meticulously examined, and potential opportunities for greenification with cyclodextrin applications in this field have been discussed. By harnessing the advantages of cyclodextrins in molecular imprinting, it is possible to develop highly selective and efficient methods for detecting pesticides in food and environmental samples while also addressing the challenges of sustainability and environmental impact.

An Update on Strategies to Deliver Protein and Peptide Drugs to the Eye

In the past few decades, advancements in protein engineering, biotechnology, and structural biochemistry have resulted in the discovery of various techniques that enhanced the production yield of proteins, targetability, circulating half-life, product purity, and functionality of proteins and peptides. As a result, the utilization of proteins and peptides has increased in the treatment of many conditions, including ocular diseases. Ocular delivery of large molecules poses several challenges due to their high molecular weight, hydrophilicity, unstable nature, and poor permeation through cellular and enzymatic barriers. The use of novel strategies for delivering protein and peptides such as glycoengineering, PEGylation, Fc-fusion, chitosan nanoparticles, and liposomes have improved the efficacy, safety, and stability, which consequently expanded the therapeutic potential of proteins. This review article highlights various proteins and peptides that are useful in ocular disorders, challenges in their delivery to the eye, and strategies to enhance ocular bioavailability using novel delivery approaches. In addition, a few futuristic approaches that will assist in the ocular delivery of proteins and peptides were also discussed.

Camptothecin: Solubility, In-Vitro Drug Release, and Effect on Human Red Blood Cells and Sperm Cold Preservation

BACKGROUND: Camptothecin (CPT) is an anticancer drug, and is not employed in the clinic because of its high hydrophobicity and low active form stability. CPT may also have potential for use in cold preservation. OBJECTIVE : To overcome these drawbacks, CPT solubility variations in the presence of cyclodextrins (CDs) and polyethylene glycol (PEG) were evaluated by Higuchi solubility experiments. MATERIALS AND METHODS: CPT was encapsulated in different cyclodextrins and polyethylene glycol using a co-evaporation method. The CPT interactions with CDs and PEG 6000 were investigated by Fourier-transformed infrared spectroscopy (FT-IR), and X-ray powder diffraction (XRPD). Then, CPT complexes were evaluated for in-vitro drug release. To evaluate the potential anticancer efficacy of the CPT complexes system, in-vitro cytotoxicity studies on human red blood cells were carried out using UV assay. The impact of the CPT complex systems on sperm motility protection during cold preservation at 4°C was studied using CASA. RESULTS: The dissolution profile of these preparations shows the improvement of the dissolution of the CPT following a fickien diffusion. The CPT solubility and stability improvement were the cause of the cytotoxicity on the red blood cells test. However, CPT alone, encapsulated, dispersed, and chemically modified protected spermatozoids during cold preservation. CONCLUSION: We confirm the interest in CPT encapsulated and dispersed in anticancer treatments. We also found that CPT encapsulated or dispersed could protect sperm against oxidative damage and improve the membrane integrity of human sperm. Consequently, CPT encapsulated our dispersed could eventually be beneficial for infertility therapy.

A Current Overview of Cyclodextrin-Based Nanocarriers for Enhanced Antifungal Delivery

Fungal infections are an extremely serious health problem, particularly in patients with compromised immune systems. Most antifungal agents have low aqueous solubility, which may hamper their bioavailability. Their complexation with cyclodextrins (CDs) could increase the solubility of antifungals, facilitating their antifungal efficacy. Nanoparticulate systems are promising carriers for antifungal delivery due to their ability to overcome the drawbacks of conventional dosage forms. CD-based nanocarriers could form beneficial combinations of CDs and nanoparticulate platforms. These systems have synergistic or additive effects regarding improved drug loading, enhanced chemical stability, and enhanced drug permeation through membranes, thereby increasing the bioavailability of drugs. Here, an application of CD in antifungal drug formulations is reviewed. CD-based nanocarriers, such as nanoparticles, liposomes, nanoemulsions, nanofibers, and in situ gels, enhancing antifungal activity in a controlled-release manner and possessing good toxicological profiles, are described. Additionally, the examples of current, updated CD-based nanocarriers loaded with antifungal drugs for delivery by various routes of administration are discussed and summarized.

A rotaxane-based platform for tailoring the pharmacokinetics of cancer-targeted radiotracers

Radiolabelled monoclonal antibodies (mAbs) are a cornerstone of molecular diagnostic imaging and targeted radioimmunotherapy in nuclear medicine, but one of the major challenges in the field is to identify ways of reducing the radiation burden to patients. We reasoned that a rotaxane-based platform featuring a non-covalent mechanical bond between the radionuclide complex and the biologically active mAb could offer new ways of controlling the biophysical properties of cancer-specific radiotracers for positron emission tomography (PET). Herein, we present the photoradiosynthesis and characterisation of [⁸⁹Zr]ZrFe-[4]rotaxane-azepin-onartuzumab ([⁸⁹Zr]ZrFe-2), a unique rotaxane-antibody conjugate for PET imaging and quantification of the human hepatocyte growth factor receptor (c-MET). Multiple component self-assembly reactions were combined with simultaneous ⁸⁹Zr-radiolabelling and light-induced bioconjugation methods to give [⁸⁹Zr]ZrFe-2 in 15 ± 1% (n = 3) decay-corrected radiochemical yield, with >90% radiochemical purity, and molar activities suitable for PET imaging studies (>6.1 MBq mg^-1 of protein). Cellular assays confirmed the specificity of [⁸⁹Zr]ZrFe-2 binding to the c-MET receptor. Temporal PET imaging in athymic nude mice bearing subcutaneous MKN-45 gastric adenocarcinoma xenografts demonstrated specific binding of [⁸⁹Zr]ZrFe-2 toward c-MET in vivo, where tumour uptake reached 9.8 ± 1.3 %ID g^-1 (72 h, n = 5) in a normal group and was reduced by ∼56% in a control (blocking) group. Head-to-head comparison of the biodistribution and excretion profile of [⁸⁹Zr]ZrFe-2versus two control compounds, alongside characterisation of two potential metabolites, showed that the rotaxane-radiotracer has an improved clearance profile with higher tumour-to-tissue contrast ratios and reduced radiation exposure to critical (dose-limiting) organs including liver, spleen, and kidneys. Collectively, the experimental results suggested that non-covalent mechanical bonds between the radionuclide and mAb can be used to fine-tune the pharmacokinetic profile of supramolecular radiopharmaceuticals in ways that are simply not accessible when using traditional covalent design.

Design, Preparation and Evaluation of Supramolecular Complexes with Curcumin for Enhanced Cytotoxicity in Breast Cancer Cell Lines

Curcumin is one of the most researched phytochemicals by pharmacologists and formulation scientists to unleash its potential therapeutic benefits and tackle inherent biopharmaceutic problems. In this study, the native β-cyclodextrin (CD) and three derivatives, namely, Captisol (sulfobutyl ether β-CD), hydroxypropyl β-cyclodextrin, and hydroxyethyl β-cyclodextrin were investigated for inclusion complexes with curcumin using two preparation methods (physical mixing and solvent evaporation). The prepared complexes were studied for docking, solubility, FTIR, DSC, XRD, and dissolution rates. The best-fitting curcumin: cyclodextrins (the latter of the two CDs) were evaluated for cytotoxicity using human breast cell lines (MCF-7). Dose-dependent cytotoxicity was recorded as IC50% for curcumin, curcumin: hydroxyethyl β-cyclodextrin, and curcumin: hydroxypropyl β-cyclodextrin were 7.33, 7.28, and 19.05 µg/mL, respectively. These research findings indicate a protective role for the curcumin: hydroxypropyl β-cyclodextrin complex on the direct cell lines of MCF-7.

Improvement in Solubility-Permeability Interplay of Psoralens from Brosimum gaudichaudii Plant Extract upon Complexation with Hydroxypropyl-β-cyclodextrin

Psoralen (PSO) and 5-methoxypsoralen (5-MOP) are widely used drugs in oral photochemotherapy against vitiligo and major bioactive components of root bark extract of Brosimum gaudichaudii Trécul (EBGT), previously standardized by LC-MS. However, the exceptionally low water solubility of these psoralens can cause incomplete and variable bioavailability limiting their applications and patient adherence to treatment. Therefore, the purpose of this work was to investigate the effects of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) inclusion complex on the solubility and jejunal permeability of PSO and 5-MOP from EBGT. Characterization of inclusion complexes were evaluated by current methods in nuclear magnetic resonance studies on aqueous solution, Fourier transform infrared spectroscopy, thermal analysis, and scanning electron microscopy in solid state. Ex vivo rat jejunal permeability was also investigated and compared for both pure psoralens and plant extract formulation over a wide HP-β-CD concentration range (2.5 to 70 mM). Phase solubility studies of the PSO- and 5-MOP-HP-β-CD inclusion complex showed 1:1 inclusion complex formation with small stability constants (Kc < 500 M−1). PSO and 5-MOP permeability rate decreased after adding HP-β-CD by 6- and 4-fold for pure standards and EBGT markers, respectively. Nevertheless, the complexation with HP-β-CD significantly improved solubility of PSO (until 10-fold) and 5-MOP (until 31-fold). As a result, the permeability drop could be overcome by solubility augmentation, implying that the HP-β-CD inclusion complexes with PSO, 5-MOP, or EBGT can be a valuable tool for designing and developing novel oral drug product formulation containing these psoralens for the treatment of vitiligo.

Vitamin A fortification: Recent advances in encapsulation technologies

Vitamin A is an essential micronutrient whose deficiency is still a major health concern in many regions of the world. It plays an essential role in human growth and development, immunity, and vision, but may also help prevent several other chronic diseases. The total amount of vitamin A in the human diet often falls below the recommended dietary allowance of approximately 900-1000 μ $ \umu $ g/day for a healthy adult. Moreover, a significant proportion of vitamin A may be degraded during food processing, storage, and distribution, thereby reducing its bioactivity. Finally, the vitamin A in some foods has a relatively low bioavailability, which further reduces its efficacy. The World Health Organization has recommended fortification of foods and beverages as a safe and cost-effective means of addressing vitamin A deficiency. However, there are several factors that must be overcome before effective fortified foods can be developed, including the low solubility, chemical stability, and bioavailability of this oil-soluble vitamin. Consequently, strategies are required to evenly disperse the vitamin throughout food matrices, to inhibit its chemical degradation, to avoid any adverse interactions with any other food components, to ensure the food is palatable, and to increase its bioavailability. In this review article, we discuss the chemical, physical, and nutritional attributes of vitamin A, its main dietary sources, the factors contributing to its current deficiency, and various strategies to address these deficiencies, including diet diversification, biofortification, and food fortification.

Bi-polymeric Spongy Matrices Through Cross-linking Polymerization: Synthesized and Evaluated for Solubility Enhancement of Acyclovir

In this study, two hydrophilic polymers hydroxypropyl methyl cellulose and beta-cyclodextrin (β-CD) are used to synthesize highly responsive and spongy polymeric matrices. Porous and stimulus-responsive polymeric network was developed to improve the solubility of acyclovir (ACV) at significant level. Grafting was successfully carried out by free radical polymerization technique. Spongy matrices were characterized by percentage entrapment efficiency, drug loading, solubility studies, FTIR, powder X-ray diffraction, TGA, DSC, XRD, SEM, swelling studies, and in vitro studies. Acute oral toxicity studies were conducted to determine the safety of oral administration of prepared HPMC-βCD-g-poly(AMPS) formulation. Porous and spongy structures were depicted in SEM images. Complex formation and thermal stability of constituents and drug (ACV) were analyzed by FTIR, TGA, and DSC spectra. XRD analysis revealed reduction in acyclovir crystallinity in spongy matrices. Particle size of optimized formulation was found in the range of 197 ± 2.55 nm. The momentous difference with reference product committed that drug solubility and release characteristics were markedly enhanced by the developed spongy matrices. Toxicity studies endorsed that developed spongy matrices were non-toxic and compatible to biological system. The efficient method of preparation, enhanced solubility, excellent physico-chemical characteristics, high dissolution, and non-toxic HPMC-βCD-g-poly(AMPS) spongy matrices may be a promising approach for oral delivery of poorly soluble drugs.

Fate of β-Carotene within Loaded Delivery Systems in Food: State of Knowledge

Nanotechnology has opened new opportunities for delivering bioactive agents. Their physiochemical characteristics, i.e., small size, high surface area, unique composition, biocompatibility and biodegradability, make these nanomaterials an attractive tool for β-carotene delivery. Delivering β-carotene through nanoparticles does not only improve its bioavailability/bioaccumulation in target tissues, but also lessens its sensitivity against environmental factors during processing. Regardless of these benefits, nanocarriers have some limitations, such as variations in sensory quality, modification of the food matrix, increasing costs, as well as limited consumer acceptance and regulatory challenges. This research area has rapidly evolved, with a plethora of innovative nanoengineered materials now being in use, including micelles, nano/microemulsions, liposomes, niosomes, solidlipid nanoparticles, nanostructured lipids and nanostructured carriers. These nanodelivery systems make conventional delivery systems appear archaic and promise better solubilization, protection during processing, improved shelf-life, higher bioavailability as well as controlled and targeted release. This review provides information on the state of knowledge on β-carotene nanodelivery systems adopted for developing functional foods, depicting their classifications, compositions, preparation methods, challenges, release and absorption of β-carotene in the gastrointestinal tract (GIT) and possible risks and future prospects.

A One-Step Twin-Screw Melt Granulation with Gelucire 48/16 and Surface Adsorbent to Improve the Solubility of Poorly Soluble Drugs: Effect of Formulation Variables on Dissolution and Stability

Fenofibrate is an effective lipid-lowering drug; however, its poor solubility and high log p (5.2) result in insufficient absorption from the gastrointestinal tract, leading to poor bioavailability. In this study, a one-step continuous twin-screw melt granulation process was investigated to improve the solubility and dissolution of fenofibrate using Gelucire® 48/16 and Neusilin® US2 as the solubilizer and surface adsorbent, respectively. The formulations (granules) were prepared at different ratios of fenofibrate, Gelucire® 48/16, and Neusilin® US2 based on phase-solubility studies and characterized using dissolution, differential scanning calorimetry, powder X-ray diffraction, and scanning electron microscopy analyses and studies on flow properties. In the phase-solubility studies, a linear relation was observed between Gelucire® 48/16 concentration and the amount of fenofibrate dissolved. In contrast, the dissolution rate of the prepared formulations was independent of the fenofibrate: Gelucire® 48/16 ratio and dependent on the Neusilin® US2 levels in the formulation. Increasing Neusilin® US2 levels decreased the rate of dissolution of the granules but improved the stability of the tablets under storage at accelerated stability conditions. Interestingly, higher Gelucire® 48/16 levels in the granules resulted in tablets with a hard matrix, which slowed disintegration and dissolution. All formulations exhibited improved dissolution compared to pure fenofibrate.

Technological evolution of cyclodextrins in the pharmaceutical field

We herein disclose how global cyclodextrin-based pharmaceutical technologies have evolved since the early 80s through a 1998 patents dataset retrieved from Derwent Innovation Index. We used text-mining techniques based on the patents semantic content to extract the knowledge contained therein, to analyze technologies related to the principal attributes of CDs: solubility, stability, and taste-masking enhancement. The majority of CDs pharmaceutical technologies are directed toward parenteral aqueous solutions. The development of oral and ocular formulations is rapidly growing, while technologies for nasal and pulmonary routes are emerging and seem to be promising. Formulations for topical, transdermal, vaginal, and rectal routes do not account for a high number of patents, but they may be hiding a great potential, representing opportunity research areas. Certainly, the progress in materials sciences, supramolecular chemistry, and nanotechnology, will influence the trend of that, apparently neglected, research. The bottom line, CDs pharmaceutical technologies are still increasing, and this trend is expected to continue in the coming years.

Patent monitoring allows the identification of relevant technologies and trends to prioritize research, development, and investment in both, academia and industry. We expect the scope of this approach to be applied in the pharmaceutical field beyond CDs technological applications.

Comparative studies of the effects of novel excipients amino acids with cyclodextrins on enhancement of dissolution and oral bioavailability of the non-ionizable drug carbamazepine

Despite significant innovations in pharmaceutical industries, low water solubility is still a common biopharmaceutics-related problem that encounters 40% of marketed pharmaceutical products and results in erratic oral absorption and low bioavailability. Poorly soluble non-ionizable drugs pose additional challenges for enhancing solubility of this class of drugs. The effects of small molecular weight carriers such as amino acids (glycine, L-threonine; L-lysine and aspartic acid) on solubilization and enhancing bioavailability of Carbamazepine (Car) were investigated and compared to the more known excipients cyclodextrins (β-CD, HPβ-CD and γ-CD). Drug-carrier PM and Coppt in 1:1 molar ratio were prepared; characterized for docking, solubility, DSC, FTIR, XRD and dissolution rate; and evaluated for their oral bioavailability. Molecular docking calculations, spectral and thermal analysis confirmed Car-Amino acids ion pair complexes and Car-CDs inclusion complexes. While dissolution rate enhancement factors recorded for both CDs and amino acids were up to 12-times; additional permeation enhancing mechanism could explain superior relative bioavailability by approximately 170% for Car: Amino acid complexes and 166% for Car: CDs compared with Car alone. This study warrants the use of amino acids as a promising small molecular weight and versatile water-soluble carrier for enhancing solubility/permeability and bioavailability for this non-ionizable drug. This might endow the formulator flexibility in the design and dosage form with less bulky economic and more patient friendly solid platform for those epileptic patients and/or elderly patients that can experience difficulty in swallowing and need rapid onset of action.

The Solubility-Permeability Interplay for Solubility-Enabling Oral Formulations

The Biopharmaceutical classification system (BCS) classifies the drugs based on their intrinsic solubility and intestinal permeability. The drugs with good solubility and intestinal permeability have good bioavailability. The drugs with poor solubility and poor permeability have solubility dependent and permeability dependent bioavailability, respectively. In the current pharmaceutical field, most of the drugs have poor solubility. To solve the problem of poor solubility, various solubility enhancement approaches have been successfully used. The effects of these solubility enhancing approaches on the intestinal permeability of the drugs are a matter of concern, and must not be overlooked. The current review article focuses on the effect of various solubility enhancing approaches viz. cyclodextrin, surfactant, cosolvent, hydrotropes, and amorphous solid dispersion, on the intestinal permeability of drugs. This article will help in the designing of the optimized formulations having balanced solubility enhancement without affecting the permeability of drugs.

Physicochemical Characterization, Molecular Docking, and In Vitro Dissolution of Glimepiride-Captisol Inclusion Complexes

This present study investigated the effect of Captisol, a chemically modified cyclodextrin, on the in vitro dissolution of glimepiride. We prepared glimepiride-Captisol complexes of different mass ratios (1:1, 1:2, and 1:3 w/w) by a physical mixing or freeze-drying technique, and found that complexation with Captisol enhanced the water solubility of glimepiride. Molecular docking and dynamic simulation predicted complex formation; at the same time, Fourier transform infrared spectroscopy, differential scanning calorimetry, powder X-ray diffractometry, and scanning electron microscope indicated molecular interactions that support complexation. We also found that an inclusion complex was better than a physical mixture in enhancing the complexation of glimepiride with Captisol and enhancing water solubility. Phase solubility study of the glimepiride-Captisol complex showed an A_L-type profile, implying the formation of a 1:1 inclusion complex. The study also revealed that pH influenced the stability of the complex because the stability constant of the glimepiride-Captisol complex was higher in distilled water of pH ∼6.0 than in phosphate buffer of pH 7.2.

Progress in the design and development of "fast-dissolving" electrospun nanofibers based drug delivery systems - A systematic review

Electrospinning has emerged as most viable approach for the fabrication of nanofibers with several beneficial features that are essential to various applications ranging from environment to biomedicine. The electrospun nanofiber based drug delivery systems have shown tremendous advancements over the controlled and sustained release complemented from their high surface area, tunable porosity, mechanical endurance, offer compatible environment for drug encapsulation, biocompatibility, high drug loading and tailorable release characteristics. The dosage formulation of poorly water-soluble drugs often faces several challenges including complete dissolution with maximum therapeutic efficiency over a short period of time especially through oral administration. In this context, challenges associated with the dosage formulation of poorly-water soluble drugs can be addressed through combining the beneficial features of electrospun nanofibers. This review describes major developments progressed in the preparation of electrospun nanofibers based "fast dissolving" drug delivery systems by employing variety of polymers, drug molecules and encapsulation approaches with primary focus on oral delivery. Furthermore, the review also highlights current scientific challenges and provide an outlook with regard to future prospectus.

Development of effective AmB/AmB-αCD complex double loaded liposomes using a factorial design for systemic fungal infection treatment

Amphotericin B (AmB) is a very potent antibiotic which still remains as the gold standard for the treatment of systemic fungal infections. AmB is a member of Biopharmaceutical Classification System Class IV, mainly characterized by its poor solubility and low permeability. In this study, AmB/AmB-α cyclodextrin complex double loaded liposomes (DLLs) were developed using the design of experiments (DoE®) approach to optimize/determine the effects of lipid composition and other parameters on final product properties such as encapsulation efficacy, particle size, polydispersity index, and zeta potential. Experimental design 2⁴ was used for optimization of these properties in which four factors were studied in two levels. DLLs showed much higher physical stability than liposomes loaded only with free AmB by the means of particle size, zeta potential and encapsulation efficiency, in addition exhibited sustained release of AmB over 72 h (26.7%) with faster onset time. On the other hand, fourfold improved antimicrobial efficiency, minimum inhibitory concentration (0.125 µg/ml), and minimum fungicidal concentration (0.5 µg/ml) was determined by DLLs against C. albicans compared to Ambisome^®. Dose dependent effects of the DLLs were investigated by cytotoxicity studies on Vero and L-929 cells. No significant cytotoxicity observed for AmB/AmB-αCD complex DLLs and Ambisome at tested concentrations while free AmB caused severe cytotoxicity. Lastly the developed DLLs did not cause an increase in NGAL (an early biomarker for acute kidney toxicity) levels for both Vero and HK-2 cell lines compared to free AmB.

Synthesis, Characterization, and Drug Delivery Application of Self-assembling Amphiphilic Cyclodextrin

The main aim of the research was to synthesize amphiphilic cyclodextrin (AMCD) by substituting C12 alkyl chain to a β-cyclodextrin (βCD) in a single step and to study its self-assembly in an aqueous medium. The drug delivery application of the AMCD was also evaluated by encapsulating tamoxifen citrate as a model hydrophobic drug. AMCD was able to self-assemble in aqueous media, forming nanovesicles of size < 200 nm, capable of encapsulating tamoxifen citrate (TMX). Molecular docking and MD simulation studies revealed the interaction between TMX and AMCD which formed a stable complex. TEM and AFM studies showed that nanovesicles were perfectly spherical having a smooth surface and a theoretical AMCD bilayer thickness of ~ 7.2 nm as observed from SANS studies. XRD and DSC studies revealed that TMX was amorphized and molecularly dispersed in AMCD bilayer which was released slowly following Fickian diffusion. AMCD has excellent hemocompatibility as opposed to βCD and no genotoxicity. IC₅₀ of TMX against MCF-7 cell lines was significantly reduced from 11.43 to 7.96 μg/ml after encapsulation in nanovesicle because of nanovesicles being endocytosed by the MCF-7 cells. AMCD was well tolerated by IV route at a dose of > 2000 mg/kg in rats. Pharmacokinetic profile of TMX after encapsulation was improved giving 3-fold higher AUC; extended mean residence time is improving chances of nanovesicle to extravasate in tumor via EPR effect.

Penetration Enhancers in Ocular Drug Delivery

There are more than 100 recognized disorders of the eye. This makes the development of advanced ocular formulations an important topic in pharmaceutical science. One of the ways to improve drug delivery to the eye is the use of penetration enhancers. These are defined as compounds capable of enhancing drug permeability across ocular membranes. This review paper provides an overview of anatomical and physiological features of the eye and discusses some common ophthalmological conditions and permeability of ocular membranes. The review also presents the analysis of literature on the use of penetration-enhancing compounds (cyclodextrins, chelating agents, crown ethers, bile acids and bile salts, cell-penetrating peptides, and other amphiphilic compounds) in ocular drug delivery, describing their properties and modes of action.

Sortase-click strategy for defined protein conjugation on a heptavalent cyclodextrin scaffold

Multivalent proteins or protein dendrimers are useful for clinical and biotechnological applications. However, assembly of chemically defined protein dendrimers is a challenging endeavor. In the past, majority of protein dendrimers have been developed on branched lysine scaffolds and are usually limited to a valency of two to four. The naturally occurring cyclodextrin (CD) scaffold composed of 6–8 glucose units offers the possibility of expanding the valency. Here we have adapted a chemoenzymatic-click strategy for displaying heptavalent peptides and large proteins on the β-cyclodextrin (β-CD) scaffold. We demonstrate that recombinant proteins (engineered with a LPXTG pentapeptide motif at the carboxy terminus), labeled with an alkyne moiety by sortase-mediated ligation, can be easily clicked on to the azide-derivatized β-cyclodextrin through the Huisgen cycloaddition reaction yielding a well-defined heptavalent display of proteins.

Methyl-β-cyclodextrin, an actin depolymerizer augments the antiproliferative potential of microtubule-targeting agents

Methyl-β-cyclodextrin (MCD), an established pharmacological excipient, depolymerizes the actin cytoskeleton. In this work, we investigated the effect of MCD-mediated actin depolymerization on various cellular phenotypes including traction force, cell stiffness, focal adhesions, and intracellular drug accumulation. In addition to a reduction in the contractile cellular traction, MCD acutely inhibits the maturation of focal adhesions. Alteration of contractile forces and focal adhesions affects the trypsin-mediated detachment kinetics of cells. Moreover, MCD-mediated actin depolymerization increases the intracellular accumulation of microtubule-targeting agents (MTAs) by ~50% with respect to the untreated cells. As MCD treatment enhances the intracellular concentration of drugs, we hypothesized that the MCD-sensitized cancer cells could be effectively killed by low doses of MTAs. Our results in cervical, breast, hepatocellular, prostate cancer and multidrug-resistant breast cancer cells confirmed the above hypothesis. Further, the combined use of MCD and MTAs synergistically inhibits the proliferation of tumor cells. These results indicate the potential use of MCD in combination with MTAs for cancer chemotherapy and suggest that targeting both actin and microtubules simultaneously may be useful for cancer therapy. Importantly, the results provide significant insight into the crosstalk between actin and microtubules in regulating the traction force and dynamics of cell deadhesion.

Encapsulation of Thymol in cyclodextrin nano-cavities: A multi spectroscopic and theoretical study

Cyclodextrins have a wide range of applications in different areas of drug delivery and pharmaceutical industry due to their complexation ability and other versatile characteristics. Here we have studied the binding interactions of a small biologically important phenolic molecule, Thymol (Th), with both α and β cyclodextrins (CDs), which are well known drug delivery vehicles. Extent of encapsulation has been determined using several spectroscopic techniques. In fluorescence experiments, significant increase in fluorescence intensities have been discerned for both the CDs but there had been a much early saturation for αCD. Anisotropy experiments have been performed too and very surprisingly no appreciable increase in anisotropy value was observed in either case. Isothermal titration calorimetry (ITC) data, however, show signature of binding of Th with the βCD. These intriguing results were explained with the help of molecular docking and dynamics simulation studies. The docking calculations have shown that Th goes inside both α and βCD. In keeping with the final NMR data and molecular dynamics we have ultimately concluded that solvated Th molecules are the main participants in the interaction with CDs which is responsible for these intriguing behaviors. Finally we have also performed an antioxidant assay to reveal the practical application of such encapsulation. It has been found that on encapsulation there is an enhancement of the antioxidant behavior of Th. Then we have also performed an antibacterial assay to show the unchanged antibacterial properties of Th on encapsulation. Hence it can be deduced that Th can be safely delivered through CDs in living system without hampering its beneficial properties.

Multicomponent cyclodextrin system for improvement of solubility and dissolution rate of poorly water soluble drug

The purpose of the present study was to investigate the interaction of Cinnarizine (CIN) with Hydroxypropyl-β-Cyclodextrin (HPβCD) in the presence of Hydroxy Acids (HA). Various binary and ternary systems of CIN with HPβCD and HA were prepared by kneading and coevaporation methods. For the ternary systems, HA were tried in three different concentrations. The interaction in solution phase was studied in detail by the phase solubility method, and the solid phase interactions were characterized by Fourier Transform Infrared (FTIR) spectroscopy, Differential Scanning Calorimetry (DSC), X-Ray Diffractometry (XRD), Scanning Electron Microscopy (SEM) and Proton Nuclear Magnetic Resonance (1H-NMR). Phase solubility revealed the positive effect of HA on the complexation of CIN with HPβCD. Solid phase characterization confirmed the formation of inclusion complex in the ternary systems. Solubility and dissolution studies illustrated that out of three different concentrations tried, HA were most effective at the 1 M concentration level. Ternary systems were very effective in improving the solubility as well as dissolution profile of CIN than the CIN-HPβCD binary systems. FTIR, 1H-NMR and Molecular docking studies gave some insight at molecular level that actually which part of CIN was interacting with the HPβCD. Molecular docking and free energy calculation even enlighten the role of tartaric acid in increasing solubility of CIN in the ternary system.

Design of cyclodextrin-based systems for intervention execution

Technologies for nucleic acid delivery have displayed high practical potential in mediating genetic manipulation to modulate metabolic pathways to combat aging. In the previous chapter, we have delineated a series of techniques for designing and developing polymeric vectors as nonviral carriers. Based on what we have discussed, this chapter will introduce how the delivery performance and versatility of polymeric vectors can be further enhanced by using cyclodextrins (CDs). Over the years, CDs have shown promising application potential in different areas, ranging from controlled drug release to chiral separation of basic drugs. These applications are largely mediated by the ability of CDs to undergo host–guest inclusion complexation. Upon incorporation of CDs into the design of a polymeric vector, not only can the flexibility of the design be increased, but the development of a multifunctional carrier for genetic manipulation can also be facilitated.

Lipophilicity and hydrophobicity considerations in bio-enabling oral formulations approaches – a PEARRL review

Objectives

This review highlights aspects of drug hydrophobicity and lipophilicity as determinants of different oral formulation approaches with specific focus on enabling formulation technologies. An overview is provided on appropriate formulation selection by focussing on the physicochemical properties of the drug.

Key findings

Crystal lattice energy and the octanol–water partitioning behaviour of a poorly soluble drug are conventionally viewed as characteristics of hydrophobicity and lipophilicity, which matter particularly for any dissolution process during manufacturing and regarding drug release in the gastrointestinal tract. Different oral formulation strategies are discussed in the present review, including lipid-based delivery, amorphous solid dispersions, mesoporous silica, nanosuspensions and cyclodextrin formulations.

Summary

Current literature suggests that selection of formulation approaches in pharmaceutics is still highly dependent on the availability of technological expertise in a company or research group. Encouraging is that, recent advancements point to more structured and scientifically based development approaches. More research is still needed to better link physicochemical drug properties to pharmaceutical formulation design.