SNP annotation-based whole genomic prediction and selection: an application to feed efficiency and its component traits in pigs

A Single-Step Genome-Wide Association Study for Semen Traits of Egyptian Buffalo Bulls

The present study aimed to contribute to the limited research on buffalo (Bubalus bubalis) semen traits by incorporating genomic data. A total of 8465 ejaculates were collected. The genotyping procedure was conducted using the Axiom® Buffalo Genotyping 90 K array designed by the Affymetrix Expert Design Program. After conducting a quality assessment, we utilized 67,282 SNPs genotyped in 192 animals. We identified several genomic loci explaining high genetic variance by employing single-step genomic evaluation. The aforementioned regions were located on buffalo chromosomes no. 3, 4, 6, 7, 14, 16, 20, 22, and the X-chromosome. The X-chromosome exhibited substantial influence, accounting for 4.18, 4.59, 5.16, 5.19, and 4.31% of the genomic variance for ejaculate volume, mass motility, livability, abnormality, and concentration, respectively. In the examined genomic regions, we identified five novel candidate genes linked to male fertility and spermatogenesis, four in the X-chromosome and one in chromosome no. 16. Additional extensive research with larger sample sizes and datasets is imperative to validate these findings and evaluate their applicability for genomic selection.

Utilizing Variants Identified with Multiple Genome-Wide Association Study Methods Optimizes Genomic Selection for Growth Traits in Pigs

Improving the prediction accuracies of economically important traits in genomic selection (GS) is a main objective for researchers and breeders in the livestock industry. This study aims at utilizing potentially functional SNPs and QTLs identified with various genome-wide association study (GWAS) models in GS of pig growth traits. We used three well-established GWAS methods, including the mixed linear model, Bayesian model and meta-analysis, as well as 60K SNP-chip and whole genome sequence (WGS) data from 1734 Yorkshire and 1123 Landrace pigs to detect SNPs related to four growth traits: average daily gain, backfat thickness, body weight and birth weight. A total of 1485 significant loci and 24 candidate genes which are involved in skeletal muscle development, fatty deposition, lipid metabolism and insulin resistance were identified. Compared with using all SNP-chip data, GS with the pre-selected functional SNPs in the standard genomic best linear unbiased prediction (GBLUP), and a two-kernel based GBLUP model yielded average gains in accuracy by 4 to 46% (from 0.19 ± 0.07 to 0.56 ± 0.07) and 5 to 27% (from 0.16 ± 0.06 to 0.57 ± 0.05) for the four traits, respectively, suggesting that the prioritization of preselected functional markers in GS models had the potential to improve prediction accuracies for certain traits in livestock breeding.

Application of Genetic, Genomic and Biological Pathways in Improvement of Swine Feed Efficiency

Despite the significant improvement of feed efficiency (FE) in pigs over the past decades, feed costs remain a major challenge for producers profitability. Improving FE is a top priority for the global swine industry. A deeper understanding of the biology underlying FE is crucial for making progress in genetic improvement of FE traits. This review comprehensively discusses the topics related to the FE in pigs including: measurements, genetics, genomics, biological pathways and the advanced technologies and methods involved in FE improvement. We first provide an update of heritability for different FE indicators and then characterize the correlations of FE traits with other economically important traits. Moreover, we present the quantitative trait loci (QTL) and possible candidate genes associated with FE in pigs and outline the most important biological pathways related to the FE traits in pigs. Finally, we present possible ways to improve FE in swine including the implementation of genomic selection, new technologies for measuring the FE traits, and the potential use of genome editing and omics technologies.

Improvement of prediction ability by integrating multi-omic datasets in barley

Background

Genomic prediction (GP) based on single nucleotide polymorphisms (SNP) has become a broadly used tool to increase the gain of selection in plant breeding. However, using predictors that are biologically closer to the phenotypes such as transcriptome and metabolome may increase the prediction ability in GP. The objectives of this study were to (i) assess the prediction ability for three yield-related phenotypic traits using different omic datasets as single predictors compared to a SNP array, where these omic datasets included different types of sequence variants (full-SV, deleterious-dSV, and tolerant-tSV), different types of transcriptome (expression presence/absence variation-ePAV, gene expression-GE, and transcript expression-TE) sampled from two tissues, leaf and seedling, and metabolites (M); (ii) investigate the improvement in prediction ability when combining multiple omic datasets information to predict phenotypic variation in barley breeding programs; (iii) explore the predictive performance when using SV, GE, and ePAV from simulated 3’end mRNA sequencing of different lengths as predictors.

Results

The prediction ability from genomic best linear unbiased prediction (GBLUP) for the three traits using dSV information was higher than when using tSV, all SV information, or the SNP array. Any predictors from the transcriptome (GE, TE, as well as ePAV) and metabolome provided higher prediction abilities compared to the SNP array and SV on average across the three traits. In addition, some (di)-similarity existed between different omic datasets, and therefore provided complementary biological perspectives to phenotypic variation. Optimal combining the information of dSV, TE, ePAV, as well as metabolites into GP models could improve the prediction ability over that of the single predictors alone.

Conclusions

The use of integrated omic datasets in GP model is highly recommended. Furthermore, we evaluated a cost-effective approach generating 3’end mRNA sequencing with transcriptome data extracted from seedling without losing prediction ability in comparison to the full-length mRNA sequencing, paving the path for the use of such prediction methods in commercial breeding programs.

Supplementary Information

The online version contains supplementary material available at (10.1186/s12864-022-08337-7).

Genic and non-genic SNP contributions to additive and dominance genetic effects in purebred and crossbred pig traits

The present research has estimated the additive and dominance genetic variances of genic and intergenic segments for average daily gain (ADG), backfat thickness (BFT) and pH of the semimembranosus dorsi muscle (PHS). Further, the predictive performance using additive and additive dominance models in a purebred Piétrain (PB) and a crossbred (Piétrain × Large White, CB) pig population was assessed. All genomic regions contributed equally to the additive and dominance genetic variations and lead to the same predictive ability that did not improve with the inclusion of dominance genetic effect and inbreeding in the models. Using all SNPs available, additive genotypic correlations between PB and CB performances for the three traits were high and positive (> 0.83) and dominance genotypic correlation was very inaccurate. Estimates of dominance genotypic correlations between all pairs of traits in both populations were imprecise but positive for ADG-BFT in CB and BFT-PHS in PB and CB with a high probability (> 0.98). Additive and dominance genotypic correlations between BFT and PHS were of different sign in both populations, which could indicate that genes contributing to the additive genetic progress in both traits would have an antagonistic effect when used for exploiting dominance effects in planned matings.

Genomic prediction of preliminary yield trials in chickpea: Effect of functional annotation of SNPs and environment

Achieving yield potential in chickpea (Cicer arietinum L.) is limited by many constraints that include biotic and abiotic stresses. Combining next-generation sequencing technology with advanced statistical modeling has the potential to increase genetic gain efficiently. Whole genome resequencing data was obtained from 315 advanced chickpea breeding lines from the Australian chickpea breeding program resulting in more than 298,000 single nucleotide polymorphisms (SNPs) discovered. Analysis of population structure revealed a distinct group of breeding lines with many alleles that are absent from recently released Australian cultivars. Genome-wide association studies (GWAS) using these Australian breeding lines identified 20 SNPs significantly associated with grain yield in multiple field environments. A reduced level of nucleotide diversity and extended linkage disequilibrium suggested that some regions in these chickpea genomes may have been through selective breeding for yield or other traits. A large introgression segment that introduced from C. echinospermum for phytophthora root rot resistance was identified on chromosome 6, yet it also has unintended consequences of reducing yield due to linkage drag. We further investigated the effect of genotype by environment interaction on genomic prediction of yield. We found that the training set had better prediction accuracy when phenotyped under conditions relevant to the targeted environments. We also investigated the effect of SNP functional annotation on prediction accuracy using different subsets of SNPs based on their genomic locations: regulatory regions, exome, and alternative splice sites. Compared with the whole SNP dataset, a subset of SNPs did not significantly decrease prediction accuracy for grain yield despite consisting of a smaller number of SNPs.

Single-Trait and Multiple-Trait Genomic Prediction From Multi-Class Bayesian Alphabet Models Using Biological Information

Genomic prediction has been widely used in multiple areas and various genomic prediction methods have been developed. The majority of these methods, however, focus on statistical properties and ignore the abundant useful biological information like genome annotation or previously discovered causal variants. Therefore, to improve prediction performance, several methods have been developed to incorporate biological information into genomic prediction, mostly in single-trait analysis. A commonly used method to incorporate biological information is allocating molecular markers into different classes based on the biological information and assigning separate priors to molecular markers in different classes. It has been shown that such methods can achieve higher prediction accuracy than conventional methods in some circumstances. However, these methods mainly focus on single-trait analysis, and available priors of these methods are limited. Thus, in both single-trait and multiple-trait analysis, we propose the multi-class Bayesian Alphabet methods, in which multiple Bayesian Alphabet priors, including RR-BLUP, BayesA, BayesB, BayesCΠ, and Bayesian LASSO, can be used for markers allocated to different classes. The superior performance of the multi-class Bayesian Alphabet in genomic prediction is demonstrated using both real and simulated data. The software tool JWAS offers open-source routines to perform these analyses.

Validation of the Prediction Accuracy for 13 Traits in Chinese Simmental Beef Cattle Using a Preselected Low-Density SNP Panel

Simple Summary

To reduce the breeding costs and promote the application of genomic selection (GS) in Chinese Simmental beef cattle, we developed a customized low-density single-nucleotide polymorphism (SNP) panel consisting of 30,684 SNPs. When comparing the predictive performance of the low-density SNP panel to that of the BovineHD Beadchip for 13 traits, we found that this ~30 K panel achieved moderate to high prediction accuracies for most traits, while reducing the prediction accuracies of six traits by 0.04–0.09 and decreasing the prediction accuracy of one trait by 0.2. For the remaining six traits, the usage of the low-density SNP panel was associated with a slight increase in prediction accuracy. Our studies suggested that the low-density SNP panel (~30 K) is a feasible and promising tool for cost-effective genomic prediction in Chinese Simmental beef cattle, which may provide breeding organizations with a cheaper option and greater returns on investment.

Abstract

Chinese Simmental beef cattle play a key role in the Chinese beef industry due to their great adaptability and marketability. To achieve efficient genetic gain at a low breeding cost, it is crucial to develop a customized cost-effective low-density SNP panel for this cattle population. Thirteen growth, carcass, and meat quality traits and a BovineHD Beadchip genotyping of 1346 individuals were used to select trait-associated variants and variants contributing to great genetic variance. In addition, highly informative SNPs with high MAF in each 500 kb sliding window and in each genic region were also included separately. A low-density SNP panel consisting of 30,684 SNPs was developed, with an imputation accuracy of 97.4% when imputed to the 770 K level. Among 13 traits, the average prediction accuracy levels evaluated by genomic best linear unbiased prediction (GBLUP) and BayesA/B/Cπ were 0.22–0.47 and 0.18–0.60 for the ~30 K array and BovineHD Beadchip, respectively. Generally, the predictive performance of the ~30 K array was trait-dependent, with reduced prediction accuracies for seven traits. While differences in terms of prediction accuracy were observed among the 13 traits, the low-density SNP panel achieved moderate to high accuracies for most of the traits and even improved the accuracies for some traits.

Association of GHR Polymorphisms with Milk Production in Buffaloes

Simple Summary

The present study reported two missense mutations in the buffalo GHR gene: A novel (c.380G>A) and (c.836T>A) which was described in previous studies. These two single nucleotide polymorphisms (SNPs) were found to be associated with milk yield, fat %, protein %, and 305 day-milk, fat and protein yield, with higher performance for AA haplotype animals. Therefore, selection of buffaloes with AA haplotype would more likely improve milk production traits. Consequently, this would allow breeders to take more precise selection decisions, leading to significantly higher productivity and profitability within the Egyptian buffalo herds.

Abstract

For its role in the mediation of growth hormone (GH) galactopoietic effect, growth hormone receptor (GHR) was considered a functional candidate gene for milk performance in cattle. However, its genetic variation and potential effect have not been investigated in Egyptian buffaloes. This study aimed to screen GHR for polymorphisms and study their associations with milk traits in Egyptian buffaloes. Polymerase chain reaction, single-strand conformation polymorphism, and sequencing were used to identify mutations in 4 exons (E4–E6 and E8) of the GHR gene in 400 Egyptian buffaloes. No polymorphisms were found in E4, while 2 SNPs (c.380G>A/p.Arg127Lys and c.387C>T/p.Gly129) in E5, one silent mutation (c.435A>G/p.Pro145) in E6, and another missense mutation (c.836T>A/p.Phe279Tyr) in E8 were detected. The c.380G>A SNP in the extracellular domain was associated with milk yield, fat %, protein %, and 305-day milk, fat and protein yield, with higher levels in animals carrying the mutant A allele. The c.836T>A SNP in the transmembrane domain was associated with milk yield, fat %, protein %, and 305-day milk, fat and protein yield, with higher milk yield and lower fat %, protein %, fat and protein yield in the mutant A allele-animals. Interestingly, animals with the two mutant AA alleles produced higher milk yield, fat %, protein %, fat and protein yield, accompanied with upregulated expressions of GHR, GH, insulin-like growth factor 1 (IGF1), prolactin (PRL), prolactin receptor (PRLR), β-casein (encoded by CSN2 gene), and diacylglycerol acyltransferase-1 (DGAT1) genes and proteins in milk somatic cells. Therefore, selection of Egyptian buffaloes with mutant AA haplotypes for the novel c.380G>A SNP and the well-known c.836T>A SNP could improve milk yield and quality in buffaloes.

Incorporating Genome Annotation Into Genomic Prediction for Carcass Traits in Chinese Simmental Beef Cattle

Various methods have been proposed for genomic prediction (GP) in livestock. These methods have mainly focused on statistical considerations and did not include genome annotation information. In this study, to improve the predictive performance of carcass traits in Chinese Simmental beef cattle, we incorporated the genome annotation information into GP. Single nucleotide polymorphisms (SNPs) were annotated to five genomic classes: intergenic, gene, exon, protein coding sequences, and 3'/5' untranslated region. Haploblocks were constructed for all markers and these five genomic classes by defining a biologically functional unit, and haplotype effects were modeled in both numerical dosage and categorical coding strategies. The first-order epistatic effects among SNPs and haplotypes were modeled using a categorical epistasis model. For all makers, the extension from the SNP-based model to a haplotype-based model improved the accuracy by 5.4-9.8% for carcass weight (CW), live weight (LW), and striploin (SI). For the five genomic classes using the haplotype-based prediction model, the incorporation of gene class information into the model improved the accuracies by an average of 1.4, 2.1, and 1.3% for CW, LW, and SI, respectively, compared with their corresponding results for all markers. Including the first-order epistatic effects into the prediction models improved the accuracies in some traits and genomic classes. Therefore, for traits with moderate-to-high heritability, incorporating genome annotation information of gene class into haplotype-based prediction models could be considered as a promising tool for GP in Chinese Simmental beef cattle, and modeling epistasis in prediction can further increase the accuracy to some degree.

Targeted genotyping to identify potential functional variants associated with cholesterol content in bovine milk

High blood cholesterol concentration, mainly caused by high dietary cholesterol, is a potential risk factor for human health. Dairy products are important sources of human dietary cholesterol intake. Therefore, monitoring bovine milk cholesterol concentration is important for human health benefit. Genetic selection for improvement of cow milk cholesterol content requires understanding of the genetics of milk cholesterol. For this purpose, we performed analyses of additive and dominance effects of 126 potentially functional SNPs within 43 candidate genes with milk cholesterol content [expressed as mg of cholesterol in 100 g of fat (CHL_fat) or in 100 mg of milk (CHL_milk)]. The additive and dominance effects of SNPs rs380643365 in AGPAT1 (P = 0.04) and rs134357240 in SOAT1 (P = 0.035) genes associated significantly with CHL_fat. Moreover, five (rs109326954 and rs523413537 in DGAT1, rs109376747 in LDLR, rs42781651 in FAM198B and rs109967779 in ACAT2) and four (rs137347384 in RBM19, rs109376747 in LDLR, rs42016945 in PPARG and rs110862179 in SCAP) SNPs were significantly associated with CHL_milk (P < 0.05) based on additive and dominance effect analyses respectively. Rs109326954 and rs523413537 in DGAT1 explained a considerable portion of the phenotypic variance of CHL_milk (7.54 and 6.84% respectively), and might be useful in selection programs for reduced milk cholesterol content. Several significantly associated SNPs were in genes (such as ACAT2 and LDLR) involved in cholesterol metabolism in the liver or cholesterol transport, suggesting multiple mechanisms regulating milk cholesterol content. Nine and seven SNPs identified by additive or dominance effect analyses associated significantly with milk yield and fat yield respectively. Further analyses are required to better understand the consequences of these variants and their potential use in genomic selection of the studied traits.

A targeted genotyping approach to enhance the identification of variants for lactation persistency in dairy cows

Lactation persistency (LP), defined as the ability of a cow to maintain milk production at a high level after milk peak, is an important phenotype for the dairy industry. In this study, we used a targeted genotyping approach to scan for potentially functional single nucleotide polymorphisms (SNPs) within 57 potential candidate genes derived from our previous genome wide association study on LP and from the literature. A total of 175,490 SNPs were annotated within 10-kb flanking regions of the selected candidate genes. After applying several filtering steps, a total of 105 SNPs were retained for genotyping using target genotyping arrays. SNP association analyses were performed in 1,231 Holstein cows with 69 polymorphic SNPs using the univariate liner mixed model with polygenic effects using DMU package. Six SNPs including rs43770847, rs208794152, and rs208332214 in ADRM1; rs209443540 in C5orf34; rs378943586 in DDX11; and rs385640152 in GHR were suggestively significantly associated with LP based on additive effects and associations with 4 of them (rs43770847, rs208794152, rs208332214, and rs209443540) were based on dominance effects at P < 0.05. However, none of the associations remained significant at false discovery rate adjusted P (FDR) < 0.05. The additive variances explained by each suggestively significantly associated SNP ranged from 0.15% (rs43770847 in ADRM1) to 5.69% (rs209443540 in C5orf34), suggesting that these SNPs might be used in genetic selection for enhanced LP. The percentage of phenotypic variance explained by dominance effect ranged from 0.24% to 1.35% which suggests that genetic selection for enhanced LP might be more efficient by inclusion of dominance effects. Overall, this study identified several potentially functional variants that might be useful for selection programs for higher LP. Finally, a combination of identification of potentially functional variants followed by targeted genotyping and association analysis is a cost-effective approach for increasing the power of genetic association studies.

A genome-wide association study for feed efficiency-related traits in a crossbred pig population

Feed efficiency (FE) is one of the most important traits in pig production. However, it is difficult and costly to measure it, limiting the collection of large amount of data for an accurate selection for better FE. Therefore, the identification of single-nucleotide polymorphisms (SNPs) associated with FE-related traits to be used in the genetic evaluation is of great interest of pig breeding programs for increasing the prediction accuracy and the genetic progress of these traits. The objective of this study was to identify SNPs significantly associated with FE-related traits: average daily gain (ADG), average daily feed intake (ADFI) and feed conversion ratio (FCR). We also aimed to identify potential candidate genes for these traits. Phenotypic information recorded on a population of 2386 three-way crossbreed pigs that were genotyped for 51 468 SNPs was used. We identified three loci of quantitative trait (QTL) regions associated with ADG and three QTL regions associated with ADFI; however, no significant association was found for FCR. A false discovery rate (FDR) ≤ 0.005 was used as the threshold for declaring an association as significant. The QTL regions associated with ADG on Sus scrofa chromosome (SSC) 1 were located between 177.01 and 185.47 Mb, which overlaps with the QTL regions for ADFI on SSC1 (173.26 and 185.47 Mb). The other QTL region for ADG was located on SSC12 (2.87 and 3.22 Mb). The most significant SNPs in these QTL regions explained up to 3.26% of the phenotypic variance of these traits. The non-identification of genomic regions associated with FCR can be explained by the complexity of this trait, which is a ratio between ADG and ADFI. Finally, the genes CDH19, CDH7, RNF152, MC4R, PMAIP1, FEM1B and GAA were the candidate genes found in the 1 Mb window around the QTL regions identified in this study. Among them, the MC4R gene (SSC1) has a well-known function related to ADG and ADFI. In this study, we identified three QTL regions for ADG (SSC1 and SSC12) and three for ADFI (SSC1). These regions were previously described in purebred pig populations; however, to our knowledge, this is the first study to confirm the relevance of these QTL regions in a crossbred pig population. The potential use of the SNPs and genes identified in this study in prediction models that combine genomic selection and marker-assisted selection should be evaluated for increasing the prediction accuracy of these traits in this population.

Genomic Prediction Including SNP-Specific Variance Predictors

The increasing amount of available biological information on the markers can be used to inform the models applied for genomic selection to improve predictions. The objective of this study was to propose a general model for genomic selection using a link function approach within the hierarchical generalized linear model framework (hglm) that can include external information on the markers. These models can be fitted using the well-established hglm package in R. We also present an R package (CodataGS) to fit these models, which is significantly faster than the hglm package. Simulated data were used to validate the proposed model. We tested categorical, continuous and combination models where the external information on the markers was related to 1) the location of the QTL on the genome with varying degree of uncertainty, 2) the relationship of the markers with the QTL calculated as the LD between them, and 3) a combination of both. The proposed models showed improved accuracies from 3.8% up to 23.2% compared to the SNP-BLUP method in a simulated population derived from a base population with 100 individuals. Moreover, the proposed categorical model was tested on a dairy cattle dataset for two traits (Milk Yield and Fat Percentage). These results also showed improved accuracy compared to SNP-BLUP, especially for the Fat% trait. The performance of the proposed models depended on the genetic architecture of the trait, as traits that deviate from the infinitesimal model benefited more from the external information. Also, the gain in accuracy depended on the degree of uncertainty of the external information provided to the model. The usefulness of these type of models is expected to increase with time as more accurate information on the markers becomes available.

Integrating genome-wide co-association and gene expression to identify putative regulators and predictors of feed efficiency in pigs

BACKGROUND

Feed efficiency (FE) has a major impact on the economic sustainability of pig production. We used a systems-based approach that integrates single nucleotide polymorphism (SNP) co-association and gene-expression data to identify candidate genes, biological pathways, and potential predictors of FE in a Duroc pig population.

RESULTS

We applied an association weight matrix (AWM) approach to analyse the results from genome-wide association studies (GWAS) for nine FE associated and production traits using 31K SNPs by defining residual feed intake (RFI) as the target phenotype. The resulting co-association network was formed by 829 SNPs. Additive effects of this SNP panel explained 61% of the phenotypic variance of RFI, and the resulting phenotype prediction accuracy estimated by cross-validation was 0.65 (vs. 0.20 using pedigree-based best linear unbiased prediction and 0.12 using the 31K SNPs). Sixty-eight transcription factor (TF) genes were identified in the co-association network; based on the lossless approach, the putative main regulators were COPS5, GTF2H5, RUNX1, HDAC4, ESR1, USP16, SMARCA2 and GTF2F2. Furthermore, gene expression data of the gluteus medius muscle was explored through differential expression and multivariate analyses. A list of candidate genes showing functional and/or structural associations with FE was elaborated based on results from both AWM and gene expression analyses, and included the aforementioned TF genes and other ones that have key roles in metabolism, e.g. ESRRG, RXRG, PPARGC1A, TCF7L2, LHX4, MAML2, NFATC3, NFKBIZ, TCEA1, CDCA7L, LZTFL1 or CBFB. The most enriched biological pathways in this list were associated with behaviour, immunity, nervous system, and neurotransmitters, including melatonin, glutamate receptor, and gustation pathways. Finally, an expression GWAS allowed identifying 269 SNPs associated with the candidate genes' expression (eSNPs). Addition of these eSNPs to the AWM panel of 829 SNPs did not improve the accuracy of genomic predictions.

CONCLUSIONS

Candidate genes that have a direct or indirect effect on FE-related traits belong to various biological processes that are mainly related to immunity, behaviour, energy metabolism, and the nervous system. The pituitary gland, hypothalamus and thyroid axis, and estrogen signalling play fundamental roles in the regulation of FE in pigs. The 829 selected SNPs explained 61% of the phenotypic variance of RFI, which constitutes a promising perspective for applying genetic selection on FE relying on molecular-based prediction.

Analyses of histological and transcriptome differences in the skin of short-hair and long-hair rabbits

BACKGROUND

Hair fibre length is an important economic trait of rabbits in fur production. However, molecular mechanisms regulating rabbit hair growth have remained elusive.

RESULTS

Here we aimed to characterise the skin traits and gene expression profiles of short-hair and long-hair rabbits by histological and transcriptome analyses. Haematoxylin-eosin staining was performed to observe the histological structure of the skin of short-hair and long-hair rabbits. Compared to that in short-hair rabbits, a significantly longer anagen phase was observed in long-hair rabbits. In addition, by RNA sequencing, we identified 951 genes that were expressed at significantly different levels in the skin of short-hair and long-hair rabbits. Nine significantly differentially expressed genes were validated by quantitative real-time polymerase chain reaction. A gene ontology analysis revealed that epidermis development, hair follicle development, and lipid metabolic process were significantly enriched. Further, we identified potential functional genes regulating follicle development, lipid metabolic, and apoptosis as well as important pathways including extracellular matrix-receptor interaction and basal cell carcinoma pathway.

CONCLUSIONS

The present study provides transcriptome evidence for the differences in hair growth between short-hair and long-hair rabbits and reveals that lipid metabolism and apoptosis might constitute major factors contributing to hair length.

Genomic prediction of bull fertility in US Jersey dairy cattle

Service sire has a major effect on reproductive success in dairy cattle. Recent studies have reported accurate predictions for Holstein bull fertility using genomic data. The objective of this study was to assess the feasibility of genomic prediction of sire conception rate (SCR) in US Jersey cattle using alternative predictive models. Data set consisted of 1.5k Jersey bulls with SCR records and 95k SNP covering the entire genome. The analyses included the use of linear and Gaussian kernel-based models fitting either all the SNP or subsets of markers with presumed functional roles, such as SNP significantly associated with SCR or SNP located within or close to annotated genes. Model predictive ability was evaluated using 5-fold cross-validation with 10 replicates. The entire SNP set exhibited predictive correlations around 0.30. Interestingly, either SNP marginally associated with SCR or genic SNP achieved higher predictive abilities than their counterparts using random sets of SNP. Among alternative SNP subsets, Gaussian kernel models fitting significant SNP achieved the best performance with increases in predictive correlation up to 7% compared with the standard whole-genome approach. Notably, the use of a multi-breed reference population including the entire US Holstein SCR data set (11.5k bulls) allowed us to achieve predictive correlations up to 0.315, gaining 8% in accuracy compared with the standard model fitting a pure Jersey reference set. Overall, our findings indicate that genomic prediction of Jersey bull fertility is feasible. The use of Gaussian kernels fitting markers with relevant roles and the inclusion of Holstein records in the training set seem to be promising alternatives to the standard whole-genome approach. These results have the potential to help the dairy industry improve US Jersey sire fertility through accurate genome-guided decisions.

Impact of rare and low-frequency sequence variants on reliability of genomic prediction in dairy cattle

Background

Availability of whole-genome sequence data for a large number of cattle and efficient imputation methodologies open a new opportunity to include rare and low-frequency variants (RLFV) in genomic prediction in dairy cattle. The objective of this study was to examine the impact of including RLFV that are within genes and selected from whole-genome sequence variants, on the reliability of genomic prediction for fertility, health and longevity in dairy cattle.

Results

All genic RLFV with a minor allele frequency lower than 0.05 were extracted from imputed sequence data and subsets were created using different strategies. These subsets were subsequently combined with Illumina 50 k single nucleotide polymorphism (SNP) data and used for genomic prediction. Reliability of prediction obtained by using 50 k SNP data alone was used as reference value and absolute changes in reliabilities are referred to as changes in percentage points. Adding a component that included either all the genic or a subset of selected RLFV into the model in addition to the 50 k component changed the reliability of predictions by − 2.2 to 1.1%, i.e. hardly no change in reliability of prediction was found, regardless of how the RLFV were selected. In addition to these empirical analyses, a simulation study was performed to evaluate the potential impact of adding RLFV in the model on the reliability of prediction. Three sets of causal RLFV (containing 21,468, 1348 and 235 RLFV) that were randomly selected from different numbers of genes were generated and accounted for 10% additional genetic variance of the estimated variance explained by the 50 k SNPs. When genic RLFV based on mapping results were included in the prediction model, reliabilities improved by up to 4.0% and when the causal RLFV were included they improved by up to 6.8%.

Conclusions

Using selected RLFV from whole-genome sequence data had only a small impact on the empirical reliability of genomic prediction in dairy cattle. Our simulations revealed that for sequence data to bring a benefit, the key is to identify causal RLFV.

Electronic supplementary material

The online version of this article (10.1186/s12711-018-0432-8) contains supplementary material, which is available to authorized users.

Genomic Prediction of Complex Phenotypes Using Genic Similarity Based Relatedness Matrix

In the last years, a series of methods for genomic prediction (GP) have been established, and the advantages of GP over pedigree best linear unbiased prediction (BLUP) have been reported. However, the majority of previously proposed GP models are purely based on mathematical considerations while seldom take the abundant biological knowledge into account. Prediction ability of those models largely depends on the consistency between the statistical assumptions and the underlying genetic architectures of traits of interest. In this study, gene annotation information was incorporated into GP models by constructing haplotypes with SNPs mapped to genic regions. Haplotype allele similarity between pairs of individuals was measured through different approaches at single gene level and then converted into whole genome level, which was then treated as a special kernel and used in kernel based GP models. Results shown that the gene annotation guided methods gave higher or at least comparable predictive ability in some traits, especially in the Arabidopsis dataset and the rice breeding population. Compared to SNP models and haplotype models without gene annotation, the gene annotation based models improved the predictive ability by 0.56~26.67% in the Arabidopsis and 1.62~16.53% in the rice breeding population, respectively. However, incorporating gene annotation slightly improved the predictive ability for several traits but did not show any extra gain for the rest traits in a chicken population. In conclusion, integrating gene annotation into GP models could be beneficial for some traits, species, and populations compared to SNP models and haplotype models without gene annotation. However, more studies are yet to be conducted to implicitly investigate the characteristics of these gene annotation guided models.

Functional Partitioning of Genomic Variance and Genome-Wide Association Study for Carcass Traits in Korean Hanwoo Cattle Using Imputed Sequence Level SNP Data

Quantitative traits are usually controlled by numerous genomic variants with small individual effects, and variances associated with those traits are explained in a continuous manner. However, the relative contributions of genomic regions to observed genetic variations have not been well explored using sequence level single nucleotide polymorphism (SNP) information. Here, imputed sequence level SNP data (11,278,153 SNPs) of 2109 Hanwoo steers (Korean native cattle) were partitioned according to functional annotation, chromosome, and minor allele frequency (MAF). Genomic relationship matrices (GRMs) were constructed for each classified region and fitted in the model both separately and together for carcass weight (CWT), eye muscle area (EMA), backfat thickness (BFT), and marbling score (MS) traits. A genome-wide association study (GWAS) was performed to identify significantly associated variants in genic and exon regions using a linear mixed model, and the genetic contribution of each exonic SNP was determined using a Bayesian mixture model. Considering all SNPs together, the heritability estimates for CWT, EMA, BFT, and MS were 0.57 ± 0.05, 0.46 ± 0.05, 0.45 ± 0.05, and 0.49 ± 0.05, respectively, which reflected substantial genomic contributions. Joint analysis revealed that the variance explained by each chromosome was proportional to its physical length with weak linear relationships for all traits. Moreover, genomic variances explained by functional category and MAF class differed greatly among the traits studied in joint analysis. For example, exon regions had larger contributions for BFT (0.13 ± 0.08) and MS (0.22 ± 0.08), whereas intron and intergenic regions explained most of the total genomic variances for CWT and EMA (0.22 ± 0.09–0.32 ± 0.11). Considering different functional classes of exon regions and the per SNP contribution revealed the largest proportion of genetic variance was attributable to synonymous variants. GWAS detected 206 and 27 SNPs in genic and exon regions, respectively, on BTA4, BTA6, and BTA14 that were significantly associated with CWT and EMA. These SNPs were harbored by 31 candidate genes, among which TOX, FAM184B, PPARGC1A, PRKDC, LCORL, and COL1A2 were noteworthy. BayesR analysis found that most SNPs (>93%) had very small effects and the 4.02–6.92% that had larger effects (10^-4 × σA2, 10^-3 × σA2, and 10^-2 × σA2) explained most of the total genetic variance, confirming polygenic components of the traits studied.

Feed-efficient pigs exhibit molecular patterns allowing a timely circulation of hormones and nutrients

Feed efficiency (FE) is a measure of the rate between feed intake and body weight gain and is subject to constant progress in pigs, based on extensive performance tests and analyses of physiological parameters. However, endocrine regulatory circuits that comprise the sensation and perception of intrinsic requirements and appropriate systemic responses have not yet been fully elucidated. It is hypothesized that the gut-brain axis, which is a network of hierarchical anterior regulatory tissues, contributes largely to variations in FE. Therefore, full-sib pigs with extreme residual feed intake values were assigned to experimental groups of high and low FE. Relevant hormones, minerals, and metabolites including fatty acid profiles were analyzed in serum to assess postprandial conditions. Transcriptome profiles were deduced from intestinal (duodenum, jejunum, ileum) and neuroendocrine tissues (hypothalamus). Serum analyses of feed-efficient animals showed an increased content of the incretin GIP, calcium, magnesium, β-hydroxybutyric acid, and fat compared with low-FE pigs. Complementary expression profiles in intestinal tissues indicate a modulated permeability and host-microbe interaction in FE-divergent pigs. Transcriptomic analyses of the hypothalamus showed that differences between the FE groups in appetite and satiety regulation are less pronounced. However, hypothalamic abundance of transcripts like ADCY7, LHCGR, and SLC2A7 and molecular signatures in local and systemic tissue sites indicate that increased allocation and circulation of energy equivalents, minerals, and hormones are promoted in feed-efficient animals. Overall, patterns of gastrointestinal hormones and gene expression profiles identified host-microbiota interaction, intestinal permeability, feed intake regulation, and energy expenditure as potential mechanisms affecting FE in pigs.

Genome-wide association studies to identify quantitative trait loci affecting milk production traits in water buffalo

Water buffalo is the second largest resource of milk supply around the world, and it is well known for its distinctive milk quality in terms of fat, protein, lactose, vitamin, and mineral contents. Understanding the genetic architecture of milk production traits is important for future improvement by the buffalo breeding industry. The advance of genome-wide association studies (GWAS) provides an opportunity to identify potential genetic variants affecting important economical traits. In the present study, GWAS was performed for 489 buffaloes with 1,424 lactation records using the 90K Affymetrix Buffalo SNP Array (Affymetrix/Thermo Fisher Scientific, Santa Clara, CA). Collectively, 4 candidate single nucleotide polymorphisms (SNP) in 2 genomic regions were found to associate with buffalo milk production traits. One region affecting milk fat and protein percentage was located on the equivalent of Bos taurus autosome (BTA)3, spanning 43.3 to 43.8 Mb, which harbored the most likely candidate genes MFSD14A, SLC35A3, and PALMD. The other region on the equivalent of BTA14 at 66.5 to 67.0 Mb contained candidate genes RGS22 and VPS13B and influenced buffalo total milk yield, fat yield, and protein yield. Interestingly, both of the regions were reported to have quantitative trait loci affecting milk performance in dairy cattle. Furthermore, we suggest that buffaloes with the C allele at AX-85148558 and AX-85073877 loci and the G allele at AX-85106096 locus can be selected to improve milk fat yield in this buffalo-breeding program. Meanwhile, the G allele at AX-85063131 locus can be used as the favorable allele for improving milk protein percentage. Genomic prediction showed that the reliability of genomic estimated breeding values (GEBV) of 6 milk production traits ranged from 0.06 to 0.22, and the correlation between estimated breeding values and GEBV ranged from 0.23 to 0.35. These findings provide useful information to understand the genetic basis of buffalo milk properties and may play a role in accelerating buffalo breeding programs using genomic approaches.

Incorporating Gene Annotation into Genomic Prediction of Complex Phenotypes

Today, genomic prediction (GP) is an established technology in plant and animal breeding programs. Current standard methods are purely based on statistical considerations but do not make use of the abundant biological knowledge, which is easily available from public databases. Major questions that have to be answered before biological prior information can be used routinely in GP approaches are which types of information can be used, and at which points they can be incorporated into prediction methods. In this study, we propose a novel strategy to incorporate gene annotation into GP of complex phenotypes by defining haploblocks according to gene positions. Haplotype effects are then modeled as categorical or as numerical allele dosage variables. The underlying concept of this approach is to build the statistical model on variables representing the biologically functional units. We evaluate the new methods with data from a heterogeneous stock mouse population, the Drosophila Genetic Reference Panel (DGRP), and a rice breeding population from the Rice Diversity Panel. Our results show that using gene annotation to define haploblocks often leads to a comparable, but for some traits to a higher, predictive ability compared to SNP-based models or to haplotype models that do not use gene annotation information. Modeling gene interaction effects can further improve predictive ability. We also illustrate that the additional use of markers that have not been mapped to any gene in a second separate relatedness matrix does in many cases not lead to a relevant additional increase in predictive ability when the first matrix is based on haploblocks defined with gene annotation data, suggesting that intergenic markers only provide redundant information on the considered data sets. Therefore, gene annotation information seems to be appropriate to perceive the importance of DNA segments. Finally, we discuss the effects of gene annotation quality, marker density, and linkage disequilibrium on the performance of the new methods. To our knowledge, this is the first work that incorporates epistatic interaction or gene annotation into haplotype-based prediction approaches.

Gaussian covariance graph models accounting for correlated marker effects in genome-wide prediction

Several statistical models used in genome-wide prediction assume uncorrelated marker allele substitution effects, but it is known that these effects may be correlated. In statistics, graphical models have been identified as a useful tool for covariance estimation in high-dimensional problems and it is an area that has recently experienced a great expansion. In Gaussian covariance graph models (GCovGM), the joint distribution of a set of random variables is assumed to be Gaussian and the pattern of zeros of the covariance matrix is encoded in terms of an undirected graph G. In this study, methods adapting the theory of GCovGM to genome-wide prediction were developed (Bayes GCov, Bayes GCov-KR and Bayes GCov-H). In simulated data sets, improvements in correlation between phenotypes and predicted breeding values and accuracies of predicted breeding values were found. Our models account for correlation of marker effects and permit to accommodate general structures as opposed to models proposed in previous studies, which consider spatial correlation only. In addition, they allow incorporation of biological information in the prediction process through its use when constructing graph G, and their extension to the multi-allelic loci case is straightforward.

Whole-genome sequence-based genomic prediction in laying chickens with different genomic relationship matrices to account for genetic architecture

Background

With the availability of next-generation sequencing technologies, genomic prediction based on whole-genome sequencing (WGS) data is now feasible in animal breeding schemes and was expected to lead to higher predictive ability, since such data may contain all genomic variants including causal mutations. Our objective was to compare prediction ability with high-density (HD) array data and WGS data in a commercial brown layer line with genomic best linear unbiased prediction (GBLUP) models using various approaches to weight single nucleotide polymorphisms (SNPs).

Methods

A total of 892 chickens from a commercial brown layer line were genotyped with 336 K segregating SNPs (array data) that included 157 K genic SNPs (i.e. SNPs in or around a gene). For these individuals, genome-wide sequence information was imputed based on data from re-sequencing runs of 25 individuals, leading to 5.2 million (M) imputed SNPs (WGS data), including 2.6 M genic SNPs. De-regressed proofs (DRP) for eggshell strength, feed intake and laying rate were used as quasi-phenotypic data in genomic prediction analyses. Four weighting factors for building a trait-specific genomic relationship matrix were investigated: identical weights, −(log₁₀P) from genome-wide association study results, squares of SNP effects from random regression BLUP, and variable selection based weights (known as BLUP|GA). Predictive ability was measured as the correlation between DRP and direct genomic breeding values in five replications of a fivefold cross-validation.

Results

Averaged over the three traits, the highest predictive ability (0.366 ± 0.075) was obtained when only genic SNPs from WGS data were used. Predictive abilities with genic SNPs and all SNPs from HD array data were 0.361 ± 0.072 and 0.353 ± 0.074, respectively. Prediction with −(log₁₀P) or squares of SNP effects as weighting factors for building a genomic relationship matrix or BLUP|GA did not increase accuracy, compared to that with identical weights, regardless of the SNP set used.

Conclusions

Our results show that little or no benefit was gained when using all imputed WGS data to perform genomic prediction compared to using HD array data regardless of the weighting factors tested. However, using only genic SNPs from WGS data had a positive effect on prediction ability.

Electronic supplementary material

The online version of this article (doi:10.1186/s12711-016-0277-y) contains supplementary material, which is available to authorized users.

Multi-omic data integration and analysis using systems genomics approaches: methods and applications in animal production, health and welfare

In the past years, there has been a remarkable development of high-throughput omics (HTO) technologies such as genomics, epigenomics, transcriptomics, proteomics and metabolomics across all facets of biology. This has spearheaded the progress of the systems biology era, including applications on animal production and health traits. However, notwithstanding these new HTO technologies, there remains an emerging challenge in data analysis. On the one hand, different HTO technologies judged on their own merit are appropriate for the identification of disease-causing genes, biomarkers for prevention and drug targets for the treatment of diseases and for individualized genomic predictions of performance or disease risks. On the other hand, integration of multi-omic data and joint modelling and analyses are very powerful and accurate to understand the systems biology of healthy and sustainable production of animals. We present an overview of current and emerging HTO technologies each with a focus on their applications in animal and veterinary sciences before introducing an integrative systems genomics framework for analysing and integrating multi-omic data towards improved animal production, health and welfare. We conclude that there are big challenges in multi-omic data integration, modelling and systems-level analyses, particularly with the fast emerging HTO technologies. We highlight existing and emerging systems genomics approaches and discuss how they contribute to our understanding of the biology of complex traits or diseases and holistic improvement of production performance, disease resistance and welfare.

Differential contribution of genomic regions to marked genetic variation and prediction of quantitative traits in broiler chickens

Background

Genome-wide association studies in humans have found enrichment of trait-associated single nucleotide polymorphisms (SNPs) in coding regions of the genome and depletion of these in intergenic regions. However, a recent release of the ENCyclopedia of DNA elements showed that ~80 % of the human genome has a biochemical function. Similar studies on the chicken genome are lacking, thus assessing the relative contribution of its genic and non-genic regions to variation is relevant for biological studies and genetic improvement of chicken populations.

Methods

A dataset including 1351 birds that were genotyped with the 600K Affymetrix platform was used. We partitioned SNPs according to genome annotation data into six classes to characterize the relative contribution of genic and non-genic regions to genetic variation as well as their predictive power using all available quality-filtered SNPs. Target traits were body weight, ultrasound measurement of breast muscle and hen house egg production in broiler chickens. Six genomic regions were considered: intergenic regions, introns, missense, synonymous, 5′ and 3′ untranslated regions, and regions that are located 5 kb upstream and downstream of coding genes. Genomic relationship matrices were constructed for each genomic region and fitted in the models, separately or simultaneously. Kernel-based ridge regression was used to estimate variance components and assess predictive ability. Contribution of each class of genomic regions to dominance variance was also considered.

Results

Variance component estimates indicated that all genomic regions contributed to marked additive genetic variation and that the class of synonymous regions tended to have the greatest contribution. The marked dominance genetic variation explained by each class of genomic regions was similar and negligible (~0.05). In terms of prediction mean-square error, the whole-genome approach showed the best predictive ability.

Conclusions

All genic and non-genic regions contributed to phenotypic variation for the three traits studied. Overall, the contribution of additive genetic variance to the total genetic variance was much greater than that of dominance variance. Our results show that all genomic regions are important for the prediction of the targeted traits, and the whole-genome approach was reaffirmed as the best tool for genome-enabled prediction of quantitative traits.