DIAGNOdent measurements of cultures of selected oral bacteria and demineralized enamel

An in vitro assessment of the residual dentin after using three minimally invasive caries removal techniques

To evaluate the efficiency and effectiveness of three minimally invasive (MI) techniques in removing deep dentin carious lesions. Forty extracted carious molars were treated by conventional rotary excavation (control), chemomechanical caries removal agent (Brix 3000), ultrasonic abrasion (WOODPECKER, GUILIN, China); and Er, Cr: YSGG laser ablation (BIOLASE San Clemente, CA, USA). The assessments include; the excavation time, DIAGNOdent pen, Raman spectroscopy, Vickers microhardness, and scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM-EDX). The rotary method recorded the shortest excavation time (p < 0.001), Brix 3000 gel was the slowest. DIAGNOdent pen values ranged between 14 and 18 in the remaining dentin and laser-ablated surfaces recorded the lowest reading (p < 0.001). The Ca:P ratios of the remaining dentin were close to sound dentin after all excavation methods; however, it was higher in the ultrasonic technique (p < 0.05). The bur-excavated dentin showed higher phosphate and lower matrix contents with higher tissue hardness that was comparable to sound dentin indicating the non-selectiveness of this technique in removing the potentially repairable dentin tissue. In contrast, the MI techniques exhibited lower phosphate and higher organic contents associated with lower microhardness in the deeper dentin layers. This was associated with smooth residual dentin without smearing and patent dentinal tubules. This study supports the efficiency of using MI methods in caries removal as conservative alternatives to rotary excavation, providing a promising strategy for the clinical dental practice.

The in-vitro development of novel enzyme-based chemo-mechanical caries removal agents

OBJECTIVES

Bromelain is a potent proteolytic enzyme that has a unique functionality makes it valuable for various therapeutic purposes. This study aimed to develop three novel formulations based on bromelain to be used as chemomechanical caries removal agents.

METHODS

The novel agents were prepared using different concentrations of bromelain (10-40 wt. %), with and without 0.1-0.3 wt. % chloramine T or 0.5-1.5 wt. % chlorhexidine (CHX). Based on the enzymatic activity test, three formulations were selected; 30 % bromelain (F1), 30 % bromelain-0.1 % chloramine (F2) and 30 % bromelain-1.5 % CHX (F3). The assessments included molecular docking, Fourier-transform infrared spectroscopy (FTIR), viscosity and pH measurements. The efficiency of caries removal was assessed by DIAGNOdent pen, measuring the excavation time and number of applications, followed by a morphological evaluation of the remaining dentine using scanning electron microscopy (SEM). The results were compared to Brix 3000 as a control.

RESULTS

The chloramine and chlorhexidine were chemically compatible with bromelain without compromising the enzyme activity. All experimental formulations showed higher viscosity and pH in comparison to Brix 3000. The DIAGNOdent readings were <20 in all groups, and the lowest readings were observed in F2. The excavation time and number of applications were lowest in F2 and F1. Both F2 and F3 produced smooth dentine surfaces with less tissue debris, but more patent dentine tubules were observed in F1 and F2.

CONCLUSIONS

The bromelain-contained formulations showed a potential to be used as chemomechanical caries removal agents in vitro. Further laboratory and clinical studies are needed to validate this claim.

CLINICAL SIGNIFICANCE

The bromelain from pineapple stem has broad specificity for cleavage the peptide bonds in denatured protein to facilitate their removal. The study proved the efficiency of this enzyme to remove the dental caries chemomechanically when used alone or conjugated with chloramine and/or chlorhexidine to enhance the disinfecting and cleansing properties.

Fissure caries inhibition with a CO2 9.3-μm short-pulsed laser-a randomized, single-blind, split-mouth controlled, 1-year clinical trial

OBJECTIVES

The objective of this randomized, single-blind, split-mouth controlled, clinical trial was to evaluate whether the use of a short-pulsed 9.3-μm CO₂ laser increases the caries resistance of occlusal pit and fissures in addition to fluoride therapy over 12 months.

MATERIALS AND METHODS

A total of 60 participants, average age 13.1 years, were enrolled. At baseline, second molars were randomized into test and control, and assessed by ICDAS, SOPROLIFE, and DIAGNOdent. An independent investigator irradiated test molars with a CO₂ laser (wavelength 9.3 μm, pulse duration 4 μs, pulse repetition rate 43 Hz, beam diameter 250 μm, average fluence 3.9 J/cm², 20 laser pulses per spot). Test molars received laser and fluoride treatment, control teeth fluoride alone. Fluoride varnish was applied at baseline and at 6 months. After 6 and 12 months, teeth were again assessed.

RESULTS

A total of 57 participants completed the 6-month and 51 the 12-month recall. Laser-treated surfaces showed very slight ICDAS improvements over time with ICDAS change - 1 in 11% and 8%, no changes (ICDAS change 0) in 68% and 67%, and slightly worsened (ICDAS change 1) in 19% and 24% at 6- and 12-month recalls, respectively, and worsened by two scores in 2% at both recall time points. Control teeth showed significantly higher ICDAS increases, with 47% and 25% showing ICDAS change 0, ICDAS change 1 in 49% and 55%, and ICDAS change 2 in 4% and 20% at 6- and 12-month recalls, respectively. Differences in ICDAS changes between the groups were statistically significant (P = 0.0002 and P < 0.0001; Wilcoxon's signed-rank test, exact). A total of 22% of the participants developed ICDAS 3 scores on the control teeth.

CONCLUSIONS

Microsecond short-pulsed 9.3-μm CO₂ laser irradiation markedly inhibits caries progression in pits and fissures in comparison with fluoride varnish alone.

CLINICAL RELEVANCE

The 9.3-μm CO₂ laser irradiation of pits and fissures enhances caries resistance.

TRIAL REGISTRATION

ClinicalTrials.gov identifier: NCT02357979.

3D Dental Subsurface Imaging Using Enhanced Truncated Correlation-Photothermal Coherence Tomography

Development of accurate and sensitive dental imaging technologies is a top priority in the pursuit of high-quality dental care. However, while early dental caries detection and routine monitoring of treatment progress are crucial for effective long-term results, current radiographic technologies fall short of this objective due to low sensitivity for small lesions and use of ionizing radiation which is unsuitable for frequent monitoring. Here we demonstrate the first application of enhanced Truncated Correlation-Photothermal Coherence Tomography (eTC-PCT) to dental imaging. eTC-PCT is non-invasive and non-ionizing, operates well below the maximum permissible exposure (MPE) limit, and features 3D subsurface imaging capability with operator controlled axial resolution. We explore the potential of this method for dental applications and demonstrate its capability for depth-resolved tomographic 3D reconstructions of the details and subsurface extent of a variety of dental defects. To this end, in this proof-of-concept study, dental eTC-PCT imaging results, and its sensitivity to dental caries, are discussed in comparison with visual examination, x-rays and micro-CT imaging.

Difference assessment of composite resins and sound tooth applicable in the resin-imbedded tooth for resin repair using fluorescence, microhardness, DIAGNOdent, and X-ray image

OBJECTIVE

Visual differentiation of resin and tooth in a tooth cavity is not simple due to their highly similar shade. The purpose of the present study was to find any noninvasive method which can effectively differentiate resin from sound tooth in a resin-imbedded tooth for resin repair.

MATERIALS AND METHODS

For the study, various resin products were imbedded into the cavity of sound tooth. By applying laser of different wavelengths, autofluorescence (AF) of sound tooth and resin products were obtained. Microhardness, X-ray radiograph, and DIAGNOdent were tested for each tooth, resin product, and resin-imbedded tooth.

RESULTS

For the AF spectra obtained using the 405-nm wavelength, sound tooth has emission peak at 440-470 nm and near 490 nm. Sound tooth has several times higher microhardness than resin products regardless of position in tooth subsurface. Due to the difference of radiopaque fillers' composition and concentration, resin products have different brightness in the X-ray radiograph. DIAGNOdent readings for tooth and resin products were inconsistently different, and the difference of obtained values was slightly not to be applicable for the differentiation.

CONCLUSION

Among the tested methods, with noninvasive treatment, AF spectrum by the 405-nm wavelength showed the apparent difference between resin and tooth.

CLINICAL SIGNIFICANCE

For the resin repair in a resin-imbedded tooth cavity, AF spectrum produced by 405-nm wavelength could be a useful method in tracing the resin-tooth boundary if combined with conventional X-ray radiography.

Red fluorescence of dental biofilm as an indicator for assessing the efficacy of antimicrobials

The study aimed to determine whether the red fluorescence (RF) of a dental microcosm biofilm as measured with quantitative light-induced fluorescence (QLF) technology is useful for assessing the efficacy of antimicrobials. Dental microcosm biofilms were formed on bovine enamel discs and grown under 0.3% sucrose challenge and treated with chlorhexidine (CHX) solutions at different concentrations (0.05%, 0.1%, and 0.5%) plus a negative control [sterile distilled water (DW)] twice daily for 7 days. The biofilms were photographed using a QLF-digital system to evaluate the RF by calculating the red/green ratio, and pH values of the medium were measured daily. After 7 days, the bacterial viability of the biofilm was assessed by measuring the counts of viable total bacteria and aciduric bacteria, and the percentage surface microhardness changes (%SHC) was evaluated. The RF and cariogenic properties were compared for the different concentrations of CHX, and their correlations were examined. The RF and its increase rate were much lower for CHX-treated biofilms than for DW-treated biofilms. The RF after 7 days of maturation decreased significantly with increasing CHX concentrations (p<0.001) and was from 31% (for 0.05% CHX) to 46% (for 0.5% CHX) lower than that of the DW group. Strong correlations were reported between the RF of the 7-day-maturation biofilms and cariogenic properties, such as the number of total bacteria (r=0.93), number of aciduric bacteria (r=0.97), supernatant pH (r=0.43), and %SHC (r=0.98). In conclusion, the RF of dental biofilms as measured with QLF technology can be used to nondestructively assess and monitor the effect of antimicrobials against biofilm.

Correlation with Caries Lesion Depth of The Canary System, DIAGNOdent and ICDAS II

Introduction:

The aim of this study was to correlate lesion depth of natural caries, measured with Polarized Light Microscopy (PLM), to Canary Numbers (CN) derived from The Canary System™ (CS), numerical readings from DIAGNOdent (DD), and lesion scores from ICDAS II.

Methods:

A total of 20 examination sites on extracted human molars and premolars were selected. The selected examination sites consisted of healthy and enamel caries on smooth and occlusal surfaces of each tooth. Two blinded dentists ranked each examination site using ICDAS II and the consensus score for each examined site was recorded. The same examination sites were scanned with CS and DD, and the CN and DD readings were recorded. After all the measurements were completed, the readings of the three caries detection methods were validated with a histological method, Polarized Light Microscopy (PLM). PLM performed by blinded examiners was used as the ‘gold standard’ to confirm the presence or absence of a caries lesion within each examined site and to determine caries lesion depth.

Results:

Pearson’s coefficients of correlation with caries lesion depth of CNs, DD readings and ICDAS scores were 0.84, 0.21 and 0.77, respectively. Mean ± SD CN for sound sites (n=3), caries lesion depths <800 µm (n=11), and caries lesion depths >800 µm (n=6) were 11±1, 55±15, and 75±22, respectively. Mean ± SD DD readings for sound sites, caries lesion depths <800 µm, and caries lesion depths >800 µm were 1±1, 7±11, and 8±9, respectively. Mean ± SD ICDAS II scores for sound sites, caries lesion depths <800 µm, and caries lesion depths >800 µm were 0±0, 2±1, and 2±1, respectively. The intra-operator repeatability for the Canary System was .953 (0.913, 0.978).

Conclusion:

This study demonstrated that the CS exhibits much higher correlation with caries lesion depth compared to ICDAS II and DD. CS may provide the clinician with more information about the size and position of the lesion which might help in monitoring or treating the lesion.

The present extracted tooth study found that The Canary System correlates with caries lesion depth more accurately that ICDAS II and DIAGNOdent.

Caries diagnosis using light fluorescence devices in comparison with traditional visual and tactile evaluation: a prospective study in 152 patients

The objective of the study was to evaluate the in vivo effectiveness of two fluorescence techniques (DIAGNOdent and VistaProof) and of visual and tactile evaluation in the diagnosis of occlusal caries in permanent teeth. A total of 302 teeth (molars and premolars) from 152 patients were studied. The occlusal surfaces were cleaned using pumice mixed with water, followed by application of the diagnostic methods according to the instructions of the manufacturer, and of the visual and tactile methods according to the recommendations. The true extent of the lesions was determined by fissurotomy. The sensitivity and specificity of visual diagnosis were 79 and 72 %, respectively, versus 53 and 98 % in the case of tactile diagnosis. Teeth with caries lesions exhibited significantly higher DIAGNOdent and VistaProof scores than those without caries. Using the optimum cutoff point of 23.5 obtained in our study for DIAGNOdent, sensitivity and specificity were found to be 92.4 and 92.7 %, respectively, while values of 88.1 and 95.1 % were obtained with a cutoff point of 28.5. Sensitivity in the case of the VistaProof system varied between 92.9 % (cutoff point 1.05) and 85.3 % (cutoff point 1.3), with respective specificity values of 95.8 and 88.6 %. The areas under the curve were 0.756, 0.759, 0.954 and 0.965 for the visual and tactile methods and for DIAGNOdent and VistaProof, respectively. The fluorescence-based techniques showed greater internal and external validity than the visual and tactile methods in diagnosing occlusal caries in permanent teeth. VistaProof is the best method for diagnosing caries in its early stages.

Effectiveness of Fluorescence-based Methods in Monitoring Progression of Noncavitated Caries-like Lesions on Smooth Surfaces

Although there has been a significant decrease in caries prevalence in developed countries, the slower progression of dental caries requires methods capable of detecting and quantifying lesions at an early stage. The aim of this study was to evaluate the effectiveness of fluorescence-based methods (DIAGNOdent 2095 laser fluorescence device [LF], DIAGNOdent 2190 pen [LFpen], and VistaProof fluorescence camera [FC]) in monitoring the progression of noncavitated caries-like lesions on smooth surfaces. Caries-like lesions were developed in 60 blocks of bovine enamel using a bacterial model of Streptococcus mutans and Lactobacillus acidophilus. Enamel blocks were evaluated by two independent examiners at baseline (phase I), after the first cariogenic challenge (eight days) (phase II), and after the second cariogenic challenge (a further eight days) (phase III) by two independent examiners using the LF, LFpen, and FC. Blocks were submitted to surface microhardness (SMH) and cross-sectional microhardness analyses. The intraclass correlation coefficient for intra- and interexaminer reproducibility ranged from 0.49 (FC) to 0.94 (LF/LFpen). SMH values decreased and fluorescence values increased significantly among the three phases. Higher values for sensitivity, specificity, and area under the receiver operating characteristic curve were observed for FC (phase II) and LFpen (phase III). A significant correlation was found between fluorescence values and SMH in all phases and integrated loss of surface hardness (ΔKHN) in phase III. In conclusion, fluorescence-based methods were effective in monitoring noncavitated caries-like lesions on smooth surfaces, with moderate correlation with SMH, allowing differentiation between sound and demineralized enamel.

Association between the cariogenicity of a dental microcosm biofilm and its red fluorescence detected by Quantitative Light-induced Fluorescence-Digital (QLF-D)

OBJECTIVE

This study evaluated whether Quantitative Light-induced Fluorescence-Digital (QLF-D) can detect the levels of cariogenicity of dental microcosm biofilms by assessing the red fluorescence intensity.

METHODS

Dental microcosm biofilms were initiated from human saliva on bovine enamel discs. Biofilms with various levels of cariogenicity were then grown in artificial saliva supplemented with sucrose at different concentrations (0.05%, 0.1%, 0.2%, and 0.5%) in 24-well microplates. After 10 days, fluorescence images of the biofilms were captured by the QLF-D to analyse the red fluorescence intensity, which was quantified as the red/green ratio (R/G value). The supernatant pH was also measured, as well as the total and aciduric bacteria counts of the collected biofilms. Mineral loss in enamel was also evaluated by calculating the percentage of surface microhardness changes (%SHC).

RESULTS

The R/G values of the biofilms differed significantly with the sucrose concentration (p<0.0001), increasing consistently as the sucrose concentration increased from 0.05% (=0.91) to 0.5% (=2.56). Strong correlation was identified between the R/G value and the number of aciduric bacteria (r=0.83, p<0.0001), supernatant pH (r=-0.95, p<0.0001), and %SHC (r=0.90, p<0.0001).

CONCLUSIONS

The red fluorescence as observed by the QLF-D was correlated with the cariogenic properties of dental microcosm biofilms in vitro, which indicates that this device can be used to detect the levels of cariogenicity of a dental biofilm.

CLINICAL SIGNIFICANCE

The QLF-D is able to assess the cariogenic levels of dental plaque based on the intensity of red fluorescence.

A novel LED-based device for occlusal caries detection

The aim of this in-vitro study was to compare the performance of laser-based (DIAGNOdent, KaVo, Biberach, Germany) and LED-based (Midwest Caries I.D., DENTSPLY Professional, New York, USA) caries detectors in the detection of occlusal caries in permanent molars. The study consisted of 129 visually sound or non-cavitated pits or fissures in 82 extracted permanent human molar teeth. Two trained examiners used the laser-based and LED-based caries detectors to examine the fissures for caries. The teeth were then sectioned at the surfaces suspected of containing occlusal caries and histologically evaluated using stereomicroscopy as a gold standard. Inter-examiner reliability of the caries detector examination was assessed using Cohen's Kappa statistics. The sensitivity, specificity, and accuracy in diagnosing occlusal caries using the two devices were calculated according to appropriate cut-off scores. Receiver operating characteristic (ROC) curves were also determined to compare the diagnostic performance of the devices in occlusal caries diagnosis. The cut-off level of significance was taken as p = 0.005. Cohen's Kappa showed substantial agreement for the laser-based caries detector (0.74), and almost perfect agreement for the LED-based (0.89) caries detector. The specificity of the laser-based device varied from 0.49 to 0.97 at T1 and T2. Its sensitivity varied from 0.33 to 0.65 at T1 and T2. The specificity of the LED-based device varied from 0.48 to 0.56 at T1 and T2. Its sensitivity varied from 0.65 to 0.84 at T1 and from 0.80 to 0.84 at T2. Taking the limitations of the current study into consideration, the DIAGNOdent laser pen was more accurate in determining when teeth were free of occlusal caries than was the Midwest Caries I.D. LED-based device, although the Midwest Caries I.D. device more often revealed the presence of occlusal caries than did the DIAGNOdent pen.

Randomized controlled trial on fluoride varnish application for treatment of white spot lesion after fixed orthodontic treatment

The purpose of this study was to determine the efficacy of fluoride varnish (5% sodium fluoride, Duraphat(®), Colgate) in reverting white spot lesions (WSLs) after fixed orthodontic treatment. This study was a randomized, parallel group, controlled clinical trial. Using saline solution as control, 110 participants (mean age ± standard deviation: 16.6 ± 3.2 years) ranging from 12 to 22 years old were randomly assigned to either the test group (group 1) or the control group (group 2). Application of fluoride varnish or saline was applied onto tooth surfaces with WSLs every month during the first 6 months after debonding. The labial (buccal) surfaces of the teeth were assessed by the use of a DIAGNOdent pen (DD) at the baseline, 3- and 6-month follow-up visits. After 6 months, 96 subjects with a total of 209 study teeth (47 subjects, 104 teeth in group 1; 49 subjects, 105 teeth in group 2) remained. The WSLs had a mean DD reading at baseline of 17.66 ± 5.36 in group 1 and 16.19 ± 5.70 in group 2, which decreased by 5.78 and 2.44, respectively, at the 3-month follow-up visit and decreased by 7.56 and 3.09, respectively, at the 6-month follow-up visit. The mean baseline DD readings in the two groups were similar (t test, P > 0.05). There was statistically significant differences between the mean DD readings of the two groups at the 3-month (P < 0.05) and at the 6-month follow-up visits (P < 0.01). Topical fluoride varnish application is effective in reversing WSLs after debonding and should be advocated as a routine caries prevention measure after orthodontic treatment.