Optimization of novel pentablock copolymer based composite formulation for sustained delivery of peptide/protein in the treatment of ocular diseases

Octreotide and Octreotide-derived delivery systems

Pharmaceutical peptide Octreotide is a somatostatin analog with targeting and therapeutic abilities. Over the last decades, Octreotide has been developed and approved to treat acromegaly and neuroendocrine tumours, and Octreotide-based radioactive conjugates have been leveraged clinically to detect small neuroendocrine tumour sites. Meanwhile, variety of Octreotide-derived delivery strategies have been proposed and explored for tumour targeted therapeutics or diagnostics in preclinical or clinical settings. In this review, we especially focus on the preclinical development and applications of Octreotide-derived drug delivery systems, diagnostic nanosystems, therapeutic nanosystems and multifunctional nanosystems, we also briefly discuss challenges and prospects of these Octreotide-derived delivery systems.

Sustained release ocular drug delivery systems for glaucoma therapy

INTRODUCTION

Glaucoma is a group of progressive optic neuropathies resulting in irreversible blindness. It is associated with an elevation of intraocular pressure (>21 mm Hg) and optic nerve damage. Reduction of the intraocular pressure (IOP) through the administration of ocular hypotensive eye drops is one of the most common therapeutic strategies. Patient adherence to conventional eye drops remains a major obstacle in preventing glaucoma progression. Additional problems emerge from inadequate patient education as well as local and systemic side effects associated with adminstering ocular hypotensive drugs.

AREAS COVERED

Sustained-release drug delivery systems for glaucoma treatment are classified into extraocular systems including wearable ocular surface devices or multi-use (immediate-release) eye formulations (such as aqueous solutions, gels; ocular inserts, contact lenses, periocular rings, or punctual plugs) and intraocular drug delivery systems (such as intraocular implants, and microspheres for supraciliary drug delivery).

EXPERT OPINION

Sustained release platforms for the delivery of ocular hypotensive drugs (small molecules and biologics) may improve patient adherence and prevent vision loss. Such innovations will only be widely adopted when efficacy and safety has been established through large-scale trials. Sustained release drug delivery can improve glaucoma treatment adherence and reverse/prevent vision deterioration. It is expected that these approaches will improve clinical management and prognosis of glaucoma.

Ocular Delivery of Therapeutic Proteins: A Review

Therapeutic proteins, including monoclonal antibodies, single chain variable fragment (ScFv), crystallizable fragment (Fc), and fragment antigen binding (Fab), have accounted for one-third of all drugs on the world market. In particular, these medicines have been widely used in ocular therapies in the treatment of various diseases, such as age-related macular degeneration, corneal neovascularization, diabetic retinopathy, and retinal vein occlusion. However, the formulation of these biomacromolecules is challenging due to their high molecular weight, complex structure, instability, short half-life, enzymatic degradation, and immunogenicity, which leads to the failure of therapies. Various efforts have been made to overcome the ocular barriers, providing effective delivery of therapeutic proteins, such as altering the protein structure or including it in new delivery systems. These strategies are not only cost-effective and beneficial to patients but have also been shown to allow for fewer drug side effects. In this review, we discuss several factors that affect the design of formulations and the delivery of therapeutic proteins to ocular tissues, such as the use of injectable micro/nanocarriers, hydrogels, implants, iontophoresis, cell-based therapy, and combination techniques. In addition, other approaches are briefly discussed, related to the structural modification of these proteins, improving their bioavailability in the posterior segments of the eye without affecting their stability. Future research should be conducted toward the development of more effective, stable, noninvasive, and cost-effective formulations for the ocular delivery of therapeutic proteins. In addition, more insights into preclinical to clinical translation are needed.

Emerging innovations in nano-enabled therapy against age-related macular degeneration: A paradigm shift

Age-related macular degeneration (AMD), a degenerative eye disease, is the major cause of irreversible loss of vision among individuals aged 50 and older. Both genetic and environmental factors are responsible for the progressive damage to central vision. It is a multifactorial retinal disease with features such as drusen, hypopigmentation and/or hyperpigmentation of the retinal pigment epithelium, and even choroidal neovascularization in certain patients. AMD is of two major forms: exudative (wet) and atrophic (dry) with changes affecting the macula leading to impaired vision. Although the retina remains an accessible portion for delivering drugs, there are no current options to cure or treat AMD. The existing expensive therapeutics are unable to treat the underlying pathology but display several side effects. However, recent innovations in nanotherapeutics provide an optimal alternative of drug delivery to treat the neovascular condition. These new-age technologies in the nanometer scale would enhance bioactivity and improve the bioavailability of drugs at the site of action to treat AMD. The nanomedicine also provides sustained release of the drug with prolonged retention after penetrating across the ocular tissues. In this review, the insights into the cellular and molecular mechanisms associated with the pathophysiology of AMD are provided. It also serves to review the current progress in nanoparticle-based drug delivery systems that offer feasible treatments in AMD.

Injectable in-situ gel depot system for targeted delivery of biologics to the retina

In current clinical settings, frequent intravitreal (IVT) injections of anti-vascular endothelial growth factors are used due to their short in-vivo half-life and rapid clearance from the back of the eye. The IVT injections are associated with pain, risk of infection, retinal detachment, and financial burden. Biologics molecules can undergo physical, chemical, and enzymatic degradation during formulation development and in the biological environment. Moreover, the complex ocular structures also act as a rate-limiting barrier for these biologics. Thus, delivering stable and clinically relevant biologics concentration to the back of the eye is still a challenge. Compare to other drug delivery platforms, injectable in-situ gelling depot systems (IISGDs) have emerged as an effective system for biologics delivery. In this review, we have discussed various biologics used in ocular therapeutics and their associated challenges. Different routes of delivery and associated tissue barriers are also discussed. Different types of IISGDs developed to date for biologics delivery to the back of the eye were also covered. To conclude, various critical parameters related to the formulation development process and injectable depot systems that need careful consideration and further investigations were highlighted.

Regulation of the Ocular Cell/Tissue Response by Implantable Biomaterials and Drug Delivery Systems

Therapeutic advancements in the treatment of various ocular diseases is often linked to the development of efficient drug delivery systems (DDSs), which would allow a sustained release while maintaining therapeutic drug levels in the target tissues. In this way, ocular tissue/cell response can be properly modulated and designed in order to produce a therapeutic effect. An ideal ocular DDS should encapsulate and release the appropriate drug concentration to the target tissue (therapeutic but non-toxic level) while preserving drug functionality. Furthermore, a constant release is usually preferred, keeping the initial burst to a minimum. Different materials are used, modified, and combined in order to achieve a sustained drug release in both the anterior and posterior segments of the eye. After giving a picture of the different strategies adopted for ocular drug release, this review article provides an overview of the biomaterials that are used as drug carriers in the eye, including micro- and nanospheres, liposomes, hydrogels, and multi-material implants; the advantages and limitations of these DDSs are discussed in reference to the major ocular applications.

Ocular Drug Delivery: Present Innovations and Future Challenges

Ocular drug delivery has always been a challenge for ophthalmologists and drug-delivery scientists due to the presence of various anatomic and physiologic barriers. Inimitable static and dynamic ocular barriers not only exclude the entry of xenobiotics but also discourage the active absorption of therapeutic agents. Designing an ideal delivery scheme should include enhanced drug bioavailability and controlled release of drug at the site of action, which can overcome various ocular barriers. Conventional ophthalmic medications include the use of topical eye drops and intravitreal injections of anti-vascular endothelial growth factor agent for treatment of anterior and posterior segment disorders, respectively. Current inventions for anterior ocular segment disorders such as punctum plugs, ocular implants, drug-eluting contact lenses, and ocular iontophoresis represent state-of-the-art inventions for sustained and controlled drug release. Parallel efforts for ocular drug delivery technologies for back of the eye disorders have resulted in the approval of various intravitreal implants. Novel drug-delivery technologies, including nanoparticles, nanomicelles, dendrimers, microneedles, liposomes, and nanowafers, are increasingly studied for anterior and posterior disorders. To achieve patient compliance for back of the eye disorders, novel approaches for noninvasive delivery of potent therapeutic agents are on the rise. In this review article, we discuss past successes, present inventions, and future challenges in ocular drug-delivery technologies. This expert opinion also discusses the future challenges for ocular drug-delivery systems and the clinical translatable potential of nanotechnology from benchtop to bedside.

PSMA Antibody-Conjugated Pentablock Copolymer Nanomicellar Formulation for Targeted Delivery to Prostate Cancer

The main purpose of this study was to develop a prostate-specific membrane antigen (PSMA) antibody-conjugated drug-loaded nanomicelles using MPEG--PLA-PCL-PLA-PEG-NH2 pentablock copolymer for targeted delivery of hydrophobic anticancer drugs to prostate cancer cells. During this experiment, monomers of L-lactide, ε-caprolactone, poly(ethylene glycol)-methyl ether, and poly(ethylene glycol)-NH2 were used to prepare pentablock copolymer using the ring opening technique. The pentablock nanomicellar (PBNM) formulation was prepared by the evaporation-rehydration method. The resultant pentablock nanomicelles were then conjugated with PSMA antibody resulting in PSMA-Ab-PTX-PBNM. Both the block copolymers and the nanomicelles were analyzed by hydrogen nuclear magnetic resonance (H-NMR), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The obtained nanomicelles (NM) were then analyzed for size and zeta potential using dynamic light scattering-dynamic laser scattering (DLS) and then further submitted to H-NMR and TEM analyses. The XRD, FTIR, and the H-NMR analyses confirmed the structure of the pentablock copolymers. The average size for conjugated nanomicellar was 45 nm ± 2.5 nm. The average (ζ-potential) was around - 28 mV. H-NMR and FTIR analysis done on PSMA-coupled paclitaxel-loaded PBNM showed peaks characteristic of the drug (paclitaxel) and the polymer, confirming the successful encapsulation. TEM analysis showed well-defined spherical morphology and confirmed the size range obtained by the DLS. In vitro release studies revealed sustained slow of PTX in phosphate buffer solution (PBS). Confocal scanning microscopy (TEM) of coumarin6-loaded in PBNM indicated that pentablock nanomicelles were internalized into the prostate cancer (PC-3) cells. Cell proliferation assay showed that nanomicelles ferried paclitaxel into the PC-3 cells and subsequently reduced the cell proliferation. The results depict PTX-PBNM-Ab as a suitable carrier for targeted delivery of drugs to prostate cancer cells.

Novel Random Triblock Copolymers for Sustained Delivery of Macromolecules for the Treatment of Ocular Diseases

The objective of this study is to design, develop, and synthesize novel random triblock (RTB) copolymers for sustained delivery of macromolecules. RTB copolymers have not been utilized for the delivery of macromolecules for ocular diseases. RTB copolymers comprising of polyethylene glycol, glycolide, and ɛ-caprolactone blocks were synthesized and assessed for their molecular weights and purity using ¹H-NMR spectroscopy, gel permeation chromatography, FTIR (functionality), and XRD (crystallinity). No toxicity was observed when ocular cell lines were treated with RTB copolymers. These materials were applied for encapsulation of peptides and proteins (catalase, IgG, BSA, IgG Fab fragment, lysozyme, insulin, and octreotide) in nanoparticles. Particle size ranged from 202.41 ± 2.45 to 300.1 ± 3.11 nm depending on the molecular size and geometry of proteins/peptides. Polydispersity indices were between 0.26 ± 0.02 and 0.46 ± 0.07 respectively. Percentage entrapment efficiency and drug loading ranged from 83.44 ± 2.24 to 45.35 ± 5.53 and 21.56 ± 0.46 to 13.08 ± 1.35 respectively depending on molecular weights of peptides or proteins. A sustained in vitro release of macromolecule was observed over 3-month period. These results suggest that RTB copolymers may be suitable for sustained delivery systems for various macromolecules for different diseases including ocular diseases.

Nanoparticles in thermosensitive gel based composite nanosystem for ocular diseases

The pentablock (PB) copolymers based composite nanosystems were designed to provide a long-term delivery of macromolecules to the back of the eye. A unique arrangement of each block (polyethylene glycol, polylactic acid, and polycaprolactone) with various molecular weights (PB-A and PB-B) was selected for the synthesis of nanoparticles (NPs) and thermosensitive gel (PB-C) by sequential ring-opening bulk copolymerization reaction. PB copolymers were characterized for their molecular weight and purity by ¹H-NMR spectroscopy and crystallinity by PXRD. The macromolecule model drugs [lysozyme (Lyz ~ 14.5 kDa), IgG-Fab (~ 50 kDa), and IgG (~ 150 kDa)] were selected to delineate the effect of molecular weights on in vitro release profile of nanoformulations. Lyz-, Fab-, and IgG-encapsulated NPs were prepared by double emulsion solvent evaporation method. The entrapment efficiency (EE%) and drug loading (DL%) of macromolecules was higher for PB-B copolymers due to its higher molecular weight and hydrophobicity compare to PB-A. The particle size range of NPs was ~ 200-270 nm. In vitro release profiles of Lyz-, Fab-, and IgG-encapsulated in NPs alone and NPs suspended in gel (composite nanosystem) demonstrated a minimal burst release and drug release over a long period. The effect of hydrodynamic diameter of macromolecules and hydrophobicity of PB copolymers was investigated on the release profile of nanosystems. In vitro biocompatibility study showed negligible cytokine (IL-1, IL-6, and TNF-α) release, which confirmed the safety of the PB copolymers. Based on the results, it is anticipated that long-term ocular delivery of macromolecules can be achieved through composite nanosystems.

Strategic Pentablock Copolymer Nanomicellar Formulation for Paclitaxel Delivery System

Nanomicelles (NM) enhance solubility and absorption of active pharmaceutical ingredients (APIs). Various polymers and non-polymers are utilized to prepare nanomicellar formulations to achieve high absorption and delivery of drugs. The main purpose of this study was to develop drug-loaded nanomicelles with pentablock copolymers for paclitaxel delivery. Monomers of lactide, ε-caprolactone, and polyethylene-glycol were utilized to prepare pentablock copolymer by ring opening technique. The pentablock nanomicelles (PBNM) were formulated by evaporation and rehydration. Both copolymers and nanomicelles were analyzed by H-NMR, FTIR, and XRD. Nanomicelles were further analyzed for size and zeta potential using dynamic light scattering (DLS) and by H-NMR and TEM. The XRD, FTIR, and H-NMR analyses confirmed the structures of the pentablock copolymers. Average size was 20 nm ± 5.00 nm, and ζ-potential is around zero. H-NMR and FTIR analyses for Paclitaxel-PBNM indicated peaks of paclitaxel and the polymer, confirming successful encapsulation. TEM showed spherical morphology and size range similar to that obtained by DLS. In vitro release studies revealed slow first-order paclitaxel release rate from pentablock nanomicelles in phosphate buffer solution (PBS). Confocal laser scanning microscopy analysis with coumarin-6-loaded in PBNM indicated that pentablock nanomicelles were efficiently taken into prostate cancer (PC-3) cells. Cell proliferation assay showed that nanomicelles were able to ferry adequate amounts of paclitaxel drug into PC-3 cells and subsequently inhibiting PC-3 cell proliferation significantly. Results confirmed that pentablock copolymer can generate drug-loaded nanomicelles with desirable sizes and zeta potential. These demonstrate potentiality of pentablock nanomicelles as carrier for anticancer delivery.

Ocular delivery of proteins and peptides: Challenges and novel formulation approaches

The impact of proteins and peptides on the treatment of various conditions including ocular diseases over the past few decades has been advanced by substantial breakthroughs in structural biochemistry, genetic engineering, formulation and delivery approaches. Formulation and delivery of proteins and peptides, such as monoclonal antibodies, aptamers, recombinant proteins and peptides to ocular tissues poses significant challenges owing to their large size, poor permeation and susceptibility to degradation. A wide range of advanced drug delivery systems including polymeric controlled release systems, cell-based delivery and nanowafers are being exploited to overcome the challenges of frequent administration to ocular tissues. The next generation systems integrated with new delivery technologies are anticipated to generate improved efficacy and safety through the expansion of the therapeutic target space. This review will highlight recent advances in formulation and delivery strategies of protein and peptide based biopharmaceuticals. We will also describe the current state of proteins and peptides based ocular therapy and future therapeutic opportunities.

Pentablock copolymer dexamethasone nanoformulations elevate MYOC: in vitro liberation, activity and safety in human trabecular meshwork cells

AIM

The aim of this study is to examine the elevation of MYOC in long-term treatment of human trabecular meshwork (HTM) cells using dexamethasone (DEX) encapsulated pentablock (PB) copolymer-based nanoparticles (NPs) (DEX-PB-NPs).

MATERIALS & METHODS

PB copolymers and DEX-PB-NPs were synthesized and characterized using nuclear magnetic resonance, gel permeation chromatography, and X-ray diffraction analyses. MYOC levels secreted from HTM cells were measured by western blot (WB) analysis.

RESULTS

DEX-PB-NPs were formulated in the size range of 109 ± 3.77 nm (n = 3). A long term DEX release from the NPs was observed over three months. Cell viability and cytotoxicity were not affected up to 12 weeks of treatment with PB-copolymer or DEX-PB-NPs. WB data from five HTM cell strains showed that MYOC levels increased by 5.2 ± 1.3, 7.4 ± 4.3, and 2.8 ± 1.1-fold in the presence of DEX-PB-NPs compared with 9.2 ± 3.8, 2.2 ± 0.5, and 1.5 ± 0.3-fold at 4, 8 and 12 weeks in control-DEX treatment group, respectively (n = 5). Based on the decline in MYOC levels after withdrawal of DEX from control wells, DEX-PB-NPs released the DEX for at least 10 weeks.

CONCLUSION

The treatment of HTM cells using DEX-PB-NPs were analyzed in this study. The in vitro cell-based system developed here is a valuable tool for determining the safety and effects of steroids released from polymeric NPs.

Novel Pentablock Copolymers as Thermosensitive Self-Assembling Micelles for Ocular Drug Delivery

Many studies have focused on how drugs are formulated in the sol state at room temperature leading to the formation of in situ gel at eye temperature to provide a controlled drug release. Stimuli-responsive block copolymer hydrogels possess several advantages including uncomplicated drug formulation and ease of application, no organic solvent, protective environment for drugs, site-specificity, prolonged and localized drug delivery, lower systemic toxicity, and capability to deliver both hydrophobic and hydrophilic drugs. Self-assembling block copolymers (such as diblock, triblock, and pentablock copolymers) with large solubility variation between hydrophilic and hydrophobic segments are capable of making temperature-dependent micellar assembles, and with further increase in the temperature, of jellifying due to micellar aggregation. In general, molecular weight, hydrophobicity, and block arrangement have a significant effect on polymer crystallinity, micelle size, and in vitro drug release profile. The limitations of creature triblock copolymers as initial burst release can be largely avoided using micelles made of pentablock copolymers. Moreover, formulations based on pentablock copolymers can sustain drug release for a longer time. The present study aims to provide a concise overview of the initial and recent progresses in the design of hydrogel-based ocular drug delivery systems.

Nanocarrier fabrication and macromolecule drug delivery: challenges and opportunities

Macromolecules (proteins/peptides) have the potential for the development of new therapeutics. Due to their specific mechanism of action, macromolecules can be administered at relatively low doses compared with small-molecule drugs. Unfortunately, the therapeutic potential and clinical application of macromolecules is hampered by various obstacles including their large size, short in vivo half-life, phagocytic clearance, poor membrane permeability and structural instability. These challenges have encouraged researchers to develop novel strategies for effective delivery of macromolecules. In this review, various routes of macromolecule administration (invasive/noninvasive) are discussed. The advantages/limitations of novel delivery systems and the potential role of nanotechnology for the delivery of macromolecules are elaborated. In addition, fabrication approaches to make nanoformulations in different shapes and sizes are also summarized.