Tableting properties of silica aerogel and other silicates

Reviewing the Impact of Powder Cohesion on Continuous Direct Compression (CDC) Performance

The pharmaceutical industry is undergoing a paradigm shift towards continuous processing from batch, where continuous direct compression (CDC) is considered to offer the most straightforward implementation amongst powder processes due to the relatively low number of unit operations or handling steps. Due to the nature of continuous processing, the bulk properties of the formulation will require sufficient flowability and tabletability in order to be processed and transported effectively to and from each unit operation. Powder cohesion presents one of the greatest obstacles to the CDC process as it inhibits powder flow. As a result, there have been many studies investigating potential manners in which to overcome the effects of cohesion with, to date, little consideration of how these controls may affect downstream unit operations. The aim of this literature review is to explore and consolidate this literature, considering the impact of powder cohesion and cohesion control measures on the three-unit operations of the CDC process (feeding, mixing, and tabletting). This review will also cover the consequences of implementing such control measures whilst highlighting subject matter which could be of value for future research to better understand how to manage cohesive powders for CDC manufacture.

Amalgamation of solid dispersion and melt adsorption techniques for augmentation of oral bioavailability of novel anticoagulant rivaroxaban

The objective of the present study was to evaluate the potential of solid dispersion adsorbate (SDA) to improve the solubility and bioavailability of rivaroxaban (RXN). SDA of RXN was developed by fusion method using PEG 4000 as carrier and Neusilin as adsorbent. A 3² full factorial design was utilized to formulate various SDAs. The selected independent variables were the amount of carrier (X₁) and amount of adsorbent (X₂). The responses measured were the time required for 85% drug release (Y₁) and saturated solubility (Y₂). MTT assay was employed for cytotoxicity studies on Caco-2 cells. In vivo pharmacokinetics and pharmacodynamic evaluations were carried out to assess the prepared SDA. Pre-compression evaluation of SDA suggests the prepared batches (B1-B9) possess adequate flow properties and could be used for compression of tablets. Differential scanning calorimetry and X-ray diffraction data signified the conversion of the crystalline form of drug to amorphous form, a key parameter accountable for improvement in drug dissolution. Optimization data suggests that the amount of carrier and amount of adsorbent significantly (P < 0.05) influence both dependent variables. Post-compression data signifies that the compressibility behavior of prepared tablets was within the official standard limits. A significant increase (P < 0.0001) in the in vitro dissolution characteristics of RXN was noticed in optimized SDA (> 85% in 10 min) as compared to the pure drug, marketed product, and directly compressible tablet. Cytotoxicity studies confirmed the nontoxicity of prepared RXN SDA tablets. RXN SDA tablets exhibited 2.79- and 1.85-fold higher AUC in comparison to RXN suspension and Xarelto tablets respectively indicating improved oral bioavailability. Higher bleeding time and percentage of platelet aggregation noticed with RXN SDA tablets in comparison to RXN suspension further substantiate the efficacy of the prepared formulation. In summary, the results showed the potential of RXN SDA tablets to enhance the bioavailability of RXN and hence can be an alternate approach of solid dosage form for its development for commercial application.

Amorphization and modified release of ibuprofen by post-synthetic and solvent-free loading into tailored silica aerogels

Promising active pharmaceutical ingredients (APIs) often exhibit poor aqueous solubility and thus a low bioavailability that substantially limits their pharmaceutical application. Hence, efficient formulations are required for an effective translation into highly efficient drug products. One strategy is the preservation of an amorphous state of the API within a carrier matrix, which leads to enhanced dissolution. In this work, mesoporous silica aerogels (SA) were utilized as a carrier matrix for the amorphization of the poorly water-soluble model drug ibuprofen. Loading of tailored SA was performed post-synthetically and solvent-free, either by co-milling or via the melting method. Thorough analyses of these processes demonstrated the influence of macrostructural changes during the drying and grinding process on the microstructural properties of the SA. Furthermore, interfacial SA-drug interaction properties were selectively tuned by attaching terminal hydrophilic amino- or hydrophobic methyl groups to the surface of the gel. We demonstrate that not only the chemical surface properties of the SA, but also formulation-related parameters, such as the carrier-to-drug ratio, as well as process-related parameters, such as the drug loading method, decisively influence the ibuprofen adsorption efficiency. In addition, the drug-loaded SA formulations exhibited a remarkable physical stability over a period of 6 months. Furthermore, the release behavior is shown to change considerably with different surface properties of the SA matrix. Hence, the reported results demonstrate that utilizing specifically processed and modified SA offers a compelling technique for enhancement of the bioavailability of poorly-water soluble APIs and a versatile adjustment of their release profile.

Surface Modifiers on Composite Particles for Direct Compaction

Direct compaction (DC) is considered to be the most effective method of tablet production. However, only a small number of the active pharmaceutical ingredients (APIs) can be successfully manufactured into tablets using DC since most APIs lack adequate functional properties to meet DC requirements. The use of suitable modifiers and appropriate co-processing technologies can provide a promising approach for the preparation of composite particles with high functional properties. The purpose of this review is to provide an overview and classification of different modifiers and their multiple combinations that may improve API tableting properties or prepare composite excipients with appropriate co-processed technology, as well as discuss the corresponding modification mechanism. Moreover, it provides solutions for selecting appropriate modifiers and co-processing technologies to prepare composite particles with improved properties.

Multifunctional Role of Silica in Pharmaceutical Formulations

Due to the high surface area, adjustable surface and pore structures, and excellent biocompatibility, nano- and micro-sized silica have certainly attracted the attention of many researchers in the medical fields. This review focuses on the multifunctional roles of silica in different pharmaceutical formulations including solid preparations, liquid drugs, and advanced drug delivery systems. For traditional solid preparations, it can improve compactibility and flowability, promote disintegration, adjust hygroscopicity, and prevent excessive adhesion. As for liquid drugs and preparations, like volatile oil, ethers, vitamins, and self-emulsifying drug delivery systems, silica with adjustable pore structures is a good adsorbent for solidification. Also, silica with various particle sizes, surface characteristics, pore structure, and surface modification controlled by different synthesis methods has gained wide attention owing to its unparalleled advantages for drug delivery and disease diagnosis. We also collate the latest pharmaceutical applications of silica sorted out by formulations. Finally, we point out the thorny issues for application and survey future trends pertaining to silica in an effort to provide a comprehensive overview of its future development in the medical fields. Graphical Abstract.

Technology of Processing Plant Extracts Using an Aluminometasilicate Porous Carrier into a Solid Dosage Form

A method of preparing tablets called liquisolid technique is currently emerging. In these formulations, an important role is played by porous carriers, which are the basic building blocks of liquisolid systems (LSSs). The most common are microcrystalline cellulose (MCC), magnesium aluminometasilicates, silica aerogels, mesoporous silicates, clays, etc. In this study, magnesium aluminometasilicate is used to prepare modified LSS formulations with plant extracts as model drugs dissolved in water (W) or ethanol (E). The modification involves drying tablets in a microwave (MW) and hot air dryer (HA) for a specified period. Powder blends and tablets were evaluated for physical properties, and their antioxidant activity (AA) was measured in a modified dissolution by ferric reducing antioxidant power assay (FRAP). PLS and ANOVA were used to compare tablets properties depending on the composition and technology. The experiment is based on a previous one, in which the plant extracts were processed into tablets using a similar method. Therefore, extending the study to include more plants and the robust statistical evaluation and comparison of the products was a procedure to justify the suitability of the presented method for a wide range of liquid plant extracts. As a result, we obtained tablets with excellent physical properties, including a short disintegration and dissolution, which is problematic in tableted extracts.

The importance of the coating material type and amount in the preparation of liquisolid systems based on magnesium aluminometasilicate carrier

Albeit the preparation of liquisolid systems represents an innovative approach to enhance the dissolution of poorly soluble drugs, their broader utilization is still limited mainly due to the problematic conversion of the liquid into freely flowing and readily compressible powder. Accordingly, the presented study aims to determine the optimal carrier/coating material ratio (R value) for formulations based on magnesium aluminometasilicate (NUS2) loaded with polyethylene glycol 400. Four commercially available colloidal silica were used as coating materials in nine different R values (range of 5 - 100). The obtained results suggested that the higher R value leads to the superior properties of powder mixtures, such as better flowability, as well as compacts with higher tensile strength and lower friability. Moreover, it was observed that the type of coating material impacts the properties of liquisolid systems due to the different arrangement of particles in the liquisolid mixture. To confirm the noted dependency of R value and coating material type, the one- and two-way ANOVA, linear regression and principal component analysis (PCA) techniques were performed. In addition, a comparison of results with the properties of loaded NUS2 itself revealed that LSS with sufficient properties may be prepared even without the coating material.

Texture and surface feature-mediated striking improvements on multiple direct compaction properties of Zingiberis Rhizoma extracted powder by coprocessing with nano-silica

The study aims to markedly improve direct compaction (DC) properties of Zingiberis Rhizoma extracted powder (ZR) by modifying its texture and surface properties with nano-silica (NS). A wet coprocessing method was applied to evenly distribute up to 33.3% NS to ZR. To clarify uniqueness of NS, microcrystalline cellulose (MCC), a superior filler-binder in DC, was used as control. Coprocessed particles and physical mixtures (PMs) were comprehensively evaluated for surface features, micromeritic properties, and texture and compacting parameters. Compared to MCC, NS could more significantly modify the texture and surface features of ZR (e.g., hardness, cohesiveness, yield pressure, and nanoscaled surface roughness) via coprocessing, resulting in more striking improvements on multiple DC properties of ZR, including tabletability, flowability, lubricant sensitivity, hygroscopicity, etc. Especially, tensile strength (σ_t) of coprocessed ZR-NS (1:0.5) tablets was 4.62 and 3.22 times that of ZR and ZR-MCC counterparts pressed at 210 MPa, respectively. Moreover, percolation thresholds of σ_t enhancement were observed for ZR-NSs, but not for ZR-MCCs. Evaluation by the SeDeM expert system indicated that some ZR-NSs (but no ZR-MCCs) were qualified for DC. Collectively, coprocessing with NS by liquid dispersion appears to be a novel, effective, and pragmatic option for DC of drugs like ZR.

Stress-Dependent Particle Interactions of Magnesium Aluminometasilicates as Their Performance Factor in Powder Flow and Compaction Applications

In the pharmaceutical industry, silicates are commonly used excipients with different application possibilities. They are especially utilized as glidants in low concentrations, but they can be used in high concentrations as porous carriers and coating materials in oral solid drug delivery systems. The desirable formulations of such systems must exhibit good powder flow but also good compactibility, which brings opposing requirements on inter-particle interactions. Since magnesium aluminometasilicates (MAS) are known for their interesting flow behavior reported as "negative cohesivity" yet they can be used as binders for tablet compression, the objective of this experimental study was to investigate their particle interactions within a broad range of mechanical stress from several kPa to hundreds of MPa. Magnesium aluminometasilicate (Neusilin^® US2 and Neusilin^® S2)-microcrystalline cellulose (Avicel^® PH102) physical powder mixtures with varying silicate concentrations were prepared and examined during their exposure to different pressures using powder rheology and compaction analysis. The results revealed that MAS particles retain their repulsive character and small contact surface area under normal conditions. If threshold pressure is applied, the destruction of MAS particles and formation of new surfaces leading to particle interactions are observed. The ability of MAS particles to form interactions intensifies with increasing pressure and their amount in a mixture. This "function switching" makes MAS suitable for use as multifunctional excipients since they can act as a glidant or a binder depending on the applied pressure.

Deep machine learning interatomic potential for liquid silica

The use of machine learning to develop neural network potentials (NNP) representing the interatomic potential energy surface allows us to achieve an optimal balance between accuracy and efficiency in computer simulation of materials. A key point in developing such potentials is the preparation of a training dataset of ab initio trajectories. Here we apply a deep potential molecular dynamics (DeePMD) approach to develop NNP for silica, which is the representative glassformer widely used as a model system for simulating network-forming liquids and glasses. We show that the use of a relatively small training dataset of high-temperature ab initio configurations is enough to fabricate NNP, which describes well both structural and dynamical properties of liquid silica. In particular, we calculate the pair correlation functions, angular distribution function, velocity autocorrelation functions, vibrational density of states, and mean-square displacement and reveal a close agreement with ab initio data. We show that NNP allows us to expand significantly the time-space scales achievable in simulations and thus calculating dynamical and transport properties with more accuracy than that for ab initio methods. We find that developed NNP allows us to describe the structure of the glassy silica with satisfactory accuracy even though no low-temperature configurations were included in the training procedure. The results obtained open up prospects for simulating structural and dynamical properties of liquids and glasses via NNP.

SELECTION OF FLAVOUR ADDITIVES AND METHOD OF THEIR INTRODUCTION IN THE COMPOSITION OF COMPRESSED MEDICATED CHEWING GUMS

An important characteristic of oral medicines, which include medicated chewing gums, is their pleasant taste. This can be achieved by adding taste coregents to their composition. The aim: to choose rational flavour additives and justify the method of their introduction to the compressed medicated chewing gums that are being developed. Materials and methods: mint (Natural Mint Flavor SD, Kerry Inc., Malaysia), apple (Nat Apple FlavorWonf, Kerry Inc., Malaysia) and banana (Banana FLV, Kerry Inc., Malaysia) have been used as powdered flavour additives. As flavourings – oil solutions: Peppermint Natural WonfFlavor, Kerry Inc., Malaysia), Apple (Nat Apple FlavorWonf, Kerry Inc., Malaysia), Strawberry (Strawberry FlavorWonf, Kerry Inc., Malaysia), Melon (Chemical-Food Aromatic PlantLLC, Russian Federation) and Lemon (Chemical-Food Aromatic Plant LLC, Russian Federation). Aerosil brand 380 (Evonik Resource Efficiency GmbH, Germany), Syloid® 244FP (Grace Discovery Sciences, USA) and Neusilin® ULP 2 (Fuji Chemical Industry Co. Ltd, Japan) have been taken as carriers. The choice of flavour additives and flavourings was made using organoleptic methods of coregents evaluation according to A. I. Tentsova and I. A.Yegorov. The technological and physicochemical properties of the samples were studied according to conventional methods of the State Pharmacopoeia of Ukraine. Results and discussion. In determining the taste of medicated chewing gums samples with different coregents, the combination of powder additive and liquid flavouring "Apple" has got the highest mark. In order to substantiate the rational method of liquid flavouring introduction in the composition of the compressed chewing gums, it is proposed to introduce the adsorbents Aerosil 380, Syloid® 244FP and Neusilin® ULP 2, which also play the role of moisture regulators and glidants. Microscopic analysis of adsorbents mixtures with flavouring, as well as physicochemical and technological investigations of the mass for pressing have revealed that the best adsorbing, moisture-regulating and flow properties has Syloid® 244FP. Conclusions. As a coregent in medicated chewing gums was selected a combination of powdered (2.0 %) and liquid (0.6 %) flavours “Apple”. The method of introducing the oil flavouring into the composition of the compressed gums has been chosen – by spraying on the adsorbent with subsequent mixing. Based on the studies, Syloid®244FP at a concentration of 1.0 % was chosen as the rational carrier.

Instrumented Indentation of Super-Insulating Silica Compacts

Highly porous silica compacts for superinsulation were characterized by instrumented indentation. Samples showed a multi-scale stacking of silica particles with a total porous fraction of 90 vol %. The two main sources of silica available for the superinsulation market were considered: fumed silica and precipitated silica. The compacts processed with these two silica displayed different mechanical properties at a similar porosity fraction, thus leading to different usage properties, as the superinsulation market requires sufficient mechanical properties at the lowest density. The measurement of Young’s modulus and hardness was possible with spherical indentation, which is an efficient method for characterizing highly porous structures. Comparison of the mechanical parameters measured on silica compacts and silica aerogels available from the literature was made. Differences in mechanical properties between fumed and precipitated compacts were explained by structural organization.

Systematic Development of Self-Nanoemulsifying Liquisolid Tablets to Improve the Dissolution and Oral Bioavailability of an Oily Drug, Vitamin K1

The purpose of this study is to improve the dissolution and oral bioavailability of an oily drug, vitamin K1 (VK1) by combination of self-nanoemulsifying and liquisolid technologies. The optimal liquid self-nanoemulsifying drug delivery systems (SNEDDS) formulation including VK1 (oil), mixture of soybean lecithin and glycocholic acid (surfactant) and Transcutol HP (cosurfactant) was obtained according to ternary phase diagrams and a central composite design. Based on compatibility, adsorption capacity and dissolution profile, liquid SNEDDS was then solidified on Fujicalin^® to form solid SNEDDS by liquisolid technology and compressed directly with excipients into self-nanoemulsifying liquisolid (SNE-L) tablets. Uniform nano-emulsion suspension was formed rapidly when the SNE-L tablets disintegrated in dissolution media and higher drug dissolution was observed compared with the conventional tablets. The results of pharmacokinetic study in beagle dogs showed that the mean C_max and the area under the curve of SNE-L tablets were remarkably higher than those of conventional tablets, which were consistent with the results of the in vitro dissolution. The relative bioavailability of SNE-L tablets and conventional tablets was approximately 200%. In conclusion, this combination method showed promise to improve the dissolution and oral bioavailability of oily drug vitamin K1.

A novel solid self-nanoemulsifying drug delivery system (S-SNEDDS) for improved stability and oral bioavailability of an oily drug, 1-palmitoyl-2-linoleoyl-3-acetyl-rac-glycerol

To develop a novel solid self-nanoemulsifying drug delivery system (S-SNEDDS) for a water-insoluble oily drug, 1-palmitoyl-2-linoleoyl-3-acetyl-rac-glycerol (PLAG) with improved stability and oral bioavailability, numerous S-SNEDDS were prepared with surfactant, hydrophilic polymer, antioxidant, and calcium silicate (porous carrier) using the spray-drying method. Their physicochemical properties were evaluated using emulsion droplet size analysis, SEM and PXRD. Moreover, the solubility, dissolution, stability, and pharmacokinetics of the selected S-SNEDDS were assessed compared with the drug and a commercial soft capsule. Sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) with the highest drug solubility were selected as surfactant and hydrophilic polymer, respectively. Among the antioxidants tested, only butylated hydroxyanisole (BHA) could completely protect the drug from oxidative degradation. The S-SNEDDS composed of PLAG/SLS/HPMC/BHA/calcium silicate at a weight ratio of 1: 0.25: 0.1: 0.0002: 0.5 provided an emulsion droplet size of less than 300 nm. In this S-SNEDDS, the drug and other ingredients might exist in the pores of carrier and attach onto its surface. It considerably improved the drug stability (about 100 vs. 70%, 60 °C for 5 d) and dissolution (about 80 vs. 20% in 60 min) compared to the commercial soft capsule. Moreover, the S-SNEDDS gave higher AUC, Cmax, and Tmax values than the commercial soft capsule; in particular, the former improved the oral bioavailability of PLAG by about 3-fold. Our results suggested that this S-SNEDDS provided excellent stability and oral bioavailability of PLAG. Thus, this S-SNEDDS would be recommended as a powerful oral drug delivery system for an oily drug, PLAG.

Dissolution enhancement of tadalafil by liquisolid technique

This study aimed to enhance the dissolution of tadalafil, a poorly water-soluble drug by applying liquisolid technique. The effects of two critical formulation variables, namely drug concentration (17.5% and 35%, w/w) and excipients ratio (10, 15 and 20) on dissolution rates were investigated. Pre-compression tests, including particle size distribution, flowability determination, Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), X-ray diffractometry (XRD) and scanning electron microscopy (SEM), were carried out to investigate the mechanism of dissolution enhancement. Tadalafil liquisolid tablets were prepared and their quality control tests, dissolution study, contact angle measurement, Raman mapping, and storage stability test were performed. The results suggested that all the liquisolid tablets exhibited significantly higher dissolution rates than the conventional tablets and pure tadalafil. FT-IR spectrum reflected no drug-excipient interactions. DSC and XRD studies indicated reduction in crystallinity of tadalafil, which was further confirmed by SEM and Raman mapping outcomes. The contact angle measurement demonstrated obvious increase in wetting property. Taken together, the reduction of particle size and crystallinity, and the improvement of wettability were the main mechanisms for the enhanced dissolution rate. No significant changes were observed in drug crystallinity and dissolution behavior after storage based on XRD, SEM and dissolution results.

Transparent computational intelligence models for pharmaceutical tableting process

Purpose

Pharmaceutical industry is tightly regulated owing to health concerns. Over the years, the use of computational intelligence (CI) tools has increased in pharmaceutical research and development, manufacturing, and quality control. Quality characteristics of tablets like tensile strength are important indicators of expected tablet performance. Predictive, yet transparent, CI models which can be analysed for insights into the formulation and development process.

Methods

This work uses data from a galenical tableting study and computational intelligence methods like decision trees, random forests, fuzzy systems, artificial neural networks, and symbolic regression to establish models for the outcome of tensile strength. Data was divided in training and test fold according to ten fold cross validation scheme and RMSE was used as an evaluation metric. Tree based ensembles and symbolic regression methods are presented as transparent models with extracted rules and mathematical formula, respectively, explaining the CI models in greater detail.

Results

CI models for tensile strength of tablets based on the formulation design and process parameters have been established. Best models exhibit normalized RMSE of 7 %. Rules from fuzzy systems and random forests are shown to increase transparency of CI models. A mathematical formula generated by symbolic regression is presented as a transparent model.

Conclusions

CI models explain the variation of tensile strength according to formulation and manufacturing process characteristics. CI models can be further analyzed to extract actionable knowledge making the artificial learning process more transparent and acceptable for use in pharmaceutical quality and safety domains.

Calcium Alginate-Neusilin US2 Nanocomposite Microbeads for Oral Sustained Drug Delivery of Poor Water Soluble Drug Aceclofenac Sodium

The aim of the present study was to formulate and investigate the calcium alginate- (CA-) Neusilin US2 nanocomposite microbeads containing preconcentrate of aceclofenac sodium (ACF-Na) liquid microemulsion (L-ME) for enhancement of oral bioavailability. The preconcentrate L-ME is prepared by using Labrafac PG, Labrasol, and Span 80 as oil, surfactant, and cosurfactant, respectively. The solid CA nanocomposite microbeads of L-ME prepared by microemulsification internal gelation technique using sodium alginate (SA) gelling agent, Neusilin US2 as adsorbent, and calcium chloride as crosslinking agent. L-ME has good thermodynamic stability; globule size was found to be 32.4 nm with polydispersity index 0.219 and -6.32 mV zeta potential. No significant interactions of excipients, drug in the formulations observed by FT-IR, DSC and XPRD. The concentration of SA and Neusilin US2 influences the flow properties, mean particle size, mechanical strength, drug entrapment efficiency, and percentage of drug release. All the formulations show minimum drug release in simulated gastric fluid (SGF) pH 1.2 for initial 2 h, maximum drug release in pH 6.8 phosphate buffer solution (PBS) at 6 h, followed by sustaining in simulated intestinal fluid (SIF) of pH 7.4 up to 12 h. The interaction of SA with Neusilin US2 creates a thick thixotropic gel network structure which acts as barrier to control the release of drug in the alkaline pH environment. Neusilin US2 is a novel filler used to convert L-ME into solid nanocomposite microbeads to enhance dissolution rate of poor water soluble drugs sustaining the drug release for prolonged period of time.

Self-microemulsifying drug delivery system (SMEDDS)--challenges and road ahead

Self-microemulsifying drug delivery system (SMEDDS) has emerged as a vital strategy to formulate poor water soluble compounds for bioavailability enhancement. However, certain limitations are associated with SMEDDS formulations which include in vivo drug precipitation, formulation handling issues, limited lymphatic uptake, lack of predictive in vitro tests and oxidation of unsaturated fatty acids. These limitations restrict their potential usage. Inclusion of polymers or precipitation inhibitors within lipid based formulations helps to maintain drug supersaturation after dispersion. This, thereby, improves the bioavailability and reduces the variability on exposure. Also, formulating solid SMEDDS helps to overcome liquid handling and stability problems. Usage of medium chain triglycerides (MCT) and suitable antioxidants to minimize oxidation of unsaturated fatty acids are few of the steps to overcome the limitations associated with SMEDDS. The review discussed here, in detail, the limitations of SMEDDS and suitable measures that can be taken to overcome them.

An emerging platform for drug delivery: aerogel based systems

Over the past few decades, advances in "aerogel science" have provoked an increasing interest for these materials in pharmaceutical sciences for drug delivery applications. Because of their high surface areas, high porosities and open pore structures which can be tuned and controlled by manipulation of synthesis conditions, nanostructured aerogels represent a promising class of materials for delivery of various drugs as well as enzymes and proteins. Along with biocompatible inorganic aerogels and biodegradable organic aerogels, more complex systems such as surface functionalized aerogels, composite aerogels and layered aerogels have also been under development and possess huge potential. Emphasis is given to the details of the aerogel synthesis and drug loading methods as well as the influence of synthesis parameters and loading methods on the adsorption and release of the drugs. Owing to their ability to increase the bioavailability of low solubility drugs, to improve both their stability and their release kinetics, there are an increasing number of research articles concerning aerogels in different drug delivery applications. This review presents an up to date overview of the advances in all kinds of aerogel based drug delivery systems which are currently under investigation.

Physicochemical properties and in vitro intestinal permeability properties and intestinal cell toxicity of silica particles, performed in simulated gastrointestinal fluids

BACKGROUND

Amorphous silica particles with the primary dimensions of a few tens of nm, have been widely applied as additives in various fields including medicine and food. Especially, they have been widely applied in powders for making tablets and to coat tablets. However, their behavior and biological effects in the gastrointestinal tracts associated with oral administration remains unknown.

METHODS

Amorphous silica particles with diameters of 50, 100, and 200nm were incubated in the fasted-state and fed-state simulated gastric and intestinal fluids. The sizes, intracellular transport into Caco-2 cells (model cells for intestinal absorption), the Caco-2 monolayer membrane permeability, and the cytotoxicity against Caco-2 cells were then evaluated for the silica particles.

RESULTS

Silica particles agglomerated in fed-state simultaneous intestinal fluids. The agglomeration and increased particles size inhibited the particles' absorption into the Caco-2 cells or particles' transport through the Caco-2 cells. The in vitro cytotoxicity of silica particles was not observed when the average size was larger than 100nm, independent of the fluid and the concentration.

CONCLUSION

Our study indicated the effect of diet on the agglomeration of silica particles. The sizes of silica particles affected the particles' absorption into or transport through the Caco-2 cells, and cytotoxicity in vitro, depending on the various biological fluids.

GENERAL SIGNIFICANCE

The findings obtained from our study may offer valuable information to evaluate the behavior of silica particles in the gastrointestinal tracts or safety of medicines or foods containing these materials as additives.

Development of Solid SEDDS, IV: Effect of Adsorbed Lipid and Surfactant on Tableting Properties and Surface Structures of Different Silicates

PURPOSE

To compare six commonly available silicates for their suitability to develop tablets by adsorbing components of liquid lipid-based drug delivery systems.

METHODS

The tabletability of Aerosil® 200, Sipernat® 22, Sylysia® 350, Zeopharm® 600, Neusilin® US2 and Neusilin® UFL2 were studied by compressing each silicate into tablets in the presence of 20% microcrystalline cellulose and measuring the tensile strength of tablets produced. Three components of lipid based formulations, namely, Capmul® MCM EP (glycerol monocaprylocaprate), Captex® 355 EP/NF (caprylic/capric triglycerides) and Cremophor® EL (PEG-35 castor oil), were adsorbed individually onto the silicates at 1:1 w/w, and the mixtures were then compressed into tablets. The SEM photomicrographs of neat silicates and their 1:1 w/w mixtures (also 1:2 and 1:3 for Neusilin® US2 and Neusilin® UFL2) with one of the liquids (Cremophor® EL) were recorded.

RESULTS

Neat Aerosil® 200, Sipernat® 22 and Sylysia® 350 were non-tabletable to the minimum acceptable tensile strength of 1 MPa, and they were also non-tabletable in presence of liquid. While Zeopharm® 600, Neusilin® US2 and Neusilin® UFL2 were tabletable without the addition of liquids, only Neusilin® US2 retained acceptable tabletability with 1:1 liquid. The SEM images of silicate-liquid mixtures indicated that, except for Neusilin® US2, much of the adsorbed liquid distributed primarily at the surface of particles rather than inside pores, which hindered their compaction into tablets.

CONCLUSION

Among the six silicates studied, Neusilin® US2 was the only silicate able to produce tablets with acceptable tensile strength in presence of a lipid component at 1:1 w/w ratio due to the fact that the liquid was mostly adsorbed into the pores of the silicate rather than at the surface.