Survival of Listeria monocytogenes in commercial cheese brines

Inactivation of Listeria monocytogenes by Hydrogen Peroxide Addition in Commercial Cheese Brines

Commercial cheese brines are used repeatedly over extended periods, potentially for years, and can be a reservoir for salt-tolerant pathogens, such as Listeria monocytogenes. The objective of this study was to determine the inactivation of L. monocytogenes in cheese brines treated with hydrogen peroxide (H2O2) (0, 50, and 100 ppm) at holding temperatures representing manufacturing conditions. In experiment one, four fresh cheese brines were prepared with 10 or 20% salt and pH 4.6 or 5.4 (2x2 design; duplicate trials). Brines were inoculated with L. monocytogenes, treated with H2O2, and stored at 10 and 15.6°C. For experiment two, seven used commercial brines (representing five cheese types, 15-30% NaCl, pH 4.5-5.5; three seasonal trials) were inoculated with L. monocytogenes or S. aureus, treated with H2O2, and stored at 12.8°C (both L. monocytogenes and S. aureus), 7.2 and 0°C (L. monocytogenes only). Each treatment was assayed on Days 0, 1, and 7 for microbial populations and residual H2O2. Data revealed that pathogen populations decreased ≤1 log in cheese brines with no hydrogen peroxide stored for 7 days, regardless of the storage temperature. In fresh brine treated with 50 or 100 ppm of H2O2, populations of L. monocytogenes were reduced to less than the detectable limit by 7 days at 10 and 15.6°C (>4 log reduction). For unfiltered used brines, H2O2 had no effect on L. monocytogenes populations in Brick J (pH 5.4, 15% NaCl) due to rapid inactivation of H2O2, likely by indigenous yeasts (∼3-log CFU/ml). For the remaining brines, the addition of 100 ppm H2O2 killed >4 log L. monocytogenes when stored at 7.2 or 12.8°C for 1 week, but only 3-4 log reduction when stored at 0°C. The addition of 50 ppm H2O2 had similar lethal effects at 12.8°C but was less effective at 7.2 or 0°C. Inactivation rates of S. aureus were similar to that of L. monocytogenes. This study confirmed that high salt, warmer temperature, and 100-ppm H2O2 accelerated the inactivation of L. monocytogenes in cheese brines. Data also suggest that the presence of catalase-positive indigenous microorganisms may neutralize the effect of H2O2.

Volatilome of brine-related microorganisms in a curd-based medium

The possible contribution of brine-derived microflora to the sensory attributes of cheese is still a rather unexplored field. In this study, 365 bacteria and 105 yeast strains isolated from 11 cheese brines were qualitatively tested for proteolytic and lipolytic activities, and positive strains were identified by sequencing. Among bacteria, Staphylococcus equorum was the most frequent, followed by Macrococcus caseolyticus and Corynebacterium flavescens. As for yeasts, Debaryomyces hansenii, Clavispora lusitaniae, and Torulaspora delbrueckii were most frequently identified. A total of 38% of bacteria and 59% of yeasts showed at least 1 of the metabolic activities tested, with lipolytic activity being the most widespread (81% of bacteria and 95% of yeasts). Subsequently 15 strains of bacteria and 10 yeasts were inoculated in a curd-based medium and assessed via headspace-solid phase microextraction coupled with gas chromatography-mass spectrometry to determine their volatilome. After a 30-d incubation at 12°C, most strains showed a viability increase of about 2 log cfu/mL, suggesting good adaptability to the cheese environment. A total of 26 compounds were detected in the headspace, carbonyl compounds and alcohols being the major contributors to the volatile profile of the curd-based medium. Multivariate analysis was carried out to elucidate the overall differences in volatiles produced by selected strains. Principal component analysis and hierarchical clustering analysis demonstrated that the brine-related microorganisms were separated into 3 different groups, suggesting their different abilities to produce volatile compounds. Some of the selected strains have been shown to have interesting aromatic potential and to possibly contribute to the sensory properties of cheese.

Isolation and characterization of halophilic Kocuria salsicia strains from cheese brine

Kocuria salsicia can survive in extreme environments and cause infections, including catheter-related bacteremia, in humans. Here, we investigated and evaluated the characteristics of nine K. salsicia strains (KS1–KS9) isolated from cheese brine from a farmstead cheese-manufacturing plant in Korea from June to December, 2020. Staphylococcus aureus American Type Culture Collection (ATCC) 29213 was used as a positive control in the growth curve analysis and biofilm-formation assays. All K. salsicia isolates showed growth at 15% salt concentration and temperatures of 15°C, 25°C, 30°C, 37°C, and 42°C. KS6 and KS8 showed growth at 5°C, suggesting that they are potential psychrotrophs. In the biofilm-formation analysis via crystal violet staining, KS6 exhibited the highest biofilm-forming ability at various temperatures and media [phosphate buffered saline, nutrient broth (NB), and NB containing 15% sodium chloride]. At 25°C and 30°C, KS3, KS6, and KS8 showed higher biofilm-forming ability than S. aureus ATCC 29213. The antimicrobial resistance of the isolates was evaluated using the VITEK^® 2 system; most isolates were resistant to marbofloxacin and nitrofurantoin (both 9/9, 100%), followed by enrofloxacin (7/9, 77.8%). Five of the nine isolates (5/9, 55.6%) showed multidrug resistance. Our study reports the abilities of K. salsicia to grow in the presence of high salt concentrations and at relatively low temperatures, along with its multidrug resistance and tendency to form biofilms.

Antilisterial Effect of a Natural Formulation Based on Citrus Extract in Ready-To-Eat Foods

Controlling Listeria in food is a major challenge, especially because it can persist for years in food processing plants. The best option to control this pathogen is the implementation of effective cleaning and disinfection procedures that guarantee the safety and quality of the final products. In addition, consumer trends are changing, being more aware of the importance of food safety and demanding natural foods, minimally processed and free of chemical additives. For this reason, the current consumption model is focusing on the development of preservatives of natural origin, from plants or microorganisms. In sum, this study aimed to evaluate the antimicrobial effectiveness of a citrus extract formulation rich in flavonoids against several L. monocytogenes and L. innocua strains, using in vitro test (agar diffusion test, minimum bactericidal concentration (MBC), and time-kill curves) and challenge test in food trials (carne mechada, salami, fresh salmon, lettuce, brine, and mozzarella cheese). The results presented in this work show that citrus extract, at doses of 5 and 10%, had a relevant antimicrobial activity in vitro against the target strains tested. Besides this, citrus extract applied on the surface of food had a significant antilisterial activity, mainly in carne mechada and mozzarella cheese, with reductions of up to eight logarithmic units with respect to the control. These results suggest that citrus extract can be considered a promising tool to improve the hygienic quality of ready-to-eat foods.

Cheese brines from Danish dairies reveal a complex microbiota comprising several halotolerant bacteria and yeasts

The Danish Danbo cheese is a surface ripened semi-hard cheese, which before ripening is submerged in brine for up to 24 h. The brining is required in order to obtain the structural and organoleptic properties of the cheeses. Likewise, the content of NaCl in the cheese will influence especially the surface microbiota being of significant importance for flavour development and prevention of microbial spoilage. Even though the microbiota on cheese surfaces have been studied extensively, limited knowledge is available on the occurrence of microorganisms in cheese brine. The aim of the present study was to investigate by both culture-dependent and -independent techniques the brine microbiota in four Danish dairies producing Danbo cheese. The pH of the brines varied from 5.1 to 5.6 with a dry matter content from 20 to 27% (w/w). The content of lactate varied from 4.1 to 10.8 g/L and free amino acids from 65 to 224 mg/L. Bacteria were isolated on five different media with NaCl contents of 0.85-23.0% (w/v) NaCl. The highest count of 6.3 log CFU/mL was obtained on TSA added 4% (w/v) NaCl. For yeasts, the highest count was 3.7 log CFU/mL on MYGP added 8% (w/v) NaCl. A total of 31 bacterial and eight eukaryotic species were isolated including several halotolerant and/or halophilic species. Among bacteria, counts of ≥6.0 log CFU/mL were obtained for Tetragenococcus muriaticus and Psychrobacter celer, while counts between ≥4.5 and < 6.0 log CFU/mL were obtained for Lactococcus lactis, Staphylococcus equorum, Staphylococcus hominis, Chromohalobacter beijerinckii, Chromohalobacter japonicus and Microbacterium maritypicum. Among yeasts, counts of ≥3.5 log CFU/mL were only obtained for Debaryomyces hansenii. By amplicon-based high-throughput sequencing of 16S rRNA gene and ITS2 regions for bacteria and eukaryotes respectively, brines from the same dairy clustered together indicating the uniqueness of the dairy brine microbiota. To a great extent the results obtained by amplicon sequencing fitted with the culture-dependent technique though each of the two methodologies identified unique genera/species. Dairy brine handling procedures as e.g. microfiltration were found to influence the brine microbiota. The current study proves the occurrence of a specific dairy brine microbiota including several halotolerant and/or halophilic species most likely of sea salt origin. The importance of these species during especially the initial stages of cheese ripening and their influence on cheese quality and safety need to be investigated. Likewise, optimised brine handling procedures and microbial cultures are required to ensure an optimal brine microbiota.

Effects of natural antimicrobials with modified atmosphere packaging on the growth kinetics of Listeria monocytogenes in ravioli at various temperatures

The objective of this study was to investigate the antimicrobial effects of cultured sugar/vinegar (CSV) blend and nisin to control the risk of Listeria monocytogenes in ready to cook (RTC) ravioli. Ravioli dough was prepared with 0.1, 0.3, 0.5, 1% CSV blend and 0.1, 0.2, and 0.3% nisin. Inoculated spinach or artichoke raviolis with 2.0 ± 0.5 log cfu/g of L. monocytogenes were packed aerobically or using modified atmosphere packaging (MAP), and then stored at 4, 10, 17, and 24 °C for 60 days. Growth kinetic parameters of the observed data fit well to the Baranyi equation. Ravioli with spinach filling materials yielded a higher risk than that with artichoke. L. monocytogenes was able to survive in ravioli with artichoke, but did not grow. The addition of 1% CSV blend or 0.3% nisin in spinach ravioli with the combination of MAP effectively controlled the growth of L. monocytogenes at the temperature below 10 °C. The organoleptic quality of spinach ravioli was not also affected by the application of 1% CSV blend. Therefore, the CSV blend can be recommended to improve the microbial safety and quality of natural RTC ravioli at retail market.

Practical applications

The risk of ravioli was affected by the filling materials of ravioli at retail market. Addition of 1% cultured sugar/vinegar blend in dough substantially contributes to the extension of shelf-life of MAP spinach raviolis. classification and regression tree analysis results indicate that refrigeration temperature is the main control factor to affect lag time and growth rate, while packaging method is critical for maximum population density.

Acidification of Model Cheese Brines To Control Listeria monocytogenes

Cheese brines are often used for prolonged periods, with adjustments made only to pH and salt content. Pathogens, including Salmonella enterica Typhimurium, Escherichia coli O157:H7, and Listeria monocytogenes, have been shown to survive long periods in model and commercial brines under common brining conditions. The objective of this study was to determine the survival of L. monocytogenes in model cheese brines, with and without whey added at 2%, when acidified to a pH of 2 using food-grade acids. Survival in untreated brines over a 6-month period was also assessed. Cultures of L. monocytogenes were propagated to induce salt and acid tolerance prior to inoculation at ∼6 log CFU/mL into model brines (pH 5.2, 20% NaCl). Following a week-long adaption period at 12°C, inoculated brines were acidified to pH 2.0 within 15 min using either hydrochloric, acetic, citric, or lactic acid, held at that pH for up to 24 h, and neutralized prior to enumeration and enrichment. Overall, each acid treatment was capable of achieving ≥5-log reductions in L. monocytogenes counts within 135 min at pH 2. Hydrochloric acid required the lowest volume to achieve treatment pH and was the most effective treatment in the absence of whey. However, it was the least effective in the presence of whey. Acetic acid produced rapid inactivation in both brines but required impractical volumes of acid to reach the treatment pH. Citric acid was similarly effective in both brines but was the second least effective in terms of time to achieve a ≥5-log reduction. Although only slight and insignificant differences were observed, lactic acid appears to be the more practical and promising approach for the inactivation of L. monocytogenes in cheese brines by producing the most rapid inactivation in the presence and absence of whey. Acidification as a preventive control for L. monocytogenes could increase adoption of brine treatments by small-scale cheese producers, thereby reducing food safety risks.

Diversity within Italian Cheesemaking Brine-Associated Bacterial Communities Evidenced by Massive Parallel 16S rRNA Gene Tag Sequencing

This study explored the bacterial diversity of brines used for cheesemaking in Italy, as well as their physicochemical characteristics. In this context, 19 brines used to salt soft, semi-hard, and hard Italian cheeses were collected in 14 commercial cheese plants and analyzed using a culture-independent amplicon sequencing approach in order to describe their bacterial microbiota. Large NaCl concentration variations were observed among the selected brines, with hard cheese brines exhibiting the highest values. Acidity values showed a great variability too, probably in relation to the brine use prior to sampling. Despite their high salt content, brine microbial loads ranged from 2.11 to 6.51 log CFU/mL for the total mesophilic count. Microbial community profiling assessed by 16S rRNA gene sequencing showed that these ecosystems were dominated by Firmicutes and Proteobacteria, followed by Actinobacteria and Bacteroidetes. Cheese type and brine salinity seem to be the main parameters accountable for brine microbial diversity. On the contrary, brine pH, acidity and protein concentration, correlated to cheese brine age, did not have any selective effect on the microbiota composition. Nine major genera were present in all analyzed brines, indicating that they might compose the core microbiome of cheese brines. Staphylococcus aureus was occasionally detected in brines using selective culture media. Interestingly, bacterial genera associated with a functional and technological use were frequently detected. Indeed Bifidobacteriaceae, which might be valuable probiotic candidates, and specific microbial genera such as Tetragenococcus, Corynebacterium and non-pathogenic Staphylococcus, which can contribute to sensorial properties of ripened cheeses, were widespread within brines.

Biofilm-producing ability of Listeria monocytogenes isolates from Brazilian cheese processing plants

The persistence of Listeria monocytogenes in food industry environments has been associated to the ability of specific isolates to produce biofilms. This study aimed to evaluate the biofilm production of 85 L. monocytogenes strains previously isolated from samples of cheese, brine and the environment of two cheese processing plants located in São Paulo, Brazil. The L. monocytogenes isolates belonged to serotypes 4b, 1/2b and 1/2c, yielded 30 different pulsotypes by pulsed-field gel electrophoresis (PFGE), and were submitted to biofilm-formation assays on polystyrene microplates and stainless steel coupons incubated statically at 35±0.5°C for 48h. All isolates from different sources showed ability to produce biofilms on polystyrene microplates, from which 21 (24.7%) also produced biofilms on stainless steel. Four isolates (4.7%) belonging to four different pulsotypes were classified as strong biofilms-producers on polystyrene microplates, while isolates belonging to four pulsotypes previously evaluated as persistent had weak or moderate ability to produce biofilms on polystyrene microplates. No relationship between the serotypes or pulsotypes and their biofilm-forming ability was observed. This study highlights the high variability in the biofilm production among L. monocytogenes strains collected from cheese and cheese-production environment, also indicating that strong biofilm-formation ability is not a key factor for persistence of specific isolates in cheese processing plants.

Use of used vs. fresh cheese brines and the effect of pH and salt concentration on the survival of Listeria monocytogenes

The aim of the study was to investigate how the use of fresh cheese brines compared with used brines and various combinations of pH and NaCl concentrations affected the survival of Listeria monocytogenes. Cheese brines from five Norwegian small scale cheese producers were analysed and showed great variations in pH (4·54–6·01) and NaCl concentrations (14·1–26·9 %). The survival of five strains of List. monocytogenes (two clinical isolates, two food isolates and one animal isolate) in four different cheese brines (three used and one fresh) was investigated. Results showed significant differences in survival both depending on the strains and the brines. Strains of human outbreak listeriosis cases showed greater ability to survive in the brines compared with food isolates and a List. monocytogenes reference strain (1–2 log10 difference after 200 d). All strains showed highest survival in the freshly prepared brine compared with the used brines. Molecular typing by multiple locus variable number tandem repeats analysis (MLVA) showed that there were no detectable alterations in the examined variable number tandem repeats of the genome in five strains after 200 d storage in any of the salt brines. Combined effects of pH (4·5, 5·25 and 6·0) and NaCl (15, 20 and 25 %) in fresh, filter sterilised brines on the survival of List. monocytogenes were examined and results showed that pathogen populations decreased over time in all brines. Death rates at any given NaCl concentration were highest at low pH (4·5) and death rates at any given pH were highest at low NaCl concentrations (15 %). In conclusion, the use of used brines reduced the survival of List. monocytogenes and a combination of low pH (4·5) and low salt concentrations (15 %) decreased the risk of List. monocytogenes survival compared with higher pH (5·25 or 6·0) and higher NaCl concentrations (20 or 25 %).

Listeria monocytogenes persistence in food-associated environments: epidemiology, strain characteristics, and implications for public health

Over the last 10 to 15 years, increasing evidence suggests that persistence of Listeria monocytogenes in food processing plants for years or even decades is an important factor in the transmission of this foodborne pathogen and the root cause of a number of human listeriosis outbreaks. L. monocytogenes persistence in other food-associated environments (e.g., farms and retail establishments) may also contribute to food contamination and transmission of the pathogen to humans. Although L. monocytogenes persistence is typically identified through isolation of a specific molecular subtype from samples collected in a given environment over time, formal (statistical) criteria for identification of persistence are undefined. Environmental factors (e.g., facilities and equipment that are difficult to clean) have been identified as key contributors to persistence; however, the mechanisms are less well understood. Although some researchers have reported that persistent strains possess specific characteristics that may facilitate persistence (e.g., biofilm formation and better adaptation to stress conditions), other researchers have not found significant differences between persistent and nonpersistent strains in the phenotypic characteristics that might facilitate persistence. This review includes a discussion of our current knowledge concerning some key issues associated with the persistence of L. monocytogenes, with special focus on (i) persistence in food processing plants and other food-associated environments, (ii) persistence in the general environment, (iii) phenotypic and genetic characteristics of persistent strains, (iv) niches, and (v) public health and economic implications of persistence. Although the available data clearly indicate that L. monocytogenes persistence at various stages of the food chain contributes to contamination of finished products, continued efforts to quantitatively integrate data on L. monocytogenes persistence (e.g., meta-analysis or quantitative microbial risk assessment) will be needed to advance our understanding of persistence of this pathogen and its economic and public health impacts.

Microbial background flora in small-scale cheese production facilities does not inhibit growth and surface attachment of Listeria monocytogenes

The background microbiota of 5 Norwegian small-scale cheese production sites was examined and the effect of the isolated strains on the growth and survival of Listeria monocytogenes was investigated. Samples were taken from the air, food contact surfaces (storage surfaces, cheese molds, and brine) and noncontact surfaces (floor, drains, and doors) and all isolates were identified by sequencing and morphology (mold). A total of 1,314 isolates were identified and found to belong to 55 bacterial genera, 1 species of yeast, and 6 species of mold. Lactococcus spp. (all of which were Lactococcus lactis), Staphylococcus spp., Microbacterium spp., and Psychrobacter sp. were isolated from all 5 sites and Rhodococcus spp. and Chryseobacterium spp. from 4 sites. Thirty-two genera were only found in 1 out of 5 facilities each. Great variations were observed in the microbial background flora both between the 5 producers, and also within the various production sites. The greatest diversity of bacteria was found in drains and on rubber seals of doors. The flora on cheese storage shelves and in salt brines was less varied. A total of 62 bacterial isolates and 1 yeast isolate were tested for antilisterial activity in an overlay assay and a spot-on-lawn assay, but none showed significant inhibitory effects. Listeria monocytogenes was also co-cultured on ceramic tiles with bacteria dominating in the cheese production plants: Lactococcus lactis, Pseudomonas putida, Staphylococcus equorum, Rhodococcus spp., or Psychrobacter spp. None of the tested isolates altered the survival of L. monocytogenes on ceramic tiles. The conclusion of the study was that no common background flora exists in cheese production environments. None of the tested isolates inhibited the growth of L. monocytogenes. Hence, this study does not support the hypothesis that the natural background flora in cheese production environments inhibits the growth or survival of L. monocytogenes.

Comparison of sampling procedures for recovery of Listeria monocytogenes from stainless steel food contact surfaces

A number of techniques exist for microbiological sampling of food processing environments in food industries. In the present study the efficacies of nine sampling procedures for the recovery of Listeria monocytogenes from food contact surfaces, including a new sampling device consisting of a miniroller, were evaluated and compared. A stainless steel table was inoculated with L. monocytogenes strain 935 (serovar 4b, human origin) and L. monocytogenes strain 437/07 (serovar 1/2b, food origin), at 10(5) CFU/100 cm(2). L. monocytogenes strain 935 was best recovered with the minirollers (recovery of up to 6.27%), while poor recoveries (<0.30%) were obtained with the towel (one-ply composite tissue), alginate swab, metallic swab, and Petrifilm methods. In the case of L. monocytogenes strain 437/07 the replicate organism detection and counting (RODAC) ALOA contact plates yielded the best recoveries (4.15%), followed by the minirollers (up to 1.52%). Overall, recovery percentages with the minirollers were higher with stomacher homogenization than with Vibromatic agitation. The recovery percentages obtained for the Listeria strain of human origin were higher than those obtained with the food strain for all sampling procedures except Petrifilm and RODAC ALOA. With the miniroller device coated with wool fiber, the recovery of L. monocytogenes can be improved from 2 to 17 times over recoveries obtained with the sponge and cotton swab. This is the first report of a miniroller device for microbiological sampling in the available literature. The novel sampling procedure is convenient to apply on surfaces, is cost-effective, and results in better recovery of L. monocytogenes than do the conventional methods.

Survival of Listeria monocytogenes introduced as a post-aging contaminant during storage of low-salt Cheddar cheese at 4, 10, and 21°C

Traditional aged Cheddar cheese does not support Listeria monocytogenes growth and, in fact, gradual inactivation of the organism occurs during storage due to intrinsic characteristics of Cheddar cheese, such as presence of starter cultures, salt content, and acidity. However, consuming high-salt (sodium) levels is a health concern and the dairy industry is responding by creating reduced-salt cheeses. The microbiological stability of low-salt cheese has not been well documented. This study examined the survival of L. monocytogenes in low-salt compared with regular-salt Cheddar cheese at 2 pH levels stored at 4, 10, and 21°C. Cheddar cheeses were formulated at 0.7% and 1.8% NaCl (wt/wt) with both low and high pH and aged for 10 wk, resulting in 4 treatments: 0.7% NaCl and pH 5.1 (low salt and low pH); 0.7% NaCl and pH 5.5 (low salt and high pH); 1.8% NaCl and pH 5.8 (standard salt and high pH); and 1.8% NaCl and pH 5.3 (standard salt and low pH). Each treatment was comminuted and inoculated with a 5-strain cocktail of L. monocytogenes at a target level of 3.5 log cfu/g, then divided and incubated at 4, 10, and 21°C. Survival or growth of L. monocytogenes was monitored for up to 90, 90, and 30 d, respectively. Listeria monocytogenes decreased by 0.14 to 1.48 log cfu/g in all treatments. At the end of incubation at a given temperature, no significant difference existed in L. monocytogenes survival between the low and standard salt treatments at either low or high pH. Listeria monocytogenes counts decreased gradually regardless of a continuous increase in pH (end pH of 5.3 to 6.9) of low-salt treatments at all study temperatures. This study demonstrated that post-aging inoculation of L. monocytogenes into low-salt (0.7%, wt/wt) Cheddar cheeses at an initial pH of 5.1 to 5.5 does not support growth at 4, 10, and 21°C up to 90, 90, and 30 d, respectively. As none of the treatments demonstrated more than a 1.5 log reduction in L. monocytogenes counts, the need for good sanitation practices to prevent post-manufacturing cross contamination remains.

Incidence of Listeria monocytogenes in cheese manufacturing plants from the northeast region of São Paulo, Brazil

The incidence of Listeria monocytogenes in three cheese manufacturing plants from the northeastern region of São Paulo, Brazil, was evaluated from October 2008 to September 2009. L. monocytogenes was found in samples from two plants, at percentages of 13.3% (n = 128) and 9.6% (n = 114). Samples of raw and pasteurized milk, water, and Minas Frescal cheese were negative for L. monocytogenes, although the pathogen was isolated from the surface of Prato cheese and in brine from one of the plants evaluated. L. monocytogenes was also isolated from different sites of the facilities, mainly in non-food contact surfaces such as drains, floors, and platforms. Serotype 4b was the most predominant in the plants studied. The results of this study indicate the need for control strategies to prevent the dispersion of L. monocytogenes in the environment of cheese manufacturing plants.

Efficacy of chlorine dioxide against Listeria monocytogenes in brine chilling solutions

Chilled brine solutions are used by the food industry to rapidly cool ready-to-eat meat products after cooking and before packaging. Chlorine dioxide (ClO(2)) was investigated as an antimicrobial additive to eliminate Listeria monocytogenes. Several experiments were performed using brine solutions made of sodium chloride (NaCl) and calcium chloride (CaCl(2)) inoculated with L. monocytogenes and/or treated with 3 ppm of ClO(2). First, 10 and 20% CaCl(2) and NaCl solutions (pH 7.0) were inoculated with a five-strain cocktail of L. monocytogenes to obtain approximately 7 log CFU/ml and incubated 8 h at 0 degrees C. The results demonstrated that L. monocytogenes survived in 10% CaCl(2), 10 and 20% NaCl, and pure water. L. monocytogenes levels were reduced approximately 1.2 log CFU/ml in 20% CaCl(2). Second, inoculated ( approximately 7 log CFU/ml) brine solutions (10 and 20% NaCl and 10% CaCl(2)) treated with 3 ppm of ClO(2) resulted in a approximately 4-log reduction of the pathogen within 90 s. The same was not observed in a solution of 20% CaCl(2); further investigation demonstrated that high levels of divalent cations interfere with the disinfectant. Spent brine solutions from hot dog and ham chilling were treated with ClO(2) at concentrations of 3 or 30 ppm. At these concentrations, ClO(2) did not reduce L. monocytogenes. Removal of divalent cations and organic material in brine solutions prior to disinfection with ClO(2) should be investigated to improve the efficacy of the compound against L. monocytogenes. The information from this study may be useful to processing establishments and researchers who are investigating antimicrobials in chilling brine solutions.

Detection and Characterization of Listeria monocytogenes in São Jorge (Portugal) Cheese Production

Listeria monocytogenes is a foodborne pathogen that can cause serious invasive disease in humans. Because human listeriosis cases have previously been linked to consumption of contaminated cheese, control of this pathogen throughout the cheese production chain is of particular concern. To understand the potential for L. monocytogenes transmission via São Jorge cheese, a Portuguese artisanal cheese variety that bears a Protected Denomination of Origin classification, 357 raw milk, curd, natural whey starter, and cheese samples representative of the production chain of this cheese were collected over one year and tested for the presence of L. monocytogenes and selected physicochemical parameters. Although neither L. monocytogenes nor other Listeria spp. were detected in whey, curd, or cheese samples, 2 of the 105 raw milk samples analyzed were positive for L. monocytogenes. These 2 raw milk isolates represented a ribotype that has previously been linked to multiple human listeriosis outbreaks and cases elsewhere, indicating the potential of these isolates to cause human listeriosis. On average, physicochemical parameters of São Jorge cheese ripened for 4 mo presented values that likely minimize the risk of L. monocytogenes outgrowth during ripening and storage (mean pH = 5.48; mean moisture = 37.79%; mean NaCl concentration = 4.73%). However, some cheese samples evaluated in this study were characterized by physicochemical parameters that may allow growth and survival of L. monocytogenes. Even though our results indicate that raw milk used for São Jorge cheese manufacture as well as finished products is rarely contaminated with L. monocytogenes, continued efforts to control the presence of this pathogen in the São Jorge cheese production chain are urged and are critical to ensure the safety of this product.

Stress response of Listeria monocytogenes isolated from cheese and other foods

The responses to pH and sodium chloride of four strains of Listeria monocytogenes isolated from Portuguese cheese, with a sodium chloride concentration of about 2% (w/v) and a pH value from 5.1 to 6.2, were studied. Two isolates from meat and two clinical isolates related to food-borne listeriosis, in which the implicated food product had about 2-3.5% (w/v) sodium chloride, also were studied. The effect of temperature on pH and sodium chloride sensitivity was also determined. The results show that natural isolates vary in response to these stresses and the data were often at variance with previously published data. Strains varied in sensitivity to low pH and to high sodium chloride concentration but the cheese isolates tended to be more resistant. A lower temperature was associated with a decrease in resistance to low pH and to sodium chloride. All strains showed an acid tolerance response induction when grown at pH 5.5 and although the time required for maximum induction of the response varied between strains, 2 h of acid adaptation, at least, was necessary which is longer than previously reported. Some strains showed an osmotolerance response after incubation in 3.5% (w/v) sodium chloride. Osmoadaptation, in addition to inducing an osmotolerance response, also induced cross-protection against acid shock conditions (pH 3.5). The acid tolerance response also induced a cross-protection against osmotic shock conditions (20% (w/v) sodium chloride). In some cases there was a relationship between the degree of resistance and adaptation, but usually the behaviour of a particular strain was independent of the conditions from which it was isolated.

Laboratory-scale preparation of soft cheese artificially contaminated with low levels of Escherichia coli O157, Listeria monocytogenes, and Salmonella enterica serovars Typhimurium, Enteritidis, and Dublin

The production of cheese with incurred low levels of pathogenic microorganisms stressed by the production process was the aim of the study. A standard protocol for the preparation of artificially contaminated soft cheese on a laboratory scale was developed. Milk for cheese preparation was artificially contaminated with pathogenic target microorganisms at low levels, between 1 and 10 CFU/ml. Two strains of Escherichia coli OI157:H7, two strains of Listeria monocytogenes, and three Salmonella spp. (Salmonella enterica serovars Typhimurium, Enteritidis, and Dublin) were investigated. The food pathogens in the cheese were exposed to the entire production process. All three microorganism species survived the cheese production process and were detected in the final product at concentrations between 1 and 50 CFU/g. The cheese produced contains target microorganisms that have been exposed to curd formation, drainage, setting, and ripening. This cheese can be used to validate microbiological methods or to examine the target microorganisms in a natural food environment at low concentrations. It represents an alternative to artificial contamination of cheese by adding target microorganisms to a final cheese product.

Effect of various environmental parameters on the recovery of sublethally salt-damaged and acid-damaged Listeria monocytogenes

The influence of supplementing the culture medium with magnesium sulphate, D-glucose, L-cysteine, catalase or lithium chloride, of incubation temperature and of oxygen availability on the recovery of salt- or acid-damaged Listeria monocytogenes, was studied on a solid repair medium according to a Hadamard matrix, with seven parameters varying between a high and a low level. The most important factors for repair of stressed Listeria were further studied with complete factorial design experiments. Results show that conditions promoting resuscitation of acid- or salt-injured cells are stress-specific, and differ in part from those described in the literature for heat-stressed Listeria.

Survival of Salmonella typhimurium and Escherichia coli O157:H7 in cheese brines

Survival of Salmonella typhimurium and Escherichia coli O157:H7 was studied in model brines and brine from three cheese plants. Three strain mixtures of S. typhimurium and E. coli O157:H7 (10(6) CFU/ml) were inoculated separately into 23% model brine with or without added pasteurized whey (2%) and as a combined inoculum into the commercial brines. The model brines were incubated at 8 and 15 degrees C for 28 days, and the commercial brines at 4 and 13 degrees C for 35 days. Populations of both pathogens in the model brine + whey decreased slowly over 28 days (1.0-2.0 log CFU/ml) with greater survival at 8 degrees C than at 15 degrees C. Corresponding decreases in model brine without whey were 1.9-3.0 log CFU/ml, with greater survival at 8 degrees C than at 15 degrees C. Both S. typhimurium and E. coli O157:H7 survived significantly better (P < 0.05) at 4 degrees C than at 13 degrees C in two of the commercial brines. The survival of each pathogen in the commercial brines at 13 degrees C was significantly influenced by brine pH. Both pathogen populations decreased most rapidly in commercial brines during the first week of storage (2.5-4.0 and 2.3-2.8 log CFU/ml for S. typhimurium and E. coli O157:H7, respectively) with significant recovery (ca. 0.5 log CFU/ml increase) often occurring in the second week of storage. Counts changed little thereafter. Overall, E. coli O157:H7 survived better than S. typhimurium, with differences of 0.1-1.2 log CFU/ml between the two pathogens. Results of this study show that cheese brine could support the survival of contaminating S. typhimurium and E. coli O157:H7 for several weeks under typical brining conditions.