Rapid detection of Pseudomonas aeruginosa and Acinetobacter baumannii Harboring bla(VIM-2), bla(IMP-1) and bla(OXA-23) genes by using loop-mediated isothermal amplification methods

On-Site Dual Detection of Airborne Acinetobacter baumannii and Its Carbapenem-Resistant Gene blaOXA-23 Using a One-Pot Visual LAMP-CRISPR/Cas12a-Based Platform

Acinetobacter baumannii (A. baumannii), a very common pathogen, poses a significant public health threat due to its antibiotic resistance and long survival in healthcare environments. Both A. baumannii and carbapenem-resistant A. baumannii (CRAB) can spread through the air, increasing infection risks. Therefore, monitoring their presence in the air is of great significance, especially in hospitals. Herein, we developed a Chelex-100-LAMP-CRISPR/Cas12a (CLC) platform including DNA release and nucleic acid test. Combined with a wet cyclone sampler, the platform can detect airborne A. baumannii and its most common carbapenem-resistant gene, blaOXA-23, within 70 min. This CLC platform has also been proven to have a detection limit of 6 × 102 CFU of CRAB per test through simulated air samples. Moreover, this platform was also used to test five actual air samples from a tertiary hospital, and the results achieved perfect concordance with sequencing data, validating the platform's accuracy and reliability. Therefore, the CLC platform showed great potential for the rapid, on-site detection of airborne A. baumannii and its carbapenem-resistant gene blaOXA-23, offering a valuable tool for infection control in healthcare environments.

Isolation and characterization of DNA aptamers against the HlyE antigen of Salmonella Typhi

Aptamers have emerged as prominent ligands in clinical diagnostics because they provide various advantages over antibodies, such as quicker generation time, reduced manufacturing costs, minimal batch-to-batch variability, greater modifiability, and improved thermal stability. In the present study, we isolated and characterized DNA aptamers that can specifically bind to the hemolysin E (HlyE) antigen of Salmonella Typhi for future development of typhoid diagnostic tests. The DNA aptamers against Salmonella Typhi HlyE were isolated using systematic evolution of ligands by exponential enrichment (SELEX), and their binding affinity and specificity were assessed utilizing enzyme-linked oligonucleotide assay (ELONA). A total of 11 distinct aptamers were identified, and the binding affinities and species selectivities of the three most probable aptamers were determined. Kd values were obtained in the nanomolar range, with the highest affinity of 83.6 nM determined for AptHlyE97. In addition, AptHlyE11, AptHlyE45 and AptHlyE97 clearly distinguished S. Typhi HlyE from other tested bacteria, such as Salmonella Paratyphi A, Salmonella Paratyphi B, Shigella flexneri, Klebsiella pneumonia and Escherichia coli, therefore displaying desirable specificity. These novel aptamers could be used as diagnostic ligands for the future development of inexpensive and effective point-of-care tests for typhoid surveillance, especially in developing countries of the tropics and subtropics.

Colorimetric Loop-Mediated Isothermal Amplification Assays Accurately Detect blaOXA-23-like and ISAba1 Genes from Acinetobacter baumannii in Pure Cultures and Spiked Human Sera

Carbapenem resistance in Acinetobacter baumannii is a critical global health threat attributed to transferrable carbapenemase genes. Carbapenemase genotyping using polymerase chain reaction (PCR) presents a challenge in resource-limited settings because of its technical requirements. This study designed new loop-mediated isothermal amplification (LAMP) primers using multiple sequence alignment-based workflows, validated the primer performance against multiple target variants in silico, and developed novel LAMP assays (LAntRN-OXA23 and LAntRN-ISAba1) to detect the transferable blaOXA-23-like carbapenemase genes and ISAba1 elements in pure cultures and A. baumannii-spiked serum samples. The designed LAMP primers bind to the conserved regions of their highly polymorphic targets, with their in silico performance comparable with other published primers. The in vitro LAMP assays (using 30 PCR-profiled A. baumannii and 10 standard multidrug-resistant gram-negative isolates) have 100% concordance with the PCR-positive clinical samples, limits of detection as low as 1 pg/µL (200 copies/µL), and specificities of 57.89-100%. Both assays produced positive results when testing DNA samples (extracted using a commercial kit) from blaOXA-23-like and ISAba1-blaOXA-51-like PCR-positive A. baumannii-spiked normal human sera (five set-ups per target). In summary, the LAMP assays accurately detected the target genes and have applications in infection management, control, and point-of-care testing in resource-limited healthcare settings.

Isothermal Amplification and Hypersensitive Fluorescence Dual-Enhancement Nucleic Acid Lateral Flow Assay for Rapid Detection of Acinetobacter baumannii and Its Drug Resistance

Acinetobacter baumannii (A. baumannii) is among the main pathogens that cause nosocomial infections. The ability to rapidly and accurately detect A. baumannii and its drug resistance is essential for blocking secondary infections and guiding treatments. In this study, we reported a nucleic acid fluorescent lateral flow assay (NFLFA) to identify A. baumannii and carbapenem-resistant A. baumannii (CRAB) in a rapid and quantitative manner by integrating loop-mediated isothermal amplification (LAMP) and silica-based multilayered quantum dot nanobead tag (Si@MQB). First, a rapid LAMP system was established and optimised to support the effective amplification of two bacterial genes in 35 min. Then, the antibody-modified Si@MQB was introduced to capture the two kinds of amplified DNA sequences and simultaneously detect them on two test lines of a LFA strip, which greatly improved the detection sensitivity and stability of the commonly used AuNP-based nucleic acid LFA. With these strategies, the established LAMP-NFLFA achieved detection limits of 199 CFU/mL and 287 CFU/mL for the RecA (house-keeping gene) and blaOXA-23 (drug resistance gene) genes, respectively, within 43 min. Furthermore, the assay exhibited good repeatability and specificity for detecting target pathogens in real complex specimens and environments; thus, the proposed assay undoubtedly provides a promising and low-cost tool for the on-site monitoring of nosocomial infections.

Development of Loop-Mediated Isothermal Amplification Rapid Diagnostic Assays for the Detection of Klebsiella pneumoniae and Carbapenemase Genes in Clinical Samples

Klebsiella pneumoniae is an important pathogenic bacterium commonly associated with human healthcare and community-acquired infections. In recent years, K. pneumoniae has become a significant threat to global public and veterinary health, because of its high rates of antimicrobial resistance (AMR). Early diagnosis of K. pneumoniae infection and detection of any associated AMR would help to accelerate directed therapy and reduce the risk of the emergence of multidrug-resistant isolates. In this study, we identified three target genes (yhaI, epsL, and xcpW) common to K. pneumoniae isolates from both China and Europe and designed loop-mediated isothermal amplification (LAMP) assays for the detection of K. pneumoniae in clinical samples. We also designed LAMP assays for the detection of five AMR genes commonly associated with K. pneumoniae. The LAMP assays were validated on a total of 319 type reference strains and clinical isolates of diverse genetic backgrounds, in addition to 40 clinical human sputum samples, and were shown to be reliable, highly specific, and sensitive. For the K. pneumoniae-specific LAMP assay, the calculated sensitivity, specificity, and positive and negative predictive values (comparison with culture and matrix-assisted laser desorption/ionization-time of flight mass spectrometry) were all 100% on clinical isolates and, respectively, of 100%, 91%, and 90%, and 100% when tested on clinical sputum samples, while being significantly faster than the reference methods. For the bla KPC and other carbapenemases' LAMP assays, the concordance between the LAMP results and the references methods (susceptibility tests) was 100%, on both pure cultures (n = 125) and clinical samples (n = 18). In conclusion, we developed highly sensitive and specific LAMP assays for the clinical identification of K. pneumoniae and detection of carbapenem resistance.

A Loop-mediated Isothermal Amplification With a Nanoparticle-Based Lateral Flow Biosensor Assay to Detect Pseudomonas aeruginosa in Endophthalmitis

Purpose

Pseudomonas aeruginosa is the most common bacteria causing endophthalmitis after cataract surgery. Vitreous fluid culture and molecular studies are commonly used in clinical diagnoses, but have disadvantages, such as a long culture cycle and low detection sensitivity. Here, we report a loop-mediated isothermal amplification (LAMP) method combined with the nanoparticles-lateral flow biosensor (LFB) method for rapid and specific detection of P. aeruginosa.

Methods

A set of six primers was designed to target the OprL gene of P. aeruginosa. Genomic DNA extracted from several gram-negative and gram-positive bacteria was used to determine the sensitivity and specificity of the analysis. LAMP reactions were conducted at 65 °C for 50 minutes, and results were reported using the LFB method.

Results

The DNA template of P. aeruginosa was specifically recognized by the P. aeruginosa-LAMP-LFB (PA-LAMP-LFB) method as no cross reactions were observed for non–P. aeruginosa templates. The analytical sensitivity of our assay was 100 fg per test for the pure cultured DNA template, and the result obtained using the LFB was consistent with that of colorimetric indicator detection. The whole test could be completed within 1h. This method was used to detect P. aeruginosa, Staphylococcus aureus, and Klebsiella pneumoniae; only P. aeruginosa was positive. The positive rates of P. aeruginosa detected by a traditional culture method, the LAMP-LFB method, and the fluorescence quantitative polymerase chain reaction method were 17.7%, 17.7%, and 13.3%, respectively.

Conclusions

The P. aeruginosa-LAMP-LFB method established here is a rapid, specific, and sensitive method for the detection of P. aeruginosa, which can be widely used.

Characteristics of Isolates of Pseudomonas aeruginosa and Serratia marcescens Associated With Post-harvest Fuzi (Aconitum carmichaelii) Rot and Their Novel Loop-Mediated Isothermal Amplification Detection Methods

Fuzi (the lateral root of Aconitum carmichaelii Debx.) is a traditional Chinese medicine that is cultivated in more than eight provinces in China. However, it can be easily devastated by post-harvest rot, causing huge losses. Therefore, it is extremely important that the primary causal pathogens of post-harvest Fuzi rot are identified and appropriate detection methods for them are developed to prevent and control losses. In this study, two bacterial strains (X1 and X2) were isolated from rotten post-harvest Fuzi. Based on their morphological, physiological, and biochemical characteristics, housekeeping gene homologies, and matrix-assisted laser desorption ionization/time-of-flight mass spectrometry (MALDI-TOF MS) results, these isolates were identified as Pseudomonas aeruginosa and Serratia marcescens. The pathogenicities of these isolates were confirmed by fulfilling Koch's postulates demonstrating that they were post-harvest Fuzi rot pathogens. Two loop-mediated isothermal amplification (LAMP) methods targeting the gyrase B subunit (gyrB) gene of P. aeruginosa and the phosphatidylinositol glycan C (pigC) gene of S. marcescens were successfully developed, and it was found that the target genes were highly specific to the two pathogens. These LAMP methods were used to detect P. aeruginosa and S. marcescens in 46 naturally occurring Fuzi and their associated rhizosphere soil samples of unknown etiology. The two bacterial assays were positive in some healthy and rotten samples and could be accomplished within 1 h at 65°C without the need for complicated, expensive instruments. To our knowledge, this is the first report of P. aeruginosa and S. marcescens causing post-harvest Fuzi rot. The newly developed methods are expected to have applications in point-of-care testing for the two pathogens under different Fuzi planting procedures and will significantly contribute to the control and prevention of Fuzi rot.

Design of Rapid Detection System for Five Major Carbapenemase Families (bla KPC, bla NDM, bla VIM, bla IMP and bla OXA-48-Like) by Colorimetric Loop-Mediated Isothermal Amplification

Purpose

Carbapenemase-producing Enterobacteriaceae (CPE) infection constitutes a public health threat. Timely and efficient diagnosis is of paramount importance for prompt and effective therapy. In order to quickly and comprehensively detect the five major families of carbapenemases (bla_KPC, bla_NDM, bla_VIM, bla_IMP, and bla_OXA-48-like), colorimetric loop-mediated isothermal amplification (LAMP) was employed.

Materials and Methods

Five sets of LAMP primers were designed, each of which can, respectively, amplify all the carbapenemase subtypes described in this work. Twenty whole genome sequencing-verified-“standard strains”, including 1 bla_NDM-1, 1 bla_NDM-5, 1 bla_NDM-6, 1 bla_NDM-7, 2 bla_IMP-4, 1 bla_IMP-8, 2 bla_KPC-2, 1 bla_KPC-3, 1 bla_KPC-4, 1 bla_KPC-5, 1 bla_KPC-6, 1 bla_KPC-7, 1 bla_OXA-48 and 1 bla_OXA-181 carrier, and 1 bla_VIM and bla_OXA-244, 1 bla_KPC-2 and bla_IMP-4, 1 bla_KPC-2 and bla_VIM-1 and 1 bla_KPC-2 and bla_NDM-1-co-carriers, were used to establish a 25-microliter visual LAMP reaction system (kept at 65°C for 30 minutes in water bath). Color change from bright pink to yellow indicated positive amplification. In addition, 126 pre-verified clinical carbapenem-resistant Enterobacteriaceae (CRE) isolates, including 65 CPE (23 bla_NDM, 2 bla_OXA-48-like, 1 bla_KPC and bla_VIM, 2 bla_IMP, and 37 bla_KPC carriers) and 61 non-CPE, were also detected.

Results

With the lowest detection limit of 10 colony forming units (CFU) per reaction for LAMP and 10³ CFU per reaction for PCR, the LAMP system demonstrated dramatically higher sensitivity while retaining the same specificity. Furthermore, we demonstrated concordant results between the two methods for the 126 clinical isolates.

Conclusion

Therefore, LAMP could be used for rapid identification of the five major carbapenemase gene families in routine clinical laboratories.

Identification of Acinetobacter baumannii and its carbapenem-resistant gene blaOXA-23-like by multiple cross displacement amplification combined with lateral flow biosensor

Acinetobacter baumannii is a frequent cause of the nosocomial infections. Herein, a novel isothermal amplification technique, multiple cross displacement amplification (MCDA) is employed for detecting all A. baumannii strains and identifying the strains harboring bla_OXA-23-like gene. The duplex MCDA assay, which targets the pgaD and bla_OXA-23-like genes, could identify the A. baumannii isolates and differentiate these isolates harboring bla_OXA-23-like gene. The disposable lateral flow biosensors (LFB) were used for analyzing the MCDA products. A total of sixty-eight isolates, include fifty-three A. baumannii strains and fifteen non-A. baumannii strains, were employed to optimize MCDA methods and determine the sensitivity, specificity and feasibility. The optimal reaction condition is found to be 63 °C within 1 h, with limit of detection at 100 fg templates per tube for pgaD and bla_OXA-23-like genes in pure cultures. The specificity of this assay is 100%. Moreover, the practical application of the duplex MCDA-LFB assay was evaluated using clinical samples, and the results obtained from duplex MCDA-LFB method were consistent with conventional culture-based technique. In sum, the duplex MCDA-LFB assay appears to be a reliable, rapid and specific technique to detect all A. baumannii strains and identify these strains harboring bla_OXA-23-like gene for appropriate antibiotic therapy.

Rapid molecular detection of macrolide resistance

BACKGROUND

Emerging antimicrobial resistance is a significant threat to human health. However, methods for rapidly diagnosing antimicrobial resistance generally require multi-day culture-based assays. Macrolide efflux gene A, mef(A), provides resistance against erythromycin and azithromycin and is known to be laterally transferred among a wide range of bacterial species.

METHODS

We use Recombinase Polymerase Assay (RPA) to detect the antimicrobial resistance gene mef(A) from raw lysates without nucleic acid purification. To validate these results we performed broth dilution assays to assess antimicrobial resistance to erythromycin and ampicillin (a negative control).

RESULTS

We validate the detection of mef(A) in raw lysates of Streptococcus pyogenes, S. pneumoniae, S. salivarius, and Enterococcus faecium bacterial lysates within 7-10 min of assay time. We show that detection of mef(A) accurately predicts real antimicrobial resistance assessed by traditional culture methods, and that the assay is robust to high levels of spiked-in non-specific nucleic acid contaminant. The assay was unaffected by single-nucleotide polymorphisms within divergent mef(A) gene sequences, strengthening its utility as a robust diagnostic tool.

CONCLUSIONS

This finding opens the door to implementation of rapid genomic diagnostics in a clinical setting, while providing researchers a rapid, cost-effective tool to track antibiotic resistance in both pathogens and commensal strains.

Aptamer-mediated colorimetric and electrochemical detection of Pseudomonas aeruginosa utilizing peroxidase-mimic activity of gold NanoZyme

Despite of various advancements in biosensing, a rapid, accurate, and on-site detection of a bacterial pathogen is a real challenge due to the lack of appropriate diagnostic platforms. To address this unmet need, we herein report an aptamer-mediated tunable NanoZyme sensor for the detection of Pseudomonas aeruginosa, an infectious bacterial pathogen. Our approach exploits the inherent peroxidase-like NanoZyme activity of gold nanoparticles (GNPs) in combination with high affinity and specificity of a Pseudomonas aeruginosa-specific aptamer (F23). The presence of aptamer inhibits the inherent peroxidase-like activity of GNPs by simple adsorption on to the surface of GNPs. However, in the presence of cognate target (P. aeruginosa), owing to the high affinity for P. aeruginosa, the aptamer leaves the GNP surface, allowing GNPs to resume their peroxidase-like activity, resulting in oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). As TMB is an electrochemically active species, we have been able to translate the NanoZyme-based method into an ultrasensitive electrochemical assay using disposable carbon screen-printed electrode. This approach is highly sensitive and allows us to rapidly detect P. aeruginosa with a low-end detection limit of ~ 60 CFU/mL in water within 10 min. This generic aptamer-NanoZyme-based electrochemical sensing strategy may, in principle, be applicable for the detection of various other bacterial pathogens.

Isothermal amplification and rapid detection of Klebsiella pneumoniae based on the multiple cross displacement amplification (MCDA) and gold nanoparticle lateral flow biosensor (LFB)

Klebsiella pneumoniae (K. pneumoniae) is a frequent pathogen causing nosocomial infections and outbreaks. We developed a multiple cross displacement amplification (MCDA) assay for the detection of K. pneumoniae, which can get the positive results within 40 minutes’ isothermal amplification. Gold-nanoparticle lateral flow biosensor (LFB) and colorimetric indicators were used for the rapid readouts of MCDA amplification. The detection limit of this assay was 100 fg per reaction at 65°C, which was confirmed to be the optimal amplification temperature according to the real time turbidimeters. For specificity, all of the 30 clinical-source K. pneumoniae strains were positive for the MCDA, and all of the non-K. pneumoniae strains belonging to 31 different species were negative for this MCDA assay. To evaluate the practical applicability of this method, we assessed its detection limit for K. pneumoniae strains in sputum samples (24 CFU per reaction), and DNA templates of 100 sputum samples further underwent the MCDA-LFB tests. All of the sputum samples being positive for K. pneumoniae (30/100) with the culture method were successfully identified with the MCDA assay, the detection power of which was higher than that of polymerase chain reaction (PCR) (25/100). Thus, the MCDA test for K. pneumoniae combined with the gold nanoparticle LFB as the results readout scheme, are simple, specific, and sensitive methods for the rapid diagnosis of K. pneumoniae in clinical samples.

Aptamers in the Therapeutics and Diagnostics Pipelines

Aptamers are short single-stranded DNA or RNA oligonucleotides that can selectively bind to small molecular ligands or protein targets with high affinity and specificity, by acquiring unique three-dimensional structures. Aptamers have the advantage of being highly specific, relatively small in size, non-immunogenic and can be easily stabilized by chemical modifications, thus allowing expansion of their diagnostic and therapeutic potential. Since the invention of aptamers in the early 1990s, great efforts have been made to make them clinically relevant for diseases like macular degeneration, cancer, thrombosis and inflammatory diseases. Furthermore, owing to the aforementioned advantages and unique adaptability of aptamers to point-of-care platforms, aptamer technology has created a stable niche in the field of in vitro diagnostics by enhancing the speed and accuracy of diagnoses. The aim of this review is to give an overview on aptamers, highlight the inherent therapeutic and diagnostic opportunities and challenges associated with them and present various aptamers that have reached therapeutic clinical trials, diagnostic markets or that have immediate translational potential for therapeutics and diagnostics applications.

Loop-mediated isothermal amplification (LAMP): a versatile technique for detection of micro-organisms

Loop‐mediated isothermal amplification (LAMP) amplifies DNA with high specificity, efficiency and rapidity under isothermal conditions by using a DNA polymerase with high displacement strand activity and a set of specifically designed primers to amplify targeted DNA strands. Following its first discovery by Notomi et al. (2000Nucleic Acids Res 28: E63), LAMP was further developed over the years which involved the combination of this technique with other molecular approaches, such as reverse transcription and multiplex amplification for the detection of infectious diseases caused by micro‐organisms in humans, livestock and plants. In this review, available types of LAMP techniques will be discussed together with their applications in detection of various micro‐organisms. Up to date, there are varieties of LAMP detection methods available including colorimetric and fluorescent detection, real‐time monitoring using turbidity metre and detection using lateral flow device which will also be highlighted in this review. Apart from that, commercialization of LAMP technique had also been reported such as lyophilized form of LAMP reagents kit and LAMP primer sets for detection of pathogenic micro‐organisms. On top of that, advantages and limitations of this molecular detection method are also described together with its future potential as a diagnostic method for infectious disease.

Antimicrobial activity of polymyxin-loaded solid lipid nanoparticles (PLX-SLN): Characterization of physicochemical properties and in vitro efficacy

Antimicrobial resistance is a current public health concern, limiting the available therapeutic options used for the treatment of common bacterial infections. The development of new drug entities via biotechnological processes is however expensive and time-consuming. Therefore, old antimicrobial agents have been recovered for clinical use. An example of these drugs is polymyxin, which is known for its serious adverse side effects, such as nephrotoxicity, neurotoxicity and promotion of skin pigmentation. To overcome these limitations, the use of biodegradable nanoparticles has been proposed to allow site-specific targeting, increasing the drug's bioavailability and decreasing its side effects. The aim of this work was the development of an optimized pharmaceutical formulation composed of solid lipid nanoparticles (SLN) loading polymyxin B sulphate (PLX) for the treatment of bacterial infections. The PLX-loaded SLN were produced by a double emulsion method (w/o/w), obtaining particles with a mean size of approximately 200nm, polydispersity of 0.3 and zeta potential of -30mV. The encapsulation efficiency reached values above 90% for all developed formulations. SLN remained stable for a period of 6months of storage at room temperature. The occlusive properties of the SLN was shown to be dependent on the type of lipid, while the antimicrobial properties of PLX-loaded SLN were effective against resistant strains of Pseudomonas aeruginosa. Results from the differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS) analyses confirmed the crystallinity of the inner SLN matrices, suggesting the capacity of these particles to modify the release profile of the loaded drug.

Surveillance of Dihydropteroate Synthase Genes in Stenotrophomonas maltophilia by LAMP: Implications for Infection Control and Initial Therapy

Stenotrophomonas maltophilia is a common nosocomial pathogen that causes high morbidity and mortality. Because of its inherent extended antibiotic resistance, therapeutic options for S. maltophilia are limited, and sulfamethoxazole/trimethoprim (SXT) is the only first-line antimicrobial recommended. However, with the spread of dihydropteroate synthase (sul1 and sul2) genes, global emergence of SXT resistance has been reported. There is an urgent need to develop a rapid and sensitive but cost-efficient method to monitor the dissemination of sul genes. In this study, we developed loop-mediated isothermal amplification (LAMP) assays for sul1 and sul2 using real-time turbidity and hydroxy naphthol blue coloration methods. The assays could quickly detect sul genes with high sensitivity and specificity. The LAMP detection limit was 0.74 pg/reaction of extracted genomic DNA for sul1 and 2.6 pg/reaction for sul2, which were both 10-fold more sensitive than the corresponding traditional PCR assays. Additionally, the LAMP assays could positively amplify DNA from sul1-producing strains, but not from the negative controls. We then used the LAMP assays to investigate the dissemination of sul genes among S. maltophilia isolates from patients in three hospitals in Beijing, China. Among 450 non-duplicated samples collected during 2012–2014, 56 (12.4%) strains were SXT-resistant. All these SXT-resistant strains were positive for sul genes, with 35 (62.5%) carrying sul1, 17 (30.4%) carrying sul2, and 4 (7.1%) carrying both sul1 and sul2, which indicated that sul genes were the predominant resistance mechanism. Of 394 SXT-susceptible strains, 16 were also sul-positive. To provide epidemiological data for the appropriate choice of antimicrobials for treatment of sul-positive S. maltophilia, we further tested the susceptibility to 18 antimicrobials. Among these, sul-positive strains showed the highest susceptibility to tetracycline derivatives, especially minocycline (MIC₅₀/MIC₉₀, 0.5/4; susceptibility rate, 95.4%). Ticarcillin-clavulanate and new fluoroquinolones (moxifloxacin and levofloxacin) also showed some in vitro activity. Apart from these three kinds of antimicrobials, other agents showed poor activity against sul-positive strains.