Review on the synergistic mechanisms in harnessing rice residue-derived cellulose nanocrystals for sustainable water purification and wastewater treatment

The review explores the innovative use of rice residue for developing Cellulose nanocrystals and reinforcement applications of CNCs for wastewater treatment. Rice residue, rich in lignocellulose components like cellulose, hemicellulose, and lignin, presents a sustainable resource for biocomposite fabrication. The review highlights the significant challenges of managing rice residue, particularly the environmental impact of its open field burning, which contributes to severe air pollution and health risks. By examining recent advancements in the extraction of cellulose nanocrystals (CNCs) from rice residue, the review emphasizes their potential for enhancing water treatment technologies and contributing to Sustainable Development Goal 6 (Clean Water and Sanitation). The review provides a comprehensive analysis of the current state of research such as facts and challenges related to using CNCs for water treatment, and suggests future directions for developing eco-friendly, high-performance water filtration and its reinforcement perspectives, underscoring the importance of integrating waste valorization with sustainable practices.

Nanocellulose-hydrogel hybrids: A review on synthesis and applications in agriculture, food packaging and water remediation

The growing demand for sustainable and environment-friendly materials has driven extensive research on biopolymers for applications in agriculture, food science, and environmental remediation. Among these, nanocellulose-hydrogel hybrids (NC-HHs) have gained significant attention as an innovative class of bio-based materials that uniquely combine the remarkable physicochemical properties of nanocellulose with the functional versatility of hydrogels. These hybrids are characterised by exceptional water retention, mechanical strength and biodegradability, enabling advances in precision agriculture, smart food preservation and contaminant remediation. This review provides a comprehensive understanding of the synthesis, properties, and multifunctional applications of NC-HHs, emphasising their innovative role in sustainability. In agriculture, NC-HHs enhance soil moisture retention, support plant growth, and serve as carriers for controlled-release fertilizers, optimizing water and nutrient use efficiency. In the food industry, they enable intelligent packaging solutions that extend shelf life, monitor food freshness, and inhibit microbial growth. Additionally, NC-HHs present groundbreaking strategies for environmental remediation by effectively immobilizing pollutants in water and soil. Beyond summarizing recent advances, this review presents an in-depth mechanistic perspective on the interactions between NC and HH, critically evaluating their structure-property relationships, functional adaptability and application-specific performance. By integrating recent advances in nanocellulose functionalisation, polymer chemistry and the development of responsive hydrogels, this review critically examines the key technological innovations and future prospects of NC-HHs, underscoring their transformative potential in addressing global challenges related to food security, environmental sustainability, and sustainable agricultural practices.

Networked cellulose-integrated highly permeable TFC polyamide membranes with tailored nanofiltration performance

Thin-film composite (TFC) membranes typically consist of a thin active polyamide layer atop a highly porous support layer, offering both enhanced permeability and excellent salt rejection. In this study, we propose the incorporation of networked cellulose (NC) into the aqueous layer leading to changes in the morphology, hydrophilicity, and surface charge, thereby significantly boosting membrane permeance and resistance to chlorine attack. The relatively unexplored NC, distinguished by its interconnected cellulosic fibrous structures, is introduced into the selective layer, resulting in a customized nanofiltration performance that varies depending on the concentration of NC. The fabricated TFC membranes, incorporating NC at a concentration of 0.01 % in the aqueous phase, exhibit a permeance of 19.1 ± 1.8 LMH bar-1 combined with excellent rejection (>90 %) for divalent salts, a remarkable improvement over pristine TFC membranes which offered 7.2 ± 0.5 LMH bar-1. Conversely, higher loading of NC (0.02 %) during fabrication results in highly permeable membranes up to 38.7 ±%3.1 LMH bar-1 maintaining exceptional dye rejection properties. Furthermore, our findings indicate enhanced resistance to chlorine attack, highlighting the versatility of NC incorporation in the selective layer. This study underscores the scope of NC as a cost-effective and environmentally benign additive for enhancing the performance of polyamide TFC nanofiltration membranes in water treatment and desalination applications.

Advancements in Cellulose-Based Materials for CO2 Capture and Conversion

This study explores the recent advances of cellulose-based materials in the context of carbon capture and conversion amid the global imperative to reduce CO2emissions. The review emphasizes the critical importance of selecting suitable materials for establishing a robust and secure carbon capture technology. From elucidating celluloses' molecular structure and unique properties to detailing the advancements in CO2 capture technologies, the narrative provides a comprehensive understanding of the intricate interplay between cellulose and sustainable CO2 management. The exploration extends to the design and synthesis of cellulose-based adsorbents, challenges in implementation, showcasing emerging trends and potential breakthroughs. Emphasizing the significance of cellulose in the circular carbon economy, this review serves as a beacon for interdisciplinary collaboration, urging further research and implementation for a greener and more sustainable future. A comprehensive overview of recent developments on cellulose-based aerogels, films, composites, and solid adsorbents in the field of carbon capture. It further elucidates the research mechanisms involved in utilizing cellulose-based materials to convert CO2 into formic acid, methanol, carbonate, and CO, offering detailed insights. The review concludes by addressing the challenges and key issues associated with cellulose-based materials in the context of carbon capture and utilization.

Bioinspired chitosan/PVA beads cross-linked with LTH-doped bacterial cellulose hydrochar for high-efficiency removal of antibiotics

This study presents the development of eco-friendly, bioinspired Chitosan (CS)/Polyvinyl alcohol (PVA) composite beads cross-linked with layered triple hydroxide (LTH) doped bacterial cellulose microfilament (BCM) Hydrochar as a highly efficient adsorbent for removing Vancomycin (VAN) and Azithromycin (AZM) from aqueous solutions. The composite beads were synthesized using a bioinspired approach that integrates 1D BCM Hydrochar and 2D LTH plates into a 3D hybrid structure, offering high porosity, diverse functional groups, and pH sensitivity. The adsorbents were characterized using FTIR, EDX, SEM, XRD, and zeta potential analysis. Optimal adsorption conditions, including 60 min of contact time, 0.133 g·L-1 dosage, and pH levels of 8 for VAN and 8.5 for AZM, achieved maximum adsorption capacities of 1845 mg·g-1 for AZM and 2182 mg·g-1 for VAN at a 500 mg·L-1 concentration. The adsorption mechanisms involved physisorption and chemisorption, influenced by surface heterogeneity and interactions. VAN exhibited stronger adsorption, while AZM displayed more uniform adsorption due to weaker interactions. The adsorbent retained high adsorption capacity across multiple regeneration cycles and demonstrated resilience in the presence of coexisting compounds, making it suitable for long-term wastewater treatment. This work highlights the promise of carbohydrate-derived, sustainable LTH@BCM char-CS/PVA composite beads as high-capacity adsorbents, offering an effective, eco-friendly solution for mitigating pharmaceutical pollutants in water.

Cellulose-Based Electrochemical Sensors

Among the most promising areas of research, cellulose-based electrochemical sensors stand out for their intrinsic properties such as abundance, biocompatibility, and versatility. This review is concerned with the integration and application of cellulose-derived materials in electrochemical sensors, pointing out improvements in sensitivity, selectivity, stability, and functionality for a wide variety of applications. The most relevant developments on cellulose-based sensors have been concentrated on nanocellulose composite synthesis, advanced cellulose modification, and the successful embedding in wearable technologies, medical diagnostics, and environmental monitoring. Considering these, it is worth mentioning that significant challenges still need to be overcome regarding the scalability of production, selectivity improvement, and long-term stability under real operational conditions. Future research efforts will concern the union of cellulose-based sensors with the Internet of Things (IoT) and artificial intelligence (AI) toward wiser and more sustainable health and environmental solutions. Correspondingly, this work puts cellulose in the front line among the most perspective materials for enabling the development of eco-friendly and high-performance sensing technologies.

Cellulose-Based Sorbents: A Comprehensive Review of Current Advances in Water Remediation and Future Prospects

Cellulose-based sorbents are promising materials for wastewater treatment due to their environmental friendliness, biodegradability, and high sorption capacity. This paper presents an overview of cellulose modification methods, including carboxylation, amination, oxidation, graphene, and plasma treatments, as well as combined approaches. Their effect on key physicochemical properties, such as porosity, morphology, and chemical stability, is considered. Examples from the literature confirm the effectiveness of modified cellulose sorbents in removing heavy metal ions and organic pollutants from wastewater. The analysis shows that combined methods allow for creating materials with improved characteristics that are resistant to extreme operating conditions. The main advantages and disadvantages of cellulose sorbents, as well as challenges associated with their scalability and cost-effectiveness, are discussed. The paper emphasizes the importance of further research to advance these materials as a key element of sustainable water treatment technologies.

Achieving 3-D Structural Uniformity in Cellulose Gel Beads via Salt Screening

Cellulose microgel beads fabricated using the dropping technique suffer from structural irregularity and mechanical variability. This limits their translation to biomedical applications that are sensitive to variations in material properties. Ionic salts are often uncontrolled by-products of this technique, despite the known effects of ionic salts on cellulose assembly. In this study, the coagulation behavior of cellulose/salt solutions was explored as a way to combat these challenges. An ionic salt (NaCl) was added to a cellulose solution (cellulose/NaOH/urea) prior to coagulation in a hydrochloric acid bath. Quantification of the bead geometry and characterization of the pore architecture revealed that balancing the introduction of salt with the resultant solution viscosity is more effective at reducing structural variability and diffusion limitations than other pre-gelling techniques like thermal gelation. Three-dimensional visualization of the internal pore structure of neat cellulose, thermo-gel, and salt-gel beads revealed that adding salt to the solution is the most effective way to achieve 3-D structural uniformity throughout the bead. Coupled with nanoindentation, we confirmed that the salt produced during coagulation plays a critical role in mechanical variability, and that adding salt to the solution before dropping into the coagulation bath completely screens this effect, producing uniform microgel beads with reproducible mechanical properties.

Modified Cellulose for Adsorption of Methylparaben and Butylparaben from an Aqueous Solution

Emerging contaminants are chemical products that are found in low concentrations, are not regulated by environmental norms, and cause health effects. Among this group of contaminants are parabens, a family of p-hydroxybenzoic acid esters used as preservatives in cosmetics, pharmaceuticals, and food products. Recent research describes parabens as endocrine disruptors that can cause health alterations. Some of the best alternatives for pollutant removal include the adsorption process, which can use materials that are inexpensive, abundant, and susceptible to modifications. In this sense, cellulose can be an option for obtaining materials that can be used in the removal of contaminants. This research investigates the synthesis of benzoic cellulose (MCB) and magnetic cellulose (MCM) as well as its use as an adsorbent for the removal of methylparaben (MP) and butylparaben (BP) from water. Likewise, physicochemical characterization, including Fourier transform infrared (FTIR), scanning electronic microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA), for both cellulose materials was carried out. Moreover, pseudo-first-order, pseudo-second-order, Elovich, Weber, Morris, and Boyd models were used to investigate the adsorption kinetics. As a result, the pseudo-second-order model was favorable for both modified cellulose and the two parabens assayed. Finally, Freundlich, Langmuir, and Sips adsorption isotherm models were investigated; the Langmuir model was the best for the adsorption isotherm data. The adsorption of methylparaben and butylparaben was in the following order: MCM > MCB. The maximum adsorption capacity of MP and BP for MCM was 9.58 and 12.03 mg g-1, respectively. For instance, the results showed that the modified cellulose adsorbed the parabens physically, which could involve electrostatic attraction, hydrogen bonding, π-π bonding, and hydrophobic interactions.

Cellulose Membranes: Synthesis and Applications for Water and Gas Separation and Purification

Membranes are a selective barrier that allows certain species (molecules and ions) to pass through while blocking others. Some rely on size exclusion, where larger molecules get stuck while smaller ones permeate through. Others use differences in charge or polarity to attract and repel specific species. Membranes can purify air and water by allowing only air and water molecules to pass through, while preventing contaminants such as microorganisms and particles, or to separate a target gas or vapor, such as H2 and CO2, from other gases. The higher the flux and selectivity, the better a material is for membranes. The desirable performance can be tuned through material type (polymers, ceramics, and biobased materials), microstructure (porosity and tortuosity), and surface chemistry. Most membranes are made from plastic from petroleum-based resources, contributing to global climate change and plastic pollution. Cellulose can be an alternative sustainable resource for making renewable membranes. Cellulose exists in plant cell walls as natural fibers, which can be broken down into smaller components such as cellulose fibrils, nanofibrils, nanocrystals, and cellulose macromolecules through mechanical and chemical processing. Membranes made from reassembling these particles and molecules have variable pore architecture, porosity, and separation properties and, therefore, have a wide range of applications in nano-, micro-, and ultrafiltration and forward osmosis. Despite their advantages, cellulose membranes face some challenges. Improving the selectivity of membranes for specific molecules often comes at the expense of permeability. The stability of cellulose membranes in harsh environments or under continuous operation needs further improvement. Research is ongoing to address these challenges and develop advanced cellulose membranes with enhanced performance. This article reviews the microstructures, fabrication methods, and potential applications of cellulose membranes, providing some critical insights into processing-structure-property relationships for current state-of-the-art cellulosic membranes that could be used to improve their performance.

Sulfonic acid functionalized cellulose-derived (nano)materials: Synthesis and application

The preparation/application of heterogeneous (nano)materials from natural resources has currently become increasingly fascinating for researchers. Cellulose is the most abundant renewable polysaccharide on earth. The unique physicochemical, structural, biological, and environmental properties of this natural biopolymer have led to its increased application in many fields. The more desirable features of cellulose-based (nano)materials such as biodegradability, renewability, biocompatibility, cost-effectiveness, simplicity of preparation, environmentally friendly nature, and widespread range of applications have converted them into promising compounds in medicine, catalysis, biofuel cells, and water/wastewater treatment processes. Functionalized cellulose-based (nano)materials containing sulfonic acid groups may prove to be one of the most promising sustainable bio(nano)materials of modern times in the field of cellulose science and (nano)technology owing to their intrinsic features, high crystallinity, high specific surface area, abundance, reactivity, and recyclability. In this review, the developments in the application of sulfonated cellulose-based (nano)materials containing sulfonic acid (-SO3H) groups in catalysis, water purification, biological/biomedical, environmental, and fuel cell applications have been reported. This review provides an overview of the methods used to chemically modify cellulose and/or cellulose derivatives in different forms, including nanocrystals, hydrogels, films/membranes, and (nano)composites/blends by introducing sulfonate groups on the cellulose backbone, focusing on diverse sulfonating agents utilized and substitution regioselectivity, and highlights their potential applications in different industries for the generation of alternative energies and products.

Interfacial interactions between spider silk protein and cellulose studied by molecular dynamics simulation

CONTEXT

Due to their excellent biocompatibility and degradability, cellulose/spider silk protein composites hold a significant value in biomedical applications such as tissue engineering, drug delivery, and medical dressings. The interfacial interactions between cellulose and spider silk protein affect the properties of the composite. Therefore, it is important to understand the interfacial interactions between spider silk protein and cellulose to guide the design and optimization of composites. The study of the adsorption of protein on specific surfaces of cellulose crystal can be very complex using experimental methods. Molecular dynamics simulations allow the exploration of various physical and chemical changes at the atomic level of the material and enable an atomic description of the interactions between cellulose crystal planes and spider silk protein. In this study, molecular dynamics simulations were employed to investigate the interfacial interactions between spider silk protein (NTD) and cellulose surfaces. Findings of RMSD, RMSF, and secondary structure showed that the structure of NTD proteins remained unchanged during the adsorption process. Cellulose contact numbers and hydrogen bonding trends on different crystalline surfaces suggest that van der Waals forces and hydrogen bonding interactions drive the binding of proteins to cellulose. These findings reveal the interaction between cellulose and protein at the molecular level and provide theoretical guidance for the design and synthesis of cellulose/spider silk protein composites.

METHODS

MD simulations were all performed using the GROMACS-5.1 software package and run with CHARMM36 carbohydrate force field. Molecular dynamics simulations were performed for 500 ns for the simulated system.

Exposure to microcrystallized cellulose affects the health of tadpoles and sheds light on the threat these materials pose to amphibians

The increasing use of cellulose-based materials (CBMs) has provided beneficial applications in different sectors. However, its release into environments may represent an ecological risk, therefore demanding that ecotoxicological studies be conducted to understand the risks (current and future) of CBM pollution. Thus, we evaluated the possible effects of microcrystalline cellulose (CMs) in Physalaemus cuvieri tadpoles. After seven days of exposure to CMs (at 58.29 and 100 mg/L), the animals were subjected to behavioral evaluation, and different biomarkers (biometric and biochemical) were evaluated. Although our data do not point to a neurotoxic effect of CMs (inferred by the absence of behavioral changes and changes in AChE and BChE activity), animals exposed to CMs showed differences in body condition. Furthermore, we noticed an increase in the frequency of erythrocyte nuclear abnormalities and DNA damage, which were correlated with the ingestion of CMs. We noticed that the antioxidant activity of tadpoles exposed to CMs (inferred by SOD, CAT, and DPPH radical scavenging activity) was insufficient to control the increase in ROS and MDA production. Furthermore, exposure to CMs induced a predominant Th2-specific immune response, marked by suppressed IFN-γ and increased IL-10 levels, with a consequent reduction in NO levels. Principal component analysis and IBRv-2 indicate, in general, a primarily more toxic response to animals exposed to the highest CM concentration. Therefore, our study evidence that CMs affect the health of P. cuvieri tadpoles and sheds light on the threat these materials pose to amphibians.

Nanocelluloses fine-tuned polyvinylidene fluoride (PVDF) membrane for enhanced separation and antifouling

To mitigate membrane fouling and address the trade-off between permeability and selectivity, we fabricated nanocellulose (NC) fine-tuned polyvinylidene fluoride (PVDF) porous membranes (NC-PVDFs) using phase inversion method through blending NCs with varied aspect ratios, surface charges and grafted functional groups. NC-PVDF presented rougher surface (increased by at least 18.3 %), higher porosity and crystallinity compared to PVDF membrane. Moreover, cellulose nanocrystals incorporated PVDF (CNC-PVDF) elevated membrane surface charge and hydrophilicity (from 74.3° to 71.7°), while 2,2,6,6-tetramethylpiperidine-1-oxyl-oxidized cellulose nanofibers modified PVDF (TCNF-PVDF) enhanced the porosity (from 25.0 % to 40.3 %) and tensile strength (63.6 % higher than PVDF). For separation performance, NC improved flux, rejection and fouling resistance due to facilitation of phase transition thermokinetics as pore-forming agent and increased hydrophilicity at both interface and pore wall. For water flux, NC-PVDFs (139-228 L·m-2·h-1) resulted in increased permeability compared to bare PVDF. CNC-PVDF membrane exhibited the highest water flux because of improved porosity, roughness and hydrophilicity. For bovine serum albumin (BSA) rejection, the removal rates of all NC-PVDFs were all above 90 %. Notably, TCNF-PVDF exhibited the most remarkable elevation of BSA rejection (95.1 %) owing to size exclusion and charge repulsion in comparison with PVDF.

Recent advances in cellulose-based sustainable materials for wastewater treatment: An overview

Water pollution presents a significant challenge, impacting ecosystems and human health. The necessity for solutions to address water pollution arises from the critical need to preserve and protect the quality of water resources. Effective solutions are crucial to safeguarding ecosystems, human health, and ensuring sustainable access to clean water for current and future generations. Generally, cellulose and its derivatives are considered potential substrates for wastewater treatment. The various cellulose processing methods including acid, alkali, organic & inorganic components treatment, chemical treatment and spinning methods are highlighted. Additionally, we reviewed effective use of the cellulose derivatives (CD), including cellulose nanocrystals (CNCs), cellulose nano-fibrils (CNFs), CNPs, and bacterial nano-cellulose (BNC) on waste water (WW) treatment. The various cellulose processing methods, including spinning, mechanical, chemical, and biological approaches are also highlighted. Additionally, cellulose-based materials, including adsorbents, membranes and hydrogels are critically discussed. The review also highlighted the mechanism of adsorption, kinetics, thermodynamics, and sorption isotherm studies of adsorbents. The review concluded that the cellulose-derived materials are effective substrates for removing heavy metals, dyes, pathogenic microorganisms, and other pollutants from WW. Similarly, cellulose based materials are used for flocculants and water filtration membranes. Cellulose composites are widely used in the separation of oil and water emulsions as well as in removing dyes from wastewater. Cellulose's natural hydrophilicity makes it easier for it to interact with water molecules, making it appropriate for use in water treatment processes. Furthermore, the materials derived from cellulose have wider application in WW treatment due to their inexhaustible sources, low energy consumption, cost-effectiveness, sustainability, and renewable nature.

Three-Dimensional Printing of Cellulose/Covalent Organic Frameworks (CelloCOFs) for CO2 Adsorption and Water Treatment

The development of porous organic polymers, specifically covalent organic frameworks (COFs), has facilitated the advancement of numerous applications. Nevertheless, the limited availability of COFs solely in powder form imposes constraints on their potential applications. Furthermore, it is worth noting that COFs tend to undergo aggregation, leading to a decrease in the number of active sites available within the material. This work presents a comprehensive methodology for the transformation of a COF into three-dimensional (3D) scaffolds using the technique of 3D printing. As part of the 3D printing process, a composite material called CelloCOF was created by combining cellulose nanofibrils (CNF), sodium alginate, and COF materials (i.e., COF-1 and COF-2). The intervention successfully mitigated the agglomeration of the COF nanoparticles, resulting in the creation of abundant active sites that can be effectively utilized for adsorption purposes. The method of 3D printing can be described as a simple and basic procedure that can be adapted to accommodate hierarchical porous materials with distinct micro- and macropore regimes. This technology demonstrates versatility in its use across a range of COF materials. The adsorption capacities of 3D CelloCOF materials were evaluated for three different adsorbates: carbon dioxide (CO2), heavy metal ions, and perfluorooctanesulfonic acid (PFOS). The results showed that the materials exhibited adsorption capabilities of 19.9, 7.4-34, and 118.5-410.8 mg/g for CO2, PFOS, and heavy metals, respectively. The adsorption properties of the material were found to be outstanding, exhibiting a high degree of recyclability and exceptional selectivity. Based on our research findings, it is conceivable that the utilization of custom-designed composites based on COFs could present new opportunities in the realm of water and air purification.

In situ modified nanocellulose/alginate hydrogel composite beads for purifying mining effluents

Biobased adsorbents and membranes offer advantages related to resource efficiency, safety, and fast kinetics but have challenges related to their reusability and water flux. Nanocellulose/alginate composite hydrogel beads were successfully prepared with a diameter of about 3-4 mm and porosity as high as 99%. The beads were further modified with in situ TEMPO-mediated oxidation to functionalize the hydroxyl groups of cellulose and facilitate the removal of cationic pollutants from aqueous samples at low pressure, driven by electrostatic interactions. The increased number of carboxyl groups in the bead matrix improved the removal efficiency of the adsorbent without compromising the water throughput rate; being as high as 17 000 L h-1 m-2 bar-1. The absorptivity of the beads was evaluated with UV-vis for the removal of the dye Methylene Blue (91% removal) from spiked water and energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) elemental analyses for the removal of Cd2+ from industrial mining effluents. The modified beads showed a 3-fold increase in ion adsorption and pose as excellent candidates for the manufacturing of three-dimensional (3-D) column filters for large-volume, high flux water treatment under atmospheric pressure.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

Thermo-Chemical Modification of Cellulose for the Adsorptive Removal of Titan Yellow from Wastewater

This research work focuses on the isolation and thermo-chemical modification of cellulose and its application as an adsorbent for the removal of organic pollutants. The used cellulose was collected from a locally available plant (Olive Europa) commonly called Zaitoon. The stem branches of Zaitoon were collected and then kept in water for 40-45 days at room temperature to extract the cellulose fibers. These cellulose fibers were then kept in the Soxhlet apparatus for washing in n-hexane for 72 h. The purified cellulose was divided into three parts: one part was subjected to thermal activation (TAC), the second was modified chemically (CMC) with Benzyl Chloride, while the last one remained un-functionalized (UFC). All the three forms of cellulose were characterized via FTIR and SEM, then utilized for the removal of Titan Yellow (TY) dye from aqueous media via adsorption process by varying the contact time, temperature, concentration of dye and type, and dose of adsorbent. The adsorption efficiencies of all adsorbents were compared under different experimental variables. Thermally activated cellulose showed the best results for the removal of TY compared with other materials. The calculated removal percentage of TY was found to be 97.69, 94.83, 94.83, and 98% under equilibrium conditions of contact time, temperature, adsorbent dose, and TY concentration. Similarly, the uptake capacities of TAC under optimal experimental conditions were found to be 19.56, 18.96, 18.52, and 18.75 mg/g. Thermodynamic studies of TAC, CMC, and UFC showed that the values of ΔG are negative, while those of ΔH and ΔS are positive in all cases and at all temperatures. This indicates that the TY elimination process is endothermic and spontaneous with an entropy-driven nature. The obtained results indicate that the as-fabricated low-cost biomaterials can effectively remove dyes from wastewater through physicochemical interactions. The removal process was influenced by the nature of the adsorbent and the operating variables.

Bio-sorbent from castor oil polyurethane foam containing cellulose-halloysite nanocomposite for removal of manganese, nickel and cobalt ions from water

In order to mitigate the contamination of water with heavy metals, caused by mining dam failures in Brumadinho and Mariana in Brazil, eco-friendly bio-based castor oil polyurethane foams, containing a cellulose-halloysite green nanocomposite were prepared. Polyurethane foams containing none (PUF-0), 5%wt (PUF-5), and 10%wt (PUF-10) of the nanocomposite were obtained. The application of the material in aqueous media was verified through an investigation of the efficiency of adsorption, the adsorption capacity, and the adsorption kinetics in pH= 2 and pH= 6.5 for manganese, nickel, and cobalt ions. An increase of 5.47 times in manganese adsorption capacity was found after only 30 min in contact with a solution having this ion at pH= 6.5 for PUF-5 and 11.38 times for PUF-10 when both were compared with PUF-0. Adsorption efficiency was respectively 68.17% at pH= 2 for PUF-5% and 100% for PUF-10 after 120 h, while for the control foam, PUF-0, the adsorption efficiency was only 6.90%.

Adsorption of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose beads: Characterization, toxicity tests, and adsorption experiments

Mercury (Hg) is widely used in many industrial processes and is released into the environment. Therefore, efficient removal of Hg from water is of vital importance worldwide. Here, we explored the adsorption characteristics of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose (PEI-CMC) beads and studied the toxicity of the beads toward Daphnia magna and Pseudokirchneriella subcapitata. The PEI-CMC beads had an average particle size of 2.04 ± 0.25 mm, a point of zero charge (pH_pzc) of 5.8, and a swelling ratio of 2.45. Acute toxicity tests demonstrated that the PEI-CMC beads had no toxic effects on D. magna. The growth inhibition tests revealed that growth inhibition of P. subcapitata could be attributed to adsorption of trace elements in growth media on the PEI-CMC beads. The adsorption experiments exhibited that the Matthews and Weber model best described the kinetic data, whereas the Redlich-Peterson model was well fitted to the isotherm data. The theoretical maximum Hg(II) adsorption capacity of the PEI-CMC beads was 313.1 mg/g. The thermodynamic experiments showed endothermic nature of the Hg(II) adsorption on the PEI-CMC beads at 10-40 °C. The adsorption experiments exhibited that the Hg(II) adsorption capacity decreased gradually as pH increased from 2 to 12. The adsorption of Hg(II) on the PEI-CMC beads can occur through chelation and electrostatic attraction. The FTIR and XPS spectra before and after Hg(II) adsorption confirmed that chelation of neutral Hg(II) species (HgCl₂, HgClOH, and Hg(OH)₂) can occur with amino and oxygen-containing functional groups on the PEI-CMC beads. Considering species distribution of Hg(II) and the pH_pzc of the PEI-CMC beads, electrostatic attraction between the positively-charged beads and anionic Hg(II) species (HgCl₃^- and HgCl₄^2-) can take place in highly acidic solutions. The PEI-CMC beads were regenerated and reused for Hg(II) adsorption using 0.1 M HCl.

Facile Synthesis of the Polyaniline@Waste Cellulosic Nanocomposite for the Efficient Decontamination of Copper(II) and Phenol from Wastewater

The existence of heavy metals and organic pollutants in wastewater is a threat to the ecosystem and a challenge for researchers to remove using common technology. Herein, a facile one-step in situ oxidative polymerization synthesis method has been used to fabricate polyaniline@waste cellulosic nanocomposite adsornt, polyaniline-embedded waste tissue paper (PANI@WTP) to remove copper(II) and phenol from the aqueous solution. The structural and surface properties of the synthesized materials were examined by XRD, FTIR, TEM, and a zeta potential analyzer. The scavenging of the Cu(II) and phenol onto the prepared materials was investigated as a function of interaction time, pollutant concentration, and solution pH. Advanced kinetics and isotherms modeling is used to explore the Cu(II) ion and phenol adsorption mechanisms. The synthesized PANI@WTP adsorbent showed a high intake capacity for Cu(II) than phenol, with the maximum calculated adsorption capacity of 605.20 and 501.23 mg g^-1, respectively. The Langmuir equilibrium isotherm model is well-fitted for Cu(II) and phenol adsorption onto the PANI@WTP. The superior scavenging capability of the PANI@WTP for Cu(II) and phenol could be explained based on the host-guest interaction forces and large active sites. Moreover, the efficiency of the PANI@WTP for Cu(II) and phenol scavenging was excellent even after the five cycles of regeneration.

Cellulose and protein nanofibrils: Singular biobased nanostructures for the design of sustainable advanced materials

Polysaccharides and proteins are extensively used for the design of advanced sustainable materials. Owing to the high aspect ratio and specific surface area, ease of modification, high mechanical strength and thermal stability, renewability, and biodegradability, biopolymeric nanofibrils are gaining growing popularity amongst the catalog of nanostructures exploited in a panoply of fields. These include the nanocomposites, paper and packaging, environmental remediation, electronics, energy, and biomedical applications. In this review, recent trends on the use of cellulose and protein nanofibrils as versatile substrates for the design of high-performance nanomaterials are assessed. A concise description of the preparation methodologies and characteristics of cellulosic nanofibrils, namely nanofibrillated cellulose (NFC), bacterial nanocellulose (BNC), and protein nanofibrils is presented. Furthermore, the use of these nanofibrils in the production of sustainable materials, such as membranes, films, and patches, amongst others, as well as their major domains of application, are briefly described, with focus on the works carried out at the BioPol4Fun Research Group (Innovation in BioPolymer based Functional Materials and Bioactive Compounds) from the Portuguese associate laboratory CICECO-Aveiro Institute of Materials (University of Aveiro). The potential for partnership between both types of nanofibrils in advanced material development is also reviewed. Finally, the critical challenges and opportunities for these biobased nanostructures for the development of functional materials are addressed.

Membranes for Oil/Water Separation: A Review

Recent advancements in separation and membrane technologies have shown a great potential in removing oil from wastewaters effectively. In addition, the capabilities have improved to fabricate membranes with tunable properties in terms of their wettability, permeability, antifouling, and mechanical properties that govern the treatment of oily wastewaters. Herein, authors have critically reviewed the literature on membrane technology for oil/water separation with a specific focus on: 1) membrane properties and characterization, 2) development of various materials (e.g., organic, inorganic, and hybrid membranes, and innovative materials), 3) membranes design (e.g., mixed matrix nanocomposite and multilayers), and 4) membrane fabrication techniques and surface modification techniques. The current challenges and future research directions in materials and fabrication techniques for membrane technology applications in oil/water separation are also highlighted. Thus, this review provides helpful guidance toward finding more effective, practical, and scalable solutions to tackle environmental pollution by oils.

Ca2Fe2O5 powder antifungal activity to the Candida utilis culture upon its growth

This study reports the impact of Ca₂Fe₂O₅ porous powder on the yeast Candida utilis-as a fungal model-at different phases of growth, i.e., early exponential (6 h), mid-log (11 h), and stationary (17 h) phases. Ca₂Fe₂O₅ inhibited the cell growth in a time-dependent manner. After 120 min incubation, the fungicidal activity of porous powder was observed, i.e., log reduction of 2.81 and 2.58 for 11 and 17 h cultures, respectively, reaching the maximum of 4 log reduction after 7 days. Nevertheless, the 6 h culture of C. utilis showed enhanced resistance to Ca₂Fe₂O₅ with a ≤ 0.4 log reduction during the 7 days exposure. Our results not only showed that Ca₂Fe₂O₅ has the potential to effectively eliminate the C. utilis cell growth but also indicated the importance of the yeast culture physiological state for resistance to Ca₂Fe₂O₅. To the best of our knowledge, this is the first study that evaluated the fungicidal activity of Ca₂Fe₂O₅ porous powder on C. utilis and the impact of the C. utilis phase of growth on the cell susceptibility.

The Improved Properties of Carboxymethyl Bacterial Cellulose Films with Thickening and Plasticizing

This study aims to improve the thermal stability and mechanical properties of carboxymethyl bacterial cellulose (CMBC) composite films. Experiments were conducted by preparing bacterial cellulose (BC) into CMBC, then parametrically mixing sodium alginate/starch/xanthan gum/gelatin and glycerin/sorbitol/PEG 400/PEG 6000 with CMBC to form the film. Scanning electron microscopy, X-ray diffractometry, infrared spectroscopy, mechanical tests, and thermogravimetric analysis showed that the composite films had better mechanical properties and thermal stability with the addition of 1.5% CMBC (% v/v), 1% sodium alginate, and 0.4% glycerin. Tensile strength was 38.13 MPa, the elongation at break was 13.4%, the kinematic viscosity of the film solution was 257.3 mm²/s, the opacity was 4.76 A/mm, the water vapor permeability was 11.85%, and the pyrolysis residue was 45%. The potential causes for the differences in the performance of the composite films were discussed and compared, leading to the conclusion that CMBC/Sodium alginate (SA)/glycerin (GL) had the best thermal stability and mechanical properties.

Furcellaran Surface Deposition and Its Potential in Biomedical Applications

Surface coatings of materials by polysaccharide polymers are an acknowledged strategy to modulate interfacial biocompatibility. Polysaccharides from various algal species represent an attractive source of structurally diverse compounds that have found application in the biomedical field. Furcellaran obtained from the red algae Furcellaria lumbricalis is a potential candidate for biomedical applications due to its gelation properties and mechanical strength. In the present study, immobilization of furcellaran onto polyethylene terephthalate surfaces by a multistep approach was studied. In this approach, N-allylmethylamine was grafted onto a functionalized polyethylene terephthalate (PET) surface via air plasma treatment. Furcellaran, as a bioactive agent, was anchored on such substrates. Surface characteristics were measured by means of contact angle measurements, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Subsequently, samples were subjected to selected cell interaction assays, such as antibacterial activity, anticoagulant activity, fibroblasts and stem cell cytocompatibility, to investigate the Furcellaran potential in biomedical applications. Based on these results, furcellaran-coated PET films showed significantly improved embryonic stem cell (ESC) proliferation compared to the initial untreated material.

Chitosan-CdS Quantum Dots Biohybrid for Highly Selective Interaction with Copper(II) Ions

Cadmium sulfide (CdS) quantum dots (QDs) were homogeneously embedded into chitosan (CTS), denoted as CdS@CTS, via an in situ hydrothermal method. The intact structure of the synthesized materials was preserved using freeze-drying. The materials were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy, transmission electron microscopy, high-resolution TEM, scanning TEM, dispersive energy X-ray (EDX) for elemental analysis and mapping, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, thermogravimetric analysis, UV-vis spectroscopy, and diffuse reflectance spectroscopy (DRS). The synthesis procedure offered CdS QDs of 1-7 nm (average particle size of 3.2 nm). The functional groups of CTS modulate the in situ growth of CdS QDs and prevent the agglomeration of CdS QDs, offering homogenous distribution inside CTS. CdS@CTS QDs can also be used for naked-eye detection of heavy metals with high selectivity toward copper (Cu2+) ions. The mechanism of interactions between Cu2+ ions and CdS@CTS QDs were further studied.

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. It includes an extensive bibliography of recent research findings from fundamental and applied investigations. Cellulose-based materials are tailorable to obtain suitable chemical, mechanical, and physical properties required for biomedical applications. The chemical structure of cellulose allows modifications and simple conjugation with several materials, including nanoparticles, without tedious efforts. They render the applications cheap, biocompatible, biodegradable, and easy to shape and process.

Multiscale Mechanical Performance of Wood: From Nano- to Macro-Scale across Structure Hierarchy and Size Effects

This review describes methods and results of studying the mechanical properties of wood at all scales: from nano- to macro-scale. The connection between the mechanical properties of material and its structure at all these levels is explored. It is shown that the existing size effects in the mechanical properties of wood, in a range of the characteristic sizes of the structure of about six orders of magnitude, correspond to the empirical Hall-Petch relation. This “law” was revealed more than 60 years ago in metals and alloys and later in other materials. The nature, as well as the particular type of the size dependences in different classes of materials can vary, but the general trend, “the smaller the stronger”, remains true both for wood and for other cellulose-containing materials. The possible mechanisms of the size effects in wood are being discussed. The correlations between the mechanical and thermophysical properties of wood are described. Several examples are used to demonstrate the possibility to forecast the macromechanical properties of wood by means of contactless thermographic express methods based on measuring temperature diffusivity. The research technique for dendrochronological and dendroclimatological studies by means of the analysis of microhardness and Young’s modulus radial dependences in annual growth rings is described.

Hierarchical porous zeolitic imidazolate frameworks (ZIF-8) and ZnO@N-doped carbon for selective adsorption and photocatalytic degradation of organic pollutants

Removing organic contaminants such as dyes from water is essential to purify wastewater. Herein, zeolitic imidazolate framework-8 (ZIF-8) and ZnO@N-doped C are reported as effective adsorbents and photocatalysts for the adsorption and degradation of organic dyes. The materials showed effective and selective adsorption toward anionic dyes such as methyl blue (MeB) dye in the presence of fluorescein (FLU) dye. The adsorption capacities of ZnO@N-doped C for MeB and FLU dyes are 900 mg g-1 and 100 mg g-1, respectively. According to UV-Vis diffuse reflectance spectroscopy (DRS) data, ZnO@N-doped C has a lower bandgap (2.07 eV) than ZIF-8 (4.34 eV) and ZnO (3.12 eV). Thus, ZnO@N-doped C serves as an effective photocatalyst for the degradation of both dyes under UV exposure. The degradation efficiency capacity of the dye (50 mg L-1) is >90% using 200 mg L-1 of the photocatalyst. The mechanism of adsorption and photocatalysis is investigated. The photodegradation pathway of the dye involved the generation of oxidative hydroxy radicals (OH˙), which can degrade the dyes. The degradation products of FLU were recorded using mass spectrometry.