Carbon Supported Gold Nanoparticles for the Catalytic Reduction of 4-Nitrophenol

In-vivo anticoccidial efficacy of green synthesized iron-oxide nanoparticles using Ficus racemosa Linn leaf extract. (Moraceae) against Emeria tenella infection in broiler chicks

Coccidiosis is an acute gastrointestinal parasitic disease and causes approximately $2.80 to $3.27 per m2 loss in a broiler farm of a 33-day-old flock. In this study, iron oxide nanoparticles (IONPs) were green synthesized using the aqueous leaf extract of Ficus racemosa as a reducing and capping agent to reduce the emerging resistance in coccidia spores against conventional treatments and boost the immune level in broilers. These IONPs were evaluated for their impacts on the growth performance, biochemistry, blood profile, and histology in the coccidiodized broiler chicken with Emeria tenella under in vivo conditions. The characteristics and stability of particles were obtained using UV-Vis spectroscopy, Fourier transforms infrared (FTIR), X-Ray diffraction (XRD), energy dispersive X-ray absorption (EDX), scanning electron microscopy (SEM), zeta potential and zeta size. The results indicated that IONPs at the moderate dose of 15 mg/kg (p = 0.001) reduced the coccidial impacts by eliminating oocyst shedding per gram feces (up to 91%) and reducing clinical symptoms (lesions (LS = 0), bloody diarrhea (No), and mortality (0%) in chicken at day 10 of treatment as compared to the negative control group-B (infected & non-treated). A dose-dependent and time-dependent trend were observed during treatments (10, 15, and 20 mg/kg) of 1-3 weeks using IONPs against the coccidial impacts on the growth parameters (body weight gain, mean feed consumption, feed conversion ratio) and biochemistry (plasma glucose, total protein, uric acid, ALT, AST, and ALP) in chickens. Additionally, F. racemosa IONPs at a dose of 15 and 20 mg/kg significantly recovered the parasitized and highly damaged hepatocytes, liver tissues, and ceca tissues after 1-3 weeks of treatment in broiler chickens. Overall, the 15 mg/kg concentration of IONPs exhibited fast recovery and growth enhancement in coccidiodized broilers. Therefore, the 15 mg/kg dose of green synthesized IONPs using leaf extract of F. racemosa could be a potential and safe anticoccidial agent with targeted implications in the poultry industry.

Larvicidal activity of green synthesized iron oxide nanoparticles using Grevillea robusta Cunn. leaf extract against vector mosquitoes and their characterization

Extensive fumigation of synthetic pesticides to control the mosquito vector during each post-monsoon season in Pakistan significantly enhanced the environmental contamination and extinction of beneficial insects from the urban ecosystems. In this context, the present study examined the larvicidal efficacy of green synthesized iron nanoparticles (IONPs), using an aqueous leaf extract of Grevillea robusta against the early 2nd and 4th instar larvae of Aedes aegypti and Anopheles stephensi in Pakistan. The prepared IONPs were characterized by UV-Vis spectrum, FTIR, X-ray diffraction, scanning electron microscopy, and energy-dispersive diffraction. Larvicidal bioassay was conducted at various concentrations (80, 160, 240, 320, and 400 ppm) of IONPs prepared from leaf extract of G. robusta, and readings were taken-every 12 h for two consecutive days. In vitro, larvicidal assay, G. robusta leaf extract IONPs exhibited high mortalities of 64-96% (LC50 = 259.07 ppm; LC90 = 443.92 ppm) for the second instar and 65-98% (LC50 = 238.05 ppm; LC90 = 433.93 ppm) for the fourth instar of Ae. aegypti, while in the case of An. stephensi 56-84% (LC50 = 297.96 ppm; LC90 = 528.69 ppm) for the second and 56-88% (LC50 = 292.72 ppm; LC90 = 514.00 ppm) mortality for fourth larvae at 12-48 h post-exposure times were observed respectively. Significant (p < 0.05) dose-dependent and exposure time-dependent trends were observed among the 2nd and 4th larvalinstar of An. stephensi and Ae. aegypti. However, both species showed similar response and observed no significant (p > 0.05) difference in percentage mortality between the vector mosquitoes An. stephensi and Ae. aegypti. Overall, this study demonstrates that the larvicidal efficacy of green synthesized IONPs at low concentrations can be an ideal eco-friendly and cost-effective biocontrol of vector mosquitoes' larvae of An. stephensi and Ae. aegypti.

Biochar production from cellulose under reductant atmosphere: influence of the total pyrolysis time

Today's rising energy costs, coupled with increasing energy demand, make it necessary to search for more efficient energy processes. In recent years, there have been increasing efforts to develop efficient catalysts based on waste-derived char, by a single step where the carbon precursor and the metallic active phase one undergo a single common thermal process under a reductant atmosphere at high temperature. The use of a reductant atmosphere drives the formation of carbonaceous materials with different characteristics than those obtained under the standard nitrogen-inert one. Our work evaluates the influence of the residence time and the heating rate on the physicochemical properties of the biochar obtained. Relatively long residence times and slow heating rates, improve the yield to the resulting biochar, without increasing production cost, making the subsequent char-based metallic catalyst synthesis more efficient. The heating rate was shown to be key in improving the properties of the char in a smoother and more controlled way, unlocking a new working pathway for the efficient design and production of char-based catalysts in a one-pot synthesis.

Catalytic Reduction of p-Nitrophenol on MnO2/Zeolite -13X Prepared with Lawsonia inermis Extract as a Stabilizing and Capping Agent

p-nitrophenol (pNP) is a highly toxic organic compound and is considered carcinogenic and mutagenic. It is a very stable compound with high resistance to chemical or biological degradation. As a result, the elimination of this pollutant has been very challenging for many researchers. Catalytic reduction is one of the most promising techniques, if a suitable catalyst is developed. Thus, this work aims to prepare an eco-friendly catalyst via a simple and low-cost route and apply it for the conversion of the toxic p-nitrophenol (pNP) into a non-toxic p-aminophenol (pAP) that is widely used in industry. Manganese oxide was prepared in an environmentally friendly manner with the aid of Lawsonia inermis (henna) extract as a stabilizing and capping agent and loaded on the surface of 13X molecular sieve zeolite. The UV-Vis spectrum, EDS, and XRD patterns confirmed the formation of the pure MnO₂ loaded on the zeolite crystalline network. The TGA analysis showed that the samples prepared by loading MnO₂ on zeolite (Mn2Z, Mn3Z, and Mn4Z) lost more mass than pure MnO₂ (Mn) or zeolite (Z), which is mainly moisture adsorbed on the surface. This indicates a better dispersion of MnO₂ on the surface of zeolite compared to pure MnO₂, and thus a higher number of active adsorption sites. SEM images and EDS confirmed the dispersion of the MnO₂ on the surface of the zeolite. Results showed a very fast reduction rate, following the order Mn2Z > Mn3Z > Mn4Z > Mn > Z. With sample Mn2Z, 96% reduction of pNP was achieved in 9 min and 100% in 30 min. For Mn3Z, Mn4Z, and Mn, 98% reduction was achieved in 20 min and 100% in 30 min. Zeolite was the slowest, with only a 40% reduction in 30 min. Increasing the amount of zeolite in the synthesis mixture resulted in lower reduction efficiency. The kinetic study indicated that the reduction of p-nitrophenol on the surface of the prepared nanocomposite follows the pseudo-first-order model. The results show that the proposed nanocomposite is very effective and very promising to be commercially applied in water treatment, due to its low cost, simple synthesis procedure, and reusability.

Novel biogenic gold nanoparticles stabilized on poly(styrene-co-maleic anhydride) as an effective material for reduction of nitrophenols and colorimetric detection of Pb(II)

Biogenic gold nanoparticles (AuNPs) have been extensively studied for the catalytic conversion of nitrophenols (NP) into aminophenols and the colorimetric quantification of heavy metal ions in aqueous solutions. However, the high self-agglomeration ability of colloidal nanoparticles is one of the major obstacles hindering their application. In the present study, we offered novel biogenic AuNPs synthesized by a green approach using Cistanche deserticola (CD) extract as a bioreducing agent and stabilized on poly(styrene-co-maleic anhydride) (PSMA). The prepared Au@PSMA nanoparticles were characterized by various techniques (HR-TEM, SEAD, FE-SEM, DLS, TGA, XRD, and FTIR) and studied for two applications: the catalytic reduction of 3-NP by NaBH₄ and the sensing detection of Pb²⁺ ions. The optimal conditions for the synthesis of AuNPs were investigated and established at 60 °C, 20 min, pH of 9, and 0.5 mM Au³⁺. Morphological studies showed that AuNPs synthesized by CD extract were mostly spherical with a mean diameter of 25 nm, while the size of polymer-integrated AuNPs was more than two-fold larger. Since PSMA acted as a matrix keeping the nanoparticles from coagulation and maintaining the optimal surface area, AuNPs integrated with PSMA showed higher catalytic efficiency with a faster reaction rate and lower activation energy than conventional nanoparticles. Au@PSMA could completely reduce 3-NP within 10 min with a rate constant of 0.127 min^-1 and activation energy of 9.96 kJ/mol. The presence of PSMA also improved the stability and recyclability of AuNPs. Used as a sensor, Au@PSMA exhibited excellent sensitivity and selectivity for Pb²⁺ ions with a limit of detection of 0.03 μM in the linear range of 0-100 μM. The study results suggested that Au@PSMA could be used as a promising catalyst for the reduction of NP and the colorimetric sensor for detection of Pb²⁺ ions in aqueous environmental samples.

Compositionally Anisotropic Colloidal Surfactant Decorated with Dual Metallic Nanoparticles as a Pickering Emulsion Stabilizer and Their Application in Catalysis

We aim to introduce compositionally anisotropic Janus particles, hemispheres of which was modified by hydrophilic poly(2-dimethyl amino ethyl methacrylate) [poly(DMAEMA)] brushes to display amphiphilic surfactant-type characteristics. Acquired by the electrohydrodynamic co-jetting technique, these colloidal surfactants were employed to stabilize octanol/water-based Pickering emulsion, which shows prolonged stability for more than 4 months. To explore their potential as the interfacial catalyst, iron(0) nanoparticles were incorporated in one hemisphere during electrojetting, whereas gold nanoparticles (GNPs) were patched onto the surface of the other hemisphere, which was previously modified by the poly(DMAEMA) brush. Ultimately, simultaneous rapid reduction (100% conversion in 1 min) of p-nitrophenol or methyl orange (MO) by GNPs in the aqueous phase and dechlorination of trichloroethylene (a hazardous chlorinated solvent waste) present in the octanol phase were accomplished at the organic-water interface stabilized by the Janus particles decorated by dual metallic nanoparticles. In addition, facile recovery and recyclability of the catalyst were also achieved. The novel colloidal surfactant demonstrated in this study may open up a new avenue to accomplish catalysis of several organic reactions occurring at the water-oil interface.

Gold Catalyst Anchored to Pre-Reduced Co3O4 Nanorods for the Hydrodeoxygenation of Vanillin Using Alcohols as Hydrogen Donors

The preparation of highly dispersed metal catalysts with strong electronic metal-support interactions (EMSIs) is of great significance. In this study, oxygen vacancies (OVs) were generated on the surfaces of Co₃O₄ nanorods (NRs) through NaBH₄ treatment, and then the generated surface OVs were used to anchor gold clusters. The resulting catalyst was used for the hydrodeoxygenation (HDO) of vanillin based on transfer hydrogenation with alcohol donors. The conversion of vanillin and the selectivity to 2-methoxy-4-methylphenol (MMP) both reached 99% under the optimized reaction conditions, and these values were significantly higher than those obtained for the gold catalyst supported on the untreated Co₃O₄ NRs. The obtained results were verified by theoretical calculations and experimental data and confirmed the existence of strong EMSIs between the OV-enriched Co₃O₄ NRs (Co₃O₄ NRs-OVs) and the gold clusters, which allows electron transfer from the Co₃O₄ NRs to gold. Increasing the number of electrons on the gold surface can promote the catalytic hydrogen transfer of alcohol, in addition to selectively adsorbing the C═O group in vanillin to improve the selectivity toward MMP. This strategy based on the OV-anchoring of metals onto the surface of a support can be extended to other metals, thereby providing a promising method for the design of advanced and highly efficient metal catalysts.

Biosynthesis of Gold Nanoisotrops Using Carallia brachiata Leaf Extract and Their Catalytic Application in the Reduction of 4-Nitrophenol

The past decade has observed a significant surge in efforts to discover biological systems for the fabrication of metal nanoparticles. Among these methods, plant-mediated synthesis has garnered sizeable attention due to its rapid, cost-effective, environmentally benign single-step procedure. This study explores a step-wise, room-temperature protocol for the synthesis of gold nanoparticles (AuNPs) using Carallia brachiata, a mangrove species from the west coast of Peninsular Malaysia. The effects of various reaction parameters, such as incubation time, metal ion concentration, amount of extract and pH, on the formation of stable colloids were monitored using UV-visible (UV-Vis) absorption spectrophotometry. Our findings revealed that the physicochemical properties of the AuNPs were significantly dependent on the pH. Changing the pH of the plant extract from acidic to basic appears to have resulted in a blue-shift in the main characteristic feature of the surface plasmon resonance (SPR) band, from 535 to 511 nm. The high-resolution-transmission electron microscopy (HR-TEM) and field emission scanning electron microscopy (FESEM) images revealed the morphologies of the AuNPs synthesized at the inherent pH, varying from isodiametric spheres to exotic polygons and prisms, with sizes ranging from 10 to 120 nm. Contrarily, an optimum pH of 10 generated primarily spherical-shaped AuNPs with narrower size distribution (8–13 nm). The X-ray diffraction (XRD) analysis verified the formation of AuNPs as the diffraction patterns matched well with the standard value of a face-centered cubic (FCC) Au lattice structure. The Fourier-transform infrared (FTIR) spectra suggested that different functional groups are involved in the biosynthetic process, while the phytochemical test revealed a clear role of the phenolic compounds. The reduction of 4-nitrophenol (4-NP) was selected as the model reaction for evaluating the catalytic performance of the green-synthesized AuNPs. The catalytic activity of the small, isotropic AuNPs prepared using basic aqueous extract was more effective than the nanoanisotrops, with more than 90% of 4-NP conversion achieved in under an hour with just 3 mg of the nanocatalyst.

Ag nanoparticles supported on a magnetic NiFe2O4/MIL-101(Fe) metal–organic framework nanocomposite for the room temperature rapid catalytic reduction of nitrophenols and nitroanilines

A novel Ag@NiFe2O4/MIL101(Fe) ternary magnetic nanocomposite was synthesized for the room temperature rapid catalytic reduction of nitrophenols and nitroanilines.

Synthesis of Gold Nanoparticles Using Tannin-Rich Extract and Coating onto Cotton Textiles for Catalytic Degradation of Congo Red

Gold nanoparticles (AuNPs) were synthesized under ambient conditions from chloroauric acid in aqueous solution at pH 4. Tannin-rich extract from Xylocarpus granatum bark was used as both reducing and capping agent, rapidly converting Au (I) salt to AuNPs. Transmission electron microscopy showed the as-prepared AuNPs to be predominantly spherical, with an average diameter of 17 nm. The AuNPs were tested for catalytic reduction of Congo red (CR), a carcinogenic azo dye, in aqueous sodium borohydride solution. Cotton samples were coated with the AuNPs, taking on a reddish-purple color. The samples showed significantly reduced tearing strength after coating, though tensile strength was unaffected. UV-visible spectroscopy was used to determine the dye concentration in the water. CR degradation was observed only when AuNPs were present, and the efficiency of degradation was strongly linked to the AuNP loading. The AuNP-coated fabrics left only a 4.7% CR concentration in the solution after 24 h and therefore promise as a heterogeneous catalyst for degradation of CR in aqueous solution.

Preparation and catalytic evaluation of Au/γ -Al2O3 nanoparticles for the conversion of 4-nitrophenol to 4-aminophenol by spectrophotometric method

A set of catalysts having gold nanoparticles deposited on γ -Al₂O₃ ( Au/ γ -Al₂O₃) with lowest effective amount of gold content were prepared by successive impregnation and hydrogen reduction method. The structural features of prepared catalysts were analysed by X-ray diffraction (XRD), N2 physisorption, scanning electron microscopy (SEM), and Fourier transform infrared (FTIR). The catalytic activity was evaluated for the reduction of an organic pollutant 4-nitrophenol (4NP) to 4-aminophenol (4AP) by spectrophotometric analysis. Supported catalyst presented excellent catalytic ability to convert 4NP to 4AP in the presence of sodium borohydride (SBH) due to synergistic effect of Au NPs and mesoporous γ -Al₂O₃ support. The reduction reaction was also performed at a range of temperatures to calculate kinetic parameters. The development of highly stable Au/γ -Al₂O₃ catalysts with lowest noble metal content and recyclability made the process cost effective and may promote their applications in various fields including removal of organic pollutants in industrial waste water and high-temperature gas-phase reactions.