PAA Modified Upconversion Nanoparticles for Highly Selective and Sensitive Detection of Cu2+ Ions

Rapid detection of microalgae cells based on upconversion nanoprobes

The quantification of microalgae cells is crucial for the treatment of ships' ballast water. However, achieving rapid detection of microalgae cells remains a substantial challenge. Here, we develop a new method for rapid and effective detection of microalgae concentration by utilizing upconversion nanoprobes (UCNPs) of NaYF4:Er3+,Tm3+. Three ligands, carboxylated methoxypolyethylene glycols with 5000 and 2000 molecular weights (mPEG-COOH-5, mPEG-COOH-2) and D-gluconic acid sodium salt (DGAS), were used to convert hydrophobic UCNPs into a hydrophilic state through modification. The results show that the mPEG-COOH-5 modified UCNPs present the highest stability in an aqueous solution. Fourier Transform Infrared Spectroscopy (FTIR) measurements reveal the presence of a significant number of -COOH functional groups on UCNPs after the mPEG-COOH-5 modification. These -COOH groups enhance the hydrophilicity and biocompatibility of UCNPs. The soluble UCNPs were directly mixed with microalgae, and the upconversion luminescence (UCL) spectra of the UCNPs were recorded immediately after thorough shaking. This greatly reduces the measurement time and could realize rapid onboard detection. In this sensing procedure, the UCNPs with red UCL functioned as energy donors, while microalgae with red absorption served as an energy acceptor. The UCL gradually diminishes with an increase in microalgae concentration based on the inner filter effect, thus establishing a relationship between UCL and microalgae concentration. The accuracy of the detection is further validated through the traditional microscope counting method. These findings pave the way for a novel rapid strategy to assess microalgae concentration using UCNPs.

Highly water-soluble and biocompatible hyaluronic acid functionalized upconversion nanoparticles as ratiometric nanoprobes for label-free detection of nitrofuran and doxorubicin

Antibiotic detection is crucial and challenging because the widespread consumption of antibiotics has shown extensive harmful effects on food, environment and human health. Here, we propose highly water-soluble and biocompatible hyaluronic acid (HYA) functionalized upconversion nanoparticles (UCNPs) for ratiometric detection of multiple antibiotics. The ultraviolet upconversion luminescence (UCL) from UCNPs was significantly quenched by nitrofurazone (NFZ)/nitrofurantoin (NFT), and blue UCL was quenched by doxorubicin (DOX), while red UCL remained unchanged for internal reference. The UCNPs-HYA nanoprobes exhibit excellently sensitive and selective NFZ, NFT and DOX detection in linear range of 2.5-100 μM, 2.5-80 μM, and 2.5-200 μM with the LOD at 0.28 μM (55 μg/kg), 0.20 μM (48 μg/kg) and 0.17 μM (97 μg/kg), respectively. The nanoprobes achieved detecting real samples of NFZ in lake water, liquid milk and chicken meat with satisfactory results, and UCL bioimaging of DOX in HeLa cells. The UCNPs-HYA ratiometric nanoprobes are promising for food samples detection and potential biosensing in the cellular environment.

Influence of surface modification and size of lanthanide-doped upconverting nanoparticles on wheat seedlings

In recent years, nanotechnology has found widespread applications in environmental monitoring, medical applications, plant fertilisers, cosmetics and others. Therefore, it is important to study nanomaterials' influence and subsequent risks to the environment and organisms (from production to disposal). Therefore, in the present study, the toxic effects of two surface modifications (poly (ethylene glycol)-neridronate, PEG-Ner and poly (acrylic acid), PAA) in comparison to unmodified, 26 nm- and 52 nm-sized core@shell lanthanide-doped upconverting nanoparticles (UCNPs, NaYF4:Yb3+,Er3+@NaYF4) were analysed. Wheat seedlings (Triticum aestivum L.) were chosen as a model organism since this species is one of the most widely cultivated crops. The influence of UCNPs (at concentrations of 0, 10, 50, and 100 μg/mL) on germination percentage, germination rate and growth was studied based on morphological parameters such as root number, root and hypocotyl length, and root and hypocotyl mass. In addition, an assay based on Evans blue staining was conducted to analyse damaged cell membranes and cell death. The type, size and concentration of UCNPs influenced the growth but not the germination of wheat. 52-nm-sized ligand-free UCNPs and the 26-nm-sized UCNPs/PAA decreased plant growth. Moreover, the ligand-free 26-nm-sized UCNPs interacted with the root cell membranes of seedlings. No significant changes were observable regarding viability (tetrazolium chloride reduction assay), oxidative stress and electrolyte leakage from root cells in plants incubated with ligand-free 26-nm-sized UCNPs. Overall, we have shown that the ligand-free UCNPs (of both sizes) had the strongest toxic effect; PAA-modified UCNPs were toxic only at smaller sizes and PEG-Ner-modified UCNPs had no toxic impact. Therefore, PEG-Ner was identified as the safest surface compound among the UCNPs investigated in the study, which may neutralise the harmful effects of nanoparticles on plants.

Recent advances in rare earth ion-doped upconversion nanomaterials: From design to their applications in food safety analysis

The misuse of chemicals in agricultural systems and food production leads to an increase in contaminants in food, which ultimately has adverse effects on human health. This situation has prompted a demand for sophisticated detection technologies with rapid and sensitive features, as concerns over food safety and quality have grown around the globe. The rare earth ion-doped upconversion nanoparticle (UCNP)-based sensor has emerged as an innovative and promising approach for detecting and analyzing food contaminants due to its superior photophysical properties, including low autofluorescence background, deep penetration of light, low toxicity, and minimal photodamage to the biological samples. The aim of this review was to discuss an outline of the applications of UCNPs to detect contaminants in food matrices, with particular attention on the determination of heavy metals, pesticides, pathogenic bacteria, mycotoxins, and antibiotics. The review briefly discusses the mechanism of upconversion (UC) luminescence, the synthesis, modification, functionality of UCNPs, as well as the detection principles for the design of UC biosensors. Furthermore, because current UCNP research on food safety detection is still at an early stage, this review identifies several bottlenecks that must be overcome in UCNPs and discusses the future prospects for its application in the field of food analysis.

A Comprehensive Review on Upconversion Nanomaterials-Based Fluorescent Sensor for Environment, Biology, Food and Medicine Applications

Near-infrared-excited upconversion nanoparticles (UCNPs) have multicolor emissions, a low auto-fluorescence background, a high chemical stability, and a long fluorescence lifetime. The fluorescent probes based on UCNPs have achieved great success in the analysis of different samples. Here, we presented the research results of UCNPs probes utilized in analytical applications including environment, biology, food and medicine in the last five years; we also introduced the design and construction of upconversion optical sensing platforms. Future trends and challenges of the UCNPs used in the analytical field have also been discussed with particular emphasis.

A Novel Dual-Emission Fluorescence Probe Based on CDs and Eu3+ Functionalized UiO-66-(COOH)2 Hybrid for Visual Monitoring of Cu2

In this work, CDs@Eu-UiO-66(COOH)₂ (denoted as CDs-F2), a fluorescent material made up of carbon dots (CDs) and a Eu³⁺ functionalized metal-organic framework, has been designed and prepared via a post-synthetic modification method. The synthesized CDs-F2 presents dual emissions at 410 nm and 615 nm, which can effectively avoid environmental interference. CDs-F2 exhibits outstanding selectivity, great sensitivity, and good anti-interference for ratiometric sensing Cu²⁺ in water. The linear range is 0-200 µM and the limit of detection is 0.409 µM. Interestingly, the CDs-F2's silicon plate achieves rapid and selective detection of Cu²⁺. The change in fluorescence color can be observed by the naked eye. These results reveal that the CDs-F2 hybrid can be employed as a simple, rapid, and sensitive fluorescent probe to detect Cu²⁺. Moreover, the possible sensing mechanism of this dual-emission fluorescent probe is discussed in detail.

Upconversion Nanomaterials in Bioimaging and Biosensor Applications and Their Biological Response

In recent decades, upconversion nanomaterials (UCNMs) have attracted considerable research interest because of their unique optical properties, such as large anti-Stokes shifts, sharp emissions, non-photobleaching, and long lifetime. These unique properties make them ideal candidates for unified applications in biomedical fields, including drug delivery, bioimaging, biosensing, and photodynamic therapy for specific cancers. This review describes the general mechanisms of upconversion, synthesis methods, and potential applications in biology and their biological responses. Additionally, the biological toxicity of UCNMs is explained and summarized with the associated intracellular association mechanisms. Finally, the prospects and future challenges of UCNMs at the clinical level in biological applications are described, along with a summary of opportunity for biological as well as clinical applications of UCNMs.

"Off-On" typed upconversion fluorescence resonance energy transfer probe for the determination of Cu2+ in tap water

Detection of copper plays a prominent role in the environmental protection and human health. Herein, we firstly design and construct an "off-on" upconversion fluorescence resonance energy transfer (UFRET) probe with low toxicity for the Cu²⁺ determination by using NaYF₄: Yb³⁺, Er³⁺ upconversion nanoparticles (UCNPs) and Au NPs. UCNPs with positive charge and Au NPs with negative charge are respectively employed as the donor and acceptor, and bound together to form UFRET probe. The upconversion fluorescence quenching of UCNPs occurs by Au NPs through FRET (defined as "off" state). When Cu²⁺ exists in samples, Cu²⁺ reacts with 4-mercaptobenzoic acid (4-MBA) capped on the surface of Au NPs to make Au NPs detach from UCNPs, leading to the termination of FRET and the recovery of upconversion fluorescence (defined as "on" state). "Off-on" typed UFRET probe has excellent sensing performances, including linear range of 0.02-1 μM Cu²⁺ concentration, the limit of detection of 18.2 nM, high selectivity to Cu²⁺ and good recovery. The probe has been successfully used to determine Cu²⁺ in spiked tap water with satisfactory results. The probe will provide theoretical and technical support for the design of new sensitive heavy metal ion detection probe.

A Simple Colorimetric Assay for Sensitive Cu2+ Detection Based on the Glutathione-Mediated Etching of MnO2 Nanosheets

In this paper, we developed a quick, economical and sensitive colorimetric strategy for copper ions (Cu²⁺) quantification via the redox response of MnO₂ nanosheets with glutathione (GSH). This reaction consumed MnO₂ nanosheets, which acted as a catalyst for the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB). In the presence of Cu²⁺, the GSH was catalyzed to GSSG (oxidized glutathione), and the solution changed from colorless to deep blue. Under the optimum conditions, the absorption signal of the oxidized product (oxTMB) became proportional to Cu²⁺ concentration in the range from 10 to 300 nM with a detection limit of 6.9 nM. This detection system showed high specificity for Cu²⁺. Moreover, the system has been efficaciously implemented for Cu²⁺ detection in actual tap water samples. The layered-nanostructures of MnO₂ nanosheets make it possess high chemical and thermal stability. TMB can be quickly oxidized within 10 min by the catalyzing of MnO₂ nanosheets with high oxidase-like activity. There is no need of expensive reagents, additional H₂O₂ and complicated modification processes during the colorimetric assay. Therefore, the strategy primarily based on MnO₂ nanosheets is promising for real-time, rapid and highly sensitive detection of Cu²⁺ under practical conditions.

Upconversion luminescent nanomaterials: A promising new platform for food safety analysis

Foodborne diseases have become a significant threat to public health worldwide. Development of analytical techniques that enable fast and accurate detection of foodborne pathogens is significant for food science and safety research. Assays based on lanthanide (Ln) ion-doped upconversion nanoparticles (UCNPs) show up as a cutting edge platform in biomedical fields because of the superior physicochemical features of UCNPs, including negligible autofluorescence, large signal-to-noise ratio, minimum photodamage to biological samples, high penetration depth, and attractive optical and chemical features. In recent decades, this novel and promising technology has been gradually introduced to food safety research. Herein, we have reviewed the recent progress of Ln³⁺-doped UCNPs in food safety research with emphasis on the following aspects: 1) the upconversion mechanism and detection principles; 2) the history of UCNPs development in analytical chemistry; 3) the in-depth state-of-the-art synthesis strategies, including synthesis protocols for UCNPs, luminescence, structure, morphology, and surface engineering; 4) applications of UCNPs in foodborne pathogens detection, including mycotoxins, heavy metal ions, pesticide residue, antibiotics, estrogen residue, and pathogenic bacteria; and 5) the challenging and future perspectives of using UCNPs in food safety research. Considering the diversity and complexity of the foodborne harmful substances, developing novel detections and quantification techniques and the rigorous investigations about the effect of the harmful substances on human health should be accelerated.