Fate of Listeria monocytogenes in the Presence of Resident Cheese Microbiota on Common Packaging Materials

Comparison of Roka Atlas® System Performance and Health Canada Reference Method for Listeria Detection From Plastic, Sealed Concrete, and Stainless-Steel Surface Samples

BACKGROUND

There is a high demand in the food industry and in public health for rapid automated methods capable of high-volume sample processing.

OBJECTIVE

In an unpaired study, Roka Atlas® System performance was compared with Health Canada reference method MFHPB-30 for Listeria spp. (LSP Roka assay) and Listeria monocytogenes (LmG2 Roka Assay) detection on plastic (PL), sealed concrete (SC), and stainless-steel (SS) surfaces (45 samples each per candidate or reference method).

METHODS

Seeking shorter enrichment time for the candidate method, R2 medium pre-enrichment for 14, 16, and 24 h at 35°C was combined with the Roka assay. Listeria welshimeri, L. innocua, and L. monocytogenes were employed to individually inoculate each of the three surfaces, with two competing microorganisms within the 10-100-fold higher concentration range.

RESULTS

False negative, false positive, sensitivity, and specificity were 0, 0, 100, and 100%, respectively, for the plastic, sealed concrete, and stainless-steel surfaces, regardless of inoculation level (high, low, and uninoculated) and enrichment time. Candidate method detected 10, 7, and 9 true positives, versus 10, 6, and 10 by the reference method in individually inoculated SS, PL, and SC, respectively.

CONCLUSIONS

Probability of detection for all the three surfaces for the Roka Atlas System was comparable to the reference method in this unpaired study.

HIGHLIGHTS

The Roka Atlas System detected targets after as little as 14 h enrichment. Surface type did not negatively affect assay sensitivity or specificity. The Roka Atlas System was comparable to the reference method.

Biofilm formation and desiccation survival of Listeria monocytogenes with microbiota on mushroom processing surfaces and the effect of cleaning and disinfection

Microbial multispecies communities consisting of background microbiota and Listeria monocytogenes could be established on materials used in food processing environments. The presence, abundance and diversity of the strains within these microbial multispecies communities may be affected by mutual interactions and differences in resistance towards regular cleaning and disinfection (C&D) procedures. Therefore, this study aimed to characterize the growth and diversity of a L. monocytogenes strain cocktail (n = 6) during biofilm formation on polyvinyl chloride (PVC) and stainless steel (SS) without and with the presence of a diverse set of background microbiota (n = 18). L. monocytogenes and background microbiota strains were isolated from mushroom processing environments and experiments were conducted in simulated mushroom processing environmental conditions using mushroom extract as growth medium and ambient temperature (20 °C) as culturing temperature. The L. monocytogenes strains applied during monospecies biofilm incubation formed biofilms on both PVC and SS coupons, and four cycles of C&D treatment were applied with a chlorinated alkaline cleaning agent and a disinfection agent based on peracetic acid and hydrogen peroxide. After each C&D treatment, the coupons were re-incubated for two days during an incubation period for 8 days in total, and C&D resulted in effective removal of biofilms from SS (reduction of 4.5 log CFU/cm2 or less, resulting in counts below detection limit of 1.5 log CFU/cm2 after every C&D treatment), while C&D treatments on biofilms formed on PVC resulted in limited reductions (reductions between 1.2 and 2.4 log CFU/cm2, which equals a reduction of 93.7 % and 99.6 %, respectively). Incubation of the L. monocytogenes strains with the microbiota during multispecies biofilm incubation led to the establishment of L. monocytogenes in the biofilm after 48 h incubation with corresponding high L. monocytogenes strain diversity in the multispecies biofilm on SS and PVC. C&D treatments removed L. monocytogenes from multispecies biofilm communities on SS (reduction of 3.5 log CFU/cm2 or less, resulting in counts below detection limit of 1.5 log CFU/cm2 after every C&D treatment), with varying dominance of microbiota species during different C&D cycles. However, C&D treatments of multispecies biofilm on PVC resulted in lower reductions of L. monocytogenes (between 0.2 and 2.4 log CFU/cm2) compared to single species biofilm, and subsequent regrowth of L. monocytogenes and stable dominance of Enterobacteriaceae and Pseudomonas. In addition, planktonic cultures of L. monocytogenes were deposited and desiccated on dry surfaces without and with the presence of planktonic background microbiota cultures. The observed decline of desiccated cell counts over time was faster on SS compared to PVC. However, the application of C&D resulted in counts below the detection limit of 1.7 log CFU/coupon on both surfaces (reduction of 5.9 log CFU/coupon or less). This study shows that L. monocytogenes is able to form single and multispecies biofilms on PVC with high strain diversity following C&D treatments. This highlights the need to apply more stringent C&D regime treatments for especially PVC and similar surfaces to efficiently remove biofilm cells from food processing surfaces.

Understanding the Effect of Ozone on Listeria monocytogenes and Resident Microbiota of Gorgonzola Cheese Surface: A Culturomic Approach

The occurrence of Listeria monocytogenes on Gorgonzola cheese surface was reported by many authors, with risks arising from the translocation of the pathogen inside the product during cutting procedures. Among the novel antimicrobial strategies, ozone may represent a useful tool against L. monocytogenes contamination on Gorgonzola cheese rind. In this study, the effect of gaseous ozone (2 and 4 ppm for 10 min) on L. monocytogenes and resident microbiota of Gorgonzola cheese rind stored at 4 °C for 63 days was evaluated. A culturomic approach, based on the use of six media and identification of colonies by MALDI-TOF MS, was used to analyse variations of resident populations. The decrease of L. monocytogenes was less pronounced in ozonised rinds with final loads of ~1 log CFU/g higher than controls. This behaviour coincided with a lower maximum population density of lactobacilli in treated samples at day 28. No significant differences were detected for the other microbial determinations and resident microbiota composition among treated and control samples. The dominant genera were Candida, Carnobacterium, Staphylococcus, Penicillium, Saccharomyces, Aerococcus, Yarrowia, and Enterococcus. Based on our results, ozone was ineffective against L. monocytogenes contamination on Gorgonzola rinds. The higher final L. monocytogenes loads in treated samples could be associated with a suppressive effect of ozone on lactobacilli, since these are antagonists of L. monocytogenes. Our outcomes suggest the potential use of culturomics to study the ecosystems of complex matrices, such as the surface of mould and blue-veined cheeses.

Biofilm formation and genomic features of Listeria monocytogenes strains isolated from meat and dairy industries located in Piedmont (Italy)

Listeria monocytogenes is considered a major challenge for the food industry as it can persist for long periods in food processing plants by forming biofilms. The aims of this study were: i) to assess the biofilm producing ability of 57 Listeria monocytogenes isolates previously subjected to whole-genome sequencing (WGS); ii) to compare the levels of biofilm formation with the presence or absence of biofilm associated genes. To determine the presence or absence of a known set of biofilm associated genes, a comparative genomic analysis was performed on each strain. Among Listeria monocytogenes isolates, 58 %, 38.5 % and 3.5 % exhibited weak, moderate or strong biofilm production, respectively. No difference in biofilm production was observed between food and environmental isolates. The percentage of Listeria monocytogenes strains isolated from meat products (57 %) classified as moderate or strong biofilm producers was higher than the percentage obtained for strains isolated from dairy products (28 %). The presence of the Stress Survival Islet 1, the arsD stress gene and the truncated inlA protein was significantly associated with increased levels of biofilm. Combining biofilm phenotype with molecular and genotyping data may provide the opportunity to better understand the relationship between genes linked to biofilm formation in Listeria monocytogenes.

Effect of Breeding Techniques and Prolonged Post Dry Aging Maturation Process on Biomolecule Levels in Raw Buffalo Meat

Recently, several concerns have been expressed on red meat quality and consumption. The aims of this study were to evaluate the influence of different breeding techniques and a prolonged post dry aging (PDA) maturation process on biomolecules level in raw buffalo meat. In the first experiment, two groups of animals were maintained with different space availability (15 vs. 10 m²/animal) for 90 days and biomolecules content was evaluated. In experiment 2, two diets (with or without ryegrass green forage) were used to assess the concentration of these biomolecules. Finally, in experiment 3, the meat of the animals that showed the highest content of biomolecules was chosen to assess the influence of the PDA maturation process. Buffaloes reared at 15 m² showed a significantly (p < 0.05) higher content of the considered biomolecules compared with their counterparts. Similarly, buffaloes fed green forage showed higher content of biomolecules (p < 0.05) compared with the control group. The meat of the animals bred at 15 m² and fed green forage showed a significant (p < 0.01) increase of biomolecules content during the PDA maturation process up to 60 days without influence microbiological profile in terms of total aerobic bacterial counts, yeasts, and molds. In conclusion, breeding techniques and PDA maturation system could enhance biomolecules levels in terms of quality, without affect health standards.

Co-Occurrence of Listeria spp. and Spoilage Associated Microbiota During Meat Processing Due to Cross-Contamination Events

A large part of foodborne outbreaks related to Listeria monocytogenes are linked to meat and meat products. Especially, recontamination of meat products and deli-meat during slicing, packaging, and repackaging is in the focus of food authorities. In that regard, L. monocytogenes persistence in multi-species biofilms is one major issue, since they survive elaborate cleaning and disinfection measures. Here, we analyzed the microbial community structure throughout a meat processing facility using a combination of high-throughput full-length 16S ribosomal RNA (rRNA) gene sequencing and traditional microbiological methods. Samples were taken at different stages during meat cutting as well as from multiple sites throughout the facility environment to capture the product and the environmental associated microbiota co-occurring with Listeria spp. and L. monocytogenes. The listeria testing revealed a widely disseminated contamination (50%; 88 of 176 samples were positive for Listeria spp. and 13.6%; 24 of 176 samples were positive for L. monocytogenes). The pulsed-field gel electrophoresis (PFGE) typing evidenced 14 heterogeneous L. monocytogenes profiles with PCR-serogroup 1/2a, 3a as most dominant. PFGE type MA3-17 contributed to the resilient microbiota of the facility environment and was related to environmental persistence. The core in-house microbiota consisted mainly of the genera Acinetobacter, Pseudomonas, Psychrobacter (Proteobacteria), Anaerobacillus, Bacillus (Firmicutes), and Chryseobacterium (Bacteroidota). While the overall microbial community structure clearly differed between product and environmental samples, we were able to discern correlation patterns regarding the presence/absence of Listeria spp. in both sample groups. Specifically, our longitudinal analysis revealed association of Listeria spp. with known biofilm-producing Pseudomonas, Acinetobacter, and Janthinobacterium species on the meat samples. Similar patterns were also observed on the surface, indicating dispersal of microorganisms from this multispecies biofilm. Our data provided a better understanding of the built environment microbiome in the meat processing context and promoted more effective options for targeted disinfection in the analyzed facility.

Interactions between L. monocytogenes and P. fluorescens in Dual-Species Biofilms under Simulated Dairy Processing Conditions

In dairy processing environments, many bacterial species adhere and form biofilms on surfaces and equipment, leading to foodborne illness and food spoilage. Among them, Listeria monocytogenes and Pseudomonas spp. could be present in mixed-species biofilms. This study aimed to evaluate the interactions between L. monocytogenes and P. fluorescens in biofilms simulating dairy processing conditions, as well as the capability of P. fluorescens in co-culture to produce the blue pigment in a Ricotta-based model system. The biofilm-forming capability of single- and mixed-cultures was evaluated on polystyrene (PS) and stainless steel (SS) surfaces at 12 °C for 168 h. The biofilm biomass was measured, the planktonic and sessile cells and the carbohydrates in biofilms were quantified. The biofilms were also observed through Confocal Laser Scanning Microscopy analysis. Results showed that only P. fluorescens was able to form biofilms on PS. Moreover, in dual-species biofilms at the end of the incubation time (168 h at 12 °C), a lower biomass compared to P. fluorescens mono-species was observed on PS. On SS, the biofilm cell population of L. monocytogenes was higher in the dual-species than in mono-species, particularly after 48 h. Carbohydrates quantity in the dual-species system was higher than in mono-species and was revealed also at 168 h. The production of blue pigment by P. fluorescens was revealed both in single- and co-culture after 72 h of incubation (12 °C). This work highlights the interactions between the two species, under the experimental conditions studied in the present research, which can influence biofilm formation (biomass and sessile cells) but not the capability of P. fluorescens to produce blue pigment.