Emerging Concern for Silver Nanoparticle Resistance in Acinetobacter baumannii and Other Bacteria

Synthesis and Antibacterial Studies of Silver Loaded TiO2 Electrospun Nanofibers Against E. coli by Fluorescence Spectroscopy and Microscopy

In healthcare, bacterial infections always remain a critical challenge. In this study, pristine and Ag-TiO2 nanofibers (NFs) with varying silver (Ag) concentration (2wt.%, 4wt.%, 6wt.% and 8wt.%) were prepared by electrospinning, followed by calcination at 500 °C for 3 h. Morphological characterization revealed the formation of one-dimensional NFs with mean diameter 83.06 to 25.80 nm, depending on the Ag loading. The antibacterial activities were investigated using conventional methods (well diffusion, colony forming units counting) and advanced techniques (Confocal laser scanning fluorescence microscopy, Scanning electron microscopy and Fluorescence spectroscopy). The results from antibacterial studies have revealed that sample with 8wt.% Ag-TiO2 exhibited the most significant antibacterial effect as evidenced by marked reduction in CFUs, almost complete quenching of fluorescence emission intensity and perforated bacterial membranes and cellular debris.

Current State and Advances in Antimicrobial Strategies for Burn Wound Dressings: From Metal-Based Antimicrobials and Natural Bioactive Agents to Future Perspectives

Burn wounds represent a complex clinical challenge, primarily due to their high susceptibility to infections and the frequent formation of the biofilm, which significantly hinder the healing process. Therefore, effective infection prevention and management are critical components of burn wound care. This review provides a comprehensive overview of the current and emerging antimicrobial strategies in burn management, with a particular focus on alternative approaches to conventional antiseptics and antibiotics. This manuscript highlights the role of metals and metal-based agents, including silver, zinc oxide, and copper compounds, alongside plant-derived bioactive substances such as aloe vera, marigold, and turmeric. Additionally, the potential of antimicrobial peptides and probiotics as innovative therapeutic options is explored, emphasizing their antimicrobial, anti-inflammatory, and pro-healing properties. Finally, this review presents an analysis of recent patents in the field of burn wound care, offering insights into current trends and future directions in the development of advanced wound dressings. By addressing both established and novel strategies, this review aims to provide a valuable resource for clinicians, researchers, and innovators seeking to improve outcomes in burn wound management.

Hydrogel Containing Biogenic Silver Nanoparticles and Origanum vulgare Essential Oil for Burn Wounds: Antimicrobial Efficacy Using Ex Vivo and In Vivo Methods Against Multidrug-Resistant Microorganisms

Background/Objectives: Wounds from burns are susceptible to infections, allowing multidrug-resistant microorganisms to complicate treatments and patient recovery. This highlights the development of new strategies to control these microorganisms. This work evaluated the antibacterial activity of hydrogels containing biogenic silver nanoparticles (bio-AgNP) and Origanum vulgare essential oil (OEO) against multidrug-resistant bacteria. Methods: The formulations were subjected to organoleptic, pharmacotechnical, and stability characterization and antimicrobial activity assessment by time-kill tests and alternative methods, an ex vivo model using porcine skin, and an in vivo model using Galleria mellonella. Results: All hydrogels maintained their stability after the thermal stress. The hydrogel containing bio-AgNP + OEO 1% (HAgNP + OEO1) presented bactericidal effectiveness, within 2 h, against both Gram-positive and Gram-negative multidrug-resistant bacteria in the time-kill test. For alternative testing, HAgNP + OEO1 was compared with 1% silver sulfadiazine (SS) and the base formulation. In the ex vivo test, both HAgNP + OEO1 and SS treatments showed a similar reduction in superficial washing of the burn for S. aureus 999, while for P. aeruginosa, the reduction was more expressive for SS treatment. In the burn tissue, HAgNP + OEO1 treatment was more effective against S. aureus 999, while for P. aeruginosa 1461, both formulations were similarly effective. In the Galleria mellonella test, survival rates after 48 h were 84% for the control group (base) and 50% for both HAgNP + OEO1 and SS treatment groups. Conclusions: This study demonstrates that the hydrogel combining antimicrobials is effective against multidrug-resistant microorganisms, offering a promising alternative for the treatment of infected burns.

Silver Nanoparticles: A Versatile Tool Against Infectious and Non-Infectious Diseases

Silver nanoparticles possess remarkable properties that render them highly beneficial for medical applications in both infectious and non-infectious diseases. Among their most renowned attributes is their antimicrobial activity. They have demonstrated efficacy against a wide range of bacteria, fungi, protozoa, and viruses. Additionally, the antitumor and anti-diabetic properties of silver nanoparticles, along with their ability to promote wound healing and their application as biosensors, underscore their therapeutic potential for various non-infectious conditions. As silver nanoparticles are employed for medical purposes, their potential toxicity must be considered. While silver nanoparticles present a promising alternative in the therapeutic domain, further research is needed to elucidate their precise mechanisms of action, optimize their efficacy, and mitigate any potential health risks associated with their use.

An Australian perspective on clinical, economic and regulatory considerations in emerging nanoparticle therapies for infections

Antimicrobial resistance (AMR) poses a growing global health threat. Nanomedicine, combined with drug repurposing, may help extend the effective lifespan of current and new antimicrobials. This review, presents an Australian perspective on nanotechnology-based therapies, highlighting scientific and clinical challenges. Early consideration of the potential barriers to market access may help to accelerate research translation, regulatory approval and patient access to nano-antimicrobial (NAM) drugs for resistant pathogens, not only in Australia, but globally.

Advancing food safety with biogenic silver nanoparticles: Addressing antimicrobial resistance, sustainability, and commercial viability

The escalating threat of antimicrobial resistance (AMR), particularly among foodborne pathogens such as Escherichia coli, Salmonella enterica, and Listeria monocytogenes, necessitates innovative solutions beyond conventional antimicrobials. Silver nanoparticles (AgNPs) have garnered significant attention for their broad-spectrum antimicrobial efficacy, ability to target multidrug-resistant strains, and versatile applications across the food sector. This review critically examines AgNPs' integration into food safety strategies, including their roles in antimicrobial food packaging, agricultural productivity enhancement, and livestock disease mitigation. Key advancements in eco-friendly synthesis methods, leveraging algae, agricultural byproducts, and microbial systems, are highlighted as pathways to address scalability, sustainability, and cost constraints. However, the potential risks of silver bioaccumulation, environmental toxicity, and regulatory challenges present significant barriers to their widespread implementation. By reviewing cutting-edge research, this review provides a comprehensive analysis of AgNP efficacy, safety, and commercial viability, proposing a roadmap for overcoming current limitations. It calls for collaborative, interdisciplinary efforts to bridge technological, ecological, and regulatory gaps, positioning AgNPs as a transformative solution for combating AMR and ensuring global food security.

Understanding Bacterial Resistance to Heavy Metals and Nanoparticles: Mechanisms, Implications, and Challenges

Antimicrobial resistance is a global health problem as it contributes to high mortality rates in several infectious diseases. To address this issue, engineered nanoparticles/nano-formulations of antibiotics have emerged as a promising strategy. Nanoparticles are typically defined as materials with dimensions up to 100 nm and are made of different materials such as inorganic particles, lipids, polymers, etc. They are widely dispersed in the environment through various consumer products, and their clinical applications are diverse, ranging from contrast agents in imaging to carriers for gene and drug delivery. Nanoparticles can also act as antimicrobial agents either on their own or in combination with traditional antibiotics to produce synergistic effects, earning them the label of "next-generation therapeutics." They have also shown great effectiveness against multidrug-resistant pathogens responsible for nosocomial infections. However, overexposure or prolonged exposure to sublethal doses of nanoparticles can promote the development of resistance in human pathogens. The resistance can arise from various factors such as genetic mutation, horizontal gene transfer, production of reactive oxygen species, changes in the outer membrane of bacteria, efflux-induced resistance, cross-resistance from intrinsic antibiotic resistance determinants, plasmid-mediated resistance, and many more. Continuous exposure to nanoparticles can also transform an antibiotic-susceptible bacterial pathogen into multidrug resistance. Considering all these, the current review focuses on the mode of action of different heavy metals and nanoparticles and possible mechanisms through which bacteria attain resistance towards these heavy metals and nanoparticles.

Silver Nanoparticles as Antimicrobial Agents in Veterinary Medicine: Current Applications and Future Perspectives

Silver nanoparticles (AgNPs) have gained significant attention in veterinary medicine due to their antimicrobial properties and potential therapeutic applications. Silver has long been recognized for its ability to combat a wide range of pathogens, and when engineered at the nanoscale, silver's surface area and reactivity are greatly enhanced, making it highly effective against bacteria, viruses, and fungi. This narrative review aimed to summarize the evidence on the antimicrobial properties of AgNPs and their current and potential clinical applications in veterinary medicine. The antimicrobial action of AgNPs involves several mechanisms, including, among others, the release of silver ions, disruption of cell membranes and envelopes, induction of oxidative stress, inhibition of pathogens' replication, and DNA damage. Their size, shape, surface charge, and concentration influence their efficacy against bacteria, viruses, and fungi. As a result, the use of AgNPs has been explored in animals for infection prevention and treatment in some areas, such as wound care, coating of surgical implants, animal reproduction, and airway infections. They have also shown promise in preventing biofilm formation, a major challenge in treating chronic bacterial infections. Additionally, AgNPs have been studied for their potential use in animal feed as a supplement to enhance animal health and growth. Research suggested that AgNPs could stimulate immune responses and improve the gut microbiota of livestock, potentially reducing the need for antibiotics in animal husbandry. Despite their promising applications, further research is necessary to fully understand the safety, efficacy, and long-term effects of AgNPs on animals, humans, and the environment.

Efficacy of Dialkylcarbamoylchloride (DACC)-Impregnated Dressings in Surgical Wound Management: A Review

Surgical site infections (SSIs) are a significant challenge in postoperative care, leading to increased morbidity, extended hospital stays, and elevated healthcare costs. Traditional antimicrobial dressings, such as those containing silver or iodine, have limitations, including cytotoxicity and the potential for antimicrobial resistance. Dialkylcarbamoyl chloride (DACC)-impregnated dressings offer a novel approach, employing a physical mechanism to bind and remove bacteria without the use of chemical agents, thereby reducing the risk of resistance. This review summarizes current evidence on the efficacy of DACC dressings in preventing SSIs and promoting wound healing. Findings from multiple studies indicate that DACC dressings reduce bacterial burden and SSI rates across various surgical procedures, including cesarean sections and vascular surgeries. Additionally, DACC dressings demonstrate potential in managing hard-to-heal wounds, such as diabetic foot ulcers, by reducing bacterial load and biofilm formation. Furthermore, they present advantages in antimicrobial stewardship and cost-effectiveness by minimizing the need for antibiotics and decreasing overall healthcare expenses. However, the current literature is limited by small sample sizes, methodological weaknesses, heterogeneity in study designs, and a lack of long-term data. Future research should focus on high-quality randomized controlled trials across diverse surgical populations, comprehensive cost-effectiveness analyses, and long-term outcomes to establish the full clinical impact of DACC dressings. With further validation, DACC-impregnated dressings could become a critical tool in sustainable postoperative wound care.

Genetic determinants of silver nanoparticle resistance and the impact of gamma irradiation on nanoparticle stability

BACKGROUND

One of the main issues facing public health with microbial infections is antibiotic resistance. Nanoparticles (NPs) are among the best alternatives to overcome this issue. Silver nanoparticle (AgNPs) preparations are widely applied to treat multidrug-resistant pathogens. Therefore, there is an urgent need for greater knowledge regarding the effects of improper and excessive use of these medications. The current study describes the consequences of long-term exposure to sub-lethal concentrations of AgNPs on the bacterial sensitivity to NPs and the reflection of this change on the bacterial genome.

RESULTS

Chemical methods have been used to prepare AgNPs and gamma irradiation has been utilized to produce more stable AgNPs. Different techniques were used to characterize and identify the prepared AgNPs including UV-visible spectrophotometer, Fourier Transform Infrared (FT-IR), Dynamic light scattering (DLS), and zeta potential. Transmission electron microscope (TEM) and Scanning electron microscope (SEM) showed 50-100 nm spherical-shaped AgNPs. Eleven gram-negative and gram-positive bacterial isolates were collected from different wound infections. The minimum inhibitory concentrations (MICs) of AgNPs against the tested isolates were evaluated using the agar dilution method. This was followed by the induction of bacterial resistance to AgNPs using increasing concentrations of AgNPs. All isolates changed their susceptibility level to become resistant to high concentrations of AgNPs upon recultivation at increasing concentrations of AgNPs. Whole genome sequencing (WGS) was performed on selected susceptible isolates of gram-positive Staphylococcus lentus (St.L.1), gram-negative Klebsiella pneumonia (KP.1), and their resistant isolates St.L_R.Ag and KP_R.Ag to detect the genomic changes and mutations.

CONCLUSIONS

For the detection of single-nucleotide polymorphisms (SNPs) and the identification of all variants (SNPs, insertions, and deletions) in our isolates, the Variation Analysis Service tool available in the Bacterial and Viral Bioinformatics Resource Center (BV-BRC) was used. Compared to the susceptible isolates, the AgNPs-resistant isolates St.L_R.Ag and KP_R.Ag had unique mutations in specific efflux pump systems, stress response, outer membrane proteins, and permeases. These findings might help to explain how single-nucleotide variants contribute to AgNPs resistance. Consequently, strict regulations and rules regarding the use and disposal of nano waste worldwide, strict knowledge of microbe-nanoparticle interaction, and the regulated disposal of NPs are required to prevent pathogens from developing nanoparticle resistance.

The antibacterial capabilities of alginate encapsulated lemon essential oil nanocapsules against multi-drug-resistant Acinetobacter baumannii

Controlling microbial pollutants is a significant public health concern as they cause several chronic microbial infections and illnesses. In recent years, essential oils (EOs) have become intriguing alternatives for synthetic antimicrobials due to their biodegradability, natural source extraction, and strong antibacterial properties. The bactericidal properties of alginate containing lemon essential oil were examined in this investigation. Following the screening of the MDR strains, the morphological properties of the produced nanoparticles were examined using SEM, DLS, and FTIR. Additionally, the durability, effectiveness, and drug dispersion of encapsulation were assessed. Bacterial virulence factor gene amounts were measured using Q-real-time PCR. Concurrently, the cytotoxic effect of the nanomaterials was evaluated using MTT techniques. Nanoparticles of lemon essential oil encapsulated in alginate, measuring 500 ± 19.32 nm in size, with entrapment efficiency of 77.73 ± 1.78% and were stable for 60 days at 4 °C. Alginate encapsulated with lemon essential oil nanoparticles (ALN) exhibited potent antibacterial qualities, according to the biological investigation. Their ability to decrease the transcription of bacterial virulence genes at least statistically significantly (P ≤ 0.05) served as evidence for this. Between 1.56 and 100 µg/mL (P ≤ 0.01), ALN exhibited lower cytotoxicity against CCD841CoN than free lemon essential oil. The findings show that ALN nanoparticles have the potential to be a breakthrough in the fight against highly resistant illnesses. ALN nanoparticles' potent antibacterial efficacy against MDR strains of Acinetobacter baumannii may inspire new directions in antibacterial research.

Effect of Selenium, Copper and Manganese Nanocomposites in Arabinogalactan Matrix on Potato Colonization by Phytopathogens Clavibacter sepedonicus and Pectobacterium carotovorum

The effect of chemically synthesized nanocomposites (NCs) of selenium (Se/AG NC), copper oxide (Cu/AG NC) and manganese hydroxide (Mn/AG NC), based on the natural polymer arabinogalactan (AG), on the processes of growth, development and colonization of potato plants in vitro was studied upon infection with the causative agent of potato blackleg-the Gram-negative bacterium Pectobacterium carotovorum-and the causative agent of ring rot-the Gram-positive bacterium Clavibacter sepedonicus (Cms). It was shown that the infection of potatoes with P. carotovorum reduced the root formation of plants and the concentration of pigments in leaf tissues. The treatment of plants with Cu/AG NC before infection with P. carotovorum stimulated leaf formation and increased the concentration of pigments in them. A similar effect was observed when potatoes were exposed to Mn/AG NC, and an increase in growth and root formation was also observed. The infection of plants with Cms inhibited plant growth. Treatment with each of the NCs mitigated this negative effect of the phytopathogen. At the same time, Se/AG and Mn/AG NCs promoted leaf formation. The Se/AG NC increased the biomass of Cms-infected plants. The treatment of plants with NCs before infection showed a decrease in the intensity of the colonization of plants by bacteria. The Se/AG NC had the maximum effect, which is probably due to its high antioxidant capacity. Thus, the NCs are able to mitigate the negative effects of bacterial phytopathogens on vegetation and the intensity of colonization by these bacteria during the infection of cultivated plants.

Antimicrobial Feature of Nanoparticles in the Antibiotic Resistance Era: From Mechanism to Application

The growth of nanoscale sciences enables us to define and design new methods and materials for a better life. Health and disease prevention are the main issues in the human lifespan. Some nanoparticles (NPs) have antimicrobial properties that make them useful in many applications. In recent years, NPs have been used as antibiotics to overcome drug resistance or as drug carriers with antimicrobial features. They can also serve as antimicrobial coatings for implants in different body areas. The antimicrobial feature of NPs is based on different mechanisms. For example, the oxidative functions of NPs can inhibit nucleic acid replication and destroy the microbial cell membrane as well as interfere with their cellular functions and biochemical cycles. On the other hand, NPs can disrupt the pathogens' lifecycle by interrupting vital points of their life, such as virus uncoating and entry into human cells. Many types of NPs have been tested by different scientists for these purposes. Silver, gold, copper, and titanium have shown the most ability to inhibit and remove pathogens inside and outside the body. In this review, the authors endeavor to comprehensively describe the antimicrobial features of NPs and their applications for different biomedical goals.

ANTIMICROBIAL WOUND DRESSINGS FOR FULL-THICKNESS INFECTED BURN WOUNDS

ABSTRACT

Infection of wounds delays healing, increases treatment costs, and leads to major complications. Current methods to manage such infections include antibiotic ointments and antimicrobial wound dressings, both of which have significant drawbacks, including frequent reapplication and contribution to antimicrobial resistance. In this work, we developed wound dressings fabricated with a medical-grade polyurethane coating composed of natural plant secondary metabolites, cinnamaldehyde, and alpha-terpineol. Our wound dressings are easy to change and do not adhere to the wound bed. They kill gram-positive and -negative microbes in infected wounds due to the Food and Drug Administration-approved for human consumption components. The wound dressings were fabricated by dip coating. Antimicrobial efficacy was determined by quantifying the bacteria colonies after a 24 h of immersion. Wound healing and bacterial reduction were assessed in an in vivo full-thickness porcine burn model. Our antimicrobial wound dressings showed a > 5-log reduction (99.999%) of different gram-positive and gram-negative bacteria, while maintaining absorbency. In the in vivo porcine burn model, our wound dressings were superior to bacitracin in decreasing bacterial burden during daily changes, without interfering with wound healing. Additionally, the dressings had a significantly lower adhesion to the wound bed. Our antimicrobial wound dressings reduced the burden of clinically relevant bacteria more than commercial antimicrobial wound dressings. In an in vivo infected burn wound model, our coatings performed as well or better than bacitracin. We anticipate that our wound dressings would be useful for the treatment of various types of acute and chronic wounds.

It Takes Two to Make a Thing Go Right: Epistasis, Two-Component Response Systems, and Bacterial Adaptation

Understanding the interplay between genotype and fitness is a core question in evolutionary biology. Here, we address this challenge in the context of microbial adaptation to environmental stressors. This study explores the role of epistasis in bacterial adaptation by examining genetic and phenotypic changes in silver-adapted Escherichia coli populations, focusing on the role of beneficial mutations in two-component response systems (TCRS). To do this, we measured 24-hour growth assays and conducted whole-genome DNA and RNA sequencing on E. coli mutants that confer resistance to ionic silver. We showed recently that the R15L cusS mutation is central to silver resistance, primarily through upregulation of the cus efflux system. However, here we show that this mutation's effectiveness is significantly enhanced by epistatic interactions with additional mutations in regulatory genes such as ompR, rho, and fur. These interactions reconfigure global stress response networks, resulting in robust and varied resistance strategies across different populations. This study underscores the critical role of epistasis in bacterial adaptation, illustrating how interactions between multiple mutations and how genetic backgrounds shape the resistance phenotypes of E. coli populations. This work also allowed for refinement of our model describing the role TCRS genes play in bacterial adaptation by now emphasizing that adaptation to environmental stressors is a complex, context-dependent process, driven by the dynamic interplay between genetic and environmental factors. These findings have broader implications for understanding microbial evolution and developing strategies to combat antimicrobial resistance.

Effects of Metal and Metal Oxide Nanoparticles against Biofilm-Forming Bacteria: A Systematic Review

Biofilm formation by bacteria poses a significant challenge across diverse industries, displaying resilience against conventional antimicrobial agents. Nanoparticles emerge as a promising alternative for addressing biofilm-related issues. This review aims to assess the efficacy of metal and metal oxide nanoparticles in inhibiting or disrupting biofilm formation by various bacterial species. It delineates trends, identifies gaps, and outlines avenues for future research, emphasizing best practices and optimal nanoparticles for biofilm prevention and eradication. Additionally, it underscores the potential of nanoparticles as substitutes for traditional antibiotics in healthcare and combating antibiotic resistance. A systematic literature search, encompassing Web of Science, PubMed, and Google Scholar from 2015 to 2023, yielded 48 publications meeting the review criteria. These studies employed diverse methods to explore the antibacterial activity of nanoparticles against biofilm-forming bacteria strains. The implications of this study are profound, offering prospects for novel antimicrobial agents targeting biofilm-forming bacteria, often resistant to conventional antibiotics. In conclusion, nanoparticles present a promising frontier in countering biofilm-forming bacteria. This review delivers a structured analysis of current research, providing insights into the potential and challenges of nanoparticle utilization against biofilm-related challenges. While nanoparticles exhibit inherent antimicrobial properties with applications spanning healthcare, agriculture, and industries, the review acknowledges limitations such as the narrow scope of tested nanoparticles and the imperative need for extensive research on long-term toxicity and environmental impacts.

Current treatment strategies for targeting virulence factors and biofilm formation in Acinetobacter baumannii

A higher prevalence of Acinetobacter baumannii infections and mortality rate has been reported recently in hospital-acquired infections (HAI). The biofilm-forming capability of A. baumannii makes it an extremely dangerous pathogen, especially in device-associated hospital-acquired infections (DA-HAI), thereby it resists the penetration of antibiotics. Further, the transmission of the SARS-CoV-2 virus was exacerbated in DA-HAI during the epidemic. This review specifically examines the complex interconnections between several components and genes that play a role in the biofilm formation and the development of infections. The current review provides insights into innovative treatments and therapeutic approaches to combat A. baumannii biofilm-related infections, thereby ultimately improving patient outcomes and reducing the burden of HAI.

Study of MIC of silver and zinc oxide nanoparticles, strong and cost-effective antibacterial against biofilm-producing Acinetobacter baumannii in Shiraz, Southwest of Iran

BACKGROUND

Acinetobacter baumannii resistant strains lead to increased mortality, treatment costs, and an increase in the length of hospitalization. Nowadays, nanoparticles are considered a substitute for antibiotics. This study aimed to determine the MIC of Silver (Ag) and Zinc Oxide (ZnO) Nanoparticles (NPs) on Biofilm-Producing Acinetobacter baumannii and determine the relationship between MIC and frequency of efflux pump genes in cutaneous specimens in Shiraz, Southwest Iran in 2021-2022.

METHODS

In this study, specimens were collected from April 2021 to June 2022 at Namazi and Faqihi Hospitals in Shiraz. Investigation of biofilm production in multidrug resistance (MDR) isolates was done by the microtiter plate method. Synthesized nanoparticles were characterized by UV-vis spectrum, X-ray diffraction (XRD), and electron microscopy. The MIC of AgNPs and ZnONPs for isolates was done using the method described in the CLSI guideline (2018). The antibacterial effect of MIC of NPs on inanimate objects was done by colony counts. The prevalence of efflux pump genes (adeR, adeC, adeA, abeM, adeK, adeI) was also investigated by PCR technique.

RESULTS

The highest ceftriaxone resistance (68%) and lowest colistin resistance (7%) were identified. 57% of isolates were MDR. In addition, 71.9% could produce biofilm and 28.1% of isolates could not produce biofilm. The average size of AgNPs and ZnONPs in the present study is 48 and < 70 nm, respectively. The nanoparticles were spherical. The MIC and the MBC of the ZnONPs were in the range of 125 to 250 µg/mL respectively. Also, for AgNPs, the MIC and the MBC were in the range of 62.5 to 250 µg/ml, respectively. AbeM gene had the highest frequency and the AdeK gene had the lowest frequency. Statistical analysis showed that there is a relationship between the frequency of adeA, adeC, and adeM genes with the MIC of AgNPs and ZnONPs.

CONCLUSION

According to the results of the present study, inanimate objects such as scalpels in contact with AgNPs (6000 µg/ml for 240 min) or ZnONPs (5000 µg/ml for 120 min) can be free of biofilm producing Acinetobacter baumannii  with efflux pump genes.

Nanoarchitectonics-Based Materials as a Promising Strategy in the Treatment of Endodontic Infections

Endodontic infections arise from the interactive activities of microbial communities colonizing in the intricate root canal system. The present study aims to update the latest knowledge of nanomaterials, their antimicrobial mechanisms, and their applications in endodontics. A detailed literature review of the current knowledge of nanomaterials used in endodontic applications was performed using the PubMed database. Antimicrobial nanomaterials with a small size, large specific surface area, and high chemical activity are introduced to act as irrigants, photosensitizer delivery systems, and medicaments, or to modify sealers. The application of nanomaterials in the endodontic field could enhance antimicrobial efficiency, increase dentin tubule penetration, and improve treatment outcomes. This study supports the potential of nanomaterials as a promising strategy in treating endodontic infections.

Chitosan-Coated Silver Nanoparticles Inhibit Adherence and Biofilm Formation of Uropathogenic Escherichia coli

Urinary tract infections are commonly caused by uropathogenic Escherichia coli (UPEC), which usually presents multiple virulence and resistance mechanisms, making it difficult to treat. It has been demonstrated that silver and polymeric nanoparticles had potential against these pathogens. In this study, we synthesized thiol chitosan-coated silver nanoparticles (SH-Cs-AgNPs) and evaluated their antibacterial, antibiofilm and antiadherence activity against clinical isolates of UPEC. The SH-Cs-AgNPs showed a spherical shape with a size of 17.80 ± 2.67 nm and zeta potential of 18 ± 2 mV. We observed a potent antibacterial and antibiofilm activity as low as 12.5 μg/mL, as well as a reduction in the adherence of UPEC to mammalian cells at concentrations of 1.06 and 0.53 μg/mL. These findings demonstrate that SH-Cs-AgNPs have potential as a new therapeutic compound against infections caused by UPEC.

Fluorocarbon Plasma-Polymerized Layer Increases the Release Time of Silver Ions and the Antibacterial Activity of Silver-Based Coatings

Silver-based antibacterial coatings limit the spread of hospital-acquired infections. Indeed, the use of silver and silver oxide nanoparticles (Ag and AgO NPs) incorporated in amorphous hydrogenated carbon (a-C:H) as a matrix demonstrates a promising approach to reduce microbial contamination on environmental surfaces. However, its success as an antibacterial coating hinges on the control of Ag+ release. In this sense, if a continuous release is required, an additional barrier is needed to extend the release time of Ag+. Thus, this research investigated the use of a plasma fluoropolymer (CFx) as an additional top layer to elongate Ag+ release and increase the antibacterial activity due to its high hydrophobic nature. Herein, a porous CFx film was deposited on a-C:H containing Ag and AgO NPs using pulsed afterglow low pressure plasma polymerization. The chemical composition, surface wettability and morphology, release profile, and antibacterial activity were analyzed. Overall, the combination of a-C:H:Ag (12.1 at. % of Ag) and CFx film (120.0°, F/C = 0.8) successfully inactivated 88% of E. coli and delayed biofilm formation after 12 h. Thus, using a hybrid approach composed of Ag NPs and a hydrophobic polymeric layer, it was possible to increase the overall antibacterial activity of the coating.

Ag-NP-Decorated Carbon Nanostructures: Synthesis, Characterization, and Antimicrobial Properties

As the global urgency for effective antimicrobial agents intensifies, this work harnesses the widely demonstrated antimicrobial activity of silver nanoparticles (Ag-NPs) and proposes alternative synthesis approaches to metal-organic hybrid systems with antimicrobial activity. In this study, the proposed synthesis route involves decorating metallic nanoparticles into organic substrates without previous doping. The synthesis simultaneously uses polyethylene glycol for three crucial purposes: (1) acting as a mild reducing agent to generate Ag-NPs with a spherical shape and diameters ranging from 10 to just over 20 nm, (2) functioning as a dispersing agent for flakes of commercial nanostructured carbon supports, including reduced graphene oxide (rGO, ID-nano), and commercial carbon nanoplatelets from Sigma-Aldrich (GNPs, Sigma-Aldrich), and (3) serving as a promoter for the homogeneous anchoring of Ag-NPs in the carbon lattice without altering the conformation of the carbon lattice. This intricate interaction involves the π-orbitals from the sp2 hybridization honeycomb and the d-orbitals from the Ag-NPs, leading to the constructive rehybridization of rGO and GNPs. In our study, Ag-NPs/rGO are compared with a support lacking oxygenated groups in the lattice, such as commercial GNPs (Sigma-Aldrich), to produce Ag-NPs/GNPs. This comparison maintains constructive sp2 rehybridization, preserving the characteristic properties of rGO (ID-nano) and graphene nanoplatelets, including commercial GNPs (Sigma-Aldrich). Notably, oxygenated groups from rGO exhibit greater availability for exchanging oxo and hydroxy defects for Ag-NPs compared with GNPs (Sigma-Aldrich). The resulting Ag-NPs/rGO and Ag-NPs/GNP systems are thoroughly physicochemically characterized, employing techniques such as Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, and scanning transmission electron microscopy, revealing the successful integration of Ag-NPs with minimal alteration to the carbon lattice. Subsequent antimicrobial evaluation against Escherichia coli (E. coli) demonstrates significant activity, with Ag-NPs/rGO and Ag-NPs/GNPs registering similar minimum inhibitory concentrations of 50 μg mL-1. This study underscores the potential of our metal-organic hybrid systems as antimicrobial agents and provides insights into the constructive rehybridization process, paving the way for diverse applications in the biomedical and environmental fields.

Development, characterization, and evaluation of a simple polymicrobial colony biofilm model for testing of antimicrobial wound dressings

Chronic wound infections are generally of polymicrobial nature with aerobic and anaerobic bacteria, as well as fungi frequently observed in them. Wound treatment involves a series of steps, including debridement of the wound, flushing, and often the use of multiple wound dressings many of which are antimicrobial. Yet, many wound dressings are tested versus single species of planktonic microbes, which fails to mirror the real-life presence of biofilms.

AIMS

Simple biofilm models are the first step to testing of any antimicrobial and wound dressing; therefore, the aim of this study was to develop and validate a simple polymicrobial colony biofilm wound model comprised of Pseudomonas aeruginosa, Staphylococcus aureus, and Candida albicans on RPMI-1640 agar. The model was then used to evaluate the topical disinfectant chlorohexidine and four commercially available wound dressings using the polymicrobial model. The model used was as a starting point to mimic debridement in clinical care of wounds and the effectiveness of wound dressings evaluated afterwards.

METHODS AND RESULTS

Planktonic assessment using AATCC100-2004 demonstrated that all antimicrobial wound dressings reduced the planktonic microbial burden below the limit of detection; however, when challenged with polymicrobial colony biofilms, silver wound dressings showed limited effectiveness (1-2 log CFU reductions). In contrast, a single iodine releasing wound dressing showed potent antibiofilm activity reducing all species CFUs below the limit of detection (>6-10 log) depending on the species. A disrupted biofilm model challenge was performed to represent the debridement of a wound and wound silver-based wound dressings were found to be marginally more effective than in whole colony biofilm challenges while the iodine containing wound dressing reduced microbial recovery below the limit of detection.

CONCLUSIONS

In this model, silver dressings were ineffective versus the whole colony biofilms but showed some recovery of activity versus the disrupted colony biofilm. The iodine wound dressing reduced the viability of all species below the level of detection. This suggests that mode of action of wound dressing should be considered for the type of biofilm challenge as should the clinical use, e.g. debridement.

Impact of zinc supplementation on phenotypic antimicrobial resistance of fecal commensal bacteria from pre-weaned dairy calves

The objective of this study was to evaluate the impact of dietary zinc supplementation in pre-weaned dairy calves on the phenotypic antimicrobial resistance (AMR) of fecal commensal bacteria. A repository of fecal specimens from a random sample of calves block-randomized into placebo (n = 39) and zinc sulfate (n = 28) groups collected over a zinc supplementation clinical trial at the onset of calf diarrhea, calf diarrheal cure, and the last day of 14 cumulative days of zinc or placebo treatment were analyzed. Antimicrobial susceptibility testing was conducted for Enterococcus spp. (n = 167) and E. coli (n = 44), with one representative isolate of each commensal bacteria tested per sample. Parametric survival interval regression models were constructed to evaluate the association between zinc treatment and phenotypic AMR, with exponentiated accelerated failure time (AFT) coefficients adapted for MIC instead of time representing the degree of change in AMR (MIC Ratio, MR). Findings from our study indicated that zinc supplementation did not significantly alter the MIC in Enterococcus spp. for 13 drugs: gentamicin, vancomycin, ciprofloxacin, erythromycin, penicillin, nitrofurantoin, linezolid, quinupristin/dalfopristin, tylosin tartrate, streptomycin, daptomycin, chloramphenicol, and tigecycline (MR = 0.96-2.94, p > 0.05). In E. coli, zinc supplementation was not associated with resistance to azithromycin (MR = 0.80, p > 0.05) and ceftriaxone (MR = 0.95, p > 0.05). However, a significant reduction in E. coli MIC values was observed for ciprofloxacin (MR = 0.17, 95% CI 0.03-0.97) and nalidixic acid (MR = 0.28, 95% CI 0.15-0.53) for zinc-treated compared to placebo-treated calves. Alongside predictions of MIC values generated from these 17 AFT models, findings from this study corroborate the influence of age and antimicrobial exposure on phenotypic AMR.

Revisiting the smart metallic nanomaterials: advances in nanotechnology-based antimicrobials

Despite significant advancements in diagnostics and treatments over the years, the problem of antimicrobial drug resistance remains a pressing issue in public health. The reduced effectiveness of existing antimicrobial drugs has prompted efforts to seek alternative treatments for microbial pathogens or develop new drug candidates. Interestingly, nanomaterials are currently gaining global attention as a possible next-generation antibiotics. Nanotechnology holds significant importance, particularly when addressing infections caused by multi-drug-resistant organisms. Alternatively, these biomaterials can also be combined with antibiotics and other potent biomaterials, providing excellent synergistic effects. Over the past two decades, nanoparticles have gained significant attention among research communities. Despite the complexity of some of their synthesis strategies and chemistry, unrelenting efforts have been recorded in synthesizing potent and highly effective nanomaterials using different approaches. With the ongoing advancements in nanotechnology, integrating it into medical procedures presents novel approaches for improving the standard of patient healthcare. Although the field of nanotechnology offers promises, much remains to be learned to overcome the several inherent issues limiting their full translation to clinics. Here, we comprehensively discussed nanotechnology-based materials, focusing exclusively on metallic nanomaterials and highlighting the advances in their synthesis, chemistry, and mechanisms of action against bacterial pathogens. Importantly, we delve into the current challenges and prospects associated with the technology.

Bioinspired silver nanoparticle-based nanocomposites for effective control of plant pathogens: A review

Plant pathogens, including bacteria, fungi, and viruses, pose significant challenges to the farming community due to their extensive diversity, the rapidly evolving phenomenon of multi-drug resistance (MDR), and the limited availability of effective control measures. Amid mounting global pressure, particularly from the World Health Organization, to limit the use of antibiotics in agriculture and livestock management, there is increasing consideration of engineered nanomaterials (ENMs) as promising alternatives for antimicrobial applications. Studies focusing on the application of ENMs in the fight against MDR pathogens are receiving increasing attention, driven by significant losses in agriculture and critical knowledge gaps in this crucial field. In this review, we explore the potential contributions of silver nanoparticles (AgNPs) and their nanocomposites in combating plant diseases, within the emerging interdisciplinary arena of nano-phytopathology. AgNPs and their nanocomposites are increasingly acknowledged as promising countermeasures against plant pathogens, owing to their unique physicochemical characteristics and inherent antimicrobial properties. This review explores recent advancements in engineered nanocomposites, highlights their diverse mechanisms for pathogen control, and draws attention to their potential in antibacterial, antifungal, and antiviral applications. In the discussion, we briefly address three crucial dimensions of combating plant pathogens: green synthesis approaches, toxicity-environmental concerns, and factors influencing antimicrobial efficacy. Finally, we outline recent advancements, existing challenges, and prospects in scholarly research to facilitate the integration of nanotechnology across interdisciplinary fields for more effective treatment and prevention of plant diseases.

Antimicrobial Activity of Two Different Types of Silver Nanoparticles against Wide Range of Pathogenic Bacteria

The emergence of antibiotic-resistant bacteria, particularly the most hazardous pathogens, namely Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp. (ESKAPE)-pathogens pose a significant threat to global health. Current antimicrobial therapies, including those targeting biofilms, have shown limited effectiveness against these superbugs. Nanoparticles, specifically silver nanoparticles (AgNPs), have emerged as a promising alternative for combating bacterial infections. In this study, two types of AgNPs with different physic-chemical properties were evaluated for their antimicrobial and antibiofilm activities against clinical ESKAPE strains. Two types of silver nanoparticles were assessed: spherical silver nanoparticles (AgNPs-1) and cubic-shaped silver nanoparticles (AgNPs-2). AgNPs-2, characterized by a cubic shape and higher surface-area-to-volume ratio, exhibited superior antimicrobial activity compared to spherical AgNPs-1. Both types of AgNPs demonstrated the ability to inhibit biofilm formation and disrupt established biofilms, leading to membrane damage and reduced viability of the bacteria. These findings highlight the potential of AgNPs as effective antibacterial agents against ESKAPE pathogens, emphasizing the importance of nanoparticle characteristics in determining their antimicrobial properties. Further research is warranted to explore the underlying mechanisms and optimize nanoparticle-based therapies for the management of infections caused by antibiotic-resistant bacteria.

In Vitro Effects of Silver Nanoparticles on Pathogenic Bacteria and on Metabolic Activity and Viability of Human Mesenchymal Stem Cells

The rapid development of nanotechnology has led to the use of silver nanoparticles (Ag-NPs) in various biomedical fields. However, the effect of Ag-NPs on human mesenchymal stem cells (hMSCs) is not fully understood. Moreover, too frequent an exposure to products containing nanosilver in sublethal amounts raises widespread concerns that it will lead to the development of silver-resistant microorganisms. Therefore, this study aimed to evaluate the mechanism of action of Ag-NPs on hMSCs by analyzing the cellular uptake of Ag-NPs by the cells and its effect on their viability and to assess antimicrobial activity of Ag-NPs against emerging bacterial strains, including multidrug-resistant pathogens. For metabolic activity and viability evaluation, hMSCs were incubated with different concentrations of Ag-NPs (14 μg/mL, 7 μg/mL, and 3.5 μg/mL) for 10 min., 1 h and 24 h and subsequently analyzed for their viability by live-dead staining and metabolic activity by the MTS assay. The effect of Ag-NPs on bacterial pathogens was studied by determining their minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). In conclusion, it was observed that exposure of hMSCs to Ag-NPs of size <10 nm has no cytotoxic effect on the metabolic activity of the cells at the concentration of 3.5 μg/mL, with minimal cytotoxic effect being observed at the concentration of 14 μg/mL after 24 h of incubation. Our findings also confirmed that Ag-NPs at the concentration of 4 μg/mL are effective broad-spectrum bactericidal agents, regardless of the antibiotic-resistance mechanism present in bacteria.

Biogenic silver nanoparticles: Synthesis, applications and challenges in food sector with special emphasis on aquaculture

Aquaculture, a rapidly expanding global food sector faces challenges like pathogenic infections, water quality management and sustainability. Silver nanoparticles (AgNPs) have emerged as promising tools in aquaculture due to their antimicrobial, antiviral and antifungal properties. AgNPs offer alternatives to traditional antimicrobial agents. Their small size and unique physicochemical properties enhance antimicrobial activity, effectively inhibiting pathogen growth and reducing disease incidence in aquatic organisms. Additionally, AgNPs can improve water quality by catalyzing the removal of pollutants, heavy metals and nutrients, reducing environmental impacts. Despite their potential benefits, several challenges and knowledge gaps exist in the utilization of AgNPs in aquaculture. Addressing challenges related to regulation, sustainability and environmental impact will be crucial for realizing their full potential in the industry. Therefore, the present review aims to provide insight into the role of AgNPs, its challenges in aquaculture and also highlights key areas for future research.

Co-regulation of biofilm formation and antimicrobial resistance in Acinetobacter baumannii: from mechanisms to therapeutic strategies

In recent years, multidrug-resistant Acinetobacter baumannii has emerged globally as a major threat to the healthcare system. It is now listed by the World Health Organization as a priority one for the need of new therapeutic agents. A. baumannii has the capacity to develop robust biofilms on biotic and abiotic surfaces. Biofilm development allows these bacteria to resist various environmental stressors, including antibiotics and lack of nutrients or water, which in turn allows the persistence of A. baumannii in the hospital environment and further outbreaks. Investigation into therapeutic alternatives that will act on both biofilm formation and antimicrobial resistance (AMR) is sorely needed. The aim of the present review is to critically discuss the various mechanisms by which AMR and biofilm formation may be co-regulated in A. baumannii in an attempt to shed light on paths towards novel therapeutic opportunities. After discussing the clinical importance of A. baumannii, this critical review highlights biofilm-formation genes that may be associated with the co-regulation of AMR. Particularly worthy of consideration are genes regulating the quorum sensing system AbaI/AbaR, AbOmpA (OmpA protein), Bap (biofilm-associated protein), the two-component regulatory system BfmRS, the PER-1 β-lactamase, EpsA, and PTK. Finally, this review discusses ongoing experimental therapeutic strategies to fight A. baumannii infections, namely vaccine development, quorum sensing interference, nanoparticles, metal ions, natural products, antimicrobial peptides, and phage therapy. A better understanding of the mechanisms that co-regulate biofilm formation and AMR will help identify new therapeutic targets, as combined approaches may confer synergistic benefits for effective and safer treatments.

3D-printed wound dressings containing a fosmidomycin-derivative prevent Acinetobacter baumannii biofilm formation

Acinetobacter baumannii causes a wide range of infections, including wound infections. Multidrug-resistant A. baumannii is a major healthcare concern and the development of novel treatments against these infections is needed. Fosmidomycin is a repurposed antimalarial drug targeting the non-mevalonate pathway, and several derivatives show activity toward A. baumannii. We evaluated the antimicrobial activity of CC366, a fosmidomycin prodrug, against a collection of A. baumannii strains, using various in vitro and in vivo models; emphasis was placed on the evaluation of its anti-biofilm activity. We also developed a 3D-printed wound dressing containing CC366, using melt electrowriting technology. Minimal inhibitory concentrations of CC366 ranged from 1 to 64 μg/mL, and CC366 showed good biofilm inhibitory and moderate biofilm eradicating activity in vitro. CC366 successfully eluted from a 3D-printed dressing, the dressings prevented the formation of A. baumannnii wound biofilms in vitro and reduced A. baumannii infection in an in vivo mouse model.

Synthesis, Characterization, and Docking Study of Novel Thioureidophosphonate-Incorporated Silver Nanocomposites as Potent Antibacterial Agents

Newly synthesized mono- and bis-thioureidophosphonate (MTP and BTP) analogues in eco-friendly conditions were employed as reducing/capping cores for 100, 500, and 1000 mg L^-1 of silver nitrate. The physicochemical properties of silver nanocomposites (MTP(BTP)/Ag NCs) were fully elucidated using spectroscopic and microscopic tools. The antibacterial activity of the nanocomposites was screened against six multidrug-resistant pathogenic strains, comparable to ampicillin and ciprofloxacin commercial drugs. The antibacterial performance of BTP was more substantial than MTP, notably with the best minimum inhibitory concentration (MIC) of 0.0781 mg/mL towards Bacillus subtilis, Salmonella typhi, and Pseudomonas aeruginosa. Among all, BTP provided the clearest zone of inhibition (ZOI) of 35 ± 1.00 mm against Salmonella typhi. After the dispersion of silver nanoparticles (AgNPs), MTP/Ag NCs offered dose-dependently distinct advantages over the same nanoparticle with BTP; a more noteworthy decline by 4098 × MIC to 0.1525 × 10^-3 mg/mL was recorded for MTP/Ag-1000 against Pseudomonas aeruginosa over BTP/Ag-1000. Towards methicillin-resistant Staphylococcus aureus (MRSA), the as-prepared MTP(BTP)/Ag-1000 displayed superior bactericidal ability in 8 h. Because of the anionic surface of MTP(BTP)/Ag-1000, they could effectively resist MRSA (ATCC-43300) attachment, achieving higher antifouling rates of 42.2 and 34.4% at most optimum dose (5 mg/mL), respectively. The tunable surface work function between MTP and AgNPs promoted the antibiofilm activity of MTP/Ag-1000 by 1.7 fold over BTP/Ag-1000. Lastly, the molecular docking studies affirmed the eminent binding affinity of BTP over MTP-besides the improved binding energy of MTP/Ag NC by 37.8%-towards B. subtilis-2FQT protein. Overall, this study indicates the immense potential of TP/Ag NCs as promising nanoscale antibacterial candidates.

Antimicrobial activity and cytotoxicity study of cerium oxide nanoparticles with two different sizes

The control over bacterial diseases requires the development of novel antibacterial agents. The use of antibacterial nanomedicines is one of the strategies to tackle antibiotic resistance. The study was designed to assess the antimicrobial activity of cerium oxide (CeO₂ ) nanoparticles (NP) of two different sizes (CeO₂ NP1 [1-2 nm] and CeO₂ NP2 [10-12 nm]) and their cytotoxicity towards eukaryotic cells. The antimicrobial activity, effects of nanoparticles on DNA cleavage, microbial cell viability, and biofilm formation inhibition were analyzed. The impact of cerium oxide nanoparticles on eryptosis of erythrocytes was estimated using annexin V staining by flow cytometry. The newly synthesized CeO₂ NP1 and CeO₂ NP2 displayed moderate antimicrobial activities. CeO₂ NP1 and CeO₂ NP2 exhibited single-strand DNA cleavage ability. CeO₂ NPs were found to show 100% microbial cell viability inhibition at a concentration of 500 mg/L. In addition, CeO₂ NP1 and CeO₂ NP2 inhibited the biofilm formation of S. aureus and P. aeruginosa. Larger cerium oxide nanoparticles were found to be less toxic against erythrocytes compared with the smaller ones. CeO₂ nanoparticles demonstrate moderate antimicrobial activity and low cytotoxicity towards erythrocytes, which make them promising antibacterial agents.

Comparative genomic analysis of Colistin resistant Escherichia coli isolated from pigs, a human and wastewater on colistin withdrawn pig farm

In this study, genomic and plasmid characteristics of Escherichia coli were determined with the aim of deducing how mcr genes may have spread on a colistin withdrawn pig farm. Whole genome hybrid sequencing was applied to six mcr-positive E. coli (MCRPE) strains isolated from pigs, a farmworker and wastewater collected between 2017 and 2019. Among these, mcr-1.1 genes were identified on IncI2 plasmids from a pig and wastewater, and on IncX4 from the human isolate, whereas mcr-3 genes were found on plasmids IncFII and IncHI2 in two porcine strains. The MCRPE isolates exhibited genotypic and phenotypic multidrug resistance (MDR) traits as well as heavy metal and antiseptic resistance genes. The mcr-1.1-IncI2 and IncX4 plasmids carried only colistin resistance genes. Whereas, the mcr-3.5-IncHI2 plasmid presented MDR region, with several mobile genetic elements. Despite the MCRPE strains belonged to different E. coli lineages, mcr-carrying plasmids with high similarities were found in isolates from pigs and wastewater recovered in different years. This study highlighted that several factors, including the resistomic profile of the host bacteria, co-selection via adjunct antibiotic resistance genes, antiseptics, and/or disinfectants, and plasmid-host fitness adaptation may encourage the maintenance of plasmids carrying mcr genes in E. coli.

Antibacterial Enhancement of High-Efficiency Particulate Air Filters Modified with Graphene-Silver Hybrid Material

Bacterial infections are a major concern as antibiotic resistance poses a great threat, therefore leading to a race against time into finding new drugs or improving the existing resources. Nanomaterials with high surface area and bactericidal properties are the most promising ones that help combating microbial infections. In our case, graphene decorated with silver nanoparticles Gr-Ag (5 wt% Ag) exhibited inhibitory capacity against S. aureus and E. coli. The newly formed hybrid material was next incubated with high-efficiency particulate air (HEPA) filter, to obtain one with bactericidal properties. The modified filter had greater inhibitory action against the tested strains, compared to the control, and the effect was better against the Gram-negative model. Even if the bacteria remained attached to the filters, their colony forming unit capacity was affected by the Gr-Ag (5 wt% Ag) hybrid material, when they were subsequently re-cultured on fresh agar media. Therefore, the HEPA filter modified with Gr-Ag (5 wt% Ag) has high antibacterial properties that may substantially improve the existing technology.

Development of Nanoparticle Adaptation Phenomena in Acinetobacter baumannii: Physiological Change and Defense Response

The present work describes the evolution of a resistance phenotype to a multitargeting antimicrobial agent, namely, silver nanoparticles (nanosilver; NAg), in the globally prevalent bacterial pathogen Acinetobacter baumannii. The Gram-negative bacterium has recently been listed as a critical priority pathogen requiring novel treatment options by the World Health Organization. Through prolonged exposure to the important antimicrobial nanoparticle, the bacterium developed mutations in genes that encode the protein subunits of organelle structures that are involved in cell-to-surface attachment as well as in a cell envelope capsular polysaccharide synthesis-related gene. These mutations are potentially correlated with stable physiological changes in the biofilm growth behavior and with an evident protective effect against oxidative stress, most likely as a feature of toxicity defense. We further report a different adaptation response of A. baumannii to the cationic form of silver (Ag+). The bacterium developed a tolerance phenotype to Ag+, which was correlated with an indicative surge in respiratory activity and changes in cell morphology, of which these are reported characteristics of tolerant bacterial populations. The findings regarding adaptation phenomena to NAg highlight the risks of the long-term use of the nanoparticle on a priority pathogen. The findings urge the implementation of strategies to overcome bacterial NAg adaptation, to better elucidate the toxicity mechanisms of the nanoparticle, and preserve the efficacy of the potent alternative antimicrobial agent in this era of antimicrobial resistance. IMPORTANCE Several recent studies have reported on the development of bacterial resistance to broad-spectrum antimicrobial silver nanoparticles (nanosilver; NAg). NAg is currently one of the most important alternative antimicrobial agents. However, no studies have yet established whether Acinetobacter baumannii, a globally prevalent nosocomial pathogen, can develop resistance to the nanoparticle. The study herein describes how a model strain of A. baumannii with no inherent silver resistance determinants developed resistance to NAg, following prolonged exposure. The stable physiological changes are correlated with mutations detected in the bacterium genome. These mutations render the bacterium capable of proliferating at a toxic NAg concentration. It was also found that A. baumannii developed a "slower-to-kill" tolerance trait to Ag+, which highlights the unique antimicrobial activities between the nanoparticulate and the ionic forms of silver. Despite the proven efficacy of NAg, the observation of NAg resistance in A. baumannii emphasises the potential risks of the repeated overuse of this agent on a priority pathogen.

Emergence of microbial resistance against nanoparticles: Mechanisms and strategies

Antimicrobial nanoparticles have gained the status of a new generation of drugs that can kill bacterial pathogens by multiple means; however, nanoparticle resistance acquired by some bacterial pathogens has evoked a cause of concern. Several reports suggested that bacteria can develop nanoparticles, specifically metal nanoparticle resistance, by mechanisms: nanoparticle transformation-induced oxidative stress, membrane alterations, reversible adaptive resistance, irreversible modifications to cell division, and a change in bacterial motility and resistance. Surface properties, concentration and aggregation of nanoparticles, biofilm forming and metal exclusion capacity, and R plasmid and flagellin synthesis by bacteria are crucial factors in the development of nanoparticle resistance in bacteria. Studies reported the resistance reversal by modifying the surface corona of nanoparticles or inhibiting flagellin production by bacterial pathogens. Furthermore, strict regulation regarding the use and disposal of nano-waste across the globe, the firm knowledge of microbe-nanoparticle interaction, and the regulated disposal of nanoparticles in soil and water is required to prevent microbes from developing nanoparticle resistance.

Combined Use of Antimicrobial Peptides with Antiseptics against Multidrug-Resistant Bacteria: Pros and Cons

Antimicrobial peptides (AMPs) are acknowledged as a promising template for designing new antimicrobials. At the same time, existing toxicity issues and limitations in their pharmacokinetics make topical application one of the less complicated routes to put AMPs-based therapeutics into actual medical practice. Antiseptics are one of the common components for topical treatment potent against antibiotic-resistant pathogens but often with toxicity limitations of their own. Thus, the interaction of AMPs and antiseptics is an interesting topic that is also less explored than combined action of AMPs and antibiotics. Herein, we analyzed antibacterial, antibiofilm, and cytotoxic activity of combinations of both membranolytic and non-membranolytic AMPs with a number of antiseptic agents. Fractional concentration indices were used as a measure of possible effective concentration reduction achievable due to combined application. Cases of both synergistic and antagonistic interaction with certain antiseptics and surfactants were identified, and trends in the occurrence of these types of interaction were discussed. The data may be of use for AMP-based drug development and suggest that the topic requires further attention for successfully integrating AMPs-based products in the context of complex treatment. AMP/antiseptic combinations show promise for creating topical formulations with improved activity, lowered toxicity, and, presumably, decreased chances of inducing bacterial resistance. However, careful assessment is required to avoid AMP neutralization by certain antiseptic classes in either complex drug design or AMP application alongside other therapeutics/care products.

A whole cell fluorescence quenching-based approach for the investigation of polyethyleneimine functionalized silver nanoparticles interaction with Candida albicans

The antimicrobial activity of metal nanoparticles can be considered a two-step process. In the first step, nanoparticles interact with the cell surface; the second step involves the implementation of the microbicidal processes. Silver nanoparticles have been widely explored for their antimicrobial activity against many pathogens. The interaction dynamics of functionalized silver nanoparticles at the biological interface must be better understood to develop surface-tuned biocompatible nanomaterial-containing formulations with selective antimicrobial activity. Herein, this study used the intrinsic fluorescence of whole C. albicans cells as a molecular probe to understand the cell surface interaction dynamics of polyethyleneimine-functionalized silver nanoparticles and antifungal mechanism of the same. The results demonstrated that synthesized PEI-f-Ag-NPs were ~ 5.6 ± 1.2 nm in size and exhibited a crystalline structure. Furthermore, the recorded zeta potential (+18.2 mV) was associated with the stability of NPS and shown a strong electrostatic interaction tendency between the negatively charged cell surface. Thus, rapid killing kinetics was observed, with a remarkably low MIC value of 5 μg/mL. PEI-f-Ag-NPs quenched the intrinsic fluorescence of C. albicans cells with increasing incubation time and concentration and have shown saturation effect within 120 min. The calculated binding constant (Kb = 1 × 10⁵ M^-1, n = 1.01) indicated strong binding tendency of PEI-f-Ag-NPs with C. albicans surface. It should also be noted that the silver nanoparticles interacted more selectively with the tyrosine-rich proteins in the fungal cell. However, calcofluor white fluorescence quenching showed non-specific binding on the cell surface. Thus, the antifungal mechanisms of PEI-f-Ag-NPs were observed as reactive oxygen species (ROS) overproduction and cell wall pit formation. This study demonstrated the utility of fluorescence spectroscopy for qualitative analysis of polyethyleneimine-functionalized silver nanoparticle interaction/binding with C. albicans cell surface biomolecules. Although, a quantitative approach is needed to better understand the interaction dynamics in order to formulate selective surface tuned nanoparticle for selective antifungal activity.

Growth suppression of bacteria by biofilm deterioration using silver nanoparticles with magnetic doping

Decades of antibiotic use and misuse have generated selective pressure toward the rise of antibiotic-resistant bacteria, which now contaminate our environment and pose a major threat to humanity. According to the evolutionary "Red queen theory", developing new antimicrobial technologies is both urgent and mandatory. While new antibiotics and antibacterial technologies have been developed, most fail to penetrate the biofilm that protects bacteria against external antimicrobial attacks. Hence, new antimicrobial formulations should combine toxicity for bacteria, biofilm permeation ability, biofilm deterioration capability, and tolerability by the organism without renouncing compatibility with a sustainable, low-cost, and scalable production route as well as an acceptable ecological impact after the ineluctable release of the antibacterial compound in the environment. Here, we report on the use of silver nanoparticles (NPs) doped with magnetic elements (Co and Fe) that allow standard silver antibacterial agents to perforate bacterial biofilms through magnetophoretic migration upon the application of an external magnetic field. The method has been proved to be effective in opening micrometric channels and reducing the thicknesses of models of biofilms containing bacteria such as Enterococcus faecalis, Enterobacter cloacae, and Bacillus subtilis. Besides, the NPs increase the membrane lipid peroxidation biomarkers through the formation of reactive oxygen species in E. faecalis, E. cloacae, B. subtilis, and Pseudomonas putida colonies. The NPs are produced using a one-step, scalable, and environmentally low-cost procedure based on laser ablation in a liquid, allowing easy transfer to real-world applications. The antibacterial effectiveness of these magnetic silver NPs may be further optimized by engineering the external magnetic fields and surface conjugation with specific functionalities for biofilm disruption or bactericidal effectiveness.

Antibiotic resistance genes and bacterial diversity: A comparative molecular study of treated sewage from different origins and their impact on irrigated soils

Present study aims to investigate how is soil affected following irrigation with treated effluents of different origins by analysing the bacterial diversity, metabolic diversity and antibiotic resistance genes (ARGs). Comparative analysis with previously reported ARGs in effluents was performed to understand the mobility of ARGs from treated wastewater to the irrigated soil with respect to the control soil regimen. Acinetobacter, Burkholderia and Pseudomonas were observed as the most abundant genera in all the samples. The metabolic gene abundance of all the samples suggests a prominent contribution to natural mineral recycling. Most abundant ARGs observed encode resistance for clindamycin, kanamycin A, macrolides, paromomycin, spectinomycin and tetracycline. Treated effluent reuse did not appear to enhance the ARG levels in soils in most cases except for institutional treatment site (M), where the ARGs for aminoglycosides, β-lactams and sulfonamides were found to be abundantly present in both treated effluent and the irrigated soil. This study finds the importance of wastewater treatment from different origins and the impact of treated wastewater reuse in irrigation. This study also emphasises on the better understanding of ARGs mobility from water to soil.

Advancements in antimicrobial nanoscale materials and self-assembling systems

Antimicrobial resistance is directly responsible for more deaths per year than either HIV/AIDS or malaria and is predicted to incur a cumulative societal financial burden of at least $100 trillion between 2014 and 2050. Already heralded as one of the greatest threats to human health, the onset of the coronavirus pandemic has accelerated the prevalence of antimicrobial resistant bacterial infections due to factors including increased global antibiotic/antimicrobial use. Thus an urgent need for novel therapeutics to combat what some have termed the 'silent pandemic' is evident. This review acts as a repository of research and an overview of the novel therapeutic strategies being developed to overcome antimicrobial resistance, with a focus on self-assembling systems and nanoscale materials. The fundamental mechanisms of action, as well as the key advantages and disadvantages of each system are discussed, and attention is drawn to key examples within each field. As a result, this review provides a guide to the further design and development of antimicrobial systems, and outlines the interdisciplinary techniques required to translate this fundamental research towards the clinic.

Silver Nanoparticles Functionalized Nanosilica Grown over Graphene Oxide for Enhancing Antibacterial Effect

The continuous growth of multidrug-resistant bacteria due to the overuse of antibiotics and antibacterial agents poses a threat to human health. Silver nanoparticles, silica-based materials, and graphene-based materials have become potential antibacterial candidates. In this study, we developed an effective method of enhancing the antibacterial property of graphene oxide (GO) by growing nanosilica (NS) of approximately 50 nm on the graphene oxide (GO) surface. The structures and compositions of the materials were characterized through powdered X-ray diffraction (P-XRD), transmission electron microscopy (TEM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS), ultraviolet-visible spectroscopy (UV-VIS), dynamic light scattering (DLS), Raman spectroscopy (RM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmet-Teller (BET) surface area, and pore size determination. The silver nanoparticles (AgNPs) with an average diameter of 26 nm were functionalized on the nanosilica (NS) surface. The composite contained approximately 3% of silver nanoparticles. The silver nanoparticles on nanosilica supported over graphene oxide (GO/NS/AgNPs) exhibited a 7-log reduction of Escherichia coli and a 5.2-log reduction of Bacillus subtilis within one hour of exposure. Both GO/NS and GO/NS/AgNPs exhibited substantial antimicrobial effects against E. coli and B. subtilis.

Biosynthesis of Silver Nanoparticles Using Seasonal Samples of Sonoran Desert Propolis: Evaluation of Its Antibacterial Activity against Clinical Isolates of Multi-Drug Resistant Bacteria

Multi-drug resistant (MDR) bacteria have gained importance as a health problem worldwide, and novel antibacterial agents are needed to combat them. Silver nanoparticles (AgNPs) have been studied as a potent antimicrobial agent, capable of countering MDR bacteria; nevertheless, their conventional synthesis methods can produce cytotoxicity and environmental hazards. Biosynthesis of silver nanoparticles has emerged as an alternative to reduce the cytotoxic and environmental problems derived from their chemical synthesis, using natural products as a reducing and stabilizing agent. Sonoran Desert propolis (SP) is a poplar-type propolis rich in polyphenolic compounds with remarkable biological activities, such as being antioxidant, antiproliferative, and antimicrobial, and is a suitable candidate for synthesis of AgNPs. In this study, we synthesized AgNPs using SP methanolic extract (SP-AgNPs) and evaluated the reduction capacity of their seasonal samples and main chemical constituents. Their cytotoxicity against mammalian cell lines and antibacterial activity against multi-drug resistant bacteria were assessed. Quercetin and galangin showed the best-reduction capacity for synthesizing AgNPs, as well as the seasonal sample from winter (SPw-AgNPs). The SPw-AgNPs had a mean size of around 16.5 ± 5.3 nm, were stable in different culture media, and the presence of propolis constituents was confirmed by FT-IR and HPLC assays. The SPw-AgNPs were non-cytotoxic to ARPE-19 and HeLa cell lines and presented remarkable antibacterial and antibiofilm activity against multi-drug resistant clinical isolates, with E. coli 34 and ATCC 25922 being the most susceptible (MBC = 25 μg/mL), followed by E. coli 2, 29, 37 and PNG (MBC = 50 μg/mL), and finally E. coli 37 and S. aureus ATCC 25923 (MBC = 100 μg/mL). These results demonstrated the efficacy of SP as a reducing and stabilizing agent for synthesis of AgNPs and their capacity as an antibacterial agent.

Identification and Characterisation of pST1023 A Mosaic, Multidrug-Resistant and Mobilisable IncR Plasmid

We report the identification and characterisation of a mosaic, multidrug-resistant and mobilisable IncR plasmid (pST1023) detected in Salmonella ST1023, a monophasic variant 4,[5],12:i: strain of widespread pandemic lineage, reported as a Southern European clone. pST1023 contains exogenous DNA regions, principally gained from pSLT-derivatives and IncI1 plasmids. Acquisition from IncI1 included oriT and nikAB and these conferred the ability to be mobilisable in the presence of a helper plasmid, as we demonstrated with the conjugative plasmids pST1007-1D (IncFII) or pVC1035 (IncC). A sul3-associated class 1 integron, conferring resistance to aminoglycosides, chloramphenicol and trimethoprim-sulphonamides, was also embedded in the acquired IncI1 DNA segment. pST1023 also harboured an additional site-specific recombination system (rfsF/rsdB) and IS elements of the IS1, IS5 (IS903 group) and IS6 families. Four of the six IS26 elements present constituted two pseudo-compound-transposons, named PCT-sil and PCT-Tn10 (identified here for the first time). The study further highlighted the mosaic genetic architecture and the clinical importance of IncR plasmids. Moreover, it provides the first experimental data on the ability of IncR plasmids to be mobilised and their potential role in the horizontal spread of antimicrobial-resistant genes.

Metal nanoparticles and nanoparticle composites are effective against Haemophilus influenzae, Streptococcus pneumoniae, and multidrug-resistant bacteria

BACKGROUND

Treatment for lower respiratory tract infection caused by multidrug-resistant organisms (MDRO) are often limited. This study explored the activity of different metal nanoparticles against several respiratory pathogens including MDROs.

METHODS

Clinical isolates of carbapenem-resistant Acinetobacter baumannii (CRAB), carbapenem-resistant Klebsiella pneumoniae (CRKP), Pseudomonas aeruginosa, Haemophilus influenzae, methicillin-resistant Staphylococcus aureus (MRSA), and Streptococcus pneumoniae were tested for in vitro susceptibilities to various antibiotics and nanoparticles. Minimum inhibitory concentrations (MICs) of silver-nanoparticle (Ag-NP), selenium-nanoparticle (Se-NP), and three composites solutions ND50, NK99, and TPNT1 (contained 5 ppm Ag-NP, 60 ppm ZnO-nanoparticle, and different concentrations of gold-nanoparticle or ClO₂) were determined by broth microdilution method.

RESULTS

Fifty isolates of each bacterial species listed above were tested. Ag-NP showed lower MICs to all species than Se-NP. The MIC₅₀s of Ag-NP for CRAB, CRKP, P. aeruginosa, and H. influenzae were <3.125 ppm, 25 ppm, <3.125 ppm, and <3.125 ppm, respectively, while those for S. pneumoniae and MRSA were >50 ppm and 50 ppm. Among CRAB, CRKP and P. aeruginosa, the MIC₅₀s of ND50, NK99, and TPNT1 for CRAB were the lowest (1/8 dilution, 1/8 dilution, and 1/8 dilution, respectively), and those for CRKP (>1/2 dilution, 1/2 dilution, and 1/2 dilution, respectively) were the highest. Both MRSA and S. pneumoniae showed high MIC₅₀s to ND50, NK99, and TPNT1.

CONCLUSIONS

Metal nanoparticles had good in vitro activity against Gram-negative bacteria. They might be suitable to be prepared as environmental disinfectants or inhaled agents to inhibit the growth of MDR Gram-negative colonizers in the lower respiratory tracts of patients with chronic lung diseases.