Enhancing microalgal lipid accumulation for biofuel production

Putative Endoplasmic Reticulum Stress Inducers Enhance Triacylglycerol Accumulation in Chlorella sorokiniana

Chlorella, recognized for its high lipid and protein content, is increasingly studied for its potential in the food and bio industries. To enhance its production and understand the underlying mechanisms of lipid accumulation, this study investigated the role of endoplasmic reticulum (ER) stress in modulating lipid metabolism in Chlorella sorokiniana UTEX 2714, using six putative ER stress inducers: 2-deoxy-D-glucose (2-DG), dithiothreitol (DTT), tunicamycin (TM), thapsigargin (TG), brefeldin A (BFA), and monensin (Mon). The results showed that 2-DG, DTT, TM, BFA, and Mon significantly inhibited cell growth in C. sorokiniana. Treatment with 2-DG, DTT, TM, BFA, or Mon resulted in substantial increases in the triacylglycerol (TAG) to total fatty acid (tFA) ratio, with fold changes of 14.8, 7.9, 6.2, 10.1, and 8.9, respectively. Among the tFAs, cells treated with these compounds exhibited higher levels of saturated fatty acids and lower levels of polyunsaturated fatty acids (PUFAs). In contrast, the fatty acid composition of TAGs showed the opposite trend, with relative enrichment in PUFAs. This study enhances our understanding of Chlorella lipid metabolism, providing valuable insights for optimizing lipid production, particularly TAGs enriched with PUFA content, for applications in functional foods, nutraceuticals, and sustainable bioresources.

Environmental Applications of GM Microorganisms: Tiny Critters Posing Huge Challenges for Risk Assessment and Governance

In recent years, the interest in developing genetically modified microorganisms (GMMs), including GMMs developed by genome editing, for use in the environment has significantly increased. However, the scientific knowledge on the ecology of such GMMs is severely limited. There is also little experience at the hands of regulators on how to evaluate the environmental safety of GMMs and on how to assess whether they provide sustainable alternatives to current (agricultural) production systems. This review analyzes two different GMM applications, GM microalgae for biofuel production and nitrogen-fixing GM soil bacteria for use as biofertilizers. We assess the challenges posed by such GMMs for regulatory environmental risk assessment (ERA) against the background of the GMO legislation existing in the European Union (EU). Based on our analysis, we present recommendations for ERA and the monitoring of GMM applications, and in particular for the improvement of the existing EU guidance. We also explore whether existing approaches for technology assessment can provide a framework for the broader assessment of GMM applications. To this end, we recommend developing and implementing an evidence-based sustainability analysis and other methods of technology assessment to support decision making and to address broader societal concerns linked to the use of GMM applications in the environment.

Enhancing Biomass and Lipid Production in Messastrum gracile Using Inorganic Carbon Substrates and Alternative Solvents for Lipid Extraction

Microalgae show promise as a biomass and bioproduct for applications in various industries. The cultivation of microalgae plays a crucial role in optimizing biomass yield and bioproduct accumulation. The provision of inorganic carbon substrates substantially enhances microalgal growth and lipid biosynthesis, resulting in marked increases in the production of biofuels and other bioproducts. This study examined biomass and lipid accumulation in Messastrum gracile IFRPD 1061 under inorganic stress conditions, previously unreported. M. gracile IFRPD 1061 was subjected to varying conditions of inorganic carbon substrates, 1-3 g·L-1 sodium carbonate and bicarbonate concentration, to enhance biomass and lipid accumulation. Optimal productivity levels were observed with sodium bicarbonate addition of 3 g·L-1 and 1 g·L-1 for biomass and lipids, resulting in productivities of 392.64 and 53.57 mg·L-1·d-1, respectively. Results underlined the effectiveness of sodium carbonate and bicarbonate as inorganic carbon sources for stimulating microalgal growth and enhancing the production of high-value products. The extraction of lipids from freeze-dried biomass of M. gracile IFRPD 1061 demonstrated optimal yield using methanol/hexane solvents compared with the control experiments. Lipid extraction yields using methanol/hexane were 42.18% and 46.81% from oven-dried and freeze-dried biomass, respectively. Lipids extracted from oven-dried M. gracile IFRPD 1061 using methanol/hexane/chloroform solvents indicated the potential of methanol/hexane as a solvent for lipid extraction from dry microalgal biomass using an ultrasonic-assisted technique. This study contributes valuable insights into maximizing biofuel and bioproduct production from microalgae, highlighting A. gracilis as a promising candidate for industrial applications.

Bioremediation of Synthetic Wastewater with Contaminants of Emerging Concern by Nannochloropsis sp. and Lipid Production: A Circular Approach

Contaminants of emerging concern (CECs) pose a potential risk to human and environmental health. Microalgae bioremediation is a promising approach for transforming or removing contaminants from the environment, while contributing to the circular economy. In this study, Nannochloropsis sp. was effectively used for the simultaneous removal of six CECs: paracetamol, ibuprofen, imidacloprid, methylparaben and bisphenol A at 10 µg mL-1 and triclosan at 0.5 µg mL-1 from synthetic wastewater, which were able to survive under such concentrations, higher than those commonly found in the environment (up to 2.82 µg mL-1 of methylparaben). High removal efficiencies were reached for methylparaben (100%) and bisphenol A (93 ± 2%), while for imidacloprid, paracetamol and ibuprofen, 30 ± 1%, 64 ± 2% and 49 ± 5% were removed, respectively. Subsequently, lipids were extracted, and the FAME profile was characterised using GS-MS. The main fatty acids identified after bioremediation were hexadecadienoic acid isomers (C16:2), palmitic acid (C16), linoleic acid (C18:2) and γ-linolenic acid (C18:3). The absence of oleic acid and stearic acid was noticed, suggesting an alteration in the lipidic profile due to contaminant exposure. By exploring the quantification of fatty acids in future work, potential applications for the extracted lipids can be explored, further demonstrating the feasibility of this circular process.

Advances in CRISPR/Cas9 technology: shaping the future of photosynthetic microorganisms for biofuel production

Use of fossil fuels causes environmental issues due to its inefficiency and and imminent depletion. This has led to interest in identifying alternative and renewable energy sources such as biofuel generation from photosynthetic organisms. A wide variety of prokaryotic and eukaryotic microorganisms, known as microalgae, have the potential to be economical and ecologically sustainable in the manufacture of biofuels such as bio-hydrogen, biodiesel, bio-oils, and bio-syngas. By using contemporary bioengineering techniques, the innate potential of algae to produce biomass of superior quality may be enhanced. In algal biotechnology, directed genome modification via RNA-guided endonucleases is a new approach. CRISPR/Cas systems have recently been frequently used to modify the genetic makeup of several aquatic and freshwater microalgae. The majority of research has used the Cas9-driven Type II system, one of two classes and six unique kinds of CRISPR systems, to specifically target desired genes in algae, and knock them out and down, or both. Using CRISPR technology to modify its genetic makeup, microalgae has produced more biomass and increased in lipid content. This review highlights the attempts made so far to target microalgae genome modification, discusses the prospects for developing the CRISPR platform for large-scale genome modification of microalgae, and identifies the opportunities and challenges in the development and distribution of CRISPR/Cas9 components.

Microalgae-derived biolubricants: Challenges and opportunities

Lubricants are indispensable in the modern economy for controlling friction and wear across many industries. Traditional lubricants are derived from petroleum crude and can cause significant ecological impact if released into the environment. Microalgae have emerged as a potential alternative to petroleum crude for producing renewable and environmentally friendly biolubricants. This review systematically assesses recent developments in microalgal-based biolubricant production, including tribological performance, microalgae selection, cultivation, harvesting, lipid and polysaccharide extraction and conversion to biolubricants, and market development. Compared to petroleum-based lubricants in terms of tribological properties, biolubricants are compatible with most emerging applications, such as electric vehicles and wind turbines. Nevertheless, they are less thermally and chemically stable, thus, may not be suitable for some traditional applications such as internal combustion engines. Literature data corroborated in this study reveals an urgent need for further research to scale up microalgae production and lower the cost of biomass harvesting. While technologies for converting microalgae-derived lipids to biolubricants appear to be well established, additional work is necessary to also utilize polysaccharides as another key ingredient for producing biolubricants, especially for low-temperature applications. Extraction methods are well established but further research is also needed to reduce the ecological impact, especially to utilize green solvents and reduce solvent consumption. Additionally, future research should delve into the use of nanoparticles as effective additives to obtain microalgae-based biolubricants with superior properties. Finally, it is essential to standardize the labeling system of biolubricants to establish a global market.

Enhanced lipid accumulation in microalgae Scenedesmus sp. under nitrogen limitation

Microalgae-based biofuel production is cost-effective only in a biorefinery, where valuable co-products offset high costs. Fatty acids produced by photosynthetic microalgae can serve as raw materials for bioenergy and pharmaceuticals. This study aims to understand the metabolic imprints of Scenedesmus sp. CABeR52, to decipher the physiological mechanisms behind lipid accumulation under nitrogen deprivation. Metabolomics profiles were generated using gas chromatography-mass spectrometry (GC-MS) of Scenedesmus sp. CABeR52 subjected to nutrient deprivation. Our initial data sets indicate that deprived cells have an increased accumulation of lipids (278.31 mg.g-1 dcw), 2.0 times higher than the control. The metabolomic profiling unveils a metabolic reprogramming, highlighting the upregulation of key metabolites involved in fatty acid biosynthesis, such as citric acid, succinic acid, and 2-ketoglutaric acid. The accumulation of trehalose, a stress-responsive metabolite, further underscores the microalga's adaptability. Interestingly, we found that a new fatty acid, nervonic acid, was identified in the complex, which has a significant role in brain development. These findings provide valuable insights into the metabolic pathways governing lipid accumulation in Scenedesmus sp., paving the way for its exploitation as a sustainable biofuel feedstock.

Molecular design of microalgae as sustainable cell factories

Microalgae are regarded as sustainable and potent chassis for biotechnology. Their capacity for efficient photosynthesis fuels dynamic growth independent from organic carbon sources and converts atmospheric CO2 directly into various valuable hydrocarbon-based metabolites. However, approaches to gene expression and metabolic regulation have been inferior to those in more established heterotrophs (e.g., prokaryotes or yeast) since the genetic tools and insights in expression regulation have been distinctly less advanced. In recent years, however, these tools and their efficiency have dramatically improved. Various examples have demonstrated new trends in microalgal biotechnology and the potential of microalgae for the transition towards a sustainable bioeconomy.

Photosynthetic response of Chlamydomonas reinhardtii and Chlamydomonas sp. 1710 to zinc toxicity

Zinc (Zn) is an essential trace element but can lead to water contamination and ecological deterioration when present in excessive amounts. Therefore, investigating the photosynthetic response of microalgae to Zn stress is of great significance. In this study, we assessed the photosynthetic responses of neutrophilic Chlamydomonas reinhardtii and acidophilic Chlamydomonas sp. 1710 to Zn exposure for 96 h. The specific growth rate (μ), chlorophyll-a (Chl-a) content, and chlorophyll fluorescence parameters were determined. The results demonstrated that Chlamydomonas sp. 1710 was much more tolerant to Zn than C. reinhardtii, with the half-maximal inhibitory concentration (IC50) values of 225.4 mg/L and 23.4  mg/L, respectively. The μ and Chl-a content of C. reinhardtii decreased in the presence of 15  mg/L Zn, whereas those of Chlamydomonas sp. 1710 were unaffected by as high as 100  mg/L Zn. Chlorophyll fluorescence parameters indicated that the regulation of energy dissipation, including non-photochemical quenching, played a crucial role in Zn stress resistance for both Chlamydomonas strains. However, in the case of C. reinhardtii, non-photochemical quenching was inhibited by 5  mg/L Zn in the first 48 h, whereas for Chlamydomonas sp. 1710, it remained unaffected under 100  mg/L Zn. Chlamydomonas sp. 1710 also exhibited a 20 times stronger capacity for regulating the electron transfer rate than C. reinhardtii under Zn stress. The light energy utilization efficiency (α) of Chlamydomonas sp. 1710 had the most highly non-linear correlation with μ, indicating the energy utilization and regulation process of Chlamydomonas sp. 1710 was well protected under Zn stress. Collectively, our findings demonstrate that the photosystem of Chlamydomonas sp. 1710 is much more resilient and tolerant than that of C. reinhardtii under Zn stress.

Application of adaptive laboratory evolution for Yarrowia lipolytica: A comprehensive review

Adaptive laboratory evolution is an innovative approach utilized by researchers to enhance the characteristics of microorganisms in the field of biology. With the advancement of this technology, it is now being extended to non-model strains. Yarrowia lipolytica, an oleaginous yeast with significant industrial potential, stands out among the non-conventional fungi. However, the activity of Yarrowia lipolytica is frequently affected by specific substances and environmental factors, necessitating the development of techniques to address these challenges. This manuscript provides an overview of adaptive laboratory evolution experiments conducted on Yarrowia lipolytica, and categorizes the contents into two aspects including improving lignocellulose utilization and enhancing the production in Yarrowia lipolytica. Additionally, we selected several representative examples to illustrate how adaptive laboratory evolution can be combined with other techniques to elucidate the potential mechanisms underlying strain evolution. Lastly, we anticipate a promising future for adaptive laboratory evolution technology and Yarrowia lipolytica in tandem.

Biomass valorization of agriculture wastewater grown freshwater diatom Nitzschia sp. for metabolites, antibacterial activity, and biofertilizer

The sustainable utilization of agricultural wastewater is a major global challenge. This study evaluated the impact of agricultural fertilizer on the biomass potential of Nitzschia sp. for metabolite production, antibacterial activity, and slow release biofertilizer. Cultivation of Nitzschia sp. in agriculture wastewater (0.5 mg ml^-1) exhibited maximum cell density (12×10⁵ cells ml^-1), protein content (10.0 mg g^-1), and lipid content (14.96%). Carbohydrate and phenol content increases in a dose-dependent manner with 8.27 mg g^-1 and 2.05 mg g^-1 at a concentration of 2 mg ml^-1 respectively. There was a 2.1-fold increment in chrysolaminarin content. Both gram-negative and gram-positive bacteria were susceptible to the antibacterial activity of the biomass. The effects of using diatom biomass as a biofertilizer were evaluated on the growth of periwinkle plants, which showed significant improvements in leaf development, branching at an early stage, flowering, and a marked increase in shoot length. Diatom biorefinery holds immense potential in addressing agriculture wastewater recycling and sustainable generation of high-value compounds.

Microalgal Feedstock for Biofuel Production: Recent Advances, Challenges, and Future Perspective

Globally, nations are trying to address environmental issues such as global warming and climate change, along with the burden of declining fossil fuel reserves. Furthermore, countries aim to reach zero carbon emissions within the existing and rising global energy crisis. Therefore, bio-based alternative sustainable feedstocks are being explored for producing bioenergy. One such renewable energy resource is microalgae; these are photosynthetic microorganisms that grow on non-arable land, in extreme climatic conditions, and have the ability to thrive even in sea and wastewater. Microalgae have high photosynthetic efficiencies and biomass productivity compared to other terrestrial plants. Whole microalgae biomass or their extracted metabolites can be converted to various biofuels such as bioethanol, biodiesel, biocrude oil, pyrolytic bio-oil, biomethane, biohydrogen, and bio jet fuel. However, several challenges still exist before faster and broader commercial application of microalgae as a sustainable bioenergy feedstock for biofuel production. Selection of appropriate microalgal strains, development of biomass pre-concentrating techniques, and utilization of wet microalgal biomass for biofuel production, coupled with an integrated biorefinery approach for producing value-added products, could improve the environmental sustainability and economic viability of microalgal biofuel. This article will review the current status of research on microalgal biofuels and their future perspective.