Androgenesis-Based Doubled Haploidy: Past, Present, and Future Perspectives

Establishment and maintenance of embryogenic cell fate during microspore embryogenesis

Microspore embryogenesis is a type of in vitro totipotency in which the immature male gametophyte (pollen) develops into a haploid embryo after an abiotic stress treatment. In Brassica napus, heat-stress treatment of male gametophytes induces the development of different types of multicellular embryogenic structures, each with different cellular characteristics and the capacity to form a differentiated embryo. The origin and early development of these different embryogenic structures have not been determined. We used two-photon excitation fluorescence microscopy and time-lapse imaging of cells expressing either a LEAFY COTYLEDON1 (LEC1) embryo identity reporter or a DR5v2 auxin response reporter to follow the development of embryogenic structures starting at the single- to few-cell stage. We show for the first time that the developmental fate of embryogenic structures is defined by the symmetry of the first embryogenic division and that the division plane also predicts the timing of subsequent pollen wall (exine) rupture: suspensorless embryos develop after a symmetric division and undergo late exine rupture, while suspensor-bearing embryos and embryogenic callus develop after an asymmetric division and undergo early exine rupture. Live imaging also captured previously unknown dynamic LEC1 and DR5v2 expression patterns that are associated with changes in exine integrity. This study highlights the developmental plasticity of cultured pollen and uncovers new roles for the first embryogenic cell division plane and the exine in defining and maintaining cell fate during microspore embryogenesis.

Genome-wide association study of haploid female fertility (HFF) and haploid male fertility (HMF) in BS39-derived doubled haploid maize lines

KEY MESSAGE

Restoration of haploid female and haploid male fertility without colchicine is feasible. Three SNPs and eight gene models for HFF, and one SNP and a gene model for HMF were identified. Doubled haploid (DH) breeding accelerates the development of elite inbred lines and facilitates the incorporation of exotic germplasm, offering a powerful tool for maize improvement. Traditional DH breeding relies on colchicine to induce haploid genome doubling. Colchicine is toxic, and its application is labor-intensive, with most genotypes recording low genome doubling rates (10-30%). This study investigates spontaneous haploid genome doubling (SHGD) as a safer and more efficient alternative to colchicine. We evaluated the effectiveness of SHGD in restoring haploid female fertility (HFF) and haploid male fertility (HMF) without colchicine. Using genome-wide association studies (GWAS), we identified genomic regions influencing HFF and HMF. The plant materials included the BS39-haploid isogenic lines (HILs) and BS39-SHGD-haploid isogenic lines (HILs). Our results revealed significant SNP associations for both traits, with candidate genes involved in cell cycle regulation, cytoskeletal organization, and hormonal signaling. Analysis of variance (ANOVA) revealed significant variation in HFF across haploids and two environments. Similarly, HMF showed substantial differences across haploids and between the two environments. Spearman correlation between HFF and HMF showed no correlation (r = -0.03) between the two traits. HFF showed high heritability (0.8), indicating strong genetic control, whereas HMF displayed moderate heritability (0.5), suggesting additional environmental influences. The findings underscore the potential of SHGD to enhance DH breeding efficiency and support the development of new maize varieties tailored to diverse agricultural needs.

Quantifying Genetic Parameters for Blackleg Resistance in Rapeseed: A Comparative Study

Selection is a fundamental part of the plant breeding process, enabling the identification and development of varieties with desirable traits. Thanks to advances in genetics and biotechnology, the selection process has become more precise and efficient, resulting in faster breeding progress and better adaptation of crops to environmental challenges. Genetic parameters related to gene additivity and epistasis play a key role and can influence decisions on the suitability of breeding material. In this study, 188 rapeseed doubled haploid lines were assessed in field conditions for resistance to Leptosphaeria spp. Through next-generation sequencing, a total of 133,764 molecular markers (96,121 SilicoDArT and 37,643 SNP) were obtained. The similarity of the DH lines at the phenotypic and genetic levels was calculated. The results indicate that the similarity at the phenotypic level was markedly different from the similarity at the genetic level. Genetic parameters related to additive gene action effects and epistasis (double and triple) were calculated using two methods: based on phenotypic observations only and using molecular marker observations. All evaluated genetic parameters (additive, additive-additive and additive-additive-additive) were statistically significant for both estimation methods. The parameters associated with the interaction (double and triple) had opposite signs depending on the estimation method.

Generic Workflow of a Highly Effective and Easy Anther Culture Method for Both Japonica and Indica Rice

As one of the most important staple crops in the world, rice plays a pivotal role in world food security. The creation of doubled haploids based on anther culture is an important technology for rice breeding. However, at present, rice anther culture technology still faces many problems, such as genotype dependency, especially genotypes of indica rice. In this study, fifteen rice genotypes, including twelve japonica rice genotypes and three indica rice genotypes, were randomly selected and used to study anther culture by using a modified M8 medium. The results showed that the total callus induction rates of these different rice genotypes ranged from 0.81 to 13.95%, with an average of 6.64%, while the callus induction rates calculated for the top ten highest callus inductions for each rice genotype ranged from 2.75 to 17.00%, with an average of 10.56%. There were varying gaps between the total callus induction rates and the callus induction rates in these different rice genotypes. The fact that the gaps for some rice genotypes were relatively large indicated that standard tiller or anther collection was not applicable to all rice genotypes and that there was still a lot of room for improvement in the callus induction rate of some rice genotypes through optimization of the sampling method. The plantlet regeneration rates ranged from 12.55 to 456.54%, with an average of 200.10%. Although there were many albinos from anther culture for some rice genotypes, these would still meet the requirement if the rice genotypes had higher callus induction rates or regeneration rates. The percentages of seed setting of regenerated green seedlings ranged from 14% to 84%, with an average of 48.73%. Genetic diversity analysis showed that the genetic background of these different rice genotypes was representative, and the phylogenetic tree and Principal Component Analysis (PCA) divided them into indica and japonica types. Therefore, in this study, an anther culture method suitable for both indica and japonica rice genotypes was established, which could improve doubled haploid breeding in rice.

Apomixis and the paradox of sex in plants

BACKGROUND

The predominance of sex in eukaryotes, despite the high costs of meiosis and mating, remains an evolutionary enigma. Many theories have been proposed, none of them being conclusive on its own, and they are, in part, not well applicable to land plants. Sexual reproduction is obligate in embryophytes for the great majority of species.

SCOPE

This review compares the main forms of sexual and asexual reproduction in ferns and angiosperms, based on the generation cycling of sporophyte and gametophyte (leaving vegetative propagation aside). The benefits of sexual reproduction for maintenance of genomic integrity in comparison to asexuality are discussed in the light of developmental, evolutionary, genetic and phylogenetic studies.

CONCLUSIONS

Asexual reproduction represents modifications of the sexual pathway, with various forms of facultative sexuality. For sexual land plants, meiosis provides direct DNA repair mechanisms for oxidative damage in reproductive tissues. The ploidy alternations of meiosis-syngamy cycles and prolonged multicellular stages in the haploid phase in the gametophytes provide a high efficiency of purifying selection against recessive deleterious mutations. Asexual lineages might buffer effects of such mutations via polyploidy and can purge the mutational load via facultative sexuality. The role of organelle-nuclear genome compatibility for maintenance of genome integrity is not well understood. In plants in general, the costs of mating are low because of predominant hermaphroditism. Phylogenetic patterns in the archaeplastid clade suggest that high frequencies of sexuality in land plants are concomitant with a stepwise increase of intrinsic and extrinsic stress factors. Furthermore, expansion of genome size in land plants would increase the potential mutational load. Sexual reproduction appears to be essential for keeping long-term genomic integrity, and only rare combinations of extrinsic and intrinsic factors allow for shifts to asexuality.

Haploid identification in maize

Doubled haploid (DH) line production through in vivo maternal haploid induction is widely adopted in maize breeding programs. The established protocol for DH production includes four steps namely in vivo maternal haploid induction, haploid identification, genome doubling of haploid, and self-fertilization of doubled haploids. Since modern haploid inducers still produce relatively small portion of haploids among undesirable hybrid kernels, haploid identification is typically laborious, costly, and time-consuming, making this step the second foremost in the DH technique. This manuscript reviews numerous methods for haploid identification from different approaches including the innate differences in haploids and diploids, biomarkers integrated in haploid inducers, and automated seed sorting. The phenotypic differentiation, genetic basis, advantages, and limitations of each biomarker system are highlighted. Several approaches of automated seed sorting from different research groups are also discussed regarding the platform or instrument used, sorting time, accuracy, advantages, limitations, and challenges before they go through commercialization. The past haploid selection was focusing on finding the distinguishable marker systems with the key to effectiveness. The current haploid selection is adopting multiple reliable biomarker systems with the key to efficiency while seeking the possibility for automation. Fully automated high-throughput haploid sorting would be promising in near future with the key to robustness with retaining the feasible level of accuracy. The system that can meet between three major constraints (time, workforce, and budget) and the sorting scale would be the best option.

Embryo Rescue in Plant Breeding

Embryo rescue (ER) techniques are among the oldest and most successful in vitro tissue culture protocols used with plant species. ER refers to a series of methods that promote the development of an immature or lethal embryo into a viable plant. Intraspecific, interspecific, or intergeneric crosses allow the introgression of important alleles of agricultural interest from wild species, such as resistance or tolerance to abiotic and biotic stresses or morphological traits in crops. However, pre-zygotic and post-zygotic reproductive barriers often present challenges in achieving successful hybridization. Pre-zygotic barriers manifest as incompatibility reactions that hinder pollen germination, pollen tube growth, or penetration into the ovule occurring in various tissues, such as the stigma, style, or ovary. To overcome these barriers, several strategies are employed, including cut-style or graft-on-style techniques, the utilization of mixed pollen from distinct species, placenta pollination, and in vitro ovule pollination. On the other hand, post-zygotic barriers act at different tissues and stages ranging from early embryo development to the subsequent growth and reproduction of the offspring. Many crosses among different genera result in embryo abortion due to the failure of endosperm development. In such cases, ER techniques are needed to rescue these hybrids. ER holds great promise for not only facilitating successful crosses but also for obtaining haploids, doubled haploids, and manipulating the ploidy levels for chromosome engineering by monosomic and disomic addition as well substitution lines. Furthermore, ER can be used to shorten the reproductive cycle and for the propagation of rare plants. Additionally, it has been repeatedly used to study the stages of embryonic development, especially in embryo-lethal mutants. The most widely used ER procedure is the culture of immature embryos taken and placed directly on culture media. In certain cases, the in vitro culture of ovule, ovaries or placentas enables the successful development of young embryos from the zygote stage to maturity.

Development of In Vitro Anther Culture for Doubled Haploid Plant Production in Indica Rice (Oryza sativa L.) Genotypes

Anther culture is an efficient biotechnological tool in modern plant breeding programs to produce new varieties and parental lines in hybrid seed productions. However, some bottlenecks-low induction rate, genotype dependency, albinism-restrict the widespread utilization of in vitro anther culture in rice breeding, especially in Oryza sativa ssp. indica (indica) genotypes, while an improved efficient protocol can shorten the process of breeding. Three different induction media (N₆NDK_, N₆NDZ, Ali-1) and four plant regeneration media (mMSNBK1, MSNBK3, MSNBKZ1, MSNBKZ2) were tested with five indica rice genotypes to increase the efficiency of in vitro androgenesis (number of calli and regenerated green plantlets). The production of calli was more efficient on the N₆NDK medium with an average 88.26 calli/100 anthers and N₆NDZ medium with an average of 103.88 calli/100 anthers as compared to Ali-1 with an average of 6.96 calli/100 anthers. The production of green plantlets was greater when calli was produced on N₆NDK medium (2.15 green plantlets/100 anthers) compared when produced on to N₆NDZ medium (1.18 green plantlets/100 anthers). Highest green plantlets production (4.7 green plantlets/100 anthers) was achieved when mMSNBK1 plant regeneration medium was used on calli produced utilizing N₆NDK induction medium. In the best overall treatment (N₆NDK induction medium and mMSNBK1 plant regeneration medium), four tested genotypes produced green plantlets. However, the genotype influenced the efficiency, and the green plantlets production ranged from 0.4 green plantlets/100 anthers to 8.4 green plantlets/100 anthers. The ploidy level of 106 acclimatized indica rice plantlets were characterized with flow cytometric analyses to calculate the percentage of spontaneous chromosome doubling. Altogether, 48 haploid-, 55 diploid-, 2 tetraploid- and 1 mixoploid plantlets were identified among the regenerant plantlets, and the spontaneous chromosome doubling percentage was 51.89%. Utilization of DH plants have been integrated as a routine method in the Hungarian rice breeding program. The tetraploid lines can be explored for their potential to offer new scopes for rice research and breeding directions in the future.

The Roads to Haploid Embryogenesis

Although zygotic embryogenesis is usually studied in the field of seed biology, great attention has been paid to the methods used to generate haploid embryos due to their applications in crop breeding. These mainly include two methods for haploid embryogenesis: in vitro microspore embryogenesis and in vivo haploid embryogenesis. Although microspore culture systems and maize haploid induction systems were discovered in the 1960s, little is known about the molecular mechanisms underlying haploid formation. In recent years, major breakthroughs have been made in in vivo haploid induction systems, and several key factors, such as the matrilineal (MTL), baby boom (BBM), domain of unknown function 679 membrane protein (DMP), and egg cell-specific (ECS) that trigger in vivo haploid embryo production in both the crops and Arabidopsis models have been identified. The discovery of these haploid inducers indicates that haploid embryogenesis is highly related to gamete development, fertilization, and genome stability in ealry embryos. Here, based on recent efforts to identify key players in haploid embryogenesis and to understand its molecular mechanisms, we summarize the different paths to haploid embryogenesis, and we discuss the mechanisms of haploid generation and its potential applications in crop breeding. Although these haploid-inducing factors could assist egg cells in bypassing fertilization to initiate embryogenesis or trigger genome elimination in zygotes after fertilization to form haploid embryos, the fertilization of central cells to form endosperms is a prerequisite step for haploid formation. Deciphering the molecular and cellular mechanisms for haploid embryogenesis, increasing the haploid induction efficiency, and establishing haploid induction systems in other crops are critical for promoting the application of haploid technology in crop breeding, and these should be addressed in further studies.

Improvement of Anther Culture to integrate Doubled Haploid Technology in Temperate Rice (Oryza sativa L.) Breeding

Doubled haploid (DH) plant production, such as anther culture (AC), is an effective tool used in modern rice breeding programs. The improved efficient protocols applied can shorten the process of breeding. The effect of combinations of plant growth regulators (2.5 mg/L NAA, 1 mg/L 2,4-D and 0.5 mg/L kinetin; 2 mg/L 2,4-D and 0.5 mg/L BAP) in the induction medium were compared in AC for five rice breeding materials and combinations. Induction of calli ranged from 264.6 ± 67.07 to 468.8 ± 123.2 calli/100 anthers in AC of rice genotypes. Two basal media (MS and N₆) and two combinations of growth regulators (1 mg/L NAA, 1 mg/L BAP and 1 mg/L kinetin; 1.5 mg/L BAP, 0.5 mg/L NAA and 0.5 mg/L kinetin) were used as regeneration media. The in vitro green plant production was the highest with the application of the N₆NDK induction medium (NAA, 2,4-D and kinetin) and the MS-based regeneration medium (1 mg/L NAA, 1 mg/BAP and 1 mg/L kinetin) in anther culture of the '1009' genotype (95.2 green plantlets/100 anthers). The mean of five genotypes was 24.48 green plantlets/100 anthers for the best treatment. Flow cytometric analyses conducted identified the microspore origin of the haploid calli produced in AC, while the uniformity of spontaneous DH plants was checked in the DH₁ and DH₂ generations. Spontaneous chromosome doubling ranged from 38.1% to 57.9% (mean 42.1%), depending on the breeding source. The generated and selected DH lines were tested in micro- and small-plot field experiments to identify promising lines for a pedigree breeding program. The improved AC method was integrated in a Hungarian temperate rice pedigree breeding program.

Genetic Augmentation of Legume Crops Using Genomic Resources and Genotyping Platforms for Nutritional Food Security

Recent advances in next generation sequencing (NGS) technologies have led the surge of genomic resources for the improvement legume crops. Advances in high throughput genotyping (HTG) and high throughput phenotyping (HTP) enable legume breeders to improve legume crops more precisely and efficiently. Now, the legume breeder can reshuffle the natural gene combinations of their choice to enhance the genetic potential of crops. These genomic resources are efficiently deployed through molecular breeding approaches for genetic augmentation of important legume crops, such as chickpea, cowpea, pigeonpea, groundnut, common bean, lentil, pea, as well as other underutilized legume crops. In the future, advances in NGS, HTG, and HTP technologies will help in the identification and assembly of superior haplotypes to tailor the legume crop varieties through haplotype-based breeding. This review article focuses on the recent development of genomic resource databases and their deployment in legume molecular breeding programmes to secure global food security.

Establishment of a dmp based maternal haploid induction system for polyploid Brassica napus and Nicotiana tabacum

Doubled haploid (DH) technology is used to obtain homozygous lines in a single generation, a technique that significantly accelerates the crop breeding trajectory. Traditionally, in vitro culture is used to generate DHs, but this technique is limited by species and genotype recalcitrance. In vivo haploid induction (HI) through seed is widely and efficiently used in maize and was recently extended to several other crops. Here we show that in vivo HI can be triggered by mutation of DMP maternal haploid inducer genes in allopolyploid (allotetraploid) Brassica napus and Nicotiana tabacum. We developed a pipeline for selection of DMP orthologs for clustered regularly interspaced palindromic repeats mutagenesis and demonstrated average amphihaploid induction rates of 2.4% and 1.2% in multiple B. napus and N. tabacum genotypes, respectively. These results further confirmed the HI ability of DMP gene in polyploid dicot crops. The DMP-HI system offers a novel DH technology to facilitate breeding in these crops. The success of this approach and the conservation of DMP genes in dicots suggest the broad applicability of this technique in other dicot crops.

P, B. N. D, Samantaray S. Androgenesis in indica rice: A comparative competency in development of doubled haploids

Rice is critical to global food security which demands immediate attention to meet the ever-growing population. Development of improved variety is the major focus area of research, in which doubled haploid (DH) technology plays a vital role. Since, androgenesis shows its potential in DH production, this method was not capitalized specially in indica rice due to due to its recalcitrant nature to tissue culture. Success of androgenesis is governed by many important factors such as stage of anther, pre-treatment conditions, accurate concentrations of media, and plant growth regulators. Though reports of androgenesis are abundant in rice, most of them either used japonica or a specific cultivar of indica rice ecotypes. In this study, a media combination was established which is successful in producing doubled haploids from F₁s of Savitri x Pokkali, IR20 x Mahulata along with the popular indica hybrids of Arize 8433DT, Arize 6453, Arize Bold, and Swift Gold. Out of 12 different media combinations tested, and 5 different durations of cold-treatments studied, N6 media with 2,4-D (2.0 mg/l) and BAP (0.5 mg/l) with 7^th day cold pre-treatment was found to be most effective in all of the F₁s for callus induction. Among all the F₁s, rice hybrid, Arize 8433DT showed highest of 52% callus induction. In case of green shoot regeneration, MS media with NAA (0.5 mg/l), BAP (2.0 mg/l) and Kn (1.0 mg/l) (MS+C4) was found to be the most efficient of six treatments studied with highest of 58.25% regeneration in Arize 8433DT. Further, MS+C4 in combination with proline (5.0 mg/l) increased the regeneration rate to 85.99%. Besides, MS media with NAA (1.0 mg/l), Kn (0.1 mg/l) and 50 g/l sucrose was found to be most efficient for supporting root induction in all F1s. This study claims the establishment of genotype independent androgenic protocol for indica rice which could be capitalized in indica rice improvement.