A sheep model for cancellous bone healing

Equine subchondral lucencies: Knowledge from the medial femoral condyle

Equine subchondral lucencies (SCL) have been described since the first availability of suitable radiographic equipment. The initial clinical sign can be lameness, but SCLs are often first found on surveys of juvenile horses and are primarily a radiographic concern for public auctions. When lameness is present, it varies from subtle to obvious and can be intermittent. Some SCLs heal spontaneously, and some remain blemishes, but when the SCL and lameness are persistent, further damage to the joint and limitations to an athletic career are likely. SCLs were initially described in the distal limb followed by the stifle, and the medial femoral condyle (MFC) is now considered the most common location. The aim of this review is to highlight the initial pathology and discuss the clinical and experimental information available on equine SCLs. SCL treatment has evolved from rest alone and has progressed to debridement, grafting, intralesional injection, and most recently, transcondylar screw and absorbable implant placement. Comparison of success rates between techniques is difficult due to variations in follow-up and outcome measures, and no single technique is best for all SCLs. Treatment appears to increase success by 15%-20% over rest alone, but the method chosen depends on many factors. This review emphasizes the need for further work to fully understand SCL formation and all aspects of trabecular bone healing to optimize surgical therapy and improve treatment success.

Comparison of bone formation mediated by bone morphogenetic protein delivered by nanoclay gels with clinical techniques (autograft and InductOs®) in an ovine bone model

Development of a growth factor delivery vehicle providing appropriate temporal-spatial release together with an appropriate preclinical large animal model to evaluate bone formation is critical in the development of delivery strategies for bone tissue regeneration. Smectite nanoclays such as LAPONITE™ possess unique thixotropic and protein retention properties offering promise for use in growth factor delivery in bone repair and regeneration. This study has examined bone formation mediated by a clinically approved growth factor delivery system (InductOs®) in combination with Laponite gel in an aged female ovine femoral condyle defect preclinical model (10 weeks). Two different designs, one containing a low volume of Laponite gel (LLG) in combination with the InductOs® absorbable collagen sponge (ACS), the other in which Laponite gel formed the implant (HLG), were compared against InductOs® alone and an autograft positive control. Thus, five groups: (i) empty defect, (ii) autograft, (iii) BMP2 + ACS, (iv) BMP2 + ACS + LLG and (v) BMP2 + HLG + ACS were examined in 9 mm × 12 mm defects performed bilaterally in the medial femoral condyles of 24 aged (>5 years) sheep. Bone formation within the defect was assessed using micro-computed tomography (micro-CT), digital volume correlation (DVC) for biomechanical characterisation as well as histology. The autograft and InductOs® mediated enhanced bone formation (p < 0001) compared to blank controls, while no significant differences were observed between the Laponite/Collagen/BMP delivery vehicles. However, the current study illustrated the excellent biocompatibility of Laponite and its ability to deliver localised active BMP-2, with the opportunity for improved efficacy with further optimisation. Interestingly, DVC-computed strain distributions indicated that the regenerated bone structure is mechanically adapted to bear external loads from the early remodelling stages of the bone reparation cascade. The current studies of selected nanoclay delivery platforms for BMP, assessed in a clinically relevant large animal model auger well for the development of bone fracture therapeutics for an ageing population.

The Sheep as a Large Animal Model for the Investigation and Treatment of Human Disorders

Simple Summary

We review the value of large animal models for improving the translation of biomedical research for human application, focusing primarily on sheep.

Abstract

An essential aim of biomedical research is to translate basic science information obtained from preclinical research using small and large animal models into clinical practice for the benefit of humans. Research on rodent models has enhanced our understanding of complex pathophysiology, thus providing potential translational pathways. However, the success of translating drugs from pre-clinical to clinical therapy has been poor, partly due to the choice of experimental model. The sheep model, in particular, is being increasingly applied to the field of biomedical research and is arguably one of the most influential models of human organ systems. It has provided essential tools and insights into cardiovascular disorder, orthopaedic examination, reproduction, gene therapy, and new insights into neurodegenerative research. Unlike the widely adopted rodent model, the use of the sheep model has an advantage over improving neuroscientific translation, in particular due to its large body size, gyrencephalic brain, long lifespan, more extended gestation period, and similarities in neuroanatomical structures to humans. This review aims to summarise the current status of sheep to model various human diseases and enable researchers to make informed decisions when considering sheep as a human biomedical model.

Biodegradable interbody cages for lumbar spine fusion: Current concepts and future directions

Lumbar fusion often remains the last treatment option for various acute and chronic spinal conditions, including infectious and degenerative diseases. Placement of a cage in the intervertebral space has become a routine clinical treatment for spinal fusion surgery to provide sufficient biomechanical stability, which is required to achieve bony ingrowth of the implant. Routinely used cages for clinical application are made of titanium (Ti) or polyetheretherketone (PEEK). Ti has been used since the 1980s; however, its shortcomings, such as impaired radiographical opacity and higher elastic modulus compared to bone, have led to the development of PEEK cages, which are associated with reduced stress shielding as well as no radiographical artefacts. Since PEEK is bioinert, its osteointegration capacity is limited, which in turn enhances fibrotic tissue formation and peri-implant infections. To address shortcomings of both of these biomaterials, interdisciplinary teams have developed biodegradable cages. Rooted in promising preclinical large animal studies, a hollow cylindrical cage (Hydrosorb™) made of 70:30 poly-l-lactide-co-d, l-lactide acid (PLDLLA) was clinically studied. However, reduced bony integration and unfavourable long-term clinical outcomes prohibited its routine clinical application. More recently, scaffold-guided bone regeneration (SGBR) with application of highly porous biodegradable constructs is emerging. Advancements in additive manufacturing technology now allow the cage designs that match requirements, such as stiffness of surrounding tissues, while providing long-term biomechanical stability. A favourable clinical outcome has been observed in the treatment of various bone defects, particularly for 3D-printed composite scaffolds made of medical-grade polycaprolactone (mPCL) in combination with a ceramic filler material. Therefore, advanced cage design made of mPCL and ceramic may also carry initial high spinal forces up to the time of bony fusion and subsequently resorb without clinical side effects. Furthermore, surface modification of implants is an effective approach to simultaneously reduce microbial infection and improve tissue integration. We present a design concept for a scaffold surface which result in osteoconductive and antimicrobial properties that have the potential to achieve higher rates of fusion and less clinical complications. In this review, we explore the preclinical and clinical studies which used bioresorbable cages. Furthermore, we critically discuss the need for a cutting-edge research program that includes comprehensive preclinical in vitro and in vivo studies to enable successful translation from bench to bedside. We develop such a conceptual framework by examining the state-of-the-art literature and posing the questions that will guide this field in the coming years.

Role of animal models in biomedical research: a review

The animal model deals with the species other than the human, as it can imitate the disease progression, its’ diagnosis as well as a treatment similar to human. Discovery of a drug and/or component, equipment, their toxicological studies, dose, side effects are in vivo studied for future use in humans considering its’ ethical issues. Here lies the importance of the animal model for its enormous use in biomedical research. Animal models have many facets that mimic various disease conditions in humans like systemic autoimmune diseases, rheumatoid arthritis, epilepsy, Alzheimer’s disease, cardiovascular diseases, Atherosclerosis, diabetes, etc., and many more. Besides, the model has tremendous importance in drug development, development of medical devices, tissue engineering, wound healing, and bone and cartilage regeneration studies, as a model in vascular surgeries as well as the model for vertebral disc regeneration surgery. Though, all the models have some advantages as well as challenges, but, present review has emphasized the importance of various small and large animal models in pharmaceutical drug development, transgenic animal models, models for medical device developments, studies for various human diseases, bone and cartilage regeneration model, diabetic and burn wound model as well as surgical models like vascular surgeries and surgeries for intervertebral disc degeneration considering all the ethical issues of that specific animal model. Despite, the process of using the animal model has facilitated researchers to carry out the researches that would have been impossible to accomplish in human considering the ethical prohibitions.

Mineralization in a Critical Size Bone-Gap in Sheep Tibia Improved by a Chitosan-Calcium Phosphate-Based Composite as Compared to Predicate Device

Deacetylated chitin derivatives have been widely studied for tissue engineering purposes. This study aimed to compare the efficacy of an injectable product containing a 50% deacetylated chitin derivative (BoneReg-Inject™) and an existing product (chronOS Inject^®) serving as a predicate device. A sheep model with a critical size drill hole in the tibial plateau was used. Holes of 8 mm diameter and 30 mm length were drilled bilaterally into the proximal area of the tibia and BoneReg-Inject™ or chronOS Inject^® were injected into the right leg holes. Comparison of resorption and bone formation in vivo was made by X-ray micro-CT and histological evaluation after a live phase of 12 weeks. Long-term effects of BoneReg-Inject™ were studied using a 13-month live period. Significant differences were observed in (1) amount of new bone within implant (p < 0.001), higher in BoneReg-Inject^TM, (2) signs of cartilage tissue (p = 0.003), more pronounced in BoneReg-Inject^TM, and (3) signs of fibrous tissue (p < 0.001), less pronounced in BoneReg-Inject^TM. Mineral content at 13 months postoperative was significantly higher than at 12 weeks (p < 0.001 and p < 0.05, for implant core and rim, respectively). The data demonstrate the potential of deacetylated chitin derivatives to stimulate bone formation.

Large Animal Model of Osteoporotic Defect Healing: An Alternative to Metaphyseal Defect Model

Osteoporosis is a common metabolic disorder diagnosed by lower bone density and higher risk of fracture. Fragility fractures because of osteoporosis are associated with high mortality rate. Deep understanding of fracture healing in osteoporosis is important for successful treatment. Therefore, the FDA approved the use of small and large animal models for preclinical testing. This study investigated the clinical relevance of a fracture defect model in the iliac crest of the osteoporotic sheep model and its several advantages over other models. The osteoporosis was achieved using ovariectomy (OVX) in combination with diet deficiency (OVXD) and steroid administration (OVXDS). Fluorochrome was injected to examine the rate of bone remodelling and bone mineralization. The defect areas were collected and embedded in paraffin and polymethyl metha acrylate (PMMA) for histological staining. OVXDS showed significantly lower bone mineral density (BMD) and bone mineral content (BMC) at all time points. Furthermore, variations in healing patterns were noticed, while the control, OVX and OVXD showed complete healing after 8 months. Bone quality was affected mostly in the OVXDS group showing irregular trabecular network, lower cortical bone thickness and higher cartilaginous tissue at 8 months. The mineral deposition rate showed a declining pattern in the control, OVX, and OVXD from 5 months to 8 months. One the contrary, the OVXDS group showed an incremental pattern from 5 months to 8 months. The defect zone in osteoporotic animals showed impaired healing and the control showed complete healing after 8 months. This unique established model serves as a dual-purpose model and has several advantages: no intraoperative and postoperative complications, no need for fixation methods for biomaterial testing, and reduction in animal numbers, which comply with 3R principles by using the same animal at two different time points.

Systematic Review of the Preclinical Technology Readiness of Orthopedic Gene Therapy and Outlook for Clinical Translation

Bone defects and improper healing of fractures are an increasing public health burden, and there is an unmet clinical need in their successful repair. Gene therapy has been proposed as a possible approach to improve or augment bone healing with the potential to provide true functional regeneration. While large numbers of studies have been performed in vitro or in vivo in small animal models that support the use of gene therapy for bone repair, these systems do not recapitulate several key features of a critical or complex fracture environment. Larger animal models are therefore a key step on the path to clinical translation of the technology. Herein, the current state of orthopedic gene therapy research in preclinical large animal models was investigated based on performed large animal studies. A summary and an outlook regarding current clinical studies in this sector are provided. It was found that the results found in the current research literature were generally positive but highly methodologically inconsistent, rendering a comparison difficult. Additionally, factors vital for translation have not been thoroughly addressed in these model systems, and the risk of bias was high in all reviewed publications. These limitations directly impact clinical translation of gene therapeutic approaches due to lack of comparability, inability to demonstrate non-inferiority or equivalence compared with current clinical standards, and lack of safety data. This review therefore aims to provide a current overview of ongoing preclinical and clinical work, potential bottlenecks in preclinical studies and for translation, and recommendations to overcome these to enable future deployment of this promising technology to the clinical setting.

A systematic review of preclinical in vivo testing of 3D printed porous Ti6Al4V for orthopedic applications, part I: Animal models and bone ingrowth outcome measures

For Ti6Al4V orthopedic and spinal implants, osseointegration is often achieved using complex porous geometries created via additive manufacturing (AM). While AM porous titanium (pTi) has shown clinical success, concerns regarding metallic implants have spurred interest in alternative AM biomaterials for osseointegration. Insights regarding the evaluation of these new materials may be supported by better understanding the role of preclinical testing for AM pTi. We therefore asked: (a) What animal models have been most commonly used to evaluate AM porous Ti6Al4V for orthopedic bone ingrowth; (b) What were the primary reported quantitative outcome measures for these models; and (c) What were the bone ingrowth outcomes associated with the most frequently used models? We performed a systematic literature search and identified 58 articles meeting our inclusion criteria. We found that AM pTi was evaluated most often using rabbit and sheep femoral condyle defect (FCD) models. Additional ingrowth models including transcortical and segmental defects, spinal fusions, and calvarial defects were also used with various animals based on the study goals. Quantitative outcome measures determined via histomorphometry including ''bone ingrowth'' (range: 3.92-53.4% for rabbit/sheep FCD) and bone-implant contact (range: 9.9-59.7% for rabbit/sheep FCD) were the most common. Studies also used 3D imaging to report outcomes such as bone volume fraction (BV/TV, range: 4.4-61.1% for rabbit/sheep FCD), and push-out testing for outcomes such as maximum removal force (range: 46.6-3092 N for rabbit/sheep FCD). Though there were many commonalities among the study methods, we also found significant heterogeneity in the outcome terms and definitions. The considerable diversity in testing and reporting may no longer be necessary considering the reported success of AM pTi across all model types and the ample literature supporting the rabbit and sheep as suitable small and large animal models, respectively. Ultimately, more standardized animal models and reporting of bone ingrowth for porous AM materials will be useful for future studies.

An overview of de novo bone generation in animal models

Some of the earliest success in de novo tissue generation was in bone tissue, and advances, facilitated by the use of endogenous and exogenous progenitor cells, continue unabated. The concept of one health promotes shared discoveries among medical disciplines to overcome health challenges that afflict numerous species. Carefully selected animal models are vital to development and translation of targeted therapies that improve the health and well-being of humans and animals alike. While inherent differences among species limit direct translation of scientific knowledge between them, rapid progress in ex vivo and in vivo de novo tissue generation is propelling revolutionary innovation to reality among all musculoskeletal specialties. This review contains a comparison of bone deposition among species and descriptions of animal models of bone restoration designed to replicate a multitude of bone injuries and pathology, including impaired osteogenic capacity.

Bone union formation in the rat mandibular symphysis using hydroxyapatite with or without simvastatin: effects on healthy, diabetic, and osteoporotic rats

OBJECTIVE

The objective is to compare new bone formation in critical defects in healthy, diabetic, and osteoporotic rats filled with hydroxyapatite (HA) alone and HA combined with simvastatin (SV).

MATERIALS AND METHODS

A total of 48 adult female Sprague-Dawley rats were randomized into three groups (n = 16 per group): Group, 1 healthy; Group 2, diabetics; and Group 3, osteoporotics. Streptozotocin was used to induce type 1 diabetes in Group 2, while bilateral ovariectomy was used to induce osteoporosis in Group 3. The central portion of the rat mandibular symphysis was used as a physiological critical bone defect. In each group, eight defects were filled with HA alone and eight with HA combined with SV. The animals were sacrificed at 4 and 8 weeks, and the mandibles were processed for micro-computed tomography to analyze radiological union and bone mineral density (BMD); histological analysis of the bone union; and immunohistochemical analysis, which included immunoreactivity of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP-2).

RESULTS

In all groups (healthy, diabetics, and osteoporotics), the defects filled with HA + SV presented greater radiological bone union, BMD, histological bone union, and more VEGF and BMP-2 positivity, in comparison with bone defects treated with HA alone.

CONCLUSIONS

Combined application of HA and SV improves bone regeneration in mandibular critical bone defects compared with application of HA alone in healthy, diabetic, and osteoporotic rats.

CLINICAL RELEVANCE

This study might help to patients with osteoporosis or uncontrolled diabetes type 1, but future studies should be done.

The Design and In Vivo Testing of a Locally Stiffness-Matched Porous Scaffold

An increasing volume of work supports utilising the mechanobiology of bone for bone ingrowth into a porous scaffold. However, typically during in vivo testing of implants, the mechanical properties of the bone being replaced are not quantified. Consequently there remains inconsistencies in the literature regarding 'optimum' pore size and porosity for bone ingrowth. It is also difficult to compare ingrowth results between studies and to translate in vivo animal testing to human subjects without understanding the mechanical environment. This study presents a clinically applicable approach to determining local bone mechanical properties and design of a scaffold with similar properties. The performance of the scaffold was investigated in vivo in an ovine model. The density, modulus and strength of trabecular bone from the medial femoral condyle from ovine bones was characterised and power-law relationships were established. A porous titanium scaffold, intended to maintain bone mechanical homeostasis, was additively manufactured and implanted into the medial femoral condyle of 6 ewes. The stiffness of the scaffold varied throughout the heterogeneous structure and matched the stiffness variation of bone at the surgical site. Bone ingrowth into the scaffold was 10.73±2.97% after 6 weeks. Fine woven bone, in the interior of the scaffold, and intense formations of more developed woven bone overlaid with lamellar bone at the implant periphery were observed. The workflow presented will allow future in vivo testing to test specific bone strains on bone ingrowth in response to a scaffold and allow for better translation from in vivo testing to commercial implants.

Establishment and effects of allograft and synthetic bone graft substitute treatment of a critical size metaphyseal bone defect model in the sheep femur

Assessment of bone graft material efficacy is difficult in humans, since invasive methods like staged CT scans or biopsies are ethically unjustifiable. Therefore, we developed a novel large animal model for the verification of a potential transformation of synthetic bone graft substitutes into vital bone. The model combines multiple imaging methods with corresponding histology in standardized critical sized cancellous bone defect. Cylindrical bone voids (10 ml) were created in the medial femoral condyles of both hind legs (first surgery at right hind leg, second surgery 3 months later at left hind leg) in three merino‐wool sheep and either (i) left empty, filled with (ii) cancellous allograft bone or (iii) a synthetic, gentamicin eluting bone graft substitute. All samples were analysed with radiographs, MRI, μCT, DEXA and histology after sacrifice at 6 months. Unfilled defects only showed ingrowth of fibrous tissue, whereas good integration of the cancellous graft was seen in the allograft group. The bone graft substitute showed centripetal biodegradation and new trabecular bone formation in the periphery of the void as early as 3 months. μCT gave excellent insight into the structural changes within the defects, particularly progressive allograft incorporation and the bone graft substitute biodegradation process. MRI completed the picture by clearly visualizing soft tissue ingrowth into unfilled bone voids and presence of fluid collections. Histology was essential for verification of trabecular bone and osteoid formation. Conventional radiographs and DEXA could not differentiate details of the ongoing transformation process. This model appears well suited for detailed in vivo and ex vivo evaluation of bone graft substitute behaviour within large bone defects.

Nerve grafting for peripheral nerve injuries with extended defect sizes

Artificial and non-artificial nerve grafts are the gold standard in peripheral nerve reconstruction in cases with extensive loss of nerve tissue, particularly where a direct end-to-end suture or an autologous nerve graft is inauspicious. Different materials are marketed and approved by the US Food and Drug Administration (FDA) for peripheral nerve graft reconstruction. The most frequently used materials are collagen and poly(DL-lactide-ε-caprolactone). Only one human nerve allograft is listed for peripheral nerve reconstruction by the FDA. All marketed nerve grafts are able to demonstrate sufficient nerve regeneration over small distances not exceeding 3.0 cm. A key question in the field is whether nerve reconstruction on large defect lengths extending 4.0 cm or more is possible. This review gives a summary of current clinical and experimental approaches in peripheral nerve surgery using artificial and non-artificial nerve grafts in short and long distance nerve defects. Strategies to extend nerve graft lengths for long nerve defects, such as enhancing axonal regeneration, include the additional application of Schwann cells, mesenchymal stem cells or supporting co-factors like growth factors on defect sizes between 4.0 and 8.0 cm.

A novel in vivo large animal model of lumbar spinal joint degeneration

BACKGROUND CONTEXT

Degenerative disc disease (DDD) is a common, widespread socioeconomic problem. Appropriate large animal models of DDD are required for improved understanding and to serve as preclinical test beds for therapeutic strategies.

PURPOSE

To evaluate the effects of short and medium duration immobilization on the sheep lumbar intervertebral disc (IVD) and facet joints (FJs), and to establish a large animal model for DDD research.

STUDY DESIGN

An in vivo sheep model evaluating the effect of short- and medium-term immobilization on disc degeneration.

METHODS

Eighteen sheep were equally randomized into three groups: short-term (6-week) immobilization (n=6), medium-term (26-week) immobilization (n=6), and control (no surgery) (n=6). Immobilization of L3-L4 was achieved with pedicle screw and rod implantation, the IVD was kept intact, and the annulus and end plates were not disrupted. The IVD and FJs were assessed with planar radiography, computerized tomography (CT), magnetic resonance imaging (MRI), pure moment biomechanical testing, and histologic analysis.

RESULTS

Disc height was reduced for 6- and 26-week immobilization groups. The MRI and histologic analysis demonstrated significant disc degeneration for both immobilized groups compared with control, but no statistical difference was detected between short- and medium-term duration. Progressive degenerative changes in FJs were observed with micro-CT and histologic end points. Immobilization significantly reduced lateral bending and flexion-extension range of motion.

CONCLUSIONS

The mechanical environment set up by immobilization alone is capable of inducing lumbar disc degeneration at both 6 and 26 weeks in sheep. Longer duration immobilization did not advance disc degeneration process beyond of that found with short duration. The present model produces a degenerative disc with intact annulus and without acute injury, more closely representing the scenario common in human disc degeneration. This provides a suitable large animal in vivo model for the evaluation of the new therapies for disc degeneration. Further studies would do well to examine the effect of remobilization after immobilization in this model.

Animal models for bone tissue engineering and modelling disease

Tissue engineering and its clinical application, regenerative medicine, are instructing multiple approaches to aid in replacing bone loss after defects caused by trauma or cancer. In such cases, bone formation can be guided by engineered biodegradable and nonbiodegradable scaffolds with clearly defined architectural and mechanical properties informed by evidence-based research. With the ever-increasing expansion of bone tissue engineering and the pioneering research conducted to date, preclinical models are becoming a necessity to allow the engineered products to be translated to the clinic. In addition to creating smart bone scaffolds to mitigate bone loss, the field of tissue engineering and regenerative medicine is exploring methods to treat primary and secondary bone malignancies by creating models that mimic the clinical disease manifestation. This Review gives an overview of the preclinical testing in animal models used to evaluate bone regeneration concepts. Immunosuppressed rodent models have shown to be successful in mimicking bone malignancy via the implantation of human-derived cancer cells, whereas large animal models, including pigs, sheep and goats, are being used to provide an insight into bone formation and the effectiveness of scaffolds in induced tibial or femoral defects, providing clinically relevant similarity to human cases. Despite the recent progress, the successful translation of bone regeneration concepts from the bench to the bedside is rooted in the efforts of different research groups to standardise and validate the preclinical models for bone tissue engineering approaches.

Wool-derived keratin hydrogel enhances implant osseointegration in cancellous bone

AIM

This study investigated whether a keratin hydrogel derived from wool enhances ossointegration of dental implants, using a cancellous bone model in sheep.

METHOD

Ten female sheep received one dental implant per hind leg in the distal femoral condyles. Test implants were coated with 1 mL of keratin hydrogel containing sulphonated keratin and hydroxyapatite; control implants remained uncoated; implants were not functionally loaded axially. Biomechanical stability was tested with resonance frequency analysis (RFA) at placement and euthanasia. Animals were sacrificed after 4 weeks and resin-embedded histomorphometry performed.

FINDINGS

Bone appeared denser and more mature around the keratin-treated test implants. Average % bone-implant contact was significantly increased for the test (58.1 ± 4.6 [SD]%) compared to control implants (34.4 ± 7.5%) (p = 0.01). RFA values were lower for control (76.5 ± 4.2 ISQ) than test implants (80.4 ± 1.4) after 4 weeks (p = 0.04).

CONCLUSION

the increase in osseointegration found in this model suggests that keratin hydrogel has the potential to enhance the successful osseointegration of dental implants placed into poor quality bone. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2447-2454, 2018.

Histopathological comparison of bone healing effects of endonasal and percutaneous lateral osteotomy methods in rabbit rhinoplasty model

Introduction

Lateral osteotomy is mainly performed either endonasally or percutaneously in rhinoplasty which is a frequently performed operation for the correction of nasal deformities. Both techniques have both advantages and disadvantages relative to each other.

Objective

The aim of this study was to compare the histopathological effects of endonasal and percutaneous osteotomy techniques performed in rhinoplasty on bone healing and nasal stability in an experimental animal model.

Methods

Eight one year-old New Zealand white rabbits were included. Xylazine hydrocloride and intramuscular ketamine anesthesia were administered to the rabbits. Endonasal osteotomy (8 bones) was performed in Group 1 (n = 4), and percutaneous osteotomy (8 bones) in Group 2 (n = 4). One month later the rabbits were sacrificed. Bone healing of the rabbits was staged according to the bone healing score of Huddleston et al. In both groups, nasal bone integrity was assessed subjectively.

Results

In the percutaneous osteotomy group, Grade 1 bone healing was observed in two samples (25%), Grade 2 bone healing in two samples (25%), Grade 3 bone healing in four samples (50%). In the endonasal osteotomy group, Grade 1 bone healing was observed in 6 samples (75%) and Grade 2 bone healing was observed in 2 samples (25%). In the percutaneous group, fibrous tissue was observed in 2, predominantly fibrous tissue and a lesser amount of cartilage was observed in 2 and an equal amount of fibrous tissue and cartilage was observed in 4 samples. In the endonasal group, fibrous tissue was observed in 6 samples, and predominantly fibrous tissue with a lesser amount of cartilage was observed in 2 samples. In both groups, when manual force was applied to the nasal bones, subjectively the same resistance was observed.

Conclusion

Percutaneous lateral osteotomy technique was found to result in less bone and periost trauma and better bone healing compared to the endonasal osteotomy technique.

Management of traumatic bone defects: Metaphyseal versus diaphyseal defects

Although bone defects after trauma appear in different locations and forms, many clinicians have adopted a single strategy to deal with any defect. In this overview, a distinction is made between metaphyseal, or cancellous defects, and diaphyseal, or cortical defects. The treatment goals and background of these two types of defects are discussed in order to describe the difference in strategy and hence the difference in treatment method.

Critical Size Bone Defect Healing Using Collagen-Calcium Phosphate Bone Graft Materials

The need for bone graft materials to fill bony voids or gaps that are not related to the intrinsic stability of the bone that arise due to trauma, tumors or osteolysis remains a clinically relevant and significant issue. The in vivo response of collagen-tricalcium phosphate bone graft substitutes was evaluated in a critical size cancellous defect model in skeletally mature rabbits. While the materials were chemically virtually identical, new bone formation, implant resorption and local in vivo responses were significantly different. Differences in the in vivo response may be due, in part, collagen source and processing which influences resorption profiles. Continued improvements in processing and manufacturing techniques of collagen-tricalcium phosphate bone graft substitutes can result in osteoconductive materials that support healing of critical size bone defects even in challenging pre-clinical models.

Multiplex gene editing via CRISPR/Cas9 exhibits desirable muscle hypertrophy without detectable off-target effects in sheep

The CRISPR/Cas9 system provides a flexible approach for genome engineering of genetic loci. Here, we successfully achieved precise gene targeting in sheep by co-injecting one-cell-stage embryos with Cas9 mRNA and RNA guides targeting three genes (MSTN, ASIP, and BCO2). We carefully examined the sgRNAs:Cas9-mediated targeting effects in injected embryos, somatic tissues, as well as gonads via cloning and sequencing. The targeting efficiencies in these three genes were within the range of 27–33% in generated lambs, and that of simultaneously targeting the three genes was 5.6%, which demonstrated that micro-injection of zygotes is an efficient approach for generating gene-modified sheep. Interestingly, we observed that disruption of the MSTN gene resulted in the desired muscle hypertrophy that is characterized by enlarged myofibers, thereby providing the first detailed evidence supporting that gene modifications had occurred at both the genetic and morphological levels. In addition, prescreening for the off-target effect of sgRNAs was performed on fibroblasts before microinjection, to ensure that no detectable off-target mutations from founder animals existed. Our findings suggested that the CRISPR/Cas9 method can be exploited as a powerful tool for livestock improvement by simultaneously targeting multiple genes that are responsible for economically significant traits.

Overcoming translational challenges - The delivery of mechanical stimuli in vivo

Despite major medical advances, non-union bone fractures and skeletal defects continue to place significant burden on the patient, the clinicians and the healthcare system as a whole. Current bone substitute approaches are still limited in effectiveness and to date no adequate bone substitute material has been developed for routine clinical application. Tissue engineering presents a novel approach to tackling this clinical burden and developing an acceptable solution for the treatment of skeletal defects. Over the past three decades the field has evolved to appreciate the key biological, material and physical parameters influencing the development of a cell-based tissue engineered therapy and to create associated technologies to exploit such parameters. In recent years a number of therapies have started progressing along the pre-clinical pipeline to build a case for regulatory approval and ultimately clinical adoption. However, little emphasis has been given to the translational challenges faced when moving from "bench-to-bedside". One particular challenge lies in the delivery of functional mechanical stimuli to implanted cell populations to activate and promote osteogenic activities. This review introduces novel bio-magnetic approaches to overcoming this challenge.