The Challenge of 3D Bioprinting of Composite Natural Polymers PLA/Bioglass: Trends and Benefits in Cleft Palate Surgery

Achievements in 3D printing of silica-based materials for bone tissue engineering

Silica-based materials have been commonly studied in the field of bone tissue regeneration, due to their high bioactivity and osteogenic properties. There are two main strategies to obtain silica-based materials, a melt-quenching process using high temperatures, or a sol-gel reaction which can be carried out at mild conditions. Both techniques allow the preparation of calcium silicates and bioactive glasses, but pure silica can only be prepared through the sol-gel method. Furthermore, current clinical treatments require personalized scaffolds and these materials can be combined with the use of 3D printing techniques to obtain patient-specific scaffolds in a fast and precise fabrication process. This review focuses on the different silica-based 3D printable materials available nowadays as well as their physical, chemical and biological properties. Using high temperature, composites can be developed using Fused Deposition Modelling (FDM), while pure silica scaffolds can be prepared through Selective Laser Sintering (SLS) using silica particles. Moreover, silica particles can be 3D printed when combining polymeric binders and SLS, Stereolitography (SLA) or Direct Ink Writing (DIW); however, binder has to be removed at high temperatures after 3D printing. Alternatively, 3D printable silica materials can be obtained at mild temperatures through DIW or SLA, in this case only allowing the printing of composites or hybrids so far, with different proportions of silica. The properties of the resultant materials as well as the main advantages and disadvantages of the printing approaches are summarized in this review, together with the future perspectives in the field of silica 3D printed scaffolds.

On the Fused Deposition Modelling of Personalised Bio-Scaffolds: Materials, Design, and Manufacturing Aspects

Bone tissue engineering (BTE) is an important field of research, essential in order to heal bone defects or replace impaired tissues and organs. As one of the most used additive manufacturing processes, 3D printing can produce biostructures in the field of tissue engineering for bones, orthopaedic tissues, and organs. Scaffold manufacturing techniques and suitable materials with final structural, mechanical properties, and the biological response of the implanted biomaterials are an essential part of BTE. In fact, the scaffold is an essential component for tissue engineering where cells can attach, proliferate, and differentiate to develop functional tissue. Fused deposition modelling (FDM) is commonly employed in the 3D printing of tissue-engineering scaffolds. Scaffolds must have a good architecture, considering the porosity, permeability, degradation, and healing capabilities. In fact, the architecture of a scaffold is crucial, influencing not only the physical and mechanical properties but also the cellular behaviours of mesenchymal stem cells. Cells placed on/or within the scaffolds is a standard approach in tissue engineering. For bio-scaffolds, materials that are biocompatible and biodegradable, and can support cell growth are the ones chosen. These include polymers like polylactic acid (PLA), polycaprolactone (PCL), and certain bioglass or composite materials. This work comprehensively integrates aspects related to the optimisation of biocompatible and biodegradable composites with the low cost, simple, and stable FDM technology to successfully prepare the best designed composite porous bone-healing scaffolds. FDM can be used to produce low-cost bone scaffolds, with a suitable porosity and permeability.

Spectral Investigations of 60S Bioactive Glass Modified with La and Y Ions

The changes in the atomic structure and in the network of bonds between oxide tetrahedra in 60S bioactive glass upon modification of its structure by yttrium and lanthanum atoms were investigated via XPS, FTIR, and NMR spectroscopy methods. The presence of nanostructure in the samples of 60S bioactive glass modified with yttrium and lanthanum was demonstrated. The formation of a bioinert core of 60S bioactive glass nanoparticles with the subsequent formation of a biocompatible layer is facilitated by the redistribution of electron density when oxygen bridge bonds are broken, PO4 and SiO4 tetrahedra are fragmented in the polymer matrix, and isolated nanoclusters are formed. Given the fact that during the interaction with the extracellular matrix, the breakdown of covalent bonds -O-Si-O-P- is more energetically costly than the rapid ionic exchange of network modifiers Ca2+ (Y3+, La3+) and the leaching of isolated nanoclusters into the surrounding physiological environment, it is argued that modification of 60S bioactive glass with yttrium or lanthanum can accelerate bioactive ionic processes in the extracellular matrix.

Application of 3D Printing in Cleft Lip and Palate Repair

This manuscript reviews the transformative impact of 3-dimensional (3D) printing technologies in the treatment and management of cleft lip and palate (CLP), highlighting its application across presurgical planning, surgical training, implantable scaffolds, and postoperative care. By integrating patient-specific data through computer-aided design and manufacturing, 3D printing offers tailored solutions that improve surgical outcomes, reduce operation times, and enhance patient care. The review synthesizes current research findings, technical advancements, and clinical applications, illustrating the potential of 3D printing to revolutionize CLP treatment. Further, it discusses the future directions of combining 3D printing with other innovative technologies like artificial intelligence, 4D printing, and in situ bioprinting for more comprehensive care strategies. This paper underscores the necessity for multidisciplinary collaboration and further research to overcome existing challenges and fully utilize the capabilities of 3D printing in CLP repair.

[Translated article] Mechanical resistance of polylactic acid bone matrices developed by 3D printing for the reconstruction of bone defects

INTRODUCTION

Bone defects are one of the main limitations in orthopaedic surgery and traumatology. For this reason, multiple bone replacement systems have been developed, either by prosthetic implant or by substitution with osteoforming substances, whose limitations are their survival and lack of structurality, respectively. The objective of this work is the generation of a new material for the creation of biologically active structures that have sufficient tensile strength to maintain the structure during remodelling.

MATERIAL AND METHODS

A new filament based on the fusion of natural polylactide acid (PLA) powder was designed for the generation of pieces by means of fused deposition modelling (FDM) on which to carry out tensile mechanical tests of osteosynthesis material. A total of 13 groups with different cortical thickness, filling and layer height were carried out, with 10 tensile tests in each group, defining the tensile breaking limit for each group. The regression lines for each group and their mechanical resistance to traction on the filament used were determined.

RESULTS

The filament ratio per contact surface unit with the osteosynthesis used was the main determinant of the mechanical resistance to traction, either at the expense of the increase in cortical thickness or by the increase in the percentage of cancellous bone filling. Layer height had a minor effect on tensile strength. The regression value was high for cortical thickness and cancellous filling, being elements with a predictable biomechanical behaviour.

CONCLUSIONS

The new methodology allows the creation of personalised neutral and implantable PLA bone matrices for the reconstruction of large bone defects by means of 3D printing by FDM with a mechanical resistance to traction greater than that of current biological support structures.

Mechanical resistance of polylactic acid bone matrices developed by 3D printing for the reconstruction of bone defects

INTRODUCTION

Bone defects are one of the main limitations in orthopedic surgery and traumatology. For this reason, multiple bone replacement systems have been developed, either by prosthetic implant or by substitution with osteoforming substances, whose limitations are their survival and lack of structurality, respectively. The objective of this work is the generation of a new material for the creation of biologically active structures that have sufficient tensile strength to maintain the structure during remodeling.

MATERIAL AND METHODS

A new filament based on the fusion of natural polylactide acid (PLA) powder was designed for the generation of pieces by means of fused deposition modeling (FDM) on which to carry out tensile mechanical tests of osteosynthesis material. A total of 13 groups with different cortical thickness, filling and layer height were carried out, with 10 tensile tests in each group, defining the tensile breaking limit for each group. The regression lines for each group and their mechanical resistance to traction on the filament used were determined.

RESULTS

The filament ratio per contact surface unit with the osteosynthesis used was the main determinant of the mechanical resistance to traction, either at the expense of the increase in cortical thickness or by the increase in the percentage of cancellous bone filling. Layer height had a minor effect on tensile strength. The regression value was high for cortical thickness and cancellous filling, being elements with a predictable biomechanical behavior.

CONCLUSIONS

The new methodology allows the creation of personalized neutral and implantable PLA bone matrices for the reconstruction of large bone defects by means of 3D printing by FDM with a mechanical resistance to traction greater than that of current biological support structures.

Cone Beam-CT-Based Bone Volume Assessments of Alveolar Synthetic Bone Graft GlassBONE™ in Cleft Lip and Palate Patients: A Retrospective Study

Background

Clefts of the lip and palate (CLP) are facial deformities that require multiple surgical procedures during childhood. One of these steps consists of filling the alveolar space with bone graft, traditionally removed from the iliac crest. However, this procedure could be invasive in children.

Aim

Here, we aimed to evaluate the outcomes of GlassBONE™ graft, a bioactive glass used as a bone substitute, as an alternative to the deleterious autologous bone graft in children.

Materials & methods

Retrospective monocentric study with 17 children aged 7.5 ± 2.2 yo [3.8-13.3 yo] carrying CLP. This technique has been established at La Timone Children hospital (Assistance Publique - Hôpitaux de Marseille) since 2011. Clinical (scar, graft rejection and periodontal status) and radiological (both panoramic radiographs and cone beam-CT) follow-up was conducted one year after the graft. The primary outcome was the reduction of the cleft volume, and secondary was the eruption of the adjacent tooth through the graft.

Results

GlassBONE™ permitted a significant reduction in the cleft volume by 42.4 ± 27.7% [0.6-81.1%] (p < 0.0001), corresponding to a filling of 57.6 ± 27.7% of the alveolar cleft. GlassBONE™ is well tolerated, ensuring satifactory clinical results (improvement in both scar and periodontal coverage), as well as the physiological evolution of the germs through the biomaterial. GlassBONE™ appears particularly suitable for small volumes, and we were able to determine a minimum volume of approximtely 0.259 + / - 0.155 cc required for a successful bone fusion.

Conclusion

The bioactive glass GlassBONE™ could be safely used in children with small CLP cases, providing satisfactory clinical and radiological results.

Advancements of 3D bioprinting in regenerative medicine: Exploring cell sources for organ fabrication

3D bioprinting has unlocked new possibilities for generating complex and functional tissues and organs. However, one of the greatest challenges lies in selecting the appropriate seed cells for constructing fully functional 3D artificial organs. Currently, there are no cell sources available that can fulfill all requirements of 3D bioprinting technologies, and each cell source possesses unique characteristics suitable for specific applications. In this review, we explore the impact of different 3D bioprinting technologies and bioink materials on seed cells, providing a comprehensive overview of the current landscape of cell sources that have been used or hold potential in 3D bioprinting. We also summarized key points to guide the selection of seed cells for 3D bioprinting. Moreover, we offer insights into the prospects of seed cell sources in 3D bioprinted organs, highlighting their potential to revolutionize the fields of tissue engineering and regenerative medicine.

Bioglass 45S5, a relevant alternative to autogenous harvesting for secondary alveolar bone grafts in clefts? Retrospective study of one hundred surgeries

The secondary alveolar bone grafting (SABG) step restores the continuity of the alveolar bone necessary for dentition. Faced with the complications of autografts, synthetic biomaterials such as Bioglass (BG) 45S5 have been proposed. The objective was to evaluate the success rate of SABG with the addition of BG 45S5 and to highlight the prognostic factors. Patients who underwent operation between 2015 and 2021 and had follow-up cone-beam computed tomography (CBCT) were analyzed. Multivariate analysis was performed to determine factors influencing radiographic success. A total of 102 SABG were analyzed. They were unilateral total cleft lip and palate (49, 48.0%). The mean age at surgery was 9.32 ± 3.09 years. Surgeries were performed mainly outside a syndromic context and without a family history after orthodontic preparation. The radiographic success rate at 1 year was 80.4%. Mixed dentition stage (odds ratio [OR] = 7.3, p = 0.024), absence of syndromic context (OR = 20.7, p = 0.024) and female sex (OR = 4.88, p = 0.021) were factors predictive of surgical success. The use of BG 45S5 instead of autograft is relevant for SABG, with a 1-year success rate of over 80%. The stage of mixed dentition, the absence of syndromic context, and female sex were factors for good prognosis.

Biocompatible antibiotic-loaded mesoporous silica/bioglass/collagen-based scaffolds as bone drug delivery systems

Local delivery of antibiotics has gained increasing interest in the treatment of osteomyelitis due to its effectiveness and safety. Since the regeneration of bone tissue at the site of infection is as important as bacterial eradication, implantable drug delivery systems should not only release the drugs in a proper manner but also exert the osseointegration capability. Herein, we present an implantable drug delivery system in a scaffold form with a unique set of features for local treatment of osteomyelitis. For the first time, collagen type I, ciprofloxacin-loaded mesoporous silica, and bioglass were combined to obtain scaffolds using the molding method. Drug-loaded mesoporous silica was blended with polydimethylsiloxane to prolong the drug release, whereas bioglass served as a remineralization agent. Collagen-silica scaffolds were evaluated in terms of physicochemical properties, drug release rate, mineralization potential, osteoblast response in vitro, antimicrobial activity, and biological properties using an in vivo preclinical model - chick embryo chorioallantoic membrane (CAM). The desirable multifunctionality of the proposed collagen-silica scaffolds was confirmed. They released the ciprofloxacin for 80 days, prevented biofilm development, and induced hydroxyapatite formation. Moreover, the resulting macroporous structure of the scaffolds promoted osteoblast attachment, infiltration, and proliferation. Collagen-silica scaffolds were also biocompatible and effectively integrated with CAM.

Treatment of critical bone defects using calcium phosphate cement and mesoporous bioactive glass providing spatiotemporal drug delivery

Calcium phosphate cements (CPC) are currently widely used bone replacement materials with excellent bioactivity, but have considerable disadvantages like slow degradation. For critical-sized defects, however, an improved degradation is essential to match the tissue regeneration, especially in younger patients who are still growing. We demonstrate that a combination of CPC with mesoporous bioactive glass (MBG) particles led to an enhanced degradation in vitro and in a critical alveolar cleft defect in rats. Additionally, to support new bone formation the MBG was functionalized with hypoxia conditioned medium (HCM) derived from rat bone marrow stromal cells. HCM-functionalized scaffolds showed an improved cell proliferation and the highest formation of new bone volume. This highly flexible material system together with the drug delivery capacity is adaptable to patient specific needs and has great potential for clinical translation.

Bone Graft Substitutes and Enhancement in Craniomaxillofacial Surgery

Critical-sized bone defects are a reconstructive challenge, particularly in the craniomaxillofacial (CMF) skeleton. The "gold standard" of autologous bone grafting has been the work horse of reconstruction in both congenital and acquired defects of CMF skeleton. Autologous bone has the proper balance of the protein (or organic) matrix and mineral components with no immune response. Organic and mineral adjuncts exist that offer varying degrees of osteogenic, osteoconductive, osteoinductive, and osteostimulative properties needed for treatment of critical-sized defects. In this review, we discuss the various mostly organic and mostly mineral bone graft substitutes available for autologous bone grafting. Primarily organic bone graft substitutes/enhancers, including bone morphogenic protein, platelet-rich plasma, and other growth factors, have been utilized to support de novo bone growth in setting of critical-sized bone defects. Primarily mineral options, including various calcium salt formulation (calcium sulfate/phosphate/apatite) and bioactive glasses have been long utilized for their similar composition to bone. Yet, a bone graft substitute that can supplant autologous bone grafting is still elusive. However, case-specific utilization of bone graft substitutes offers a wider array of reconstructive options.

[Digital technology and children's maxillofacial management]

The maxillofacial region has multiple functions such as breathing, language, and facial expressions. Children's maxillofacial development is a complex and long process, which is affected by many factors such as genetics, diseases, bad habits and trauma. Early detection, early diagnosis, and early treatment are important concepts in children's maxillofacial management. Digital technology medicine is an emerging technology based on medical imaging and anatomy that has emerged in recent years. The application of this technology in the field of clinical medicine will undoubtedly bring great benefits to children's maxillofacial management. This article summarizes the research on digital technology in children's maxillofacial management, and focuses on the research on children's malocclusion, children's OSA, cleft lip and palate and other related diseases.

Bioactive glass for periodontal regeneration: a systematic review

BACKGROUND

One of the major clinical challenges of this age could be represented by the possibility to obtain a complete regeneration of infrabony defects. Over the past few years, numerous materials and different approaches have been developed to obtain bone and periodontal healing. Among all biomaterials, bioglasses (BG) are one of the most interesting due to their ability to form a highly reactive carbonate hydroxyapatite layer. Our aim was to systematically review the literature on the use and capability of BG for the treatment of periodontal defects and to perform a meta-analysis of their efficacy.

METHODS

A search of MEDLINE/PubMed, Cochrane Library, Embase and DOSS was conducted in March 2021 to identify randomized controlled trials (RCTs) using BG in the treatment of intrabony and furcation defects. Two reviewers selected the articles included in the study considering the inclusion criteria. The outcomes of interest were periodontal and bone regeneration in terms of decrease of probing depth (PD) and gain of clinical attachment level (CAL). A network meta-analysis (NMA) was fitted, according to the graph theory methodology, using a random effect model.

RESULTS

Through the digital search, 46 citations were identified. After duplicate removal and screening process, 20 articles were included. All RCTs were retrieved and rated following the Risk of bias 2 scale, revealing several potential sources of bias. The meta-analysis focused on the evaluation at 6 months, with 12 eligible articles for PD and 10 for CAL. As regards the PD at 6 months, AUTOGENOUS CORTICAL BONE, BIOGLASS and PLATELET RICH FIBRIN were more efficacious than open flap debridement alone, with a statistically significant standardized mean difference (SMD) equal to -1.57, -1.06 and - 2.89, respectively. As to CAL at 6 months, the effect of BIOGLASS is reduced and no longer significant (SMD = -0.19, p-value = 0.4) and curiously PLATELET RICH FIBRIN was more efficacious than OFD (SMD =-4.13, p-value < 0.001) in CAL gain, but in indirect evidence.

CONCLUSIONS

The present review partially supports the clinical efficacy of BG in periodontal regeneration treatments for periodontal purposes. Indeed, the SMD of 0.5 to 1 in PD and CAL obtained with BG compared to OFD alone seem clinically insignificant even if it is statistically significant. Heterogeneity sources related to periodontal surgery are multiple, difficult to assess and likely hamper a quantitative assessment of BG efficacy.

Recent Advances in Decellularized Matrix-Derived Materials for Bioink and 3D Bioprinting

As an emerging 3D printing technology, 3D bioprinting has shown great potential in tissue engineering and regenerative medicine. Decellularized extracellular matrices (dECM) have recently made significant research strides and have been used to create unique tissue-specific bioink that can mimic biomimetic microenvironments. Combining dECMs with 3D bioprinting may provide a new strategy to prepare biomimetic hydrogels for bioinks and hold the potential to construct tissue analogs in vitro, similar to native tissues. Currently, the dECM has been proven to be one of the fastest growing bioactive printing materials and plays an essential role in cell-based 3D bioprinting. This review introduces the methods of preparing and identifying dECMs and the characteristic requirements of bioink for use in 3D bioprinting. The most recent advances in dECM-derived bioactive printing materials are then thoroughly reviewed by examining their application in the bioprinting of different tissues, such as bone, cartilage, muscle, the heart, the nervous system, and other tissues. Finally, the potential of bioactive printing materials generated from dECM is discussed.

Current Concepts and Challenges in the Treatment of Cleft Lip and Palate Patients-A Comprehensive Review

Cleft lip and cleft palate has one of the highest incidences in the malformations of the oral cavity, that varies between populations. The background underlying the issue of cleft lip and palate is multifactorial and greatly depends on the genetic factors and environmental factors. The aim of this nonsystematic narrative review is to present the cleft palate and or lip pediatric population as target for interdisciplinary treatment. The purpose of this narrative review is to sum up the modern knowledge on the treatment of patients with clefts, as well as to highlight the importance of the great need for cooperation between different dental specialists along with medical professionals such as oral surgeons, prosthodontists, orthodontists along with medical professions such as pediatricians, speech therapists and phoniatrics, and laryngologist.

A Narrative Review of Bioactive Glass-Loaded Dental Resin Composites

This review aims to provide a comprehensive analysis of the characterizations of bioactive glass (BAG)-loaded dental resin-based composite materials. Online databases (Web of Science, PubMed, and Science Direct) were used to collect data published from January 2011 to January 2022. Only BAG-containing resin adhesive and resin restorative composites are discussed in this narrative review. BAG-loaded resin composites exhibit excellent mineralization ability reflecting enhanced ion release, pH elevation, and apatite formation, especially regarding high BAG loading. This aids the anti-demineralization and remineralization of teeth. Furthermore, BAG-loaded resin composites demonstrated in vitro biocompatibility and antibacterial performance. It has been suggested that BAG fillers with small particle sizes and no more than 20 wt% in terms of loading amount should be used to guarantee the appropriate mechanical properties of resin composites. However, most of these studies focused on one or some aspects using different resin systems, BAG types, and BAG amounts. As such, this makes the comparison difficult, and it is essential to find an optimal balance between different properties. BAG-loaded resin composites can be regarded as bioactive materials, which present major benefits in dentistry, especially their capability in the bacterial inhibition, cell biocompatibility, anti-demineralization, and remineralization of teeth.