Development and Characterization of Novel Active Chitosan Films Containing Fennel and Peppermint Essential Oils

pH-responsive cross-linked chitin nanofiber-reinforced chitosan films with red cabbage anthocyanins for intelligent food packaging: Properties, freshness monitoring, and stability

Developing food packaging that provides real-time information on food freshness and safety is crucial for reducing food waste caused by spoilage. Herein, we successfully developed pH-responsive films using chitosan, chitin nanofibers (ChNFs), and red cabbage anthocyanins, cross-linked with citric acid (CA). The effects of CA concentrations on the films' properties were evaluated. The successful cross-linking was confirmed by the presence of a Fourier-transform infrared peak at 1720 cm-1 and increased gel content, which considerably enhanced the properties of the films. Notably, the films cross-linked with 10 parts per hundred (phr) of CA showed remarkable improvements compared with uncross-linked films, including a 52.8 % increase in tensile strength, a 24.9 % increase in Young's modulus, a 38.2 % decrease in water absorption, and a 23.1 % decrease in water vapor permeability. However, excessive amounts of CA negatively affected the films' performance. Additionally, these films exhibited distinct color changes when exposed to various pH solutions or NH3 gas, enabling effective monitoring of shrimp freshness. Importantly, encapsulation through cross-linking effectively limited anthocyanin leaching, enhancing the films' stability and reusability, after five acidic-alkaline testing cycles. Consequently, these cross-linked films with red cabbage anthocyanins offer a promising solution for intelligent packaging applications, enabling real-time monitoring of meat freshness.

Ecologically sustainable biodegradable polymers fabricated from banana peel pectin reinforced with silver zeolite nanoparticles (Ag/zeolite NPs)

In the present investigation, the formulation and thorough assessment of biodegradable composite films were conducted, utilizing pectin extracted from banana peel in conjunction with synthesized silver zeolite nanoparticles. The evaluation of physical properties, microstructural investigation, mechanical characteristics, and barrier properties was done providing valuable insights into various attributes of the film. The amalgamation of silver zeolite nanoparticles with the extracted pectin from banana peel results in biodegradable composite films exhibiting distinct physical, mechanical, barrier, and thermal properties. Optimal mechanical characteristics were recorded in films containing 0.75 % Ag-ZY, demonstrating a tensile strength of 43.22 ± 0.12 MPa and a Young's modulus of 829.61 ± 0.71 MPa, while the elongation at break exhibited a decline as the filler concentration escalated. The barrier properties were enhanced with the integration of Ag-ZY. At a concentration of 0.75 % Ag-ZY, the water vapor transmission rate (WVTR) and water vapor permeability (WVP) reached their lowest measurements. The thermal stability increased, with the glass transition temperature (Tg) increasing from 70.31 °C in the baseline film to 135.53 °C when 0.75 % Ag-ZY was added. These results elucidate that the incorporation of 0.75 % silver zeolite nanoparticles into banana peel pectin films significantly improved mechanical, barrier, and thermal properties.

The physicochemical, mechanical, and antifungal properties of sodium alginate film containing Japanese rice vinegar and peppermint (Mentha piperita) oil as bio-composite packaging

Sodium Alginate has a high demand and is favored for food packaging; however, this film typically exhibits poor antimicrobial activity. In this study, sodium alginate film containing peppermint essential oil, Japanese rice vinegar, or a combination of both, is used to analyze antimicrobial, mechanical, structural, and optical properties. The scanning electron microscopy (SEM) technique is utilized to observe the film's surface and cross-section homogeneity. The addition of peppermint essential oil and Japanese rice vinegar to the alginate film solution improves fungal growth and spore germination prevention. Unlike the film containing vinegar, the film with peppermint essential oil shows the lowest transparency. It also has the lowest tensile strength and exhibits the highest elongation at break and water vapor permeability. Conclusively, the film containing a combination of vinegar and essential oil indicates moderate values. According to AFM topography, the film with a mix of essential oil and vinegar has a smoother, more homogeneous surface than other films. Our results prove that combining vinegar and oil with sodium alginate film is an ideal choice. This combination significantly improves the performance of food packaging.

Examining the potential of peppermint essential oil-infused pectin and kappa-carrageenan composite films for sustainable food packaging

Essential oils are key ingredients in the development of edible films and provide a diverse approach to improving food preservation, as well as sensory qualities. The pectin and kappa-carrageenan composite films were obtained by adding peppermint essential oil in different quantities. The films after their fabrication were thoroughly evaluated for their attributes, which included mechanical, barrier, optical, chemical, thermal, and antioxidant properties. The visual assessment of the films demonstrated that PEO-loaded films showed a uniform, homogenous, and slightly yellowish appearance. There was an increase in the thickness (0.045 ± 0.006 to 0.060 ± 0.008 mm), elongation at break (12.73 ± 0.74 to 25.05 ± 1.33 %), and water vapor permeability (0.447 ± 0.014 to 0.643 ± 0.014 (g*mm)/(m2*h*kPa)) was observed with the addition of PEO. However, tensile strength (45.84 ± 3.69 to 29.80 ± 2.10 MPa) and moisture content (25.83 ± 0.046 to 21.82 ± 0.23 %) decreased with the incorporation of PEO. Furthermore, thermal and antioxidant properties were enhanced by the inclusion of PEO. The presented investigation can be employed to synthesize food packaging material with antioxidant properties with potential applications in food packaging.

Bioinspired chitosan based functionalization of biomedical implant surfaces for enhanced hemocompatibility, antioxidation and anticoagulation potential: an in silico and in vitro study

Endowing implanted biomaterials with better hemocompatibility, anticoagulation, antioxidant and antiplatelet adhesion is necessary because of their potential to trigger activation of multiple reactive mechanisms including coagulation cascade and potentially causing serious adverse clinical events like late thrombosis. Active ingredients from natural sources including Foeniculum vulgare, Angelica sinensis, and Cinnamomum verum have the ability to inhibit the coagulation cascade and thrombus formation around biomedical implants. These properties are of interest for the development of a novel drug for biomedical implants to potentially solve the current blood clotting and coagulation problems which lead to stent thrombosis. The objective of this study was to incorporate different anticoagulants from natural sources into a degradable matrix of chitosan with varying concentrations ranging from 5% to 15% and a composite containing all three drugs. The presence of anticoagulant constituents was identified using GC-MS. Subsequently, all the compositions were characterized principally by using Fourier transform infrared spectroscopy and scanning electron microscopy while the drug release profile was determined using UV-spectrometry for a 30 days immersion period. The results indicated an initial burst release which was subsequently followed by the sustained release pattern. Compared to heparin loaded chitosan, DPPH and hemolysis tests revealed better blood compatibility of natural drug loaded films. Moreover, the anticoagulation activity of natural drugs was equivalent to the heparin loaded film; however, through docking, the mechanism of inhibition of the coagulation cascade of the novel drug was found to be through blocking the extrinsic pathway. The study suggested that the proposed drug composite expresses an optimum composition which may be a practicable and appropriate candidate for biomedical implant coatings.

Novel chitosan-based smart bio-nanocomposite films incorporating TiO2 nanoparticles for white bread preservation

Chitosan (CS)-based bio-nanocomposite food packaging films were prepared via solvent-casting method by incorporating a unique combination of additives and fillers, including polyvinyl alcohol (PVA), glycerol, Tween 80, castor oil (CO), and nano titanium dioxide (TiO2) in various proportions to enhance film properties. For a comprehensive analysis of the synthesized films, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), tensile testing, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), and UV-vis spectrophotometry were employed. Furthermore, the antimicrobial efficacy of the films against S. aureus, E. coli, and A. niger was examined to assess their potential to preserve food from foodborne pathogens. The results claimed that the inclusion of castor oil and TiO2 nanoparticles considerably improved antimicrobial properties, UV-vis light barrier properties, thermal stability, optical transparency, and mechanical strength of the films, while reducing their water solubility, moisture content, water vapor and oxygen permeability. Based on the overall analysis, CS/PVA/CO/TiO2-0.3 film can be selected as the optimal one for practical applications. Furthermore, the practical application of the optimum film was evaluated using white bread as a model food product. The modified film successfully extended the shelf life of bread to 10 days, surpassing the performance of commercial LDPE packaging (6 days), and showed promising attributes for applications in the food packaging sector. These films exhibit superior antimicrobial properties, improved mechanical strength, and extended shelf life for food products, marking a sustainable and efficient alternative to conventional plastic packaging in both scientific research and industrial applications.

Pressurized liquid extraction of bioactive compounds from grape peel and application in pH-sensing carboxymethyl cellulose films: A promising material to monitor the freshness of pork and milk

This study produced pH-sensing carboxymethyl cellulose (CMC) films functionalized with bioactive compounds obtained by pressurized liquid extraction (PLE) of grape peel to monitor the freshness of pork and milk. A semi-continuous PLE was conducted using hydroethanolic solution (70:30, v/v) at a flow rate of 5 mL/min, 15 MPa, and 60 °C. The films were produced by the casting technique using CMC (2.5 %, w/v), glycerol (1 %, v/v), and functionalized with 10, 30, and 50 % (v/v) grape peel extract. From the results obtained, LC-MS/MS revealed that PLE extracted twenty-seven phenolic compounds. The main phenolic compounds were kaempferol-3-glucoside (367.23 ± 25.88 µg/mL), prunin (270.23 ± 3.62 µg/mL), p-coumaric acid (236.43 ± 26.02 µg/mL), and procyanidin B1 (117.17 ± 7.29 µg/mL). The CMC films presented suitable color and mechanical properties for food packaging applications. The addition of grape peel extract promoted the pH-sensing property, showing the sensitivity of anthocyanins to pH changes. The films functionalized with grape peel extract presented good release control of bioactive compounds, making them suitable for food packaging applications. When applied to monitor the freshness of pork and milk, the films exhibited remarkable color changes associated with the pH of the food during storage. In conclusion, PLE is a sustainable approach to obtaining bioactive compounds from the grape peel, which can be applied in the formulation of pH-sensing films as a promising sustainable material to monitor food freshness during storage.

Cellulose nanocrystals reinforced chitosan/titanium dioxide bionanocomposite with enhanced interfacial compatibility: Fabrication, characterization, and application in fresh-cut apple slices

This research aimed to investigate the feasibility of using a bionanocomposite made of chitosan, CNC, and TiO2 nanoparticles to package freshly sliced apples. At the outset, the effect of varying concentrations of CNC (1, 5, and 10 %) and TiO2 (1, 3, and 5 %) on the mechanical, thermal, and water sensitivity characteristics of the chitosan bionanocomposite was studied. Among different combinations, the bionanocomposite containing 10 % CNC and 3 % TiO2 displayed significant enhancements compared to neat chitosan film. Notably, it exhibited a substantial increase in tensile strength (78.2 %), glass transition temperature (26.7 %), and melting temperature (30.0 %) compared to neat chitosan film. Additionally, it demonstrated reduced WVP (27.8 %), FWS (44.4 %), and SR (50.7 %). These improvements were attributed to the synergistic interactions among chitosan, CNC, and TiO2 nanoparticles through hydrogen and oxygen bonding, corroborated by spectral changes in the material. The photocatalytic degradation of ethylene and microbes by UV-A (intermittent) activated TiO2 contained in the developed bionanocomposite was confirmed by the retention of acceptable quality and radical scavenging activity (70 % retention) of fresh-cut apple slices up to 11 days. The developed bionanocomposite can thus preserve the quality of ethylene-producing horticultural produce.

Recent advances in chitosan-based materials; The synthesis, modifications and biomedical applications

The attention to polymer-based biomaterials, for instance, chitosan and its derivatives, as well as the techniques for using them in numerous scientific domains, is continuously rising. Chitosan is a decomposable naturally occurring polymeric material that is mostly obtained from seafood waste. Because of its special ecofriendly, biocompatible, non- toxic nature as well as antimicrobial properties, chitosan-based materials have received a lot of interest in the field of biomedical applications. The reactivity of chitosan is mainly because of the amino and hydroxyl groups in its composition, which makes it further fascinating for various uses, including biosensing, textile finishing, antimicrobial wound dressing, tissue engineering, bioimaging, gene, DNA and drug delivery and as a coating material for medical implants. This study is an overview of the different types of chitosan-based materials which now a days have been fabricated by applying different techniques and modifications that include etherification, esterification, crosslinking, graft copolymerization and o-acetylation etc. for hydroxyl groups' processes and acetylation, quaternization, Schiff's base reaction, and grafting for amino groups' reactions. Furthermore, this overview summarizes the literature from recent years related to the important applications of chitosan-based materials (i.e., thin films, nanocomposites or nanoparticles, sponges and hydrogels) in different biomedical applications.

Design and characterization of chitosan-based films incorporated with summer savory (Satureja hortensis L.) essential oil for active packaging

In this study, biodegradable films were fabricated by using cross-linked chitosan nanoparticles containing different concentrations (0, 1.0, 1.2, 1.4, and 1.5 %, v/v) of Satureja hortensis essential oil (SHEO) and their physicochemical, mechanical, antimicrobial, morphological, structural and antioxidant properties were analyzed. SHEO incorporation improved antibacterial, antioxidant and thermal properties of the films. Four studied bacteria were efficiently inhibited by films loaded with SHEO. According to the FE-SEM analysis, control film had nano-sized pores while micron sized particles were present in SHEO incorporated films. Increase in color difference was well correlated with SHEO concentration. The addition of SHEO decreased elongation at break (EB) and caused an irregular fluctuation in the tensile strength (TS) values. Increase in essential oil concentration resulted in lower water solubility. The FTIR spectra of films showed evidence of interactions and molecular arrangements when SHEO was added to the polymer matrix. Overall, the findings demonstrated that SHEO incorporated chitosan-based films were successfully prepared by cross linking and film properties were remarkably affected from SHEO concentration.

Development of water-resistant paper using chitosan and plant-based wax extracted from banana leaves

On being exposed to water, cellulose paper swells and its mechanical properties become weak. In this study, natural wax with an average particle size of 12.3 μm extracted from banana leaves was mixed with chitosan to prepare coatings applied on paper surfaces. Chitosan efficiently dispersed banana leaf-extracted wax on paper surfaces. The mixed chitosan and wax coatings considerably influenced paper properties, including yellowness, whiteness, thickness, wettability, water and oil sorption, and mechanical properties. The coating induced hydrophobicity in the paper, resulting in a significant increase in the water contact angle from 65.1 ± 7.7° (uncoated paper) to 123.2 ± 2.1°, and a decrease in water absorption by ⁓64 % to 52.6 ± 1.9 %. The coated paper demonstrated an oil sorption capacity of 212.2 ± 2.8 %, which was ⁓43 % greater than that of the uncoated paper, and the tensile strength of the coated paper improved by 43 % under wet conditions compared to the uncoated paper. Additionally, a separation of oil in water was observed for the chitosan/wax coated paper. Based on these promising results, the paper coated with chitosan and wax could be used for direct-contact packaging applications.

The Effect of Sage (Salvia sclarea) Essential Oil on the Physiochemical and Antioxidant Properties of Sodium Alginate and Casein-Based Composite Edible Films

The aim of this study was to examine the effect of Sage (Salvia sclarea) essential oil (SEO) on the physiochemical and antioxidant properties of sodium alginate (SA) and casein (CA) based films. Thermal, mechanical, optical, structural, chemical, crystalline, and barrier properties were examined using TGA, texture analyzer, colorimeter, SEM, FTIR, and XRD. Chemical compounds of the SEO were identified via GC–MS, the most important of which were linalyl acetate (43.32%) and linalool (28.51%). The results showed that incorporating SEO caused a significant decrease in tensile strength (1.022–0.140 Mpa), elongation at break (28.2–14.6%), moisture content (25.04–14.7%) and transparency (86.1–56.2%); however, WVP (0.427–0.667 × 10−12 g·cm/cm2·s·Pa) increased. SEM analysis showed that the incorporation of SEO increased the homogeneousness of films. TGA analysis showed that SEO-loaded films showed better thermal stability than others. FTIR analysis revealed the compatibility between the components of the films. Furthermore, increasing the concentration of SEO increased the antioxidant activity of the films. Thus, the present film shows a potential application in the food packaging industry.

The use of essential oils in chitosan or cellulose-based materials for the production of active food packaging solutions: a review

In recent decades, interest in sustainable food packaging systems with additional functionality, able to increase the shelf life of products, has grown steadily. Following this trend, the present review analyzes the state of the art of this active renewable packaging. The focus is on antimicrobial systems containing nanocellulose and chitosan, as support for the incorporation of essential oils. These are the most sustainable and readily available options to produce completely natural active packaging materials. After a brief overview of the different active packaging technologies, the main features of nanocellulose, chitosan, and of the different essential oils used in the field of active packaging are introduced and described. The latest findings about the nanocellulose- and chitosan-based active packaging are then presented. The antimicrobial effectiveness of the different solutions is discussed, focusing on their effect on other material properties. The effect of the different inclusion strategies is also reviewed considering both in vivo and in vitro studies, in an attempt to understand more promising solutions and possible pathways for further development. In general, essential oils are very successful in exerting antimicrobial effects against the most diffused gram-positive and gram-negative bacteria, and affecting other material properties (tensile strength, water vapor transmission rate) positively. Due to the wide variety of biopolymer matrices and essential oils available, it is difficult to create general guidelines for the development of active packaging systems. However, more attention should be dedicated to sensory analysis, release kinetics, and synergetic action of different essential oils to optimize the active packaging on different food products. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Chitosan coating for the preparation of multilayer coated paper for food-contact packaging: Wettability, mechanical properties, and overall migration

Cellulose-based paper is an alternative substitution for petroleum-based polymers for packaging applications, but its mechanical performance is poor when in contact with water. Herein, chitosan was applied on cellulose-based paper via a coating approach. The effects of chitosan coatings between none and five layers on the color properties, wettability, thermal properties, mechanical performance, and overall migration in food simulants of the paper were evaluated. After the application of chitosan, chitosan first filled cavities between cellulose fibers within a network, and the chitosan film was formed on the paper surface later. This resulted in a pronounced increase in wettability and mechanical properties associated with a loss of whiteness and an increase in yellowness of the coated paper. The chitosan-coated paper became hydrophobic with a water contact angle of 94.7 ± 2.8°, and a robust improvement of 156.4% for tensile strength and 114.8% for strain at break was observed for the paper coated with three layers of chitosan in wet conditions in comparison to the uncoated paper. A reduction in the migration of the low molecular residuals from the paper could be hindered by the chitosan coating. These enhanced features revealed that chitosan-coated paper could be used as a food-contact material.

Production of chitosan-based biodegradable active films using bio-waste enriched with polyphenol propolis extract envisaging food packaging applications

Developing biodegradable active films has been a promising green approach to overcoming global concerns over the environmental pollution and human health caused by plastic utilization. This study aimed to develop active films based on chitosan (CS), produced from waste crayfish (Procambarus clarkii) shells enriched with bioactive extract (5-20%) of propolis (PS) and to characterize its properties, envisaging food packaging applications. The chromatographic profile of PS extract confirmed its richness, with 41 phenolic compounds. With increasing extract addition to the chitosan, the thickness of the films increased from 61.7 to 71.7 μm, causing a reduction in the light transmission rate, along with a greenish colour shift. The interactions between PS extract and CS was confirmed by infrared spectroscopy, at the same time that the microstructural integrity of the films was checked on the scanning electron microscopy micrographs. The findings also showed that addition of PS enhanced the films thermal stability and mechanical properties e.g., tensile modulus, yield strength, and stress at break. Besides, it improved the antioxidant and antimicrobial activities. Overall, CS-based composite films seem a promising green alternative to petroleum-based synthetic plastics allowing to extend the shelf life of food products due to their eco-friendly nature.

Current Trends in the Utilization of Essential Oils for Polysaccharide- and Protein-Derived Food Packaging Materials

Essential oils (EOs) have received attention in the food industry for developing biopolymer-derived food packaging materials. EOs are an excellent choice to replace petroleum-derived additives in food packaging materials due to their abundance in nature, eco-friendliness, and superior antimicrobial and antioxidant attributes. Thus far, EOs have been used in cellulose-, starch-, chitosan-, and protein-based food packaging materials. Biopolymer-based materials have lower antioxidant and antibacterial properties in comparison with their counterparts, and are not suitable for food packaging applications. Various synthetic-based compounds are being used to improve the antimicrobial and antioxidant properties of biopolymers. However, natural essential oils are sustainable and non-harmful alternatives to synthetic antimicrobial and antioxidant agents for use in biopolymer-derived food packaging materials. The incorporation of EOs into the polymeric matrix affects their physicochemical properties, particularly improving their antimicrobial and antioxidant properties. EOs in the food packaging materials increase the shelf life of the packaged food, inhibit the growth of microorganisms, and provide protection against oxidation. Essential oils also influence other properties, such as tensile, barrier, and optical properties of the biopolymers. This review article gives a detailed overview of the use of EOs in biopolymer-derived food packaging materials. The innovative ways of incorporating of EOs into food packaging materials are also highlighted, and future perspectives are discussed.

Recent developments in polysaccharide-based electrospun nanofibers for environmental applications

Electrospinning has become an inevitable approach to produce nanofibrous structures for diverse environmental applications. Polysaccharides, due to their variety of types, biobased origins, and eco-friendly, and renewable nature are wonderful materials for the said purpose. The present review discusses the electrospinning process, the parameters involved in the formation of electrospun nanofibers in general, and the polysaccharides in specific. The selection of materials to be electrospun depends on the processing conditions and properties deemed desirable for specific applications. Thereby, the conditions to electrospun polysaccharides-based nanofibers have been focused on for possible environmental applications including air filtration, water treatment, antimicrobial treatment, environmental sensing, and so forth. The polysaccharide-based electrospun membranes, for instance, due to their active adsorption sites could find significant potential for contaminants removal from the aqueous systems. The study also gives some recommendations to overcome any shortcomings faced during the electrospinning and environmental applications of polysaccharide-based matrices.

Effects of Peppermint Extract and Chitosan-Based Edible Coating on Storage Quality of Common Carp (Cyprinus carpio) Fillets

Edible coatings have recently been developed and applied to different food matrices, due to their numerous benefits, such as increasing the shelf life of foods, improving their appearance, being vehicles of different compounds, such as extracts or oils of various spices that have antioxidant and antimicrobial activity, as well as being friendly to the environment. The objective of this research was to develop a new edible coating based on chitosan enriched with peppermint extract and to evaluate its effectiveness to inhibit microbial development in vitro and improve both the quality and shelf life of common carp (Cyprinus carpio) during refrigerated storage (4 ± 1 °C). Three treatments were used: edible coating (C + EC), edible coating +, 5% chitosan (C + ECCh) and edible coating + 1.5% chitosan + 10% peppermint (C + ECChP). Prior the coating carp fillets; the antibacterial activity and antioxidant capacity were evaluated in the peppermint extract and coating solutions. After coating and during storage, the following were determined on the fillet samples: microbiological properties, observed for ECP, an inhibition halo of 14.3 mm for Staphylococcus aureus, not being the case for Gram-negative species, for ECCh, inhibition halos of 17.6 mm, 17.1 mm and 16.5 mm for S. aureus, Salmonella typhimurium and Escherichia coli, respectively; for the ECChP, inhibition halos for S. aureus, S. typhimurium and E. coli of 20 mm, 17 mm and 16.8 mm, respectively. For the physicochemical characteristics: an increase in solubility was observed for all treatments during storage, reaching 46.7 mg SN protein/mg total protein for the control, and values below 29.1 mg SN protein/mg total protein (p < 0.05), for fillets with EC (C + EC > C + ECCh > C + ECChP, respectively at the end of storage. For the pH, maximum values were obtained for the control of 6.4, while for the fillets with EC a maximum of 5.8. For TVB-N, the fillets with different CE treatments obtained values (p < 0.05) of 33.3; 27.2; 25.3 and 23.3 mg N/100 g (control > C + E C > C + ECCh > C + ECChP respectively). Total phenolic compounds in the aqueous peppermint extract were 505.55 mg GAE/100 g dried leaves, with 98.78% antioxidant capacity in the aqueous extract and 81.88% in the EC. Biomolecule oxidation (hydroperoxide content) had a significant increase (p < 0.05) in all treatments during storage, 1.7 mM CHP/mg protein in the control, to 1.4 in C + EC, 1.27 in C + ECCh and 1.16 in C + ECChP; TBARS assay values increased in the different treatments during refrigerated storage, with final values of 33.44, 31.88, 29.40 and 29.21 mM MDA/mg protein in the control; C + EC; C + ECCh and C + ECChP respectively. In SDS -PAGE a protective effect was observed in the myofibrillar proteins of fillets with ECChP). The results indicate that the C + ECCh and C + ECChP treatments extend the shelf life of 3–5 days with respect to microbiological properties and 4–5 days with respect to physicochemical characteristics. A reduction in lipid and protein oxidation products was also observed during refrigerated storage. With these findings, this is considered a promising method to increase the shelf life of fish fillets combined with refrigeration and we are able to recommend this technology for the fish processing industry.

Evaluation of Physical, Mechanical and Antibacterial Properties of Pinto Bean Starch-Polyvinyl Alcohol Biodegradable Films Reinforced with Cinnamon Essential Oil

In the present study, various blended films from polyvinyl alcohol (PVA) and pinto bean starch (PBS) were prepared and the selected film was used to fabricate an antimicrobial packaging film. Different essential oils (EOs) were also exposed to minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) tests to find the most efficient EO against a range of microorganisms. From the primary studies, the PVA:PBS (80:20) and cinnamon essential oil (CEO) were chosen. Afterward, the blend composite film reinforced by 1, 2, and 3% CEO and several, physical, mechanical, structural, and antimicrobial attributes were scrutinized. The results showed a significant modification of the barrier and mechanical properties of the selected blended films as a result of CEO addition. Scanning electron micrographs confirmed the incorporation and distribution of CEO within the film matrix. The X-ray diffraction (XRD) patterns and Fourier transform infrared (FTIR) spectra indicated the interaction of CEO and the PVA-PBS composite. The antibacterial of the tested bacteria showed a significant increase by increasing the CEO concentration within the control film. CEO-loaded films were more effective in controlling Gram-positive bacteria compared to Gram-negative bacteria. It can be concluded that PVA-PBS-CEO films are promising candidates to produce biodegradable functional films for food and biomedical applications.

Visible Light-Curable Chitosan Ink for Extrusion-Based and Vat Polymerization-Based 3D Bioprintings

Three-dimensional bioprinting has attracted much attention for biomedical applications, including wound dressing and tissue regeneration. The development of functional and easy-to-handle inks is expected to expand the applications of this technology. In this study, aqueous solutions of chitosan derivatives containing sodium persulfate (SPS) and Tris(2,2′-bipyridyl) ruthenium(II) chloride (Ru(bpy)₃) were applied as inks for both extrusion-based and vat polymerization-based bioprinting. In both the printing systems, the curation of ink was caused by visible light irradiation. The gelation time of the solution and the mechanical properties of the resultant hydrogels could be altered by changing the concentrations of SPS and Ru(bpy)₃. The 3D hydrogel constructs with a good shape fidelity were obtained from the chitosan inks with a composition that formed gel within 10 s. In addition, we confirmed that the chitosan hydrogels have biodegradability and antimicrobial activity. These results demonstrate the significant potential of using the visible light-curable inks containing a chitosan derivative for extrusion and vat polymerization-based bioprinting toward biomedical applications.

Characterization of Chitosan Films Incorporated with Different Substances of Konjac Glucomannan, Cassava Starch, Maltodextrin and Gelatin, and Application in Mongolian Cheese Packaging

Four kinds of edible composite films based on chitosan combined with additional substances (konjac glucomannan, cassava starch, maltodextrin and gelatin) and the addition of lysozyme were prepared and used as packaging materials for Mongolian cheese. The prepared composite films were evaluated using scanning electron microscopy and Fourier transform infrared spectroscopy. The physicochemical properties of all chitosan composite films, including thickness, viscosity, opacity, color, moisture content, water vapor permeability, tensile strength and elongation at break, were measured. The results show that Konjac glucomannan–chitosan composite film presented the strongest mechanical property and highest transparency. The cassava starch–chitosan composite film presented the highest water barrier property. The study on the storage characteristics of Mongolian cheese was evaluated at 4 °C. The results show that the cheese packaging by cassava starch–chitosan composite film presented better treatment performance in maintaining the quality, reducing weight loss and delayering microbial growth.

Bioinspired Green Synthesis of Chitosan and Zinc Oxide Nanoparticles with Strong Antibacterial Activity against Rice Pathogen Xanthomonas oryzae pv. oryzae

Bacterial leaf blight caused by Xanthomonas oryzae pv. oryzae (Xoo) is one of the most devastating diseases, resulting in significant yield losses in rice. The extensive use of chemical antibacterial agents has led to an increase the environmental toxicity. Nanotechnology products are being developed as a promising alternative to control plant disease with low environmental impact. In the present study, we investigated the antibacterial activity of biosynthesized chitosan nanoparticles (CSNPs) and zinc oxide nanoparticles (ZnONPs) against rice pathogen Xoo. The formation of CSNPs and ZnONPs in the reaction mixture was confirmed by using UV-vis spectroscopy at 300-550 nm. Moreover, CSNPs and ZnONPs with strong antibacterial activity against Xoo were further characterized by scanning and transmission electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction. Compared with the corresponding chitosan and ZnO alone, CSNPs and ZnONPs showed greater inhibition in the growth of Xoo, which may be mainly attributed to the reduction in biofilm formation and swimming, cell membrane damage, reactive oxygen species production, and apoptosis of bacterial cells. Overall, this study revealed that the two biosynthesized nanoparticles, particularly CSNPs, are a promising alternative to control rice bacterial disease.