Coffee Silverskin: A Review on Potential Cosmetic Applications

Biocomposites of Cellulose Isolated from Coffee Processing By-Products and Incorporation in Poly(Butylene Adipate-Co-Terephthalate) (PBAT) Matrix: An Overview

With its extensive production and consumption, the coffee industry generates significant amounts of lignocellulosic waste. This waste, primarily comprising coffee biomasses, is a potential source of cellulose. This cellulose can be extracted and utilized as a reinforcing agent in various biocomposites with polymer matrices, thereby creating high-value products. One such biodegradable polymer, Poly(butylene adipate-co-terephthalate) (PBAT), is notable for its properties that are comparable with low-density polyethylene, making it an excellent candidate for packaging applications. However, the wider adoption of PBAT is hindered by its relatively high cost and lower thermomechanical properties compared with conventional, non-biodegradable polymers. By reinforcing PBAT-based biocomposites with cellulose, it is possible to enhance their thermomechanical strength, as well as improve their water vapor and oxygen barrier capabilities, surpassing those of pure PBAT. Consequently, this study aims to provide a comprehensive review of the latest processing techniques for deriving cellulose from the coffee industry's lignocellulosic by-products and other coffee-related agro-industrial wastes. It also focuses on the preparation and characterization of cellulose-reinforced PBAT biocomposites.

Physiochemical properties of Sarawak's adapted Liberica coffee silverskin utilizing varying solvents

This study aimed to investigate the physiochemical properties of Sarawak's adapted Liberica coffee silverskin (CS) using multiple solvents (distilled water, methanol, and ethanol) and its impact on the total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activities of the CS. The results showed that the highest TPC was observed in the methanol extract (15.24 ± 0.65 mg GAE/g), while the highest TFC was recorded when extracted with ethanol (25.14 ± 0.59 mg QE/g). The DPPH activity was also found to be highest in the ethanol extract (83.85 ± 1.78%), concurred by the results in the FRAP assay as the highest reduction was also in ethanol (11.40 ± 18.57 μmol FSE/g). These findings demonstrate that the bioactive compounds of CS extracted can be greatly influenced by the choice of solvent while highlighting the potential for Sarawak's adapted Liberica CS to be further harnessed into a value-added product and enabling a better by-product waste management.

In Vitro and In Vivo Anti-Aging Effect of Coffee Berry Nanoliposomes

Encapsulation of bioactive compounds in the liposome system provides several advantages, such as enhancing the stability and lowering the toxicity of active compounds. Coffee berry extract (CBE) has previously been established to have in vitro anti-aging properties and to retard the aging of human skin. The purposes of this study were to encapsulate CBE in nanoliposomes and to assess its stability and in vitro anti-aging potential in human dermal fibroblasts (HDF), as well as in healthy human skin. In the HDF model, anti-aging potential was determined by nitric oxide (NO) and collagenase inhibition assays and a superoxide dismutase (SOD) activity assay, whereas in healthy human skin (in vivo), the skin elasticity and brightness were examined. First, liposomal CBE (L-CBE) was created with a particle size of 117.33 ± 2.91 nm, a polydispersity index (PDI) of 0.36 ± 0.03, and a zeta potential of -56.13 ± 1.87 mV. The percentages of encapsulation efficacy (%EE) and loading efficacy (%LE) were 71.26 ± 3.12% and 2.18 ± 0.18%, respectively. After undergoing a 12-week stability test, the L-CBE retained more phenolic content than the free CBE when stored at 4 °C, room temperature, and 45 °C. Compared to free CBE, the L-CBE demonstrated a more consistent, elevated, and prolonged release of phenolics from the lipid system. In human dermal fibroblasts, L-CBE showed lower toxicity, and at its maximum nontoxic concentration (10 mg/mL), it exhibited slightly higher anti-aging effects than CBE, including NO inhibition, enhanced SOD activity, and anti-collagenase activities. In clinical trials (30 volunteer subjects), none of the participants' skin was irritated when the L-CBE, the CBE, or base creams were applied. After 2 weeks of application, the L-CBE and CBE creams both demonstrated an improvement in skin elasticity and a reduction in melanin levels, and after 4 weeks, L-CBE cream showed a significantly greater improvement in skin elasticity and lightening. The results demonstrate that the encapsulation of the CBE in liposomal systems could increase its stability and skin penetration, reduce its toxicity, and maintain its anti-aging effect, which is powerful enough to be exploited in anti-aging and whitening agents for application in cosmetics and cosmeceuticals.

A Comparative Analysis of Phenolic Content, Antioxidant Activity, Antimicrobial Activity, and Chemical Profile of Coffea robusta Extracts Using Subcritical Fluid Extraction and Supercritical Carbon Dioxide Extraction

In this study, extracts of Robusta-roasted coffee were obtained using various extraction techniques, including subcritical fluid extractions using HFC-134a and HCFC-22 under room-temperature batch extraction, frozen-temperature batch extraction, and continuous extraction conditions. Additionally, supercritical carbon dioxide (SCCO2) extraction was performed using ethanol and tetrahydrofuran as co-solvents. These extractions were performed due to the presence of potent antioxidants and antibacterial substances in the extracts. Extraction machines were built to process the extraction. The antioxidant potential of the extracts was evaluated using total phenolic content and DPPH and FRAP assays, while antibacterial potential was identified using the disk diffusion method. The results showed that HCFC-22 extraction produced the highest yield compared to other extraction methods, but HFC-134a extraction had the highest antioxidant potential values. The yield and antioxidant potential of the extracts obtained using room-temperature batch extraction were slightly higher than those obtained using frozen-temperature batch extraction and continuous extraction. The yield and antioxidant potential of the extracts obtained using SCCO2 extraction were similar to those obtained using HFC-134a and HCFC-22 extractions, and co-solvents slightly improved the extraction performance. The extracts were found to be more effective as inhibitors of Gram-positive bacteria than Gram-negative bacteria. Caffeine was the most prominent tentative chemical compound in all coffee extracts. This research study provides a better understanding of various extraction techniques using HFC-134a, HCFC-22, and SCCO2 when applied to roasted Robusta coffee beans, with a focus on yield, antioxidant potential, antimicrobial potential, and tentative chemical profiles.

From Coffee Waste to Active Ingredient for Cosmetic Applications

Coffee silverskin (CS) is the thin epidermis covering and protecting the coffee bean and it represents the main by-product of the coffee roasting process. CS has recently gained attention due to its high content in bioactive molecules and the growing interest in valuable reutilization of waste products. Drawing inspiration from its biological function, here its potential in cosmetic applications was investigated. CS was recovered from one of the largest coffee roasters located in Switzerland and processed through supercritical CO₂ extraction, thereby generating coffee silverskin extract. Chemical profiling of this extract revealed the presence of potent molecules, among which cafestol and kahweol fatty acid esters, as well as acylglycerols, β-sitosterol and caffeine. The CS extract was then dissolved in organic shea butter, yielding the cosmetic active ingredient SLVR'Coffee™. In vitro gene expression studies performed on keratinocytes showed an upregulation of genes involved in oxidative stress responses and skin-barrier functionality upon treatment with the coffee silverskin extract. In vivo, our active protected the skin against Sodium Lauryl Sulfate (SLS)-induced irritation and accelerated its recovery. Furthermore, this active extract improved measured as well as perceived skin hydration in female volunteers, making it an innovative, bioinspired ingredient that comforts the skin and benefits the environment.

Hydroxypropyl-β-Cyclodextrin-Based Helichrysum italicum Extracts: Antioxidant and Cosmeceutical Activity and Biocompatibility

Two Helichrysum italicum extracts, OPT-1 (rich in phenolic acids) and OPT-2 (rich in total phenols and flavonoids), were prepared using hydroxypropyl-β-cyclodextrin (HP-β-CD)-assisted extraction. The prepared extracts were rich in phenolic compounds, including flavonoids and phenolic acids. GC-MS analysis of the extracts identified neryl acetate, neo-intermedeol, β-selinene, γ-curcumene, italidione I, and nerol as the main volatile components of the extracts, as well as plant sterols, γ-sitosterol, campesterol, and stigmasterol. The antioxidant (DPPH radical scavenging, reducing power, and a carotene linoleic acid assay) and cosmeceutical (anti-hyaluronidase, anti-tyrosinase, anti-lipoxygenase, ovalbumin anti-coagulation, and a UV-absorption assay) activity of the extracts in most of the assays was better than the activity of the applied positive controls. Especially low were the IC50 values of the extracts in the anti-hyaluronidase (14.31 ± 0.29 μL extract/mL and 19.82 ± 1.53 μL extract/mL for OPT-1 and OPT-2, respectively) and the anti-lipoxygenase (0.96 ± 0.11 μL extract/mL and 1.07 ± 0.01 μL extract/mL for OPT-1 and OPT-2, respectively) assays. The extracts were non-toxic to HaCaT cells in concentrations of up to 62.5 µL extract/mL assuring their status as excellent candidates for cosmeceutical product development appropriate for direct use in cosmetic products without solvent evaporation.

Recent patent applications for coffee and coffee by-products as active ingredients in cosmetics

OBJECTIVE

Coffee is one of the most consumed beverages worldwide, and its production and consumption generate large amounts of by-products annually. Coffee by-products and coffee beans are rich in bioactive compounds of great commercial value, including potential applications as active ingredients in skin care products and cosmetic formulations. In addition, there has been growing interest in the use of natural ingredients for cosmetic purposes. Considering the importance of coffee in the world economy, its chemical constituents with potential for cosmetic and dermatological application, and the importance of patents for innovation and technological development, the present study aimed to review recent patents involving coffee and coffee by-product use in cosmetics.

METHODS

This review was carried out using Espacenet. The following inclusion criteria were established: patents that included the terms "coffee" and "skin" in the title, abstract and claims and belonged to the classification A61Q, which is related to the "specific use of cosmetics or similar toilet preparations" considering the International Patent Classification (IPC) or Cooperative Patent Classification (CPC).

RESULTS

Considering the 52 patents analysed, the bean was the main way to obtain extracts (39), followed by green beans (7), silverskin (3), peel and pulp (1), pulp (1) and beans and leaves (1). The formulations are mainly intended for use in nonspecific areas of skin (29), eye areas (12), scalp hair (9) and lip skin (2) with claims of anti-ageing, moisturizers, sun protection, hair growth, anti-dandruff, etc. CONCLUSION: Coffee and its residues have high amounts of phenolic compounds, caffeine, fatty acids and other substances known to have important biological properties for the skin. Coffee and its by-products are promising ingredients to be incorporated into topical formulations, ensuring skin health benefits and reducing the environmental impact.

Extraction Optimization, Antioxidant, Cosmeceutical and Wound Healing Potential of Echinacea purpurea Glycerolic Extracts

Echinacea purpurea is a plant with immunomodulating properties, often used in topical preparations for treatment of small superficial wounds. In the presented study, the best conditions for ultrasound-assisted extraction of caffeic acid derivatives (caftaric and cichoric acid) (TPA-opt extract), as well as the conditions best suited for preparation of the extract with high radical scavenging activity (RSA-opt extract), from E. purpurea aerial parts were determined. A Box-Behnken design based on glycerol content (%, w/w), temperature (°C), ultrasonication power (W) and time (min) as independent variables was performed. Antioxidant, antiaging and wound healing effects of the two prepared extracts were evaluated. The results demonstrate that glycerol extraction is a fast and efficient method for preparation of the extracts with excellent radical scavenging, Fe²⁺ chelating and antioxidant abilities. Furthermore, the extracts demonstrated notable collagenase, elastase and tyrosinase inhibitory activity, indicating their antiaging properties. Well-pronounced hyaluronidase-inhibitory activities, with IC₅₀ values lower than 30 μL extract/mL, as well as the ability to promote scratch closure in HaCaT keratinocyte monolayers, even in concentrations as low as 2.5 μL extract/mL (for RSA-opt), demonstrate promising wound healing effects of E. purpurea. The fact that the investigated extracts were prepared using glycerol, a non-toxic and environmentally friendly solvent, widely used in cosmetics, makes them suitable for direct use in specialized cosmeceutical formulations.

Design of encapsulation method for chlorogenic acid and caffeine in coffee waste by-product

INTRODUCTION

Coffee silver skin (CSS) is a thin covering over green coffee seeds inside coffee cherry. It is a good source of bioactive compounds like chlorogenic acid and caffeine. It is produced as a by-product of the roasting process.

OBJECTIVE

The goal of this study is to apply spray drying method to encapsulate 5-O-caffeoylquinic acid (chlorogenic acid) and caffeine extracted from CSS.

METHODS

The main-plots for optimisation were feed solid concentration (2.5, 5, 10°Bx), and the sub-plots of the whole-plot were carrier material type (maltodextrin, modified starch, arabic gum) and inlet air temperature (130, 160, 190°C). Responses included were drying yield, chlorogenic acid concentration, caffeine content, Carr index, and solubility values.

RESULTS

Suitable conditions were spray drying inlet temperature of 190°C, extract concentration of 10°Bx, and wall material composition [modified starch/arabic gum (MS:AG)] 10.5:9.5. As the feeding CSS extract concentration increased, the amount of chlorogenic acid and caffeine in the final powder increased, while the powder's flow characteristics improved.

CONCLUSIONS

The concentration stage might be used to produce free-flowing powdered particles with good bioactive retention for use in the food processing industry.

Coffee Silver Skin-Health Safety, Nutritional Value, and Microwave Extraction of Proteins

The aim of this research was to evaluate the health safety (concentrations of pesticide residues and heavy metals) and nutritional parameters (macro- and microminerals and crude fibre) of coffee silver skin (CS), as well to isolate proteins from this by-product using an optimised microwave extraction method. The CS by-product samples showed the highest amount of potassium, followed by calcium, magnesium, and sodium. Iron was found in the highest quantity among the microminerals, followed by copper, manganese, zinc, and chromium. The CS sample showed a large amount of fibre and a moderate quantity of proteins obtained by the optimised microwave extraction method. Four heavy metals (nickel, lead, arsenic, and cadmium) were detected, and all were under the permitted levels. Among the 265 analysed pesticides, only three showed small quantity. The results for the proteins extracted by microwave showed that the total protein concentration values ranged from 0.52 ± 0.01 mg/L to 0.77 ± 0.07 mg/L. The highest value of the concentration of total proteins (0.77 ± 0.07 mg/L) was found in the sample treated for 9 min, using a power of 200 W. Based on these results, it can be concluded that CS is a healthy and nutritionally rich nutraceutical that could be used in the production of new products in the food industry and other industries.

Chlorogenic Acids and Caffeine from Coffee By-Products: A Review on Skincare Applications

Upcycling is a modern trend in the cosmetic sector, focusing on by-products reuse and waste reduction. Consumers are more aware of the origin of cosmetic products and their environmental impact, promoting the upcycling phenomenon. Converting these raw materials into products of higher quality or value contributes to the final product’s sustainability. In fact, several agri-food by-products that are typically discarded have generated great interest, due to their value-added compounds with high functionality and/or bioactivity. Coffee is well known as a cosmetic ingredient, particularly due to the presence of phenolic compounds, such as chlorogenic acids, and caffeine. Caffeine is widely used in cosmetic formulations due to its photoprotector and anti-aging properties, as well as lipolytic action in cellulitis, and hair regrowth. Chlorogenic acids are powerful antioxidants and exhibit anti-aging and photoprotector abilities. Coffee by-products, such as coffee beans, possess these bioactive compounds and other chemical characteristics that can provide functional properties in cosmetic formulations. Coffee silverskin and spent coffee grounds are high-volume by-products of the coffee industry. Their use has been explored in different cosmetic formulations demonstrating safety, stability, acceptability as well as skin improvement, thus supporting their valorization as natural and sustainable new ingredients in skincare products.

Sustainability issues along the coffee chain: From the field to the cup

The coffee industry is one of the most important commercial value chains worldwide. Nonetheless, it is also associated to several social, economic, and environmental concerns that impair its sustainability. The present review is focused on these main sustainability concerns from the field to the coffee cup, as well as on the strategies that are being developed and/or implemented to attain sustainability and circular economy principles in the different chain segments. In this context, distinct approaches have been applied, such as sustainable certifications (e.g., voluntary sustainability standards), corporate sustainability initiatives, direct trade, relationship coffee concepts, geographical indication, legislations, waste management, and byproducts valorization, among others. These strategies are addressed and discussed throughout this review, as well as their recognized advantages and limitations. Overall, there is still a long way to go to attain the much-desired sustainability in the coffee chain, being essential to join the efforts of all actors and entities directly or indirectly involved, namely, producers, retailers, roasters, governments, educational institutions (such as universities and scientific research institutes), and organizations.

Green/Roasted Coffee and Silverskin Extracts Inhibit Sugar Absorption by Human Intestinal Epithelial (Caco-2) Cells by Decreasing GLUT2 Gene Expression

Moderate coffee ingestion has been associated with a decrease in type 2 diabetes risk, mainly due to its richness in chlorogenic acids (CGA). To explore this, extracts of green beans, roasted beans, and silverskin were prepared by aqueous ultrasound-assisted extraction and characterized by a reversed-phase high-performance liquid chromatography-photodiode array detector (RP-HPLC-DAD). The effects on the uptake of glucose and fructose by human intestinal epithelial (Caco-2) cells and the influence on the expression of sugar transporter genes (by RT-qPCR) were investigated and compared. The uptake of ³H-deoxy-D-glucose and ¹⁴C-fructose by Caco-2 cells was significantly reduced by all the extracts, with green coffee (which also contained higher amounts of CGA) achieving the highest efficiency. Although silverskin presented the lowest amounts of CGA and caffeine, it promoted an inhibitory effect similar to the effects of green/roasted beans. In the case of glucose uptake, the effect was even higher than for roasted coffee. This activity is explained by the ability of the extracts to markedly decrease GLUT2, but not GLUT5 gene expression. In addition, a decrease in SGLT1 gene expression was also found for all extracts, although not at a statistically significant rate for silverskin. This study also revealed a synergistic inhibitory effect of caffeine and 5-CQA on the uptake of sugars. Thus, silverskin appears as an interesting alternative to coffee, since the valorization of this by-product also contributes to the sustainability of the coffee chain.

Can coffee silverskin be a useful tool to fight metabolic syndrome?

Coffee is one of the most consumed products in the world, and its by-products are mainly discarded as waste. In order to solve this problem and in the context of a sustainable industrial attitude, coffee by-products have been studied concerning their chemical and nutritional features for a potential application in foodstuffs or dietary supplements. Under this perspective, coffee silverskin, the main by-product of coffee roasting, stands out as a noteworthy source of nutrients and remarkable bioactive compounds, such as chlorogenic acids, caffeine, and melanoidins, among others. Such compounds have been demonstrating beneficial health properties in the context of metabolic disorders. This mini-review compiles and discusses the potential health benefits of coffee silverskin and its main bioactive components on metabolic syndrome, highlighting the main biochemical mechanisms involved, namely their effects upon intestinal sugar uptake, glucose and lipids metabolism, oxidative stress, and gut microbiota. Even though additional research on this coffee by-product is needed, silverskin can be highlighted as an interesting source of compounds that could be used in the prevention or co-treatment of metabolic syndrome. Simultaneously, the valorization of this by-product also responds to the sustainability and circular economy needs of the coffee chain.

Coffee Silverskin: Chemical and Biological Risk Assessment and Health Profile for Its Potential Use in Functional Foods

The coffee supply chain is characterized by a complex network with many critical and unsustainable points producing a huge amount of waste products. Among these, coffee silverskin (CS), the only by-product of the coffee roasting phase, has an interesting chemical profile that suggests potential use as a food ingredient. However, few data on its safety are available. For this reason, the purpose of the study was to assess the occurrence of chemical and biological contaminants in CS, and the resulting risk due to its potential consumption. Essential, toxic, and rare earth elements, polycyclic aromatic hydrocarbons (PAHs), process contaminants, ochratoxin A (OTA), and pesticides residues were analyzed in three classes of samples (Coffea arabica CS, Coffea robusta CS, and their blend). Furthermore, total mesophilic bacteria count (TMBC) at 30 °C, Enterobacteriaceae, yeasts, and molds was evaluated. The risk assessment was based upon the hazard index (HI) and lifetime cancer risk (LTCR). In all varieties and blends, rare earth elements, pesticides, process contaminants, OTA, and PAHs were not detected except for chrysene, phenanthrene, and fluoranthene, which were reported at low concentrations only in the arabica CS sample. Among essential and toxic elements, As was usually the most representative in all samples. Microorganisms reported a low load, although arabica and robusta CS showed lower contamination than mixed CS. Instead, the risk assessment based on the potential consumption of CS as a food ingredient did not show either non-carcinogenic or carcinogenic risk. Overall, this study provides adequate evidence to support the safety of this by-product for its potential use in functional foods.

Valorization of Coffee Silverskin through Subcritical Water Extraction: An Optimization Based on T-CQA Using Response Surface Methodology

Coffee silverskin (CS) is the only byproduct of the roasting process for coffee beans and is rich in phenolic compounds with various bioactivities. This study proposes a valorization option for bioactive compounds (T-CQA) based on a subcritical water extraction (SWE) technique, which is known for its high efficiency and feasibility for use on an industrial scale. The use of water as a sole solvent requires a minimum number of cleaning steps and renders the extract safe for further applications, such as in either the cosmetic or food industry. Response surface methodology with a Box–Behnken design is effectively used to optimize and explain the individual and interactive process variables (i.e., extraction temperature, extraction time, and solid–liquid ratio) on the T-CQA content obtained from coffee silverskin by the SWE technique. The final model exhibits a precise prediction of the experimental data obtained for the maximum T-CQA content. Under the optimum conditions, the CS extract is found to contain a higher content of T-CQA and TPC than that reported previously. For antioxidant activity, up to 26.12 ± 3.27 mg Trolox equivalent/g CS is obtained.

The effect of reactor scale on biochars and pyrolysis liquids from slow pyrolysis of coffee silverskin, grape pomace and olive mill waste, in auger reactors

Several studies have addressed the potential biorefinery, through small-scale pyrolysis, of coffee silverskin (CSS), grape pomace (GP) and olive mill waste (OMW), which are respectively the main solid residues from coffee roasting, wine making and olive oil production processes. However, increasing the scale of reactor to bring these studies to an industrial level may affect the properties, and hence applications, of the resulting products. The aim of this study is therefore to perform pilot scale experiments to compare and verify the results of analytical study (TGA) and bench scale reactor runs, in order to understand the fundamental differences and create correlations between pyrolysis runs at different scales. To this end, pyrolysis liquids and biochars from the slow pyrolysis of CSS, GP and OMW, performed using different scale auger reactors (15 kg/h and 0.3 kg/h), have been analysed (TGA, pH, density, proximate and ultimate analyses, HHV, FTIR, GCMS) and compared. The results showed no major differences in biochars when the temperature and the solid residence time were fixed. However, regarding pyrolysis liquids, compounds from the lab reactor were more degraded than pilot plant ones, due to, in this case, the vapour residence time was longer. Regarding the properties of the pyrolysis products, GP 400 °C biochars showed the best properties for combustion; CSS biochars were especially rich in nitrogen, and 400 °C GP and OMW pyrolysis liquids showed the highest number of phenolics. Hence, this study is considered a first step towards industrial scale CSS, GP and OMW pyrolysis-based biorefinery.

Effect of Coffee Berry Extract on Anti-Aging for Skin and Hair—In Vitro Approach

The aging process encompasses gradual and continuous changes at the cellular level that slowly accumulate with age. The signs of aging include many physiological changes in both skin and hair such as fine lines, wrinkles, age spots, hair thinning and hair loss. The aim of the current study was to investigate the anti-aging potential of coffee berry extract (CBE) on human dermal fibroblast (HDF) and hair follicle dermal papilla (HFDP) cells. Coffee berry was extracted by 50% ethanol and determined for chemical constituents by HPLC technique. Cytotoxicity of the extract was examined on both cells by MTT assay. Then, HDF cells were used to evaluate antioxidant properties by using superoxide dismutase activity (SOD) and nitric oxide inhibition as well as anti-collagenase inhibition assays. The effectiveness of anti-hair loss properties was investigated in HFDP cells by considering cell proliferation, 5α-reductase inhibition (5AR), and growth factor expression. The results showed that caffeine and chlorogenic acid were identified as major constituents in CBE. CBE had lower toxicity and cell proliferation than caffeine and chlorogenic acid on both cells. CBE showed SOD and nitric oxide inhibition activities that were higher than those of caffeine but lower than those of chlorogenic acid. Interestingly, CBE had the highest significant anti-collagenase activity, and its 5AR inhibition activity was comparable to that of chlorogenic acid, which was higher than caffeine. CBE also stimulated hair-related gene expression, especially insulin-like growth factor 1 (IGF-1), keratinocyte growth factor (KGF) and vascular endothelial growth factor (VEGF). The results confirmed that CBE provided anti-aging activity on both skin and hair cells and could be beneficial for applications in cosmeceuticals.

Evaluation of secondary metabolites of herbal plant extracts as an antiviral effect on infectious bursal disease virus isolates in embryonated chicken eggs

BACKGROUND AND AIM

Infectious bursal disease attacks the poultry industry, mainly young chickens, causing immunosuppression, and death with high economic losses. This study aimed to evaluate the effects of the monoextract, diextracts, and triextracts of Quercus infectoria (QI), Citrus aurantifolia (CiA), and Coffea arabica (CoA) on infectious bursal disease virus (IBDV) in embryonated chicken eggs (ECEs).

MATERIALS AND METHODS

The experimental design consisted of three sets of ECEs at 11 days of age, and each set included seven groups (G1-G7). The extracts of QI, CiA, and CoA were inoculated to ECEs by the chorioallantoic membrane method before, in concomitant (mixed) with, and after IBDV infection to the first, second, and third sets, respectively. The monoextract, diextracts, and triextracts of QI, CiA, and CoA were given at 1%, 2%, 5%, and 10% concentrations to G1-G3, G4-G6, and G7, respectively. Real-time polymerase chain reaction identified and confirmed the virus in accordance with the pathological changes.

RESULTS

The monoextract (5-10% concentrations) inhibited IBDV and had no effect on viral infection preinoculation, whereas the monoextract (10% concentration) inhibited IBDV during mixed inoculation and post-inoculation. Diextracts (2-10% concentrations) inhibited IBDV and had no effect on viral infection preinoculation, whereas diextracts (5-10% concentrations) inhibited IBDV during mixed inoculation and post-inoculation. Triextracts (1%, 2%, 5%, and 10% concentrations) inhibited IBDV by ameliorating the pathological changes of the virus and preventing the death of ECEs.

CONCLUSION

The inoculation of herbal extracts, particularly triextracts, alleviates the pathological changes in ECEs infected with IBDV. This study recommends the oral route in evaluating plant extracts against IBDV in poultry.

Coffee Silver Skin: Chemical Characterization with Special Consideration of Dietary Fiber and Heat-Induced Contaminants

Coffee silver skin is produced in large amounts as a by-product during the coffee roasting process. In this study, coffee silver skin of the species Coffea arabica L. and Coffea canephora Pierre ex A. Froehner as well as silver skin pellets produced in the coffee industry were characterized with respect to both nutritional value and potential heat-induced contaminants. Enzymatic-gravimetric/chromatographic determination of the dietary fiber content showed values ranging from 59 to 67 g/100 g with a comparably high portion of soluble fiber, whereas low molecular weight soluble fiber was not detected. Compositional and methylation analysis indicated the presence of cellulose and xylans in the insoluble dietary fiber fraction, whereas pectic polysaccharides dominate the soluble dietary fiber fraction. The protein content as determined by the Kjeldahl method was in the range of 18 to 22 g/100 g, and all essential amino acids were present in coffee silver skin; whereas fat contents were low, high ash contents were determined. Elemental analysis by inductively coupled plasma mass spectrometry (ICP-MS) showed the presence of macroelements in large amounts, whereas toxic mineral elements were only detected in trace amounts or being absent. Acrylamide was quantified with levels of 24–161 µg/kg. Although 5-hydroxymethylfurfural was detected, its concentration was below the limit of determination. Furfuryl alcohol was not detected.

Characterization of Coffee Silver Skin as Potential Food-Safe Ingredient

By-products from the coffee industry are produced in large amounts each year. Among other wastes, coffee silver skin (CSS) is highly available and more stable due to its lower content of water. This research aimed to characterize coffee silver skin composition and evidence its potentiality for use as a food-safe ingredient in new formulations. Results showed an average total dietary fiber content of 50% but with a higher ratio for insoluble than soluble fiber. A high content of total phenolic compounds, chlorogenic acid, caffeine, and caffeic acid was found and correlated with the high measured antioxidant capacity. Moreover, minerals (e.g., calcium, magnesium, phosphorous, potassium, copper, iron, manganese) important for human wellbeing were found at a high level in CSS, while toxic minerals (e.g., nickel) were found at low levels. In conclusion, coffee silver skin could have an advantageous role for the recovery of valuable compounds and as a potential food-safe ingredient.

Potential applications of by-products from the coffee industry in polymer technology - Current state and perspectives

Coffee is one of the most popular beverages in the world, and its popularity is continuously growing, which can be expressed by almost doubling production over the last three decades. Cultivation, processing, roasting, and brewing coffee are known for many years. These processes generate significant amounts of by-products since coffee bean stands for around 50% of the coffee cherry. Therefore, considering the current pro-ecological trends, it is essential to develop the utilization methods for the other 50% of the coffee cherry. Among the possibilities, much attention is drawn to polymer chemistry and technology. This industry branch may efficiently consume different types of lignocellulosic materials to use them as fillers for polymer composites or as intermediate sources of particular chemical compounds. Moreover, due to their chemical composition, coffee industry by-products may be used as additives modifying the oxidation resistance, antimicrobial, or antifungal properties of polymeric materials. These issues should be considered especially important in the case of biodegradable polymers, whose popularity is growing over the last years. This paper summarizes the literature reports related to the generation and composition of the coffee industry by-products, as well as the attempts of their incorporation into polymer technology. Moreover, potential directions of research based on the possibilities offered by the coffee industry by-products are presented.

Coffee silverskin and starch-rich potato washing slurries as raw materials for elastic, antioxidant, and UV-protective biobased films

Food processing wastes together with the perishable foodstuff loss promote environmental and societal concerns. Food byproducts can have value as a source of functional molecules for developing active packaging without food waste, under a circular economy. Nevertheless, the often-associated extraction/chemical processes compromise the sustainability of food byproducts reusability. In this work, coffee silverskin (CS) and starch, recovered from coffee roasting and potato industries, respectively, were together gelatinized to form in-situ films. Targeting to fit with the food application requirements, it is important to understand the influence of crude CS amount (1%, 5%, and 10% w/w of dry starch weight) on potato starch-based film properties. CS conferred a brownish coloration to the films, maintaining their transparency. The films colour intensity, antioxidant activity, and water tolerance were directly related with the CS dosage. Moreover, as high the CS amount, higher the elasticity, stretchability, and UV radiation absorption of the pristine films. These data emphasized that CS molecules extracted during gelatinization prevented the starch-starch hydrogen bonding and conferred functional and barrier properties. Overall, adding crude CS during potato starch gelatinization revealed to be an efficient strategy to tune the performance of potato starch-based films, opening an opportunity for valorising coffee roasting and potato byproducts.

Synthesis of Dietetic Structured Lipids from Spent Coffee Grounds Crude Oil Catalyzed by Commercial Immobilized Lipases and Immobilized Rhizopus oryzae Lipase on Biochar and Hybrid Support

The aim of this study was the valorization of coffee industry residues, namely spent coffee grounds (SCG) as a source of oil, and silverskin (CS) as a source of both oil and biomass, under the concept of the circular economy. Therefore, crude oil from SCG was used to produce low-calorie structured lipids (SL) for food and pharmaceutical industries, and CS to produce biochar by pyrolysis for biotechnological uses. SL were obtained by acidolysis with caprylic or capric acid, or interesterification with ethyl caprylate or ethyl caprate, in solvent-free media, catalyzed by immobilized sn-1,3 regioselective lipases. Silverskin biochar (BIO) was directly used as enzyme carrier or to produce hybrid organic-silica (HB) supports for enzyme immobilization. Rhizopus oryzae lipase (ROL) immobilized on Amberlite (AMB), silica (SIL), BIO or HB, and the commercial immobilized Thermomyces lanuginosus (Lipozyme TL IM) and Rhizomucor miehei (Lipozyme RM IM) lipases were tested. Lipozyme RM IM showed better results in SL production than Lipozyme TLIM or ROL on BIO, SIL or HB. About 90% triacylglycerol conversion was attained after 7 h acidolysis or interesterification. Lipozyme RM IM was more stable in interesterification (80% and 65% activity with ethyl caprylate or ethyl caprate) than in acidolysis (first-order decay) after 10 reuses.

Evaluation of Green Coffee-Roasting Biogas with Modeling Valorization of Possible Solutions

According to the European Union Directive 2009/28/EC, the goals of obtaining 20% of all energy requirements from renewable sources and a 20% reduction in primary energy use must be fulfilled by 2020. In this work, an evaluation was performed, from the environmental and energy point of view, of anaerobic digestion as a valid solution for the treatment of the byproducts obtained from the coffee-roasting process. In particular, thermophilic anaerobic digestion tests were carried out. Output values from the laboratory were used as input for the MCBioCH₄ model to evaluate the produced flow of biogas and biomethane and two different biogas valorization alternatives, namely, the traditional exploitation of biogas for heat/energy production and biomethane conversion. The results of the preliminary simulation showed that a full-scale implementation of the coffee waste biogas production process is technically feasible and environmentally sustainable. Furthermore, the performed analysis validates a general methodology for energy production compatibility planning.

Applications of Compounds from Coffee Processing By-Products

To obtain the coffee beverage, approximately 90% of the edible parts of the coffee cherry are discarded as agricultural waste or by-products (cascara or husk, parchment, mucilage, silverskin and spent coffee grounds). These by-products are a potential source of nutrients and non-nutrient health-promoting compounds, which can be used as a whole ingredient or as an enriched extract of a specific compound. The chemical composition of by-products also determines food safety of the novel ingredients. To ensure the food safety of coffee by-products to be used as novel ingredients for the general consumer population, pesticides, mycotoxins, acrylamide and gluten must be analyzed. According with the priorities proposed by the Food Agriculture Organization of the United Nations (FAO) to maximize the benefit for the environment, society and economy, food waste generation should be avoided in the first place. In this context, the valorization of food waste can be carried out through an integrated bio-refinery approach to produce nutrients and bioactive molecules for pharmaceutical, cosmetic, food and non-food applications. The present research is an updated literature review of the definition of coffee by-products, their composition, safety and those food applications which have been proposed or made commercially available to date based on their chemical composition.

Characterization of Odor-Active Compounds, Polyphenols, and Fatty Acids in Coffee Silverskin

For the first time the volatile fraction of coffee silverskin has been studied focusing on odor-active compounds detected by gas chromatography-olfactometry/flame ionization detector (GC-O/FID) system. Two approaches, namely headspace (HS) analysis by solid-phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) and odor-active compounds analysis by gas chromatography-olfactometry/flame ionization detector (GC-O/FID), have been employed to fully characterize the aroma profile of this by-product. This work also provided an entire characterization of the bioactive compounds present in coffee silverskin, including alkaloids, chlorogenic acids, phenolic acids, flavonoids, and secoiridoids, by using different extraction procedures and high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) system. Coffee silverskin was shown to be a good source of caffeine and chlorogenic acids but also of phenolic acids and flavonoids. In addition, the fatty acid composition of the coffee silverskin was established by GC-FID system. The results from this research could contribute to the development of innovative applications and reuses of coffee silverskin, an interesting resource with a high potential to be tapped by the food and nutraceutical sector, and possibly also in the cosmetics and perfumery.

Chemical Composition, Antioxidant and Enzyme Inhibitory Properties of Different Extracts Obtained from Spent Coffee Ground and Coffee Silverskin

In a world where an eco-friendlier approach is becoming more and more necessary, it is essential to reduce waste production and to reuse residues of the company’s supply chain. Coffee silverskin (CS) and spent coffee ground (SCG), two by-products of coffee production, are important sources of bioactive compounds and, for this, some authors have proposed their reuse in the nutraceutical, food, and cosmetic sector. However, their potential enzyme inhibitory properties have been poorly investigated. Hence, the objective of the current work was to study the enzymatic inhibitory activities against acetylcholinesterase, butyrylcholinesterase, α-amylase, α-glucosidase, and tyrosinase of different extracts of CS and SCG. Before these in vitro bioassays, the phytochemical composition of each extract was investigated via colorimetric assays and HPLC-MS/MS analysis. In addition, the antioxidant activities were evaluated by different chemical approaches. SCG extracts contained a higher content of bioactive compounds, notably the SCG EtOH:H₂O extract was the richest in caffeine and possessed the highest antioxidant activities. The hydroalcoholic and methanolic extracts were shown to be the most active against all tested enzymes, while the water extracts displayed lower activity. Our results showed a weak correlation between bioactive compounds and enzyme inhibitory effects, proving inhibitory activities likely due to non-phenolic molecules such as alkaloids and terpenoids. Obtained findings could be a starting point to develop novel nutraceuticals from CS and SCG.

Depigmentation and Anti-aging Treatment by Natural Molecules

Natural molecules are becoming more accepted choices as cosmetic agents, many products in the market today claim to include natural components. Plants include many substances that could be of a value in the whitening of the skin and working as anti-aging agents. A wide range of articles related to natural skin whitening and anti-aging agents have been reviewed. Many plant-derived and natural molecules have shown to affect melanin synthesis by different mechanisms, examples include Arbutin, Ramulus mori extract, Licorice extract, Glabridin, Liquiritin, Kojic acid, Methyl gentisate, Aloesin, Azelaic acid, Vitamin C, Thioctic acid, Soya bean extracts, Niacinamide, α and β-hydroxy acids, Lactic acid, Chamomile extract, and Ellagic acid. Some of the widely used natural anti-aging products as natural antioxidants, collagen, hyaluronic acid, and coenzyme Q can counteract the effects of reactive oxygen species in skin cells and have anti-aging properties on the skin. It was concluded that many natural products including antioxidants can prevent UV-induced skin damage and have whitening and anti-aging effects. It is very important to develop and stabilize appropriate methods for the evaluation of the whitening and anti-aging capacity of natural products and their exact mechanism of action to ensure real efficacy based on evidence-based studies. The attention should be oriented on the formulations and the development of an appropriate vehicle to ensure suitable absorption of these natural products in addition to evaluating the suitable concentration of these molecules required having the desired effects without causing harmful side effects.

Coffee silverskin extracts: Quantification of 30 bioactive compounds by a new HPLC-MS/MS method and evaluation of their antioxidant and antibacterial activities

The research of value-added applications for coffee silverskin (CSS) requires studies to investigate potential bioactive compounds and biological activities in CSS extracts. In this study, different ultrasound-assisted extraction (UAE) methods have been tested to extract bioactive compounds from CSS. The obtained extracts, were characterized using a new HPLC-MS/MS method to detect and quantify 30 bioactive compounds of 2 classes: alkaloids and polyphenols (including phenolic acids, flavonoids, and secoiridoids). CSS extracts obtained with ethanol/water (70:30) as extraction solvent showed the highest levels (p ≤ 0.05) of bioactive compounds (4.01 ± 0.34% w/w). High content of caffeine was observed with levels varying from 1.00% to 3.59% of dry weight of extract (dw). 18 phenolic compounds were detected in CSS extracts with caffeoylquinic acids (3-CQA, 5-CQA and 3,5-diCQA) as the most abundant polyphenols (3115.6 µg g to -5444.0 µg g^-1). This study is also one of the first to characterize in-depth flavonoids in CSS revealing the levels of different flavonoids compounds such as rutin (1.63-8.70 µg g^-1), quercetin (1.53-2.46 µg g^-1), kaempferol (0.76-1.66 µg g^-1) and quercitrin (0.15-0.51 µg g^-1). Neuroprotective activity of silverskin extracts against H₂O₂-induced damage was evaluated for the first time suggesting for methanol and ethanol/water (70:30) extracts a potential role as protective agents against neurodegeneration due to their ability to counteract oxidative stress and maintain cell viability. Silverskin extracts were not inhibiting the growth of anyone of the bacterial species included in this study but data obtained by water extract might deserve a deeper future investigation on biofilm-related activities, such as quorum sensing or virulence factors' expression. From their composition and their evidenced biological activities, CSS extracts could represent valuable ingredients in nutraceutical formulations.

Antidiabetic and Cosmeceutical Potential of Common Barbery (Berberis vulgaris L.) Root Bark Extracts Obtained by Optimization of 'Green' Ultrasound-Assisted Extraction

Berberis vulgaris is rich in berberine, an isoquinoline alkaloid, with antidiabetic activity, often used topically for skin-related problems. The aim of this work was to develop a “green” method for berberine extraction using mixtures of water with glycerol, a non-toxic, environmentally-friendly solvent. Response surface methodology based on Box–Behnken design was used to optimize the experimental conditions for ultrasound-assisted extraction of berberine and anti-radical components from B. vulgaris root bark. The independent variables were temperature (X₁), glycerol concentration (X₂), and ultrasound power (X₃), while the responses were berberine concentration and DPPH radical scavenging activity of the extracts (RSA IC₅₀). The response values of the extracts prepared at optimum conditions were (response, X₁, X₂, X₃): berberine yield (145.5 μg/mL; 80 °C, 50%, 144 W) and RSA IC₅₀ (58.88 μL/mL; 80 °C, 30%, 720 W). The observed values deviated from the predicted values by −3.45% and 6.42% for berberine and RSA IC₅₀, respectively, thus indicating the validity of the selected models. The prepared extracts demonstrated antioxidant, anti-melanogenic, and anti-inflammatory activity, as well excellent α-glucosidase and α-amylase inhibitory activity. The displayed biological properties and lack of glycerol toxicity makes the prepared extracts suitable for direct inclusion into antidiabetic and dermatologic food supplements and topical products.

Glycerolic Licorice Extracts as Active Cosmeceutical Ingredients: Extraction Optimization, Chemical Characterization, and Biological Activity

A green ultrasound-assisted extraction (UAE) method using glycerol/water mixtures for extraction of licorice (Glycyrrhiza glabra) bioactive constituents was developed in this study. The response surface method, according to the Box-Behnken design, was employed to optimize the extraction parameters: glycerol concentration (X₁), temperature (X₂), and the amount of herbal drug used in the production (X₃). The responses were content of total phenols (TP), TP extraction efficiency (TPy) and the content of licorice characteristic constituents, glabridin (Gla) and isoliquiritigenin (Iso). Response surface analysis predicted the optimal extraction conditions for maximized amounts of TP, Tpy, Gla, and Iso. The extracts were prepared using the calculated conditions. The analysis of the selected constituents confirmed the validity of the model. Furthermore, biological activity of the extracts was tested. The results demonstrate that UAE using glycerol is a fast and efficient method for preparation of extracts with excellent radical scavenging, Fe²⁺ chelating and antioxidant activity. Furthermore, the observed notable tyrosinase and elastase inhibitory activity of the extracts, as well as their anti-inflammatory activity, indicate the anti-aging properties of the investigated extracts. The fact that the extracts were prepared using the safe, cosmetically active solvent, glycerol, makes them suitable for direct use in specialized cosmeceutical formulations.

Response surface methodology to optimise the heat-assisted aqueous extraction of phenolic compounds from coffee parchment and their comprehensive analysis

Coffee parchment is one of the less studied coffee by-products, being rich in phenolic compounds. The objective of this study was to revalorise coffee parchment, obtaining aqueous extracts rich in phenolic compounds, optimising the extraction conditions using response surface methodology and comprehensively characterising the obtained extracts. A Box-Behnken design was used to maximise the recovery of total phenolic compounds, total flavonoids, total flavanols, total phenolic acids, and total ortho-diphenols, and the antioxidant capacity of coffee parchment extracts. The main factor influencing phenolic compound extraction was temperature, followed by solid-to-solvent ratio and acidity. Optimised heat-assisted extraction conditions were 100 °C, 90 min, 0% citric acid, and 0.02 g mL^-1 solid-to-solvent ratio. Under these conditions, the concentrations of phenolic compounds and antioxidant capacity were equivalent to those expected, allowing us to validate the model. The UPLC-ESI-MS/MS phenolic profile exhibited the occurrence of 13 phenolic compounds, with those shown in higher concentrations being chlorogenic acid, vanillic acid, protocatechuic acid, and p-coumaric acid. The findings of this study provide valuable insights into the potential application of a useful, clean, environmentally friendly and cost-effective method to recover phenolic compounds from coffee parchment and, thus, to revalorize the by-product by converting it into high-added value new products to be used in the food and cosmetic industries.

Coffea canephora silverskin from different geographical origins: A comparative study

Coffee silverskin is the major by-product of coffee roasting. Among all the coffee by-products, it is a relatively stable product due to its low moisture content. Currently, silverskin is used as direct fuel (e.g. firelighters), for composting and soil fertilization. As it is a natural source of several bioactive compounds that can be extracted and further used for food or dermocosmetic purposes, the valorization of this by-product is of utmost importance, having in view the sustainability and circular economy principles. The aim of this work was to evaluate, for the first time, the influence of different geographical origins (Brazil, Uganda, Vietnam, Cameroon, Indonesia, and India) on the chemical composition of silverskin obtained from Coffea canephora beans. Different parameters were analysed, including ashes, protein, soluble and insoluble fiber, and total lipid amounts; vitamin E, fatty acid and phenolics profiles (by HPLC-DAD-FLD, GC-FID, and HPLC-DAD, respectively); caffeine, 5‑caffeoylquinic acid and hydroxymethyfurfural contents (by HPLC-DAD); and antioxidant profile (total phenolics and flavonoids contents, DPPH inhibition, and Ferric Reducing Antioxidant Power). Significant differences (p < 0.05) were found between the samples, especially regarding the fatty acid profile and the antioxidant composition. For instance, the Brazilian silverskin was the richest in total lipids and vitamin E, while the Indian silverskin was the poorest in phenolics and antioxidant activity, and presented a higher relative percentage of saturated fatty acids. A Principal Component Analysis allowed to group the studied samples according to their geographical proximity.

Effect of Different Compatibilizers on Sustainable Composites Based on a PHBV/PBAT Matrix Filled with Coffee Silverskin

This work investigates the feasibility of using coffee silverskin (CSS), one of the most abundant coffee waste products, as a reinforcing agent in biopolymer-based composites. The effect of using two compatibilizers, a maleinized linseed oil (MLO) and a traditional silane (APTES, (3-aminopropyl)triethoxysilane), on mechanical and thermal behavior of sustainable composites based on a poly(butylene adipate-co-terephthalate/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) PBAT/PHBV blend filled with coffee silverskin, in both the as-received state and after the extraction of antioxidants, was studied. Thermal (by differential scanning calorimetry), mechanical (by tensile testing), and morphological properties (by scanning electron microscopy) of injection molded biocomposites at three different weight contents (10, 20, and 30 wt %) were considered and discussed as a function of compatibilizer type. The effects of extraction procedure and silane treatment on surface properties of CSS were investigated by infrared spectroscopy. Obtained results confirmed that extracted CSS and silane-treated CSS provided the best combination of resistance properties and ductility, while MLO provided a limited compatibilization effect with CSS, due to the reduced amount of hydroxyl groups on CSS after extraction, suggesting that the effects of silane modification were more significant than the introduction of plasticizing agent.