Optimization of Arthrospira platensis (Spirulina) Growth: From Laboratory Scale to Pilot Scale

Exogenous Trehalose Improves Growth, Glycogen and Poly-3-Hydroxybutyrate (PHB) Contents in Photoautotrophically Grown Arthrospira platensis under Nitrogen Deprivation

Glycogen and poly-3-hydroxybutyrate (PHB) are excellent biopolymer products from cyanobacteria. In this study, we demonstrate that nitrogen metabolism is positively influenced by the exogenous application of trehalose (Tre) in Arthrospira platensis under nitrogen-deprived (-N) conditions. Cells were cultivated photoautotrophically for 5 days under -N conditions, with or without the addition of exogenous Tre. The results revealed that biomass and chlorophyll-a content of A. platensis experienced enhancement with the addition of 0.003 M and 0.03 M Tre in the -N medium after one day, indicating relief from growth inhibition caused by nitrogen deprivation. The highest glycogen content (54.09 ± 1.6% (w/w) DW) was observed in cells grown for 2 days under the -N + 0.003 M Tre condition (p < 0.05), while the highest PHB content (15.2 ± 0.2% (w/w) DW) was observed in cells grown for 3 days under the -N + 0.03 M Tre condition (p < 0.05). The RT-PCR analysis showed a significant increase in glgA and phaC transcript levels, representing approximately 1.2- and 1.3-fold increases, respectively, in A. platensis grown under -N + 0.003 M Tre and -N + 0.03 M Tre conditions. This was accompanied by the induction of enzyme activities, including glycogen synthase and PHA synthase with maximal values of 89.15 and 0.68 µmol min-1 mg-1 protein, respectively. The chemical structure identification of glycogen and PHB from A. platensis was confirmed by FTIR and NMR analysis. This research represents the first study examining the performance of trehalose in promoting glycogen and PHB production in cyanobacteria under nitrogen-deprived conditions.

A photobioreactor for production of algae biomass from gaseous emissions of an animal house

Sustainable approaches to circular economy in animal agriculture are still poorly developed. Here, we report an approach to reduce gaseous emissions of CO2 and NH3 from animal housing while simultaneously using them to produce value-added biomass. To this end, a cone-shaped, helical photobioreactor was developed that can be integrated into animal housing by being freely suspended, thereby combining a small footprint with a physically robust design. The photobioreactor was coupled with the exhaust air of a chicken house to allow continuous cultivation of a mixed culture of Arthrospira spec. (Spirulina). Continuous quantification of CO2 and NH3 concentration showed that the coupled algae reactor effectively purifies the exhaust air from the chicken house while producing algal biomass. Typical production rates of greater than 0.3 g/l*day dry mass were obtained, and continuous operation was possible for several weeks. Morphological, biochemical, and genomic characterization of Spirulina cultures yielded insights into the dynamics and metabolic processes of the microbial community. We anticipate that further optimization of this approach will provide new opportunities for the generation of value-added products from gaseous CO2 and NH3 waste emissions, linking resource-efficient production of microalgae with simultaneous sequestration of animal emissions. KEY POINTS: • Coupling a bioreactor with exhaust gases of chicken coop for production of biomass. • Spirulina mixed culture removes CO2 and NH3 from chicken house emissions. • High growth rates and biodiversity adaptation for nitrogen metabolism. Towards a sustainable circular economy in livestock farming. The functional coupling of a helical tube photobioreactor with exhaust air from a chicken house enabled the efficient cultivation of Spirulina microalgae while simultaneously sequestering the animals' CO2 and NH3 emissions.

Techno-economic assessment of co-production of edible bioplastic and food supplements from Spirulina

Large amount of plastic wastes harming the environment have raised concerns worldwide on finding alternatives to non-biodegradable plastics. Microalgae has been found as a potential source for bioplastic production, besides its more common application in the pharmaceutical and nutraceutical industry. In this study, the objective was to techno-economically evaluate the large-scale co-production of Spirulina powder as food supplements and edible bioplastic for food packaging. The scale of production was large enough to satisfy 1% of local (Thailand) plastic demand (i.e., approx. 1200 MT y-1), and 1% of the global Spirulina demand (approx. 1000 MT y-1) as food supplements. Results showed that the co-production of the Spirulina powder and bioplastic revealed an attractive venture with a payback time (PBT) as low as 2.6 y and ROI as high as 38.5%. This was because the revenues generated were as high as US$ 55.6 million y-1, despite high capital (US$ 55.7 million) and operating (US$ 34.9 million y-1) costs. Sensitivity analysis showed differences in the profitability based on variations of major parameters in the study, where the split ratio of biomass used for food supplement versus bioplastic production and the bioplastic's selling price were found to be the most sensitive.

Microalgae-Sustainable Source for Alternative Proteins and Functional Ingredients Promoting Gut and Liver Health

Dietary proteins derived from animal sources, although containing well-balanced profiles of essential amino acids, have considerable environmental and adverse health effects associated with the intake of some animal protein-based products. Consuming foods based on animal proteins carries a higher risk of developing non-communicable diseases such as cancer, heart disease, non-alcoholic fatty liver disease (NAFLD), and inflammatory bowel disease (IBD). Moreover, dietary protein consumption is increasing due to population growth, posing a supply challenge. There is, therefore, growing interest in discovering novel alternative protein sources. In this context, microalgae have been recognized as strategic crops that can provide a sustainable source of protein. Compared to conventional high-protein crops, using microalgal biomass for protein production presents several advantages in food and feed in terms of productivity, sustainability, and nutritional value. Moreover, microalgae positively impact the environment by not exploiting land or causing water pollution. Many studies have revealed the potential of microalgae as an alternative protein source with the added value of positive effects on human health due to their anti-inflammatory, antioxidant, and anti-cancer properties. The main emphasis of this review is on the potential health-promoting applications of microalgae-based proteins, peptides, and bioactive substances for IBD and NAFLD.

Not so dangerous? PET microplastics toxicity on freshwater microalgae and cyanobacteria

Microalgae and cyanobacteria are among the most important primary producers and are responsible for the production of 50-80% of the oxygen on Earth. They can be significantly affected by plastic pollution, as the vast majority of plastic waste ends up in rivers and then the oceans. This research focuses on green microalgae Chlorella vulgaris (C. vulgaris), Chlamydomonas reinhardtii (C. reinhardtii), filamentous cyanobacterium Limnospira (Arthrospira) maxima (L.(A.) maxima) and how they are affected by environmentally relevant PET-MPs (polyethylene-terephtalate microplastics). Manufactured PET-MPs have asymmetric shape, size between 3 and 7 μm and were used in concentrations ranging from 5 mg/L to 80 mg/L. The highest inhibitory rate of growth was found in C. reinhardtii (-24%). Concentration-dependent changes in chlorophyll a composition were found in C. vulgaris and C. reinhardtii, not in L. (A.) maxima. Furthermore, cell damage was detected in all three organisms by CRYO-SEM (shriveling, cell wall disruption), but the cyanobacterium was the least damaged. A PET-fingerprint was detected on the surface of all tested organisms using FTIR, indicating the adherence of PET-MPs. The highest rate of PET-MPs adsorption was detected in L. (A.) maxima. Specifically, characteristic spectra were observed at ∼721, 850, 1100, 1275, 1342, and 1715 cm^-1 which are specific for functional groups of PET-MPs. Nitrogen and carbon content significantly increased in L. (A.) maxima under exposure to 80 mg/L due to the PET-MPs adherence and mechanical stress. In all three tested organisms, weak exposure-related ROS generation was detected. In general, cyanobacteria seem to be more resistant to the effects of MPs. However, organisms in the aquatic environment are exposed to MPs over a longer time scale, so it is important to use the present findings for further longer-term experiments on environmentally relevant organisms.

Competitive algae biodiesel depends on advances in mass algae cultivation

The aim of this review was to study why, despite large investments in research and development, algae biodiesel is still not price competitive with fossil fuels. Microalgal production was confirmed to be a critical cost item (84 up to 93 %) for biodiesel regardless of the production technology. Techno-economic assessment revealed the main cost drivers during mass cultivation. It is argued that a breakthrough in the cultivation efficiency of microalgae is identified as a necessary condition for achieving price-competitive microalgal biodiesel. The key bottlenecks were identified as follows: (1) light and O₂ concentration management; (2) overnight respiratory loss of oil. It is concluded that most of the research on microalgae biodiesel yields economically over-optimistic presumptions because it has been based on laboratory scale experiments with a low level of interdisciplinary overlap.

Cyanobacteria and Algal-Based Biological Life Support System (BLSS) and Planetary Surface Atmospheric Revitalizing Bioreactor Brief Concept Review

Exploring austere environments required a reimagining of resource acquisition and utilization. Cyanobacterial in situ resources utilization (ISRU) and biological life support system (BLSS) bioreactors have been proposed to allow crewed space missions to extend beyond the temporal boundaries that current vehicle mass capacities allow. Many cyanobacteria and other microscopic organisms evolved during a period of Earth’s history that was marked by very harsh conditions, requiring robust biochemical systems to ensure survival. Some species work wonderfully in a bioweathering capacity (siderophilic), and others are widely used for their nutritional power (non-siderophilic). Playing to each of their strengths and having them grow and feed off of each other is the basis for the proposed idea for a series of three bioreactors, starting from regolith processing and proceeding to nutritional products, gaseous liberation, and biofuel production. In this paper, we discuss what that three reactor system will look like, with the main emphasis on the nutritional stage.

Complete Genome Sequence of Phormidium yuhuli AB48, Isolated from an Industrial Photobioreactor Environment

We report the genome of Phormidium yuhuli AB48, which includes a circular chromosome and a circular plasmid (4,747,469 bp and 51,599 bp, respectively). This is currently the only closed reference genome of an isolate of the Phormidium genus, based on the Genome Taxonomy Database (GTDB), providing a potential model system for sustainable biotechnology innovation.

Sustainable Production of Pigments from Cyanobacteria

Pigments are intensely coloured compounds used in many industries to colour other materials. The demand for naturally synthesised pigments is increasing and their production can be incorporated into circular bioeconomy approaches. Natural pigments are produced by bacteria, cyanobacteria, microalgae, macroalgae, plants and animals. There is a huge unexplored biodiversity of prokaryotic cyanobacteria which are microscopic phototrophic microorganisms that have the ability to capture solar energy and CO2 and use it to synthesise a diverse range of sugars, lipids, amino acids and biochemicals including pigments. This makes them attractive for the sustainable production of a wide range of high-value products including industrial chemicals, pharmaceuticals, nutraceuticals and animal-feed supplements. The advantages of cyanobacteria production platforms include comparatively high growth rates, their ability to use freshwater, seawater or brackish water and the ability to cultivate them on non-arable land. The pigments derived from cyanobacteria and microalgae include chlorophylls, carotenoids and phycobiliproteins that have useful properties for advanced technical and commercial products. Development and optimisation of strain-specific pigment-based cultivation strategies support the development of economically feasible pigment biorefinery scenarios with enhanced pigment yields, quality and price. Thus, this chapter discusses the origin, properties, strain selection, production techniques and market opportunities of cyanobacterial pigments.

Tendencies Affecting the Growth and Cultivation of Genus Spirulina: An Investigative Review on Current Trends

Spirulina, a kind of blue-green algae, is one of the Earth's oldest known forms of life. Spirulina grows best in very alkaline environments, although it may flourish across a wide variety of pH values. There are several techniques for growing Spirulina spp., ranging from open systems such as ponds and lakes, which are vulnerable to contamination by animals and extraterrestrial species, to closed systems such as photovoltaic reactors, which are not. Most contaminated toxins come from other toxic algae species that become mixed up during harvest, necessitating the study of spirulina production processes at home. Lighting, temperature, inoculation volume, stirring speed, dissolved particles, pH, water quality, and overall micronutrient richness are only a few of the environmental parameters influencing spirulina production. This review article covers the conditions required for spirulina cultivation, as well as a number of crucial factors that influence its growth and development while it is being grown. In addition, the article discusses harvesting processes, biomass measurement methods, the identification of dangerous algae, and the risk of contaminating algae as it grows on cultures. Spirulina's rising prospects as food for human consumption are a direct outcome of its prospective health and therapeutic advantages.

Microalgae/cyanobacteria: the potential green future of vitamin B12 production

This review summarizes the available information about potential sources of vitamin B12, especially for people who follow a vegan or vegetarian diet and inhabitants of poor countries in the developing world. Cyanobacteria and microalgae approved for food purposes can play a critical role as promising and innovative sources of this vitamin. This work involves a discussion of whether the form of vitamin B12 extracted from microalgae/cyanobacteria is biologically available to humans, specifically focusing on the genera Arthrospira and Chlorella. It describes analyses of their biomass composition, cultivation requirements, and genetic properties in B12 production. Furthermore, this review discusses the function of cobalamin in microalgae and cyanobacteria themselves and the possibility of modification and cocultivation to increase the content of B12 in their biomass.

Environmental Impacts of Large-Scale Spirulina (Arthrospira platensis) Production in Hellisheidi Geothermal Park Iceland: Life Cycle Assessment

Spirulina algae (Spirulina platensis) cultivated in geothermally powered photobioreactors is here proposed as a potentially resource efficient, zero-carbon, and nutritious alternative to conventional beef meat. Employing a standard life cycle assessment, environmental impacts of large-scale Spirulina production in this facility are calculated. The production facility is sited in Orka náttúrunnar (ON Power) Geothermal Park, Iceland, and benefits from resource streams accessible through Hellisheiði (Hellisheidi) power station, including renewable electricity for illumination and power usage, hot and cold water streams for thermal management, freshwater for cultivation, and CO₂ for biofixation. During cultivation, GHG-intensive ammonia-based fertilizers are replaced with macronutrients sourced from natural open mines. LCA results show that production of 1 kg of wet edible biomass in this facility requires 0.0378 m² non-arable land, 8.36 m³ fresh water and is carbon neutral with - 0.008 CO₂-eq GHG emissions (net zero). Compared with conventionally produced meat from beef cattle, Spirulina algae cultured in the ON Power Geothermal Park, referred to in this study as GeoSpirulina, requires less than 1% land and water and emits less than 1% GHGs. Considering food and nutritional security concerns, cultivation in a controlled environment agriculture system assures consistent nutritional profile year-round. Moreover, GeoSpirulina biomass assessed in this study contains all essential amino acids as well as essential vitamins and minerals. While keeping a balanced nutrition, for every kg beef meat replaced with one kg GeoSpirulina, the average consumer can save ~ 100 kg CO₂-eq GHGs. It is concluded that environmental impacts of GeoSpirulina production in the Hellisheidi facility are considerably lower than those of conventionally produced ruminants.

LC-MS/MS Validation and Quantification of Cyanotoxins in Algal Food Supplements from the Belgium Market and Their Molecular Origins

Food supplements are gaining popularity worldwide. However, harmful natural compounds can contaminate these products. In the case of algae-based products, the presence of toxin-producing cyanobacteria may cause health risks. However, data about the prevalence of algal food supplements on the Belgian market and possible contaminations with cyanotoxins are scarce. Therefore, we optimized and validated a method based on Ultra High Performance Liquid Chromatography-Tandem Mass Spectrometry to quantify eight microcystin congeners and nodularin in algal food supplements. Our analytical method was successfully validated and applied on 35 food supplement samples. Nine out of these samples contained microcystin congeners, of which three exceeded 1 µg g−1, a previously proposed guideline value. Additionally, the mcyE gene was amplified and sequenced in ten products to identify the taxon responsible for the toxin production. For seven out of these ten samples, the mcyE gene could be amplified and associated to Microcystis sp. EFSA and posology consumption data for algal-based food supplements were both combined with our toxin prevalence data to establish different toxin exposure scenarios to assess health risks and propose new guideline values.

The Assessment of the Real-Time Radiative Properties and Productivity of Limnospira platensis in Tubular Photobioreactors

The development of tools to predict the photobioreactors' (PBRs) productivity is a significant concern in biotechnology. To this end, it is required to know the light availability inside the cultivation unit and combine this information with a suitable kinetic expression that links the distribution of radiant energy with the cell growth rate. In a previous study, we presented and validated a methodology for assessing the radiative properties necessary to address the light distribution inside a PBR for varying illuminating conditions through the cultivation process of a phototrophic microorganism. Here, we sought to utilise this information to construct a predictive tool to estimate the productivity of an autotrophic bioprocess carried out in a 100 [L] tubular photobioreactor (TPBR). Firstly, the time-dependent optical properties over ten batch cultures of L. platensis were calculated. Secondly, the local volumetric rate of photon absorption was assessed based on a physical model of the interaction of the radiant energy with the suspended biomass, together with a Monte Carlo simulation algorithm. Lastly, a kinetic expression valid for low illumination conditions has been utilised to reproduce all the cultures' experimentally obtained dry weight biomass concentration values. Taken together, time-dependent radiative properties and the kinetic model produced a valuable tool for the study and scaling up of TPBRs.

Growth of Spirulina Maxima in an Optimized Concentric Internal Tube Photobioreactor

BACKGROUND

Microalgae have the potential to generate high-value products. The design of photobioreactors (PBRs), in which microalgae are cultured, is crucial because alterations in their configuration and operational conditions can affect the biomass production and productivity.

OBJECTIVE

The objective of this study was to optimize the diameter of the internal tube of an airlift PBR and to characterize the growth of Spirulina maxima in an optimized design.

MATERIAL AND METHODS

S. maxima was cultured in a mineral medium without an organic carbon source. The PBR consisted of an acrylic cylinder with an operational volume of 7 L. Daily determinations of biomass (by filtration), chlorophyll, N-NO₃ and P-PO₄ (spectrophotometrically) were carried out.

RESULTS

The use of a concentric tube with a diameter of 3 inches led to an increased biomass concentration of 1.14 ± 0.136 g.L_-1, allowing a global biomass productivity of 153 mg.L_-1.d_-1. The culture reached a volumetric consumption velocity of 27.34 ± 1.596 and 2.29 ± 0.353 mg.L_-1.d_-1 for N and P, respectively.

CONCLUSIONS

It was concluded that operational conditions must be specifically selected for each cultivated strain and that this configuration of airlift PBR can produce Spirulina biomass under laboratory conditions with a high biomass productivity.

Iron Speciation and Iron Binding Proteins in Arthrospira platensis Grown in Media Containing Different Iron Concentrations

Cyanobacteria are characterized by high iron content. This study investigated the effects of varying iron concentrations (1, 5, and 10 mg L^-1) in the culture media on the biochemical composition and the iron bioaccumulation and speciation in Arthrospira platensis F&M-C256. Iron content measured in biomasses varied from 0.35 to 2.34 mg g^-1 dry weight depending on the iron concentration in the culture media. These biomasses can be considered of interest for the production of spirulina-based supplements with low and high iron content. Iron speciation was studied using size exclusion chromatography followed by atomic absorption spectrometry and proteomic analysis. The role of C-phycocyanin as an iron binding protein was also investigated. Overall, the present results provide a better understanding of iron metabolism in cyanobacteria and a foundation for further studies.

Fish Food Production Using Agro-Industrial Waste Enhanced with Spirulina sp

The supply of animal feed is one of the main concerns of producers in the aquaculture industry, including aspects such as the cost of fish flour and its nutritional balance. The aim of this study was the preparation of a pellet-type fish food using powdered Spirulina sp. cultivated as a protein source supplemented with agro-industrial waste, and its evaluation to comply with the necessary parameters for the elaboration of extruded pellets. Spirulina sp. was cultivated in a photobioreactor at a volume of 50 L, separated by decantation and dried. The proximal characterization was 6.79% ± 0.05 moisture, 6.93% ± 0.01 ash, 66.88% ± 0.33 protein, and 5.50% ± 0.26 fat. Subsequently, flours were prepared using cassava leaves, gliricidia leaves, and rice husks. The results for the cohesion showed that the flours obtained to comply with the necessary parameters for the elaboration of extruded food. The fish feed was prepared in pellet form using the formulation for fattening Tilapia: Spirulina sp. (20%), cassava leaf flour (50%), gliricidia leaf flour (20%) and flour of rice husk (10%). Floatation analysis showed that 60% of the pellets floated for more than 40 min, and 80% retained their shape for 4 h. The results show that the obtained product can be used as fish feed, due to the lowest disintegration, together with its great capacity for water absorption and especially, its greater flotage due to the expansion effect, are physic characteristic determinants so that the fish has more time to consume extruded diets and avoid losses.

Cultivation of Arthrospira platensis in Brewery Wastewater

Cultivation of photosynthetic microorganisms in wastewater is a potential cost-effective method of treating wastewater and simultaneously providing the essential nutrients for high-value biomass production. This study investigates the cultivation of the cyanobacterium Arthrospira platensis in non-diluted and non-pretreated brewery wastewater under non-sterile and alkaline growth conditions. The system’s performance in terms of biomass productivity, pollutant consumption, pigment production and biomass composition was evaluated under different media formulations (i.e., addition of sodium chloride and/or bicarbonate) and different irradiation conditions (i.e., continuous illumination and 16:8 light:dark photoperiod). It was observed that the combination of sodium bicarbonate with sodium chloride resulted in maximum pigment production recorded at the end of the experiments, and the use of the photoperiod led to increased pollutant removal (up to 90% of initial concentrations) and biomass concentration (950 mg/L). The composition of the microbial communities established during the experiments was also determined. It was observed that heterotrophic bacteria dominated by the phyla of Pseudomonadota, Bacillota, and Bacteroidota prevailed, while the cyanobacteria population showcased a dynamic behavior throughout the experiments, as it increased towards the end of cultivation (relative abundance of 10% and 30% under continuous illumination and photoperiod application, respectively). Overall, Arthrospira platensis-based cultivation proved to be an effective method of brewery wastewater treatment, although the large numbers of heterotrophic bacteria limit the usage of the produced biomass to applications such as biofuel and biofertilizer production.

Determination of optical markers of cyanobacterial physiology from fluorescence kinetics

Compared to other methods to monitor and detect cyanobacteria in phytoplankton populations, fluorometry gives rapid, robust and reproducible results and can be used in situ. Fluorometers capable of providing biomass estimates and physiological information are not commonly optimized to target cyanobacteria. This study provides a detailed overview of the fluorescence kinetics of algal and cyanobacterial cultures to determine optimal optical configurations to target fluorescence mechanisms that are either common to all phytoplankton or diagnostic to cyanobacteria. We confirm that fluorescence excitation channels targeting both phycocyanin and chlorophyll a associated to the Photosystem II are required to induce the fluorescence responses of cyanobacteria. In addition, emission channels centered at 660, 685 and 730 nm allow better differentiation of the fluorescence response between algal and cyanobacterial cultures. Blue-green actinic light does not yield a robust fluorescence response in the cyanobacterial cultures and broadband actinic light should be preferred to assess the relation between ambient light and photosynthesis. Significant variability was observed in the fluorescence response from cyanobacteria to the intensity and duration of actinic light exposure, which needs to be taken into consideration in field measurements.

Arthrospira platensis Cultivation in a Bench-Scale Helical Tubular Photobioreactor

Cultivations of Arthrospira platensis were carried out to evaluate the CO2 capture capacity of this cyanobacterium under bench-scale conditions. For this purpose, the influence of light intensity on the microbial growth and the photosynthetic efficiency has been investigated in a helical photobioreactor. Five cultivations were performed at different photosynthetic photon flux densities (23 ≤ PPFD ≤ 225 µmol photons m−2 s−1) by fed-batch pulse-feeding pure carbon dioxide from a cylinder into the helicoidal photobioreactor. In particular, a range of PPFD (82–190 µmol photons m−2 s−1) was identified in which biomass concentration reached values (9–11 gDW L−1) significantly higher than those reported in the literature for other configurations of closed photobioreactors. Furthermore, as A. platensis suspensions behave as Newtonian and non-Newtonian (pseudoplastic) fluids at very low and high biomass concentrations, respectively, a flow analysis was carried out for evaluating the most suitable mixing conditions depending on growth. The results obtained in this study appear to be very promising and suggest the use of this helicoidal photobioreactor configuration to reduce CO2 emissions from industrial gaseous effluents.

Hepatoprotective effect of Spirulina platensis against carbon tetrachloride-induced liver injury in male rats

OBJECTIVES

Spirulina platensis (SP) is an edible Cyanobacterium with ethnomedicinal significance. This study aims at evaluating the beneficial effect of SP against carbon tetrachloride (CCl4)-induced liver toxicity in male rats.

METHODS

Rats received intraperitoneal injections of CCl4 (2 ml/kg body weight [b.w.] per every other day) for 40 days, alone or in combination with oral treatments of SP (400 mg/kg b.w. per day).

KEY FINDINGS

SP attenuated haematological disturbances, serum liver markers, hepatic necrosis and inflammation, and dyslipidemia in CCl4-intoxicated rats. SP also reduced CCl4-induced oxidative stress by increasing the activities of antioxidant enzymes, such as glutathione peroxidase, superoxide dismutase and catalase and glutathione content, and inhibiting lipid peroxidation products and nitric oxide levels in the rat liver. Further investigations revealed that SP counteracted CCl4-induced increased hepatic levels of Ki-67 (a parameter of cell proliferation), interleukin-6, and tumour necrosis factor-alpha and cyclooxygenase-2 messenger RNA expression. Noticeably, the supplementation of SP restored the decrease of proapoptotic p53 protein levels in the liver of rats treated with CCl4.

CONCLUSIONS

SP prevented liver damage in CCl4-treated rats via augmentation of antioxidant defense mechanisms and inhibition of inflammatory cytokines/mediators and antiproliferative effects.

Secretomics: a biochemical footprinting tool for developing microalgal cultivation strategies

Microalgae offer a promising source of biofuel and a wide array of high-value biomolecules. Large-scale cultivation of microalgae at low density poses a significant challenge in terms of water management. High-density microalgae cultivation, however, can be challenging due to biochemical changes associated with growth dynamics. Therefore, there is a need for a biomarker that can predict the optimum density for high biomass cultivation. A locally isolated microalga Cyanobacterium aponinum CCC734 was grown with optimized nitrogen and phosphorus in the ratio of 12:1 for sustained high biomass productivity. To understand density-associated bottlenecks secretome dynamics were monitored at biomass densities from 0.6 ± 0.1 to 7 ± 0.1 g/L (2 to 22 OD) in batch mode. Liquid chromatography coupled with mass spectrometry identified 880 exometabolites in the supernatant of C. aponinum CCC734. The PCA analysis showed similarity between exometabolite profiles at low (4 and 8 OD) and mid (12 and 16 OD), whereas distinctly separate at high biomass concentrations (20 and 22 OD). Ten exometabolites were selected based on their role in influencing growth and are specifically present at low, mid, and high biomass concentrations. Taking cues from secretome dynamics, 5.0 ± 0.5 g/L biomass concentration (16 OD) was optimal for C. aponinum CCC734 cultivation. Further validation was performed with a semi-turbidostat mode of cultivation for 29 days with a volumetric productivity of 1.0 ± 0.2 g/L/day. The secretomes-based footprinting tool is the first comprehensive growth study of exometabolite at the molecular level at variable biomass densities. This tool may be utilized in analyzing and directing microalgal cultivation strategies and reduction in overall operating costs.

Biologically-Based and Physiochemical Life Support and In Situ Resource Utilization for Exploration of the Solar System-Reviewing the Current State and Defining Future Development Needs

The future of long-duration spaceflight missions will place our vehicles and crew outside of the comfort of low-Earth orbit. Luxuries of quick resupply and frequent crew changes will not be available. Future missions will have to be adapted to low resource environments and be suited to use resources at their destinations to complete the latter parts of the mission. This includes the production of food, oxygen, and return fuel for human flight. In this chapter, we performed a review of the current literature, and offer a vision for the implementation of cyanobacteria-based bio-regenerative life support systems and in situ resource utilization during long duration expeditions, using the Moon and Mars for examples. Much work has been done to understand the nutritional benefits of cyanobacteria and their ability to survive in extreme environments like what is expected on other celestial objects. Fuel production is still in its infancy, but cyanobacterial production of methane is a promising front. In this chapter, we put forth a vision of a three-stage reactor system for regolith processing, nutritional and atmospheric production, and biofuel production as well as diving into what that system will look like during flight and a discussion on containment considerations.

Long-Term Cultivation of a Native Arthrospira platensis (Spirulina) Strain in Pozo Izquierdo (Gran Canaria, Spain): Technical Evidence for a Viable Production of Food-Grade Biomass

Microalgae cultivation is a promising alternative to traditional agriculture in arid—semi-arid areas. The aim of this study is to assess the viability of long-term cultivation of native Arthrospira platensis in Gran Canaria. Maximum culture productivity (0.08 g/L/day) and optimal concentration range (0.6–0.9 g/L) were firstly determined in 8000 L raceway under a greenhouse. Afterwards, a stable productivity of 0.06 g/L/day (6.0 g/m2/day) was obtained by reusing the culture medium during 26 days of cultivation, with consistent biomass biochemical composition. Outdoor temperature and daily solar irradiation ranged between 17.9–30.7 °C and 79.2–274.8 W/m2, while culture pH and salinity were in the range 9.42–10.77 and 11.2–14.9 g/L, respectively. Protein (>60%), potassium (1.8 g/100 g) and C-phycocyanin (7.2%) content is in the high-range of commercial Spirulina, which makes BEA 1257B promising for food and extraction of natural pigments/antioxidants. The dried biomass complies with international standards for human consumption, because of low heavy metal content and no pathogens presence. Product quality can be improved by reducing ash (≃12%) and sodium (1.5%) content through biomass washing optimization and/or further dewatering step. Other microorganisms can be prevented by high alkaline conditions and mild chemical treatments. These results pave the way for a sustainable microalgae-based blue bioeconomy in the Canary Islands.

Spirulina platensis Protein as Sustainable Ingredient for Nutritional Food Products Development

Spirulina platensis, microalgae, is emerging as a sustainable source for highly nutritional food ingredient production to cover the food demands of the global population. This study aimed to characterize food prototypes supplemented with microalgae protein isolate to develop health-promoting food products. The nutritional composition (proximate composition, fatty acids, and mineral content) of the spirulina biomass, the structural characterization of spirulina platensis protein (SPP) isolates, and the physicochemical properties of SPP- developed food products were evaluated. High protein (47%), ϒ-Linolenic acid (24.45 g/100 g of fat), iron (16.27 mg/100 g), calcium (207 mg/100 g), and potassium (1675 mg/100 g) content in the spirulina biomass was found. SPP (76% of purity) with sodium alginate produced stable emulsions (>90%) during storage (14 days). Amaranth + SPP pasta resulted in good appearance, texture, color, and high nutritional value in protein (above 30%) and minerals, mainly iron (9–10 mg/100 g) and magnesium (300 mg/100 g), meeting the daily intake recommendations. In addition, the amino acid profile of the pasta was in line with the amino acid pattern requirements for adults. SPP can be considered as potential additive for emulsions stability and provided nutritional and physicochemical desired in the elaborated pasta.

Estimation of the Chlorophyll-A Concentration of Algae Species Using Electrical Impedance Spectroscopy

Algae are a significant component of a biological monitoring program in an aquatic ecosystem. They are ideally suited for water quality assessments because of their nutrient requirements, rapid reproduction rate, and very short life cycle. Algae composition and temporal variation in abundances are important in determining the trophic level of lakes, and those can be estimated by the Chlorophyll-a (Chl-a) concentration of the species. In this work, a non-destructive method was employed to estimate the Chlorophyll-a concentration of multiple algae species using electrical impedance spectroscopy (EIS). The proposed EIS method is rapid, cheaper, and suitable for in situ measurements compared with the other available non-destructive methods, such as spectrophotometry and hyperspectral or multispectral imaging. The electrical impedances in different frequencies ranging from 1 to 100 kHz were observed using an impedance converter system. Significant observations were identified within 3.5 kHz for multiple algae species and therefore reported in the results. A positive correlation was found between the Chlorophyll-a and the measured impedance of algae species at different frequencies. Later, EIS models were developed for the species in 1–3.5 kHz. A correlation of 90% was found by employing a least squares method and multiple linear regression. The corresponding coefficients of determination were obtained as 0.9, 0.885, and 0.915, respectively for 49 samples of Spirulina, 41 samples of Chlorella, and 26 samples of mixed algae species. The models were later validated using a new and separate set of samples of algae species.

Natural pigments from microalgae grown in industrial wastewater

The aim of this study was to investigate the cultivation of Nostoc sp., Arthrospira platensis and Porphyridium purpureum in industrial wastewater to produce phycobiliproteins. Initially, light intensity and growth medium composition were optimized, indicating that light conditions influenced the phycobiliproteins production more than the medium composition. Conditions were then selected, according to biomass growth, nutrients removal and phycobiliproteins production, to cultivate these microalgae in food-industry wastewater. The three species could efficiently remove up to 98%, 94% and 100% of COD, inorganic nitrogen and PO₄^3--P, respectively. Phycocyanin, allophycocyanin and phycoerythrin were successfully extracted from the biomass reaching concentrations up to 103, 57 and 30 mg/g dry weight, respectively. Results highlight the potential use of microalgae for industrial wastewater treatment and related high-value phycobiliproteins recovery.

Seasonal changes in the bacterial community structure of three eutrophicated urban lakes in Mexico city, with emphasis on Microcystis spp

Artificial urban lakes commonly have physicochemical conditions that contribute to rapid anthropogenic eutrophication and development of cyanobacterial blooms. Microcystis is the dominat genus in most freshwater bodies and is one of the main producter of microcystins. Using 454-pyrosequencing we characterized the bacterial community, with special emphasis on Microcystis, in three recreational urban lakes from Mexico City in both wet and dry seasons. We also evaluated some physicochemical parameters that might influence the presence of Microcystis blooms, and we associated the relative abundance of heterotrophic and autotrophic bacterial communities with their possible metabolic capacities. A total of 14 phyla, 18 classes, 39 orders, 53 families and 48 bacterial genera were identified in both seasons in the three urban lakes. Cyanobacteria had the highest relative abundance followed by Proteobacteria and Actinobacteria. Microcystis was the dominant taxon followed by Arthrospira, Planktothrix and Synechococcus. We also found heterotrophic bacteria associated with the blooms, such as Rhodobacter, Pseudomonas, Sphingomonas and, Porphyrobacter. The highest richness, diversity and dominance were registered in the bacterial community of the Virgilio Uribe Olympic Rowing-Canoeing Track in both seasons, and the lowest values were found in the Chapultepec Lake. The canonical correspondence analysis showed that dissolved oxygen and NO₃-N concentrations might explain the presence of Microcystis blooms. The metabolic prediction indicated that these communities are involved in photosynthesis, oxidative phosphorylation, methane metabolism, carbon fixation, and nitrogen and sulfur metabolism. The lakes studied had a high prevalence of Microcystis, but average values of microcystins did not exceed the maximum permissible level established by the United States Environmental Protection Agency for recreational and cultural activities. The presence of cyanobacteria and microcystins at low to moderate concentrations in the three lakes could result in ecosystem disruption and increase animal and human health risks.

Multiproduct biorefinery from Arthrospira spp. towards zero waste: Current status and future trends

Considering the high- and low-value product perspectives, Arthrospira spp. are one of the most industrially exploited microalgae. However, currently, the biomass is being utilized for one specific product resulting in a steep upsurge in the overall production cost. Hence, to boost the economic viability of Arthrospira biorefinery process, every high- and low-value products from it ought to be valorized. Envisioning how costlier can be the multiproduct biorefinery concept owing to the downstream processing at an industrial scale, it is quite essential to look for new trends and encouraging solutions. This article intended to propose a sustainable biorefinery in the wake of the current understanding of the present constraints and challenges associated with Arthrospira biorefinery. The current review aimed at defining the future aspects of this biorefinery including integration and optimization of the culture strategy, and, implementation of new ingenious techniques to improve downstream processing (harvesting, extraction, fractionation, and purification).

Combination of nejayote and swine wastewater as a medium for Arthrospira maxima and Chlorella vulgaris production and wastewater treatment

Nejayote and swine wastewater are highly pollutant effluents and a source of organic matter load that sometimes released into water bodies (rivers or lakes), soils or public sewer system, with or without partial treatments. Nejayote is a wastewater product of alkaline cooking of maize, whereas, swine wastewater results from the primary production of pigs for the meat market. Owing to the presence of environmentally related pollutants, both sources are considered the major cause of pollution and thus require urgent action. Herein, we report a synergistic approach to effectively use and/or treat Nejayote and swine wastewater as a cost-effective culture medium for microalgae growth, which ultimately induces the removal of polluting agents. In this study, the strains Arthrospira maxima and Chlorella vulgaris were grown using different dilutions of Nejayote and swine wastewater. Both wastewaters were used as the only source of macronutrients and trace elements for growth. For A. maxima, the treatment of 10% nejayote and 90% of water (T3) resulted in a cell growth of 32 × 10⁴ cell/mL at 12 days (μ_max = 0.27/d). While, a mixture of 25% swine wastewater, 25% nejayote and 50% water (T2) produced 32 × 10⁴ cell/mL at 18 days (μ_max = 0.16/d). A significant reduction was also noted as 92% from 138 mg/L of TN, 75% from 77 mg/L of TP, and 96% from 8903 mg/L of COD, among different treatments. For C. vulgaris, the treatment of 10% swine wastewater and 90% water (T1) gave a cell growth of 128 × 10⁶ cell/mL (μ_max = 0.57/d) followed by T3 yielded 62 × 10⁶ cell/mL (μ_max = 0.70/d) and T2 yielded 48 × 10⁶ cell/mL (μ_max = 0.54/d). Up to 91% reduction from 138 mg/L of TN, 85% from 19 mg/L of TP and 96% from 4870 mg/L of COD was also recorded. These results show that microalgae can be used to treat these types of wastewater while at the same time using them as a culture media for microalgae. The resultant biomass can additionally be used for getting other sub-products of commercial interest.