A Comprehensive Review on Bio-Preservation of Bread: An Approach to Adopt Wholesome Strategies

Isolation and Characterization of a Bacillus amyloliquefaciens Bacteriophage JBA6 and Its Endolysin PlyJBA6

Bacillus amyloliquefaciens is a Gram-positive, aerobic, spore-forming bacteria usually found in soil. Despite its probiotic potential, B. amyloliquefaciens has been identified as a cause of food spoilage, including the development of off-odors, rope formation, and the production of viscous substances in a wide range of foods. To control B. amyloliquefaciens, we isolated three B. amyloliquefaciens bacteriophages TBA3, JBA3, JBA6, and characterized one representative JBA6 endolysin, PlyJBA6. Transmission electron microscopy and genomic analysis demonstrated that all three phages belong to the Salasmaviridae family, characterized by short, non-contractile tails with linear dsDNA genomes ranging from 18.7 to 19.1 kb. PlyJBA6 contains a glycoside hydrolase family 24 domain (PF00959) at the N-terminus and two LysM domains (PF04176) at the C-terminus. While JBA6 has a narrow host range, infecting only 7 out of 9 tested strains of B. amyloliquefaciens, PlyJBA6 exhibits extended lytic range beyond the Bacillus genus. Interestingly, PlyJBA6 lyses Gram-negative bacteria such as Escherichia coli, Yersinia enterocolitica and Cronobacter sakazakii without other additives to destabilize bacterial outer membrane. We assume that JBA6 might be a useful component for a phage cocktail to control B. amyloliquefaciens and that PlyJBA6 can provide insights into the development of novel biocontrol agents against various food-borne pathogens.

Reduced Doses of Diatomaceous Earth and Basil Essential Oil on Stored Grain Against the Wheat-Damaging Sitophilus oryzae: Influence on Bread Quality and Sensory Profile

Stored grain pests like Sitophilus oryzae pose significant challenges to food security and quality, necessitating eco-friendly pest management strategies. This study investigates the combined efficacy of reduced doses of diatomaceous earth (DE) and basil (Ocimum basilicum L.) essential oil (EO) as an alternative to conventional pesticides. Laboratory trials evaluated the effectiveness of the treatments-DE, EO, and a mixture of both (at halved doses)-against S. oryzae in wheat, alongside their impact on bread quality and sensory attributes. Results showed that DE and the DE + EO at halved doses combination achieved over 82% pest mortality, comparable to standard DE doses but with reduced mechanical and environmental drawbacks. EO alone demonstrated limited insecticidal activity. Bread made from treated wheat retained high sensory acceptability, with DE enhancing elasticity and crumb aroma. EO-enriched bread exhibited a complex aromatic profile due to methyl chavicol, though with reduced crumb elasticity and a slightly bitter aftertaste. Shelf-life assessments indicated that DE and DE + EO at halved doses extended mold-free storage by one day compared to untreated bread. These findings highlight the potential of combining DE and EO at reduced doses to manage stored grain pests sustainably, aligning with integrated pest management (IPM) and organic farming principles, while preserving the technological and sensory qualities of derived food products.

Glycemic impact of cereal and legume-based bakery products: Implications for chronic disease management

This review examines the glycemic impact of cereal and legume-based bakery products and their potential role in chronic disease management, particularly in type II diabetes and cardiovascular diseases. The primary objective is to assess the glycemic index (GI) and glycemic load (GL) of bakery products made from cereals such as wheat and barley, and legumes like chickpeas, and to explore their effects on postprandial blood glucose response. Cereal-based products typically exhibit higher GIs (55-80), while legume-based bakery products demonstrate lower GIs (40-50), potentially contributing to better glycemic control. Incorporating legumes into bakery formulations can lower their glycemic index by up to 25 %. Legume-enriched bakery products may effectively manage blood glucose and reduce chronic disease risks like diabetes. However, more long-term studies are needed to confirm their broader benefits. This review emphasizes the need for innovation to improve the nutritional and sensory appeal of functional foods.

Technological and microbiological characterization of an industrial soft-sliced bread enriched with chitosan and its prebiotic activity

Several studies have described the effects of chitosan as an ingredient in bread, particularly from a technological and functional point of view. However, these studies mainly focus on breads produced at lab scale with a short shelf life, which may not reflect the changes occurring in industrial production. Our study investigated the potential of using chitosan at an industrial scale to produce soft white bread, evaluating its impact on the final product's shelf life and providing deeper insights into the practical possibilities and limitations of its scalability. In particular, the rheological properties of the dough and the overall qualitative characteristics of the breads were evaluated when chitosan was used at 0.75 and 1.5%. The use of chitosan in bread dough increased its viscoelasticity, firmness and extensibility, making the dough more elastic but harder to mold and process industrially (extension resistance: 41.70 for 1.5% chitosan vs 22.55 for the control). Chitosan breads exhibited higher pH, aw (1.5%: 0.955 vs control: 0.934), firmness and a larger pore size, with a lower cut height and a more pronounced colour due to increased Maillard reactions. Microbiologically, the chitosan breads were within acceptable limits (<4 and 3 log CFU/g for aerobic mesophilic bacteria and yeasts, respectively) but showed no effect on spoilage microbiota. However, the addition of chitosan increased the prebiotic activity of the bread, as assessed by its ability to promote the growth of selected probiotics in simulated intestinal fluid, which has the potential to positively impact consumers' gut health.

Effects of heterotrophic Euglena gracilis powder on dough microstructure, rheological properties, texture, and nutritional composition of steamed bread

This study investigated the effects of incorporating different levels of Euglena gracilis microalgae powder (MP) on the dough properties, rheology, and quality attributes of Chinese steamed bread (CSB) for the first time. Moderate levels of MP (2%) reinforced the gluten network and improved protein structure, while higher levels (4-8%) adversely affected the gluten network and rheological properties. The addition of MP decreased the specific volume, pore number, and pore density of CSB, but increased pore size, hardness, and chewiness. It also imparted a yellow color to the CSB and slowed down moisture loss during storage. Notably, MP effectively increased the protein and lipid content of CSB, enhancing its nutritional value. The results suggest that optimizing the MP level is crucial to achieve nutritional enhancement while maintaining desirable texture and sensory attributes. An addition of 2% MP can strike a balance between nutrition and the overall quality of the final product.

Microbiological Quality Assessment of Some Commercially Available Breads

Bread is a staple, energy-rich food for people of all ages, so quality is important to consumers. In our region, most of the commercially available bread, whether packaged or unpackaged, is produced by local bakeries, so monitoring microbial levels and the types of microbes present on bread can help to draw attention to protect the final product. It can also help to ensure the food safety, quality, and shelf life of bread. The freshly baked product is microbiologically sterile. Post-process contamination affects the microbial load of bread. In this study, the microbial load of 30 different commercial bread crumbs and crusts was determined. The different types of bread with different compositions were analyzed for total viable bacteria, Escherichia coli, Staphylococcus aureus, aerobic and anaerobic spore-forming bacteria, and culturable microscopic fungi. The K-means clustering algorithm was used to cluster the different types of bread based on the number of aerobic mesophilic bacteria. Significant differences (p < 0.05) were found in the total viable bacterial count for bread crusts and crumbs. The bacterial count of bread varied between 10.00 ± 0.00-395.00 ± 52.4 CFU/g for bread crusts and 10.00 ± 0.0-310.67 ± 94 CFU/g for bread crumbs. The results of 16S rDNA sequence analysis showed that the most frequently occurring bacterial species belonged to the genus Bacillus, but species of the genus Staphylococcus were also present. Chryseobacterium spp. predominated on multigrain bread, Marinilactobacillus spp. on rustic potato bread, and Staphylococcus warneri on sliced brown potato bread. The results contribute to a better understanding of the microbial dynamics in locally produced breads from the Eastern Carpathians of Transylvania, with the aim of improving food safety, quality control, and consumer protection.

Developmental Formulation Principles of Food Preservatives by Nanoencapsulation-Fundamentals, Application, and Challenges

The role of food additives is to preserve food by extending shelf life and limiting harmful microorganism proliferation. They prevent spoilage by enhancing the taste and safety of food by utilizing beneficial microorganisms and their antimicrobial metabolites. Current advances in food preservation and processing utilize green technology principles for green preservative formulation, enhancing nutrition and supplying essential micronutrients safely, while also improving quality, packaging, and food safety. Encapsulation is gaining attention for its potential to protect delicate materials from oxidative degradation and extend their shelf life, thereby ensuring optimal nutrient uptake. Nanoencapsulation of bioactive compounds has significantly improved the food, pharmaceutical, agriculture, and nutraceutical industries by protecting antioxidants, vitamins, minerals, and essential fatty acids by controlling release and ensuring delivery to specific sites in the human body. This emerging area is crucial for future industrial production, improving the sensory properties of foods like color, taste, and texture. Research on encapsulated bioactive compounds like bacteriocins, LAB, natamycin, polylysine, and bacteriophage is crucial for their potential antioxidant and antimicrobial activities in food applications and the food industry. This paper reviews nanomaterials used as food antimicrobial carriers, including nanoemulsions, nanoliposomes, nanoparticles, and nanofibers, to protect natural food antimicrobials from degradation and improve antimicrobial activity. This review discusses nanoencapsulation techniques for biopreservative agents like nisin, poly lysine, and natamycin, focusing on biologically-derived polymeric nanofibers, nanocarriers, nanoliposomes, and polymer-stabilized metallic nanoparticles. Nanomaterials, in general, improve the dispersibility, stability, and availability of bioactive substances, and this study discusses the controlled release of nanoencapsulated biopreservative agents.

Active Polysaccharide-Based Films Incorporated with Essential Oils for Extending the Shelf Life of Sliced Soft Bread

Active, fully biobased film-forming dispersions (FFDs) with highly promising results for sliced soft bread preservation were successfully elaborated from carboxymethyl cellulose (CMC) and chitosan (CH) using a simple method based on pH adjustments. They consisted of the association of polysaccharides and oleic acid (OL) added with cinnamon (CEO) or ginger (GEO) essential oils. The chemical compositions of the commercial essential oils were first determined via GC/MS, with less than 3% of compounds unidentified. The films obtained from FFDs were characterized by SEM, FTIR and DSC, indicating specific microstructures and some interactions between essential oils and the polymer matrix. CEO-based films exhibited higher antioxidant properties and a lower minimal inhibitory concentration in terms of antifungal properties. From experiments on sliced soft bread, the ginger-based films could increase the shelf life up to 20 days longer than that of the control. Even more promising, cinnamon-based films led to complete fungal inhibition in bread slices that was maintained beyond 60 days. Enumeration of the yeasts and molds for the FFD-coated breads revealed complete inhibition even after 15 days of storage with the FFDs containing the highest concentration of CEO.

An In Vivo Model of Propionic Acid-Rich Diet-Induced Gliosis and Neuro-Inflammation in Mice (FVB/N-Tg(GFAPGFP)14Mes/J): A Potential Link to Autism Spectrum Disorder

Evidence shows that Autism Spectrum Disorder (ASD) stems from an interplay of genetic and environmental factors, which may include propionic acid (PPA), a microbial byproduct and food preservative. We previously reported that in vitro treatment of neural stem cells with PPA leads to gliosis and neuroinflammation. In this study, mice were exposed ad libitum to a PPA-rich diet for four weeks before mating. The same diet was maintained through pregnancy and administered to the offspring after weaning. The brains of the offspring were studied at 1 and 5 months postpartum. Glial fibrillary acidic protein (astrocytic marker) was significantly increased (1.53 ± 0.56-fold at 1 M and 1.63 ± 0.49-fold at 5 M) in the PPA group brains. Tubulin IIIβ (neuronal marker) was significantly decreased in the 5 M group. IL-6 and TNF-α expression were increased in the brain of the PPA group (IL-6: 2.48 ± 1.25-fold at 5 M; TNF-α: 2.84 ± 1.16-fold at 1 M and 2.64 ± 1.42-fold, at 5 M), while IL-10 was decreased. GPR41 and p-Akt were increased, while PTEN (p-Akt inhibitor) was decreased in the PPA group. The data support the role of a PPA-rich diet in glia over-proliferation and neuro-inflammation mediated by the GPR41 receptor and PTEN/Akt pathway. These findings strongly support our earlier study on the role of PPA in ASD.

Technological and Nutritional Aspects of Bread Production: An Overview of Current Status and Future Challenges

Bakery products, especially bread, exist in many homes worldwide. One of the main reasons for its high consumption is that the main raw material is wheat, a cereal that can adapt to a wide variety of soils and climates. However, the nutritional quality of this raw material decreases during its industrial processing, decreasing the value of fibers, proteins, and minerals. Therefore, bread has become a product of high interest to increase its nutritional value. Due to the high consumption of bread, this paper provides a general description of the physicochemical and rheological changes of the dough, as well as the sensory properties of bread by incorporating alternative flours such as beans, lentils, and soy (among others). The reviewed data show that alternative flours can improve fiber, macro, and micronutrient content. The high fiber content reduces the quality of the texture of the products. However, new processing steps or cooking protocols, namely flour proportions, temperature, cooking, and fermentation time, can allow adjusting production variables and optimization to potentially overcome the decrease in sensory quality and preserve consumer acceptance.

Structure-function relationship of oat flour fractions when blended with wheat flour: Instrumental and nutritional quality characterization of resulting breads

The present work investigated the structure-function relationship of dry fractionated oat flour (DFOF) as a techno-functional ingredient using bread as a model system. Mechanically, DFOF fractions (F), that is, F1: <224 µm, F2: 250-280 µm, F3: 280-500 µm, F4: 500-600 µm, and whole oat flour (F5) were blended with white wheat flour at 10%, 30%, and 50% substitution levels for bread making. The blended flours, doughs, and bread samples were assessed for their techno-functional, nutritional, and structural characteristics. The results of Mixolab and the Rapid Visco Analyzer show that the 50% substituted F3 fraction exhibits the highest water absorption properties (69.53%), whereas the 50% F1 fraction exhibits the highest peak viscosity of the past slurry. Analysis of bread samples revealed a lower particle size of DFOF fractions and higher supplementation levels, increased β-glucan levels (0.13-1.29 g/100 bread (db), reduced fermentable monosaccharides, that is, glucose (1.44-0.33 g/100 g), and fructose (1.06-0.28 g/100 g). The effect of particle size surpassed the substitution level effect on bread volume reduction. The lowest hardness value for F1 is 10%, and the highest value for F2 is 50%. The total number of cells in the bread slice decreased from the control to the F4 fraction (50%). Multi-criteria analysis indicated that DFOF fractions produced breads with similar structure and higher nutritional value developed from white wheat flour. PRACTICAL APPLICATION: The use of mechanically fractionated oat flours fractions in white wheat flour breads can improve the nutritional profile without affecting the physical properties of the bread product. Based on the oat flour fractions, bakers and food processing companies can tailor the bread formulations for high β-glucan, high fiber, and low reduced sugar claims.

Novel chitosan-based smart bio-nanocomposite films incorporating TiO2 nanoparticles for white bread preservation

Chitosan (CS)-based bio-nanocomposite food packaging films were prepared via solvent-casting method by incorporating a unique combination of additives and fillers, including polyvinyl alcohol (PVA), glycerol, Tween 80, castor oil (CO), and nano titanium dioxide (TiO2) in various proportions to enhance film properties. For a comprehensive analysis of the synthesized films, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), tensile testing, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), and UV-vis spectrophotometry were employed. Furthermore, the antimicrobial efficacy of the films against S. aureus, E. coli, and A. niger was examined to assess their potential to preserve food from foodborne pathogens. The results claimed that the inclusion of castor oil and TiO2 nanoparticles considerably improved antimicrobial properties, UV-vis light barrier properties, thermal stability, optical transparency, and mechanical strength of the films, while reducing their water solubility, moisture content, water vapor and oxygen permeability. Based on the overall analysis, CS/PVA/CO/TiO2-0.3 film can be selected as the optimal one for practical applications. Furthermore, the practical application of the optimum film was evaluated using white bread as a model food product. The modified film successfully extended the shelf life of bread to 10 days, surpassing the performance of commercial LDPE packaging (6 days), and showed promising attributes for applications in the food packaging sector. These films exhibit superior antimicrobial properties, improved mechanical strength, and extended shelf life for food products, marking a sustainable and efficient alternative to conventional plastic packaging in both scientific research and industrial applications.

Bio-preservatives and essential oils as an alternative to chemical preservatives in the baking industry: a concurrent review

The use of chemical preservatives in the baking industry is a common practice to extend the shelf life of baked goods However, there is growing interest in natural alternatives due to worries about the security and potential health risks of these chemicals. The purpose of this concurrent review is to investigate the potential of using essential oils and bio-preservatives in place of chemical preservatives in the baking industry. With a focus on their efficiency in extending the shelf life of baked goods, the review includes a thorough analysis of the most recent research on the use of bio-preservatives and essential oils in food preservation. The findings suggest that bio-preservatives and essential oils can be effective in preserving baked goods and may offer a safer and more natural alternative to chemical preservatives. However, further research is needed to fully understand the potential of these natural alternatives and to optimize their use in the baking industry.

Allium sativum L. var. Voghiera Reduces Aflatoxin B1 Bioaccessibility and Cytotoxicity In Vitro

The present work focuses on the evaluation of AFB1's bioaccessibility and cytotoxicity in vitro using bread (naturally contaminated) enriched or not enriched with fresh Voghiera garlic (2%). Two different experiments were carried out: experiment 1 (E1), with low-AFB1-concentration breads (1.6-1.7 mg/kg); and experiment 2 (E2), with high-AFB1-concentration breads (96.4-102.7 mg/kg). Eight breads were prepared, four for E1 (experiment 1) and another four for E2 (experiment 2), with each experiment having a control group (C), a garlic-enriched group (2%) (G), an AFB1 group (A), and an AFB1 + garlic group (A + G). Simulated digestion was performed on each type of bread, and gastric and intestinal digests were obtained. AFB1 content in flours, baked bread, and gastric and intestinal digests was measured by High-Performance Liquid Chromatography coupled to Fluorescence Detection. The results demonstrate dose-dependent AFB1 bioaccessibility and that the presence of garlic contributed to its reduction in both doses (7-8%). Moreover, garlic's presence in AFB1-contaminated bread increased cell viability (9-18%) in differentiated Caco-2 cells and mitigated the arrest of S and G2/M phases provoked by AFB1 on Jurkat T cells and reduced apoptosis/necrosis, cellular reactive oxygen species (ROS), and mitochondrial ROS by 16%, 71%, and 24% respectively. The inclusion of garlic as a functional ingredient helped relieve the presence and effects of AFB1.

Effects of Wheat Oligopeptide on the Baking and Retrogradation Properties of Bread Rolls: Evaluation of Crumb Hardness, Moisture Content, and Starch Crystallization

Delaying the deterioration of bakery goods is necessary in the food industry. The objective of this study was to determine the effects of wheat oligopeptide (WOP) on the qualities of bread rolls. The effects of WOP on the baking properties, moisture content, and starch crystallization of rolls during the storage process were investigated in this study. The results showed that WOP effectively improved the degree of gluten cross-linking, thereby improving the specific volume and the internal structure of rolls. The FTIR and XRD results showed that the addition of WOP hindered the formation of the starch double helix structure and decreased its relative crystallinity. The DSC results revealed a decrease in the enthalpy change (ΔH) from 0.812 to 0.608 J/g after 7 days of storage with 1.0% WOP addition, further indicating that WOP reduced the availability of water for crystal lattice formation and hindered the rearrangement of starch molecules. The addition of WOP also improved the microstructure of the rolls that were observed using SEM analysis. In summary, WOP is expected to be an effective natural additive to inhibit starch staling and provide new insights into starchy food products.

Diversity of Microorganisms and Their Metabolites in Food

Throughout history as well as the present, food microorganisms have been proven to play a significant role in human life [...].

Innovative Biobased and Sustainable Polymer Packaging Solutions for Extending Bread Shelf Life: A Review

Sustainable packaging has been steadily gaining prominence within the food industry, with biobased materials emerging as a promising substitute for conventional petroleum-derived plastics. This review is dedicated to the examination of innovative biobased materials in the context of bread packaging. It aims to furnish a comprehensive survey of recent discoveries, fundamental properties, and potential applications. Commencing with an examination of the challenges posed by various bread types and the imperative of extending shelf life, the review underscores the beneficial role of biopolymers as internal coatings or external layers in preserving product freshness while upholding structural integrity. Furthermore, the introduction of biocomposites, resulting from the amalgamation of biopolymers with active biomolecules, fortifies barrier properties, thus shielding bread from moisture, oxygen, and external influences. The review also addresses the associated challenges and opportunities in utilizing biobased materials for bread packaging, accentuating the ongoing requirement for research and innovation to create advanced materials that ensure product integrity while diminishing the environmental footprint.

Proteomics as a New-Generation Tool for Studying Moulds Related to Food Safety and Quality

Mould development in foodstuffs is linked to both spoilage and the production of mycotoxins, provoking food quality and food safety concerns, respectively. The high-throughput technology proteomics applied to foodborne moulds is of great interest to address such issues. This review presents proteomics approaches useful for boosting strategies to minimise the mould spoilage and the hazard related to mycotoxins in food. Metaproteomics seems to be the most effective method for mould identification despite the current problems related to the bioinformatics tool. More interestingly, different high resolution mass spectrometry tools are suitable for evaluating the proteome of foodborne moulds able to unveil the mould's response under certain environmental conditions and the presence of biocontrol agents or antifungals, being sometimes combined with a method with limited ability to separate proteins, the two-dimensional gel electrophoresis. However, the matrix complexity, the high ranges of protein concentrations needed and the performing of multiple steps are some of the proteomics limitations for the application to foodborne moulds. To overcome some of these limitations, model systems have been developed and proteomics applied to other scientific fields, such as library-free data independent acquisition analyses, the implementation of ion mobility, and the evaluation of post-translational modifications, are expected to be gradually implemented in this field for avoiding undesirable moulds in foodstuffs.

Food grade nanoemulsion development to control food spoilage microorganisms on bread surface

In this study, the effect of emulsifier mixture and their concentrations on the development of nanoemulsion was studied. The impact of sonication and microfluidization processing conditions on the physicochemical properties and in vitro antimicrobial activity was also evaluated. The optimal nanoemulsion formulation was then evaluated on bread surface against B. subtilis. Results showed that a hydrophilic-lipophilic balance HLB = 12 and emulsifier: oil ratio of 1:1 allowed the formation of stable nanoemulsion. Also, both microfluidization and sonication allowed the formation of nanoscale-emulsion. Sonication treatment for 10 min allowed a maintain the total flavonoid content and a slight reduction of total phenol content. Furthermore, employing sonication resulted to the lowest polydispersity index suggesting more stable nanoemulsion. Nanoscale-emulsion showed a good in vitro antimicrobial activity against L. monocytogenes and E. coli. The application of nanoemulsion on bread surface inoculated with B. subtilis showed a delay of the decay.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05660-5.

The Influence of Selected Food Safety Practices of Consumers on Food Waste Due to Its Spoilage

Food waste in households is a consequence of the accumulation of improper practices employed by consumers when dealing with food. The survey estimated the impact of practices of Polish respondents, in the context of selected food safety and hygiene issues, on throwing away food due to spoilage. The survey was conducted in 2019, in a random quota-based, nationwide sample of 1115 respondents 18 years old and older. Synthetic indicators (SI) were created to assess the knowledge and practices of Polish adult respondents concerning selected areas of food management and the frequency of throwing food away. Most food products were not thrown away at all or were thrown away occasionally. Regression analysis revealed that the frequency of throwing food away was to the greatest extent related to food spoilage (β = 0.223). Among the five areas of Polish respondents’ practices covered by the analysis, the most conducive to wasting food due to spoilage were improper proceedings with food after bringing it home (β = 0.135; p = 0.000), a failure to ensure proper food storage conditions (β = 0.066; p = 0.030), or inappropriate proceedings with uneaten meals, excluding the food plate (β = 0.066; p = 0.029). To reduce food waste in Polish households, drawing the attention of consumers to the conditions of food storage at home seems appropriate. It is also vital to convince them to use freezing of uneaten food as an effective method of extending the life of food products.

16S rRNA Based Profiling of Bacterial Communities Colonizing Bakery-Production Environments

Conventional culture-based techniques are largely inadequate in elucidating the microbiota contained in an environment, due to low recovery within a complex bacterial community. This limitation has been mitigated by the use of next-generation sequencing (NGS)-based approaches thereby facilitating the identification and classification of both culturable and uncultivable microorganisms. Amplicon targeted NGS methods, such as 16S ribosomal RNA (16S rRNA) and shotgun metagenomics, are increasingly being applied in various settings such as in food production environments to decipher the microbial consortium therein. Even though multiple food matrices/food production environments have been studied, the low-moisture environment associated with bakery food production remains to be investigated. To address this knowledge gap, in this study, we investigated the microbiome associated with two bakery production sites (designated as A and B) located in Ireland using 16S rRNA-amplicon-based sequencing. Amplicons corresponding to a hypervariable region contained within the 16S rRNA gene were amplified from DNA samples purified from environmental swabs and ingredients collected at both sites at various stages (preparation, production, postproduction, and storage) across the bakery production chain, over three seasons (winter, spring, and summer). These amplicons were sequenced, and data were analyzed using the mothur pipeline and visualized using MicrobiomeAnalyst and a series of R packages. The top seven bacterial phyla identified at both sites were composed of Proteobacteria, Firmicutes, Actinobacteria, Bacteroidetes, Deinococcus-Thermus, Patescibacteria, and Verrucomicrobia. In addition, the phyla Tenericutes (Mycoplasmatota) and Acidobacteria were observed only in samples taken at site B. Different bacterial compositions were identified at each stage of production. These same bacteria were also found to be present in the final processed food suggesting the influence of the environment on the food matrix. This study is the first demonstration of the utility of 16S rRNA amplicon-based sequencing to describe the microbiota associated with bakery processing environments.

Effect of Dough-Related Parameters on the Antimold Activity of Wickerhamomyces anomalus Strains and Mold-Free Shelf Life of Bread

The aim of the present study was to assess the antimold capacity of three Wickerhamomyces anomalus strains, both in vitro and in situ, and to identify the responsible volatile organic compounds. For that purpose, two substrates were applied; the former included brain heart infusion broth, adjusted to six initial pH values (3.5, 4.0, 4.5, 5.0, 5.5, 6.0) and supplemented with six different NaCl concentrations (0.0%, 0.5%, 1.0%, 1.5%, 2.0%, 2.5%), while the latter was a liquid dough, fortified with the six aforementioned NaCl concentrations. After a 24 h incubation at 30 °C, the maximum antimold activity was quantified for all strains at 5120 AU/mL, obtained under different combinations of initial pH value and NaCl concentration. A total of twelve volatile compounds were detected; ethanol, ethyl acetate, isoamyl alcohol and isoamyl acetate were produced by all strains. On the contrary, butanoic acid-ethyl ester, acetic acid-butyl ester, ethyl caprylate, 3-methyl-butanoic acid, 2,4-di-tert-butyl-phenol, benzaldehyde, nonanal and octanal were occasionally produced. All compounds exhibited antimold activity; the lower MIC was observed for 2,4-di-tert-butyl-phenol and benzaldehyde (0.04 and 0.06 μL/mL of headspace, respectively), while the higher MIC was observed for butanoic acid-ethyl ester and ethyl caprylate (5.14 and 6.24 μL/mL of headspace, respectively). The experimental breads made with W. anomalus strains LQC 10353, 10346 and 10360 gained an additional period of 9, 10 and 30 days of mold-free shelf life, compared to the control made by commercially available baker’s yeast. Co-culture of the W. anomalus strains with baker’s yeast did not alter the shelf-life extension, indicating the suitability of these strains as adjunct cultures.