Exposure to Heavy Metals in Electronic Waste Recycling in Thailand

Systematic literature review of heavy metal contamination of the Nigerian environment from e-waste management: Associated health and carcinogenic risk assessment

E-waste -the aftermath of large amount of electrical and electronic equipment ferried into Africa from which Nigeria receives a significant chunk, is composed of components known to be hazardous to health. Composition of series of heavy metals (HMs) in e-waste is traceable to many health conditions including cancer which is hitherto incompletely understood. This study harmonizes primary data on HMs from e-waste in different Nigerian environmental media including the air, soil, surface dust, water and plant. We estimated the possible health implications, single and aggregative soil and water pollution indices both in adult and children categories, carcinogenic and non-carcinogenic risks secondary to HM exposure and mapped out the possible mechanism of carcinogenesis. Analysis showed that soil, water, surface dust and plant matrices in Nigerian environment are variedly but considerably contaminated with combination of HMs. The significantly high values of the hazard quotient and hazard index of both water and surface dust matrices are indicative of adverse health effect of the non-carcinogenic risk. The highest HQ is generated by Pb and Cr through dermal exposure to soil and surface dust with mean values of 1718.48, 1146.14, 1362.10 and 1794.61 respectively among Nigerian children followed by the oral exposure. This pattern of observation is similar to that obtained for adult category. HI due to Pb and Cr in soil constitutes the highest HI (2.05E+03 and 1.18E+03 respectively) followed by surface dust. However, this study precipitates the observation that children are more at health risk than adults in contaminated environment. Carcinogenic risk also follows the same pattern of expression in the Nigerian environment. We conclude that exposure to e-waste poses significant carcinogenic and non-carcinogenic health risks and the induction of toxicity may be mediated via DNA damage, oxidative stress and inflammatory/immune cells dysfunction in Nigerian environment.

Bridging the knowledge gap! Health outcomes in informal e-waste workers

BACKGROUND

Although several studies analyzed the impact of e-waste recycling on human health, most publications did not differ between e-waste workers and bystanders, such as residents. This could lead to an underestimation of health effects in workers. In addition, frequently reported surrogate findings do not properly reflect clinical significant health outcomes. The aim of this review was to analyze the direct health effects of informal e-waste recycling in informal e-waste workers.

METHODS

According to PRISMA guidelines, we systematically searched 3 databases (Embase®, PubMed®, Web of Science) for studies from low- and middle-income countries published in German or English between 1980 and 1 November 2021. Of the 2613 hits, 26 studies (cross-sectional, longitudinal and case-control studies) met the specified criteria and were included. We categorized the results into hormonal, respiratory, renal, cardiovascular, musculoskeletal health and general symptoms in informal e-waste workers.

RESULTS

Exposure to e-waste was associated with altered lipid metabolism, thyroid hormonal imbalances, impaired fertility, renal dysfunction, increased prevalence of respiratory symptoms, asthma, cardiac arrhythmias, hypertension, musculoskeletal pain, injuries in up to 89% and skin disorders in up to 87.5-100% of e-waste workers.

CONCLUSION

Due to inconsistent findings, weak associations or poor study quality, it has rarely been possible to establish a causal relationship between informal e-waste work and health effects, except for injuries or skin conditions. Besides high-quality studies, a collective national and international political focus on e-waste disposal is needed.

Health Risk Assessment of Heavy Metals in Indoor Household Dust in Urban and Rural Areas of Chiang Mai and Lamphun Provinces, Thailand

Indoor exposure to heavy metals poses human health risks worldwide, but study reports from Thailand are still limited, particularly in rural and urban areas. We measured the heavy metals in a hundred indoor household dust samples collected from urban and rural areas in Chiang Mai and Lamphun provinces and found a significantly higher concentration of As in rural areas and Cd in urban areas with industrial activities. The source identification of the heavy metals showed significant enrichment from traffic emissions, paint, smoking, and mixed sources with natural soil. From health risk assessment models, children were more vulnerable to noncarcinogenic risks (HI = 1.45), primarily via ingestion (HQ = 1.39). Lifetime cancer risks (LCRs) due to heavy metal exposure were found in adults (LCR = 5.31 × 10-4) and children (LCR = 9.05 × 10-4). The cancer risks from As were higher in rural areas via ingestion, while Cr and Ni were higher in urban areas via inhalation and ingestion, respectively. This study estimated that approximately 5 out of 10,000 adults and 9 out of 10,000 children among the population may develop cancer in their lifetime from exposure to indoor heavy metals in this region.

Resource Recycling, Recovery, and Xenobiotic Remediation from E-wastes Through Biofilm Technology: A Review

Around 50 million tonnes of electronic waste has been generated globally per year, causing an environmental hazard and negative effects on human health, such as infertility and thyroid disorders in adults, endocrine and neurological damage in both animals and humans, and impaired mental and physical development in children. Out of that, only 15% is recycled each year and the remaining is disposed of in a landfill, illegally traded or burned, and treated in a sub-standard way. The processes of recycling are challenged by the presence of brominated flame retardants. The different recycling technologies such as the chemical and mechanical methods have been well studied, while the most promising approach is the biological method. The process of utilizing microbes to decontaminate and degrade a wide range of pollutants into harmless products is known as bioremediation and it is an eco-friendly, cost-effective, and sustainable method. The bioremediation process is significantly aided by biofilm communities attached to electronic waste because they promote substrate bioavailability, metabolite transfer, and cell viability, all of which accelerate bioleaching and biodegradation. Microbes existing in biofilm mode relatable to free-floating planktonic cells are advantageous of bioremediation due to their tolerant ability to environmental stress and pollutants through diverse catabolic pathways. This article discusses the harmful effects of electronic waste and its management using biological strategies especially biofilm-forming communities for resource recovery.

Size-resolved characterization of particles >10 nm emitted to air during metal recycling

BACKGROUND

In the strive towards a circular economy, metal waste recycling is a growing industry. During the recycling process, particulate matter containing toxic and allergenic metals will be emitted to the air causing unintentional exposure to humans and environment.

OBJECTIVE

In this study detailed characterization of particle emissions and workplace exposures were performed, covering the full size range from 10 nm to 10 µm, during recycling of three different material flows: Waste of electrical and electronic equipment (WEEE), metal scrap, and cables.

METHODS

Both direct-reading instruments (minute resolution), and time-integrated filter measurements for gravimetric and chemical analysis were used. Additionally, optical sensors were applied and evaluated for long-term online monitoring of air quality in industrial settings.

RESULTS

The highest concentrations, in all particle sizes, and with respect both to particle mass and number, were measured in the WEEE flow, followed by the metal scrap flow. The number fraction of nanoparticles was high for all material flows (0.66-0.86). The most abundant metals were Fe, Al, Zn, Pb and Cu. Other elements of toxicological interest were Mn, Ba and Co.

SIGNIFICANCE

The large fraction of nanoparticles, and the fact that their chemical composition deviate from that of the coarse particles, raises questions that needs to be further addressed including toxicological implications, both for humans and for the environment.

E-waste management, treatment options and the impact of heavy metal extraction from e-waste on human health: Scenario in Vietnam and other countries

Ho Chi Minh (HCM) City is the most important urban region of Vietnam, Southeast Asia. In recent times, the quantity of electronic waste (e-waste) has been growing by several thousand tonnes every year. In this research, some of the existing and developing technologies being employed for the recycling of e-waste have been reviewed. Accordingly, the paper has been divided into three sections namely, e-waste treatment technologies in Ho Chi Minh City, the effect of heavy metals on human health and the extraction of metals from e-waste using pyrolysis, hydrometallurgy, bioleaching, mechanical, and air classifier methods, respectively. The extraction of precious metals and heavy metals such as Cd, Cr, Pb, Hg, Cu, Se, and Zn from e-waste can be hazardous to human health. For example, lead causes hazards to the central and peripheral nervous systems, blood system and kidneys; copper causes liver damage; chronic exposure to cadmium ends up causing lung cancer and kidney damage, and mercury can cause brain damage. Thus, this study examines the key findings of many research and review articles published in the field of e-waste management and the health impacts of metal pollution.

Systematic Review and Meta-Analysis of Mercury Exposure among Populations and Environments in Contact with Electronic Waste

Electronic waste (e-waste) recycling releases mercury (Hg) into the environment, though to our knowledge Hg levels at such sites have yet to be examined on a worldwide basis. A systematic review of scientific studies was conducted to extract, analyze, and synthesize data on Hg levels in e-waste products, environments near recycling sites, and in people. Data were extracted from 78 studies from 20 countries, and these included Hg levels in 1103 electrical and electronic products, 2072 environmental samples (soil, air, plant, food, water, dust), and 2330 human biomarkers (blood, hair, urine). The average Hg level in products was 0.65 μg/g, with the highest levels found in lamps (578 μg/g). Average soil and sediment Hg levels (1.86 μg/g) at e-waste sites were at least eight times higher than at control sites. Average urinary Hg levels (0.93 μg/g creatinine) were approximately two-fold higher among e-waste workers versus control groups. Collectively, these findings demonstrate that e-waste recycling may lead to Hg contamination in environments and human populations in close proximity to processing sites. These findings contribute to a growing knowledge base of mercury exposure through diverse source-exposure pathways, and the work has potential policy implications in the context of the Minamata Convention.

E-WASTE threatens health: The scientific solution adopts the one health strategy

The aggressively extractive advanced technology industry thrives on intensive use of non-renewable resources and hyper-consumeristic culture. The environmental impact of its exponential growth means extreme mining, hazardous labour practices including child labour, and exposure burden to inorganic and organic hazardous chemicals for the environment and current and future human generations. Globally, processes such as in-country reduce, reuse and recycle have so far received less attention than outer-circle strategies like the uncontrolled dumping of e-waste in countries that are unprotected by regulatory frameworks. Here, in the absence of infrastructures for sound hazardous e-waste management, the crude recycling, open burning and dumping into landfills of e-waste severely expose people, animal and the environment. Along with economic, political, social, and cultural solutions to the e-waste global problem, the scientific approach based on risk analysis encompassing risk assessment, risk management and risk communication can foster a technical support to resist transgenerational e-waste exposure and health inequalities. This paper presents the latest public health strategies based on the use of integrated human and animal biomonitoring and appropriate biomarkers to assess and manage the risk of e-waste embracing the One Health approach. Advantages and challenges of integrated biomonitoring are described, along with ad-hoc biomarkers of exposure, effect and susceptibility with special focus on metals and metalloids. Indeed, the safe and sustainable management of novel technologies will benefit of the integration and coordination of human and animal biomonitoring.

E-waste dismantling as a source of personal exposure and environmental release of fine and ultrafine particles

Electronic waste (WEEE; from TV screens to electric toothbrushes) is one of the fastest growing waste streams in the world. Prior to recycling, e-waste components (metals, wood, glass, etc.) are processed by shredding, grinding and chainsaw cutting. These activities generate fine and ultrafine particle emissions, containing metals as well as organics (e.g., flame retardants), which have high potential for human health impacts as well as for environmental release. In this work, release of fine and ultrafine particles, and their exposure impacts, was assessed in an e-waste recycling facility under real-world operating conditions. Parameters monitored were black carbon, particle mass concentrations, ultrafine particles, and aerosol morphology and chemical composition. Potential health impacts were assessed in terms of cytotoxicity (cell viability) and oxidative stress (ROS) on <2 μm particles collected in liquid suspension. Environmental release of WEEE aerosols was evidenced by the higher particle concentrations monitored outside the facility when compared to the urban background (43 vs.11 μgPM2.5/m³, respectively, or 2.4 vs. 0.2 μgCa/m³). Inside the facility, concentrations were higher in the top than on the ground floor (PM2.5 = 147 vs. 78 μg/m³, N = 15.4 ∗ 104 vs. 8.7 ∗ 104/cm³, BC = 12.4 vs. 7.2 μg/m³). Ventilation was a key driver of human exposure, in combination with particle emissions. Key chemical tracers were Ca (from plastic fillers) and Fe (from wiring and other metal components). Y, Zr, Cd, Pb, P and Bi were markers of cathode TV recycling, and Li and Cr of grinding activities. While aerosols did not evidence cytotoxic effects, ROS generation was detected in 4 out of the 12 samples collected, associated to the ultrafine fraction. We conclude on the need for studies on aerosol emissions from WEEE facilities, especially in Europe, due to their demonstrable environmental and human health impacts and the rapidly growing generation of this type of waste.

Occupational exposure to metals among battery recyclers in France: Biomonitoring and external dose measurements

In battery-recycling facilities, exposure to trace elements may occur through inhalation of contaminated dust or vapor emanating from the treatment processes. Exposure of battery-recycling workers to lead has been quite well covered in the literature. In contrast, we lack data on exposure to other elements contained in batteries. The aim of this study was to characterize the exposure of French battery recyclers to multiple elements using biomonitoring and airborne measurements. Eighty-six workers participated in the study. Inhalable metal concentrations were determined for personal airborne samples, and total exposure was determined from pre-shift and post-shift urine samples collected during the working week. In both types of sample, a total of 33 trace elements were measured using inductively coupled plasma mass spectrometry. Results showed battery recyclers to be mostly exposed to Cd, Co, Cr, Li, Mn, Ni, and Pb. Administrative and sorting workers were exposed at lower levels than maintenance, treatment, and dismantling workers. Cd, Co, Li, Mn, and Ni were detected at high levels in air samples, especially near the treatment facilities, with airborne cadmium levels of up to 79.4 µg/m³. Urinary sample analysis indicated exposure to Cd and Co, with levels measured at up to 27.6 and 3.34 µg/g of creatinine, respectively. Concentrations were compared to data reported for e-waste recycling companies. The data presented provide valuable information on exposure to trace elements for workers involved in battery-recycling. They also highlight the need to improve both collective and individual protective measures, which were not sufficient in the participating companies.

Deciphering the origin and controlling factors of mercury in reclaimed soils: a case study in Pingshuo opencast coalmine of China

Considering the significant influence of mercury (Hg) contamination on the land reclamation inopencast coalmine, the spatial distribution patterns and ecological risks of Hg were investigated and the regulating factors of Hg mobility were determined in the South Dump of the Pingshuo opencast coalmine. The results show that the total Hg (HgT) contents of most soil samples (83.7%) vary from 6 to 50 μg kg^-1, while the potential ecological risk index (EI_Hg) values of most samples (79.8%) are lower than 80, indicating that most reclaimed soils are in relatively good conditions and the soil samples at high to very high ecological risk are mainly collected near the backfilled coal gangue. Moreover, the kriging maps of the geo-accumulation index (I_geo) indicate that the uncontaminated areas (I_geo < 0) and Hg-contaminated areas (I_geo > 0) in topsoil (0-10 cm) are roughly divided by an "east-west arc" while the Hg-contaminated areas in other soil horizons are characterized by a "point distribution pattern". The slight Hg contamination in topsoil is mainly triggered by the atmospheric Hg deposition from the nearby coal-fired power plant, while the Hg contamination in other soil horizons should be attributed to the weathering and spontaneous combustion of coal gangue. On the other hand, Pearson's correlation analyses show that HgT contents were positively correlated with clay (r = 0.31, P < 0.01) and SOC (r = 0.53, P < 0.01) contents. This study can provide some insight for the land reclamation measures in the opencast coalmine.