Generation of Organized Porcine Testicular Organoids in Solubilized Hydrogels from Decellularized Extracellular Matrix

Bioengineering toolkits for potentiating organoid therapeutics

Organoids are three-dimensional, multicellular constructs that recapitulate the structural and functional features of specific organs. Because of these characteristics, organoids have been widely applied in biomedical research in recent decades. Remarkable advancements in organoid technology have positioned them as promising candidates for regenerative medicine. However, current organoids still have limitations, such as the absence of internal vasculature, limited functionality, and a small size that is not commensurate with that of actual organs. These limitations hinder their survival and regenerative effects after transplantation. Another significant concern is the reliance on mouse tumor-derived matrix in organoid culture, which is unsuitable for clinical translation due to its tumor origin and safety issues. Therefore, our aim is to describe engineering strategies and alternative biocompatible materials that can facilitate the practical applications of organoids in regenerative medicine. Furthermore, we highlight meaningful progress in organoid transplantation, with a particular emphasis on the functional restoration of various organs.

Advancing Organoid Engineering for Tissue Regeneration and Biofunctional Reconstruction

Tissue damage and functional abnormalities in organs have become a considerable clinical challenge. Organoids are often applied as disease models and in drug discovery and screening. Indeed, several studies have shown that organoids are an important strategy for achieving tissue repair and biofunction reconstruction. In contrast to established stem cell therapies, organoids have high clinical relevance. However, conventional approaches have limited the application of organoids in clinical regenerative medicine. Engineered organoids might have the capacity to overcome these challenges. Bioengineering-a multidisciplinary field that applies engineering principles to biomedicine-has bridged the gap between engineering and medicine to promote human health. More specifically, bioengineering principles have been applied to organoids to accelerate their clinical translation. In this review, beginning with the basic concepts of organoids, we describe strategies for cultivating engineered organoids and discuss the multiple engineering modes to create conditions for breakthroughs in organoid research. Subsequently, studies on the application of engineered organoids in biofunction reconstruction and tissue repair are presented. Finally, we highlight the limitations and challenges hindering the utilization of engineered organoids in clinical applications. Future research will focus on cultivating engineered organoids using advanced bioengineering tools for personalized tissue repair and biofunction reconstruction.

Anin vitrothree-dimensional (3D) testicular organoid culture system for efficient gonocyte maintenance and propagation using frozen/thawed neonatal bovine testicular tissues

Fertility preservation in prepubertal boys with cancer requires the cryopreservation of immature testicular tissues (ITTs) prior to gonadotoxic treatment. However, the limited number of germ cells in small human ITT biopsies necessitates the development of anin vitroculture system for germ cell expansion using frozen-thawed ITTs. Here, we generated testicular organoids for thein vitromaintenance and expansion of gonocytes from frozen-thawed two-week-old neonatal bovine ITTs. We investigated the effects of different cell-seeding densities, culture serums, seeding methods, and gonadotropin supplementations, on the maintenance and proliferation of enriched gonocytes. Our results demonstrated that enriched gonocytes and testicular cells from frozen-thawed neonatal ITTs could self-assemble into spheroid organoids in three days in an appropriate Matrigel-based culture environment. For the optimal formation of prepubertal testicular organoids, a seeding density of 1 × 106cells/well is recommended over other densities. This strategy results in organoids with a mean diameter of 60.53 ± 12.12 μm; the mean number of organoids was 5.57 ± 1.60/105μm2on day 11. The viability of organoids was maintained at 79.75 ± 2.99% after being frozen and thawed. Supplementing the culture medium with glial cell-derived neurotrophic factor, fibroblast growth factor 2, and leukemia inhibitory factor, increased the proportion of KI67-positive proliferating cells in organoids, elevated the expression ofC-KITbut reduced the expression ofGFRα1at day 28 when compared to those without hormone supplements(p< 0.05). In addition, supplementing the culture medium with follicle-stimulating hormone and testosterone helped to maintain a significantly higher viability (p< 0.05) in ITT organoids at day 28. These organoids could be cryopreserved for storage and thawed as needed. The successful generation of ITT organoids provides a valuable tool for establishingin vitrospermatogenesis, propagating human germ cells, investigating testicular physiology and the origin of germ cell tumors, and testing the toxicity of new drugs in future clinical applications.

Bovine adipose tissue-derived mesenchymal stem cells self-assemble with testicular cells and integrates and modifies the structure of a testicular organoids

Mesenchymal stem cells (MSC) display self-renewal and mesodermal differentiation potentials. These characteristics make them potentially useful for in vitro derivation of gametes, which may constitute experimental therapies for human and animal reproduction. Organoids provide a spatial support and may simulate a cellular niche for in vitro studies. In this study, we aimed at evaluating the potential integration of fetal bovine MSCs derived from adipose tissue (AT-MSCs) in testicular organoids (TOs), their spatial distribution with testicular cells during TO formation and their potential for germ cell differentiation. TOs were developed using Leydig, Sertoli, and peritubular myoid cells that were previously isolated from bovine testes (n = 6). Thereafter, TOs were characterized using immunofluorescence and Q-PCR to detect testicular cell-specific markers. AT-MSCs were labeled with PKH26 and then cultured with testicular cells at a concentration of 1 × 106 cells per well in Ultra Low Attachment U-shape bottom (ULA) plates. TOs formed by testicular cells and AT-MSCs (TOs + AT-MSCs) maintained a rounded structure throughout the 28-day culture period and did not show significant differences in their diameters. Conversely, control TOs exhibited a compact structure until day 7 of culture, while on day 28 they displayed cellular extensions around their structure. Control TOs had greater (P < 0.05) diameters compared to TOs + AT-MSCs. AT-MSCs induced an increase in proportion of Leydig and peritubular myoid cells in TOs + AT-MSCs; however, did not induce changes in the overall gene expression of testicular cell-specific markers. STAR immunolabelling detected Leydig cells that migrated from the central area to the periphery and formed brunches in control TOs. However, in TOs + AT-MSCs, Leydig cells formed a compact peripheral layer. Sertoli cells immunodetected using WT1 marker were observed within the central area forming clusters of cells in TOs + AT-MSCs. The expression of COL1A associated to peritubular myoids cells was restricted to the central region in TOs + AT-MSCs. Thus, during a 28-day culture period, fetal bovine AT-MSCs integrated and modified the structure of the TOs, by restricting formation of branches, limiting the overall increase in diameters and increasing the proportions of Leydig and peritubular myoid cells. AT-MSCs also induced a reorganization of testicular cells, changing their distribution and particularly the location of Leydig cells.

Optimized Recovery of Immature Germ Cells after Prepubertal Testicular Tissue Digestion and Multi-Step Differential Plating: A Step towards Fertility Restoration with Cancer-Cell-Contaminated Tissue

Undifferentiated germ cells, including the spermatogonial stem cell subpopulation required for fertility restoration using human immature testicular tissue (ITT), are difficult to recover as they do not easily adhere to plastics. Due to the scarcity of human ITT for research, we used neonatal porcine ITT. Strategies for maximizing germ cell recovery, including a comparison of two enzymatic digestion protocols (P1 and P2) of ITT fragment sizes (4 mm3 and 8 mm3) and multi-step differential plating were explored. Cellular viability and yield, as well as numbers and proportions of DDX4+ germ cells, were assessed before incubating the cell suspensions overnight on uncoated plastics. Adherent cells were processed for immunocytochemistry (ICC) and floating cells were further incubated for three days on Poly-D-Lysine-coated plastics. Germ cell yield and cell types using ICC for SOX9, DDX4, ACTA2 and CYP19A1 were assessed at each step of the multi-step differential plating. Directly after digestion, cell suspensions contained >92% viable cells and 4.51% DDX4+ germ cells. Pooled results for fragment sizes revealed that the majority of DDX4+ cells adhere to uncoated plastics (P1; 82.36% vs. P2; 58.24%). Further incubation on Poly-D-Lysine-coated plastics increased germ cell recovery (4.80 ± 11.32 vs. 1.90 ± 2.07 DDX4+ germ cells/mm2, respectively for P1 and P2). The total proportion of DDX4+ germ cells after the complete multi-step differential plating was 3.12%. These results highlight a reduced proportion and number of germ cells lost when compared to data reported with other methods, suggesting that multi-step differential plating should be considered for optimization of immature germ cell recovery. While Poly-D-Lysine-coating increased the proportions of recovered germ cells by 16.18% (P1) and 28.98% (P2), future studies should now focus on less cell stress-inducing enzymatic digestion protocols to maximize the chances of fertility restoration with low amounts of cryo-banked human ITT.

In vitro spermatogenesis in artificial testis: current knowledge and clinical implications for male infertility

Men's reproductive health exclusively depends on the appropriate maturation of certain germ cells known as sperm. Certain illnesses, such as Klinefelter syndrome, cryptorchidism, and syndrome of androgen insensitivity or absence of testis maturation in men, resulting in the loss of germ cells and the removal of essential genes on the Y chromosome, can cause non-obstructive azoospermia. According to laboratory research, preserving, proliferating, differentiating, and transplanting spermatogonial stem cells or testicular tissue could be future methods for preserving the fertility of children with cancer and men with azoospermia. Therefore, new advances in stem cell research may lead to promising therapies for treating male infertility. The rate of progression and breakthrough in the area of in vitro spermatogenesis is lower than that of SSC transplantation, but newer methods are also being developed. In this regard, tissue and cell culture, supplements, and 3D scaffolds have opened new horizons in the differentiation of stem cells in vitro, which could improve the outcomes of male infertility. Various 3D methods have been developed to produce cellular aggregates and mimic the organization and function of the testis. The production of an artificial reproductive organ that supports SSCs differentiation will certainly be a main step in male infertility treatment.

Preservation of fertility in female and male prepubertal patients diagnosed with cancer

Over the past two decades, the importance of fertility preservation has grown not only in the realm of medical and clinical patient care, but also in the field of basic and applied research in human reproduction. With advancements in cancer treatments resulting in higher rates of patient survival, it is crucial to consider the quality of life post-cure. Therefore, fertility preservation must be taken into account prior to antitumor treatments, as it can significantly impact a patient's future fertility. For postpubertal patients, gamete cryopreservation is the most commonly employed preservation strategy. However, for prepubertal patients, the situation is more intricate. Presently, ovarian tissue cryopreservation is the standard practice for prepubertal girls, but further scientific evidence is required in several aspects. Testicular tissue cryopreservation, on the other hand, is still experimental for prepubertal boys. The primary aim of this review is to address the strategies available for possible fertility preservation in prepubertal girls and boys, such as ovarian cryopreservation/transplantation, in vitro follicle culture and meiotic maturation, artificial ovary, transplantation of cryopreserved spermatogonia, and cryopreservation/grafting of immature testicular tissue and testicular organoids.

New Solutions for Old Problems: How Reproductive Tissue Engineering Has Been Revolutionizing Reproductive Medicine

Acquired disorders and congenital defects of the male and female reproductive systems can have profound impacts on patients, causing sexual and endocrine dysfunction and infertility, as well as psychosocial consequences that affect their self-esteem, identity, sexuality, and relationships. Reproductive tissue engineering (REPROTEN) is a promising approach to restore fertility and improve the quality of life of patients with reproductive disorders by developing, replacing, or regenerating cells, tissues, and organs from the reproductive and urinary systems. In this review, we explore the latest advancements in REPROTEN techniques and their applications for addressing degenerative conditions in male and female reproductive organs. We discuss current research and clinical outcomes and highlight the potential of 3D constructs utilizing biomaterials such as scaffolds, cells, and biologically active molecules. Our review offers a comprehensive guide for researchers and clinicians, providing insights into how to reestablish reproductive tissue structure and function using innovative surgical approaches and biomaterials. We highlight the benefits of REPROTEN for patients, including preservation of fertility and hormonal production, reconstruction of uterine and cervical structures, and restoration of sexual and urinary functions. Despite significant progress, REPROTEN still faces ethical and technical challenges that need to be addressed. Our review underscores the importance of continued research in this field to advance the development of effective and safe REPROTEN approaches for patients with reproductive disorders.

Advances of three-dimensional (3D) culture systems for in vitro spermatogenesis

The loss of germ cells and spermatogenic failure in non-obstructive azoospermia are believed to be the main causes of male infertility. Laboratory studies have used in vitro testicular models and different 3-dimensional (3D) culture systems for preservation, proliferation and differentiation of spermatogonial stem cells (SSCs) in recent decades. The establishment of testis-like structures would facilitate the study of drug and toxicity screening, pathological mechanisms and in vitro differentiation of SSCs which resulted in possible treatment of male infertility. The different culture systems using cellular aggregation with self-assembling capability, the use of different natural and synthetic biomaterials and various methods for scaffold fabrication provided a suitable 3D niche for testicular cells development. Recently, 3D culture models have noticeably used in research for their architectural and functional similarities to native microenvironment. In this review article, we briefly investigated the recent 3D culture systems that provided a suitable platform for male fertility preservation through organ culture of testis fragments, proliferation and differentiation of SSCs.

Recent advances in endocrine organoids for therapeutic application

The endocrine system, consisting of the hypothalamus, pituitary, endocrine glands, and hormones, plays a critical role in hormone metabolic interactions. The complexity of the endocrine system is a significant obstacle to understanding and treating endocrine disorders. Notably, advances in endocrine organoid generation allow a deeper understanding of the endocrine system by providing better comprehension of molecular mechanisms of pathogenesis. Here, we highlight recent advances in endocrine organoids for a wide range of therapeutic applications, from cell transplantation therapy to drug toxicity screening, combined with development in stem cell differentiation and gene editing technologies. In particular, we provide insights into the transplantation of endocrine organoids to reverse endocrine dysfunctions and progress in developing strategies for better engraftments. We also discuss the gap between preclinical and clinical research. Finally, we provide future perspectives for research on endocrine organoids for the development of more effective treatments for endocrine disorders.

Engineering prostate cancer in vitro: what does it take?

A key challenge in the clinical management and cause of treatment failure of prostate cancer (PCa) is its molecular, cellular and clinical heterogeneity. Modelling systems that fully recapitulate clinical diversity and resistant phenotypes are urgently required for the development of successful personalised PCa therapies. The advent of the three-dimensional (3D) organoid model has revolutionised preclinical cancer research through reflecting heterogeneity and offering genomic and environmental manipulation that has opened up unparalleled opportunities for applications in disease modelling, high-throughput drug screening and precision medicine. Despite these remarkable achievements of organoid technology, several shortcomings in emulating the complex tumor microenvironment and dynamic process of metastasis as well as the epigenome profile limit organoids achieving true in vivo functionality. Technological advances in tissue engineering have enabled the development of innovative tools to facilitate the design of improved 3D cancer models. In this review, we highlight the current in vitro 3D PCa models with a special focus on organoids and discuss engineering approaches to create more physiologically relevant PCa organoid models and maximise their translational relevance that ultimately will help to realise the transformational power of precision medicine.

Modelling adult stem cells and their niche in health and disease with epithelial organoids

Adult stem cells are responsible for homoeostasis and regeneration of epithelial tissues. Stem cell function is regulated by both cell autonomous mechanisms as well as the niche. Deregulated stem cell function contributes to diseases such as cancer. Epithelial organoid cultures generated from tissue-resident adult stem cells have allowed unprecedented insights into the biology of epithelial tissues. The subsequent adaptation of organoid technology enabled the modelling of the communication of stem cells with their cellular and non-cellular niche as well as diseases. Starting from its first model described in 2009, the murine small intestinal organoid, we discuss here how epithelial organoid cultures have been become a prime in vitro research tool for cell and developmental biology, bioengineering, and biomedicine in the last decade.

Biomaterials for Testicular Bioengineering: How far have we come and where do we have to go?

Traditional therapeutic interventions aim to restore male fertile potential or preserve sperm viability in severe cases, such as semen cryopreservation, testicular tissue, germ cell transplantation and testicular graft. However, these techniques demonstrate several methodological, clinical, and biological limitations, that impact in their results. In this scenario, reproductive medicine has sought biotechnological alternatives applied for infertility treatment, or to improve gamete preservation and thus increase reproductive rates in vitro and in vivo. One of the main approaches employed is the biomimetic testicular tissue reconstruction, which uses tissue-engineering principles and methodologies. This strategy pursues to mimic the testicular microenvironment, simulating physiological conditions. Such approach allows male gametes maintenance in culture or produce viable grafts that can be transplanted and restore reproductive functions. In this context, the application of several biomaterials have been proposed to be used in artificial biological systems. From synthetic polymers to decellularized matrixes, each biomaterial has advantages and disadvantages regarding its application in cell culture and tissue reconstruction. Therefore, the present review aims to list the progress that has been made and the continued challenges facing testicular regenerative medicine and the preservation of male reproductive capacity, based on the development of tissue bioengineering approaches for testicular tissue microenvironment reconstruction.

Organoids of the male reproductive system: Challenges, opportunities, and their potential use in fertility research

Organoids are units of function of a given organ able to reproduce, in culture, a biological structure similar in architecture and function to its counterpart in vivo. Today, it is possible to develop an organoid from a fragment of tissue, a stem cell located in an adult organ, an embryonic stem cell, or an induced pluripotent stem cell. In the past decade, many organoids have been developed which mimic stomach, pancreas, liver and brain tissues, optic cups, among many others. Additionally, different male reproductive system organs have already been developed as organoids, including the prostate and testis. These 3D cultures may be of great importance for urological cancer research and have the potential to be used in fertility research for the study of spermatozoa production and maturation, germ cells-somatic cells interactions, and mechanisms of disease. They also provide an accurate preclinical pipeline for drug testing and discovery, as well as for the study of drug resistance. In this work, we revise the current knowledge on organoid technology and its use in healthcare and research, describe the male reproductive system organoids and other biomaterials already developed, and discuss their current application. Finally, we highlight the research gaps, challenges, and opportunities in the field and propose strategies to improve the use of organoids for the study of male infertility situations. This article is categorized under: Reproductive System Diseases > Stem Cells and Development Reproductive System Diseases > Biomedical Engineering.

In vitro complete differentiation of human spermatogonial stem cells to morphologic spermatozoa using a hybrid hydrogel of agarose and laminin

Spermatogenesis refers to the differentiation of the spermatogonial stem cells (SSCs) located in the base seminiferous tubules into haploid spermatozoa. Prerequisites for in vitro spermatogenesis include an extracellular matrix (ECM), paracrine factors, and testicular somatic cells which play a supporting role for SSCs. Thus, the present study evaluated the potential of co-culturing Sertoli cells and SSCs embedded in a hybrid hydrogel of agarose and laminin, the main components of the ECM. Following the three-week conventional culture of human testicular cells, the cells were cultured in agarose hydrogel or agarose/laminin one (hybrid) for 74 days. Then, immunocytochemistry, real-time PCR, electron microscopy, and morphological staining methods were applied to analyze the presence of SSCs, as well as the other cells of the different stages of spermatogenesis. Based on the results, the colonies with positive spermatogenesis markers were observed in both culture systems. The existence of the cells of all three phases of spermatogenesis (spermatogonia, meiosis, and spermiogenesis) was confirmed in the two groups, while morphological spermatozoa were detected only in the hybrid hydrogel group. Finally, a biologically improved 3D matrix can support all the physiological activities of SSCs such as survival, proliferation, and differentiation.

Human in vitro spermatogenesis as a regenerative therapy - where do we stand?

Spermatogenesis involves precise temporal and spatial gene expression and cell signalling to reach a coordinated balance between self-renewal and differentiation of spermatogonial stem cells through various germ cell states including mitosis, and meiosis I and II, which result in the generation of haploid cells with a unique genetic identity. Subsequently, these round spermatids undergo a series of morphological changes to shed excess cytoplast, develop a midpiece and tail, and undergo DNA repackaging to eventually form millions of spermatozoa. The goal of recreating this process in vitro has been pursued since the 1920s as a tool to treat male factor infertility in patients with azoospermia. Continued advances in reproductive bioengineering led to successful generation of mature, functional sperm in mice and, in the past 3 years, in humans. Multiple approaches to study human in vitro spermatogenesis have been proposed, but technical and ethical obstacles have limited the ability to complete spermiogenesis, and further work is needed to establish a robust culture system for clinical application.

Differentiation of human spermatogonial stem cells using a human decellularized testicular scaffold supplemented by platelet-rich plasma

BACKGROUND

Effective culture systems for attachment, migration, proliferation, and differentiation of spermatogonial stem cells (SSCs) can be a promising therapeutic modality for preserving male fertility. Decellularized extracellular matrix (ECM) from native testis tissue creates a local microenvironment for testicular cell culture. Furthermore, platelet-rich plasma (PRP) contains various growth factors for the proliferation and differentiation of SSCs.

METHODS

In this study, human testicular cells were isolated and cultured for 4 weeks, and SSCs were characterized using immunocytochemistry (ICC) and flow cytometry. Human testicular tissue was decellularized (0.3% SDS, 1% Triton), and the efficiency of the decellularization process was confirmed by histological staining and DNA content analysis. SSCs were cultured on the human decellularized testicular matrix (DTM) for 4 weeks. The viability and the expression of differentiation genes were evaluated by MTT and real-time polymerase chain reaction (PCR), respectively.

RESULTS

Histological evaluation and DNA content analysis showed that the components of ECM were preserved during decellularization. Our results showed that after 4 weeks of culture, the expression levels of BAX, BCL-2, PLZF, and SCP3 were unchanged, while the expression of PRM2 significantly increased in the cells cultured on DTM supplemented with PRP (ECM-PRP). In addition, the expression of GFRA1 was significantly decreased in the ECM group compared to the control and PRP groups. Furthermore, the MTT test indicated that viability was significantly enhanced in cells plated on DTM supplemented with PRP.

CONCLUSION

Our study demonstrated that DTM supplemented with PRP can provide an effective culture system for the differentiation and viability of SSCs.

Generation and Characterization of Bovine Testicular Organoids Derived from Primary Somatic Cell Populations

Organoids are 3D-culture systems composed of tissue-specific primary cells that self-organize and self-renew, creating structures similar to those of their tissue of origin. Testicular organoids (TOs) may recreate conditions of the testicular niche in domestic and wild cattle; however, no previous TO studies have been reported in the bovine species. Thus, in the present study, we sought to generate and characterize bovine TOs derived from primary testicular cell populations including Leydig, Sertoli and peritubular myoid cells. Testicular cells were isolated from bovine testes and cultured in ultra-low attachment (ULA) plates and Matrigel. TOs were cultured in media supplemented from day 3 with 100 ng/mL of BMP4 and 10 ng/mL of FGF2 and from day 7 with 15 ng/mL of GDNF. Testicular cells were able to generate TOs after 3 days of culture. The cells positive for STAR (Leydig) and COL1A (peritubular myoid) decreased (p < 0.05), whereas cells positive for WT1 (Sertoli) increased (p < 0.05) in TOs during a 28-day culture period. The levels of testosterone in media increased (p < 0.05) at day 28 of culture. Thus, testicular cells isolated from bovine testes were able to generate TOs under in vitro conditions. These bovine TOs have steroidogenic activity characterized by the production of testosterone.

Study on properties of 3D-printed GelMA hydrogel scaffolds with different nHA contents

Biological 3D printing is a reliable technology for 3D printing bone repair scaffolds with simple operation, high efficiency, and relatively low cost. Gelatin methacryloyl (GelMA) hydrogels have attracted much attention due to their good biocompatibility, but the poor mechanical properties limit their application in bone reconstruction engineering. In this study, nano-hydroxyapatite (nHA) particles were added to GelMA hydrogels, and the performances of composite hydrogel scaffolds with different nHA contents were investigated in terms of rheological properties, light transmission properties, surface morphology, mechanical properties, and biocompatibility. The experimental results showed that the incorporation of nHA particles could effectively improve the printability and mechanical properties of the scaffolds, the scaffold fibers had better resistance to deformation, improved degradation rate, and biological experiments confirmed that nHA particles had no significant cytotoxicity. However, the addition of HA particles also reduced the light transmission properties of the slurry, and when its content exceeds a certain value, the hydrogel scaffolds show incomplete curing and eventually affect their test performance. The results can offer guidance and reference for the selection of ink and function for 3D printing bone repair scaffold.

Biomaterial strategies for the application of reproductive tissue engineering

Human reproductive organs are of vital importance to the life of an individual and the reproduction of human populations. So far, traditional methods have a limited effect in recovering the function and fertility of reproductive organs and tissues. Thus, aim to replace and facilitate the regrowth of damaged or diseased tissue, various biomaterials are developed to offer hope to overcome these difficulties and help gain further research progress in reproductive tissue engineering. In this review, we focus on the biomaterials and their four main applications in reproductive tissue engineering: in vitro generation and culture of reproductive cells; development of reproductive organoids and models; in vivo transplantation of reproductive cells or tissues; and regeneration of reproductive tissue. In reproductive tissue engineering, designing biomaterials for different applications with different mechanical properties, structure, function, and microenvironment is challenging and important, and deserves more attention.

•

Various biomaterials have been developed and used in reproductive tissue engineering.

•

3D culture systems can lead to better cell-cell interactions for in vitro production of reproductive cells.

•

Reproductive organoids and models are formed by biomaterials to simulate the environment of natural reproductive organs.

•

Biomaterials should promote vascular regeneration and resist inflammation for in-situ reproductive tissue regeneration.

In vitro production of mouse morphological sperm in artificial testis bioengineered by 3D printing of extracellular matrix

Since autologous stem cell transplantation is prone to cancer recurrence, in vitro sperm production is regarded a safer approach to fertility preservation. In this study, the spermatogenesis process on testicular tissue extracellular matrix (T-ECM)-derived printing structure was evaluated. Ram testicular tissue was decellularized using a hypertonic solution containing triton and the extracted ECM was used as a bio-ink to print an artificial testis. Following cell adhesion and viability examination, pre-meiotic and post-meiotic cells in the study groups (as testicular suspension and co-culture with Sertoli cells) were confirmed by real-time PCR, flow-cytometry and immunocytochemistry methods. Morphology of differentiated cells was evaluated using transmission electron microscopy (TEM), toluidine blue, Giemsa, and hematoxylin and eosin (H&E) staining. The functionality of Leydig and Sertoli cells was determined by their ability for hormone secretion. The decellularization of testicular tissue fragments was successful and had efficiently removed the cellular debris and preserved the ECM compounds. High cell viability, colonization, and increased expression of pre-meiotic markers in cultured testicular cells on T-ECM-enriched scaffolds confirmed their proliferation. Furthermore, the inoculation of neonatal mouse testicular cells onto T-ECM-enriched scaffolds resulted in the generation of sperm. Morphology evaluation showed that the structure of these cells was quite similar to mature sperm with a specialized tail structure. The hormonal analysis also confirmed production and secretion of testosterone and inhibin B by Leydig and Sertoli cells. T-ECM printed artificial testis is a future milestone that promises for enhancing germ cell maintenance and differentiation, toxicology studies, and fertility restoration to pave the way for new human infertility treatments in the future.

A brief history of testicular organoids: from theory to the wards

In recent years, researchers have successfully generated many human and mammalian organoid models, including organoids representing the intestine, prostate, ovary, bladder, liver, and brain. Therefore, organoids have become an important research model in the fields of regenerative medicine, drug research, and gene therapy, acting as a bridge between in vivo and in vitro experiments. In addition, testicular organoids (TOs) represent the highest level of in vitro culture of spermatogenic cells in a simulated testicular environment. However, the generation of TOs is still in the early stages, and there is still much room for improvement in dealing with the many challenges and prospects to achieve the goal of TOs that simulate the testicular microenvironment in vitro or even reconstruct the process of spermatogenesis without the need to reconstruct seminiferous tubules. We review the brief history of TO generation and some major strategies for functional applications of TOs, which are the main concerns of our clinicians and laboratory researchers.

Microfluidic and Static Organotypic Culture Systems to Support Ex Vivo Spermatogenesis From Prepubertal Porcine Testicular Tissue: A Comparative Study

Background:In vitro maturation of immature testicular tissue (ITT) cryopreserved for fertility preservation is a promising fertility restoration strategy. Organotypic tissue culture proved successful in mice, leading to live births. In larger mammals, including humans, efficiently reproducing spermatogenesis ex vivo remains challenging. With advances in biomaterials technology, culture systems are becoming more complex to better mimic in vivo conditions. Along with improving culture media components, optimizing physical culture conditions (e.g., tissue perfusion, oxygen diffusion) also needs to be considered. Recent studies in mice showed that by using silicone-based hybrid culture systems, the efficiency of spermatogenesis can be improved. Such systems have not been reported for ITT of large mammals.

Methods: Four different organotypic tissue culture systems were compared: static i.e., polytetrafluoroethylene membrane inserts (OT), agarose gel (AG) and agarose gel with polydimethylsiloxane chamber (AGPC), and dynamic i.e., microfluidic (MF). OT served as control. Porcine ITT fragments were cultured over a 30-day period using a single culture medium. Analyses were performed at days (d) 0, 5, 10, 20 and 30. Seminiferous tubule (ST) integrity, diameters, and tissue core integrity were evaluated on histology. Immunohistochemistry was used to identify germ cells (PGP9.5, VASA, SYCP3, CREM), somatic cells (SOX9, INSL3) and proliferating cells (Ki67), and to assess oxidative stress (MDA) and apoptosis (C-Caspase3). Testosterone was measured in supernatants using ELISA.

Results: ITT fragments survived and grew in all systems. ST diameters, and Sertoli cell (SOX9) numbers increased, meiotic (SYCP3) and post-meiotic (CREM) germ cells were generated, and testosterone was secreted. When compared to control (OT), significantly larger STs (d10 through d30), better tissue core integrity (d5 through d20), higher numbers of undifferentiated spermatogonia (d30), meiotic and post-meiotic germ cells (SYCP3: d20 and 30, CREM: d20) were observed in the AGPC system. Apoptosis, lipid peroxidation (MDA), ST integrity, proliferating germ cell (Ki67/VASA) numbers, Leydig cell (INSL3) numbers and testosterone levels were not significantly different between systems.

Conclusions: Using a modified culture system (AGPC), germ cell survival and the efficiency of porcine germ cell differentiation were moderately improved ex vivo. We assume that further optimization can be obtained with concomitant modifications in culture media components.

Future Challenges and Opportunities of Extracellular Matrix Hydrogels in Female Reproductive Medicine

Bioengineering and reproductive medicine have progressed shoulder to shoulder for several decades. A key point of overlap is the development and clinical translation of technologies to support reproductive health, e.g., scaffold-free constructs, polymeric scaffolds, bioprinting or microfluidics, and hydrogels. Hydrogels are the focus of intense study, and those that are derived from the extracellular matrix (ECM) of reproductive tissues and organs are emerging as promising new players given their results in pre-clinical models. This literature review addresses the recent advances in the use of organ-specific ECM hydrogels in reproductive medicine, considering the entire female reproductive tract. We discuss in-depth papers describing the development of ECM hydrogels, their use in in vitro models, and their in vivo application in preclinical studies. We also summarize the functions of hydrogels, including as grafts, carriers for cell transplantation, or drug depots, and present the potential and possible scope for use of ECM hydrogels in the near future based on recent scientific advances.

Hydrogels derived from decellularized liver tissue support the growth and differentiation of cholangiocyte organoids

Human cholangiocyte organoids are promising for regenerative medicine applications, such as repair of damaged bile ducts. However, organoids are typically cultured in mouse tumor-derived basement membrane extracts (BME), which is poorly defined, highly variable and limits the direct clinical applications of organoids in patients. Extracellular matrix (ECM)-derived hydrogels prepared from decellularized human or porcine livers are attractive alternative culture substrates. Here, the culture and expansion of human cholangiocyte organoids in liver ECM(LECM)-derived hydrogels is described. These hydrogels support proliferation of cholangiocyte organoids and maintain the cholangiocyte-like phenotype. The use of LECM hydrogels does not significantly alter the expression of selected genes or proteins, such as the cholangiocyte marker cytokeratin-7, and no species-specific effect is found between human or porcine LECM hydrogels. Proliferation rates of organoids cultured in LECM hydrogels are lower, but the differentiation capacity of the cholangiocyte organoids towards hepatocyte-like cells is not altered by the presence of tissue-specific ECM components. Moreover, human LECM extracts support the expansion of ICO in a dynamic culture set up without the need for laborious static culture of organoids in hydrogel domes. Liver ECM hydrogels can successfully replace tumor-derived BME and can potentially unlock the full clinical potential of human cholangiocyte organoids.

Engineering the Extracellular Matrix for Organoid Culture

Organoids show great potential in clinical translational research owing to their intriguing properties to represent a near physiological model for native tissues. However, the dependency of organoid generation on the use of poorly defined matrices has hampered their clinical application. Current organoid culture systems mostly reply on biochemical signals provided by medium compositions and cell-cell interactions to control growth. Recent studies have highlighted the importance of the extracellular matrix (ECM) composition, cell-ECM interactions, and mechanical signals for organoid expansion and differentiation. Thus, several hydrogel systems prepared using natural or synthetic-based materials have been designed to recreate the stem cell niche in vitro, providing biochemical, biophysical, and mechanical signals. In this review, we discuss how recapitulating multiple aspects of the tissue-specific environment through designing and applying matrices could contribute to accelerating the translation of organoid technology from the laboratory to therapeutic and pharmaceutical applications.

Application of Tissue-Specific Extracellular Matrix in Tissue Engineering: Focus on Male Fertility Preservation

In vitro spermatogenesis and xenotransplantation of the immature testicular tissues (ITT) are the experimental approaches that have been developed for creating seminiferous tubules-like functional structures in vitro and keeping the integrity of the ITTs in vivo, respectively. These strategies are rapidly developing in response to the growing prevalence of infertility in adolescent boys undergoing cancer treatment, by the logic that there is no sperm cryopreservation option for them. Recently, with the advances made in the field of tissue engineering and biomaterials, these methods have achieved promising results for fertility preservation. Due to the importance of extracellular matrix for the formation of vascular bed around the grafted ITTs and also the creation of spatial arrangements between Sertoli cells and germ cells, today it is clear that the scaffold plays a very important role in the success of these methods. Decellularized extracellular matrix (dECM) as a biocompatible, functionally graded, and biodegradable scaffold with having tissue-specific components and growth factors can support reorganization and physiologic processes of originated cells. This review discusses the common protocols for the tissue decellularization, sterilization, and hydrogel formation of the decellularized and lyophilized tissues as well as in vitro and in vivo studies on the use of the testis-derived dECM for testicular organoids.

Long-Term Maintenance and Meiotic Entry of Early Germ Cells in Murine Testicular Organoids Functionalized by 3D Printed Scaffolds and Air-Medium Interface Cultivation

Short-term germ cell survival and central tissue degeneration limit organoid cultures. Here, testicular organoids (TOs) were generated from two different mouse strains in 3D printed one-layer scaffolds (1LS) at the air-medium interface displaying tubule-like structures and Leydig cell functionality supporting long-term survival and differentiation of germ cells to the meiotic phase. Chimeric TOs, consisting of a mixture of primary testicular cells and EGFP⁺ germline stem (GS) cells, were cultured in two-layer scaffolds (2LSs) for better entrapment. They showed an improved spheroidal morphology consisting of one intact tubule-like structure and surrounding interstitium, representing the functional unit of a testis. However, GS cells did not survive long-term culture. Consequently, further optimization of the culture medium is required to enhance the maintenance and differentiation of germ cells. The opportunities TOs offer to manipulate somatic and germ cells are essential for the study of male infertility and the search for potential therapies.

Decellularised extracellular matrix-based biomaterials for repair and regeneration of central nervous system

The central nervous system (CNS), consisting of the brain and spinal cord, regulates the mind and functions of the organs. CNS diseases, leading to changes in neurological functions in corresponding sites and causing long-term disability, represent one of the major public health issues with significant clinical and economic burdens worldwide. In particular, the abnormal changes in the extracellular matrix under various disease conditions have been demonstrated as one of the main factors that can alter normal cell function and reduce the neuroregeneration potential in damaged tissue. Decellularised extracellular matrix (dECM)-based biomaterials have been recently utilised for CNS applications, closely mimicking the native tissue. dECM retains tissue-specific components, including proteoglycan as well as structural and functional proteins. Due to their unique composition, these biomaterials can stimulate sensitive repair mechanisms associated with CNS damages. Herein, we discuss the decellularisation of the brain and spinal cord as well as recellularisation of acellular matrix and the recent progress in the utilisation of brain and spinal cord dECM.

Testicular tissue cryopreservation for fertility preservation in prepubertal and adolescent boys: A 6 year experience from a Swiss multi-center network

Testicular tissue cryopreservation is the only option of fertility preservation in prepubertal boys. While it is considered experimental, since procedures to obtain mature spermatozoa from prepubertal testicular tissue are still under development, testicular tissue cryopreservation programs have emerged worldwide. Our aim was to study the feasibility and safety of a program of testicular tissue cryopreservation in prepubertal and adolescent boys facing gonadotoxic treatment in three University hospitals in Switzerland. Testicular tissue cryopreservation was accepted by 90% of families, with a total of 35 patients included. The average patient age was 8.5 years (range 7 months to 18.5 years). Malignancies were the most common diagnosis (31 patients, 88.6%) with 16 (45.7%) solid tumors and 15 (42.9%) hematological malignancies. Four (11.4%) patients had a benign condition. The main indication for testicular tissue cryopreservation was conditioning for hematologic stem cell transplantation (25 patients, 71.4%). Testicular tissue was cryopreserved according to the freezing protocol of Louvain Catholic University (Belgium), which includes either only immature testicular tissue freezing, or mature and immature testicular tissue freezing depending on the age of the patient and the presence or absence of haploid cells. The median number of spermatogonia per tubule cross-section was 2 (range 0-6) and spermatozoa were found in only one patient. Tumoral cells were found in one testicular biopsy of a leukemic patient. There were two minor adverse events and none of them required medical treatment or surgical revision. Five patients died during follow-up. Our data demonstrate the feasibility and safety of a program of testicular tissue cryopreservation coordinated by a multidisciplinary team of fertility preservation. Despite the experimental aspect of the procedure, the acceptation rate was high, which highlights the willingness of families and patients to participate in testicular tissue cryopreservation.

Towards organoid culture without Matrigel

Organoids-cellular aggregates derived from stem or progenitor cells that recapitulate organ function in miniature-are of growing interest in developmental biology and medicine. Organoids have been developed for organs and tissues such as the liver, gut, brain, and pancreas; they are used as organ surrogates to study a wide range of questions in basic and developmental biology, genetic disorders, and therapies. However, many organoids reported to date have been cultured in Matrigel, which is prepared from the secretion of Engelbreth-Holm-Swarm mouse sarcoma cells; Matrigel is complex and poorly defined. This complexity makes it difficult to elucidate Matrigel-specific factors governing organoid development. In this review, we discuss promising Matrigel-free methods for the generation and maintenance of organoids that use decellularized extracellular matrix (ECM), synthetic hydrogels, or gel-forming recombinant proteins.

Formation of organoid-like structures in the decellularized rat testis

Objectives

In testis, the extracellular matrix (ECM) in addition to the supportive role for cells in the seminiferous epithelium, is also essential for the accurate functioning of these cells. Thus, using a decellularized testicular ECM (DTECM), as a scaffold for three-dimensional (3D) culture of testicular cells can mimic native ECM for studying in vitro spermatogenesis.

Materials and Methods

The rat testis was decellularized via perfusion of 0.5% sodium dodecyl sulfate (SDS) for 48 hr, followed by 1% Triton X-100 for 6 hr, and then 1% DNase I for 1 hr. The efficiency of decellularization was evaluated by histology, immunohistochemistry (IHC), scanning electron microscopy (SEM), and MTT test. The prepared scaffolds were recellularized with testicular cells and cultured and assessed with hematoxylin-eosin (H&E) staining after two weeks.

Results

Based on the H&E image, no trace of cell components could be observed in DTECM. IHC images demonstrated collagen types I and IV, laminin, and fibronectin were preserved. Masson's trichrome and alcian blue staining revealed that collagen and glycosaminoglycans (GAGs) were retained, and the SEM image indicated that 3D testicular architecture remained after the decellularization process. Based on the results of the MTT test, DTECM was cytocompatible, and H&E images represented that DTECM supports testicular cell arrangements in seminiferous tubule-like structures (STLSs) and organoid-like structures (OLSs).

Conclusion

The results showed that the applied protocol successfully decellularized the testis tissue of the rat. Therefore, these scaffolds may provide an appropriate vehicle for in vitro reconstruction of the seminiferous tubule.

Decellularization of Male Reproductive Tissue

Decellularized testicular matrix (DTM) enables researchers to focus on the specific composition of the testicular extracellular matrix (ECM) and elucidate its role in spermatogenesis. Furthermore, it provides the natural architectural arrangement that could guide the reorganization of dissociated testicular cells in vitro. This is a key consideration as the presence of an authentic nutritive and endocrine support has been proven to be essential for in vitro spermatogenesis, at least in the mouse (Oliver and Stukenborg in Andrology 8:825-834, 2020; Richer et al. in Andrology 12741, 2019). Hence, scaffolds of DTM could be harnessed for the development of a human in vitro spermatogenesis culture system, which is a missing link in male fertility preservation and could be a possible treatment for nonobstructive azoospermia (Gassei and Orwig in Steril 105:256-266, 2016).

Self-organising human gonads generated by a Matrigel-based gradient system

BACKGROUND

Advances in three-dimensional culture technologies have led to progression in systems used to model the gonadal microenvironment in vitro. Despite demonstrating basic functionality, tissue organisation is often limited. We have previously detailed a three-dimensional culture model termed the three-layer gradient system to generate rat testicular organoids in vitro. Here we extend the model to human first-trimester embryonic gonadal tissue.

RESULTS

Testicular cell suspensions reorganised into testis-like organoids with distinct seminiferous-like cords situated within an interstitial environment after 7 days. In contrast, tissue reorganisation failed to occur when mesonephros, which promotes testicular development in vivo, was included in the tissue digest. Organoids generated from dissociated female gonad cell suspensions formed loosely organised cords after 7 days. In addition to displaying testis-specific architecture, testis-like organoids demonstrated evidence of somatic cell differentiation. Within the 3-LGS, we observed the onset of AMH expression in the cytoplasm of SOX9-positive Sertoli cells within reorganised testicular cords. Leydig cell differentiation and onset of steroidogenic capacity was also revealed in the 3-LGS through the expression of key steroidogenic enzymes StAR and CYP17A1 within the interstitial compartment. While the 3-LGS generates a somatic cell environment capable of supporting germ cell survival in ovarian organoids germ cell loss was observed in testicular organoids.

CONCLUSION

The 3-LGS can be used to generate organised whole gonadal organoids within 7 days. The 3-LGS brings a new opportunity to explore gonadal organogenesis and contributes to the development of more complex in vitro models in the field of developmental and regenerative medicine.

Harness Organoid Models for Virological Studies in Animals: A Cross-Species Perspective

Animal models and cell culture in vitro are primarily used in virus and antiviral immune research. Whereas the limitation of these models to recapitulate the viral pathogenesis in humans has been made well aware, it is imperative to introduce more efficient systems to validate emerging viruses in both domestic and wild animals. Organoids ascribe to representative miniatures of organs (i.e., mini-organs), which are derived from three-dimensional culture of stem cells under respective differential conditions mimicking endogenous organogenetic niches. Organoids have broadened virological studies in the human context, particularly in recent uses for COVID19 research. This review examines the status and potential for cross-species applied organotypic culture in validating emerging animal, particularly zoonotic, viruses in domestic and wild animals.

Organoids in modelling infectious diseases

Approaches based on animal and two-dimensional (2D) cell culture models cannot ensure reliable results in modeling novel pathogens or in drug testing in the short term; therefore, there is rising interest in platforms such as organoids. To develop a toolbox that can be used successfully to overcome current issues in modeling various infections, it is essential to provide a framework of recent achievements in applying organoids. Organoids have been used to study viruses, bacteria, and protists that cause, for example, respiratory, gastrointestinal, and liver diseases. Their future as models of infection will be associated with improvements in system complexity, including abilities to model tissue structure, a dynamic microenvironment, and coinfection. Teaser. Organoids are a flexible tool for modelling viral, bacterial and protist infections. They can provide fast and reliable information on the biology of pathogens and in drug screening, and thus have become essential in combatting emerging infectious diseases.

The Translational Application of Hydrogel for Organoid Technology: Challenges and Future Perspectives

Human organoids mimic the physiology and tissue architecture of organs and are of great significance for promoting the study of human diseases. Traditionally, organoid cultures rely predominantly on animal or tumor-derived extracellular matrix (ECM), resulting in poor reproducibility. This limits their utility in for large-scale drug screening and application for regenerative medicine. Recently, synthetic polymeric hydrogels, with high biocompatibility and biodegradability, stability, uniformity of compositions, and high throughput properties, have emerged as potential materials for achieving 3D architectures for organoid cultures. Compared to conventional animal or tumor-derived organoids, these newly engineered hydrogel-based organoids more closely resemble human organs, as they are able to mimic native structural and functional properties observed in-situ. In this review, recent developments in hydrogel-based organoid culture will be summarized, emergent hydrogel technology will be highlighted, and future challenges in applying them to organoid culture will be discussed.

Generation of a Highly Biomimetic Organoid, Including Vasculature, Resembling the Native Immature Testis Tissue

The creation of a testis organoid (artificial testis tissue) with sufficient resemblance to the complex form and function of the innate testis remains challenging, especially using non-rodent donor cells. Here, we report the generation of an organoid culture system with striking biomimicry of the native immature testis tissue, including vasculature. Using piglet testis cells as starting material, we optimized conditions for the formation of cell spheroids, followed by long-term culture in an air–liquid interface system. Both fresh and frozen-thawed cells were fully capable of self-reassembly into stable testis organoids consisting of tubular and interstitial compartments, with all major cell types and structural details expected in normal testis tissue. Surprisingly, our organoids also developed vascular structures; a phenomenon that has not been reported in any other culture system. In addition, germ cells do not decline over time, and Leydig cells release testosterone, hence providing a robust, tunable system for diverse basic and applied applications.

Accelerated and Improved Vascular Maturity after Transplantation of Testicular Tissue in Hydrogels Supplemented with VEGF- and PDGF-Loaded Nanoparticles

Avascular transplantation of frozen-thawed testicular tissue fragments represents a potential future technique for fertility restoration in boys with cancer. A significant loss of spermatogonia was observed in xeno-transplants of human tissue most likely due to the hypoxic period before revascularization. To reduce the effect of hypoxia-reoxygenation injuries, several options have already been explored, like encapsulation in alginate hydrogel and supplementation with nanoparticles delivering a necrosis inhibitor (NECINH) or VEGF. While these approaches improved short-term (5 days) vascular surfaces in grafts, neovessels were not maintained up to 21 days; i.e., the time needed for achieving vessel stabilization. To better support tissue grafts, nanoparticles loaded with VEGF, PDGF and NECINH were developed. Testicular tissue fragments from 4-5-week-old mice were encapsulated in calcium-alginate hydrogels, either non-supplemented (control) or supplemented with drug-loaded nanoparticles (VEGF-nanoparticles; VEGF-nanoparticles + PDGF-nanoparticles; NECINH-nanoparticles; VEGF-nanoparticles + NECINH-nanoparticles; and VEGF-nanoparticles + PDGF-nanoparticles + NECINH-nanoparticles) before auto-transplantation. Grafts were recovered after 5 or 21 days for analyses of tissue integrity (hematoxylin-eosin staining), spermatogonial survival (immuno-histo-chemistry for promyelocytic leukemia zinc finger) and vascularization (immuno-histo-chemistry for α-smooth muscle actin and CD-31). Our results showed that a combination of VEGF and PDGF nanoparticles increased vascular maturity and induced a faster maturation of vascular structures in grafts.

Antioxidant and antiapoptotic paracrine effects of mesenchymal stem cells on spermatogenic arrest in oligospermia rat model

BACKGROUND

Oligospermia is one of the common causative factors of male infertility. Some medical and hormonal therapy for male infertility is typically with unsatisfactory outcome. Stem cell therapy has become a new therapeutic strategy for restoring function in addition to inducing proliferation and differentiation of malfunctioning germ cells. This work aims at investigating the potential ability of BM-MSCs to repair the spermatogenic arrest in oligospermic rat model.

METHODS

In this work, a rat model of oligospermia was induced using two intraperitoneal injections of busulfan (15 mg/kg) with two weeks interval. Rats were divided into (i) donor group [source of the bone marrow mesenchymal stem cells (BM-MSCs) that were labelled and transfected with green fluorescent protein (GFP)] and (ii) experimental groups that were subdivided into: GpI (control), GpII (spermatogenic arrest model), GpIII (untreated rats), and GpIV (BM-MSCs treated rats). Estimation of the testicular weight, sperm count and motility % were performed. Histological and immunohistochemical staining for inducible nitric oxide synthase (iNOS) and caspase-3 (Cas-3) were conducted. Besides, the level of the testicular malondialdehyde (MDA), tumor necrosis factor-alpha (TNF-α) and testicular testosterone were estimated by ELISA.

RESULTS

Oligospermic rats illustrated hypospermatogenesis of the seminiferous tubule with spermatocyte and spermatid arrest, focal thickening of the basement membrane and significant increase in germ cells apoptosis and testicular oxidative stress. Compared with the control, MDA and TNF-α were markedly elevated with marked suppression of the testicular testosterone. Intra-testicular injection of BM-MSCs substantially ameliorated these changes and effectively improved the sperm count and motility %.

CONCLUSIONS

BM-MSCs improved the induced-spermatogenic arrest in the rat model mainly through anti-apoptotic and antioxidant paracrine effects.

Strategies for cryopreservation of testicular cells and tissues in cancer and genetic diseases

Cryopreservation of testicular cells and tissues is useful for the preservation and restoration of fertility in pre-pubertal males expecting gonadotoxic treatment for cancer and genetic diseases causing impaired spermatogenesis. A number of freezing and vitrification protocols have thus been tried and variable results have been reported in terms of cell viability spermatogenesis progression and the production of fertile spermatozoa. A few studies have also reported the production of live offspring from cryopreserved testicular stem cells and tissues in rodents but their replication in large animals and human have been lacking. Advancement in in vitro spermatogenesis system has improved the possibility of producing fertile spermatozoa from the cryopreserved testis and has reduced the dependency on transplantation. This review provides an update on various cryopreservation strategies for fertility preservation in males expecting gonadotoxic treatment. It also discusses various methods of assessing and ameliorating cryoinjuries. Newer developments on in vitro spermatogenesis and testicular tissue engineering for in vitro sperm production from cryopreserved SSCs and testicular tissue are also discussed.

Regulation of Cell Types Within Testicular Organoids

Organoids are 3-dimensional (3D) structures grown in vitro that emulate the cytoarchitecture and functions of true organs. Therefore, testicular organoids arise as an important model for research on male reproductive biology. These organoids can be generated from different sources of testicular cells, but most studies to date have used immature primary cells for this purpose. The complexity of the mammalian testicular cytoarchitecture and regulation poses a challenge for working with testicular organoids, because, ideally, these 3D models should mimic the organization observed in vivo. In this review, we explore the characteristics of the most important cell types present in the testicular organoid models reported to date and discuss how different factors influence the regulation of these cells inside the organoids and their outcomes. Factors such as the developmental or maturational stage of the Sertoli cells, for example, influence organoid generation and structure, which affect the use of these 3D models for research. Spermatogonial stem cells have been a focus recently, especially in regard to male fertility preservation. The regulation of the spermatogonial stem cell niche inside testicular organoids is discussed in the present review, as this research area may be positively affected by recent progress in organoid generation and tissue engineering. Therefore, the testicular organoid approach is a very promising model for male reproductive biology research, but more studies and improvements are necessary to achieve its full potential.

Organoids: a promising new in vitro platform in livestock and veterinary research

Organoids are self-organizing, self-renewing three-dimensional cellular structures that resemble organs in structure and function. They can be derived from adult stem cells, embryonic stem cells, or induced pluripotent stem cells. They contain most of the relevant cell types with a topology and cell-to-cell interactions resembling that of the in vivo tissue. The widespread and increasing adoption of organoid-based technologies in human biomedical research is testament to their enormous potential in basic, translational- and applied-research. In a similar fashion there appear to be ample possibilities for research applications of organoids from livestock and companion animals. Furthermore, organoids as in vitro models offer a great possibility to reduce the use of experimental animals. Here, we provide an overview of studies on organoids in livestock and companion animal species, with focus on the methods developed for organoids from a variety of tissues/organs from various animal species and on the applications in veterinary research. Current limitations, and ongoing research to address these limitations, are discussed. Further, we elaborate on a number of fields of research in animal nutrition, host-microbe interactions, animal breeding and genomics, and animal biotechnology, in which organoids may have great potential as an in vitro research tool.

Current progress, challenges, and future prospects of testis organoids†

Spermatogenic failure is believed to be a major cause of male infertility. The establishment of a testis organoid model would facilitate the study of such pathological mechanisms and open the possibility of male fertility preservation. Because of the complex structures and cellular events occurring within the testis, the establishment of a compartmentalized testis organoid with a complete spermatogenic cycle remains a challenge in all species. Since the late 20th century, a great variety of scaffold-based and scaffold-free testis cell culture systems have been established to recapitulate de novo testis organogenesis and in vitro spermatogenesis. The utilization of the hydrogel scaffolds provides a 3D microenvironment for testis cell growth and development, facilitating the reconstruction of de novo testis tissue-like structures and spermatogenic differentiation. Using a combination of different strategies, including the use of various scaffolding biomaterials, the incorporation of the living cells with high self-assembling capacity, and the integration of the advanced fabrication techniques, a scaffold-based testis organoid with a compartmentalized structure that supports in vitro spermatogenesis may be achieved. This article briefly reviews the current progress in the development of scaffold-based testis organoids while focusing on the scaffolding biomaterials (hydrogels), cell sources, and scaffolding approaches. Key challenges in current organoid studies are also discussed along with recommendations for future research.

Proteinaceous Hydrogels for Bioengineering Advanced 3D Tumor Models

The establishment of tumor microenvironment using biomimetic in vitro models that recapitulate key tumor hallmarks including the tumor supporting extracellular matrix (ECM) is in high demand for accelerating the discovery and preclinical validation of more effective anticancer therapeutics. To date, ECM-mimetic hydrogels have been widely explored for 3D in vitro disease modeling owing to their bioactive properties that can be further adapted to the biochemical and biophysical properties of native tumors. Gathering on this momentum, herein the current landscape of intrinsically bioactive protein and peptide hydrogels that have been employed for 3D tumor modeling are discussed. Initially, the importance of recreating such microenvironment and the main considerations for generating ECM-mimetic 3D hydrogel in vitro tumor models are showcased. A comprehensive discussion focusing protein, peptide, or hybrid ECM-mimetic platforms employed for modeling cancer cells/stroma cross-talk and for the preclinical evaluation of candidate anticancer therapies is also provided. Further development of tumor-tunable, proteinaceous or peptide 3D microtesting platforms with microenvironment-specific biophysical and biomolecular cues will contribute to better mimic the in vivo scenario, and improve the predictability of preclinical screening of generalized or personalized therapeutics.

Advanced bioengineering of male germ stem cells to preserve fertility

In modern life, several factors such as genetics, exposure to toxins, and aging have resulted in significant levels of male infertility, estimated to be approximately 18% worldwide. In response, substantial progress has been made to improve in vitro fertilization treatments (e.g. microsurgical testicular sperm extraction (m-TESE), intra-cytoplasmic sperm injection (ICSI), and round spermatid injection (ROSI)). Mimicking the structure of testicular natural extracellular matrices (ECM) outside of the body is one clear route toward complete in vitro spermatogenesis and male fertility preservation. Here, a new wave of technological innovations is underway applying regenerative medicine strategies to cell-tissue culture on natural or synthetic scaffolds supplemented with bioactive factors. The emergence of advanced bioengineered systems suggests new hope for male fertility preservation through development of functional male germ cells. To date, few studies aimed at in vitro spermatogenesis have resulted in relevant numbers of mature gametes. However, a substantial body of knowledge on conditions that are required to maintain and mature male germ cells in vitro is now in place. This review focuses on advanced bioengineering methods such as microfluidic systems, bio-fabricated scaffolds, and 3D organ culture applied to the germline for fertility preservation through in vitro spermatogenesis.

Fertility preservation for prepubertal boys: lessons learned from the past and update on remaining challenges towards clinical translation

BACKGROUND

Childhood cancer incidence and survivorship are both on the rise. However, many lifesaving treatments threaten the prepubertal testis. Cryopreservation of immature testicular tissue (ITT), containing spermatogonial stem cells (SSCs), as a fertility preservation (FP) option for this population is increasingly proposed worldwide. Recent achievements notably the birth of non-human primate (NHP) progeny using sperm developed in frozen-thawed ITT autografts has given proof of principle of the reproductive potential of banked ITT. Outlining the current state of the art on FP for prepubertal boys is crucial as some of the boys who have cryopreserved ITT since the early 2000s are now in their reproductive age and are already seeking answers with regards to their fertility.

OBJECTIVE AND RATIONALE

In the light of past decade achievements and observations, this review aims to provide insight into relevant questions for clinicians involved in FP programmes. Have the indications for FP for prepubertal boys changed over time? What is key for patient counselling and ITT sampling based on the latest achievements in animals and research performed with human ITT? How far are we from clinical application of methods to restore reproductive capacity with cryostored ITT?

SEARCH METHODS

An extensive search for articles published in English or French since January 2010 to June 2020 using keywords relevant to the topic of FP for prepubertal boys was made in the MEDLINE database through PubMed. Original articles on fertility preservation with emphasis on those involving prepubertal testicular tissue, as well as comprehensive and systematic reviews were included. Papers with redundancy of information or with an absence of a relevant link for future clinical application were excluded. Papers on alternative sources of stem cells besides SSCs were excluded.

OUTCOMES

Preliminary follow-up data indicate that around 27% of boys who have undergone testicular sampling as an FP measure have proved azoospermic and must therefore solely rely on their cryostored ITT to ensure biologic parenthood. Auto-transplantation of ITT appears to be the first technique that could enter pilot clinical trials but should be restricted to tissue free of malignant cells. While in vitro spermatogenesis circumvents the risk linked to cancer cell contamination and has led to offspring in mice, complete spermatogenesis has not been achieved with human ITT. However, generation of haploid germ cells paves the way to further studies aimed at completing the final maturation of germ cells and increasing the efficiency of the processes.

WIDER IMPLICATIONS

Despite all the research done to date, FP for prepubertal boys remains a relatively young field and is often challenging to healthcare providers, patients and parents. As cryopreservation of ITT is now likely to expand further, it is important not only to acknowledge some of the research questions raised on the topic, e.g. the epigenetic and genetic integrity of gametes derived from strategies to restore fertility with banked ITT but also to provide healthcare professionals worldwide with updated knowledge to launch proper multicollaborative care pathways in the field and address clinical issues that will come-up when aiming for the child's best interest.

Testicular organoid formation is a property of immature somatic cells, which self-assemble and exhibit long-term hormone-responsive endocrine function

Testicular organoid models are tools to study testicular physiology, development, and spermatogenesis in vitro. However, few side-by-side comparisons of organoid generation method have been evaluated. Here, we directly tested whether the culture microenvironment is the prime determinant promoting testicular organoid self-assembly. Using Matrigel as a representative extracellular matrix (ECM), we compared multiple culture environments, 2D and 3D, ECM-free and ECM, for organoid self-assembly with immature murine testicular cells. De novo tissues were observed to self-assemble in all four culture environments tested within 72 h, however, these tissues only met requirements to be named organoids in 2D ECM and 3D ECM-free (3DF) culture methods. Based on these results, 3DF was selected for further study, and used to examine animal age as an independent variable. Organoid assembly was significantly delayed when using pubertal murine cells and entirely absent from adult murine and adult human cells. Organoid-conditioned medium and medium supplemented with 1% Matrigel did not improve organoid assembly in pubertal murine cells, but immature murine cells rescued the assembly of adult murine cells when cultured together as age-chimeric cell mixtures. In murine organoids cultured for 14 d, tubule-like structures exhibiting a highly biomimetic architecture were characterized, including some rare germ and spermatogonial stem cells. These structural organoids secreted high levels of testosterone and inhibin B over 12 weeks with preserved responsivity to gonadotropins. Collectively these studies, in which cellular self-assembly and organoid formation was achieved independent of the culture microenvironment, suggest that self-assembly is an innate property of immature testicular cells independent from, but capable of being promoted by, the culture environment. This study provides a template for studying testicular organoid self-assembly and endocrine function, and a platform for improving the engineering of functional testicular tissues.

Engineered reproductive tissues

Engineered male and female biomimetic reproductive tissues are being developed as autonomous in vitro units or as integrated multi-organ in vitro systems to support germ cell and embryo function, and to display characteristic endocrine phenotypic patterns, such as the 28-day human ovulatory cycle. In this Review, we summarize how engineered reproductive tissues facilitate research in reproductive biology, and overview strategies for making engineered reproductive tissues that might eventually allow the restoration of reproductive capacity in patients.