Photophysics of BODIPY Dyes as Readily-Designable Photosensitisers in Light-Driven Proton Reduction

Triplet-Triplet Annihilation Upconverting Liposomes: Mechanistic Insights into the Role of Membranes in Two-Dimensional TTA-UC

Triplet-triplet annihilation upconversion (TTA-UC) implemented in nanoparticle assemblies is of emerging interest in biomedical applications, including in drug delivery and imaging. As it is a bimolecular process, ensuring sufficient mobility of the sensitizer and annihilator to facilitate effective collision in the nanoparticle is key. Liposomes can provide the benefits of two-dimensional confinement and condensed concentration of the sensitizer and annihilator along with superior fluidity compared to other nanoparticle assemblies. They are also biocompatible and widely applied across drug delivery modalities. However, there are relatively few liposomal TTA-UC systems reported to date, so systematic studies of the influence of the liposomal environment on TTA-UC are currently lacking. Here, we report the first example of a BODIPY-based sensitizer TTA-UC system within liposomes and use this system to study TTA-UC generation and compare the relative intensity of the anti-Stokes signal for this system as a function of liposome composition and membrane fluidity. We report for the first time on time-resolved spectroscopic studies of TTA-UC in membranes. Nanosecond transient absorption data reveal the BODIPY-perylene dyad sensitizer has a long triplet lifetime in liposome with contributions from three triplet excited states, whose lifetimes are reduced upon coinclusion of the annihilator due to triplet-triplet energy transfer, to a greater extent than in solution. This indicates triplet energy transfer between the sensitizer and the annihilator is enhanced in the membrane system. Molecular dynamics simulations of the sensitizer and annihilator TTA collision complex are modeled in the membrane and confirm the co-orientation of the pair within the membrane structure and that the persistence time of the bound complex exceeds the TTA kinetics. Modeling also reliably predicted the diffusion coefficient for the sensitizer which matches closely with the experimental values from fluorescence correlation spectroscopy. The relative intensity of the TTA-UC output across nine liposomal systems of different lipid compositions was explored to examine the influence of membrane viscosity on upconversion (UC). UC showed the highest relative intensity for the most fluidic membranes and the weakest intensity for highly viscous membrane compositions, including a phase separation membrane. Overall, our study reveals that the co-orientation of the UC pair within the membrane is crucial for effective TTA-UC within a biomembrane and that the intensity of the TTA-UC output can be tuned in liposomal nanoparticles by modifying the phase and fluidity of the liposome. These new insights will aid in the design of liposomal TTA-UC systems for biomedical applications.

Light-Induced Charge Separation in Covalently Linked BODIPY-Quinone-Alkyne Dyads

Visible light-induced charge separation and directional charge transfer are cornerstones for artificial photosynthesis and the generation of solar fuels. Here, we report synthetic access to a series of noble metal-free donor-acceptor dyads based on bodipy light-absorbers and redox-active quinone/anthraquinone charge storage sites. Peripheral functionalization of the quinone/anthraquinone units with alkynes primes the dyads for integration into a range of light-harvesting systems, e. g., by Cu-catalyzed cycloadditions (CLICK chemistry) or Pd-catalyzed C-C cross-coupling reactions. Initial photophysical, electrochemical and theoretical analyses reveal the principal processes during the light-induced charge separation in the reported dyads.

Diiodo-BODIPY Sensitizing of the [Mo3S13]2- Cluster for Noble-Metal-Free Visible-Light-Driven Hydrogen Evolution within a Polyampholytic Matrix

We report on a photocatalytic setup that utilizes the organic photosensitizer (PS) diiodo-BODIPY and the non-precious-metal-based hydrogen evolution reaction (HER) catalyst (NH₄)₂[Mo₃S₁₃] together with a polyampholytic unimolecular matrix poly(dehydroalanine)-graft-poly(ethylene glycol) (PDha-g-PEG) in aqueous media. The system shows exceptionally high performance with turnover numbers (TON > 7300) and turnover frequencies (TOF > 450 h^-1) that are typical for noble-metal-containing systems. Excited-state absorption spectra reveal the formation of a long-lived triplet state of the PS in both aqueous and organic media. The system is a blueprint for developing noble-metal-free HER in water. Component optimization, e.g., by modification of the meso substituent of the PS and the composition of the HER catalyst, is further possible.

XPS and quantum chemical analysis of 4Me-BODIPY derivatives

The results of a X-ray photoelectron spectroscopy (XPS) and steady-state absorption spectroscopy study of the electronic structure, and cationic and excited states of a series of 1,3,5,7-tetramethyl-substituted BODIPYs (4Me,2R-BODIPYs) are presented. The experimental data were interpreted using high-level ab initio quantum chemical computations, including the algebraic diagrammatic construction method for the polarization propagator of the second order (ADC(2)), the outer-valence Green's function (OVGF) method, the density functional (DFT) approach, and the time-dependent DFT (TD-DFT) approach. Substitution effects on the XPS and absorption spectra were determined for 2,6-positions of 4Me,2R-BODIPY pyrrole nuclei (R = H, Br, Bu, benzyl). A very satisfactory performance of the DFT Koopmans theorem analogue was demonstrated with respect to the energy intervals between the electronic levels of 4Me,2R-BODIPY above 13 eV (BHHLYP functional) and the values of the HOMO-LUMO energy gap (ωB97X functional).

BODIPY-Tagged Platinum(II) Curcumin Complexes for Endoplasmic Reticulum-Targeted Red Light PDT

[Pt(RB)(Cur)]NO₃ (RBC), [Pt(IRB)(Cur)]NO₃ (IRBC), and [Pt(L)(Cur)]NO₃ (PBC), where HCur is curcumin, L is 1-benzyl-2-(2-pyridyl)benzimidazole, and RB and IRB are red-light-active non-iodo and diiodo-BODIPY tagged to L, respectively, were synthesized and characterized, and their anticancer activities were studied (BODIPY, boron-dipyrromethene). RBC and IRBC displayed BODIPY-centered absorption bands within 615-635 nm along with the respective curcumin bands at 445 and 492 nm in 10% dimethyl sulfoxide (DMSO)-Dulbecco's phosphate-buffered saline (DPBS). Emission bands were observed at 723 and 845 nm for RBC and IRBC, respectively, in 10% DMSO-DPBS. RBC (Φ_Δ, 0.27) and IRBC (Φ_Δ, 0.40) generated singlet oxygen in red light (λ = 642 nm) as evidenced from 1,3-diphenylisobenzofuran (DPBF) titrations. The formation of ¹O₂ from BODIPY and HO^• from the curcumin was evidenced from the mechanistic pUC19 DNA photocleavage studies. The BODIPY complexes showed photocytotoxicity in A549, HeLa, and MDA-MB-231 cells while being less toxic in the dark [IC₅₀: 1.3-6.9 μM, red light; 7.2-12.8 μM, 400-700 nm visible light]. The emissive RBC displayed localization in the endoplasmic reticulum (ER). Apoptotic cell death was evidenced from the Annexin-V/fluorescein isothiocyanate (FITC)/propidium iodide (PI) assay and green fluorescence in red light in the Fluo-4 AM assay due to ER stress, and mitochondrial dysfunction was evidenced from the 5,5,6,6'-tetrachloro-1,1',3,3'-tetraethylbenzimidazolylcarbocyanine iodide (JC-1) assay in A549 cells.

Radiative lifetime of a BODIPY dye as calculated by TDDFT and EOM-CCSD methods: solvent and vibronic effects

The radiative emission lifetime and associated S₁ excited state properties of a BODIPY dye are investigated with TDDFT and EOM-CCSD calculations. The effects of a solvent are described with the polarizable continuum model using the linear response (LR) approach as well as state-specific methods. The Franck-Condon (FC), Herzberg-Teller (HT) and Duschinsky vibronic effects are evaluated for the absorption and emission spectra, and for the radiative lifetime. The transition energies, spectra shapes and radiative lifetime are assessed with respect to experimental results. It is found that the TDDFT transition energies are overestimated by about 0.4-0.5 eV, whereas EOM-CCSD improves the vertical emission energy by about 0.1 eV in comparison to TDDFT. The solvatochromic and Stokes shifts are better reproduced by the state-specific solvation methods, which show that these methods are more suited than the LR model to describe the solvent effects on the BODIPY dye. The vibronic effects lead to an increase of the radiative lifetime of about 0.4 to 1.0 ns depending on the theoretical approach, which highlights the importance of such effects. Moreover, the HT effects are negligible on both the spectra and lifetime, which demonstrates that the FC approximation is accurate for the BODIPY dye. Finally, the comparison with experimental data shows that the radiative lifetimes predicted by EOM-CCSD and TDDFT have comparable accuracy.

Covalent Linkage of BODIPY-Photosensitizers to Anderson-Type Polyoxometalates Using CLICK Chemistry

The covalent attachment of molecular photosensitizers (PS) to polyoxometalates (POMs) opens new pathways to PS‐POM dyads for light‐driven charge‐transfer and charge‐storage. Here, we report a synthetic route for the covalent linkage of BODIPY‐dyes to Anderson‐type polyoxomolybdates by using CLICK chemistry (i. e. copper‐catalyzed azide‐alkyne cycloaddition, CuAAC). Photophysical properties of the dyad were investigated by combined experimental and theoretical methods and highlight the role of both sub‐components for the charge‐separation properties. The study demonstrates how CLICK chemistry can be used for the versatile linkage of organic functional units to molecular metal oxide clusters.

Dirhodium-Based Supramolecular Framework Catalyst for Visible-Light-Driven Hydrogen Evolution

The direct conversion of solar energy to clean fuels as alternatives to fossil fuels is an important approach for addressing the global energy shortage and environmental problems. Here, we introduce a new dirhodium-complex-based framework assembly as a heterogeneous molecule-based photocatalyst for hydrogen evolution using visible light. Two dirhodium complexes bearing visible-light-harvesting BODIPY (boron dipyrromethene, BDP) moieties were newly designed and synthesized. The obtained complexes were self-assembled to framework structures (supramolecular framework catalysts), which are stabilized intermolecular noncovalent interactions. These frameworks retained excellent visible-light-harvesting properties of BDP moieties. Investigation of the catalytic performance of the supramolecular framework catalysts revealed that the supramolecular framework catalyst with heavy atoms at BDP moieties exhibited excellent performance in the formation of hydrogen with a reaction rate of 275.8 μmol g^-1 h^-1 under irradiation of visible light, whereas the supramolecular framework catalyst without heavy atoms at BDP moieties was inactive. Moreover, the system has the additional benefits of high durability (up to 96 h), reusability, and facile removal from the reaction mixture. We also disclosed the effect of heavy atoms at BDP moieties on the catalytic activity and proposed a reaction mechanism.

Photochemical Properties and Stability of BODIPY Dyes

The present study is devoted to the combined experimental and theoretical description of the photophysical properties and photodegradation of the new boron-dipyrromethene (BODIPY) derivatives obtained recently for biomedical applications, such as bacteria photoinactivation (Piskorz et al., Dyes and Pigments 2020, 178, 108322). Absorption and emission spectra for a wide group of solvents of different properties for the analyzed BODIPY derivatives were investigated in order to verify their suitability for photopharmacological applications. Additionally, the photostability of the analyzed systems were thoroughly determined. The exposition to the UV light was found first to cause the decrease in the most intensive absorption band and the appearance of the hypsochromically shifted band of similar intensity. On the basis of the chromatographic and computational study, this effect was assigned to the detachment of the iodine atoms from the BODIPY core. After longer exposition to UV light, photodegradation occurred, leading to the disappearance of the intensive absorption bands and the emergence of small intensity signals in the strongly blue-shifted range of the spectrum. Since the most intensive bands in original dyes are ascribed to the molecular core bearing the BF₂ moiety, this result can be attributed to the significant cleavage of the BF₂ ring. In order to fully characterize the obtained molecules, the comprehensive computational chemistry study was performed. The influence of the intermolecular interactions for their absorption in solution was analyzed. The theoretical data entirely support the experimental outcomes.

Design of BODIPY dyes as triplet photosensitizers: electronic properties tailored for solar energy conversion, photoredox catalysis and photodynamic therapy

BODIPYs are renowned fluorescent dyes with strong and tunable absorption in the visible region, high thermal and photo-stability and exceptional fluorescence quantum yields. Transition metal complexes are the most commonly used triplet photosensitisers, but, recently, the use of organic dyes has emerged as a viable and more sustainable alternative. By proper design, BODIPY dyes have been turned from highly fluorescent labels into efficient triplet photosensitizers with strong absorption in the visible region (from green to orange). In this perspective, we report three design strategies: (i) halogenation of the dye skeleton, (ii) donor-acceptor dyads and (iii) BODIPY dimers. We compare pros and cons of these approaches in terms of optical and electrochemical properties and synthetic viability. The potential applications of these systems span from energy conversion to medicine and key examples are presented.

A Time-Resolved Spectroscopic Investigation of a Novel BODIPY Copolymer and Its Potential Use as a Photosensitiser for Hydrogen Evolution

A novel 4,4-difuoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) copolymer with diethynylbenzene has been synthesised, and its ability to act as a photosensitiser for the photocatalytic generation of hydrogen was investigated by time-resolved spectroscopic techniques spanning the ps- to ns-timescales. Both transient absorption and time-resolved infrared spectroscopy were used to probe the excited state dynamics of this photosensitising unit in a variety of solvents. These studies indicated how environmental factors can influence the photophysics of the BODIPY polymer. A homogeneous photocatalytic hydrogen evolution system has been developed using the BODIPY copolymer and cobaloxime which provides hydrogen evolution rates of 319 μmol h⁻¹ g⁻¹ after 24 h of visible irradiation.

Toward Quantitative Prediction of Fluorescence Quantum Efficiency by Combining Direct Vibrational Conversion and Surface Crossing: BODIPYs as an Example

Accurate theoretical description of the electronic structure of boron dipyrromethene (BODIPY) molecules has been a challenge, let alone the prediction of fluorescence quantum efficiency. In this Letter, we show that the electronic structures of BODIPYs can be accurately evaluated via the spin-flip time-dependent density functional theory with the B3LYP functional. With the resulting electronic structures, the experimental spectral line shapes of representative BODIPYs are successfully reproduced by our previously developed thermal vibration correlation function method. Most importantly, a two-channel scheme is proposed to describe the internal conversion of S₁ to S₀ in BODIPYs: channel I via direct vibrational relaxation within the harmonic region and channel II via a distorted S₀/S₁ minimum energy crossing point well away from the harmonic region. The fluorescence quantum yields are accurately predicted within this two-channel scheme, which can therefore serve as a generalized method for predicting the photophysical parameters of organic fluorescent compounds.

Fluorescence upconversion by triplet-triplet annihilation in all-organic poly(methacrylate)-terpolymers

Fluorescence upconversion by triplet-triplet annihilation is demonstrated for a fully polymer-integrated material, i.e. in the limit of restricted diffusion. Organic sensitizer and acceptor are covalently attached to a poly(methacrylate) backbone, yielding a metal-free macromolecular all-in-one system for fluorescence upconversion. Due to the spatial confinement of the optically active molecular components, i.e. annihilator and sensitizer, UC by TTA in the constrained polymer system in solution is achieved at exceptionally low averaged annihilator concentrations. However, the UC quantum yield in the investigated systems is found to be low, highlighting that only chromophores in specific local surroundings yield upconversion in the limit of restricted diffusion. A photophysical model is proposed taking the heterogeneous local environment within the polymers into account.

BODIPY Dyes Bearing Multibranched Fluorinated Chains: Synthesis, Structural, and Spectroscopic Studies

A small series of boron-dipyrromethene (BODIPY) dyes, characterized by the presence of multibranched fluorinated residues, were designed and synthesized. The dyes differ in both the position (para-perfluoroalkoxy-substituted phenyl ring or boron functionalization) and number of magnetically equivalent fluorine atoms (27 or 54 fluorine atoms per molecule). Photophysical and crystallographic characterization of the synthesized BODIPYs was carried out to evaluate the effect of the presence of highly fluorinated moieties on the optical and morphological properties of such compounds.

Linker length in fluorophore–cholesterol conjugates directs phase selectivity and cellular localisation in GUVs and live cells

Lipid membrane fluorescent probes that are both domain-selective and compatible with demanding microscopy methods are crucial to elucidate the presence and function of rafts and domains in cells and biophysical models. Whereas targeting fluorescent probes to liquid-disordered (L_d) domains is relatively facile, it is far more difficult to direct probes with high selectivity to liquid-ordered (L_o) domains. Here, a simple, one-pot approach to probe–cholesterol conjugation is described using Steglich esterification to synthesise two identical BODIPY derivatives that differ only in the length of the aliphatic chain between the dye and cholesterol. In the first, BODIPY-Ar-Chol, the probe and cholesterol were directly ester linked and in the second BODIPY-Ahx-Chol, a hexyl linker separated probe from cholesterol. Uptake and distribution of each probe was compared in ternary, phase separated giant unilamellar vesicles (GUVs) using a commercial L_d marker as a reference. BODIPY-Ar-Chol targets almost exclusively the L_d domains with selectivity of >90% whereas by contrast introducing the C₆ linker between the probe and cholesterol drove the probe to L_o with excellent selectivity (>80%). The profound impact of the linker length extended also to uptake and distribution in live mammalian cells. BODIPY-Ahx-Chol associates strongly with the plasma membrane where it partitioned preferably into opposing micron dimensioned do-mains to a commercial L_d marker and its concentration at the membrane was reduced by cyclodextrin treatment of the cells. By contrast the BODIPY-Ahx-Chol permeated the membrane and localised strongly to lipid droplets within the cell. The data demonstrates the profound influence of linker length in cholesterol bioconjugates in directing the probe.

By inserting a hexyl linker between a BODIPY probe and cholesterol pendant, the localization of the probe at ternary phase separated GUVs switches from L_d to L_o domains with high specificity.

Tethered sensitizer-catalyst noble-metal-free molecular devices for solar-driven hydrogen generation

Inspired by natural photosynthesis in an organized assembly, compact H2-evolving molecular devices, which tether sensitizer and catalyst modules in one single molecule, present an opportunity to overcome the diffusion limit required for multi-component molecular systems, and increase intramolecular electron transfer rates from the photoactivated unit to the catalytic center to improve H2-evolving efficiency. Thereinto absolutely noble-metal free H2-evolving molecular devices are of particular interest because they don't contain precious and scarce noble-metal based components. This Frontier article focuses specifically on the recent advances in the design, synthesis, and photocatalytic properties of all-abundant-element molecular devices for photoinduced H2 generation via intramolecular processes. Some challenges and suggestions for future directions in this field are also illustrated.

Photo-Induced Charge Separation vs. Degradation of a BODIPY-Based Photosensitizer Assessed by TDDFT and RASPT2

A meso-mesityl-2,6-iodine substituted boron dipyrromethene (BODIPY) dye is investigated using a suite of computational methods addressing its functionality as photosensitizer, i.e., in the scope of light-driven hydrogen evolution in a two-component approach. Earlier reports on the performance of the present iodinated BODIPY dye proposed a significantly improved catalytic turn-over compared to its unsubstituted parent compound based on the population of long-lived charge-separated triplet states, accessible due to an enhanced spin-orbit coupling (SOC) introduced by the iodine atoms. The present quantum chemical study aims at elucidating the mechanisms of both the higher catalytic performance and the degradation pathways. Time-dependent density functional theory (TDDFT) and multi-state restricted active space perturbation theory through second-order (MS-RASPT2) simulations allowed identifying excited-state channels correlated to iodine dissociation. No evidence for an improved catalytic activity via enhanced SOCs among the low-lying states could be determined. However, the computational analysis reveals that the activation of the dye proceeds via pathways of the (prior chemically) singly-reduced species, featuring a pronounced stabilization of charge-separated species, while low barriers for carbon-iodine bond breaking determine the photostability of the BODIPY dye.

Demonstrating the role of anchoring functionality in interfacial electron transfer dynamics in the newly synthesized BODIPY–TiO2 nanostructure composite

Scheme illustrating the extent of coupling and charge recombination dynamics between BODIPY and NS-TiO₂ anchoring through the catechol and resorcinol binding group.