Silver Nanoparticle-PEDOT:PSS Composites as Water-Processable Anodes: Correlation between the Synthetic Parameters and the Optical/Morphological Properties

The morphological, spectroscopic and rheological properties of silver nanoparticles (AgNPs) synthesized in situ within commercial PEDOT:PSS formulations, labeled PP@NPs, were systematically investigated by varying different synthetic parameters (NaBH4/AgNO3 molar ratio, PEDOT:PSS formulation and silver and PEDOT:PSS concentration in the reaction medium), revealing that only the reagent ratio affected the properties of the resulting nanoparticles. Combining the results obtained from the field-emission scanning electron microscopy analysis and UV-Vis characterization, it could be assumed that PP@NPs' stabilization occurs by means of PSS chains, preferably outside of the PEDOT:PSS domains with low silver content. Conversely, with high silver content, the particles also formed in PEDOT-rich domains with the consequent perturbation of the polaron absorption features of the conjugated polymer. Atomic force microscopy was used to characterize the films deposited on glass from the particle-containing PEDOT:PSS suspensions. The film with an optimized morphology, obtained from the suspension sample characterized by the lowest silver and NaBH4 content, was used to fabricate a very initial prototype of a water-processable anode in a solar cell prepared with an active layer constituted by the benchmark blend poly(3-hexylthiophene) and [6,6]-Phenyl C61 butyric acid methyl ester (PC60BM) and a low-temperature, not-evaporated cathode (Field's metal).

Synthesis and Study of the Optical Properties of a Conjugated Polymer with Configurational Isomerism for Optoelectronics

A π-conjugated polymer (PBQT) containing bis-(2-ethylhexyloxy)-benzo [1,2-b'] bithiophene (BDT) units alternated with a quinoline-vinylene trimer was obtained by the Stille reaction. The chemical structure of the polymer was verified by nuclear magnetic resonance (¹H NMR), Fourier transform infrared (FT-IR), and mass spectroscopy (MALDI-TOF). The intrinsic photophysical properties of the solution were evaluated by absorption and (static and dynamic) fluorescence. The polymer PBQT exhibits photochromism with a change in absorption from blue (449 nm) to burgundy (545 nm) and a change in fluorescence emission from green (513 nm) to orange (605 nm) due to conformational photoisomerization from the trans to the cis isomer, which was supported by theoretical calculations DFT and TD-DFT. This optical response can be used in optical sensors, security elements, or optical switches. Furthermore, the polymer forms spin-coated films with absorption properties that cover the entire visible range, with a maximum near the solar emission maximum. The frontier molecular orbitals, HOMO and LUMO, were calculated by cyclic voltammetry, and values of -5.29 eV and -3.69, respectively, and a bandgap of 1.6 eV were obtained, making this material a semiconductor with a good energetic match. These properties could suggest its use in photovoltaic applications.

Photophysical and Electrochemical Properties of Push-Pull Oligo(ferrocenyl-phenyleneethynylene)s: Supramolecular Orders in Molecular Films

We report on the optoelectronic properties of a series of unsymmetrical π-conjugated phenyleneethynylene macromolecules bearing ferrocene (Fc) as the electron-donor group (D), (benzyl) benzoate (Bz) or benzoic acid (Ac) as the electron attractor group (A) and connected through 2,5-di(alcoxy) phenyleneethynylene(s) (nPE) with n = 1, 2, 3 as π-conjugated bridges. In the series, by increasing the distance between the electron-attracting and electron-donor groups, the push-pull effect decreases. The intramolecular charge transfer (D → π → A) was evaluated by static and dynamic spectroscopy, electrochemistry, and density functional theory (DFT) theoretical calculations. The longest oligomer Fc3PEBz formed the best optical quality films. A study at the atomic level by scanning tunneling microscopy (STM) revealed that the molecules self-assemble on highly ordered pyrolytic graphite (HOPG) in domains with a short-range order. Films are mesoporous and the molecules arrange in a lamellar-like pattern, with an edge-on conformation with respect to HOPG, where the conjugated backbones lie parallel to the surface. Two different assemblies were identified in the monoatomic film, which depends on the ferrocene-ferrocene or benzyl-benzyl interactions.

Rod-Coil Block Copolymer: Fullerene Blend Water-Processable Nanoparticles: How Molecular Structure Addresses Morphology and Efficiency in NP-OPVs

The use of water-processable nanoparticles (WPNPs) is an emerging strategy for the processing of organic semiconducting materials into aqueous medium, dramatically reducing the use of chlorinated solvents and enabling the control of the nanomorphology in OPV active layers. We studied amphiphilic rod-coil block copolymers (BCPs) with a different chemical structure and length of the hydrophilic coil blocks. Using the BCPs blended with a fullerene acceptor material, we fabricated NP-OPV devices with a sustainable approach. The goal of this work is to clarify how the morphology of the nanodomains of the two active materials is addressed by the hydrophilic coil molecular structures, and in turn how the design of the materials affects the device performances. Exploiting a peculiar application of TEM, EFTEM microscopy on WPNPs, with the contribution of AFM and spectroscopic techniques, we correlate the coil structure with the device performances, demonstrating the pivotal influence of the chemical design over material properties. BCP5, bearing a coil block of five repeating units of 4-vinilpyridine (4VP), leads to working devices with efficiency comparable to the solution-processed ones for the multiple PCBM-rich cores morphology displayed by the blend WPNPs. Otherwise, BCP2 and BCP15, with 2 and 15 repeating units of 4VP, respectively, show a single large PCBM-rich core; the insertion of styrene units into the coil block of BCP100 is detrimental for the device efficiency, even if it produces an intermixed structure.

Fluorescence detection of pyrene-stained Bacillus subtilis LPM1 rhizobacteria from colonized patterns of tomato roots

A series of water soluble 8-alcoxypyrene-1,3,6-trisulfonic sodium salts bearing different alcoxy lateral chains and functional end groups was synthesized and the molecular structure was corroborated by nuclear magnetic resonance spectroscopy. The photophysical properties in water analyzed by UV-Vis and static and dynamic fluorescence revealed that all of the pigments emit in the blue region at a maximal wavelength of 436 nm and with fluorescence lifetimes in the range of ns. Among them, sodium 8-((10-carboxydecyl) oxy) pyrene-1,3,6-trisulfonate M1 exhibits a high fluorescence quantum yield (φ = 80%) and a good interaction with B. subtilis LPM1 rhizobacteria; this has been demonstrated through in vitro staining assays. Tomato plants (Solanum lycopersicon cv. Micro-Tom) increased the release of root exudates, mainly malic and fumaric acids, after 12 h of treatment with benzothiadiazole (BTH) as a foliar elicitor. However, the chemotaxis analysis demonstrated that malic acid is the most powerful chemoattractant of the rhizobacteria Bacillus subtilis LPM1: in agar plates, a major growth (60 mm) was found for a concentration of 100 mM, while in capillary tubes, the earliest response was at 30 min with 3.3 × 108 CFU mL-1. The confocal microscopic analysis carried out on the tomato roots of the pyrene stained B. subtilis LPM1 revealed that this bacterium mainly colonizes the epidermal zones, i.e. the junctions to primary roots, lateral roots and root hairs, meaning that these root hair sections are the highest colonisable sites involved in the biosynthesis of exudates. This fluorescent pyrene marker M1 represents a valuable tool to evaluate B. subtilis-plant interactions in an easy and quick test in both in vitro and in vivo tomato crops.

Dual Emission of meso-Phenyleneethynylene-BODIPY Oligomers: Synthesis, Photophysics, and Theoretical Optoelectronic Study

Two series of 2,5-di(butoxy)phenyleneethynylenes, one halogenated (nPEC4-X; n=2, 3, or 4) and the other boron-dipyrromethene (BODIPY) terminated (nPEC4-By; n=3, 4, or 5; By=BODIPY), were synthesized monodirectionally by the step-by-step approach and the molecular structure was corroborated by NMR spectroscopy (¹ H, ¹³ C-DEPTQ-135, COSY, HSQC, HMBC, ¹¹ B, ¹⁹ F) and MALDI-TOF mass spectrometry. The multiplicity and J-coupling constants of ¹ H, ¹¹ B, and ¹⁹ F/¹¹ B NMR signals revealed, in the nPEC4-By series, that the phenyl in the meso position of BODIPY becomes electronically part of the conjugation of the phenyleneethynylene chain, whereas BODIPY is electronically isolated. The photophysical, electrochemical, and theoretical studies confirm this finding because the properties of nPEC4-By are comparable to those of the nPEC4-X oligomers and BODIPY, indicating negligible electron communication between BODIPY and the nPEC4 moieties. Nevertheless, energy transfer (ET) from nPEC4 to BODIPY was rationalized by spectroscopy and theoretical calculations. Its yield decreases with the nPEC4 conjugation length, according to the increase in distance between the two chromophores, resulting in dual emission for the longest oligomer in which ET is quenched.

Nanoscale Organization of a Platinum(II) Acetylide Cholesteric Liquid Crystal Molecular Glass for Photonics Applications

The fabrication, molecular structure, and spectroscopy of a stable cholesteric liquid crystal platinum acetylide glass obtained from trans-Pt(PEt3)2(C≡C-C6H5-C≡N)(C≡C-C6H5-COO-Cholesterol), are described and designated as PE1-CN-Chol. Polarized optical microscopy, differential scanning calorimetry, and wide-angle X-ray scattering experiments show room temperature glassy/crystalline texture with crystal formation upon heating to 165 °C. Further heating results in conversion to cholesteric phase. Cooling to room temperature leads to the formation of a cholesteric liquid crystal glass. Scanning tunneling microscopy of a PE1-CN-Chol monolayer reveals self-assembly at the solid-liquid interface with an array of two molecules arranged in pairs, oriented head-to-head through the CN groups, giving rise to a lamella arrangement. The lamella structure obtained from molecular dynamics calculations shows a clear phase separation between the conjugated platinum acetylide and the hydrophobic cholesterol moiety with the lamellae separation distance being 4.0 nm. Ultrafast transient absorption and flash photolysis spectra of the glass show intersystem crossing to the triplet state occurring within 100 ps following excitation. The triplet decay time of the film compared to aerated and deoxygenated solutions is consistent with oxygen quenching at the film surface but not within the film. The high chromophore concentration, high glass thermal stability, and long triplet lifetime in air show that these materials have potential as nonlinear absorbing materials.

BODIPY Dyes Bearing Multibranched Fluorinated Chains: Synthesis, Structural, and Spectroscopic Studies

A small series of boron-dipyrromethene (BODIPY) dyes, characterized by the presence of multibranched fluorinated residues, were designed and synthesized. The dyes differ in both the position (para-perfluoroalkoxy-substituted phenyl ring or boron functionalization) and number of magnetically equivalent fluorine atoms (27 or 54 fluorine atoms per molecule). Photophysical and crystallographic characterization of the synthesized BODIPYs was carried out to evaluate the effect of the presence of highly fluorinated moieties on the optical and morphological properties of such compounds.

Hollow ZnO microspheres functionalized with electrochemical graphene oxide for the photodegradation of salicylic acid

Hollow ZnO microspheres were successfully synthesized by a hydrothermal method and then functionalized with graphene oxide (GO) flakes, previously obtained through electrochemical oxidation. Their photocatalytic activity toward the photodegradation of salicylic acid under UV light irradiation was evaluated by UV-Vis spectroscopy. Unfunctionalized microspheres and ZnO functionalized with chemically oxidized graphene were also studied as comparative terms. The hybrid materials of ZnO with both electrochemical and chemical GO gave a similar photodegradation yield of ∼28% against 18% of the non-functionalized microspheres. The similar degradation yields and rate constants obtained with the two GO synthetic methods indicate that electrochemical oxidation of GO represents an eco-friendly option over traditional methods for photocatalytic degradation systems.

Hollow ZnO microspheres were successfully synthesized by a hydrothermal method and then functionalized with graphene oxide (GO) flakes, previously obtained through electrochemical oxidation.

Synthesis and photophysical properties of conjugated (dodecyl)benzoateethynylene macromolecules: staining ofBacillus subtilisandEscherichia colirhizobacteria

The staining of agrobacteria was successfully demonstrated through a benzoateethynylene by fluorescence spectroscopy, laser confocal microscopy and microRaman.

Spontaneous Symmetry Breaking Facilitates Metal-to-Ligand Charge Transfer: A Quantitative Two-Photon Absorption Study of Ferrocene-phenyleneethynylene Oligomers

Change of the permanent molecular electric dipole moment, Δμ, in a series of nominally centrosymmetric and noncentrosymmteric ferrocene-phenyleneethynylene oligomers was estimated by measuring the two-photon absorption cross-section spectra of the lower energy metal-to-ligand charge-transfer transitions using femtosecond nonlinear transmission method and was found to vary in the range up to 12 D, with the highest value corresponding to the most nonsymmetric system. Calculations of the Δμ performed by the TD-DFT method show quantitative agreement with the experimental values and reveal that facile rotation of the ferrocene moieties relative to the organic ligand breaks the ground-state inversion symmetry in the nominally symmetric structures.

One-pot microwave-assisted synthesis of organotin Schiff bases: an optical and electrochemical study towards their effects in organic solar cells

One-pot microwave synthesized organotin compound has been employed as good electro-acceptor (EA) and cheap for organic photovoltaic (OPV) solar cells.

Synthesis of mercaptopropyl-(phenylene)s-benzoates passivated gold nanoparticles: Implications for plasmonic photovoltaic cells

The incorporation of gold nanoparticles in heterojunction solar cells is expected to increase the efficiency due to plasmon effects, but the literature studies are sometimes controversial. In this work, gold nanoparticles passivated with (Ph)n-(CH2)3SH (n=1, 2, 3) have been synthesized by reduction of tetrachloroauric acid with sodium borohydride in two ways: (1) one-phase where both the thiol and the gold salt are solubilized in a mixture of methanol with acetic acid: Au-s-(Ph)n or (2), two-phase, using tetraoctylammonium bromide (TOAB) to transfer gold from water to toluene where the thiol is solubilized, Au(TOAB)-s-(Ph)n. The morphological, experimental and simulated optical properties were studied and analyzed as a function of the thiol and of the synthetic procedure in order to correlate them with the efficiency of plasmonic hybrid solar cells in the following configuration ITO/PEDOT:PSS/P3HT:PCBM-C60:Au-nanoparticles/Field's metal, where

PEDOT

PSS is poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), P3HT is poly(3-hexylthiophene-2,5-diyl) and PCBM-C60 is [6,6]-Phenyl C61 butyric acid methyl ester. Our findings indicate that the gold nanoparticles incorporation is affecting the electrical properties of the active layer giving a maximum efficiency for Au-s-(Ph)3. Moreover, TOAB, which is usually used in the synthesis of thiol passivated gold nanoparticles, has negative effects in both plasmonic and electrical properties. This result is important for optoelectronic applications of gold nanoparticles prepared with any procedures that involve TOAB.

Supramolecular Order of 2,5-Bis(dodecanoxy)phenyleneethynylene-Butadiyne Oligomers in the Solid State

The supramolecular order of a 2,5-bis(dodecanoxy)phenyleneethynylene-butadiyne series of rod-like oligomers with 2, 4, 6, and 8 phenyleneethynylene moieties was studied in the solid state by differential scanning calorimetry (DSC), temperature-dependent small- and wide-angle X-ray scattering (SWAXS), selected area electron diffraction (SAED), polarized optical microscopy (POM), high-resolution transmission microscopy (HRTEM), and scanning tunneling microscopy (STM). It was found that all of the oligomers self-assemble in blocks of molecules that resemble bricks that are randomly oriented. These oligomers are described as sanidic liquid crystals as a term to classify their mesomorphic behavior because of their brick or board-like structure. The strong π-π interaction that governs the package of conjugated backbones was evidenced by the reiterative distances of 0.36 ± 0.017 nm found by SWAXS and 0.32 ± 0.017 nm found by HRTEM. A STM study of a cast film of the tetramer deposited on highly oriented pyrolitic graphite (HOPG) allowed for the visualization and determination of the conjugated backbone length of 2.48 nm and a phenyl-phenyl distance of 0.34 nm, suggesting that the molecules are stacked in lamellae perpendicularly aligned to the substrate.

Optoelectronic properties of oligomers based on tetrazine, benzothiadiazole, benzodithiophene and thiophene moieties for photovoltaic applications: a theoretical study

In this article, a fast theoretical design approach for addressing the synthesis of new conjugated co-polymers for applications in organic photovoltaic devices is discussed.

Synthesis and photophysical and supramolecular study of π-conjugated (diethylene glycol methyl ether) benzoateethynylene oligomers and polymers

The strong π–π interaction that governs (diethylene glycol methyl ether) benzoateethynylene macromolecules was evidenced by X-ray scattering and HRTEM.

New application of fluorescent organotin compounds derived from Schiff bases: synthesis, X-ray structures, photophysical properties, cytotoxicity and fluorescent bioimaging

A novel application of fluorescent organotin compounds derived from Schiff bases was developed for imaging cells.

Silver nanoparticles functionalized in situ with the conjugated polymer (PEDOT:PSS)

Silver nanoparticles have been functionalized in situ with the electrically conducting polymer, poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) via colloidal synthesis. The formation of the functionalized silver nanoparticles, hereafter designated Ag(PEDOT:PSS), was confirmed by the appearance of the characteristic plasmon absorption peak at 420 nm in the UV-Vis spectrum of the aqueous suspension and by TEM analysis, where spherical particles with a mean size of around 8 nm (metallic core) were observed. Homogeneous thin films with granular topography, as observed by AFM, were prepared by self assembly. Electrical studies of the films showed an increase in electrical conductivity of three orders of magnitude with respect to the polymer film presumably due to the presence of the silver core. The conductive polymer/silver composite films also exhibit interesting electrochromic switching between blue and brown. These properties suggest the possibility of a variety of applications of Ag(PEDOT:PSS) films such as in electro optics devices, smart windows, amperometric sensors and capacitors.

Highly fluorescent dendrimers containing stilbene, and 4-styrylstilbene with resorcinarene cores: synthesis and optical properties

Dendron conjugated branches of stilbene and 4-styrylstilbene groups have been attached to resor-cinarene cores. A noticeable effect in solution for all dendrimers was observed in the fluorescence quantum yield. The optical properties do not change with concentration in solution. The optical properties of thin films are identical to those of the solutions indicating the absence of intermolecular interactions. The dendrimers were characterized by 1H, 13C NMR, FTIR, UV-Vis, fluorescence spectroscopy, MALDI-TOF or FAB+ mass spectrometry, and elemental analysis.

Synthesis of fluorescent dendrimers with an oligo(phenylenevinylene) core

Novel fluorescent dendrimers of first, second, and third generation bearing a conjugated oligo(phenylenevinylene) (OPV) core and peripherial allyl chains as dendrons have been synthesized by a convergent method. The compounds have been fully characterized by 1H, 13C NMR, FTIR, UV-vis, and fluorescence spectroscopy, MALDI-TOF or FAB+ mass spectroscopy and elemental analysis. All dendrimers showed in solution a blue fluorescence with a maximum wavelength at 444-446 nm and can be deposited as thin films emitting in the blue-green region. The most homogeneous films were obtained for the second generation dendrimer which also exhibits the higher quantum yield in solution. These properties make it a possible candidate for application in organic light emitting diodes (OLEDs).